Certificate Powered by TCPDF (www.tcpdf.org) Product tested Programming and Configuration Tool Certificate holder Rockwell Automation, Inc. 1201 South Second Street Milwaukee, WI 53204 USA Type designation Studio 5000 Logix Designer as listed in the current "Studio 5000 Logix Designer Revision Release List" Codes and standards EN ISO 13849-1:2015 (clause 4.6.4) IEC 61508 Parts 1-7:2010 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 (clause 6.11.2) Intended application The Studio 5000 Logix Designer and its integrated tools fulfil the requirements of IEC 61508:2010 regarding the off-line support tools classified as T3 and T2. For the T1 tools it can be confirmed the category of T1. In addition the Studio 5000 Logix Designer meets the requirements for a parameterization tool according to EN ISO 13849-1 clause 4.6.4 and EN 62061 clause 6.11.2. The integrated library elements fulfil the requirements of IEC 61508:2010 regarding systematic capability of three (SC 3) and can be used in application software developments up to safety integrity level of three (SIL 3). Specific requirements In all cases the respective constraints and restrictions mentioned in the user documentation have to be considered and the respective notifications provided on the Rockwell Automation’s internet Knowledge Base have to be taken into account. The user must validate the overall functionality of the implemented safety functions beyond the limits of the individual devices. Valid until 2023-03-23 The issue of this certificate is based upon an examination, whose results are documented in Report No. 968/FSP 1570.00/18 dated 2018-03-23. This certificate is valid only for products which are identical with the product tested. Köln, 2018-03-23 Certification Body Safety & Security for Automation & Grid www.fs-products.com Dipl.-Ing. Thomas Steffens TÜV Rheinland Industrie Service GmbH, Am Grauen Stein, 51105 Köln / Germany Tel.: +49 221 806-1790, Fax: +49 221 806-1539, E-Mail: industrie-service@de.tuv.com 10/222 12. 12 E A4 ® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval. No.: 968/FSP 1570.00/18