HOCOVPRIO - 1 • if HOCOVPRIO = 0 (OFF), it means that it means: the "coverage-based HO" setting is off, it means, he doesn't see the RSCP or not, what he sees is EcN0, if it's enough EcN0, he is HO. • If HOCOVPRIO is on or> 0, it means that: he MUST see the RSCP, and the RSCP must be good to trigger the HO. HOCOVPRIO - 2 • U2 to U9 is set HOCOVPRIO 2. It means that to do IFHO, U2 must see the footprint of U9 to UMA, how about it, well, if the UCP in RSCP is good,
then IFHOIN will go to U9 HOCOVPRIO = 0, meaning that the "introduction" setting coverage for HO from U9 to U21 is dead, now if it dies, U9 will see U21 based on quality, now if U21 quality is good, it means that it loads the same as U21 and does not add too much traffic, meaning " NO CONGESTION "or" RESOURCE ENOUGH ". If that's the case, yes, please U9 HO to U21. • So the HOCOVPRIO is made 0 (OFF) if from U9 which is big palm to U21 to small palm. Given U21 will congest if added traffic from U21.
Therefore, U9 to U21 HOCOVPRIO = 2, so that U9 is difficult IFHO to U21 (preventing additional load on U21) - Note: traffic / load is big,
automatic shrinking is a bordernyah cell Remember RSSI is inversely proportional sa Ma EcN0, RSSI will automatically shrink EcN0.
Even though the RSCP is really good (RSSI is directly proportional to RSCP).
IDLEQOFFSET2SN - 2 • IDLEQOFFSET2SN if minus means all traffic is easy to get there. • If U9 to U2 is MINUS, it means that the traffic from U900 is dumped to U2100. Throw it easy to throw into U2100. • For example: - U900 100 = U2100 100 >>>> is that a balance right?
it's IDLEQOFFSET2SN = 0 - U900 80 = U2100 120 >>>> it's IDLEQOFFSET2SN = -2 (traffic is dumped to 2100) - U900 40 = U2100 160 >>>>
it's IDLEQOFFSET2SN = -3 (more traffic is thrown to 2100) - U900 10 = U2100 190 >>>> that's IDLEQOFFSET2SN = -5 (more traffic is dumped to 2100)
IDLEQOFFSET2SN - 3 • IDLEQOFFSET2SN if plus means that all traffic is kept at source. • For example, yak - U900 120 = U2100 80 >>>>
that's IDLEQOFFSET2SN = + 2 (keep traffic on U900) - U900 160 = U2100 40 >>>> that's IDLEQOFFSET2SN = + 3 (traffic is kept on U900) - U900 190 = U2100 10 >>>> that's IDLEQOFFSET2SN = + 5 (more traffic is kept on U900)