HOFFMAN & HOFFMAN, INC.
www.hoffman-hoffman.com
1
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VAV TERMINALS /
HOT WATER COILS
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
MAGNETIC STARTERS/AC DRIVES
Magnetic Starters......................................................................25
AC Drives............................................................................. 26-27
REGISTERS/GRILLES/DIFFUSERS/TRANSITIONS
Supply Registers........................................................................28
Return Grilles & Registers..........................................................29
Round Ceiling Diffusers..............................................................30
Volume Control Dampers...........................................................30
Steel Perforated Diffusers..........................................................31
Louver Faced Ceiling Diffusers............................................. 32-33
Tee-Bar Mounting Frame...........................................................34
Door Grilles................................................................................34
Cube Core Grilles........................................................... 34-35, 37
Economy Registers & Diffusers............................................ 35-36
Filter Grilles...............................................................................37
Spiral Grilles..............................................................................38
VAV Diffusers.............................................................................38
Slot Diffusers.............................................................................38
Square to Round Transitions......................................................39
Concentric Reducers..................................................................39
VAV TERMINALS/HOT WATER COILS
Control By Others Terminals.......................................................40
Hot Water Coils..........................................................................41
VIBRATION ISOLATION
DAMPERS/LOUVERS/ACCESS DOORS/ACTUATORS
Balancing Dampers...................................................................42
Control Dampers........................................................................43
Actuators...................................................................................44
Smoke Detectors.......................................................................44
Ceiling Radiation Dampers.........................................................45
Round Fire Dampers..................................................................46
Rectangular Fire Dampers.........................................................47
Lexington, Kentucky Direct Ship........................................... 48-49
Brick Vents................................................................................50
Stationary Louvers.....................................................................51
Parsons, Kansas Direct Ship................................................ 52-53
Access Doors.............................................................................54
Access Panels............................................................................55
FLEXIBLE DUCT/SNAPLOCK & ACCESSORIES
Low, Medium & High Pressure Duct..................................... 56-57
Stick-On Fittings........................................................................58
Snaplock & Accessories....................................................... 59-60
Clamps, Tools, Tape, Wrap.................................................... 61-62
Pipe Portals Systems.................................................................63
SPIRAL PIPE & ACCESSORIES
Spiral Pipe.................................................................................64
Spiral Fittings....................................................................... 64-70
Hanging Systems, Blast Gates.............................................. 71-72
ELECTRIC HEATERS/FILTERS & ACCESSORIES
Unit Heaters & Accessories........................................................73
Wall Heaters & Accessories........................................................73
Pleated Prefilters, Filter Rolls.....................................................74
Cartridge Filters.........................................................................74
Filter Accessories.......................................................................75
Pressure Gauges & Manometers................................................75
Side Access Filter Housings.......................................................76
VIBRATION ISOLATION
Steel Mountings.........................................................................77
Spring Hangers..........................................................................78
Elastomeric Pad.........................................................................79
STEAM SPECIALTIES
25 Series...................................................................................80
Traps & Strainers................................................................. 81-82
Terms and Conditions................................................................83
Index.........................................................................................84
VARIABLE SPEED
DRIVES & STARTERS
FANS/DAMPERS/CURBS
Centrifugal Roof Exhausters..................................................... 2-9
Sidewall Exhausters................................................................. 8-9
Roof Curbs, Equipment Rails......................................................10
Sidewall Propeller Fans & Accessories.......................................11
Ceiling & Cabinet Fans & Accessories.................................. 12-17
Gravity Ventilators......................................................................18
ASHRAE General Ventilation Design............................................18
In-Line Fans......................................................................... 19-21
Backdraft Dampers.............................................................. 22-23
Electrical Accessories................................................................24
FANS / DAMPERS /
CURBS
Table of Contents
STEAM SPECIALTIES
CENTRIFUGAL DIRECT DRIVE ROOF
EXHAUSTERS
MODEL G
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
2
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Model G direct drive exhausters are designed for roof mounted applications
exhausting relatively clean and cool air. They feature a spun aluminum
housing, a non-overloading backward inclined wheel and positive motor
cooling. Model G fans are licensed to bear the AMCA Certified Ratings Seals
for air and sound performance and are UL listed.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
CONSTRUCTION FEATURES
• Spun aluminum hood and galvanized steel frame.
• Easily removable cover for access to motor.
• Disconnect switch (standard).
• Motors located out of airstream and cooled by ambient air.
• Thermal overload protection.
• Vibration isolation for motor and wheel assembly.
• Three-speed motors standard on Model G-060 through G-095; field wired
for either 1050, 1300 or 1550 RPM.
• Wire mesh birdscreen.
DIMENSIONAL DATA
B
*C
D
100
Damper
Roof
Opening
Model
A
G-060, 070
17
193/8 121/8
3
8x8
101/2 x 101/2
G-080, 090, 095
17
213/4 145/8
4
10 x 10
121/2 x 121/2
G-099, 103, 123, 133
19
243/8 233/4
43/8
12 x 12
141/2 x 141/2
G-143
22
283/8 233/4
43/8
16 x 16
181/2 x 181/2
*May vary depending upon motor size.
ACCESSORIES
• Roof curbs – 12” high. See page 10.
• Backdraft damper, Model 100. See page 22.
• Speed controls. See page 24.
STOCK NOTES
• Units are stocked with 115/60/1 motors.
• All G units can be used with a speed control.
• Models G-060 through G-095 can be shipped UPS.
• Vari-Green® motor - 80% turndown, 85% efficient.
Available on select sizes.
B
For direct drive units, the model number designates the model
type, size and motor/fan RPM.
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
The table below lists model designation suffixes for motor horsepower
and fan RPM.
C
VIBRATION ISOLATION
G-123-B
Model is G
D
13/4"
RPM is 1140
Direct Drive
Suffix
Fan RPM
A
1725
B
1140
C
860
D
1550
G
1300
E
1050
Size is 123
STEAM SPECIALTIES
A
®
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
3
FANS / DAMPERS /
CURBS
PERFORMANCE DATA AND PRICING
MODEL G
MODEL
RPM
TS
1550
3297
E
1050
2234
G
1300
2765
D
1550
3297
E
1050
2990
G
1300
3701
D
1550
4413
E
1050
2990
G
1300
3701
D
1550
4413
E
1050
2990
G
1300
3701
D
1550
4413
G-095-VG6X 1/6 HP
1725
5052
G-099-VG4X 1/4 HP
1725
5052
G-103-B 1/6 HP
1140
3320
G-103-A 1/4 HP
1725
5024
G-103-VG4X 1/4 HP
1725
5052
G-123-B 1/6 HP
1140
3898
G-123-A 1/2 HP
1725
5899
G-123-VG5X 1/2 HP
1725
5052
G-133-B 1/6 HP
1140
3917
G-143-B 1/3 HP
1140
4365
G-143-VG7X 3/4 HP
1550
5935
G-070
1/30 HP
3 Speed
G-080
1/20 HP
3 Speed
G-090
1/15 HP
3 Speed
G-095
1/8 HP
3 Speed
BHP
Sone
BHP
Sone
BHP
Sone
BHP
100 Damper
Size
ADD
Size
ADD
$351
17
$70
8x8
$47
$351
17
$70
8x8
$47
$390
17
$70
10 x 10
$51
$390
17
$70
10 x 10
$51
$390
17
$70
10 x 10
$51
$635
17
$70
10 x 10
$51
$879
19
$75
12 x 12
$53
$627
19
$75
12 x 12
$53
$657
19
$75
12 x 12
$53
$919
19
$75
12 x 12
$53
$629
19
$75
12 x 12
$53
$709
19
$75
12 x 12
$53
$1000
19
$75
12 x 12
$53
$717
19
$75
12 x 12
$53
$941
22
$82
16 x 16
$61
$1181
22
$82
16 x 16
$61
120
3.9 .016
171
2.7 .015
274
4.7 .026
134
3.5 .017
272
5.4 .032
379
7.4 .050
292
3.6 .024
478
5.5 .041
633
7.4 .063
389
4.5 .037
640
6.5 .069
863
9.1 .111
1013
11.2 .15
1192
13.4 .24
805
5.7 .09
1374
11.7 .28
1351
11.5 .27
1213
8.4 .14
1984
17.0 .44
1984
17.0 .44
1444
9.6 .16
1905
10.4 .31
2719
17.4 .74
190
4.2 .025
175
5.4 .033
314
238
7.4 .055 7.4 .057
373
5.5 .045
557
472
338
7.4 .070 7.4 .076 7.4 .074
493
6.4 .071
745
8.2 .117
903
10.9 .16
1135
13.2 .24
702
5.1 .09
1321
11.5 .29
1298
11.2 .28
1112
8.1 .14
1928
16.8 .45
1928
16.8 .45
1340
9.2 .17
1792
10.4 .31
2644
17.2 .76
184
6.4 .049
623
8.0 .120
800
11.3 .16
1076
12.9 .25
507
4.1 .08
1274
11.3 .30
1250
10.9 .29
993
7.9 .14
1871
16.7 .46
1871
16.7 .46
1211
8.8 .17
1660
9.4 .31
2566
16.8 .77
474
.114
688
11.3 .16
1013
12.6 .25
8.0
1219
10.6 .31
1193
10.3 .29
831
7.8 .14
1810
16.7 .47
1810
16.4 .47
1031
8.5 .17
1488
10.4 .29
2487
15.0 .78
Model 5W (6 Amp) – Solid State Speed Control
$44
Damper Motor Pack MP100 120/60/1V
$89
®
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
Performance shown is for Model G without ducts.
VIBRATION ISOLATION
D
Sone
12” Curb
Price
Each
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
2765
BHP
73
1.7 .005
125
2.5 .009
166
3.9 .014
179
1.5 .008
257
3.2 .015
327
5.2 .024
249
3.6 .016
348
5.4 .027
439
7.4 .044
420
3.7 .020
565
5.4 .034
701
7.4 .055
570
4.6 .035
780
6.8 .063
969
9.4 .103
1098
11.4 .14
1250
13.5 .23
883
6.0 .08
1427
12.1 .27
1405
11.9 .26
1300
8.4 .13
2038
17.2 .42
2038
17.2 .42
1535
9.8 .16
2008
10.9 .30
2797
18.0 .73
0.625
SPIRAL PIPE
& ACCESSORIES
1300
Sone
0.500
FLEXIBLE DUCT /
SNAPLOCK & ACC.
G
BHP
90
1.7 .005
135
2.6 .009
173
3.9 .014
196
1.7 .008
268
3.4 .015
337
5.3 .024
268
3.6 .015
361
5.4 .026
450
7.4 .042
441
3.7 .019
580
5.4 .033
713
7.4 .053
605
4.6 .034
801
6.8 .061
986
9.4 .101
1114
11.4 .14
1280
13.6 .23
900
6.1 .07
1450
12.4 .27
1425
12.2 .25
1325
8.4 .12
2050
17.3 .42
2052
17.4 .40
1560
9.9 .15
2050
10.9 .30
2830
17.7 .71
0.375
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
2234
Sone
0.250
VAV TERMINALS /
HOT WATER COILS
1050
BHP
138
1.9 .004
170
2.9 .008
203
4.3 .013
253
2.5 .007
314
4.1 .013
374
5.6 .002
335
3.8 .012
415
5.4 .022
495
7.3 .038
520
3.8 .014
644
5.4 .027
768
7.5 .046
717
4.9 .029
888
7.4 .056
1059
9.6 .095
1179
11.4 .13
1307
13.6 .23
966
6.6 .07
1483
12.5 .26
1462
12.2 .25
1383
8.4 .12
2093
17.4 .40
2093
17.4 .40
1618
10.0 .15
2115
11.0 .28
2875
17.7 .71
0.125
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
E
G-060
1/60 HP
3 Speed
Sone
0.100
VARIABLE SPEED
DRIVES & STARTERS
STATIC PRESSURE IN INCHES OF W.G. / CAPACITY (CFM)
0.000
CENTRIFUGAL BELT DRIVE ROOF
EXHAUSTERS
MODEL GB
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
4
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Model GB belt drive exhausters are designed for roof mounted applications
exhausting relatively clean air. They feature a spun aluminum housing and
a non-overloading backward inclined wheel. Motors are located out of the
airstream with positive cooling by ambient air. Model GB fans are licensed
to bear the AMCA Certified Ratings Seals for air and sound performance and
are UL listed.
DIMENSIONAL DATA
D
100
Damper
Roof
Opening
243/8 233/4
43/8
12 x 12
141/2 x 141/2
19
243/8 233/4
43/8
12 x 12
141/2 x 141/2
GB-131
19
283/8 233/4
4
12 x 12
141/2 x 141/2
GB-141, 161
22
283/8 233/4
4
16 x 16
181/2 x 181/2
GB-180, 200
30
351/2
51/2
18 x 18
201/2 x 201/2
GB-240
34
423/4 311/2
51/2
24 x 24
261/2 x 261/2
GB-300
40
81/4
30 x 30
321/2 x 321/2
Model
A
B
GB-071, 081
19
GB-101, 121
50
*C
28
36
*May vary depending upon motor size.
SPIRAL PIPE
& ACCESSORIES
BB
CONSTRUCTION FEATURES
• Spun aluminum hood, aluminum wheel and galvanized steel frame.
• Easily removable cover for access to motor.
• Disconnect switch (standard).
• Vibration isolation for entire motor and drive assembly.
• Motors located out of airstream and cooled by ambient air.
• Rigid wire birdscreen.
• Thermal overload protection 1/4 HP through 3/4 HP single phase
(Greensboro stock only).
ACCESSORIES
• Roof curbs – 12” high. See page 10.
• Backdraft damper, Model 100. See page 22.
• Magnetic starters. See page 25.
STOCK NOTES
• Motors 1/4 HP, 1PH are 115/60/1.
• Motors 1/3 & 1/2 HP, 1PH are 115/208-230/60/1 and wired for 115 volts.
• Motors 3/4 HP, 1PH are 115/208-230/60/1 and wired for 208-230 volts.
• Motors 3/4 HP, 3PH and larger are 208-230/460/60 are wired for 208-230
volts.
• Motors are constant speed, open drip proof.
(Contact your salesman for other styles.)
• Units are shipped preset for maximum RPM and are adjustable.
• Units are also stocked less motor and drive for maximum flexibility.
(QD stock only.)
The table below lists model designation suffixes for motor horsepower and
fan RPM.
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
CC
DD
Belt Drive
STEAM SPECIALTIES
VIBRATION ISOLATION
212/21"/2"
AA
For direct drive units, the model number designates the model type,
size and motor/fan RPM.
EXAMPLE:
GB-081-4
Model is GB
HP is 1/4
Size is 081
Suffix
Motor HP
Suffix
Motor HP
4
1/4
10
1
3
1/3
15
1-1/2
5
1/2
20
2
7
3/4
30
3
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
5
FANS / DAMPERS /
CURBS
PERFORMANCE DATA AND PRICING
MODEL GB
MODEL
QD
QD
QD
QD
QD
QD
QD
QD
QD
Size
ADD
100
Damper
Model
ADD
Starters
STD
376
353
339
316
297
273
$75 12 x 12 $53
GB-071-4
1/4 1 1725
$685 19
11.1 0.13 11.0 0.13 11.0 0.13 10.6 0.13 10.3 0.13 10.0 0.13
864
821
793
756
719
679
$75 12 x 12 $53
$685 19
GB-081-4
1/4 1 1725
12.5 0.17 12.3 0.17 12.1 0.18 11.9 0.18 11.5 0.18 11.2 0.19
1187
1100
1052
990
909
810
$75 12 x 12 $53
GB-101-4
1/4 1 1400
$707 19
8.9 .12 8.5 .13 8.1 .14 7.8 15 7.6 16 7.4 16
1692
1625
1557
1484
1404
1315
$75 12 x 12 $53
GB-121-4
1/4 1 1395
$763 19
12.5 0.21 12.4 0.23 12.3 0.24 12.2 0.25 12.0 0.26 11.7 0.26
1866
1794
1718
1637
1545
1435
GB-131-4
1/4 1 1315
$977 19
$75 12 x 12 $53
13.2 0.22 12.8 0.23 12.5 0.24 12.1 0.25 11.7 0.26 11.2 0.26
2391
2335
2279
2219
2158
2020
$1046 19
GB-131-5
1/2 1 1685
$75 12 x 12 $53
16.9 0.47 16.6 0.48 16.3 0.50 16.0 0.51 15.7 0.52 15.4 0.53
1595
1457
1304
1085
GB-141-4
1/4 1 860
$807
7.1 0.12 7.1 0.13 6.7 0.13 6.1 0.13
2115
2008
1905
1800
1660
1488
GB-141-3
1/3 1 1140
$846 22
$82 16 x 16 $61
11.4 0.31 11.3 0.32 10.8 0.33 10.3 0.33 9.9 0.34 9.3 0.34
2523
2433
2347
2259
2166
2062
GB-141-5
1/2 1 1360
$860
14.6 0.48 14.3 0.50 13.9 0.51 13.5 0.52 13.1 0.52 12.7 0.52
3367
3094
3072
2922
2761
2587
$82 16 x 16 $61
$1233 22
GB-161-5
1/2 1 1140
15.3 0.48 14.7 0.50 14.1 0.52 13.8 0.53 13.5 0.53 13.0 0.53
2839
2667
2469
2213
1882
GB-180-4
1/4 1 730
$1078
7.4 0.26 7.1 0.15 6.5 0.17 5.8 0.17
3150
2997
2832
2624
2375
2053
$1117
GB-180-3
1/3 1 810
8.8 0.35 8.3 0.31 8.0 0.33 7.3 0.35 7.6 0.35 7.2 0.34
3655
3527
3388
3234
3052
2844
$114 18 x 18 $78
GB-180-5
1/2 1 940
$1132 30
12.7 0.55 12.4 0.47 12.1 0.49 11.3 0.52 10.4 0.54 10.0 0.55
1
4102
3989
3867
3742
3596
3432 $1211
GB-180-7
3/4
1055
3
16.2 0.77 15.7 0.67 14.9 0.68 14.4 0.72 14.0 0.74 13.5 0.76 $1239
4608
4507
4401
4290
4179
4046
$565
GB-180-10
1 3 1185
$1724
19.0 0.91 18.4 0.94 17.8 0.96 17.4 0.98 17.1 1.03 16.7 1.05
4261
4013
3744
3477
3141
2643
GB-200-5
1/2 1 770
$1496
12.1 0.52 11.0 0.53 10.7 0.55 10.2 0.55 9.8 0.55 9.3 0.52
1
4759
4548
4289
4068
3811
3504 $1597
GB-200-7
3/4
860
3
14.1 0.73 13.3 0.74 12.9 0.75 12.4 0.77 11.8 0.77 11.4 0.77 $1632
30
$114 18 x 18 $78
5340
5157
4927
4720
4520
4285
GB-200-10
1 3 965
$1778
$565
16.7 1.03 16.0 1.04 15.4 1.05 15.0 1.08 14.5 1.09 14.1 1.09
6032
5870
5682
5473
5301
5124
$1807
GB-200-15 11/2 3 1090
20 1.49 19.6 1.50 18.9 1.51 18.4 1.52 18.1 1.56 17.8 1.56
6702
6427
6158
5861
5507
5077
GB-240-10
1 3 730
$2188
15.8 0.96 15.0 1.01 14.3 1.05 13.8 1.05 13.4 1.06 13.1 1.06
7575
7331
7092
6844
6574
6261
GB-240-15 11/2 3 825
$2217 34
$130 24 x 24 $139 $565
19.7 1.39 18.6 1.44 17.7 1.49 17.2 1.51 16.8 1.52 16.4 1.54
8355
8134
7916
7700
7467
7215
GB-240-20
2 3 910
$2255
24 1.86 23 1.92 21 1.97 21 2.02 21 2.03 20 2.05
1
7694
7197
6616
5955
5095
$2589
GB-300-7
3/4
475
3
11.4 0.72 10.6 0.75 9.6 0.77 8.8 0.77 8.1 0.74
$2624
8585
8149
7640
7094
6456
5668
GB-300-10
1 3 530
$2770
13.4 1.00 12.9 1.03 12.2 1.06 11.5 1.07 10.7 1.07 10.0 1.03
9719
9334
8907
8446
7952
7388
$154 30 x 30 $176
GB-300-15 11/2 3 600
$2799 40
$565
15.9 1.45 15.4 1.49 14.9 1.52 14.3 1.54 13.8 1.55 13.2 1.55
10772
10424
10060
9648
9228
8773
GB-300-20
2 3 665
$2837
18.8 1.97 18.2 2.02 17.7 2.06 17.2 2.10 16.8 2.11 16.3 2.12
12311
12007
11704
11357
10997
10629
GB-300-30
3 3 760
$3144
23.0 2.94 22.0 3.00 21.0 3.05 21.0 3.09 21.0 3.13 20.0 3.14
QD - Orders received in Greensboro warehouse by 11:00 a.m. EASTERN TIME will normally ship within 24 hours. Call TOLL-FREE: 1-800-334-0254.
W/DIS
$164
$164
$164
$164
$164
$164
$164
$164
$164
$164
$784
$164
$784
2
$164
$784
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
$784
VIBRATION ISOLATION
QD
12” Roof Curb
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
QD
Price
Each
SPIRAL PIPE
& ACCESSORIES
QD
0.625
Sone BHP
FLEXIBLE DUCT /
SNAPLOCK & ACC.
QD
0.500
Sone BHP
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
QD
RPM
0.375
Sone BHP
VAV TERMINALS /
HOT WATER COILS
QD
PH
0.250
Sone BHP
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
QD
HP
0.125
Sone BHP
VARIABLE SPEED
DRIVES & STARTERS
STATIC PRESSURE IN INCHES OF W.G. / CAPACITY (CFM)
0.000
Sone BHP
BELT DRIVEN CENTRIFUGAL UPBLAST ROOF
EXHAUSTERS
MODEL CUBE
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
6
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Model CUBE exhausters are designed for roof-mounted restaurant and
commercial applications, exhausting dirty or grease laden air up and away
from the roof line. All fans are UL 762 listed for restaurant applications
and for operation with air temperatures up to 300°F. Model CUBE fans
are licensed to bear the AMCA Certified Ratings Seals for air and sound
performance and are UL listed.
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
CONSTRUCTION FEATURES
UL 762 Listed for Restaurant Applications
• Spun aluminum hood, aluminum wheel and galvanized steel frame.
• Easily removable cover for access to motor.
• Disconnect switch (standard).
• Vibration isolation for entire motor and drive assembly.
• Thermal overload protection 1/4 HP through 3/4 HP single phase.
• Motors located out of airstream and cooled by ambient air.
DIMENSIONAL DATA
100
Damper
Roof
Opening
247/8 281/4 173/8
12 x 12
141/2 x 141/2
22
287/8 293/4 193/8
16 x 16
181/2 x 181/2
CUBE-161
22
287/8 293/4 193/8
16 x 16
181/2 x 181/2
CUBE-180
30
353/8 285/8
21
18 x 18
201/2 x 201/2
CUBE-200
30
353/8 285/8
21
18 x 18
201/2 x 201/2
CUBE-240
34
423/4 337/8 251/2
24 x 24
261/2 x 261/2
CUBE-300
40
30 x 30
321/2 x 321/2
Model
A
CUBE-101-121
19
CUBE-141
B
50
C
36
D
29
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
B
B
STOCK NOTES
• Motors 1/4 HP, 1PH are 115/60/1.
• Motors 1/3 & 1/2 HP, 1PH are 115/208-230/60/1 and wired for 115 volts.
• Motors 3/4 HP, 1PH are 115/208-230/60/1 and are wired for 208-230
volts.
• Motors 3/4 HP, 3PH and larger are 208-230/460/60 are wired for 208230 volts.
• Motors are constant speed, open drip proof.
(Contact your salesman for other styles.)
• Units are stocked less motor and drive for maximum flexibility.
(QD Stock Only)
• Vari-Green® motor - 80% turndown, 85% efficient.
Available on select sizes.
C
D
VIBRATION ISOLATION
ACCESSORIES
• Prefab roof curbs - 12” high. See page 10.
• Birdscreen kit.
• Magnetic starters. See page 25.
• Grease trap kit - attaches to drain trough to collect grease.
• Backdraft damper, Model 100. (Not for use in grease applications)
See page 22.
• Available from factory with coated wheels for heavy cooking applications.
