2/24/22, 4:07 PM
CUSTOMIZATION
A330-200/-300 - SRM - 01-Jan-2022 - TASK 51-75-12-911-013 - Renewal of Airline Finish on the external Surface of the Radome
AIRCRAFT
TYPES
DOCTYPES
REVISION
DATE
REVISION
NUMBER
TITLE
A330-200/-300
SRM
01-Jan-2022
113
TASK 51-75-12-911-013 - Renewal of Airline Finish on the external Surface of the
Radome
TAIL NUMBER - MSN - FSN:
Print date: 2022-02-24 22:07:38
TASK 51-75-12-911-013
Renewal of Airline Finish on the external Surface of the Radome
WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER INSTRUCTIONS AN
D YOUR LOCAL REGULATIONS.
WARNING: OBEY THE MATERIAL MANUFACTURER INSTRUCTIONS WHEN YOU USE PAINTS, CHROMATE AGENTS, CLEANING A
GENTS AND SPECIAL COATINGS. MOST OF THESE MATERIALS ARE DANGEROUS AND FLAMMABLE.
WARNING: DO NOT APPLY ADHESIVE TAPE ON THE PROBES, DUCTS, SENSORS (STATIC, PITOT, TAT, AOA). USE ONLY THE SP
ECIFIED TOOLS FOR THE PROTECTION OF THE AIRCRAFT. THE SPECIFIED TOOLS GIVE THE CORRECT PROTECTIO
N TO THE AIRCRAFT EQUIPMENT, ARE EASY TO SEE FROM THE GROUND AND EASY TO REMOVE. IF YOU USE TAPE,
THERE IS A RISK THAT SOME TAPE, OR ADHESIVE FROM THE TAPE, WILL STAY ON THE PROBES, DUCTS OR SENSO
RS. THIS CAN CAUSE INCORRECT INDICATIONS ON THE RELATED COCKPIT INSTRUMENTS.
WARNING: MAKE SURE THAT THE AOA SENSOR HEATER OR MFP CIRCUIT BREAKERS ARE PULLED DURING STRIPPING, PAINT
ING AND HANDLING OF THE AOA SENSOR. LET THE AOA SENSOR/MFP COOL DOWN A FEW MINUTES BEFORE MAS
KING OR HANDLING.
CAUTION: IF THE STANDARD CERTIFIED COLOR BAC 707 IS NOT TO BE USED TO RESTORE PAINT OR REPAINTING OF THE U
PPER SURFACES OF THE HORIZONTAL TAILPLANE, ELEVATOR, AILERONS, SPOILERS AND FLAPS, PLEASE CONTAC
T AIRBUS INDUSTRIE FOR APPROVAL OF THE NON-STANDARD PAINT COLOR.
CAUTION: MAKE SURE THAT THE MATERIALS, AREAS AND PARTS GIVEN BELOW ARE PROPERLY PROTECTED AGAINST PAINT
MATERIALS BY MASKING (RUBBER, ALL COMPOSITE PARTS, ACRYLIC MATERIALS, AERODYNAMIC SMOOTHER, ME
TAL BONDED EDGES, PITOT PROBES, SENSORS, STATIC PORTS, ENGINE AIR INTAKE, PRECOOLER AIR OUTLET SC
REEN, ENGINE EXHAUST DUCT, APU EXHAUST, APU INTAKES AND OUTLETS, AIR CONDITIONING FRESH AIR INTA
KE, CABIN PRESSURIZATION CONTROL SYSTEM OUTFLOW VALVE (ZONE 172), LANDING GEARS, DOOR SEALS, AC
CESS DOORS, CABIN WINDOW AND WINDSHIELD PANELS AND SEALS, ELECTRICAL EQUIPMENT AND CABLES, PLA
STIC MATERIALS, EXTERNAL SKIN PANEL JOINTS AND HIGH STRENGTH STEEL PARTS) OR BY PLUGGING (DRAIN
HOLES, VENTS).
