Compact Laser Sensor NEW LR-X Series SMALL SIZE STABLE DETECTION LR - X Series Unmatched Stability In A Remarkably Small Footprint 2 Compact Laser Sensor LR-X Series Compact & Robust Design Small Size Easy Integration Rugged Construction Impressive Detection Capabilities Detect Any Target Detect Small Changes Detect Sensor Misalignment Unmatched Ease of Use OLED Display Easily Visible Indicators Quick Head Identification NEW Compact Laser Sensor LR-X Series Standard type Separate amplifier type 3 Compact & Robust Design The small size is complimented by a durable design for use in any location 9.4 mm 0.37" 17 mm 0.67" 27 mm 1.06" Actual size Easy Integration in Any Situation Reduce Design Time on New Machines As machines become more compact and space remains at a premium, it is not always easy to design in sensors. The compact size of the LR-X Series eliminates this concern as it takes up little room and will not impact other elements of the design. Retrofitting Has Never Been Easier Finding locations to mount new sensors on an existing machine can be difficult, but this can be almost impossible with large or bulky sensors. The slim design of the LR-X Series greatly increases the number of places a sensor can be mounted and makes retrofitting a breeze. 4 Durable Metal Housing Damage due to impact is never a concern with the LR-X Series. The food-grade stainless steel housing (SUS316L) provides extraordinary resistance to impact damage from parts or operators. Stainless Steel (SUS316L) Superior Environmental Protection The LR-X Series features impressive enclosure ratings of IP65 and IP67. This ensures that dust, debris, and liquids will not cause damage to the unit, and allows these sensors to be used in virtually any environment. * Excludes amplifier used with Separate Amplifier Type. Additional Guarding Prevents Cable Damage Even cable damage can be guarded against when using the Standard Type models. The LR-X Series offers units that feature a metal guarded cable between the head and amplifier, preventing damage due to cutting, crushing, or pinching the cable. Additional Cable Guarding 5 Impressive Detection Capabilities Position-based sensing and advanced circuitry ensure detection of any target Green laser diode Custom-made CMOS chip Mirror structure Detect Targets Regardless of Appearance If the object is light If the object is dark DECREASE STRENGTH INCREASE STRENGTH The LR-X Series utilizes a custom CMOS chip to detect targets based on position. This ensures the stable detection of targets regardless of color, surface finish, or shape. Along with this, the built-in dynamic range adjusts the intensity of the laser to prevent saturation from light targets and ensure detection of dark targets. Shiny Metals 6 Rounded Surfaces Black/Dark Targets Varied Colors Angled Targets WORLD’S FIRST Green Laser CMOS Sensor When using a green laser, the returned light from an object creates a smaller and sharper spot on the CMOS chip compared to light returned from a red laser. This tighter spot leads to a higher degree of reliability and stability in the detection of any target. Detect Very Small Changes in Position The unique construction of the LR-X Series allows the unit to detect minute changes as small as 0.5 mm 0.02". This expansion in detection capabilities enables usage in applications typically requiring much larger sensors. NEW INNOVATION Integrated Impact Alarm (Gyro Monitor) Video Link Stable detection can quickly be compromised if a sensor is bumped or hit out of alignment. Luckily, the LR-X Series features the innovative gyro monitor, which can immediately alert users to impacts that could cause misalignment due to sensor rotation. 7 Ease of Use Set up and troubleshooting have never been easier or quicker Detailed OLED Display, Set Up in Minutes Never guess at what a menu or setting is trying to say again! The LR-X Series features an intuitive OLED display, which spells things out with perfect clarity. From set points to menu settings, understanding a sensor has never been easier. Conventional display LR-X Series Display The current value and set point can be understood at a glance. No manual needed to find the proper menu options. Specific actions can be selected with confidence. 8 Intuitive Display Options The benefits of the OLED display extend beyond just the settings. When paired with specific detection modes, these displays can provide a level of detail that is unmatched in other sensors and makes understanding the situation effortless. Bar display See all the elements pertinent to detection and understand quickly where the object being detected is located. Sensor Object Set Point Reference Current Surface Value Area detection mode No need to switch between screens, see the near and far thresholds that make up the detection area. Clearly Visible Indicators (Front & Back) Easily understand the output status of the unit from any location. The LR-X Series features two status indicators, one on the face of the unit and one on the back of the unit where the cable is connected. Indicator Indicator Quick Head Identification When using the Separate Amplifier Type, it is simple and easy to identify which LR-X head is attached by using the indicator blinking function. This makes setup and troubleshooting easier by ensuring focus on the right sensor head. 9 Additional Features Height Control output 1 (Presence/Absence) Control output 2 (Differentiating Orientation) 2 Independent Outputs Do more with one sensor. The LR-X Series features two independent outputs, allowing for the differentiation of up to three different conditions. 