D
C
STEAM SPECIALTIES
133/44""
133/44""
A
A
®
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
7
FANS / DAMPERS /
CURBS
PERFORMANCE DATA AND PRICING
MODEL CUBE
HP
PH
QD
QD
QD
QD
QD
QD
QD
QD
QD
QD
QD
QD
QD
QD
QD
QD
QD
1313
11.19 0.23
1528
12.2 0.23
1699
14.0 0.30
1923
16.7 0.41
1793
10.6 0.25
2006
11.7 0.32
2362
14.2 0.48
2757
18.5 0.72
2941
14.2 0.53
3129
15.4 0.61
3425
17.7 0.77
2448
8.1 0.26
2759
10.0 0.34
3243
13.1 0.49
3786
15.8 0.73
4224
17.1 0.96
3096
8.1 0.35
3718
10.9 0.52
4439
15.2 0.78
4958
17.7 1.03
5798
23.0 1.53
6451
23 2.03
4540
9.5 0.51
5461
12.8 0.76
6133
15.5 0.99
7184
18.6 1.49
7985
23.0 1.98
7772
12.2 1.00
9127
15.7 1.46
10193
18.6 1.92
11904
23 2.86
1251
11.5 0.24
1463
12.5 0.24
1639
14.5 0.31
1869
17.3 0.43
1667
10.3 0.26
1896
11.6 0.33
2271
13.2 0.50
2683
19.5 0.74
2796
13.8 0.53
2994
15.0 0.62
3301
17.2 0.78
2143
7.4 0.26
2525
9.5 0.35
3115
12.9 0.52
3666
15.7 0.75
4108
16.8 0.99
2699
7.5 0.35
3413
10.1 0.52
4192
14.7 0.79
4742
17.0 1.04
5610
22.0 1.55
6279
23 2.05
4093
8.8 0.52
5052
12.2 0.78
5764
15.1 1.01
6947
18.2 1.51
7798
22.0 2.00
7245
11.7 1.03
8705
15.2 1.51
9808
18.0 1.97
11607
22 2.94
1189
11.1 0.25
1398
12.6 0.25
1580
14.7 0.32
1816
17.9 0.44
1515
10.0 0.26
1773
11.2 0.34
2174
12.9 0.51
2602
16.1 0.75
2641
13.5 0.54
2848
14.7 0.62
3172
16.8 0.79
1763
7.1 0.25
2257
9.0 0.34
2879
12.4 0.52
3554
15.5 0.78
4005
16.5 1.01
2073
7.0 0.33
3048
9.4 0.51
3922
13.5 0.79
4508
16.4 1.04
5421
21.0 1.57
6108
22 2.07
3565
8.4 0.51
4659
11.5 0.79
5409
14.6 1.03
6615
17.6 1.54
7536
22.0 2.03
6636
12.2 1.05
8226
14.8 1.54
9411
17.5 2.02
11273
22 3.00
1125
10.7 0.26
1315
12.7 0.26
1518
14.8 0.33
1763
18.2 0.45
1318
9.9 0.26
1628
11.0 0.34
2068
12.5 0.51
2517
14.2 0.76
2475
13.1 0.53
2697
14.3 0.63
3035
16.5 0.79
Damper Motor Pack MP 100/120/60/1V
QD
*100
Damper
Size
ADD
Starters
ADD
Size
ADD
STD
$37
19
$75 12 x 12 $53
$164
$37
19
$75 12 x 12 $53
$164
$41
22
$82 16 x 16 $61
$164
$41
22
$82 16 x 16 $61
$1289
$1338
$1357
$1155
$1196
$1200
$1284
$1550
$1650
$1686
$164
$565
$784
$1638
1867
8.5 0.32
2654
12.0 0.52
3345
15.1 0.78
3903
16.3 1.04
$1687
$1706
$164
$71
30
$114 18 x 18 $78
$1807
$1843
$565
$1989
$784
$1860
2518
9.0 0.50
3626
12.9 0.79
4254
15.6 1.04
5217
21.0 1.57
5932
22 2.09
$164
$1879
$1980
$2015
$2161
$71
30
$114 18 x 18 $78
$565
$2190
$2427
4202
11.0 0.78
5037
13.9 1.04
6304
17.0 1.56
7233
21.0 2.06
5879
10.2 1.04
7708
14.3 1.56
8968
17.1 2.05
10939
21 3.06
$784
$2228
$164
$2528
$2563
$2709
N/A
34
$2738
$130 24 x 24 $139
$565
$784
$154 30 x 30 $176 $565
$784
$2776
$3311
$3340
$3378
N/A
40
$3684
$147
$89
- Orders received in Greensboro warehouse by 11:00 a.m. EASTERN TIME will normally ship within 24 hours. Call TOLL-FREE: 1-800-334-0254.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
W/DIS
STEAM SPECIALTIES
*Damper not for use in kitchen applications.
$979
Bird
12” Roof Curb
Screen
VIBRATION ISOLATION
QD
1364
12.2 0.22
1595
11.6 0.22
1760
13.4 0.29
1979
16.1 0.40
1905
10.8 0.24
2106
12.2 0.31
2445
14.7 0.47
2826
19.0 0.70
3072
14.6 0.51
3250
15.9 0.59
3532
18.1 0.74
2616
8.6 0.24
2915
10.4 0.32
3388
13.5 0.47
3919
16.2 0.70
4348
17.9 0.93
4321
8.83 0.34
3993
11.7 0.51
4676
16.3 0.77
5175
18.4 1.01
5991
23.0 1.51
6628
24 2.00
4960
10.5 0.49
5762
13.4 0.74
6370
15.9 0.97
7399
19.0 1.46
8194
23.0 1.93
8231
12.7 0.95
9500
16.4 1.40
10508
19.7 1.85
12176
24 2.78
Price
Each
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
QD
0.625
Sone BHP
SPIRAL PIPE
& ACCESSORIES
QD
0.500
Sone BHP
FLEXIBLE DUCT /
SNAPLOCK & ACC.
QD
0.375
Sone BHP
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
QD
0.250
Sone BHP
VAV TERMINALS /
HOT WATER COILS
QD
1660
0.125
Sone BHP
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
QD
0.000
Sone BHP
1413
12.6 0.21
1665
CUBE-121-4 1/4 1 1410
11.1 0.21
1824
CUBE-121-3 1/3 1 1545
12.8 0.28
2037
CUBE-121-5 1/2 1 1725
15.6 0.39
2001
CUBE-141-4 1/4 1 1105
10.9 0.23
2192
CUBE-141-3 1/3 1 1210
12.2 0.30
2518
CUBE-141-5 1/2 1 1390
14.9 0.45
2889
CUBE-141-7 3/4 1 1595
20.0 0.69
3191
CUBE-161-5 1/2 1 1110
15.0 0.47
3363
1 1170
16.3 0.55
CUBE-161-7 3/4
3636
3 1265
18.5 0.70
2815
CUBE-180-4 1/4 1 745
9.2 0.22
3098
CUBE-180-3 1/3 1 820
11.2 0.30
3551
CUBE-180-5 1/2 1 940
13.8 0.45
1
4061
CUBE-180-7 3/4
1075
3
16.5 0.67
4477
CUBE-180-10 1 3 1185
18.5 0.90
3740
CUBE-200-3 1/3 1 665
9.4 0.33
4275
CUBE-200-5 1/2 1 760
12.1 0.49
1
4922
CUBE-200-7 3/4
875
3
16.3 0.75
5400
CUBE-200-10 1 3 960
18.7 0.98
6187
CUBE-200-15 11/2 3 1100
23.0 1.48
6806
CUBE-200-20 2 3 1210
25 1.97
5303
CUBE-240-5 1/2 1 585
11.5 0.46
1
6074
CUBE-240-7 3/4
670
3
14.3 0.69
6663
CUBE-240-10 1 3 735
16.6 0.92
7660
CUBE-240-15 11/2 3 845
19.6 1.39
8431
CUBE-240-20 2 3 930
24.0 1.86
8625
CUBE-300-10 1 3 530
13.3 0.90
9845
CUBE-300-15 11/2 3 605
17.0 1.34
10822
CUBE-300-20 2 3 665
20.0 1.77
12449
CUBE-300-30 3 3 765
24 2.70
Grease Containers – Model 475538
CUBE-101-4 1/4 1
QD
RPM
VARIABLE SPEED
DRIVES & STARTERS
STATIC PRESSURE IN INCHES OF W.G. / CAPACITY (CFM)
MODEL
8
FANS / DAMPERS /
CURBS
DIRECT DRIVE CENTRIFUGAL EXHAUST FANS
xe BWC dna WC sledoM
ehw snoitacilppa detnuom
i ot lacitcarpmi ro yltsoc oot
ula na ,gnisuoh munimula
rotom evitisop dna leehw
sni fo esae rof dedivorp si
A eht raeb ot desnecil era
a ecnamrofrep dnuos dna
Models CW and CWB exhausters are designed for sidewall
mounted applications where roof mounted exhausters may be
too costly or impractical to install. These models feature a spun
aluminum housing, an aluminum, non-overloading centrifugal
wheel and positive motor
cooling.
remo
vable
ringroof or wall
Model CUE
is a A
direct
drive
fanmounting
designed for
is provided for easemounting
of installation.
Model
CWairand
CWB fans
where the
exhaust
is directed
away from the
are licensed to bearmounting
the AMCA
Cer
tified
Ratings
Seals
f
or
surface. Constructed of a single piece,air
countinuously
and sound performance and are UL listed.
wedled housing, this fan is used for exhausting contaminated
or grease laden air.
VARIABLE SPEED
DRIVES & STARTERS
MODEL CUE
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
AEF NOITCURTSNOC
CONSTRUCTION FEATURES
•
•
•
ot detnuom neercsdriB
r gnitnuom elbavomeR
,dooh munimula nupS
emarf leets dezinavlag
evoc elbavomer ylisaE
DIMENSIONAL
DATA
ats( hctiws tcenno
csiD
rof noitalosi noitarbiV Model
A
torp daolrevo lamrehT
17
fo tuo detacol srotoM CUE-070
uorht 060-WC sledoM
CUE-080, 090
19
dlefi ,srotom deeps-3
19
.MPR 0551 CUE-095
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
•
•
•
•
•
•
•
•
•
B
C
183/8 131/2
21
133/8
10 x 10
21
15 /4
10 x 10
1
19
247/8 281/4
12 x 12
CUE-141
22
28 /8 29 /4
16 x 16
FLEXIBLE DUCT /
SNAPLOCK & ACC.
p eeS .slortnoc deepS
oM ,repmad tfardkcaB
eeS .ellirg llaw roiretnI
•
•
•
7
3
SETON KCOTS
WC ledoM
1/06/511 era srotoM
c stinu WC dekcots llA
airav rof lortnoc deeps
BBC
Damper Size
STOCK NOTES
Model CW
Motors are 115/60/1
• Model CUE
All stocked CW •units
can070-095
be usedare
with
Model
5W
Models
UL 705
listed.
speed control for variable performance requirements.
• Models 101-141 are UL 762 listed.
Models CW-060•through
CW
-121 can be shipped
Motors are
115/60/1
by UPS.
• Models CUE-070 through CUE-095 can be shipped by
UPS.
Model CWB
Motors – 1/4 HP•are
115/60/1 motor - 80% turndown, 85% efficient.
Vari-Green®
1/2 & 3/4 HP are 115/208-230/60/1
Available on select sizes.
(wired for 115 volts)
•
•
AB
A
Model CWB is UL 762 listed for restaurant applications
and for Coperation with air temperatures up to 300F .
®
D
133/44""
*
C
5"
•
eziS repmaD
Wa ll Opening
•
gninepO ll aW
Damper Frame Size
1
B
•
ACCESSORIES
eziS emarF repmaD
•
Mounting Hole Bolt Circle
• Prefab roof curbs – 12” high. See page 10.
• Magnetic starters. See page 25.
18 /2 x 18 /2
page
30.
Grease
trap
kit – attaches to drain trough to collect grease.
• Speed controls.•See
Model WD-323.
Seeforpage
• ,Backdraft
damper. (Not
use in28.
grease applications)
• Backdraft damper
Inter
ior
w
all
gr
ille
.
See
page
13.
See
page
22-23.
•
• Speed controls. See page 24.
1
elcriC tloB eloH gnitnuoM
BWC ledoM
1 era PH 4/1 – srotoM
a PH 4/3 & 2/1
11 rof deriw(
SPIRAL PIPE
& ACCESSORIES
141/2 x 141/2
STOCK NOTES
A
•
267 LU si BWC ledoM
C
htiw noitarepo rof dna
•
•
•
•
•
•
•
uorht 060-WC sledoM
.SPU yb
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
8x8
CUE-101, 121
SEIROSSECCA
VIBRATION ISOLATION
Damper
Birdscreen mounted
to the discharge
perimeter.
CONSTRUCTION
FEATURES
Removable mounting
for ease
installation.
• Spunring
aluminum
hoodofand
galvanized steel frame.
Spun aluminum•hood,
aluminum
wheel
and
Easily removable cover for access to motor.
galvanized steel•frame
.
Disconnect
switch (standard).
Easily removable
co
v
er
forisolation
accessfor
to entire
motormotor
.
• Vibration
and drive assembly.
Disconnect switch
(standard).
• Thermal
overload protection.
Opening Vibration isolation
for entire
motor
drive assemb
ly. by ambient air.
• Motors
located
out and
of airstream
and cooled
Ther
mal
ov
er
load
protection
(model
CW).
• Models CUE-070 through CUE-095 are equipped with
101/2 x 101/2
Motors located out3-speed
of airstream
ambient
. or 1550
motors,and
fieldcooled
wired forbyeither
1050,air
1300
121/2 x 121/2 Models CW-060 through
RPM. CW-095 are equipped with
3-speed motors, field wired for either 1050, 1300 or
121/2 x 121/2 1550 RPM.
ACCESSORIES
* "5
STEAM SPECIALTIES
*Note: 2 inches
.deminimum.
riuqer si re5pinches
mad dewhen
zirotommotor
nehwized
sehdamper
cni 5 .muismrequired.
inim sehcni 2 :etoN*
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
9
FANS / DAMPERS /
CURBS
PERFORMANCE DATA AND PRICING
MODEL CUE
0.000
MODEL
1300
D
1550
E
1050
G
1300
D
1550
E
1050
G
1300
D
1550
E
1050
G
1300
D
1550
.007
309
4.1
.013
369
5.6
.023
325
3.8
.012
403
5.4
.022
480
7.3
.037
549
3.8
.019
680
5.4
.035
811
7.5
.060
711
4.9
.032
880
7.4
.061
1049
9.6
.103
1167
.14
Sone
193
BHP
Sone
BHP
Sone
BHP
Sone
BHP
0.625
Sone
Price
Each
Wall
Bracket
BHP
Roof Curb
330
WALL DAMPER
100
ROOF DAMPER
Size
ADD
Size
ADD
Size
ADD
8x8
$62
8x8
$47
171
1.7 .008 1.5 .008
267
255
152
3.4 .015 3.2 .015 2.7 .013
334
325
269
$392
$47
17
$70
$456
$48
19
$75 10 x 10 $68 10 x 10
$51
$456
$48
19
$75 10 x 10 $68 10 x 10
$51
$467
$48
19
$75 10 x 10 $68 10 x 10
$51
$736
$48
19
$75 10 x 10 $68 10 x 10
$51
$1102
$48
19
$75 12 x 12 $73 12 x 12
$53
$1175
$48
19
$75 12 x 12 $73 12 x 12
$53
$1402
$52
22
$82 16 x 16 $86 16 x 16
$61
160
.53 .025 5.2 .025 4.7 .026 4.2 .021
265
247
133
3.6 .014 3.6 .015 3.5 .016
355
343
272
173
5.4 .025 5.4 .026 5.4 .031 5.4 .031
441
431
376
314
235
7.4 .041 7.4 .042 7.4 .047 7.4 .053 7.4 .054
470
451
306
3.7 .023 3.7 .024 3.6 .027
616
600
517
391
5.4 .041 5.4 .042 5.5 .048 5.5 .052
757
744
677
604
501
347
7.4 .066 7.4 .068 7.4 .076 7.4 .083 7.4 .088 7.4 .084
603
570
381
4.6 .036 4.6 .037 4.5 .037
797
774
641
484
199
6.9 .066 6.8 .067 6.5 .072 6.4 .071 6.4 .054
983
964
861
747
616
442
9.4 .109 9.4 .111 9.1 .117 8.2 .121 8.0 .121 8.0 .106
1108
1093
1005
11.1 .15 11.0 .15 10.5 .16
1440
.17
.17
9.6
.17
15.8 .39 16.1 .40 16.7 .41 17.3 .43 17.9 .44 18.2 .45
2888
CUE-141-VG7G
1550
3/4 HP
18.7 .63
18.2 .63 17.8 .64 17.5 .66 17.7 .68 14.9 .69
2765
2743
2671
1869
2594
1255
1816
1763
2509
Model 5W (6 Amp) Solid State Speed Controller (070-095)
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
2037
CUE-121-VG5G
1725
1/2 HP
15.6 .39
1923
1315
9.8
680
13.0 .25 12.9 .26 11.5 .27 12.0 .28 11.7 .29
1979
1373
9.9
802
1468
CUE-101-VG4G
1725
1/4 HP
13.3 .24
2000
1422
905
SPIRAL PIPE
& ACCESSORIES
CUE-095-VG6X
1725
1/6 HP
11.3
BHP
0.500
FLEXIBLE DUCT /
SNAPLOCK & ACC.
CUE-095
1/8 HP
G
250
2.5
Sone
0.375
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
CUE-090
1/15 HP
1050
BHP
0.250
VAV TERMINALS /
HOT WATER COILS
CUE-080
1/20 HP
E
Sone
0.125
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
CUE-070
1/30 HP
RPM
0.100
VARIABLE SPEED
DRIVES & STARTERS
STATIC PRESSURE IN INCHES OF W.G. / CAPACITY (CFM)
$44
Performance shown is for Model CUE without ducts.
Damper not for use in kitchen applications.
VIBRATION ISOLATION
STEAM SPECIALTIES
®
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
10
The equipment rail construction is all welded unitized, 18 gauge galvanized
steel shell and base, wood nailer, and flashing cap of 20 gauge galvanized
5”
steel.
Length Price Each* Freight
12”
’
r6
CURBS, RAILS AND ADAPTERS
3’
3'
$88
Included
4'
$112
Included
*6'
Add Frt.
$146
Curbs are 12” high and are constructed of 18 gauge galvanized steel with
welded seams. They have 1-1/2” thick, 3lb density rigid fiberglass insulation,
Curbs are 12" high and are constructed of 18 gauge galvanized steel
2” flashing strip and factory installed treated wood nailer strip.
with welded seams. They have 1-1/2" thick, 3lb density rigid fiberglass
Curb
Maximum
insulation,
2"A flashing strip
and factory
installed
treatedPrice
wood nailer strip.
B
C
Model
Load (lbs)
Each
12
12
12
15Model
131/2A
131/B
2
12C
Maximum
1000(lbs)
Load
17 12
151/12
2
15112
/2
1212
1000
1000
$70
19
171/2 1
171/21
12
1000
$75
201/2
201/2
12
1200
$82
221/2
12
1200
$90
241/2
12
1200
$98
28 /2
12
1330
$114
321/2
12
1470
$130
38 /2
12
1600
$154
Curb
15
VAV TERMINALS /
HOT WATER COILS
*30
*34
*40
17 /
241/2
22
17 /
24
22 /
321/2
26
22 /
1200
12
1/2
24
1
38 /2
1000
12
1 2
1/2
24
1
1000
12
1/2
20
1
1 2
1000
12
1 2
1/2
20
1
28 /2
12
151/2
1 2
1000
1200
12
1200
Included
$66
Included
$66
Included
$75
Included
$80
Included
$86
Included
28 /
12
1730
$178
$98
Included
321/2
501/2
321/2
501/2
12
12
1470
1870
$108
$202
Add Frt.
*58*40
1 2
1
/2 /
5638
1
561/2 2
38 /
1212
1600
2000
$128
$227
Add Frt.
*46
441/2
44/2
12
1730
$129
Add Frt.
*52
50 /
1 2
50 /
12
1870
$147
Add Frt.
*58
561/2
561/2
12
2000
$165
Add Frt.
30
441/2
28 /
1 2
12
1330
EQUIPMENT RAILS 12" TALL –
NO CANT SURFACE
MOUNT
The equipment
rail STYLE
construction is all welded unitized, 18 gauge galvanized
The equipment rail construction is all welded unitized, 18 gauge galvanized steel shell and base, wood
and base
nailer, and flashingsteel
cap of 20shell
gauge galvanized
steel. , wood nailer, and flashing
5”
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
$61
Included
*34
*52
2’,
66’
’ or
’44’,
cap of 20 gauge galvanized
Length
Price Each
2’
$67
Length
12”
3’3,
Price Each*
Freight
$100 $88
Included
4’
$133
*6’
$200
$112
Included
$146
Add Frt.
3'3’
4'
VIBRATION ISOLATION
$65
1 2
441/2
steel.
STEAM SPECIALTIES
$61
Price
1 2
*46
*Curb sizes 30 thru 58 must ship Motor Freight.
221/2
12
13 /2
151/2
19
26
/
13 /2
17
24
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
o
STRAIGHT ROOF CURBS
22
FLEXIBLE DUCT /
SNAPLOCK & ACC.
4’
*6'
*Must ship Motor Freight.
Curbs are 12" high and are constructed of 18 gauge galvanized steel
CURB ADAPTERS
with welded seams. They have 1-1/2"
thick, 3lb density
rigid fiberglass
Price
Model
A
B
C
insulation, 2" flashing strip and factory installed treated
Each wood nailer strip
850616
17
19
Curb
Model
A
850618
B
19
C
22
12
12
823055
12
22
12
26
15
131/2
131/2
17
151/2
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and 1added to invoice.
19
17 /2
7
$129
Maximum
Price
Load7(lbs) $140Each
Freight
7
1000
$162 $59
Included
12
1000
$61
Included
151/2
12
1000
$66
Included
171/2
12
1000
$66
Included
22
201/2
201/2
12
1200
$75
Included
24
221/2
221/2
12
1200
$80
Included
11
FANS / DAMPERS /
CURBS
DIRECT DRIVE SIDEWALL PROPELLER FANS
MODEL SE1
MODEL SE1
labeled
• Direct drive
sidewall design.
• constant
Neoprene
motor
mounts
• Motor is
speed,drive
totally sidewall
enclosed,
U.L.
labeled.
design
• Direct
• Designed
for relatively clean air and low pressure
• Motor
• Neopreneapplications
motor
mounts.is constant speed, totally enclosed, U.L.
labeled
VARIABLE SPEED
DRIVES & STARTERS
• Direct drive sidewall design
MODEL
SE1 is constant speed, totally enclosed, U.L.
• Motor
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Sizes
SE1-8
include
motor side guard
• Designed
for• relatively
cleanthru
air
andSE1-12
low
pressure
applications.
Neoprene
motor
mounts
Designed
for relatively
clean air and low pressure
• Sizes SE1-8 •thru
SE1-12 include
motor side guard.
Performance Data and Prices
applications
• Sizes SE1-8 thru SE1-12 include motor side guard
Price
and
Prices
Performance Data
RPM
0.00
0.100
0.125
STATIC PRESSURE/CFM
PERFORMANCE
Model DATA AND PRICES
HP
ModelSE1-8-D HP
/25
SE1-8-440-D
SE1-10-D Model
1
SE1-10-440-D
/12
SE1-12-DSE1-8-D
1
/8
SE1-12-432-D
SE1-10-D
SE1-14-B6
1
SE1-14-440-B
/6
1
1550
0.000
1550
1 12
/
1550
1 8
/
1550
459
HP1550
924
1 25
/ 1550
1449
1 12
/ 1160
1604
0.250
Each
Size
Add
Add
320 DAMPER
WALL HOUSIING
Price
459
351
307
167
$199
10ADD
x 10
$45 ADD Wall
$106Mount
Each
0.100
0.125
0.250
Size
Static Pressure/CFM
Price
WD-320 Damper
Collar
351
307
167
$301
10 x 10
$198
$76
$47Add
$106
RPM 924 0.00 800 0.100 763 0.125
0.250 $205Each 12 x 12
Size
Add
$82
800
763
624
$310
12 x 12
$198
14x 10 $52$45
$109
15501449 459 1309 351 1271 307 1042 167 $227$199 14 x10
$106
1309
1271
1042
$343
14 x 14
$201
$89
15501604 924 1406 800 1350 763 908
$106
x12
16x 12 $56$47
1406
1350
908
$590
16$371
x 16$205 16$102
$204 $111
Add
Std. Side
Motor
Guard
Std.
Add
/ 2235
15502058
1449 2012 1309 1710 1271 $607 1042 18$389
x 18$227
14 x 14
$108
$52
$215
$109
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
1 25
RPM
/
Wall Mount Motor Side
Collar
Guard
WD-320 Damper
VAV TERMINALS /
HOT WATER COILS
Static Pressure/CFM
/ 3238
11602987
x 20$371
1604 2908 1406 2434 1350 $682 908 20$451
$134
16 x 16
$225
$56
$111
$98
/3
1160
3974
3621
$784
22 x 22
$163 x 18
SE1-20-428-B
1 64227
/ 1160 11604030
SE1-16-B6
1 3
SE1-20-B3
/
4227 22354030 2058 3974 2012 3621 1710 $499$389 22 x18
22
Performance ratings are AMCA certified
1 4
/
1160
SE1-18-B4
3238
2987
2908
2434
$451
20 x 20
For additional
performance
data, see Greenheck
Catalog
SB/S-1
ratings
are AMCA
certified
Performance
$234
$62
$113
$103
$69
$115
$77
$117
1 6
/
1160
1 6
1
SE1-12-D
/6
1160
SE1-16-426-B
SE1-16-B6
/
1 8
SE1-18-429-B
/4
1160
1 4
SE1-14-B6
/
SE1-18-B4
1 6
1
1
performance 1data,
see
Greenheck
For additional
/3
1160
SE1-20-B3
4227 Catalog
4030SB/S-1
3974
•
•
$499
3621
22 x 22
Std.