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
1/4
2/24/22, 4:07 PM
A330-200/-300 - SRM - 01-Jan-2022 - TASK 51-75-12-911-013 - Renewal of Airline Finish on the external Surface of the Radome
AIRCRAFT
TYPES
DOCTYPES
REVISION
DATE
REVISION
NUMBER
TITLE
A330-200/-300
SRM
01-Jan-2022
113
TASK 51-75-12-911-013 - Renewal of Airline Finish on the external Surface of the
Radome
CUSTOMIZATION
TAIL NUMBER - MSN - FSN:
Print date: 2022-02-24 22:07:38
CAUTION: MASK THE ANTENNAS. FOR MORE INFORMATION ON ANTENNA PAINTING, REFER TO RENEWAL OF PAINT ON ANT
ENNAS, REFER TO TASK 51-75-12-911-010.
CAUTION: MAKE SURE THAT THE PAINT MATERIALS DO NOT COME IN CONTACT WITH TEFLON-LINED SELF-LUBRICATED BE
ARINGS, ELECTRICAL TERMINAL PLUGS, NYLON-COATED WIRES AND NYLON BRUSHES. THE CHEMICALS IN THE P
AINT MATERIALS CAN AFFECT THESE ITEMS.
CAUTION: MAKE SURE THAT ALL MASKING MATERIALS ARE REMOVED FROM THE REPAIR AREA WHEN THE WORK IS COMPLE
TED.
1.
Task Supporting Data
A.
General
NOTE:
When you do repainting near AOA sensors, we recommend that you mask the sensors.
(1)
For general requirements, refer to TASK 51-75-12-911-001.
(2)
Before you start with the repair procedure examine the depth of the damaged area. If anti-static or anti-erosion coatings
are damaged, refer to CMMv Chapter 53-51-21 for P/N F53132110000, F53132010000 and A3403220100000. CMMv Cha
pter 53-51-22 for P/N F53132210000. CMMm Chapter 53-51-11 for P/N A9232024200010, A9232024200011, A9232024
200012, A9232060600500, A9232060600600 and A9232060600700.
B.
Area of Applicability
C.
WV Applicability
D.
Limits/Restrictions
E.
Repair Category
F.
Inspections
G.
Job Set-Up Information
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
2/4
2/24/22, 4:07 PM
A330-200/-300 - SRM - 01-Jan-2022 - TASK 51-75-12-911-013 - Renewal of Airline Finish on the external Surface of the Radome
AIRCRAFT
TYPES
DOCTYPES
REVISION
DATE
REVISION
NUMBER
TITLE
A330-200/-300
SRM
01-Jan-2022
113
TASK 51-75-12-911-013 - Renewal of Airline Finish on the external Surface of the
Radome
CUSTOMIZATION
TAIL NUMBER - MSN - FSN:
Print date: 2022-02-24 22:07:38
(1)
Material References
ITEM
(2)
NOMENCLATURE
QTY
MATERIAL/REMARKS
-
Cleaning agent
AR
Material No. 11-010 (refer to the
CML)
-
Polyurethane top coat
AR
Material No. 16-018 or Material N
o. 16-059 (refer to the CML)
-
Base coat
AR
Material No. 16-064 (refer to the
CML)
-
Clear coat
AR
Material No. 16-065 (refer to the
CML)
-
Masking tape/Masking paper
AR
Local purchase
-
Abrasive paper
AR
Local purchase, grade 240 or finer
References
TASK 51-75-12-911-001
TASK 51-75-12-911-010
CMMm Chapter 53-51-11
CMMv Chapter 53-51-21
CMMv Chapter 53-51-22
2.
A.
Repair
(1)
Remove completely the airline finish with abrasive paper grade 240 or finer and chamfer the edges of the remaining paint
around the damaged area, if required.