500 µs Response Time Target speed and size are no longer a concern with this blazing fast response time. Small targets and fast moving targets can now be stably detected. Do not want to detect Masked Area Amount of light received Reflected light that you don't want to detect Target Reflected light that you don’t want to detect CMOS Sensor Distance Fine Adjustment Bracket When detecting small targets proper alignment is key. The fine adjustment bracket will ensure just that with the ability to easily make precise XY adjustments. Mask Function If reflected light from near or far objects is causing detection issues, simply mask those areas and ensure only the target to be detected is seen. Display example: Response time setting screen English Chinese German Interference Prevention Function Prevent interference on up to 8 units when using the expandable separate amplifier models. This ensures stable detection with heads mounted in close proximity. 10 Multi-Language Display Options English, Japanese, Chinese, and German language options exist on all units, ensuring these sensors can be understood almost anywhere they are used. Communication Options Connecting to a Network IO-Link Communication Those using IO-Link can immediately integrate the LR-X Series into their existing setup. Both the Standard Type and Separate Amplifier (M8) Type support IO-Link communication. Connecting to a Network Industrial network • EtherNet/IP™ • Modbus/TCP • PROFINET • CC-Link V2 Cable length = 20 m (65.62') max. Network Communication Unit Separate amplifier type only By pairing the LR-X Series with a KEYENCE Network Unit, it is possible to communicate sensor settings and detection status via one of several network protocol options. Up to 16 outputs can be connected. Network communication unit NU series Simplified Connection to a Panel Reduce the total number of wires and simplify integration by using the KEYENCE Multi-Output Unit. Connect up to eight amplifiers to one unit and consolidate all the wires into a single cable. * The LR-X Series live value cannot be acquired through the network communication unit. Multi-Output Unit Separate amplifier type only Drastically reduce the number of cables and wires In the past Multi output unit Terminal block Terminal block 11 Applications 12 Presence or absence of chips in a tray Confirmation that the straw has been attached Presence or absence of black nonwoven fabric or foam Presence or absence of shiny metal workpieces Screw height check Detection of board warpage Overlap detection of papers or labels Differentiating part orientation Detection Principles Benefits of Green Laser + CMOS Chip Green lasers are able to produce a smaller and sharper spot reflection on the CMOS chip, compared to that of red lasers. These characteristics reduce the potential for detection errors and allow for a higher resolution chip to be used for more precise detection. Differences in Receiving Spots on CMOS Chips with High Resolution Typical red laser High resolution CMOS chips The spot from a red laser is typically larger in size and more prone to blurring which can lead to detection errors or less precise detection. Green laser High resolution CMOS chip The compact size and sharpness of the green laser reduces the potential for detection errors and increases precision. New Optical System To achieve the compact size and precision of the LR-X Series, it was necessary to introduce a brand new optical system setup. Mirror Structure By utilizing a mirror to redirect the reflected light, the CMOS chip can be placed in a location that helps reduce the overall body size. Custom CMOS Chip This chip provides a resolution that is 100 times greater than conventional CMOS chips, allowing for more stable detection with less returned light. This allows for a smaller light receiving lens to be implemented. Mirror structure CMOS chip Object Mirror CMOS position without mirror By implementing the mirror, the CMOS chip can be placed in an ideal location to reduce size. Custom CMOS Chip Comparison of the size of the light receiving lens required for stable detection Sensor equipped with a conventional CMOS chip LR-X series (Custom CMOS chip) Receiving lens The lens for the receiving element can be drastically reduced in size, since the high resolution CMOS chip requires less light for stable detection. 