$98
Std.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
•
•
Std.
Std.
$109
$118
Size 8-12
Performance
ratings are AMCA certified
For additional performance data, see Greenheck Catalog SB/S-1
DIMENSIONAL DATA
Data
Dimensional
Model
A
B
C
Model
C
7 B Data
13 /A
5
SE1-8-440-D
Dimensional
E
1
D
A Sq.
A sq.
B
Size
14-20
A Sq.
A sq.
D
B
B
C
D
Size 14-20
C
B
D
E 10 x 10 Damper
10 x 10
Damper
12 x 12
10 x 10
14 x 14
12 x 12
1 1
/8 /8
83/4 7
5
1
SE1-10-440-D
1513
5
SE1-8-D
Model
A
B
C
SE1-12-432-D
181/8 1
103/48 3/4 81/4
1
7
5
SE1-10-D
15 /8
SE1-8-D 1
131/8 1
7 1
5
11 /4
8 /2
1
SE1-14-440-B
20 /8
SE1-12-D
181/8 1 103/4 3
8 1/4
1
3
7
8
/
4
SE1-10-D22 /8 15 11
/8 /4
78 /8
51
SE1-16-426-B
1/8
11 1/4 3 7 8 1/2 1
SE1-14-B6
20
1
1
SE1-12-D24 /8 18 /814
1010
/4 /8
8 /14
SE1-18-429-B
1 103/8
D
3
1 12 /8
13
14 /8
1
1613/8
1 3
181 /8
8 3/812 x 12
E
10 3/814 x 14
8 3/8
16 x 16
12 3/8 3
10
18/x8 18
14 3/8 3
12
20/x8 20
1 1/8
SE1-16-B6
8 7/8 8 1/12
SE1-20-428-B
/8 201/81511 3/411 1/11
SE1-14-B62622
4
1 2011/2
x 18
16 314
/8223/x8 22 1816
x 16
1
1
18316
/8 3/8
2018
x 20
x 18
1
1
20118
/2 3/8
x 22
2220
x 20
1
201/2
22 x 22
1
SE1-18-B4
SE1-16-B6 24 /8 221/8
14 11 3/4 10 7/88 7/8
SE1-20-B3
SE1-18-B4 261/8 241/8 141/4 14
SE1-20-B3
E
D 83/8
Damper
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
141/4
11
STEAM SPECIALTIES
E
261/8
11 10 7/8
16 x 16
14 x 14
VIBRATION ISOLATION
C
C
1
E
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
E
8
D
SPIRAL PIPE
& ACCESSORIES
Size 8-12
MODEL SP DOWNSIZE
CEILING EXHAUST FANS
MODEL SP6
Model SP-6 ceiling exhaust fans have steel housings, high strength polymer grilles
with torsion springs for secure fit, integral backdraft dampers, and motors that are
permanently lubricated, shaded pole with built in overload protection. A plug-in disconnect is provided inside the housing. Model SP-6 features adjustable steel mounting
brackets and forward curved wheels.
By Broan
DIMENSIONAL DATA
Model
A
B
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
12
SP-6
91/4
10
C
D
E
Grille Size
Wt.
53/4
4
33/8
12 x 113/8
8
For complete dimensional information, see submittal drawings.
Model
RPM
AMP
Watts
(Input)
SP-6
1280
0.40
43
CFM
Sones
GRILLE SIZE
GRILLE SIZE
$113
Models SP-B50 - B200 features corrosion resistant galvanized steel fan housing
& scroll, white high impact polystyrene grille with two attachment screws, and a
forward curved fan wheel that is dynamically balanced for vibration free operation.
Motors are 115/60/1 with built in thermal overload protection. Angle mounting
brackets can be adjusted to any typical ceiling material thickness.
GRILLE SIZE
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
RPM
Model
A
B
*C
D
E
B50, 70, 80
137/8
111/2
7
6
11/4
B90, 110, 150, 200
137/8
111/2
7
6
11/4
625
Std Grille
Decorative
Grille
Unit
Wt.
151/4 sq.
9
151/4 sq.
10
147/8 x
131/4
147/8 x
131/4
For complete dimensional information, see submittal drawings.
AMP
Watts
(Input)
0.000
0.100
CFM/STATIC PRESSURE IN INCHES OF W.G.
0.125
0.250
0.375
0.500
CFM
67
54
51
Sones
1.2
1.4
1.4
CFM
89
75
71
SP-B70
675
0.16
17.1
Sones
0.8
0.8
0.9
CFM
94
81
77
SP-B80
900
0.16
18.6
Sones
0.8
0.9
0.9
CFM
104
92
89
SP-B90
700
0.18
21.1
Sones
1.0
1.0
1.0
CFM
133
114
110
SP-B110
950
1.14
80.2
Sones
1.5
1.5
1.5
CFM
160
156
155
SP-B150
1050
1.70
128
Sones
2.5
2.5
2.5
CFM
197
195
194
SP-B200
1100
2.20
172
Sones
3.5
4.0
4.0
Model 5W (6 Amp) Solid State Speed Controller (SP-6, SP-B50 - B-200, SP-A50 - A900)
Model 10W (10 Amp) Solid State Speed Controller (SP-A1050 - A1550)
SP-B50
Price
Each
0.500
DIMENSIONAL DATA
Model
VIBRATION ISOLATION
CFM/STATIC PRESSURE IN INCHES OF W.G.
0.100
0.125
0.250
0.375
80
77
67
59
2.0
2.3
2.6
2.9
GRILLE SIZE
PERFORMANCE DATA
STEAM SPECIALTIES
0.000
80
2.0
MODEL SP-B50 - B200
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
PERFORMANCE DATA
0.50
37.8
Performance shown is for Model SP exhaust for installation type B: Free Inlet, Ducted outlet.
Performance ratings include the effects of an inlet grille and backdraft damper in the airsteam.
Speed (RPM) shown is nominal. Performance is based on actual speed of test.
40
2.0
54
1.4
62
1.3
72
1.5
97
2.0
154
3.0
191
4.5
29
3.0
35
2.0
46
2.0
57
2.0
95
2.0
152
3.5
187
4.5
0.625
0.750
1.000
Price
Each
$95
$108
$108
$108
94
2.0
149
3.5
184
5.0
91
3.0
147
4.0
181
5.0
85
3.5
138
4.5
166
5.5
50
4.5
92
5.0
128
5.5
$121
$160
$160
$44
$84
The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field
calculated per AMCA Standard 301. Values are for installation type B: free inlet sone levels.
The AMCA Certified Ratings Sound Seal applies to sone ratings only.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
13
FANS / DAMPERS /
CURBS
MODEL SP
CEILING EXHAUST FANS
DIMENSIONAL DATA
A50, 70, 90
A110, 125, 190
A200, 250,
290, 390
A410, 510
A700
A710, 780
RPM
AMP
Watts
(Input)
SP-A50
790
0.33
25.9
SP-A70
790
0.14
15.6
SP-A90
870
0.14
16.9
SP-A110
950
0.16
19.4
SP-A125
1010
0.19
23
SP-A190
1400
0.45
54.2
0.47
56.1
SP-A250
1000
0.56
67
SP-A290
1050
0.72
80.7
SP-A390
1350
1.34
135
SP-A410
1000
1.74
121
SP-A510
1070
3.30
224
SP-A700
1100
3.20
350
SP-A710
1080
4.40
285
1600
3.30
348
8
6
147/8 x 131/4
147/8 x 131/4
Unit
Wt.
12
17
8
8
147/8 x 131/4
24
8
8
8
193/8 x 163/8
251/8 x 131/2
193/8 x 163/8
31
34
34
9
9
117/8 111/4
6
8
18 143/8 141/2
235/8 115/8 115/8 191/2
18 143/8 141/2 10
CFM/STATIC PRESSURE IN INCHES OF W.G.
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
0.000
0.100
0.125
0.250
89
0.4
88
0.3
114
0.3
130
0.3
144
0.4
229
2.5
267
2.0
294
2.5
315
2.5
410
4.5
443
3.5
557
5.0
757
5.0
752
6.0
812
8.5
66
0.6
74
0.3
101
0.3
119
0.3
130
0.4
214
2.1
246
2.0
274
2.5
293
2.5
395
4.5
413
3.0
512
4.5
730
5.0
714
6.0
782
8.5
61
0.6
71
0.3
98
0.3
115
0.3
127
0.4
210
2.1
242
2.0
271
2.5
287
2.5
391
4.5
405
3.0
501
4.5
723
5.0
701
6.0
775
8.5
31
0.9
54
0.3
80
0.4
98
0.5
109
0.6
186
1.8
224
2.5
250
3.0
257
3.0
368
4.5
351
3.0
439
4.5
700
5.5
653
6.0
741
8.0
0.375
0.500
0.625
0.750
0.875
1.000
Price
Each
$165
$175
$178
$178
$228
156
1.6
199
3.0
230
3.5
231
3.0
345
5.0
306
3.5
392
4.5
679
5.5
588
6.0
704
8.0
$238
162
3.5
201
4.0
207
3.5
325
5.0
109
4.0
147
5.0
175
3.5
307
5.5
68
4.5
92
5.0
124
4.5
279
5.5
$238
$238
$265
$280
$298
325
4.0
649
6.0
486
5.5
665
8.0
$362
613
6.0
320
5.5
625
8.0
494
6.5
396
6.5
$443
$453
581
8.0
$453
MODEL SPA900-A1550
Model
A
B
C
D
E
Grille Size
Wt.
A900-A1550
233/4
143/8
141/2
177/16
8
25 x 163/8
56
Model
RPM
AMP
Watts
(Input)
SP-A900
950
4.00
285
SP-A1050
1095
6.30
420
1450
7.40
786
SP-A1550
1610
8.60
818
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
Performance shown is for Model SP exhaust for installation type B: Free Inlet, Ducted outlet.
Performance ratings include the effects of an inlet grille and backdraft damper in the airsteam.
Speed (RPM) shown is nominal. Performance is based on actual speed of test.
0.100
0.125
0.250
0.375
0.500
0.625
955
4.0
1125
6.0
1455
10.0
1607
10.5
907
5.0
1059
6.0
1415
10.0
1558
10.0
896
5.0
1043
6.0
1404
10.0
1558
10.0
841
5.0
964
6.0
1353
10.0
1506
10.0
773
5.0
885
5.5
1307
10.0
1449
10.0
701
5.0
796
5.5
1262
10.0
1407
10.5
662
5.5
1218
10.0
1369
11.5
0.750
Price
Each
$662
$662
1174
10.0
1323
13.0
$662
$732
The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA
Standard 301. Values are for installation type B: free inlet sone levels.
The AMCA Certified Ratings Sound Seal applies to sone ratings only.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
SP-A1410
CFM/STATIC PRESSURE IN INCHES OF W.G.
0.000
VIBRATION ISOLATION
PERFORMANCE DATA
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
DIMENSIONAL DATA
560
6.5
SPIRAL PIPE
& ACCESSORIES
900
14
Grille Size
D
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SP-A200
131/4 105/8
131/4 105/8
E
C
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Model
B
VAV TERMINALS /
HOT WATER COILS
PERFORMANCE DATA
SP-A780
A
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Model
MODEL SPA110-A780
VARIABLE SPEED
DRIVES & STARTERS
Model SP ceiling exhaust fans are whisper quiet centrifugal fans for offices, toilets and general ventilation. Housings are corrosion resistant galvanized steel with an interior
lined with sound absorbing insulation for quiet operation. Grilles are white and attach to fan housing with two screws. Grilles for sizes A50-A390 are made of high impact
polystyrene. Grilles for sizes A410-A1550 are constructed of aluminum coated with baked enamel. Fan wheels are double width forward curved centrifugal type in a single
scroll for A50-A780. A900-A1550 have twin double width forward curved wheels in separate scrolls driven by a single motor. All wheels are dynamically balanced for
vibration-free operation. Motors are 115/60/1 with built in thermal overload protection, sized to match fan loads and mounted on vibration isolators. The electrical access
cover located on the housing exterior permits external wiring without removing the power assembly, saving installation time and cost.
MODEL CSP INLINE CABINET FANS
The Model CSP fan is designed for inline discharge, intake and air boosting applications with a duct system. The fan housing is constructed of corrosion
resistant galvanized steel lined with sound absorbing insulation for quiet operation. Removable bottom housing panel allows easy access to the power
assembly for inspection or service. Angle mounting brackets can be adjusted to any typical ceiling material thickness. Outlet duct connection with
integral backdraft damper can be converted from horizontal to vertical discharge. Fan scroll is constructed of galvanized steel. Fan wheels are double
width forward curved centrifugal type for CSP A-110-A780. CSP A900-A1550 have twin double width forward curved wheels in separate scrolls driven
by a single motor. All wheels are dynamically balanced for vibration free operation. Motors for CSP A110-A1550 are 115/60/1. Motors are sized to
match fan loads and mounted on vibration isolators. Power assemblies can be easily unplugged and removed for inspection or service.
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
14
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
DIMENSIONAL DATA
VAV TERMINALS /
HOT WATER COILS
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Model
A
B
137/8
B110, 150, 200
111/2
127/8
A110, 125, 190
105/8
14
117/8
A200, 250, 290, 390
18
143/8
A410, 510
A700
235/8
115/8
18
143/8
A710, 780
*Inlet Dimensions
**Optional Discharge Posititon
CSP B110-B200
CSP A110-A780
PERFORMANCE DATA
Model
RPM
AMP
CSP-B110
950
1.14
80
CSP-B150
1050
1.7
129
CSP-B200
1100
2.2
173
CSP-A110
950
0.62
20
CSP-A125
1100
0.63
33
CSP-A190
1400
1.10
55
CSP-A200
900
0.43
58
CSP-A250
1000
0.79
67
CSP-A290
1050
0.71
102
CSP-A390
1350
1.33
161
CSP-A410
1000
1.87
132
CSP-A510
1070
3.11
218
CSP-A700
1100
3.20
352
CSP-A710
1080
4.40
333
1600
3.77
496
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
CFM
Sones
0.000
0.100
0.125
0.250
103
1.5
151
2.0
186
3.0
124
0.8
138
1.1
215
2.0
254
0.6
266
0.9
318
1.1
412
2.0
447
1.5
545
2.5
766
2.0
737
2.5
813
3.0
100
1.5
150
2.0
184
3.0
112
0.8
126
1.1
202
1.5
231
0.4
246
1.0
299
1.2
400
2.0
441
1.5
514
2.0
755
2.0
698
2.5
784
3.0
100
1.5
149
2.0
184
3.0
110
0.8
124
1.1
198
2.0
226
0.5
241
1.0
292
1.3
397
2.0
403
1.5
506
2.0
752
2.0
688
2.5
777
3.0
98
2.0
148
2.0
182
3.0
102
0.9
114
1.0
180
2.0
203
0.9
221
2.0
265
2.0
382
2.5
364
2.0
464
2.0
739
2.0
635
2.5
742
3.0
Inlet
F
G
131/2
31/4
12
91/4
127/8
10
167/8
131/4
225/8
101/2
167/8
131/4
Wt.
10
16
23
36
34
36
0.375
0.500
0.625
0.750
0.875
Price
Each
1.000
$127
$142
$159
77
0.9
91
1.2
159
2.5
178
1.0
205
2.5
248
2.5
363
3.0
317
2.0
405
2.0
726
2.0
567
2.0
707
3.0
$202
$202
121
2.5
145
1.3
187
3.0
229
3.5
339
4.0
217
2.0
324
2.5
702
2.0
475
2.0
672
2.0
$238
109
1.5
165
2.5
201
3.0
324
4.5
70
1.5
132
2.5
144
3.0
309
4.5
$240
$240
$265
$280
$298
$362
678
2.0
334
2.0
638
3.0
635
2.5
549
2.5
418
4.0
603
3.0
567
527
$443
$453
$453
DIMENSIONAL DATA MODEL CSP A900-A1550
Model
A
B
C
D
E
F
G
Wt.
900, 1050,
1410, 1550
233/4
143/8
141/2
183/4
8
225/8
131/4
59
Model
RPM
AMP
**Optional Discharge Posititon
For complete dimensional information, see submittal drawings.
PERFORMANCE DATA
VIBRATION ISOLATION
Outlet
D
E
6
11/4
8
6
8
8
8
8
191/2
8
10
8
CFM/STATIC PRESSURE IN INCHES OF W.G.
*Inlet Dimensions
STEAM SPECIALTIES
C
7
9
111/4
141/2
115/8
141/2
For complete dimensional information, see submittal drawings.
Watts
(Input)
CSP-A780
MODEL CSP B110-A780
Watts
(Input)
CFM/STATIC PRESSURE IN INCHES OF W.G.
0.100
0.125
0.250
0.375
0.500
CFM
908
852
Sones
1.4
1.4
CFM
1182
1110
CSP-A1050
1095
6.65
469
Sones
2.5
2.5
CFM
1584
1543
CSP-A1410
1450
7.80
871
Sones
3.5
3.5
CFM
1672
1618
CSP-A1550
1610
8.32
913
Sones
5.0
4.5
Model 5W (6 Amp) Solid State Speed Controller (CSP-B110 - B200, CSP-A110 - A900)
Model 10W (10 Amp) Solid State Speed Controller (CSP-A1050 - A1550)
841
1.4
1093
2.5
1533
3.5
1604
4.5
782
2.0
1013
2.5
1483
3.5
1543
4.5
715
2.5
922
2.5
1439
3.5
1484
4.5
631
3.0
832
2.5
1395
3.5
1427
4.0
CSP-A900
950
4.87
335
0.000
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
0.625
0.750
0.875
1.000
Price
Each
$662
743
2.5
1345
3.5
1367
4.0
$662
1293
3.5
1307
4.5
1238
4.0
1240
4.5
1181
4.0
1172
4.5
$662
$732
$44
$84
15
FANS / DAMPERS /
CURBS
SP AND CSP ACCESSORIES
National Fire Protection Association (NFPA) Standard 90A requires that openings in fire rated
ceiling/floor assemblies must be protected by appropriately rated ceiling radiation dampers.
As a result, many local codes require that fans installed in fire rated ceilings must also be
protected by dampers which are insulated against both heat and flame.
CRD Size
310
A
131/2
B
111/8
Material
Gauge
22
Price
Each
$69
320
143/8
121/4
22
$74
350
187/16
1415/16
22
$104
SPIRAL PIPE
& ACCESSORIES
SP
Model
A50-A190
B50-B-200
A200-A390
A410-A510
A710-A780
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DIMENSIONAL DATA
BHP –
Revolutions Per Minute. Measure of fan speed.
Tip Speed. The speed of the tip of a fan wheel or prop measured
in feet per minute.
AMCA – Air Movement and Control Association. A nationally recognized
association which establishes standards for fan testing and
performance ratings. Certifies air volume and sound ratings.
U.L. –
Underwriters Laboratories. An organization which estalishes
and operates product safety certification programs and tests
products for safety.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
HP –
RPM –
TS –
VIBRATION ISOLATION
Sone –
Cubic Feet Per Minute. A measure of air flow quantity.
Static Pressure. Resistance to airflow measured in inches of
water column.
A measure of loudness. One sone can be approximated as the
loudness of a quiet refrigerator at adistance of 5 feet. Sones
follow a linear scale, that is, 10 sones are twice as loud as 5
sones.
Brake Horsepower. A measure of power consumption. Used to
determine the proper motor horsepower and wiring.
Horsepower. Measure of a motor’s power output. Used to
indicate a fan’s motor size.
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
TERMS
CFM –
SP –
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
The galvanized steel frame of the ceiling radiation damper is sized to match the Model SP
housing. This design saves space by allowing the damper to mount directly beneath the fan.
The damper adds approximately 3” in height to the combined installation.
VAV TERMINALS /
HOT WATER COILS
Once the accumulation of heat in the airstream reaches the temperature limits of the fusible
link, the closure mechanism is activated. Stainless steel closure springs draw the ceramic
blanket securely over the damper opening. Standard fusible links activate at air temperatures
of 165˚F. Other links are available.
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
The Greenheck SP (60 Series) ceiling radiation damper option protects fire rated ceilings and
effectively blocks the spread of heat and flames through the building’s ventilation system.
This damper is U.L. Classified, rated at three to four hours fire resistance, and is available
for SP fan sizes 50 through 1550. Its non-asbestos, ceramic blanket provides the required
thermal barrier for fire rated ceilings while also protecting both the fan and the ductwork.
The ceramic blanket stows compactly against the damper frame to permit maximum free
area and eliminate performance losses.
VARIABLE SPEED
DRIVES & STARTERS
CEILING RADIATION DAMPER
FANS / DAMPERS /
CURBS
16
SP AND CSP DISCHARGE ACCESSORIES
D
C
D
VARIABLE SPEED
DRIVES & STARTERS
D
D
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
B
C
A
B
ModelA
For use
with sizes
RJ-4
B50-B80
B90-B200
A50-A390
B
A410-A1050
VAV TERMINALS /
HOT WATER COILS
A
B
A C B
A C
B
A C
E
A C
A C
E
Throat
Dia.
Price
Each
11B
91/4
81/4
55/16
41/2
4 in. Dia.
$36
141/4
141/2
103/8
61/2
6x9
$43
181/2
271/2
153/4
235/8
91/2
10 x 10
$97
FLEXIBLE DUCT /
SNAPLOCK & ACC.
E
BE
D
D
E
For use
with sizes
WC-4 E
B50-B80
B90-B200
A50-A190
D
A200-A510
10” Round
12” Round
WC-8
SDWVA-10
SDWVA-12 C
D
A
All C
dimensions inDinches.
A
SPIRAL PIPE
& ACCESSORIES
C
C
C
D
D
MODEL WC & SDWVA
(Rounded Connection)
Hooded Wall Cap
•D Aluminum construction-Aluminum finish
• For outside wall applications
• Built in damper
• Bird screen (not available on WC-4)
E
E
E
E
WC-6
D
B
D
D
A
B
C
D
E
Price
Each
6
4
23/4
5
$28
41/8
5
$34
51/8
7
9
31/2
81/2
81/2
$53
$62
$73
D61/2
G
8
B 111
13 /2
G
141/2
G
B
G
B
E
A
B
G
8
11
13
14
E
F
E
F
E
A
F
6
F
F
8
E10
12
1
1
MODEL WC (Rectangular Connection) 11 2"
911/22"
3 /2 1 "
Hooded Wall Cap
10 "
/8
1
1
1 "
91/12"1 1
3 /2finish
• Steel construction with black enamel
/2 "
101" 1
1 2"
19/12 /2"
3/
• For outside wall applications
"
1 "
10 "
5 /8
• Built in damper
• Built in birdscreen and damper
11 11
A
B
C
D
E
F
G
Price
Each
WC-10x3
WC-8x8
WC-18x8
50-290
200-510
700-1550
51/2
101/4
101/4
123/4
101/4
201/4
31/2
81/4
81/4
101/4
81/4
181/4
111/8
81/4
181/4
41/4
63/4
63/4
5
5
5
$32
$59
$115
MODEL RDC
1 "
91/2"
Round Duct
3 /2Connector
10 "
• Replaces the standard square
discharge duct connector and damper
• Uses existing mounting holes
• Galvanized steel construction
11 1
/2 " a damper
• RDC-8 does not include
1 "
VIBRATION ISOLATION
11 1
/
11 1 2 "
/2 "
1 "
11 /8
All dimensions in inches.
5 /8
STEAM SPECIALTIES
1901/"2"
10 "
1 8"
1
8
11 /
11 /
For use
with sizes
Model
For use with sizes
Dia.
Price Each
RDC-6
RDC-8
A110-A190
A200-A510
6
8
$21
$27
All dimensions in inches.
"
C
1 8"
Model
E
11 /
1 "
3 /2
3 /2
"
11 /8
1 8"
F
A
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
D
18
B3/4
E
Model
B
C
All dimensions in inches.
B
G
ACCESSORY PRESSURE DROPS
The chart below can be used with all of the discharge accessories
shown on these two pages. Specific pressure drop values for
these accessories must be included in total system calculations
for proper fan selection.
B
E
RJ-10x10
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
C
A
E
MODEL RJ
Pitched Roof Cap
• Steel construction with black
B enamel finish
• Integral flashing flange
• Built in birdscreen and damper
C
A
RJ-6x9
B
E
DE
E A
C
C
/22 "
1
MODEL EL - 10X3
E
Elbow Discharge
with Grille
B
E
• DesignedCfor installation under
roof eaves
CD
AB
D
steel louvered Agrille
E• Painted
C
B
• Built in damper
1 "E
5 /8
B
• DFor SP-C/SP-B/SP-A sizes 50-290
E
A 110-290
• For CSP-B/CSP-A sizes
91/2"
D
DModel
"
51/88"
1 8"
5/
C
A
For use with sizes
Price Each
50-290
A
$50
EL-10x3
All dimensions in inches.