NOTE:
If anti-erosion coating (Material No. 16-031 or Material No. 07-006 ) is damaged, refer to CMMv Chapter 53-51-
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
3/4
2/24/22, 4:07 PM
A330-200/-300 - SRM - 01-Jan-2022 - TASK 51-75-12-911-013 - Renewal of Airline Finish on the external Surface of the Radome
CUSTOMIZATION
AIRCRAFT
TYPES
DOCTYPES
REVISION
DATE
REVISION
NUMBER
TITLE
A330-200/-300
SRM
01-Jan-2022
113
TASK 51-75-12-911-013 - Renewal of Airline Finish on the external Surface of the
Radome
TAIL NUMBER - MSN - FSN:
Print date: 2022-02-24 22:07:38
21 for P/N F53132110000, F53132010000 and A3403220100000. CMMv Chapter 53-51-22 for P/N F531322100
00. CMMm Chapter 53-51-11 for P/N A9232024200010, A9232024200011, A9232024200012, A923206060050
0, A9232060600600 and A9232060600700.
(2)
Remove the abrasive grit.
(3)
Clean and degrease the repair area with cleaning agent (Material No. 11-010).
(4)
Mask off the adjacent area, which will not be treated, with masking tape/masking paper.
(5)
Apply airline finish, top coat (Material No. 16-018), or Material No. 16-059), or base/clear coat (Material No. 16-064 and
Material No. 16-065 . Do not overlap or stack different colors.
(6)
Remove the masking tape/masking taper.
(7)
Check the paint thickness, refer to TASK 51-75-12-911-001 paragraph 2.A.(1) or on test coupons
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
4/4
2/24/22, 4:16 PM
CML - 01-Feb-2022 - 04LDA3 - Chromate Free External Structure
CUSTOMIZATION
AIRCRAFT
TYPES
DOCTYPES
REVISION
DATE
REVISION
NUMBER
TITLE
CML
01-Feb-2022
41
04LDA3 - Chromate Free External
Structure
TAIL NUMBER - MSN - FSN:
Print date: 2022-02-24 22:16:27
Application Information
Applicat
ion Cod
e
04LDA3
S04 - Paints and Coatings
Application
Old Cod
Cat
e
Base Coat Polyurethane - Chromate Free Exte
16-064
rnal Structure
Application Comment
A
Products
** ON A/C ALL
Product Name
Spec
Comment
Doc
Airbus
Qualifi
ed Site
Prod
uct C
ode
Old C
ode
AIMS 04-04-025
Desothane HD 90
08 Base Coat
AIMS 04-04-033
DESOTHANE_C
A9008
45925 16-06
0
4B
AEROBASE
45928 16-06
0
4A
411_22
45930 16-06
0
4X
AIMS 04-04-037
AIMS 04-04-025
Aerobase
AIMS 04-04-033
AIMS 04-04-037
ALEXIT-H/S-BASE
COAT 411-22
AIMS 04-04-033
AIMS 04-04-037
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
1/1
2/24/22, 4:17 PM
CML - 01-Feb-2022 - 04MDA3 - Chromate Free External Structure
CUSTOMIZATION
AIRCRAFT
TYPES
DOCTYPES
REVISION
DATE
REVISION
NUMBER
TITLE
CML
01-Feb-2022
41
04MDA3 - Chromate Free External
Structure
TAIL NUMBER - MSN - FSN:
Print date: 2022-02-24 22:16:55
Application Information
Applicat
ion Cod
e
04MDA3
S04 - Paints and Coatings
Application
Old Cod
Cat
e
Clear coat Polyurethane - Chromate Free Exte
16-065
rnal Structure
Application Comment
A
Products
** ON A/C ALL
Product Name
Spec
Airbus
Qualifi
ed Site
Prod
uct C
ode
Old C
ode
Comment
Doc
Spot Repair op
tional
DESOTHANE_C
A9008B0900D
46985 16-06
0
5B
Spot Repair op
tional
AVIOX_CLEAR
COAT_UVR
46988 16-06
0
5A
ALEXIT_411_1
4
46990 16-06
0
5X
AIMS 04-04-023
Desothane HD 90
08 Clear Coat
AIMS 04-04-025
AIMS 04-04-033
AIMS 04-04-037
AIMS 04-04-025
AVIOX CLEARCOA
T UVR & Spot Rep AIMS 04-04-033
air
AIMS 04-04-037
AIMS 04-04-023
ALEXIT-H/S-CLEA
R COAT 411-14
AIMS 04-04-033
AIMS 04-04-037
© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
1/1