13 Selecting an LR-X Series Model STEP 1 STEP 1 STEP 2 STEP 3 Select a sensor unit Select mounting bracket(s) Select additional accessories Select a Sensor Unit Standard Models Cable Type LR-X50/ X100/ X250 M8 Connector Type (Standard Cable/ Guarded Cable) LR-X50C(G)/X100C(G)/ X250C(G) Separate Amplifier Models Sensor Head LR-XH50/XH100/XH250 Amplifier Units Cable Type (Main Unit/Expansion Unit) LR-XN11N/XN11P/ XN12N/XN12P *2 cable lengths available 2 m and 10 m 6.6' and 32.8' STEP 2 M8 Connector Type LR-XN11C Zero Line Type LR-XN10 Select Mounting Bracket(s) For Sensor Heads Standard Mounting Brackets for Sensor Head L-Type Mounting Bracket OP-88499 Rear Mounting Bracket OP-88500 Pitch-Conversion Mounting Bracket OP-88504 Adjustable Brackets for Sensor Head Adjustable Bracket A OP-88501 Adjustable Bracket B OP-88502 Adjustable Bracket Locking Post OP-88503 Fine-Tuning Mounting Bracket LR-XB1 For Amplifiers For Standard Models STEP 3 Amplifier Holder for Standard Models OP-88542 Separate Amplifier Securing Bracket (for Main Unit) OP-88245 Select Additional Accessories Wiring Separate Amplifier Models Cable for M8 Connector Type 2 m/5 m/10 m 6.6'/16.4'/32.8' OP-88505/ OP-88506/ OP-88507 14 For Separate Amplifier Models Loose Wires - M12 Adapter Connector (Male) OP-88296 Connector Set for Sensor Head Connection OP-88543 End Unit (when using expansion units) OP-26751 STEP 1 Select a Sensor Unit Select a model according to the required functionality Standard Models Cable Type M8 Connector Type Cable Type M8 Connector Type Zero Line Type 2 Control Outputs ✓ ✓ ✓ ✓ — 1 Control Output + 1 External Input ✓ ✓ ✓ ✓ — 2 Control Outputs + 1 External Input — — ✓ — — Sensor Unit IP65/IP67 IP65/IP67 IP65/IP67 IP65/IP67 IP65/IP67 Amplifier Required Functions I/O Specifications Enclosure Rating Functions Separate Amplifier Models IP65/IP67 IP65/IP67 — — — IO-Link ✓ ✓ — ✓ — Network Unit Compatibility — — ✓ (expansion unit) — ✓ Expansion — — ✓ — ✓ Interference Prevention — — ✓ — ✓ Hi-Flex Robotic Cable Specifications High-Flex Specification A (typical example) 5 million bends with no breakage Standard Models (Cable Type) High-Flex Specification A Standard Models (M8 Connector Type) High-Flex Specification A* Standard Specifications Separate Amplifier Models High-Flex Specification B High-Flex Specification A Power Supply Power Supply Sensor Amplifier High-Flex Specification B (typical example) 20 million bends with no breakage Standard Specifications Sensor Amplifier M8 Connector Cable (Listed on P.16) Relay Amplifier Amplifier Unit *Guarded cables with a model number ending in “G” are standard specifications Standard Model Lineup Type Detecting Distance Spot Size Standard Detectable Deviation NPN/PNP Output 25.0 to 50.0 mm 0.98" to 1.97" Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (Detecting Distance: 50 mm 1.97") 25.0 to 100.0 mm 0.98" to 3.94" Approx. 0.3 mm × 2 mm 0.012" × 0.08" (Detecting Distance: 100 mm 3.94") 1.0 mm 0.04" 30 to 250 mm 1.18" to 9.84" Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (Detecting Distance: 250 mm 9.84") 30 to 180 mm: 9 mm 1.18" to 7.09": 0.35" 180 to 250 mm: 18 mm 7.09" to 9.84": 0.71" M8 Connector Type Standard Cable (Power supply cable sold separately) 25.0 to 50.0 mm 0.98" to 1.97" Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (Detecting Distance: 50 mm 1.97") 0.5 mm 0.02" 25.0 to 100.0 mm 0.98" to 3.94" Approx. 0.3 mm × 2 mm 0.012" × 0.08" (Detecting Distance: 100 mm 3.94") 1.0 mm 0.04" 30 to 250 mm 1.18" to 9.84" Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (Detecting Distance: 250 mm 9.84") 30 to 180 mm: 9 mm 1.18" to 7.09": 0.35" 180 to 250 mm: 18 mm 7.09" to 9.84": 0.71" M8 Connector Type Guarded Cable (Power supply cable sold separately) 25.0 to 50.0 mm 0.98" to 1.97" Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (Detecting Distance: 50 mm 1.97") 0.5 mm 0.02" 25.0 to 100.0 mm 0.98" to 3.94" Approx. 0.3 mm × 2 mm 0.012" × 0.08" (Detecting Distance: 100 mm 3.94") 1.0 mm 0.04" Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (Detecting Distance: 250 mm 9.84") 30 to 180 mm: 9 mm 1.18" to 7.09": 0.35" 180 to 250 mm: 18 mm 7.09" to 9.84": 0.71" Cable Type 30 to 250 mm 1.18" to 9.84" 0.5 mm 0.02" Model Weight LR-X50 NPN/PNP Selectable LR-X100 Approx. 90 g LR-X250 LR-X50C NPN/PNP Selectable LR-X100C Approx. 35 g LR-X250C LR-X50CG NPN/PNP Selectable LR-X100CG Approx. 45 g LR-X250CG Separate Amplifier Model Lineup Sensor Head Type Detecting Distance Spot Size 25.0 to 50.0 mm 0.98" to 1.97" Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (Detecting Distance: 50 mm 1.97") 25.0 to 100.0 mm 0.98" to 3.94" Approx. 0.3 mm × 2 mm 0.012" × 0.08" (Detecting Distance: 100 mm 3.94") 30 to 250 mm 1.18" to 9.84" Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (Detecting Distance: 250 mm 9.84") Standard Detectable Deviation Head Cable Length Model Weight 2 m 6.6' LR-XH50 Approx. 75 g 0.5 mm 0.02" LR-XH50 (10M) Approx. 250 g 10 m 32.8' 2 m 6.6' LR-XH100 Approx. 75 g 1.0 mm 0.04" 10 m 32.8' LR-XH100 (10M) Approx. 250 g 30 to 180 mm: 9 mm 1.18" to 7.09": 0.35" 180 to 250 mm: 18 mm 7.09" to 9.84": 0.71" 2 m 6.6' 10 m 32.8' LR-XH250 Approx. 75 g LR-XH250 (10M) Approx. 250 g Amplifier Units Appearance Main Unit Expansion Unit Type Main Unit/Expansion Unit Main Unit Cable Type Expansion Unit Control Output External Input NPN/PNP Output NPN PNP 2 1 NPN PNP Model LR-XN11N LR-XN11P LR-XN12N LR-XN12P Weight Approx. 80 g Approx. 70 g M8 Connector Type Main Unit (expansion not possible) 2*1 1*1 NPN/PNP Selectable LR-XN11C Approx. 22 g Zero Line Type Expansion Unit None*2 None*2 — LR-XN10 Approx. 