"
5 /8
1
MODEL WL
Wall Louvered Discharge
• Anodized aluminum grille
B • Built in damper
• Not recommended for exterior
applications exposed to severe
weather conditions. An external
wall louver is recommended for
such applications.
C
E
D
A
Model
For use with sizes
A
B
C
D
E
Price Each
WL-10x3
WL-18x6
50-290
390-1550
12
193/4
51/4
8
10
18
73/4
9
31/2
6
$151
$204
All dimensions in inches.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
B
17
FANS / DAMPERS /
CURBS
SP AND CSP ACCESSORIES
FLASHING FLANGE
CURB CAP
MODEL RFC-7
• Weathertight aluminum
construction
• Integral birdscreen
• Built in flashing flange
WITH FLASHING FLANGE
D
Throat
Dia.
Price
Each
A
B
C
RCC-7
50-390
15
12
10
63/8
7
GRS-8
50-390
19
201/2
71/4
11/2
19
20 /2
3
GRS-10
410-710
7 /4
GRS-12
GRS-16
780-1050
22
29
1410-2150
26
29
GRS-20
3600
30
35 /2
1
1
Model
For use
with sizes
A
B
C
D
$120
RFC-7
50-390
18
12
10
81/4
$154
GRSF-8
50-390
23
201/2
2
10 /4
$169
GRSF-10
410-710
23
10
1
3 /2
12 /4
$178
GRSF-12
780-1050
11
41/4
165/16
$253
GRSF-16
1410-2150
11 /4
3 /4
20 /16
$313
GRSF-20
3600
1
1
1
3
5
Throat
Dia.
Price
Each
63/8
7
$111
71/4
11/2
81/4
$144
20 /2
3
7 /4
2
10 /4
$159
26
29
10
1
3 /2
12 /4
$168
30
29
11
41/4
165/16
$236
34
35 /2
11 /4
3 /4
20 /16
$294
1
1
1
3
1
1
5
HANGING VIBRATION ISOLATORS
Vibration isolator kits are available for suspended installations. Kits include all
hardware necessary to mount one unit, with the exception of 1/4-20 threaded
rod to be supplied by others. Fan mounting brackets include prepunched
mounting holes for ease of installation.
A
B
Price Each
B50-B200
1
4 /2
15 /8
$24
A50-A190
51/2
145/8
$24
A200-A390
3
6 /4
15 /2
$24
A410, A510
A710, A780
1
9 /4
19 /8
$24
A700
51/2
251/8
$24
A900-A1050
A1410-A1550
91/4
253/8
$24
5
1
5
VIBRATION ISOLATION
SP/CSP Size
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
1/4-20 hanging
support rod by
others
B
SPIRAL PIPE
& ACCESSORIES
A
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Model
For use
with sizes
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
WITH CURB CAP
MODEL GRSF
• All aluminum exterior
construction
• Galvanized steel internal
supports
• Integral birdscreen
• Built in flashing flange
VAV TERMINALS /
HOT WATER COILS
MODEL GRS
• All aluminum exterior
construction
• Galvanized steel internal supports
• Integral birdscreen
• Built in curb cap
• Requires roof curb
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
MODEL RCC-7
• Weathertight aluminum
construction
• Integral birdscreen
• Built in curb cap
• Requires roof curb
VARIABLE SPEED
DRIVES & STARTERS
ROOF DISCHARGE ACCESSORIES
All dimensions in inches.
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
FANS / DAMPERS /
CURBS
18
ROOF VENTILATORS
VARIABLE SPEED
DRIVES & STARTERS
MODEL GRS GRAVITY INTAKE/RELIEF VENTILATOR
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Model GRS is an aluminum ventilator designed to be used as an intake or relief unit on natural gravity or
positive pressure systems. The GRS appearance blends with other Greenheck products and, with its low
silhouette, avoids the problem of detracting from architectural aesthetics.
VAV TERMINALS /
HOT WATER COILS
DIMENSIONAL DATA AND PRICES
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
/
S
A
410 Damper
Intake
Size
ADD
$75
8x8
$47
8x8
$86
19
$75
10 x 10
$51
10 x 10
$87
$178
22
$82
12 x 12
$53
12 x 12
$87
1.12
$244
22
$82
16 x 16
$61
16 x 16
$113
165/16
1.45
$253
26
$98
16 x 16
$61
16 x 16
$113
201/4
1.83
$304
30
$114
18 x 18
$78
18 x 18
$137
20 /16 uction
2.25is all$313
x 18 galv
18ed
x 18
$114 18 18
$78 aniz
constr
welded30unitized,
gauge
steel shell and base, wood nailer, and flashing cap of 20 gauge galvanized
1
34
4
241/2
3.24
34
24 x 24
24 x 24
$463
$130
$139
5”
steel38
. /4 11
Price
Each*
Length
Freight
12”
’
r6
$137
B
C
D
Throat
Dia.
Throat
area
(FT2)
Price
Each
GRS-8
19
201/2
71/4
11/2
81/4
0.37
$154
19
GRS-10
19
201/2
73/4
2
101/4
0.57
$169
GRS-12
22
29
10
31/2
121/4
0.82
GRS-15
22
29
10
31/2
141/4
GRS-16
26
29
11
41/4
GRS-18
30
351/2
73/4
13/4
GRS-20
1
3
30
/2 111/4
/4
The 35
equipment
r3ail
3’
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
STEAM SPECIALTIES
VIBRATION ISOLATION
B
100 Damper
Relief
Size
ADD
A
GRS-24
E
12” Roof
Curb
Model
ADD
MODEL
5
4’
o
General Ventilation Design
General Ventilation Design
3'
$88
Included
4'
$112
Included
*6'
$146
Add Frt.
for Acceptable
Qualityof 18 gauge galvanized steel
Ventilation Rates Curbs
are 12" highIndoor
and are Air
constructed
Ventilation Rates for
Acceptable
Air
Quality*
with
welded seams.Indoor
They have
1-1/2"
thick, 3lb density rigid fiberglass
D
F
H
Space
Space
Auditoriums
Ballrooms/Discos
Bars
Beauty Shops
Classrooms
Conference Rooms
Correctional Facility Cells
Dormitory Sleeping Rooms
Dry Cleaners
Gambling Casinos
Game Rooms
Hardware Stores
Hospital Operating Rooms
Hospital Patient Rooms
Outdoor Air
Outdoor
Air
Occupancy
insulation, 2" flashing strip and factory installed
treated
wood
nailer
Outdoor
Outdoor
Air OOccupancy
ccupancy
Air Occupanc
y strip.
Required
Required
(People/
(People/
Space
Required
(P
eople/
Space
Required
(P
eople/
2
2
(CFM/person)
1000 ft2)
(CFM/person)
1000 ft )
(CFM/person) 1000
ft )
(CFM/pe
rson) Price
1000 ft2)
Curb
Maximum
15
25
30
25
15
20
20
15
30
30
25
15
30
25
Model
150
12
100
15
100
17
25
19
50
22
50
24
20
26
20
30
30
*34
120
*40
70
*46
8
*52
20
*58
10
A
B
C
Load (lbs)
20
1000
15
1000
15
1000
20
1000
15
1200
15
1200
15
1200
20
1330
15
1470
60
1600
15
1730
15
1870
15
Each
30
$59
20 Included
$61 20 Included
$66 7 Included
$66 20 Included
$75 10 Included
$80 20 Included
$86 70 Included
$98 20 Included
$10870 Add Frt.
$128150 Add Frt.
$129 8 Add Frt.
$147150 Add Frt.
Freight
561/2
561/2
12
2000
$165
Add Frt.
Laboratories
12
12
Librar
ies 12
1/2
1/2
13
13
12
Medical Procedure Rooms
1
1
15 /2 Spaces
15 /2
12
Office
171/2 macies
171/2
12
Phar
1/2
1/2
20
20
12
Photo Studios
1/2
1/2
22
22
12
Physical Therapy
1/2
1/2
24
24
12
Restaurant Dining Areas
1/2
1/2
28
28
12
Retail Facilities
1
1
32 /2
32 /2
12
Smoking
Lounges
381/2 ting Spectator
381/2
12
Spor
Areas
1/2
2
44
44/
12
Supermarkets
1/2
1/2
50
50
12
Theaters
*Adapted from ASHRAE Standard 62-1989 “Ventilation for Acceptable Indoor Air Quality”.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
$162
19
FANS / DAMPERS /
CURBS
INLINE CENTRIFUGAL FANS
MODEL SQ DIRECT DRIVE DIMENSIONS
1"
A
B sq.
1"
B sq.
C sq.
C sq.
B
C
E
SQ 80-95
16
15
117/8
1
SQ 100
21
17
137/8
1
SQ 120
21
19
157/8
1
MODEL BSQ BELT DRIVE DIMENSIONS
A
C sq.
B sq.
E
C sq. B sq.
A
21
21
21
22
26
28
B
171/8
171/8
191/8
231/8
261/8
271/8
C
137/8
137/8
157/8
197/8
227/8
237/8
D*
9
9
9
9
11
11
E
1
1
1
1
1
11/2
VIBRATION ISOLATION
Unit Size
BSQ 70-80-90
BSQ 100
BSQ 120
BSQ 140
BSQ 160
BSQ 180
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
D*
SPIRAL PIPE
& ACCESSORIES
E
• Model BSQ Belt Drive
Motors 1/4 HP are 115/60/1.
Motors 1/3 & 1/2 HP, 1 PH are 115/208-230/60/1 and wired for 115 volts.
Motors 1 HP, 3 PH and larger are 208-230/460/60/3 are wired for 208-230
volts.
BSQ motors are constant speed, open drip proof. (Contact your salesman for other styles.)
Units are shipped preset for maximum RPM and are adjustable. BSQ
sizes 70 through 90 are stocked with motors mounted and HP ratings as
cataloged.
BSQ sizes 100, 120, 140, 160, 180 are stocked less motors and drives.
See page 21.
Specify fan RPM, motor HP, voltage and phase required. Motor and drive
will be shipped separate for field installation.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
A
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Unit Size
STOCK NOTES
• Model SQ Direct Drive
SQ motors are 115/60/1. All fans can be used with a speed control and
offer thermal overload protection.
SQ-90 and 95 are equipped with 3-speed motors, field wired for either
1050, 1300 or 1500 RPM and can be shipped UPS.
SQ-90 and 95 are constant speed, totally enclosed. SQ100 are constant speed, open drip proof. (Contact your salesman for other styles.)
• Vari-Green® motor - 80% turndown, 85% efficient.
Available on select sizes.
VAV TERMINALS /
HOT WATER COILS
CONSTRUCTION FEATURES
• Galvanized steel housing.
• Two removable service panels.
• Formed collars for duct connection at inlet and outlet.
• Flexible motor leads and combination junction box and disconnect switch
(standard).
• BSQ motors, bearings and drives are mounted out of the airstream and
are cooled by ambient air.
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Model SQ and BSQ inline duct fans are designed for intake, exhaust, return
or makeup air systems that require high efficiency, mounting versatility,
low sound levels and ease of service. The square, compact housing design
permits mounting in any position, whether horizontal, vertical or at any
angle. Two removable panels provide access for service. Models SQ and
BSQ are licensed to bear the AMCA Certified Ratings Seals for sound and air
performance. BSQ models with motors mounted and all SQ sizes are UL listed.
VARIABLE SPEED
DRIVES & STARTERS
MODEL SQ AND BSQ
*Varies with motor size.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
®
FANS / DAMPERS /
CURBS
20
PERFORMANCE DATA AND PRICING
MODEL SQ
MODEL
HP
RPM
TS
Max.
BHP
SQ-80-VG6X
1/6
1725
4412
.055
1/50
1050
2989
.020
E
SQ-90
SQ-95
G
1/25
1300
3701
.040
D
1/10
1550
4412
.068
E
1/30
1050
2989
.031
G
1/15
1300
3701
.059
D
1/8
1550
4412
.100
SQ-95-VG6X
1/6
1725
5050
.100
SQ-100-A
1/4
1725
5052
.250
SQ-120-VG5X
1/2
1725
5927
.41
0.000
0.100
0.125
0.250
0.375
0.500
0.625
Sones
Sones
Sones
Sones
Sones
Sones
Sones
503
461
451
405
350
294
8.4
8.5
8.6
8.6
8.6
8.7
500
399
369
188
4.0
3.9
3.9
4.1
619
539
519
397
245
5.4
5.4
5.4
5.5
5.6
738
673
654
564
457
334
7.6
7.5
7.5
7.4
7.4
7.4
623
507
475
274
4.9
4.5
4.5
4.5
771
684
659
522
352
7.6
6.8
6.7
6.4
6.4
919
852
829
720
603
461
330
Damper
Size
ADD
$1007 12 x 12
$73
$594
12 x 12
$73
$594
12 x 12
$73
$1051 12 x 12
$73
$851
14 x 14
$79
$1479 16 x 16
$86
276
9.6
9.4
9.3
8.7
8.1
7.6
7.1
1024
1000
948
850
751
641
507
11.3
11.1
11.0
10.6
10.1
9.8
9.2
1454
1413
1402
1349
1292
1227
1156
13.1
12.5
12.4
11.9
11.5
11.1
10.7
1948
1897
1883
1818
1754
1692
1628
14.7
14.4
14.1
13.8
13.6
13.5
13.5
BAS 1P Magnetic Starter
Price
Each
W/DIS - $164
Hanging Rubber Vibration Isolator Kit (HVI-250) $74
Base Rubber Vibration Isolator Kit (BVI-250)
$101
Mounting Brackets (800201)
$47
Model 5W (6 Amp) Solid State Speed Control (thru Size 100)
$44
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
STATIC PRESSURE IN INCHES OF W.G. / CAPACITY (CFM)
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SQ & BSQ ACCESSORIES
VIBRATION ISOLATION
330
STEAM SPECIALTIES
®
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
21
HP
1/4
QD
BSQ-80-4
(1 Phase)
1/4
QD
BSQ-90-4
(1 Phase)
1/4
0.250
0.375
0.500
0.625
0.750
1.000
CFM
BHP
CFM
BHP
CFM
BHP
CFM
BHP
CFM
BHP
CFM
BHP
CFM
BHP
1730
16.1
349
0.18
323
0.18
293
0.17
260
0.17
227
0.17
192
0.16
112
0.15
1970
19.1
404
0.26
383
0.26
358
0.26
330
0.26
301
0.25
272
0.25
211
0.24
425
0.25
1580
14.6
610
0.16
570
0.17
526
0.17
477
0.17
420
0.17
362
0.16
1835
17.0
720
0.25
687
0.26
651
0.26
614
0.26
571
0.26
525
0.26
654
0.25
1440
12.2
805
0.15
741
0.16
669
0.16
588
0.16
480
0.15
1695
15.8
965
0.25
914
0.25
858
0.26
798
0.26
730
0.26
330
Damper
Price
Each
Size
ADD
$1412
12 x 12
$77
$1438
12 x 12
$77
$1442
12 x 12
$77
QD
BSQ-100
QD BSQ-120-4
(1 Phase)
QD
BSQ-160
BSQ-180
BHP
CFM
BHP
CFM
BHP
CFM
BHP
CFM
BHP
0.375
0.500
0.625
0.750
1.000
Price
Each
330
Damper
HP
PH
1/4
1
1610
15
1266
0.25
1207
0.26
1149
0.26
1089
0.26
1004
0.26
917
0.26
1/3
1
1765
16.3
1398
0.32
1345
0.33
1292
0.34
1240
0.34
1179
0.34
1101
0.34
924
0.34
$1496 14 x 14
1
3
2555
26
2065
0.96
2028
0.98
1991
0.99
1954
1.01
1917
1.02
1880
1.03
1809
1.05
$1802
1210
9.2
1283
0.17
1192
0.17
1098
0.18
992
0.18
860
0.18
1370
11.0
1475
0.24
1395
0.25
1315
0.26
1230
0.26
1135
0.26
1025
0.26
1/4
CFM
BHP
Size
$104
$565
$164
$127
$565
$784
23 x 23
$154
$565
$784
24 x 24
$154
$565
$784
18
3160
0.95
3096
0.97
3029
0.98
2954
0.99
2879
1.00
2800
1.02
2637
1.05
$1930
1 1/2
3
1960
24
3640
1.42
3584
1.44
3528
1.46
3469
1.48
3403
1.49
3338
1.50
3201
1.53
$1959 20 x 20
2
3
2135
29
3974
1.83
3923
1.85
3871
1.88
3820
1.90
3763
1.92
3703
1.93
3583
1.95
$1997
1
3
1390
17.5
3920
0.90
3827
0.93
3734
0.95
3637
0.97
3525
1.00
3412
1.02
3157
1.05
$2225
1590
22
4509
1.34
4428
1.37
4346
1.41
4265
1.43
4184
1.45
4085
1.48
3887
1.53
$2254
1750
27
4978
1.78
4904
1.81
4831
1.85
4757
1.88
4683
1.91
4609
1.93
4431
1.99
$2293
3
3
2000
38
5709
2.64
5645
2.68
5580
2.72
5516
2.77
5451
2.81
5386
2.83
5256
2.89
$2602
1
3
1140
16.1
4544
0.94
4407
0.96
4264
0.99
4122
1.00
3944
1.03
3755
1.04
3282
1.04
$2234
1 1/2
3
1310
19.6
5259
1.41
5445
1.44
5020
1.47
4896
1.50
4771
1.52
4629
1.54
4301
1.58
$2263
2
3
1440
23
5802
1.87
5698
1.90
5589
1.93
5476
1.96
5363
1.99
5250
2.01
4979
2.07
$2301
3
3
1645
28
6656
2.78
6565
2.81
6474
2.84
6376
2.88
6277
2.92
6178
2.95
5980
3.01
$2611
ACCESSORIES
Hanging Rubber Vibration Isolator Kit
HVI-250
BSQ 70-140
$94
Hanging Rubber Vibration Isolator Kit
HVI-440
BSQ 160-180
$135
BVI-250
BSQ 70-140
$128
Base Rubber Vibration Isolator Kit
BVI-440
BSQ 160-180
$169
Mounting Bracket
800201
SQ & BSQ
$60
QD - Orders received in Greensboro warehouse by 11:00 a.m. EASTERN TIME will normally ship within 24 hours. Call TOLL-FREE: 1-800-334-0254.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
Base Rubber Vibration Islator Kit
VIBRATION ISOLATION
Price Each
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
3
3
$164
$784
1710
2
$96
$565
$1533 16 x 16
1 1/2
W/DIS
$164
3
Fan Size
Starters
STD
$1447
1
DESCRIPTION
ADD
SPIRAL PIPE
& ACCESSORIES
QD
BSQ-140
CFM
0.250
FLEXIBLE DUCT /
SNAPLOCK & ACC.
QD
STATIC PRESSURE IN INCHES OF W.G. / CAPACITY (CFM)
Sones
@ 1/4”
0.125
SP
RPM
CFM BHP
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
MODEL
VAV TERMINALS /
HOT WATER COILS
BSQ PERFORMANCE DATA - MOTORS & DRIVES
FIELD MOUNTED
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
QD
BSQ-70-4
(1 Phase)
RPM
STATIC PRESSURE IN INCHES OF W.G. / CAPACITY (CFM)
0.125
VARIABLE SPEED
DRIVES & STARTERS
MODEL
Sones @
1/4” SP
FANS / DAMPERS /
CURBS
BSQ PERFORMANCE DATA - MOTORS & DRIVES
FACTORY MOUNTED
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
22
BACKDRAFT DAMPERS
All dampers feature a frame constructed of heavy gauge galvanized steel with prepunched mounting holes for ease of installation. Blades are fabricated
with vinyl on the closing edge. Each blade pivots on nylon bushings to assure quiet and smooth operation. Optional 120V motor packs are available
for field mounting.
Optional
Motor
Pack
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Airflow
Price
Each
Add Motor
Pack
8x8
$47
$89
10 x 10
$51
$89
12 x 12
$53
$89
$61
$89
18 x 18
$78
$89
24 x 24
$139
$89
30 x 30
$176
$89
10"
Max
Optional
Motor
Pack
Airflow
Damper
Size Sq.
65/8"
Max
A
VAV TERMINALS /
HOT WATER COILS
10"
Max
16 x 16
Damper Size Sq.
A
Damper Size Sq.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
QD
65/8"
Max
11/2"
/8" Max.1
Damper Size
Sq.
Price
Each
Add Motor
Pack
10 x 10
$76
$171
12 x 12
$82
$171
14 x 14
$89
$171
$102
$171
18 x 18
$108
$171
20 x 20
$134
$171
22 x 22
$163
$171
1 /2"
/8" Max.
SPIRAL PIPE
& ACCESSORIES
5
Airflow
Damper
Size Sq.
Airflow
Damper
Size Sq.
16 x 16
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Optional
Motor
Pack
Optional
Motor
Pack
MODEL 320
• Model 320 dampers are designed for use with
Greenheck sidewall propeller fans.
• A tie bar is added to assure uniform blade
opening and to counter balance the weight of
the blade assembly allowing the damper to
open fully at minimal airflow.
• NOTE: 320 is exhaust only.
Sizes 10 through 22 can be shipped UPS.
C
C
11/2"
VIBRATION ISOLATION
• Model 100 dampers are
designed for use with all
Greenheck roof mounted
exhaust fans.
• Sizes 12 through 30 are spring
assisted to aid in initial opening
on gravity operated models.
• Sizes 8 through 30 can be
shipped UPS.
Motor Pack is MP100/120/60/1V
5
STEAM SPECIALTIES
MODEL 100
11/2"
31/2"
Motor Pack is MP300/120/60/1V
101/4"
31/2"
101/4"
warehouse by 11:00 a.m. EASTERN TIME will normally ship within 24 hours. Call TOLL-FREE: 1-800-334-0254.
QD - Orders received in Greensboro
5 "
1 /16
5 "
/16
Prices1subject
to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
Airflow
Damper
Optional
Motor
Pack
23
FANS / DAMPERS /
CURBS
A
BACKDRAFT DAMPERS
33/8"
7"
$62
$171
9x9
$68
$171
10 x 10
$68
$171
12 x 12
$73
$171
14 x 14
$79
$171
16 x 16
$86
$171
QD
18 x 18
$127
$171
Optional
Motor
Pack
QD
20 x 20
$127
$171
7"
QD
23 x 23
$154
$171
QD
24 x 24
$154
$171
1 "
2
1/
1"
Airflow
Damper
Size Sq.
Optional
Motor
Pack
Damper
Size Sq.
Airflow
A
33/8"
A
• Model 330 dampers have been
designed for application with
Greenheck’s SQ in-line fans and
when a no flange damper is required.
A balanced design affords minimal
resistance to airflow.
• Sizes 8 through 24 can be shipped
UPS.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
8x8
/4"
3
MODEL 330
VAV TERMINALS /
HOT WATER COILS
Add Motor Pack
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Price
Each
VARIABLE SPEED
DRIVES & STARTERS
Damper Size
Sq.
Motor Pack is MP300/120/60/1V
11/2"
"
FLEXIBLE DUCT /
SNAPLOCK & ACC.
9"
1 "
2
1/
1"
Damper Size Sq.
$86
10 x 10
$87
12 x 12
$87
16 x 16
$113
A
18 x 18
$137
11/2"
24 x 24
$162
Damper
Size Sq.33/8"
Airflow
Optional
Motor
Pack
A
Airflow
• Model 410 non-motorized
dampers are designed for use with
Greenheck’s model RSF and GRS
supply fans, and Fabra Hoods.
• All sizes can be shipped UPS.
9"
NOTE: Actual damper size is 1/16” smaller than nominal size.
33/8"
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
A
Airflow
STEAM SPECIALTIES
Damper Size Sq.
QD - Orders received in Greensboro warehouse by 11:00 a.m. EASTERN TIME will normally ship within 24 hours. Call TOLL-FREE: 1-800-334-0254.
VIBRATION ISOLATION
"
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
8x8
MODEL 410
SPIRAL PIPE
& ACCESSORIES
Damper Size
Price Each
Sq.
ELECTRICAL ACCESSORIES
FAN SPEED CONTROL
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Manual motor starting switches are available in
three models. All models are U.L. Listed, HP rated,
specification grade and feature neoprene rockers for
quiet operation. Model MS-16 includes a pilot light.
All models require a handy box by others.
Model 5W – For applications up to 6.0 AMPS.
Requires 2 x 4 handy box by others.
Price Each: $44.00
Model 10W – For applications up to 10.0
AMPS. Requires 2 x 4 handy box by others.
Price Each: $84.00
Speeds
®
FAN SPEED CONTROL
Model
HP
Volts
PH
Price
1
MS-1
1/2
120
1
$7
1
MS-16 w/pl
1/2
120
1
$28
1
MS-4
2
200/277
1
$16
Model 867008– Vari Green Remote Dial Retrofit
Kit. Requires 2 x 4 handy box by others.