21 g *1 Switchable between 2 control outputs + 0 external inputs, or 1 control output + 1 external input. *2 Counted as 1 output if expanded with Multi-Output Unit FS-MC8N/MC8P or the NU Series Network Communication Unit. 15 Selecting an LR-X Series Model STEP 2 Select Mounting Bracket(s) Standard Mounting Brackets for Sensor Head Adjustable Brackets for Sensor Head Appearance Model L-Type Mounting Bracket (Includes Sensor Head Fastening Screws × 2) Material/Weight SUS316L Other Approx. 9 g OP-88499 Rear Mounting Bracket (Includes Sensor Head Fastening Screws × 2) SUS316L Other Approx. 17 g OP-88500 Pitch-Conversion Mounting Bracket (Includes Sensor Head Fastening Screws × 2) Fine-Tuning Mounting Bracket (Includes Sensor Head Fastening Screws × 2 Mounting Bracket Locking Screws × 2/Plate Nut × 1) Appearance OP-88504 SUS316L Other Approx. 9 g LR-XB1 Zinc Nickel Plating SUS304 PPS Other Approx. 30 g Model Material/Weight Adjustable Bracket A (Includes Sensor Head Fastening Screw × 2) OP-88501 SUS316L Other Approx. 15 g Adjustable Bracket B (Includes Sensor Head Fastening Screw × 2) OP-88502 SUS316L Other Approx. 20 g Adjustable Bracket Locking Post (65 mm 2.56") OP-88503 SUS316L Other Approx. 21 g OP-88501 + OP-88503 OP-88502 + OP-88503 Amplifier Mounting Bracket for Standard Models Appearance Amplifier Holder for Standard Models (Includes M3 Screws × 2) Model Material/Weight OP-88542 SUS304 Other Approx. 32 g Amplifier Mounting Bracket for Separate Amplifier Models Appearance Separate Amplifier Securing Bracket (for Main Unit) STEP 3 Model Material/Weight OP-88245 PC Approx. 2 g OP-88542 OP-88542 Front Mounted Angled Mount Select Additional Accessories M8 Connector Cables Appearance Type Material Sensor Side Cable Connector High-flex Cable: PVC, Connector: Nickel-plated brass M8 4-Pin Straight Loose wires Length (m) 2 6.6' 5 16.4' 10 32.8' Model OP-88505 OP-88506 OP-88507 Weight Approx. 80 g Approx. 190 g Approx. 370 g M12 Adapter Connector Appearance Applicable To Description Model Weight Cables with a nominal cross sectional area of 0.14 to 0.34 mm2 0.00022 to 0.00053 in2 and an outer diameter of ø3.5 to 6 mm ø0.14" to 0.24" A connector that adapts loose wires to a M12 4-pin connector (male). Useful for when connecting IO-Link compatible models to master units. OP-88296 Approx. 12 g Accessories for Separate Amplifier Model Sensor Heads (LR-XH) Required when shortening or cutting the sensor head cable Appearance (Pack of 2) Type Applicable Models Model Weight Connector Set for Sensor Head Connection LR-XH50/XH100/XH250 LR-XH50 (10M)/XH100(10M)/XH250(10M) (One is included with 10 m 32.8' cable length types.) OP-88543 Approx. 2 g Type Description Model Weight End Unit (for Expansion) Mount the amplifiers on DIN rail and then place the end units on the sides to secure them in place. Always utilize when using expansion units. (Pack of 2) OP-26751 Approx. 15 g Accessories for Separate Amplifiers Appearance 16 Standard Models (Specifications, I/O Circuit Diagrams) Specifications LR-X50 LR-X50C(G) 25.0 to 50.0 mm 0.98" to 1.97" Cable Type M8 Connector Type*1 Detecting Distance Model LR-X100 LR-X100C(G) 25.0 to 100.0 mm 0.98" to 3.94" Standard Detectable Deviation 0.5 mm 0.02" 1.0 mm 0.04" Display Resolution 0.1 mm 0.004" 0.1 mm 0.004" Approx. 0.3 mm × 2 mm 0.012" × 0.08" Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (at a detecting distance of 100 mm 3.94") (at a detecting distance of 250 mm 9.84") 500 µs/1 ms/3 ms/10 ms/200 ms Selectable Green laser (505 nm) Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*3) Specification v1.1/COM2 (38.4 kbps) Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot Response Time*2 Type Light Source Laser Class IO-Link Functions Timer Function Control Output NPN open collector/PNP open collector, N.O./N.C selectable. 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower External Input External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) I/O*4 Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection Protection Circuit 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) Power Voltage Power Consumption (Excluding Load Current) IP65/IP67 (IEC60529) Incandescent lamp: 16000 lux or less Sunlight: 16000 lux or less Enclosure Rating Operating Ambient Light Environmental Resistance 1 to 2 mm 0.04" to 0.08" Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (at a detecting distance of 50 mm 1.97") Spot Size Power Supply LR-X250 LR-X250C(G) 30 to 250 mm 1.18" to 9.84" 30 to 180 mm: 9 mm 1.18" to 7.09": 0.35" 180 to 250 mm: 18 mm 7.09" to 9.84": 0.71" Operating Ambient Temperature Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less -10°C to +50°C 14°F to + 122°F (no freezing) 35 to 85% RH (no condensation) 1000 m/s2 (100G) 6 times each for X, Y, and Z axes 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes Operating Ambient Humidity Shock Resistance Vibration Resistance Material Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC; Metal Jacket*5: SUS304 Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM Amplifier M8 Connector*6: SUS303 Weight LR-X50/X100/X250: Approx. 90 g, LR-X50C/X100C/X250C: Approx. 35 g, LR-X50CG/X100CG/X250CG: Approx. 45 g Instruction manual, laser warning label Accessories *1 Ensure the cable length is 30 m 98.4' or less for the M8 connector type. Ensure the cable length is 20 m 65.6' or less when connecting via IO-Link. *2 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. *3 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No. 56. *4 The I/O can be selected from the following combinations. Control output × 2, Control output + External input *5 LR-X50CG/X100CG/X250CG only *6 LR-X50C(G)/X100C(G)/X250C(G) only I/O Circuit Diagrams When using in PNP mode When using in NPN mode [OUT1 + OUT2 selected] [OUT1 + INPUT selected] 0V 16 to 30 VDC Load (2) White Overcurrent protection circuit (2) White (3) Blue (1) Brown 16 to 30 VDC Main circuit 0V Load (3) Blue (4) Black Load 0V Load Load Load (2) White Short circuit current 2 mA or lower Main circuit (4) Black PLC, etc. Overcurrent protection circuit Main circuit (2) White Overcurrent protection circuit Main circuit Overcurrent protection circuit (4) Black [OUT1 + INPUT selected] (1) Brown (1) Brown 16 to 30 VDC 16 to (1) Brown 30 VDC (3) Blue [OUT1 + OUT2 selected] (4) Black PLC, etc. (3) Blue 0V Short circuit current 1 mA or lower The wire colors of the M8 connector type indicate the colors when using an OP-88505/88506/88507 M8 connector cable (sold separately). Select PNP or NPN and the function of I/O pin (2) during the initial settings. Sensor pin layout 2 4 1 3 17 Separate Amplifier Models (Specifications, I/O Circuit Diagrams) Sensor Head Cable Length: 2 m 6.6' Cable Length: 10 m 32.8' Detecting Distance LR-XH50 LR-XH50 (10M) LR-XH100 LR-XH100 (10M) LR-XH250 LR-XH250 (10M) 25.0 to 50.0 mm 0.98" to 1.97" 25.0 to 100.0 mm 0.98" to 3.94" 0.5 mm 0.02" 1.0 mm 0.04" 30 to 250 mm 1.18" to 9.84" 30 to 180 mm: 9 mm, 180 to 250 mm: 18 mm 1.18" to 7.09": 0.35", 7.09" to 9.84": 0.71 Model Standard Detectable Deviation 0.1 mm 0.004" 0.1 mm 0.004" Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (at a detecting distance of 50 mm 1.97") Approx. 0.3 mm × 2 mm 0.012" × 0.08" (at a detecting distance of 100 mm 3.94") Display Resolution Spot Size 1 to 2 mm 0.04" to 0.08" Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (at a detecting distance of 250 mm 9.84") Green laser (505 nm) Type Laser Class Enclosure Rating Operating Ambient Light Environmental Operating Ambient Temperature Resistance Operating Ambient Humidity Shock Resistance Vibration Resistance Material Weight Accessories Light Source Class 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10*1) IP65/IP67 (IEC60529) Incandescent lamp: 16,000 lux or less, Sunlight: 16000 lux or less Incandescent lamp: 8000 lux or less, Sunlight: 8000 lux or less -10°C to +50°C 14°F to 122°F (no freezing) 35 to 85% RH (no condensation) 1000 m/s2 (100G); 6 times each for X, Y, and Z axes 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes Case: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable) 2 m 6.6' Cable Type: approx. 75 g, 10 m 32.8' Cable Type: approx. 250 g Laser warning label, sensor head connector (10 m 32.8' cable type only) Amplifier Unit LR-XN11N LR-XN11P NPN Output PNP Output Cable/Connector Main Unit/Expansion Unit No. of Control Outputs No. of External Inputs Response Time*5 IO-Link Functions Timer Function Model LR-XN11C (Selectable output) Cable LR-XN10 M8 connector*2 — Main Unit Expansion Unit Main Unit (expansion not possible) Expansion Unit 2 2 2*3 None*4 1 1 1*3 — 500 µs/1 ms/3 ms/10 ms/200 ms Selectable — — Specification v1.1/COM2 (38.4 kbps) — Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot Control Output Open collector, 30 VDC or lower, N.O./N.C. When used as a solitary unit: 100 mA or lower for 1 output; 100 mA or lower in total for 2 outputs; When expanding with multiple units: 50 mA or lower for 1 output Residual voltage NPN: 1.4 V or lower (output current: 10 mA or lower)/2 V or lower (output current: 10 to 100 mA), PNP: 1.6 V or lower (output current: 10 mA or lower)/2.2 V or lower (output current: 10 to 100 mA) External Input External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower Input time: 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF only when External Set is selected) I/O Unit Expansion (excluding LR-XN11C) Protection Circuit Number of Interference Prevention Devices (excluding LR-XN11C) Power Voltage Power Supply LR-XN12N LR-XN12P Up to 8 expansion units possible (including main unit, a total of 9 units connected) However, up to 16-unit expansion is possible when the LR-XN10 is used for expansion with the NU Series. Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection OFF/4 units/8 units selectable*6 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 *7 NPN output type and LR-XN10 During normal operation: 1060 mW (44 mA or lower at 24 V, 61 mA or lower at 16 V), ECO ON/ALL: 895 mW (37 mA or lower at 24 V, 50 mA or lower at 16 V) PNP output type and LR-XN11C During normal operation: 1150 mW (47 mA or lower at 24 V, 64 mA or lower at 16 V), ECO ON/ALL: 985 mW (40 mA or lower at 24 V, 53 mA or lower at 16 V) Power Consumption (excluding Load Current) −20 to +55°C -4°F to 131°F (no freezing)*8 Operating Ambient Temperature Environmental Operating Ambient Humidity Resistance Shock Resistance Vibration Resistance Case Material Weight Accessories 35 to 85% RH (no condensation) 500 m/s2 (50G); 3 times each for X, Y, and Z axes 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz; X, Y, and Z directions Main Unit and Cover: Polycarbonate Approx. 80 g Approx. 70 g Approx. 22 g Approx. 