Price Each: $256.00
TIME DELAY SWITCH
MODEL GTD
The Model GTD Time Delay Switch is available
for keeping a fan or light operating for an
extended period of time after the initiating
switch has been turned off. The GTD assembly
consists of a single pole, single throw switch,
a timer and a cover plate.
Price Each: $106.00
THERMOSTAT ETD9STS
DISCONNECT SWITCHES
For safety in servicing fans not equipped
with factory mounted disconnects, switches
are available in seven models. Each model
includes a switch assembly, handy box and
cover plate.
Weatherproof Disconnect Switches in NEMA
rated waterproof boxes for positive electrical
shutoff and safety in servicing fans. NEMA 3R
toggle style switch models are listed below.
Model
Model
Wall-mounted line voltage thermostat is designed for on/off
Modelfor
control in cooling or heating applications. Recommended
fan and unit heater applications only. U.L. listed.
Requires standard handy box (not included).
Temperature Range: 50 - 90 F
Electrical Rating:
22 amps @ 125/277 VAC
3/4 hp @125 VAC, 1-1/2 hp @ 277 VAC
Price Each: $27.00
STEAM SPECIALTIES
VIBRATION ISOLATION
MANUAL STARTER
SWITCH
Speed controls are available in two models for use with shaded pole and open
permanent split capacitor motors in 115 volt single phase only.
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
24
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
Model
HP
Volts
PH
Price
STANDARD
NITS -1
up to 1/2
120
1
$9
NITS -2
3/4 to 1
120
1
$12
NITS -3
1-1/2 to 2
120
1
$35
NITS -4
1/4 to 2
200/277
1
$16
NITS -6
up to 7-1/2
230/460
3
$47
WEATHERPROOF
N3RTS-1
1/4 to 2
120
1
$87
N3RTS-6
up to 7-1/2
230/460
3
$93
25
FANS / DAMPERS /
CURBS
MAGNETIC STARTERS
VARIABLE SPEED
DRIVES & STARTERS
MODEL BAS1/MSAC
• UL Listed
• HOA Keypad
• BAS Compatible
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Fireman’s Override
• Type 1 Enclosures
VAV TERMINALS /
HOT WATER COILS
Model
BAS 1P
MSAC-1-9/J-40
120V
230V
$164
0.1 - 1 HP
0.1 - 1 HP
ELECTRONIC OVERLOAD - NEMA 1 ENCLOSURES
Three Phase
Price Each
208V
230V
460V
2 HP
2 HP
5 HP
$565
NEMA
Size
00
MSAC-1-18/J-40
$600
5 HP
7.5 HP
10 HP
0
MSAC-1-32/J-40
$634
7.5 HP
10 HP
20 HP
1
SPIRAL PIPE
& ACCESSORIES
Model
ELECTRONIC OVERLOAD W/DISCONNECT - NEMA 1 ENCLOSURES
Three Phase
Price Each
208V
230V
460V
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Model
Price Each
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
ADJUSTABLE OVERLOAD - SINGLE PHASE W/DISCONNECT
NEMA
Size
.5 HP
.5 HP
1 HP
00
MSAC-1-9/J-G4-40
$784
.75 HP
.75 HP
2 HP
00
MSAC-1-9/J-G6-40
$784
1 HP
1.5 HP
3 HP
00
MSAC-1-18/J-G8-40
$819
2 HP
2 HP
5 HP
0
MSAC-1-18/J-G13-40
$819
3 HP
3 HP
7.5 HP
0
MSAC-1-18/J-G17-40
$819
3 HP
5 HP
10 HP
0
MSAC-1-32/J-G26-40
$831
7.5 HP
7.5 HP
15 HP
1
MSAC-1-32/J-G32-40
$831
7.5 HP
10 HP
20 HP
1
VIBRATION ISOLATION
$784
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
MSAC-1-9/J-G2.5-40
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
AC DRIVES
By ABB
MODEL ACH580 - 208 VOLT
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
26
• UL Listed
• HVAC Designed
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Full Graphic Display
• Type 1 Enclosures
MODEL: ACH580-01-BASE DRIVE
MODEL
HP
VOLTAGE
PH
AMPS
FRAME
ACH580-01-10A6-2
3
208
3
10.6
R1
ACH580-01-017A-2
5
208
3
16.7
R1
ACH580-01-024A-2
7.5
208
3
24.2
R2
ACH580-01-031A-2
10
208
3
30.8
R2
ACH580-01-046A-2
15
208
3
46.2
R3
ACH-AP-H
Control Panel for All ACH580 Drives
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Contact your local salesperson for pricing.
MODEL: ACH580-VCR-W/ ELECTRONIC BYPASS & SERVICE SWITCH
MODEL
HP
VOLTAGE
PH
AMPS
FRAME
ACH580-VCR-10A6-2+F267
3
208
3
10.6
R1
ACH580-VCR-017A-2+F267
5
208
3
16.7
R1
ACH580-VCR-024A-2+F267
7.5
208
3
24.2
R2
ACH580-VCR-031A-2+F267
10
208
3
30.8
R2
ACH580-VCR-046A-2+F267
15
208
3
46.2
R3
Control Panel for All ACH580 Drives
Contact your local salesperson for pricing.
Please note: To extend your factory one (1) year warranty to a two (2) year warranty, Check, Test and Start is required by an authorized ABB
specialist. Please contact your local salesperson for more information.
STEAM SPECIALTIES
VIBRATION ISOLATION
ACH-AP-H
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
27
FANS / DAMPERS /
CURBS
AC DRIVES
By ABB
VARIABLE SPEED
DRIVES & STARTERS
MODEL ACH580 - 460 VOLT
• UL Listed
• HVAC Designed
• Full Graphic Display
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Type 1 Enclosures
PH
3
3
3
3
3
3
3
3
3
3
3
AMPS
3.0
4.8
7.6
12
14
23
27
34
44
52
65
FRAME
R1
R1
R1
R1
R2
R2
R3
R3
R3
R4
R4
FLEXIBLE DUCT /
SNAPLOCK & ACC.
HP
VOLTAGE
1.5
460
3
460
5
460
7.5
460
10
460
15
460
20
460
25
460
30
460
40
460
50
460
Control Panel for All ACH580 Drives
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
MODEL
ACH580-01-03A0-4
ACH580-01-04A8-4
ACH580-01-07A6-4
ACH580-01-012A-4
ACH580-01-014A-4
ACH580-01-023A-4
ACH580-01-027A-4
ACH580-01-034A-4
ACH580-01-044A-4
ACH580-01-052A-4
ACH580-01-065A-4
ACH-AP-H
VAV TERMINALS /
HOT WATER COILS
MODEL: ACH580-01-BASE DRIVE
Contact your local salesperson for pricing.
AMPS
4.8
7.6
12
14
23
27
34
44
52
65
FRAME
R1
R1
R1
R2
R2
R3
R3
R3
R4
R4
VIBRATION ISOLATION
HP
VOLTAGE
PH
3
460
3
5
460
3
7.5
460
3
10
460
3
15
460
3
20
460
3
25
460
3
30
460
3
40
460
3
50
460
3
Control Panel for All ACH580 Drives
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
MODEL
ACH580-VCR-04A8-4+F267
ACH580-VCR-07A6-4+F267
ACH580-VCR-012A-4+F267
ACH580-VCR-014A-4+F267
ACH580-VCR-023A-4+F267
ACH580-VCR-027A-4+F267
ACH580-VCR-034A-4+F267
ACH580-VCR-044A-4+F267
ACH580-VCR-052A-4+F267
ACH580-VCR-065A-4+F267
ACH-AP-H
SPIRAL PIPE
& ACCESSORIES
MODEL: ACH580-VCR-W/ ELECTRONIC BYPASS & SERVICE SWITCH
Contact your local salesperson for pricing.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
Please note: To extend your factory one (1) year warranty to a two (2) year warranty, Check, Test and Start is required by an authorized ABB specialist. Please
contact your local salesperson for more information.
FANS / DAMPERS /
CURBS
28
SUPPLY REGISTERS
VARIABLE SPEED
DRIVES & STARTERS
MODEL 620D & MODEL 520D
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Surface Mount
• Double deflection design for full side spread and drop control
• Model 620D is manufactured from corrosion resistant extruded aluminum
with an aluminum (B15) powder coat finish. Includes rollformed steel opposed
blade damper
• Model 520D is manufactured from stamped steel components with a white
(B12) powder coat finish. Includes rollformed steel opposed blade damper.
• Individually adjustable semi-airfoil blades
• Vertical front blades
• Outer frames with corner inserts for hairline mitered seams on larger sizes
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
ade Spacing
Opposed
Damper
F Border Shown
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
de Spacing
WxH
Nominal
CFM*
Aluminum
(B15)
Price Each
Steel
(B12)
Price Each
WxH
Nominal
CFM*
Aluminum
(B15)
Price Each
Steel
(B12)
Price Each
WxH
Nominal
CFM*
Aluminum
(B15)
Price Each
Steel
(B12)
Price Each
8x4
180
$45
$40
16 x 10
720
$94
$76
24 x 10
1300
$117
$100
8x6
260
$51
$46
18 x 6
480
$79
$66
24 x 12
1440
$130
$111
10 x 4
220
$51
$46
18 x 8
720
$89
$71
24 x 16
1720
$158
$133
10 x 6
340
$58
$46
18 x 10
855
$100
$80
30 x 8
1200
$135
$121
260
$57
$49
18 x 12
1070
$111
$91
30 x 10
1400
$155
$131
12 x 6
390
$64
$51
20 x 6
550
$87
$70
30 x 12
1800
$173
$150
12 x 8
480
$72
$60
20 x 8
750
$98
$79
30 x 16
2180
$209
$185
14 x 6
370
$68
$57
20 x 10
945
$104
$85
36 x 8
1440
$159
$133
14 x 8
550
$77
$63
20 x 12
1045
$113
$94
36 x 12
1950
$198
$170
16 x 6
415
$76
$60
24 x 6
750
$95
$76
36 x 16
2530
$243
$209
16 x 8
650
$87
$70
24 x 8
945
$111
$91
36 x 18
3000
$266
$233
STEAM SPECIALTIES
VIBRATION ISOLATION
12 x 4
F Border Shown
*Columbia Stock Steel (B12) Only.
*Performance based on a sound level of approximately NC 30. For more specific performance
information, consult your Hoffman & Hoffman representative or visit www.price-hvac.com
Nom. Duct Diameter
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 48
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t t t t t t t t t t t t
t Prices
t subject
t tto change
t twithout
t notice.
t All
t shipments
t t aretFOB Hoffman Warehouse, freight prepaid and added to invoice.
t t t t t t t t t t t t
t t t t t t t t t t t t
t t t t t t t t t t t t
t t t t t t t t t t t t
Touchup Paint...................................$23.00
12 oz aerosol can (White or Aluminum)
RETURN GRILLES AND REGISTERS
MODELS 630, 530, 630D, 530D
• Surface Mount
• Model 630 is constructed of extruded aluminum with an aluminum (B15) powder
coat finish
• Deflecting vanes are curved and set at 45°
• Horizontal front vanes
in. [19] Blade Spacing
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Model 530 is manufactured from rollformed steel components with a white (B12)
powder coat finish
VARIABLE SPEED
DRIVES & STARTERS
• Outer frames with corner inserts for hairline mitered seams on larger sizes
• Model 630D and 530D furnished with opposed blade damper
VAV TERMINALS /
HOT WATER COILS
MODEL 630D & MODEL 530D
Steel
(B12)
Price Each
6x6
125
$47
$39
8x8
235
$52
$39
10 x 10
370
$60
$46
12 x 12
400
$67
$51
Aluminum
(B15)
Price Each
Steel
(B12)
Price Each
WxH
Nominal
CFM*
Aluminum
(B15)
Price Each
Steel
(B12)
Price Each
WxH
Nominal
CFM*
Aluminum
(B15)
Price Each
Steel
(B12)
Price Each
14 x 14
710
$54
$40
24 x 18
1400
$88
$57
16 x 8
490
$47
$36
24 x 24
1700
$105
$70
16 x 10
550
$53
$39
30 x 12
1100
$87
$60
125
$35
$25
8x8
235
$37
$25
10 x 6
240
$37
$25
10 x 8
280
$40
$29
16 x 16
960
$67
$45
30 x 24
2150
$130
$91
10 x 10
370
$42
$32
18 x 12
805
$58
$43
30 x 30
3000
$153
$104
12 x 6
250
$39
$29
18 x 18
1000
$74
$51
36 x 18
2150
$124
$90
12 x 8
375
$42
$29
20 x 20
1300
$84
$56
36 x 24
2800
$146
$99
12 x 12
550
$47
$36
22 x 22
1600
$93
$63
36 x 30
3000
$170
$114
14 x 6
280
$40
$29
24 x 8
710
$58
$43
36 x 36
3600
$192
$131
14 x 8
420
$42
$32
24 x 12
925
$70
$46
48 x 24
3300
$224
$167
F Border Shown
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
list
rformance characteristics.
(core style, material, damper).
Touchup Paint...................................$23.00
12 oz aerosol can (White or Aluminum)
STEAM SPECIALTIES
*Columbia Stock Steel (B12) Only.
*Performance based on a sound level of approximately NC 30. For more specific performance
information, consult your Hoffman & Hoffman representative or visit www.price-hvac.com
VIBRATION ISOLATION
6x6
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
GRILLES AND REGISTERS
Aluminum
(B15)
Price Each
SPIRAL PIPE
& ACCESSORIES
Nominal
in. [13] Blade Spacing CFM*
WxH
Nominal
CFM*
FLEXIBLE DUCT /
SNAPLOCK & ACC.
F Border Shown
WxH
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
2
FANS / DAMPERS /
CURBS
4
29
RCDE Series
30
MISCELLANEOUS AIR DISTRIBUTION PRODUCTS
Models
VAV TERMINALS /
HOT WATER COILS
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
t )FBWZHBVHFTQVOTUFFMDPOTUSVDUJPO
• Steel construction with a white (B12) powder
coatIPSJ[POUBM
finish EJTDIBSHF TFUUJOHT GPS
t 5XP
different flow rate conditions. In the
• Two position adjustment
open position (E), maximum capacity
is obtained. In the closed position (F)
• Easily adjustable without requiring special tools
induction is increased, and the noise
Nominal CFM
Price Each
6
8
10
12
200
280
490
705
$99
$104
$113
$125
levels increase by 1 NC above those
shown in the performance table on page
C144.
t %FFQMZ DPOUPVSFE PVUFS DPOF QSFWFOUT
smudging.
A t &BTJMZB BEKVTUBCMF
D XJUIPVUE SFRVJSJOH
F
special tools.
t &YDFMMFOU
QFSGPSNBODF
GPS 7"7
within the
11 1/8applications
6 1/2 when
6 selected
1 3/4
1 1/8
range of tabulated performance values.
t
0QUJPOBM
XJSF
HVBSET
BWBJMBCMF
14 3/4protect
8 1/2diffuser 8face for2 1/8
1 UP
1/2
gymnasium
applications.
18 1/4 10 1/2
10
2 7/8 2 1/8
t $PNQMFUF SBOHF PG BWBJMBCMF BDDFTTPSZ
22 dampers,
12 1/2equalizing
12 grids3etc.
1/8 2 3/8
Finish
White Powder Coat
B12
For optional and special finishes see
color matrix
Available Sizes
MODEL 16 ROUND CEILING DIFFUSER
•
•
•
•
6 in. [152] to 24 in. [610] nominal duct/neck.
Steel construction with a white (B12) powder coat finish
Low cost design
Optional duct ring or damper
Ideal for residential, apartment, light commercial applications
RCDE Air Pattern
6
Nominal CFM*
135
8
10
12
225
345
500
Grille
Price Each
$20
$22
$28
$37
Product Selection Checklist
1] Select Unit Size based on specified inlet
Dimensional Data
12 — Imperial (in.) / Metric [mm]
Duct
Ring
Damper/w
diameter.
2]
Select
Outlet
Type
by
model
number.
Nominal
Size
Price
Each
Duct Ring
Size
A DIA A
B DIAB
3] Select Volume Control and / or Mounting
4]
Accessory, if desired.
Select Wire Guard / Safety Chain
$15
Select Finish.
$17
5]
$21
$27
VOLUME CONTROL DAMPERS
$26
$26
$32
$44
© Copyright Price Industries Limited 2014.
6
8
10
12
6
8
10
12
14
16
18
20
24
111/8 [283]
61/2 [165]
143/4 [375]
81/2 [216]
9 –15/16
5
–11/16
1
18 /4 [464]
101/2 [267]
22 [559]
121/2 [318]
11–15/16
7–11/16
26 [660]
141/2 [368]
161/2 [419]
29 [737]
13 –15/16
9
–11/16
321/2 [826]
181/2 [470]
36 [914]
201/2 [521]
15 –15/16
11 –11/16
1
43 /4 [1099]
241/2 [622]
VIBRATION ISOLATION
CD
D
E
6 [152]
8 [203]
1 –3/64
10 [254]
12 [305]
1–7/32
14 [356]
16 [406]
1 –25/64
18 [457]
20 [508]
1 –9/16
24 [610]
13/4 [45]
21/8 [54]
11/16
27/8 [73]
31/8 [79]
11/16
33/4 [86]
4 [102]
11/16
43/4 [121]
57/8 [149]
11/16
73/4 [197]
All Metric dimensions ( ) are soft conversion.
Imperial dimensions are converted to metric and rounded to the nearest millimeter.
• Model VCR8E butterfly style, steel construction
• Model VCR9 radial shutter style, steel construction, low profile for flex duct installations
• Sizes match Price diffusers
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
CEILING DIFFUSERS
Size
Size
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Horizontal Air Pattern
Two Position Adjustment
RCDE
Price RCDE round cone ceiling diffusers
feature a spring lock arrangement permitting
quick, easy removal of the inner cone
assembly. Ample adjustment of inner screw
allows two different horizontal air patterns.
Features
MODEL RCDE
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
Product Information
Size
VCR8E
6
8
10
12
14
$17
$19
$19
$20
$31
EF DIA
11/8 [29]
11/2 [38]
6 –1/2
21/8 [54]
23/8 [60]
8–1/2
25/8 [67]
31/4 [83]
10
–1/2
37/8 [98]
47/8 [124]
12 –1/2
65/8 [168]
VCR9C-159
$19
$20
$23
$25
$36
Five Segment Blades are rotated
to desired Damper Configuration
Mounting Clip
Model VCR8E
Top View of Damper
A ± 1/32
STEAM SPECIALTIES
Ref. Detail of
Diffuser Neck-Inlet
Model VCR9
*Performance based on a sound level of approximately NC 30. For more specific performance
information, consult your Hoffman & Hoffman representative or visit www.price-hvac.com
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
49/64"
Use Std. Flat Blade Screwdriver
to Operate Damper
Side View of Damper
31
FANS / DAMPERS /
CURBS
PERFORATED STEEL CEILING DIFFUSERS
Perforated Diffusers – Supply
VARIABLE SPEED
DRIVES & STARTERS
PDC Series
Individually
Adjustable
Curved Blades
MODELc/wPDC
TEE-BAR
LAY-IN
SUPPLY
• All steel construction with a white (B12) powder coat finish
Productin Information
• Flush mounting
24 x 24 lay-in tee-bar ceilings
• Approved
for use in fire rated ceilings
Models
Adjustable Curved Blades
• Hinged, removable perforated face
• One piece plenum with one inch integrally drawn inlet collar
• Matching Model PDDR returns in stock
Diffusers
– Return
Perforated
• Optional
control damper.
See page 30.
MODEL PDC SUPPLY
ROUND NECK
Perforated Diffusers – Return
PDDR / PDDRE Series
C-60
Available Module Sizes
Metric
300 x 300
600 x 300
400 x 400
500 x 500
600 x 600
1200 x 600
160
$66
12
550
$73
14
675
$80
875
$85
Nominal
CFM*
Neck Size
Drop (Extended) Face
Type 3 Only
Price Each
130
240
10
375
12
525
$49
14
700
$49
16
800
$65
CEILING DIFFUSERS
6
8
$49
$49
$49
MODEL PDDR RETURN
SQUARE NECK
Neck
Size
Panel
Size
Nominal
CFM*
Price
Each
22 x 22
24 x 24
2200
$46
425
$39
Drop (Extended) Face
Panel Detail
10 x 10
12 x 12
Product Selection Checklist
1] Select Inlet Diameter or Neck Size L x W based on desired performance characteristics.
2] Select Face Size based on ceiling module.
3] Select Outlet Type by model number (material, flush or drop face).
4] Select Border Style according to installation requirements (page C74).
5] Select Volume Control Accessories, if desired (page C181-C186).
© Copyright
Price Industries Limited 2014.
All Metric dimensions ( ) are soft conversion.
6] Select
Finish.
Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Example: 8 in. / 24 in. x 24 in. / PDDR / 3 / B12
Application Recommendations:
For Border recommendations, see page C32.
*Nominal CFM based on a sound level of approximately NC 30. For more specific performance
information, consult your Hoffman & Hoffman representative or visit www.price-hvac.com
Prices subject to change without notice. All shipments are FOB Hoffman
Warehouse, freight prepaid and added to invoice.
All Metric dimensions ( ) are soft conversion.
C-72
$73
MODEL PDDR RETURN
ROUND NECK
12 x 12
24x12
16x16
20x20
24x24
48x24
1] Select Inlet Diameter
based
300 x 300 or Neck
600 xSize
300L x W400
x 400on desired
500 x performance
500
600 x characteristics.
600
1200 x 600
2]
Select
Face
Size
based
on
ceiling
module.
D Square Duct
3] Select Outlet Type by model number (material, flush or drop face).
6 x 64] [152
x 152]
according
requirements.
Select
Border Style
to installation
8 x 85] [203
x 203]
Select
Air Pattern Option (1, 2, 2C, 3 or 4 way).
10 x 10
[254
x 254]
PDDR
6] Model
Select
Volume Control Accessories, if desired.
12 x 12
[305
x 305]
plenum
7] For
Select
Finish.return (non-ducted) applications
14 x 14 [356 x 356]
8 in. / 24 in. x 24 in. / PDC / 3 / 4 / B12
15Example:
x 15 [381 x 381]
6 x 18 [152 x 457]
16Allx 16
[400
x 400] ( ) are soft conversion.
Price Industries Limited 2014.
© Copyright
Metric
dimensions
18Imperial
x 18 [457
x 457] are converted to metric and rounded to the nearest millimeter.
dimensions
$66
390
16
Module Checklist
Product Ceiling
Selection
275
Type 4
Concealed Spline
Dimensional Data — Imperial (in.) / Metric [mm]
D Round Duct
6 in. [152]
8 in. [203]
10 in. [254]
12 in. [305]
14 in. [356]
15 in. [381]
16 in. [406]
18 in. [457]
* Indicates units for plenum return (non-ducted) application.
8
10
Imperial dimensions are converted to metric and rounded to the nearest millimeter.
© Copyright Price Industries Limited 2014.
C-73
STEAM SPECIALTIES
Finish
White Powder Coat
B12
For optional and special finishes see color
matrix.
6
VIBRATION ISOLATION
Imperial
12 in. x 12 in.
24 in. x 12 in.
16 in. x 16 in.
20 in. x 20 in.
24 in. x 24 in.
48 in. x 24 in.
Price Each
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
t $IPJDF PG DPME SPMMFE TUFFM 1%%3 PDDRE) or aluminum face screen
(APDDR / APDDRE) construction, both
with steel backpan or frame.
t )JOHFE SFNPWBCMFQFSGPSBUFEGBDFQMBUF
with quick-release spring latches.
t $IPJDFPGmWFGSBNFTUZMFT
t $PNQMFUF SBOHF PG BWBJMBCMF BDDFTTPSZ
dampers, equalizing grids etc.
t -JHIU TIJFME PQUJPO -4 BWBJMBCMF PO
plenum return units (PDDR/APPDR).
t 0QUJPOBMCFBEFEFYUFOEFEOFDL 1/2 in.
tall) for easy flex duct connection (BN).
Nominal
CFM*
SPIRAL PIPE
& ACCESSORIES
or aluminum face screen (APDC /
ModelsAPDCE) construction. Steel backpan and
pattern controllers in both cases.
Matching Return for Models PDN
t 'JWF BJS QBUUFSO PQUJPOT BSF BWBJMBCMF
and PDF
from 1 to 4 way.
Frame Selection
Flush Face
t )JOHFE SFNPWBCMF QFSGPSBUFE
Steel Construction
PDDRGBDF
screenFace
with Screen
quick-release spring
latches.
w/ Aluminum
APDDR
Type 3
17
Dimensional Data — Imperial (in.) / Type
Metric [mm]
*OEJWJEVBMMZFace
QJWPUJOH DVSWFE CMBEFT BSF
Drop t(Extended)
Inverted T-bar Lay-in
Lay-in Narrow Member 9/16 in.[14]
located at the inlet neck and
are field
A = 1 in. [25] or 9/16Neck
in.[14]
Steel Construction
PDDRE
Size
Ceiling Module Size, Nominal
adjustable
horizontalAPDDRE
to vertical air
w/ Aluminum
Facefrom
Screen
Nominal
12 x 12
16x16
24x24
pattern.