21 g Instruction manual *1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No. 56. *2 Ensure the cable length is 30 m 98.4' or less for the M8 connector type. Ensure the cable length is 20 m 65.6' or less when connecting via IO-Link. *3 Output 2 and the external input are selectable. *4 This counts as 1 output when expanding with multiple units to the FS-MC8N/MC8P and NU Series. *5 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. · The interference prevention function is not supported *6 Selecting four or eight interference prevention units causes the response time to change as follows: 4 Units selected: 6 ms/18 ms/60 ms/1.2 s selectable; 8 Units selected: 12 ms/36 ms/120 ms/2.4 s selectable. *7 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher. *8 Expansion by 1 or 2 units: −20 to +55°C -4°F to 131°F; Expansion by 3 to 10 units: -20 to +50°C -4°F to 122°F, Expansion by 11 to 16 units: -20 to +45°C -4°F to 113°F I/O Circuit Diagrams 16 to 30 VDC Black (Control output 1) 2 4 1 3 0V (4) Black 16 to 30 VDC Load (2) White Overcurrent protection circuit (2) White (3) Blue (1) Brown 16 to 30 VDC Main circuit (4) Black Load 0V Load (3) Blue Main circuit (2) White Short circuit current 2 mA or lower The wire colors indicate the colors when using an OP-88505/88506/88507 M8 connector cable (sold separately). 18 Sensor pin layout [OUT1 + INPUT selected] (1) Brown Overcurrent protection circuit PLC, etc. (4) Black Load Main circuit 0V [OUT1 + OUT2 selected] (1) Brown 16 to 30 VDC Overcurrent protection circuit (3) Blue Load Load Main circuit Overcurrent protection circuit (2) White PLC, etc. Short circuit current 2 mA or lower LR-XN11C: When using in NPN mode 16 to 30 VDC (4) Black Select PNP or NPN and the function of I/O pin (2) during the initial settings. 0V Blue [OUT1 + INPUT selected] (1) Brown Pink 0V LR-XN11C: When using in PNP mode [OUT1 + OUT2 selected] Load PLC, etc. Pink Blue Short circuit current 1 mA or lower Load White (Control output 2) 3.3 VDC Black (Control output 1) White (Control output 2) LR-XN11C 16 to 30 VDC Brown Overcurrent protection circuit LR-XN11P/ XN12P Sensor main circuit Load Load Sensor main circuit Brown Overcurrent protection circuit LR-XN11N/ XN12N PLC, etc. (3) Blue 0V Short circuit current 1 mA or lower Dimensions Unit: mm inch Standard Models Sensors 2 × M3 × P0.5 P0.02" Indicator Cable length: 300 11.81" Indicator Display ø3 ø0.12" 2" ø3 0.1 ø 2.8 0.11" Min. 8 0.31" Button 14 0.55" Button Indicator Display ø3 ø0.12" 2.8 0.11" 70.5 2.78" Button M8 connector 14 0.55" 2 × M3 × P0.5 P0.02" Indicator Cable length: 300 11.81" Indicator Button Display 15 0.59" 2.8 0.11" ø4.9 ø0.19" ø0 ø6 .2 .2 4" ø0 ø4 .1 .9 9" 27 1.06" 17 0.67" 21.1 0.83" Center of received light M8 connector Cable length: 300 11.81" 2" ø3 0.1 ø Button Center of emitted light Indicator 2.8 0.11" 19.6 0.77" 9.8 0.39" 9.4 4.8 0.37" 0.19" Min.16 0.63" 15 0.59" 27 1.06" 21.1 0.83" 2 × M3 × P0.5 P0.02" Indicator Min. 8 0.31" LR-X50CG/ X100CG/ X250CG ø4 ø0.16" 4-core brown/blue/white/black 0.2 mm2 0.00031" Cable length: 2000 78.74 17 0.67" 2.8 0.11" 9.8 0.39" 19.6 0.77" Indicator Center of received light Button 67 2.64" Button 9.4 4.8 0.37" Center of 0.19" emitted light LR-X50C/ X100C/ X250C 14 0.55" 27 1.06" 21.1 0.83" 2.8 0.11" 9.8 0.39" 19.6 0.77" Indicator Center of received light Button Button 17 0.67" 15 0.59" 9.4 4.8 0.37" Center of 0.19" emitted light LR-X50/ X100/ X250 Min. 27 1.06" 70.5 2.78" Amplifier Holder for Standard Models OP-88542 Sideways mount Holder alone 1 0.04" (R) 36 1.42" 14.5 0.57" 50.5 1.99" 17.1 0.67" 14.2 0.56" 14.2 0.56" 17.1 0.67" 14.5 0.57" Front mount With amplifier mounted Sideways mount With amplifier mounted 67 2.64" Max 23 0.91" 15.4 0.61" Max 28 1.10" Mounting surface 36 1.42" 15.4 0.61" 1 0.04" 3.3 0.13" 36 1.42" Max 23 0.91" 2 × M3 × P0.5 0.02", Female thread depth Fully threaded section 4.5 0.18" or more 2 × M3 × P0.5 0.02", Female thread depth Fully threaded section 4.5 0.18" or more 22.5 0.89" Angled mount With amplifier mounted 17.3 0.68" 16.3 0.64" Mounting surface Max 27 1.06" ø3.3 ø0.13" 20 0.79" 42.5 1.67" 67 2.64" 67 2.64" 3.3 0.13" 36 1.42" 50.5 1.99" 5.5 0.22" 3.5 0.14" Max 24.4 0.96" ø3.5 ø0.14" Max 25 0.98" 2 0.08" (R) ø3.5 ø0.14" 3.5 0.14" 2 0.08" (R) Angled mount Holder alone (R) ø3.3 ø0.13" 20 0.79" 23.4 0.92" 5.5 0.22" Front mount Holder alone 19 Dimensions Unit: mm inch Separate Amplifier Models (Sensor Heads) Sensor Heads LR-XH50/XH100/XH250 XH50 (10M)/XH100 (10M) / XH250 (10M) 2" ø3 0.1 ø 2.8 0.11" 300 11.81" 25.8 1.02" ø3.7 ø0.15" ø8.5 ø0.33" 27 1.06" 21.1 0.83" 2 × M3 × P0.5 P0.02" Indicator 2.8 0.11" Center of received light ø3 ø0.12" 17 0.67" Indicator 9.8 0.39" 19.6 0.77" 9.4 4.8 0.37" Center of 0.19" emitted light 43 1.69" 29.1 1.15" 10.2 0.40" LR-XH50/LR-XH100/LR-XH250:2000 6.6' LR-XH50(10M)/LR-XH100(10M)/LR-XH250(10M):10000 32.6' Standard Mounting Brackets for Sensor Heads R 0. 4× SUS316L t = 1.5 0.06" 08 " 17 0.67" (Detecting distance reference) 20 0.79" 14.2 0.56" 4.8 0.19" 2 × Hex socket head screws (Across flats 2 0.08") SUS (R) 7.2 0.28" 5° 2 0.08" 11.4 0.45" 17 0.67" 3° ) 2 × (R 2.8 0.11" 24 0.94" 27.5 1.08" 20 OP-88504 + LR-X/LR-XH 3.5 0.14" 16.9 0.67" 12.3 0.48" 7.5 0.30" 10 0.39" 20 0.79" 6.1 0.24" 3.5 0.14" Deformation area during adjustment Center of emitted light Center of received light 24.2 0.95" (Detecting distance reference) 24 0.94" 2 0.08" 2 × Hex socket head screws (Across flats 2 0.08") SUS 12.9 0.51" 9.8 9.5 0.39" 0.37" 2 21.1 0.83" 15 0.59" 25.4 1.00" 31.5 1.24" 0.08" × 0.13" × 2 0.08" SUS316L t = 1.5 0.06" 3.1 0.12" 3° SUS316L t = 1.2 0.05" 26.7 1.05" 2 × 3.2 ) (R 24.2 0.95" 28.5 1.12" 10.9 0.43" OP-88504 4 4 0.16" 0.16" 23 0.91" 2 × Hex socket head screws (Across flats 2 0.08") SUS 23.6 0.93" 3.6 0.14" 20 0.79" 8 2. R 1" × 0.1 R Across flats 5.5 0.22", Thickness 2.4 0.09", SUS 6.1 0.24" (R Hex socket 2 2× head screws 0.08" (Across flats 2 0.08") Iron nickel plating 2 × 3.5 0.14" 3.3° 2 Nut 27.2 1.07" (Detecting distance reference) 27 1.06" ) 2 × R0 R2.8 .11 " 26.7 1.05" 21.1 0.83" 2 × 3.2 0.13" 27 1.06" 24.2 0.95" 2 × 3.3° (R) 28 1.10" OP-88500 + LR-X/LR-XH 27.2 1.07" 2 26.5 1.04" 0.08" 20.4 0.80" OP-88500 Center of emitted light Center of received light 19.6 0.77" 2 9.8 3.7 0.39" 0.15" R 17.2 0.68" OP-88499 + LR-X/LR-XH 17 0.67" 9.8 0.39" 34.2 1.35" 10 21.1 0.83" 0.39" 2× R R0. 2.8 11" × 34.2 1.35" 3.2 0.13" 5° 2 0.08" 2 4 × 3.2 0.13" 6.3 0.25" 3.2 0.13" (R ) OP-88499 14 0.55" ) 10 0.39" (R 3 0.12" 4.9 0.19" Center of emitted light Center of received light Separate Amplifier Models (Sensor Heads) Standard Mounting Brackets for Sensor Heads LR-XB1 + LR-X/LR-XH LR-XB1 2.5 0.10" 15.1 0.59" Deformation area during adjustment 3.4 0.13" 21.1 0.83" 9.3 0.37" (9.1) (0.36") 12.2 0.48" 15.5 0.61" ø3 .2 .13 23.9 0.94" " 28.9 1.14" (9.1) (0.36") 8.3 0.33" Center of emitted light Center of received light 2 × Hex socket head screws (Across flats 2 0.08") SUS Detecting distance reference 5.6 0.22" SUS304, t = 1.5 0.06" *If not using our mounting bracket for mounting the LR-XB1, the hole diameter on the mounting side should be ø3.4 ø0.13". 15.5 0.61" 9.8 0.39" 3.1 0.12" 2 0.08" 23.9 0.94" 26.7 1.05" ø0 10.9 25.6 1.01" 0.43" 24.1 0.95" 19.6 0.77" × 21.1 0.83" 2 M3 × P0.5 P0.02" 23.9 0.94" 21.1 0.83" Hex socket head screws (Across flats 1.5 0.06") Iron nickel plating 26.7 1.05" 23.9 0.94" 21.1 0.83" 14.3 0.56" PPS 8.4 0.33" 17.2 0.68" Hex socket head screws (Across flats 1.5 0.06") Iron nickel plating 2 × R R2 0. .8 11 " 2× ø ø0 3.2* .13 " Zinc nickel plating 5.1 0.20" 1.5 0.06" 3.5 0.14" 15.5 0.61" SUS304 23.9 0.94" 11.3 0.44" 15.9 0.63" 8.9 0.35" Center of received light 11.3 0.44" 15.9 0.63" 9 9 0.35" 0.35" 0.2 0.01" Center of emitted light Center of received light ø6 ø0.24" 13.5 0.53" 11 10.8 0.43" 0.425" (Detecting distance reference) 27 1.06" 9.8 0.39" 9.8 0.39" 13.5 0.53" 5.4 0.21" Hex socket head screws (Across flats 2.5 0.10") M4, Length 14 0.55", Iron nickel plating ø6 ø0.24" 8.9 0.35" 2× ø ø0 3.2 .13 " 27 1.06" (R) 9 9 11 10.8 0.35" 0.35" 0.2 0.01" 0.43" 0.425" (Detecting distance Center of reference) emitted light Center of received light 13.5 0.53" 5.4 0.21" 2× 34.1 1.34" 31.3 1.23" 28.3 1.11" 15 0.59" " 0.11 8R R2. 34.4 1.35" 0.7 0.03" 0.1 0.004" 10.8 0.43" 8 0.31" 21.1 0.83" 2 × 3.2 0.08" × 0.13" 13.5 0.53" 13.5 0.53" 13.5 0.53" 8.9 0.35" 3.5 0.14" 2.5 0.10" Center of emitted light ø6 ø0.24" OP-88502 + OP-88503 + LR-X/LR-XH 34.4 1.35" OP-88502 + LR-X/LR-XH OP-88502 SUS316L 6.3 0.25" 5.4 0.21" 8.9 0.35" 5.4 0.21" 8.9 0.35" 2 0.08" 8.7 0.34" 4 2 0.08" 9 9 0.35" 0.35" 5 0.20" 13.5 13.7 0.53" 0.54" Center of received light 9.2 0.36" 19.6 0.77" 9.8 0.39" Center of emitted light 8 2. R 1" × 0.1 4 R .2 ø3 3" × 0.1 ø 2.5 0.10" ø6 ø0.24" 6.3 0.25" 8.5 0.33" 8.7 8.5 0.34" 0.33" (Detecting distance reference) OP-88501 + OP-88503 + LR-X/LR-XH 19.6 0.77" 9.8 0.39" 17 0.67" 11.4 0.45" 21.1 0.83" SUS316L 9.2 0.36" 13.5 13.7 0.53" 0.54" Hex socket head screws (Across flats 2.5 0.10") M4, Length 14 0.55", 9.2 0.36" Iron nickel plating OP-88501 + LR-X/LR-XH 26.7 1.05" OP-88501 5.4 0.21" 6.5 0.26" Adjustable Brackets for Sensor Heads 65 2.56" ø6 ø0.24" OP-88503 SUS316L ø0.50" 0.04" 2 × ø12.8, Thickness 0.9, SUS304 25 0.98" M6 × P1.0 P0.04" 0.39" 0.20" 2 × Across flats 10, Thickness 5, SUS304 21 Dimensions Unit: mm inch Separate Amplifier Models (Amplifier Units) Amplifier Units LR-XN11N/XN11P Main Unit (Cable Type) LR-XN12N/XN12P Expansion Unit (Cable Type) ø3.9 ø0.15" 5-core × Brown/blue: 0.34 mm 0.00053 in Black/White/Pink 0.18 mm2 0.00028 in2 Cable length: 2000 78.74" ø3.9 ø0.15" 3-core × Black/White/Pink 0.18 mm2 0.00028 in2 Cable length: 2000 78.74" (0.51") 30.7 1.21" Min. 8 0.31" 30.7 1.21" 30.5 1.20" (13.6) (0.54") 7.1 0.28" (35.5) (1.40") 30.7 1.21" (15.5) (0.61") 10.7 0.42" Maximum when cover is opened: 105.2 4.14" 10.7 0.42" 30.5 1.20" (13.6) (0.54") (35.5) (1.40") Maximum when cover is opened: 105.2 4.14" 36.6 1.44" 73.1 2.88" 15.9 0.63" LR-XN10 Expansion Unit (Zero Line Type) 7.1 0.28" 22 0.87" (13) Min. 8.6 0.34" 175° 15.9 0.63" (13.6) (0.54") 22 0.87" Min. 8 0.31" LR-XN11C Main Unit (M8 Connector Type) Min. 8.6 0.34" 30.5 1.20" (13) 36.6 1.44" 73.1 2.88" (0.51") 30.7 1.21" 30.5 1.20" 22 0.87" 15.9 0.63" Min. 8.6 0.34" 7.1 0.28" (35.5) (1.40") 175° 10.7 0.42" Maximum when cover is opened: 105.2 4.14" 10.7 0.42" 2 7.1 0.28" (13.6) (0.54") (35.5) (1.40") Maximum when cover is opened: 105.2 4.14" 2 M8 connector 36.6 1.44" 73.1 2.88" 22 0.87" 9.5 0.37" 36.6 1.44" 73.1 2.88" Min. 8.6 0.34" 15.9 0.63" 76.7 3.02" When Separate Amplifier