Price PDDR
/ PDDRE Series perforated
[305 x 305] [406 x 406] [610 x 610]
face treturn
ceiling
areBOE
$IPJDFair
PG mWF
GSBNFdiffusers
TUZMFT 1%$&
6 x 6 [152 x 152]
designed
to match
airin
models
APDCE
are supply
available
FramePDN
Style 3
8 x 8 [203 x 203]
and PDFonly).
in appearance and detail, except
10
x
10
[254
x
254]
that air pattern controllers are not required.
t $PNQMFUF SBOHF PG BWBJMBCMF BDDFTTPSZ
12 x 12 [305 x 305]
The PDDR series is offered in two versions
dampers,
equalizing
gridsfor
etc.
14 x 14 [356 x 356]
— one for
ducted return
and one
plenum
Model PDDR –
Model PDDR – Maximum Square
1
15
x
15
[381
x
381]
return
t
0QUJPOBMCFBEFEFYUFOEFEOFDL
2
/
in.
return applications. For ducted return air
Round Duct Connection
Neck for plenum
16 x 16 [406 x 406]
tall) for PDDR
easy flex
duct connection
(BN).
applications,
features
the same
Available only in 12 x 12, 24 x 12,
18 x 18 [457 x 457]
backpan
as the supply air models, providing
24 x 24 ceiling modules.
Application
a connection to a flexible or rigid round
6 in. [152] Dia.
t
1%$
EJGGVTFST
BSF
EFTJHOFE
GPS
TQBDFT
duct, or to a square or rectangular duct. For
8 in. [203] Dia.
requiring
low noiseapplications,
and air pattern
plenum return
(non-ducted)
a
Type 2
Type 1
10 in. [254] Dia.
Snap-In
Surface Mount
adjustment
from horizontal
special frame
assembly
results in to
anvertical.
inlet
12 in. [305] Dia.
2 in. [51]
under module size for maximum
14 in. [356] Dia.
Finish
free area. The drop (extended) face Model
15 in. [381] Dia.
White
Powder Coat
PDDRE
is available
to complement theB12
16 in. [406] Dia.
supplyFor
air optional
models PDNE,
PDCE and
PDFEsee
and special
finishes
18 in. [457] Dia.
for tegular
ceilings.
color tile
matrix.
Features
Neck Size
FLEXIBLE DUCT /
SNAPLOCK & ACC.
CEILING DIFFUSERS
Information
Product
t $IPJDFPGDPMESPMMFETUFFM 1%$1%$& PDC - Frame Style 3
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
CEILING DIFFUSERS
PDDR / PDDRE Series
VAV TERMINALS /
HOT WATER COILS
Steel Construction
PDC
w/ Aluminum Face
APDC
Drop (Extended) Face
Steel Construction
PDCE
w/ Aluminum Face
APDCE
Price PDC / PDCE Series perforated
face ceiling diffusers feature individually
adjustable curved blades at the diffuser inlet,
available in fixed 1, 2, 2 way corner, 3 and
4 way air patterns. The adjustable curved
blades provide total flexibility in pattern
adjustment from horizontal to vertical,
as well as low pressure loss and noise
levels. Quick-release latches on the hinged
perforated face screen allow easy access
for field adjustment of the blades. The drop
(extended) face Model PDCE is available to
complement tegular tile ceilings.
Features
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Four-way,
pattern controllers
Flushadjustable
Face
Louvered Face Directional Diffuse
SMD / AMD Series
LOUVER FACED CEILING DIFFUSERS
MODEL SMD-TB TEE-BAR LAY-IN
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
32
and
Panel
Selection
• All steel construction with Frame
a white (B12)
powder
coat finish
• Flush mounting in 24 x 24 lay-in tee-bar ceiling
• Four-way pattern cores with Type
miter-cut
3P corners
Steel Frame and Panel
Type 3PA
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Spring-loaded snap-out core
Aluminum Frame and Panel (AMD/AMDA only)
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
• Optional snap-in opposed
blade damper
Neck Size
Nominal CFM*
SMD-D-TB
(with damper)
Price Each
SMD-TB
(less damper)
Price Each
9x9
400
$87
$73
12 x 12
600
$107
$91
18 x 18
1200
$131
$111
Frame and Panel SelectionMODEL SMD SURFACE MOUNT
• All steel construction with a white (B12) powder coat finish
SPIRAL PIPE
& ACCESSORIES
• Surface mounting
Type 6
•
Note: Extruded Aluminum Frame
Drop
Face
Frame
Surface
Mount
– Bevelled
Four-way pattern cores with miter-cut corners
3½"
• (89)Spring-loaded
snap-out core
The SMD is available with two drop face
frame styles - Type 5 Drop Face Surface
• Optional snap-in opposed Mount andType 5TB Drop FaceT-bar Mount.
blade damper
Both frame styles have a 2 1/2 in. (63.5mm)
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
VIBRATION ISOLATION
CEILING DIFFUSERS
SMD-D-TB
SMD-TB
Neck Size
Nominal CFM*
(with damper)
(less damper)
Type 17P Steel Frame and Panel
Price Each
Price Each
Type 17PA
Aluminum Frame and Panel (AMD/AMDA only)
$130
$110
15 x 15
900
Fram
Alum
Louvered Face Directional Diffusers
SMD
/ SMDA $73
/ AMDA $65
Series
6 x 6/ AMD 200
Type 1
Surface Mount
STEAM SPECIALTIES
Type 4
Type 4
(146)
Neck Size
Nominal CFM*
SMD-D
(with damper)
Price Each
Type 36
6 xInverted
6
200
$56
Lay-in
T-bar 1
in. [25] Full Face
(Module = Neck + 6 in.)
9x9
400
$70
12 x 12
600
$90
SMD
(less damper)
Price Each
$48
$56
$73
drop face as standard or a 4 in. drop face
as an option.
The drop face feature reduces ceiling
smudging, making it ideal for high traffic
commercial buildings such as big box retail
outlets.
Note:
Type 5 - available in square and rectangular
SMD-D
core
Neckstyles.
Size
Nominal CFM*
(with damper)
Price Each
Type 5TB,
Type 17
1815in.x18
in square
x 15 in. neck - available
900
$111core
Fineline
styles 1S, 2S, 2G, 3A and 4A only.
x 18 in. neck -1200
$139 4A
4218in.x42
available in square
core only.
*Performance based on a sound level of approximately NC 30. For more specific performance
information, consult your Hoffman & Hoffman representative or visit www.price-hvac.com
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
146
SMDType 5 /Type 5TB Modular
SMD
(less damper)
Price Each
T y p$91
e 5
Available Size - Type 5 – Imperial
$113
Square Neck Round Neck
6x6
4, 5, 6
9x9
6, 7, 8, 9
12 x 12
6, 7, 8, 9, 10, 12
15 x 15
8, 10, 12, 14, 15
18 x 18
8, 10, 12, 14, 15, 16
21 x 21
12, 14, 15, 16, 18, 2
24 x 24
12, 14, 15, 16, 18, 2
Available Size - Type 5TB – Imperia
Ceiling Module
Square N
24 x 24
18 x 1
33
• Flush mounting in lay-in tee-bar ceilings
• Optional control damper. See page 30.
• Center buttoned opening for damper adjustment
Frame Selection
• Optional cosmetic center cone
Full Face
Panel Size Nominal CFM*
Price Each
24 x 24
250
$76
8
24 x 24
400
$76
10
24 x 24
575Type 31
12
24 x 24
775
$76
14
24 x 24
975
$76
6
12 x 12
235
$53
12 x 12
350
24 x 24
Type 31
T-bar
A = 1" [25]
Type 2
Dimensional Data — Imperial (in.) / Metric [mm]
Type 4 Spline
Type 2 Snap-In
Duct Size
6, 8, 10, 12, 14, 15
6, 8, 10
4, 5, 6, 7, 8
Ceiling Module
Imperial
Metric
Ceiling
Opening
B
C
Duct Size
$53
24 x 24
600 x 600
22 x 22
21/2
[559 x 559] [64]
6, 8, 10, 12, 14, 15
11/16
[27] [152, 203, 254, 305, 356, 381]
$16
20 x 20
500 x 500
18 x 18
21/2
[457 x 457] [64]
[13]
6, 8, 10
[152, 203, 254]
1
/2
1
1
4, 5, 6, 7, 8
12 x 12 300 x 300 10 10
$17
Type 2 Snap-In
Type 4 Spline
[267x267] [29]
[27]
[102, 127, 152, 178, 203]
Duct
for Member
Ceiling Module SizesType
24 x 244TS
/ 600 xclip-on
600,
–– Size
$14Type 17 Frames
Narrow
recessed
152, 203, 254, 305, 356, 381
152, 203, 254
102, 127, 152, 178, 203
1
/2 x
1
/2
1
/8
1
/16
20 x 20 / 500 x 500, 12 x 12 / 300 x 300
spline (for Techstyle ceiling)
Sizes 20 x 20 / 500 x 500 only available in Type 31 Surface Mount
and Type 31 T-bar.
ASCD available in Type 17 & 31 only.
4TS available only on 24x24 SCD.
Neck Size
Panel Size
8
$70[25]
24 x 24Type 3P T-bar
250
A = 1 in.
$70
24 x 24
375
10
24 x 24
545
$70
12
24 x 24
725
$70
14
24 x 24
950
$70
6
Type 2P Snap-In
Type 2P
Snap-In
Nominal CFM* Price Each
6
Face
8
Type 3P
View
12 x 12
235
T-bar
A = 1" [25]
12
x 12 Only) 350
(Steel
$53
$53
$16
12 x 12Type 17P Narrow Member
AFI (R6) Insulation Blanket
24 x 24
$17
*Performance based on a sound level of approximately NC 30. For more specific performance
information,
consult your Hoffman & Hoffman representative or visit www.price-hvac.com
Face
Prices
subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
View
Type 4P
Spline
C-10
Type 17P
Dimensional Data — Imperial (in.)
Diffuser Size
Narrow Member
B
Snap
Splin
Dimensional Data —
Diffuser Size
Imperial
Metr
STEAM SPECIALTIES
SplineBlanket
Type
AFI (R6)4P
Insulation
Type 4P
VIBRATION ISOLATION
mes for Ceiling Module
Sizes 24 xonly
24 / 600
x 600, SPD.
4TS available
on 24x24
x 20 / 500 x 500, 12 x 12 / 300 x 300
es 20 x 20 / 500 x 500 only available in Type 31 Surface Mount
d Type 31 T-bar. Panel Mount - SPD (Steel Only)
CD available in Type 17 & 31 only.
S available only on 24x24 SCD.
DAS available in type 31 only. 20 x 20 (500 x 500) size not
ailable
Type 2P
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
• Satisfies both architectural appeal and engineering performance criteria
(Steel Only)
Narro
MODEL SPD TEE-BAR LAY-IN
11/16
6, 8, 10, 12, 14, 15
600 x 600 22 x 22
21/2
Frames
for [64]
Ceiling [27]
Module
24305,
x 24
600
x 600,
[559 x 559]
[152, Sizes
203, 254,
356,
•/ 381]
All steel
construction with a white
(B12) powder coat finish
SCDAS available in type 31 only. 20 x 20 (500 x 500) size not
20 x 20 / 5001 x 500,1 12 x 12 / 300 x 300
/2
500 x 500 18 x 18
2 /2
6, 8, 10
available
Sizes
x 20[64]
/ 500 x 500
Type•31Flush
Surface
Mount
mounting
in lay-inMember
tee-bar ceilingsType 4TS clip-on recessed
[457 20
x 457]
[13] only available
[152, 203,in254]
Type
17 Narrow
and1Type1 31 T-bar.
1
1
spline (for Techstyle ceiling)
300 x 300 10 /2 x 10 /2
1 /8
1 /16
4, 5, 6, 7, 8
•x 500)
Facesize
panel
is easily installed and
removed
without (Steel
specialOnly)
tools
Mount
- SCD
Panel
SPDAS
available
in
type
31
only.
20
x
20
(500
not
[267x267] [29]
[27]
[102, 127, 152, 178, 203]
available.
anel Mount - SCD
Type 17
Snap-
SPIRAL PIPE
& ACCESSORIES
CEILING DIFFUSERS
Dimensional Data — Metric [mm]
Ceiling Module
Ceiling Opening
B
Center Cone
600 x 600
559 x 559
64
mensional Data — Imperial
/ Metric [mm] 457 x 457
500(in.)
x 500
64
Ceiling Module
Ceiling
300 x 300
267 x 267
29
perial
Metric
Opening
B
C
Duct Size
$76 Mount
Surface
FLEXIBLE DUCT /
SNAPLOCK & ACC.
AFI (R6) Insulation Blanket
12
B
1
/2
x 2212
1
/2
11/8
Surfa
A = 1 in. [25]
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
6
Dimensional Data — Imperial (in.)
8
Ceiling Opening
Ceiling Module
24 x 24
22 x 22
AFI20(R6)
Insulation
Blanket
x 20
18 x 18
12 x 12
101/2 x 101/2
Type 31 T-bar
VAV TERMINALS /
HOT WATER COILS
Neck Size
Type 31
Type 31 Surface Mount
CEILING DIFFUSERS
FullFace
ull Face
12 x 12
• Four-way pattern, removable cones
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Frame Selection
ame Selection
20 x 20
VARIABLE SPEED
DRIVES & STARTERS
MODEL SCD TEE-BAR LAY-IN
Square Plaque Diffusers
Square Cone Diffusers
• All steel construction with a white (B12) powder coat finish
SPD / SPD AS / ASPD Series
SCD / SCD AS / ASCD Series
Square Cone Diffusers
CD / SCD AS / ASCD Series
24 x 24
FANS / DAMPERS /
CURBS
LOUVER FACED CEILING DIFFUSERS
24 x 24
600 x
12 x 12
300 x
All Metric dimensions ( ) are soft conversion.
Imperial dimensions are converted to metric and rounded
Duct Size
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
34
Ceiling Diffusers
Accessories
MISCELLANEOUS AIR DISTRIBUTION PRODUCTS
MODEL
SPF MOUNTING
FRAME
Surface
Mounting
Accessories
• Allows easy installation of lay-in diffusers in plaster or gypsum ceilings
• Steel construction with a white (B12) powder coat finish
AMF - Aluminum Surface Mount Adaptor Fra
SPF - Steel Surface Mount Adaptor Frame
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• All necessary mounting hardware
Eggcrate Face Return
80 / 81 / 82 Series
ProductMODEL
Information
ATG DOOR GRILLE
Extruded
aluminum
construction with 70° blades
PR - Plaster •
Ring
for Round
Diffusers
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
VIBRATION ISOLATION
$39
24 x 12
$43
80SR
sides
for door
• Fits doors or partitions as thin as 1-3/8 inch
with high free area and low sound and
Aluminum (B15) powder
pressure•drops.
coat finish
size restricted exhaust
Size applications.Nominal CFM*
Price Each
$87
12 x 12
250
Construction
1
x 1x/2 12
in. [13mm x 13mm 350
80
/2 in. x 1/2 in.18
$99
Specify model
PR
ring forgrid
round
outer
x 13mm]
aluminum
core.diffusers with standard out
1
$139
18 [13mm x 13mm 500
81
/2 in. x 1/2 in.18
x 1x in.
Finish:
Black.grid core.
and closex fit.
25mm]
aluminum
$223
24 x 24
700
82
80
x 25mm] aluminum grid core.
T-bar Lay-in
Price offers a variety of plaster rings to suit m
Duct rings are used for exposed duct mounti
neck diffusers and other similar applications.
are generally installed before the application
assist in framing the ceiling opening. Finish:
CCSQ - Mounting Panel for Square Ceiling Diffusers
VCS3 coated
steel opposed blade damperDimensional
or VCS3AL Data - Imperial (in.) / Metric [mm]
aluminum opposed blade damper.
Module Size
A
B
Mounting
/ Finish Options
• Aluminum
“egg crate”12type
1/2 inch
cube core for surface
x 12
25 3/16" [640] 13 5/16" [338]
Border Style
1" (25)
• Includes opposed blade
37 3/16" [945] 25 5/16" [643]
24 xdamper
24
Surface Mount
in. [32mm]
(Standard)
Fanti-smudge frame for
•111/4White
(B12)Flat
powder
coat
finish
Special
1 /4 in. [32mm] Curved
C
square
diffusers, the Price CCSQ
1 in. [25mm] Narrow
N
neatly drops the diffusers 11/16
Lay-in
in. [27] below
the ceiling to
Size Inverted
Nominal
CFM*
Price Each
80
1 in. [25mm]
T
TB
enhance
the ceiling effect and
9
/16 in. [14mm] Fineline
17
Surface
Mount as
reduce
smudging.
Finish:
5
/16 in. [8mm] Channel
CH
x6
225 specified.
$40
Core6Only
CORE
11/2" (38)
15
†
Exposed
Duct
/
in.
[24mm]
ED
16
8x8
400
$43
MODEL 80D CUBE CORE REGISTER
STEAM SPECIALTIES
12 x 12
DRF / DPR - Duct Ring Flange /
Duct Plaster Ring for Round Neck Diffusers
Eggcrate
FaceofReturn
• Inverted vee blades
prevent clear
line
sight
8 0 / 81 / 82
Grille
Register with integrated plenum
• Finished on both
Application
Price Each
24 x 24
$49
For surface mounting square ceiling diffusers
ceiling. This allows retrofit of Lay-in diffusers
of flexible duct in surface mount applications
extruded aluminum for crisp, clean lines. Ass
and close fit. Finish: B12 white.
For surface mounting square ceiling diffusers in drywall ceiling.
This allows retrofit of Lay-in diffusers or installation of flexible
duct in surface mount applications. Constructed of heavy
gauge steel. Assures a neat job and close fit. Finish: B12 white.
Models
Size
15/16" (24)
SB - Sectorizing Baffle
Ceiling Module Size
Nominal Duct Size
mounting
1" (25)
11/4"
(32)
Grille Face Opening = D -13/16" (21)
Grille Face Overall = D + 111/16" (43)
F Border
T-Bar Lay-In
Nominal Duct Size
The sectorizing baffle is a field installed acce
blank-off a portion of the inlet to create a spe
pattern. Baffles
are available in multiples of
Opposed
Optional
Damper
SPD, SCD,
RCD, RCDE and RCDA diffusers.
Damper
1" (25)
Panel Mounted
TBP
10 x 10
650
$51
916Optional
Clip Mounting Frame
1/4" (6)
F Border
9
16 in.
For flat
x 12ceiling T grid
900
C Border
For F /12
Border
D $59
Surface Mount
11/4"
Grille Face Opening = D -13/16" (21)
(32)
Fastening
11
Grille Face Overall = D + 1 /16" (43)
14 x 14
1150
$76
Countersunk screwholes
A
A steel panel shall be provided when ceiling module is greater than
c/w oval-head screws
2 in. [51] over duct size.
*Performance based on a sound level of approximately NC 30. For more specific performance information, consult
No screwholes
Ø
Available Sizes
your Hoffman & Hoffman representative or visit www.price-hvac.com
Minimum
Maximum
*
Finish
6
in.
x
4
in.
96
in.
x
48
in.
Prices subject to change without notice. All shipments are
Hoffman
Warehouse,
freight
prepaid
and
added
to
invoice.
FOB
in. [1219mm x 609mm] provided with
White Powder Coat
B12
[152 x 102]
[2438 x 1219]
mullion(s).
For optional and special finishes see color
15
Increases
matrix. corner size to /16 in. flat ceiling T equivalent.
* One-piece frame
Use†when
frame style 916, 916P is not available.
Four clips
in. [1219mm
x 2438mm] supplied in
Note the reduced core area of ED Border
sections complete with mounting
required per diffuser. Supplied in boxes of 100.
Application
with high free area and low sound and
pressure drops.
35
FANS / DAMPERS /
CURBS
size restricted exhaust applications.
MISCELLANEOUS AIRCurved
DISTRIBUTION
PRODUCTS
Vane Diffusers
Construction
1
/2 in. x 1/2 in. x 1/2 in. [13mm x 13mm
80
x 13mm] aluminum grid core.
1
81
/2 in. x 1/2 in. x 1 in. [13mm x 13mm
x 25mm] aluminum grid core.
82
• Aluminum
“eggInformation
crate”80
type 1/2 in.
Product
x 25mm] aluminum grid core.
T-bar Lay-in
CVD, SCVD, ACVD Series
VARIABLE SPEED
DRIVES & STARTERS
MODEL 80 CUBE CORE RETURN GRILLE
cube core for tee-bar lay-in ceilings
CVD
SCVD
ACVD
Price CVD/SCVD/ACVD Series
curved vane directional diffusers feature
individually adjustable curved vanes to
Border
NeckStyle
Size
Panel Size
Nominal
CFM*
Price
Each
direct supply
air precisely
to suit
the desired
application. A clean, functional appearance
Surface Mount
with excellent performance characteristics,
11/4 in. [32mm] Flat (Standard) the CVD/SCVD/ACVD
F
can be installed in
24 x 12
1500
$46
ceiling
or sidewall locations,
and provides
122 x 10
1 /4 in. [32mm] Curved
C
a wide range of application versatility.
22
24 x 24
2700N
$79
1 22
in.x [25mm]
Narrow
Features
Nominal Duct Size
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Aluminum Construction
steel opposed blade damper orExtruded
VCS3AL
Formed Steel Construction
aluminum opposed blade damper.
Formed Aluminum Construction
Ceiling Module Size
Model CVD
Shown
Mounting / Finish Options
1" (25)
11/4"
(32)
Grille Face Opening = D -13/16" (21)
Nominal Duct Size
MODEL SCVD SUPPLY REGISTERS
1" (25)
VCS3 Damper
Optional Mounting Frame • All steel
20 in. [508] for strength and 1/4" (6)
exceed
construction
F Border
stability.
C Border
For F Border
D
Surface Mount
11/4"
Grille Face Opening = D -13/16" (21)
• Curved
blades and opposed blade damper
Finish
(32)
Fastening
White Powder Coat
B12
Grille Face Overall = D + 111/16" (43)
coat finish
optional
and special
finishesAsee
Countersunk screwholes • WhiteFor(B12)
Apowder
steel panel shall be provided when ceiling module is greater than
color matrix.
c/w oval-head screws
2 in. [51] over duct size.
No screwholes
Ø
Available Sizes
Minimum
Maximum
*
Nominal
Nominal
Finish
Size
Price Each
Size
Price Each
CFM*
CFM*
Product Selection
Checklist
6 in. x 4 in.
96 in. x 48 in.
in. [1219mm x 609mm] provided with
White Powder Coat
B12
1] Select Inlet Size L x W based on desired
[152
x
102]
[2438 x 1219]
performance characteristics.
mullion(s).
For6 optional
and
color
x6
130 special $56ishes see
10
10 Face Size based
350 on
$71
2] x
Select
ceiling
Application
Surface
Mount
module (n/a type C or F).
A = / in. [19]
CVD
matrix.
* One-piece frame
3] Select Outlet Type by model number.
x 8Blade Spacing
225
12
x 12
450 in.according
$57
$80
A = 1 in. [25]
/ in. 8[19]
4] Select Border / Panel Style
to
[1219mm
xSCVD
2438mm]
supplied in
ACVD
A = 1 in. [25]
† Note the reduced core area of ED Border
installation requirements (page C134).
5] Select Core Style basedsections
on application. complete
with mounting
per dimensioned details (D88). Corrections
6] Select Volume Control Accessories, if
channel(s).
desired (pages C181-C186).
for performance data are included
in the
7] Select
Fastening Desired (type C or F
only).
performance notes.
8] Select Finish.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
mper
Optional
CVD / SCVD / ACVD Series
Damper
11/2" (38)
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
ies
F Border
T-Bar Lay-In
Grille Face Overall = D + 111/16" (43)
VAV TERMINALS /
HOT WATER COILS
Lay-in
46 x 22
48 x 24
4000
$172
roll-formed aluminum or roll-formed
80
1 in. [25mm] Inverted T
TB
steel construction.
9
/16 in. [14mm] Fineline
17
Surface Mount
control.
5
/16 in. [8mm] Channel
CH
from the grille face.
Core Only
CORE
15
ED †
Exposed Duct /16 in. [24mm]
• Surface Mount
15/16" (24)
painted oval head screws are supplied
Panel Mounted
• Four-way
register
(Typeceiling
CTBP
and F supply
only).
1" (25)
CEILING DIFFUSERS
• VCS3
WhiteModels
(B12)
powder coat finish
coated
C urved V ane
3
3
4
4
SPIRAL PIPE
& ACCESSORIES
Single Deflection
MODEL 540 SUPPLY GRILLES
•
•
•
•
•
Product Selection Checklist Full Face Lay-in Application
Surface Mount
Unit Size based on desired performance characteristics.
Economical steel construction
Outlet Type by model number (core style, damper).