Securing Bracket is Used (separately sold accessory OP-88245) 25.4 1.00" 10.7 0.42" Amplifier securing bracket rear 6 0.24" expansion units End unit* End unit* (22.6) (0.89") 20.8 0.82" When Mounted on a DIN Rail 35.4 1.39" 6 0.24" 53.8 2.12" 22 L 6 0.24" Total Number of Devices 1 2 3 4 5 6 7 8 9 (0.74")(38.7) (1.52") L (mm inch) 10.7 0.42" 21.4 0.84" 32.1 1.26" 42.8 1.69" 53.5 2.11" 64.2 2.53" 74.9 2.95" 85.6 3.37" 96.3 3.79" *When using expansion units, be sure to use end units. (Accessory) ø9.5 ø0.37" M8 Connector Cable OP-88505/88506/88507 2 × ø3.4 ø0.13" Spot facing ø6.4 ø0.25" Depth 3.5 0.14" 15 0.59" 31 1.22" When using 9.2 0.36" 25.4 1.00" 2 × (4.4 × 3.4) (0.17" × 0.13") Spot facing: ø7.2 ø0.28", Depth: 3.2 0.13" 15 0.59" 31 1.22" End Unit (Separately sold accessory OP-26751) 6.6 0.26" (18.7) 26.9 1.06" 2 × (4.4 × 3.4) (0.17" × 0.13") Spot facing: ø7.2 ø0.28", Depth: 3.2 0.13" Amplifier securing bracket rear 22 0.87" 10.7 0.42" 26.9 1.06" 2 × ø3.4 ø0.13" Spot facing ø6.4 ø0.25" Depth 3.5 0.14" 3.8 0.15" 22 0.87" 6.6 0.26" 3.8 0.15" (16.2) M8 Connector Type (0.64") (38.7) (1.52") Cable Type ø4.8 ø0.19" (4 × 0.22 mm2) (0.16 × 0.01 in2) 27.2 1.07" OP-88505: 2000 6.6' / OP-88506: 5000 16.4' / OP-88507: 10000 32.6' Connector pin layout (2)(1) (4)(3) No. (1) (2) (3) (4) Color Brown White Blue Black CAD DATA DOWNLOAD www.keyence.com/CADG Devices to Support Simplified Wiring Network Communication Units Type Cables and Accessories Appearance Model Type NU-EP1 *1 EtherNet/IPTM NU-PN1 *1 PROFINET NU-CL1 *1 CC-Link Model For Ver 1.10-compatible CC-Link Cable 20 m 65.6' OP-79426 For Ver 1.10-compatible CC-Link Cable 100 m 328.1' OP-79427 STP (Shielded Twisted Pair) Cable 0.2 m 0.7' OP-51504 STP (Shielded Twisted Pair) Cable 0.5 m 1.6' OP-51505 STP (Shielded Twisted Pair) Cable 1 m 3.3' OP-51506 STP (Shielded Twisted Pair) Cable 3 m 9.8' OP-51507 STP (Shielded Twisted Pair) Cable 5 m 16.4' OP-51508 STP (Shielded Twisted Pair) Cable 10 m 32.8' OP-51509 e-CON connector (pack of 2) OP-84338 *1 *1 Use a cable with a sheath outer diameter of 1.15 to 1.35 mm 0.45" to 0.05" and a wire range of 0.1 to 0.5 mm2 0.004 to 0.02 in2. If connecting a device that uses a cable with a diameter other than that detailed above, separately prepare an e-CON compatible with the wire diameter. DeviceNet™ NU-DN1 *1 EtherCAT® NU-EC1A *1 8-input eCON Input Unit NU-EN8N *2 *1 T he LR-X Series cannot provide the current value via a network communication unit. *2 N U-EN8N is used in combination with NU-EP1/CL1/DN1/EC1A. Multi-Output Units Type Main Unit External Appearance Separate Control Outputs Common Output Common Input 8 1 1 Model NPN Output PNP Output FS-MC8N FS-MC8P 23 LR Family of Sensors Detecting Distances Do-It-All Laser Sensor LR-ZB90CB 25 to 90 mm 0.98" to 3.54" LR-Z Series LR-ZB240CB 25 to 240 mm 0.98" to 9.45" LR-ZH490CB 25 to 490 mm 0.98" to 19.29" Metal workpiece presence check Detection by distance Black workpiece presence check Detecting Distances Long Range Laser Sensor LR-TB2000(C) 60 to 2000 mm 2.36" to 78.74" LR-T Series LR-TB5000(C) 60 to 5000 mm 2.36" to 196.85" Mold empty confirmation Vehicle positioning Detecting Distances All-Purpose Appearance Sensor LR-W500(C) 30 to 500 mm 1.18" to 19.69" LR-W Series LR-W70(C) 30 to 70 mm 1.18" to 2.76" LR-WF10(C) Varies based on the fiber unit Detection by appearance (color) Connector color differentiation Registration mark detection (LR-W70: 2 spot function) CALL TOLL FREE T O C O N TA C T Y O U R L O C A L O F F I C E 1-888-KEYENCE 1 - 8 8 8 - 5 3 9 - 3 6 2 3 www.keyence.com SAFETY INFORMATION Please read the instruction manual carefully in order to safely operate any KEYENCE product. CONTACT YOUR NEAREST OFFICE FOR RELEASE STATUS KEYENCE CORPORATION OF AMERICA Head Office 500 Park Boulevard, Suite 200, Itasca, IL 60143, U.S.A. AL AR AZ CA Birmingham Little Rock Phoenix San Francisco CA CA CA CA San Jose Cupertino Los Angeles Irvine CO FL GA IA Denver Tampa Atlanta Iowa IL IN KY MA Chicago Indianapolis Louisville Boston PHONE: +1-201-930-0100 FAX: +1-855-539-0123 E-mail: keyence@keyence.com MI MI MN MO Detroit Grand Rapids Minneapolis Kansas City MO NJ NY NC St. Louis Elmwood Park Rochester Charlotte NC OH OH OR Raleigh Cincinnati Cleveland Portland PA PA SC TN Philadelphia Pittsburgh Greenville Knoxville TN TX TX UT Nashville WA Seattle Austin WI Milwaukee Dallas Salt Lake City KEYENCE CANADA INC. KEYENCE MEXICO S.A. DE C.V. Head Office PHONE: +1-905-366-7655 FAX: +1-905-366-1122 E-mail: keyencecanada@keyence.com Montreal PHONE: +1-514-694-4740 FAX: +1-514-694-3206 Windsor PHONE: +1-905-366-7655 FAX: +1-905-366-1122 PHONE: +52-55-8850-0100 FAX: +52-81-8220-9097 E-mail: keyencemexico@keyence.com The information in this publication is based on KEYENCE’s internal research/evaluation at the time of release and is subject to change without notice. Company and product names mentioned in this catalog are either trademarks or registered trademarks of their respective companies. The specifications are expressed in metric units. The English units have been converted from the original metric units. Unauthorized reproduction of this catalog is strictly prohibited. Copyright © 2021 KEYENCE CORPORATION. All rights reserved. KA1-1099 LRXcatalog-KA-C-US 2081-2 611N80