3] Select Border Style according
(F Each
is standard).
Single deflection
Sizeto installation
Nominalrequirements
CFM*
Price
4] Select Module Size if TB border is selected. (Note: maximum duct size = module size-2 in. [
Type Lay-in (Steel Panel) Application
Multi-shutter
damperMounting Frame if Panel
5] Select
desired.
x4
375TB border). $26
6] Select Fastening Type (A is10
standard,
n/a with
White (B12)
powder coat finish
7] Select Finish.
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Example:
24 in.x 24 in. / CVD / C / 2S / A / B12
Application Recommendations:
1] Select
For Border and Panel recommendations,
see page C90.
2] Select
12 x 4
415
$29
12 x 6
550
$32
C-149
All Metric dimensions ( ) are soft conversion.
12 x 8
700
Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Optional "G"
Fastening
*Performance
14 x 8
800
$37
16 x 8
900
$39
based on a sound level ofBorder
approximately NC 30. For more specific performance information, consult
your Hoffman & Hoffman representative or visit www.price-hvac.com
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
$36
STEAM SPECIALTIES
GRILLES AND REGISTERS
© Copyright Price Industries 2014.
VIBRATION ISOLATION
All Metric dimensions ( ) are soft conversion.
Example: 24 in. x 24 Imperial
in. / 80
/ F / A / B12
Application Recommendations:
dimensions are converted to metric and rounded to the nearest millimeter.
24 in. x 24 in. / 80 /TB / B12
10 x 6
500
$31 F Border, A Fastening.
T-bar Lay-in – TB Border, Fastening n/a
© Copyright Price Industries Limited 2014.
D-3
Product Information
Models
VNJOVN
m core
humidity
Type 3
Frame Selection
F(SW)
F (LI)
D
1] Select Ceiling Panel Size based on ceiling module.
Selection
Checklist
Product
2] Select
Outlet Type
by model number.
Neck Size
Overall Face Size
3] Select Finish.
1] Select Ceiling Panel Size based on ceiling module.
x 24number.
in. / PFRF / B12
2] SelectExample:
Outlet Type24
byin.
model
3] Select Finish.
7 11/16 x 7 11/16
Example: 24 in. x 24 in. / PFRF / B126 x 6
Performance Data – Plenum Return
Performance Data – Plenum Return
Module
Size
24 x 12
SPIRAL PIPE
& ACCESSORIES
12 x 12
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
24 x 12
24 x 24
Neg. Static Pressure
Velocity Pressure
Neck Velocity, fpm
200
Air Flow, cfm .008
Neg. Static Pressure
NC
Velocity Pressure
.002
.008
.002
300
168
.019
—
.006
.019
.006
400
252
.033
—
.010
.033
.010
500
336
.051
—
.016
Air Flow, cfm Air Flow, cfm 168
NC
NC
—
351
252
——
527
336
——
703
420
——
Air Flow, cfm Air Flow, cfm 351
NC
NC
—
735
527
——
1102
703
——
1469
878
—16
8x8
8 /16 x 8 /16
10 x.051
10
11
11
11
/16 x 11.101
/16
.074
12
.016
600
x 12
420
.074
—.022
14 x 14
878
504
1619
24 x 24
“Method of Testing for Rating the Performance of Air
© Copyright Price Industries Limited 2014.
Outlets and Inlets.”
Product Selection Checklist
11
.02211
13700
/16
504
.101
19
.031
11
11
x
.031
13 11800
/16
588
.132
23
.040
11
15 /16 x 15 /16
185
$39
275
$43
425
.132
.040
900
635
672
.167
26
.050
.167
.050
1000
756
.206
29
.062
830
1406
756
2829
1581
840
3132
2204
1230
2572
1406
2939
1581
29
31
1450
3306
1757
3333
20
18 x1718
11
26/28
192224
/16 x 19 11
16
1125
.062
$59
840
32
$71
1757
33
$80
3674
35
$90
2572
2939
3306
3674
26 4. NC values
29 are based on
33room absorption
35 of 10 dB re 10-12
Watts and one diffuser.
-12
indicate
and NCoflevel
4. NC values5.areBlanks
based (—)
on room
absorption
10 dBbelow
re 1015.
Watts and one diffuser.
3. All pressuresAllare
in
in.
w.g.
Metric dimensions ( ) are soft conversion.
5. toBlanks
(—) indicate
Imperial dimensions are converted to metric and rounded
the nearest
millimeter.and NC level below 15.
MODEL 630-TB ALUMINUM RETURN
MODEL 530-TB STEEL RETURN
C-77
C-77
• Tee-Bar Lay-In
• Available in steel or aluminum, white (B12) powder coat finish
• Fixed horizontal bars set at 45°
Panel Size
Nominal CFM*
Aluminum (B12)
Price Each
Steel
(B12)
Price Each
22 x 10
24 x 12
800
$51
$43
22 x 22
24 x 24
1600
$81
$63
24 x 48
2750
$166
$138
Neck Size
All Metric dimensions ( ) are soft conversion.
Imperial dimensions are converted to metric and rounded to the nearest millimeter.
$51
.206
2204
22
Copyright
Limited
2014.
1] ©Select
UnitPrice
SizeIndustries
based on
desired
performance characteristics. All Metric dimensions ( ) are soft conversion.
Imperial dimensions are converted to metric and rounded to the nearest millimeter.
2] Select Outlet Type by model number (core style).
3] Select Border Style according to installation requirements (F is standard).
4] Select Module Size if TB border is selected. (Note: maximum duct size = module size-2 in. [50]).
5] Select Mounting Frame if desired.
6] Select Fastening Type (A is standard, n/a with TB Border).
7] Select Finish.
Example: 24 in. x 12 in. / 10 / SW / A / B12
24 in. x 24 in. / 10A / TB /0/ B12
Application Recommendations:
Surface Mount – F Border, A Fastening.
T-bar Lay-in – LI Border, Fastening n/a
VIBRATION ISOLATION
Price Each
1230
672
2426
11
17 /16 x 17 /16
1837
1054
Nominal CFM*
1054
588
2023
11
16 x 16
Air Flow, cfm
735
1102
1469
1837
Performance Notes:
NC
— 70-2006 —2. Air flow is—
17
in cfm.
with ASHRAE Standard
1. Tested in accordance
“Method of Testing for Rating the Performance of Air
3. All pressures are in in. w.g.
Performance Notes:
Outlets and
Inlets.”
2. Air flow is in cfm.
with
ASHRAE Standard 70-2006
1. Tested in accordance
© Copyright Price Industries 2014.
22 x 46
STEAM SPECIALTIES
$29
MODEL 10A SURFACE MOUNT RETURN
Ø
PO TFF
2550
•
•
Product Selection Checklist
• Surface mounting
12 x 12
um*
Type
24
x 243
$20
Imperial
Metric
12 in. x 12 in.
300 x 300
Imperial
24 in. x 12Metric
in.
600 x 300
12 in. x 1224
in.in. x 24
300
in.x 300600 x 600
Aluminum core construction24 in. x 12 in.
600 x 300
24 in. x 24 in.
600 x 600
White (B12) powder coat finish
Module
Size
24 in.
610]
Type 17
575
or
A
B12
ee color
Type 3
24 x 12
Price Each
or
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
see D45.
Type 17
Type 3
FLEXIBLE DUCT /
SNAPLOCK & ACC.
P BDDFOU
surface
Nominal CFM*
*Performance based on a sound level of approximately NC 30. For more specific performance information,
consult your Hoffman & Hoffman representative or visit www.price-hvac.com
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
CEILING DIFFUSERS
Panel Size
PS DMFBO ] centers
PFRFE / APFRFE
CEILING DIFFUSERS
XJUI DPSF
.
USVTJWFMZ
tions.
FESFUVSO
powder coat finish
PFRFE / APFRFE
Frame Selection
4034
10
10A
10SS
MODEL PFRF PERFORATED PANEL
t $IPJDFPGnBUPSESPQGBDFEFTJHO
t $IPJDFPGDPMESPMMFETUFFM
1'3'1'3'& or aluminum
panel ( APFRF/APFRFE).
t &DPOPNJDBM
IJHIDBQBDJUZSFUVSOPVUMFU
• Matches PDC/PDDR series diffusers
t $IPJDFPGnBUPSESPQGBDFEFTJHO
Finish
• Tee-Bar Lay-In
t &DPOPNJDBM
WhiteIJHIDBQBDJUZSFUVSOPVUMFU
Powder Coat
• B12
All steel construction
with a white (B12)
Finish For optional and special finishes see color
PFRF / APFRF
•
Turned-up
edges,
no
frame
White Powder
Coat
B12
matrix.
PFRF / APFRF
For optional
and special finishes see color
Face Return
Perforated
matrix.
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
ion
MISCELLANEOUS RETURN GRILLES
VAV TERMINALS /
HOT WATER COILS
e
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
36
Perforated Face Ceiling Panel
Models Steel Construction
PFRF
Steel
Construction,
extended face PFRFE
Perforated
Face
Ceiling Panel
Aluminum Construction
Steel Construction
PFRF APFRF
Aluminumextended
Construction,
Steel Construction,
face PFRFE
extended
face
Aluminum
Construction
APFRF APFRFE
Aluminum
Construction,
Price
PFRF / PFRFE / APFRF / APFRFE
panels are used
extended Series
face perforated ceiling
APFRFE
as non-ducted
return outlets
for T-bar LayPrice PFRF
/ PFRFE / APFRF
/ APFRFE
in ceilings.
Series perforated
ceiling panels are used
as non-ducted
return outlets for T-bar LayFeatures
in ceilings.
t $IPJDFPGDPMESPMMFETUFFM 1'3'1'3'& Features or aluminum panel ( APFRF/APFRFE).
ication
T-bar Lay-in Mount and Style 17:
12 in. x 12 in. [305 x 305]
24 in. 12 in. [610 x 305]
24 in. x 24 in. [610 x 610]
48 in. x 24 in. [1219 x 610]
37
T-bar Panel Mount (3P):
Panel size 24 in. x 24 in. [610x610]:
Min inlet 6 in. x 6 in. [152x152],
Max inlet 18 in. x 18 in. [457 x 45].
Panel Size 48 in. x 24 in. [1219x610]:
Min inlet size 6 in. x 6 in. [152x152],
Max inlet size 42 in. x 18 in. [1067 x 457].
FILTER GRILLES
10FF/10AFF/80FF available sizes
Surface Mount:
• Egg
crateTB
face
with 1/2” cube core design
10FF
Border
• 80% free area
• Aluminum grid with a white (B12) powder coat finish
Neck Size
Panel Size
Nominal CFM*
Price
with Filter
20 x 20
24 x 24
2400
$138
10FF SM Border
nting
/ Finish
Options
530FF
/ 535FF
– Steel
Louvered
Face Filter Return
630FF
/
635FF
– Aluminum
er Style
500FF
/
600FF
Series SM
Neck Size
Panel Size
ce Mount
530FF/535FF available sizes
80FF 17 Border
80FF 3P Border
n Inverted
1
in.
[25]
T
TB
TB
Border
3P
Surface Mount:
n panel
3P17
Min Size: 8 in. x 4 in. [203 x 102]
20 x 20
24 x 24
Max Size: 48 in. x 48 in. [1219 x 1219]
wOffered
Member
17
in
1
in.
increments
530FF
535FF – Steel
80FF
SM /Border
10FF SM Border
Mount
and Style–17:
h T-bar Lay-in
630FF
/ 635FF
Aluminum
12 in. x 12 in. [305 x 305]
e Powder
Coat
B12
24 in. 12 in.
[610 x 305]
available
sizes
24 in.530FF/535FF
x 24 in. [610
x 610]
3P
TB Border
ptional
special
Mount:
48 in.Surface
x and
24 in.
[1219
x 610]finishes see color
17
Min Size:
8 in.
x 4 in. [203 x 102]
x. T-bar Panel
• Extruded aluminum frame with a white (B12) powder coat finish
Mount
(3P):
Nominal CFM*
Price
with Filter
2000
$110
Max Size: 48 in. x 48 in. [1219 x 1219]
• 45° blades
• Hinged core and latches for easy filter cleaning
PanelSizes
size 24inin.
x 24
in. [610x610]:
Offered
1 in.
increments
able
Min inlet 6 in. x 6 in. [152x152],
T-bar Lay-in Mount and Style 17:
Max inlet 18 in. x 18 in. [457 x 457].
12 in. x 12 in. [305 x 305]
Panel24
Size
48in.
in.[610
x 24x 305]
in. [1219x610]:
Minimum
Maximum* 630FF
in. 12
Min inlet
in.[610
x 6xin.
[152x152],
Surface Mount
24 in.size
x 246in.
610]
48
in.
x
24
in.
[1219
x
610]
Max
inlet
size
42
in.
x
18
in.
8 in. x 4 in.
48[1067
in.xx457].
24 in.
T-bar
Panel
Mount
(3P):
630FF/635FF
available sizes [1219 x 610]
[203
xPanel
102]
sizeBorder
24 in. x 24 in. [610x610]:
80FF
17
80FF
Surface
Mount:
630FF
23/16”
Surface Mount
Nominal CFM*
Price
with Filter
12 x 12
123/8 x 123/8
575
$79
1400
$125
1000
$111
1800
$151
TB T-bar
MODEL 630FF-TB LAY-IN
D-53
All Metric dimensions ( ) are soft conversion.
Imperial dimensions are converted to metric and rounded to the nearest millimeter.
TB T-bar
23/16”
Product Selection Checklist
1”
23/16”
1] Select Unit Size based on desired performance
characteristics.
2] Select Outlet Type by model number (core style, material).
3] Select Border Style according to installation requirements.
4] Select Module Size if TB border is selected.
5] Select Finish.
TB Border 630 FF
Example: 24 in. x 24 in. / 80FF / SM / B12
24 in. x 24 in. / 10FF / TB / / B12
TB Border 630 FF
D-53
Dimensioning Schedule
Filter Size
A
1 in. [25]
specific
Neck Size
Panel Size
Nominal CFM*
Price
with Filter
20 x 20
24 x 24
1400
$133
20 x 44
24 x 48
3000
$229
B
23/16 in. [56]
33/16 in. [81]
*Performance based on a sound level of approximately NC 30. For more
2 in. [51]
2 in. A
Filter Size
B
performance information, consult your Hoffman & Hoffman representative
or visit 2www.price-hvac.com
/ in. [56]
1 in.
1 in. [25]
Dimensioning Schedule
1 in.
3
2 in.
2 in. [51]
16
33/16 in. [81]
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
All Metric dimensions ( ) are soft conversion.
© Copyright Price Industries 2014.
STEAM SPECIALTIES
ll Metric dimensions ( ) are soft conversion.
mperial dimensions are converted to metric and rounded to the nearest millimeter.
Similar to 630FF above but for tee-bar lay-in ceilings
Extruded aluminum frame with a white (B12) powder coat finish
45° blades
Hinged core and latches for easy filter change
Continuous frame without screw holes
VIBRATION ISOLATION
•
•
•
•
•
1”
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
GRILLES AND REGISTERS
Neck Size
1”
1] Select
Unit Size based on desired performance characteristics.
2] Select Outlet Type by model number (core style, 20
material).
x 20
203/8 x 203/8
3] Select Border Style according to installation requirements.
4] Select Module Size if TB border is selected.
24 x 12
243/8 x 123/8
5] Select Finish.
1”
23/16”
24 x 24
243/8 x 243/8
Example: 24 in. x 24 in. / 80FF / SM / B12
24 in. x 24 in. / 10FF / TB / / B12
12 in. x 12 in. [305 x 305]
Surface Mount:
24 in. 12 in. [610 x 305]
Size:
in. xx4610]
in. [203 x 102]
24 in.Min
x 24
in. 8[610
48 in. x 48 in. [1219 x 1219]
48 in.Max
x 24Size:
in. [1219
x 610]
Offered in 1 in. increments
48 in. 48 in. [1219 x 1219]
T-bar Lay-in Mount and Style 17:
12 in. x 12 in. [305 x 305]
24 in. 12 in. [610 x 305]
24 in. x 24 in. [610 x 610]
ight Price48
Industries
2014.
in. x 24 in. [1219 x 610]
48 in. 48 in. [1219 x 1219]
Filter Size
SPIRAL PIPE
& ACCESSORIES
Max inlet size 42 in. x 18 in. [1067 x 457].
T-bar Lay-in Mount and Style 17:
630FF/635FF available sizes
3P Border
Product Selection Checklist
Min inlet 6 in. x 6 in. [152x152],
Min Size:
8 in.18
x4
[203
x 102]
e-piece
Max inlet
in.in.
x 18
in. [457
x 457].
Max Size:
48xin.
x 1219]
Panel 48
Sizein.
48xin.
24 [1219
in. [1219x610]:
Minininlet
size
6 in. x 6 in. [152x152],
Offered
1 in.
increments
FLEXIBLE DUCT /
SNAPLOCK & ACC.
MODEL 630FF SURFACE MOUNT
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
GRILLES AND REGISTERS
• Perforated face for lay-in ceilings
• Steel construction with a white (B12) powder coat finish
• Hinged core and latches for easy cleaning
VAV TERMINALS /
HOT WATER COILS
MODEL 10FF PERFORATED FACE LAY-IN
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
GRILLES AND REGISTERS
MODEL 80FF CUBE CORE LAY-IN TEE-BAR
VARIABLE SPEED
DRIVES & STARTERS
Min Size: 8 in. x 4 in. [203 x 102]
Max Size: 48 in. x 24 in. [1219 x 610]
NFE TUFFM CPSEFST BOE NPVOUJOH
Offered in 1 in. increments
me (10FF/80FF).
T-bar
Lay-in
Mount and Style 17:
80FF
TB Border
SVEFE BMVNJOVN GSBNF BOE
12 in. x 12 in. [305 x 305]
minum perf (10AFF).
24 in. 12 in. [610 x 305]
'' $PSF 1/2 in. x 1/2 in. x1/2 in.
24 in. x 24 in. [610 x 610]
x 13 x 13] aluminum grid.
48 in. x 24 in. [1219 x 610]
3
FF Core: steel with /16 in. [5] holes on
T-bar Panel Mount (3P):
n. [6] centers staggered 60°.
Panel size 24 in. x 24 in. [610x610]:
SEFST BOE GSBNFT BSF PG BMMXFMEFE
Min inlet 6 in. x 6 in. [152x152],
nstruction with reinforced mitered
Max inlet 18 in. x 18 in. [457 x 45].
ners.
Panel Size 48 in. x 24 in. [1219x610]:
OHFUBCNFDIBOJTNBMMPXTIJOHJOHPS
Min
inletSM
sizeBorder
6 in. x 6 in. [152x152],
80FF
moval of grille from the filter frame for
Max inlet size 42 in. x 18 in. [1067 x 457].
Filter
Return
Louvered
Face
aning.
500FF
/ 600FF
/4 turn quickOHFE
POF TJEF
XJUI 1Series
10FF TB Border
80FF
TB Border
ease
fasteners.
Also avaliable with 1/4
n fasteners only.
re-Rated applications please see D40.
FANS / DAMPERS /
CURBS
FOEFE UP CF JODPSQPSBUFE JOUP B
nveniently serviceable air filtration
tem.
DFQUTTUBOEBSEJO<>PSJO<>
er media.
TJHOFE GPS SFDJSDVMBUJOH BJS TZTUFNT
ch as fan powered induction
minals, fan coils and heat pumps.
Eggcrate
80FFJO EFUBJM OTUSVDUFE Face
UP NBUDI
ries grilles (pages D39 and D42).
truction
Thermal actuators sense room air and
adjust air flow into the space to satisfy the
room load, requiring no wires for simple
installation and maintenance.
Standard Construction Features
38
FANS / DAMPERS /
CURBS
t 4UFFMCBDLQBO GBDFQMBUFBOEMJOLBHFGPS
strength and durability.
t 5IFSNBM FMFNFOUT GPS DPOTJTUFOU repeatable performance.
t )JOHFE GBDFQMBUF XJUI QPXFSGVM
magnetic closure ensures simple yet
strong closure that allows for quick
access to adjustment features.
t 4QFDJBMMZ FOHJOFFSFE EBNQFS TUBDL GPS
reduced linkage binding and superior
performance over the entire operating
®
range.
Standard Linkage and Control Features
®
t *OEJWJEVBM IFBUJOH BOE DPPMJOH TFU
points (Varitherm-HC only).
t .JOJNVNBJSnPXBEKVTUNFOU
t #BMBODJOHNPEFGPSFBTZTFUVQ
t "VUPNBUJD IFBUJOH DPPMJOH DIBOHFPWFS
(Varitherm-HC only).
t &OHJOFFSFEEBNQFSMJGUUSBDLGPSBNPSF
predictable linear performance and for
isolating the force of the damper on the
linkage for freer, smoother operation –
improving the response of the diffuser
to fluctuating room loads.
VARIABLE SPEED
DRIVES & STARTERS
VARITHERM MODEL VPD-HC
The Price Varitherm is a thermally powered self-modulating diffuser featuring a specialized linkage
design for optimal zone temperature control in a stand-alone package. The Varitherm® VPD-HC is
available for heating and cooling modes with an automatic heating/cooling changeover.
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Designed for tee bar lay-in ceilings
• Steel backpan, faceplate and linkage
for strength and durability
• Minimum airflow adjustment at diffuser
• Forced open made for system balancing
Accessories
t• 13$
o 1SFTTVSF
3FMJFG $PMMBS
Manual
temperature
setSFHVMBUFT
pointSpiral
adjustment
diffuser
DuctatGrille
static pressure at the Varitherm .
•
Hinged
plaque
with
powerful
magnetic
closure
SDG
Series
t 1$7o1SFTTVSF$POUSPM7BMWF
• White (B12) powder coat finish Dimensional Data — Imperial (in.)
Options
sers
).
E
E
VAV TERMINALS /
HOT WATER COILS
White Powder Coat
B12
For optional and special finishes see color
Model
matrix.
Spiral Duct Register
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
•
•
•
•
Min/Max Nominal
Pipe Size
CFM
WXH
10 x 4
8/24
250
8”
VPD-HCNominal Duct
152, 203, 254, 305
Price Each
Ceiling Module
6, 8,10,12
610 x 610
Nominal CFM* Noise Criteria
300
30
10”
400
Product Selection Checklist
12”
Price
Min/Max Nominal
W Split
X H Deflection
Air Pattern
available CFM
on
Each
Pipe Size
© Copyright Price Industries Limited 2014.
$99
Dimensional Data — Metric [mm]
Nominal Duct
$458
Steel Construction
SDG ST
Aluminum Construction
SDG AL
Galvanized Steel
SDG GV
Price SDG Spiral Duct Grilles were
specifically designed to be mounted on
round or spiral ducts without the use of
any transitions.
Gaskets Inlet
placedDiameter
at each
1] Select
based on desired performance characteristics.
end of the grille allow it to blend seamlessly
Type by model number.
with the duct.2]An Select
additionalDiffuser
gasket placed
3]provides
Select
Frame
Style according to installation requirements.
around the inlet
an air
seal between
the grille and4]
the Select
duct. TheOptions.
SDG series is
available in steel (SDG ST), galvanized
5] or
Select
Finish
(B12
steel (SDG GV)
aluminum
(SDG
AL) is standard).
construction. The grilles come in double
Example: 8" / VPD-HC / 3 / B12
deflection arrangement and feature precise,
high quality roll-formed blades and formed
frames. The galvanized steel model (SDG
Allinstalled
Metric dimensions
GV) can be
unpainted;( )itare
is soft
alsoconversion.
Imperial
are converted
an excellent
choicedimensions
for applications
where to metric and rounded to the nearest millimeter.
the grille needs to be field painted to match
duct finish.
Features
Surface mount
Model SDG is constructed of galvanized steel (mill finish)
Integral gasket seals grille tightly to duct
Built in extractor to allow accurate balancing
36 in./900 mm, 48 in./1200
in./120 mm and
units. t "WBJMBCMF
mm
1660x in./1500
6
14/24
500
10 x 6
14/24
350
$104
18 x 6
14/24
12 x 4
8/24
300
$101
18 x 8
20/24
14 x 6
14/24
450
$115
20 x 6
14/24
16 x 4
8/24
350
$114
20 x 8
20/24
20 x 4
8/24
450
$123
24 x 6
14/24
24 x 4
8/24
550
$139
24 x 8
20/24
500
30
$458
30
$458
Price
Each
C-201
JO FJUIFS TUFFM 4%( 45 $123
(SDG AL) construction.
t %PVCMFEFnFDUJPODPSFXJUIJOEJWJEVBMMZ
550
$129
blades are parallel to the short
dimension.
t 3/4 in. blade spacing.
t 0QFO DFMM GPBN HBTLFU BUUBDIFE UP
800
$134
600
$134
openings in the duct.
t $MPTFE DFMM GPBN FOE HBTLFU DPOGPSNT
to any duct diameter.
t 0QUJPOBMBJSTDPPQ "4 BWBJMBCMF
(VCS3).
Mounting / Finish Options
Fastening
Countersunk screw holes
A
Finish
White powder coat
B12
For optional and special finishes see color
matrix.
850
$140
700
$159
900
$166
Recommended SDG Size for Minimum Duct Diameter
Duct Size (in) Ø
8 in. - 13 in.
14 in. - 21 in.
22 in. - 31 in.
32 in. - 41 in.
42 in. - Over
Min. Nom. Width (in)
-4 in.
4 in.
4 in.
4 in.
Max. Nom. Width (in)
4 in.
6 in.
8 in.
10 in.
12 in.
MODEL TBDI475 SLOT DIFFUSERS
• Designed for tee bar lay-in ceilings
• Adjustable air pattern
with
3/4 in. slots
Product Selection
Checklist
controllers
• Internally insulated with neoprene coated fiberglass insulation
1] Select Unit Size based on desired performance characteristics.
2] Select Finish.
Example: 10 in. x 6 in. / SDG / GV
VIBRATION ISOLATION
ct
0
4
Inlet Size
24 x 24
Product Information
8"
© Copyright Price Industries 2014.
3 1/2"
Dimensional Data - Imperial (in.) / Metric [mm]
STEAM SPECIALTIES
PG
0
m.
B
l.
N
w
d
Ceiling Module
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
s
D
t 3*OTVMBUJPO
Finish
GRILLES AND REGISTERS
0
0
e
al
s.
or
®
MODEL SDG SPIRAL GRILLE
FLEXIBLE DUCT /
SNAPLOCK & ACC.
0
0
- Supply
SPIRAL PIPE
& ACCESSORIES
5
5
CEILING DIFFUSERS
MISCELLANEOUS AIR DISTRIBUTION PRODUCTS
All Metric dimensions ( ) are soft conversion.
Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Length
A Width
Inlet
# of Slots
Nominal CFM*
Price Each
24”
3 1/2”
8” flat oval
2
160
$111
48”
3 1/2”
8” flat oval
2
225
$149
48”
3 1/2”
10” flat oval
2
275
$149
Module
Model
Imperial Metric
Inlet Size
1 Slot
2 Slot
3 Slot
4 Slot
based
information,
*Performance
(in.)
[mm] on a sound
D level of approximately
H
W
H NC 30.
W ForH more
W specific
H performance
W
consult24
your Hoffman
&
Hoffman
representative
or
visit
www.price-hvac.com
3
1
1
7
600
6, 8, 10
8 1 /4 8 3 /2 11 5 /4 11
30 to change
750without notice.
[152, 203,
254] are[203]
[44] [203]
[89] freight
[279]
[133]and[279]
Prices subject
Warehouse,
prepaid
added[178]
to invoice.
All shipments
FOB Hoffman
TBD/TBDI 475
36
900
3/4 in. [19] Slot
48
1200
12
11 13/4 11 31/2 11 51/4 11
7
60
1500
[305]
[279] [44] [279] [89] [279] [133] [279] [178]
24
600
6, 8, 10
8
2
8
4
11
6
11
8
D-31
39
FANS / DAMPERS /
CURBS
MISCELLANEOUS
AIR DISTRIBUTION PRODUCTS
• Constructed of 26 ga. galvanized steel
• Open square corners
Size
Price Each
6x6x5
$9
12 x 12 x 12
$13
20 x 20 x 14
$24
6x6x6
$9
15 x 15 x 10
$16
20 x 20 x 16
$24
8x8x6
$10
15 x 15 x 12
$16
20 x 20 x 18
$24
8x8x7
$10
15 x 15 x 14
$16
*21 x 21 x NO
$20
8x8x8
$10
16 x 16 x 14
$19
*22 x 22 x NO
$21
9x9x6
$11
18 x 18 x 12
$21
22 x 22 x 6
$26
9x9x7
$11
18 x 18 x 14
$21
22 x 22 x 8
$26
9x9x8
$11
18 x 18 x 16
$21
22 x 22 x 10
$26
9x9x9
$11
18 x 18 x 18
$21
22 x 22 x 12
$26
10 x 10 x 8
$12
*20 x 20 x NO
$20
22 x 22 x 14
$26
10 x 10 x 9
$12
20 x 20 x 6
$24
22 x 22 x 16
$26
10 x 10 x 10
$12
20 x 20 x 8
$24
22 x 22 x 18
$26
12 x 12 x 8
$13
20 x 20 x 10
$24
12 x 12 x 10
$13
20 x 20 x 12
$24
SPIRAL PIPE
& ACCESSORIES
*Square box with no openings.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Price Each
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Size
VAV TERMINALS /
HOT WATER COILS
Price
Each
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
SIZE X SIZE X NO
Size
VARIABLE SPEED
DRIVES & STARTERS
MODEL F3S0 SQUARE-TO-ROUND ADAPTERS
CONCENTRIC REDUCERS
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
• Galvanized steel construction
• Used to connect flexible duct to round neck diffusers
Size
Price Each
6” x 4”
$8
10” x 9”
$11
6” x 5”
$8
12” x 8”
$11
8” x 6”
$9
12” x 10”
$11
8” x 7”
$9
14” x 10”
$17
10” x 8”
$11
14” x 12”
$17
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
Price Each
VIBRATION ISOLATION
Size
SINGLE DUCT VARIABLE VOLUME TERMINALS
CONTROLS BY OTHERS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
40
Control Terminals are designed for use in low, medium or high
pressure variable air volume, single duct systems.
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
This throttling-type terminal incorporates a single damper blade
which operates through a 90° arc, providing throttling capability
in all positions.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
Controls by Others terminal incorporates many unique features.
Most of these standard features are expensive options for other
manufacturers. The Controls By Others incorporates the Patented
FlowStar airflow sensor along with a Nema 1 enclosure and
120-volt transformer.
PERFORMANCE DATA AND PRICING
Size
Nom.
CFM
Min.
PS
*Controls by Others
Each
5
250
.01
$277
6
400
.08
$277
8
600
.04
$312
10
1100
.05
$336
12
1800
.07
$351
14
2300
.07
$418
CONTROLS BY OTHERS
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
*Terminal provided with controls enclosure (no controls) and 120V transformer.
UNIT SIZE
B
5
6
8
10
12
14
12
12
14
16
20
IMPERIAL UNITS inches
OUTLET
INLET
LENGTH
C
A
L
S
5
22 1/8
8
6
10
8
3 13/16
20 1/8
12 1/2
10
15
12
17 1/2
14
23 5/8
5 5/16
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
41
FANS / DAMPERS /
CURBS
SINGLE DUCT VARIABLE VOLUME TERMINALS
Hot Water Coils
VARIABLE SPEED
DRIVES & STARTERS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VAV TERMINALS /
HOT WATER COILS
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
Part Number
Price Each
WCSXV1R-8
1-Row Hot Water Coil with 1/2” O.D.Sweat Connection for 8” VAV Boxes
$89
WCSXV1R-10
1-Row Hot Water Coil with 1/2” O.D.Sweat Connection for 10” VAV Boxes
$109
WCSXV1R-12
1-Row Hot Water Coil with 1/2” O.D.Sweat Connection for 12” VAV Boxes
$148
WCSXV1R-14
1-Row Hot Water Coil with 1/2” O.D.Sweat Connection for 14” VAV Boxes
$178
WCSXV2R-5,6
2-Row Hot Water Coil with 7/8” O.D.Sweat Connection for 5” & 6” VAV Boxes
$119
WCSXV2R-8
2-Row Hot Water Coil with 7/8” O.D.Sweat Connection for 8” VAV Boxes
$127
WCSXV2R-10
2-Row Hot Water Coil with 7/8” O.D.Sweat Connection for 10” VAV Boxes
$161
WCSXV2R-12
2-Row Hot Water Coil with 7/8” O.D.Sweat Connection for 12” VAV Boxes
$204
WCSXV2R-14
2-Row Hot Water Coil with 7/8” O.D.Sweat Connection for 14” VAV Boxes
$285
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
$89
VIBRATION ISOLATION
1-Row Hot Water Coil with 1/2” O.D.Sweat Connection for 5” & 6” VAV Boxes
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
WCSXV1R-5,6
Description
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
42
BALANCING DAMPERS
www.ruskin.com
MODEL MD-25/35 MANUAL BALANCING DAMPER
• 22 ga. galvanized steel construction
• 3/8 in. square plated steel shaft
Model
Size W x H
Price Each
Model
Size W x H
Price Each
MD-25
12 x 6
$49
MD-25
24 x 12
$69
MD-25
12 x 8
$53
MD-35
14 x 14
$94
MD-25
12 x 10
$53
MD-35
18 x 18
$120
MD-25
12 x 12
$55
MD-35
24 x 18
$125
MD-25
18 x 12
$62
MD-35
24 x 24
$140
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Includes hand quadrant and 2 in. standoff mounting bracket
MODEL MDRS-25 ROUND MANUAL BALANCING DAMPER
• 20 ga. galvanized construction
• Factory-mounted stand-off with locking hand quadrant
• Seal becomes part of ductwork
Model
Size
Frame Length
Price Each
MDRS-25
6
6”
$44
MDRS-25
8
6”
$48
MDRS-25
10
6”
$50
MDRS-25
12
6”
$53
MDRS-25
14
6”
$56
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
• Designed for spiral duct balancing applications
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
43
www.ruskin.com
VARIABLE SPEED
DRIVES & STARTERS
MODEL CD-36 LOW LEAKAGE CONTROL DAMPER
FANS / DAMPERS /
CURBS
CONTROL DAMPERS
• 16 ga. galvanized steel construction, 6 in. opposed blades
• EPDM blade seals, metal compression jamb seals
• Includes outboard support bearing and control shaft
Size W x H
Price Each
12 x 12
$119
30 x 24
$237
18 x 12
$130
36 x 24
$247
24 x 12
$137
30 x 30
$297
14 x 14
$146
36 x 36
$346
18 x 18
$188
42 x 42
$441
24 x 18
$194
48 x 48
$494
24 x 24
$218
Hand Quadrant (HQR050)
$10
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Price Each
VAV TERMINALS /
HOT WATER COILS
Size W x H
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Actuator or hand quadrant sold separately
FLEXIBLE DUCT /
SNAPLOCK & ACC.
MODEL CDRS-25 ROUND LOW LEAKAGE CONTROL DAMPER
• Easily installs in spiral duct
• Polyethylene blade seal ensures low leakage
• Frame constructed of 20 ga. galvanized steel
SPIRAL PIPE
& ACCESSORIES
Hand Quadrant
(sold separately)
Hand Quadrant
(sold separately)
Frame Length
Price Each
CDRS-25
6
6”
$87
CDRS-25
8
6”
$91
CDRS-25
10
6”
$96
CDRS-25
12
6”
$100
CDRS-25
14
6"
$105
Hand Quadrant (HQR050)
$10
2” Stand-off
$5
VIBRATION ISOLATION
Size
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Hand Quadrant
(sold separately)
Model
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
DAMPER ACTUATORS
BELIMO DIRECT MOUNT ACTUATORS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
44
• 24V/120V, 2 position, spring return
• For use on standard or low leakage dampers
• Graduated position indicator and auxiliary SPDT switch
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Direct mount on damper shaft; can be set for CW or CCW rotation
Model
Voltage
Max. Damper Size
Price Each
TFB-24-S
24V
4.5 FT2
$195
TFB-120-S
120V
4.5 FT2
$221
LF-24-S
24V
8 FT2
$231
LF-120-S
120V
8 FT2
$253
NFBUP-S
24V - 240V
15 FT2
$324
AFBUP-S
24V - 240V
33 FT2
$381
SMOKE DETECTORS
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
• Internal closure spring provides consistent closure torque
SYSTEM SENSOR MODEL D4120
SPIRAL PIPE
& ACCESSORIES
• Duct-mounted design
D4120
Smoke Detector
• Samples airstream for early detection of smoke in HVAC systems
• Includes exhaust tube
• Please select sampling tube from accessory listing below
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
• Price Each . . . . $137.00
RTS151 Remote
Test Station
Accessory
APA151
Annunciator
RTS2
Description
Price Each
RTS151
Remote Test Station for testing remotely located smoke detector
$37
APA151
Piezo Annunciator, audible signal appliance for alarm service, red alarm LED,
green power LED, audible alarm
$30
RTS2
Multi-signaling Duct Accessory with Audible Alarm
$91
AOS
Add on strobe for RTS2
$45
DST-1.5
Sampling Tube, 1 1/2 ft.
$7
DST-3
Sampling Tube, 3 ft.
$10
DST-5
Sampling Tube, 5 ft.
$12
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
45
www.ruskin.com
VARIABLE SPEED
DRIVES & STARTERS
MODEL CFD CEILING RADIATION DAMPER
FANS / DAMPERS /
CURBS
CEILING RADIATION DAMPERS
• UL classified radiation dampers
• 22 ga. galvanized blades with UL insulation
• 20 ga. galvanized frame
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
STANDARD FRAME
EXTENDED FRAME
VAV TERMINALS /
HOT WATER COILS
Size*
Price Each
CFD3.5
6x6
$35
CFD3.5
8x8
$39
CFD2
9x9
$45
CFD3.5
10 x 4
CFD3.5
10 x 6
CFD2
Size*
Ext. Frame
Height (H)
$40
CFD3.5
6x6
6”
$41
$42
CFD3.5
8x8
6”
$45
10 x 10
$45
CFD2
9x9
6”
$53
CFD2
12 x 6
$40
CFD2
10 x 10
6”
$53
CFD2
12 x 12
$54
CFD2
12 x 12
8”
$63
15 x 15
8”
$79
Price Each
15 x 15
$67
CFD2
18 x 18
$72
CFD2
18 x 18
8”
$84
CFD4
21 x 21
$102
CFD4
21 x 21
8”
$119
CFD4
22 x 22
$102
CFD4
22 x 22
8”
$119
CFD4
24 x 24
$109
*Extended Frames are actual size.
*Standard Frames – deduct 1/4 inch
MODEL CFDR ROUND CEILING RADIATION DAMPER
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
• UL 555 classified radiation dampers
• Designed for use with round neck diffusers
• Frame and blades are 20 ga. galvanized steel
• Stocked with extended frame only, actual size shown
Size*
Frame
Height
Price
Each
Model
Size*
Frame
Height
Price Each
CFDR3.5
6”
6 1/2”
$43
CFDR2
12”
6 1/2”
$63
CFDR3.5
8”
6 1/2”
$46
CFDR2
14”
6 1/2”
$70
CFDR3.5
10”
6 1/2”
$50
CFDR2
16”
11 1/2”
$79
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
Detailed drawings and installation instructions available at www.ruskin.com
VIBRATION ISOLATION
Model
Add for 24” x 24” insulation blanket (required by some codes for lay-in ceiling applications).
Blankets are cut in the field to fit the diffuser neck. $20.00 each
SPIRAL PIPE
& ACCESSORIES
CFD2
CFD2
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Model
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Model
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
46
FIRE DAMPERS
www.ruskin.com
MODEL FDR25 ROUND FIRE DAMPER
• UL 555 classified damper with 11/2 hour rating
• Approved for use in 2 hour fire partitions
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Galvanized steel construction, 212°F fusible link
• Retaining cinch plates and extended duct connections for adjustable installation
• Low pressure drop
• Vertical and horizontal closure spring operation for assured closure under air flow
(fans on) in HVAC systems
Collar Diameter (in.)
Sleeve Length
Price Each
6
14”
$89
8
14”
$102
10
14”
$110
12
14”
$119
14
14”
$129
16
14”
$140
Type FDR25 dampers are furnished 1/8 in. smaller than given collar dimensions.
MODEL IBD2R/HV ROUND FIRE DAMPER
• Similar to IBD2A, except it includes a round duct attachment collar
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
• 11/2 hour rating for use in 2 hour rated partitions, 212°F fusible link
• Stocked dampers have closure spring and latches for horizontal or vertical installations
• Damper housings are square with 21/2 in. deep round collars
• Recommended for low pressure and low velocity applications only
Collar Diameter
(in.)
Housing Size (in.)
Price Each
6
8x8
$67
8
10 x 10
$73
10
12 x 12
$84
12
14 x 14
$91
14
16 x 16
$120
Type IBD2R dampers are furnished 1/4 in. smaller than given duct and collar dimensions.
Detailed drawings and installation instructions available at www.ruskin.com
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
47
www.ruskin.com
VARIABLE SPEED
DRIVES & STARTERS
MODEL IBD2A/HV RECTANGULAR FIRE DAMPER
FANS / DAMPERS /
CURBS
FIRE DAMPERS
• Curtain style fire damper with 11/2 hour UL rating
• Approved for use in 2 hour fire partitions
• Galvanized steel construction, 212°F fusible link
Price Each
Size A x B
Price Each
6x6
$26
12 x 12
$34
$43
16 x 12
$43
12 x 6
$26
18 x 12
$47
14 x 6
$33
20 x 12
$50
8x8
$29
24 x 12
$50
10 x 8
$29
14 x 14
$48
12 x 8
$29
16 x 14
$48
14 x 8
$34
18 x 14
$52
16 x 8
$34
20 x 14
$57
18 x 8
$40
24 x 14
$57
20 x 8
$45
16 x 16
$48
10 x 10
$33
20 x 16
$57
12 x 10
$33
24 x 16
$57
14 x 10
$40
18 x 18
$59
16 x 10
$40
24 x 18
$65
18 x 10
$45
20 x 20
$69
20 x 10
$48
24 x 24
$69
Note: Type IBD2A dampers are furnished 1/4" smaller than given duct dimensions.
Detailed drawings and installation instructions available at www.ruskin.com
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
*More Sizes and styles available.
*See page 48.
SPIRAL PIPE
& ACCESSORIES
14 x 12
$26
FLEXIBLE DUCT /
SNAPLOCK & ACC.
$26
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
8x6
10 x 6
VAV TERMINALS /
HOT WATER COILS
Size A x B
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Stocked dampers have closure spring and latches for horizontal and vertical
installations
VIBRATION ISOLATION
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
FIRE DAMPERS–QUICK SHIP–24 HOURS
MODEL IBD2A AND IBD2B
RECTANGULAR FIRE DAMPER
Style B prices are in bold print.
• Ships in 24 hours if order received in Greensboro by 11:00 a.m.
Eastern time (Not Guaranteed)
• Please allow 3 days for delivery
• 11/2 hour rating — for use in 2 hour rated partitions
• Changes or cancellation cost 100% of order value.
• Other sizes available
6
8
H 10
E
I 12
G
H 16
T
20
28
I
N 32
C
H 36
E
S 40
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
VIBRATION ISOLATION
WIDTH IN INCHES
I
24
N
44
Model IBD2A
48
12
16
36
45
41
51
46
57
48
60
58
72
68
84
68
84
75
93
80
99
85
105
90
111
94
117
101
125
46
57
48
60
56
69
60
74
68
84
82
102
82
102
87
108
92
114
97
119
101
125
109
134
116
143
20
24
28
32
60 60 68
75
74 74 84 93
63 63 73 78
78 78 90 96
78 80
68
68
84 84 96 99
70 70 80 85
87 87 99 105
80 80 90 94
99 99 111 117
97 97 109 116
119 119 134 143
97 97 109 116
119 119 134 143
109 109 116 133
134 134 143 164
113 113 128 150
140 140 159 185
121 121 140 167
149 149 173 206
128 128 150 179
159 159 185 221
136 136 162 191
167 167 200 236
145 145 174 203
179 179 215 251
36
40
44
48
78
96
82
102
87
108
90
111
99
122
124
153
124
153
145
179
167
206
189
233
203
251
217
268
232
286
82
102
90
111
92
114
97
119
106
131
131
162
131
162
155
191
179
221
203
251
217
268
232
286
247
305
87
108
92
114
97
119
101
125
113
140
140
173
140
173
164
203
191
236
217
268
232
286
247
305
261
322
92
114
97
119
101
125
109
134
121
149
150
185
150
185
176
218
203
251
232
286
247
305
261
322
275
340
MODEL IBD2A & IBD2B HORIZONTAL PRICING
Style B prices are in bold print.
WIDTH IN INCHES
6
8
H 10
E
I 12
G
H 16
T
20
I
24
N
28
I
N 32
C
H 36
E
S 40
44
48
STEAM SPECIALTIES
www.ruskin.com
MODEL IBD2A & IBD2B VERTICAL PRICING
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
48
12
16
20
24
28
32
36
40
44
48
54
62
61
70
68
78
71
82
85
99
100
116
100
116
111
128
118
136
125
145
132
153
139
161
149
173
68
78
71
82
82
95
89
103
100
116
121
141
121
141
128
149
135
157
142
165
149
173
160
185
170
198
89
103
93
108
100
116
104
120
118
136
142
165
142
165
160
185
167
194
177
206
189
219
199
231
213
247
89
103
93
108
100
116
104
120
118
136
142
165
142
165
160
185
167
194
177
206
189
219
199
231
213
247
100
116
107
124
114
132
118
136
132
153
160
185
160
185
170
198
189
219
206
239
220
256
238
276
255
296
111
128
114
132
118
136
125
145
139
161
170
198
170
198
196
227
220
256
245
284
263
305
281
326
299
346
114
132
121
141
128
149
132
153
146
169
182
211
182
211
213
247
245
284
277
322
299
346
320
371
341
395
121
141
132
153
135
157
142
165
156
181
192
223
192
223
227
264
263
305
299
346
320
371
341
395
363
421
128
149
135
157
142
165
149
173
167
194
206
239
206
239
241
280
281
326
320
371
341
395
363
421
384
445
135
157
142
165
149
173
160
185
177
206
220
256
220
256
259
300
299
346
341
395
363
421
384
445
405
470
6
8
10 H
E
12 I
G
16 H
T
20
24
I
N
28
I
N
32
C
36 H
E
40 S
44
48
Available in Dynamic
Consult your Hoffman & Hoffman Salesperson for pricing
Detailed drawings and installation instructions available at www.ruskin.com
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
Model IBD2B
6
8
10 H
E
12 I
G
16 H
T
20
24
28
I
N
I
32 N
C
36 H
E
S
40
44
48
49
FANS / DAMPERS /
CURBS
FIRE DAMPERS–QUICK SHIP–24 HOURS
www.ruskin.com
•
•
IBD20/STYLE A AND B
VERTICAL PRICES
Style B prices are in bold print.
WIDTH IN INCHES
6
8
H
E 10
I
G 12
H
16
T
I
N
20
24
40
44
Model IBD20A
20
24
28
32
36
40
44
76
87
80
91
91
105
99
114
112
128
136
155
136
155
144
164
151
173
159
182
167
191
179
205
99
114
104
119
112
128
116
133
132
151
159
182
159
182
179
205
187
214
199
227
211
242
223
255
99
114
104
119
112
128
116
133
132
151
159
182
159
182
179
205
187
214
199
227
211
242
223
255
112
128
120
137
128
146
132
151
148
169
179
205
179
205
191
218
211
242
231
264
247
282
266
305
124
142
128
146
132
151
140
160
155
178
191
218
191
218
219
251
247
282
274
314
294
336
315
360
128
146
136
155
144
164
148
169
163
187
204
233
204
233
239
273
274
314
311
355
334
382
358
409
136
155
148
169
151
173
159
182
175
200
215
246
215
246
255
291
294
336
334
382
358
409
382
436
144
164
151
173
159
182
167
191
187
214
231
264
231
264
270
309
315
360
358
409
382
436
406
464
IBD20/STYLE A AND B
HORIZONTAL PRICES
6
8
H
10 E
I
12 G
H
16
T
20
24
I
N
I
N
32 C
H
36 E
S
28
40
44
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Model IBD20B
16
60
69
68
78
76
87
80
91
95
109
112
128
112
128
124
142
132
151
140
160
148
169
155
178
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
I
28
N
C 32
H
E 36
S
12
VAV TERMINALS /
HOT WATER COILS
•
•
•
No additional sleeve needed in most installations
11/2 hour rating for 2 hour rated fire partitions
Galvanized steel construction
UL listed 165°F fuse link standard. 212°F and 285°F fuse links
available
Available with springs and latches for horizontal or vertical
installation (specify when ordering)
Ships in 24 hours if order received in Greensboro by 11:00 a.m.
Eastern time (Not Guaranteed)
Please allow 3 days for delivery
Changes or cancellation cost 100% of order value.
Other sizes available
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
•
•
•
•
VARIABLE SPEED
DRIVES & STARTERS
MODEL IBD20A & B INTEGRAL SLEEVE FIRE DAMPER
Style B prices are in bold print.
6
8
I
N
20
24
40
24
28
32
36
40
44
128
142
134
149
144
160
149
166
169
188
205
228
205
228
230
256
240
267
255
284
272
302
287
319
128
142
134
149
144
160
149
166
169
188
205
228
205
228
230
256
240
267
255
284
272
302
287
319
144
160
154
171
164
183
169
188
190
211
230
256
230
256
245
273
272
302
297
330
317
353
343
381
159
177
164
183
169
188
180
199
200
222
245
273
245
273
282
313
317
353
353
392
378
420
405
450
164
183
174
194
185
205
190
211
210
233
262
291
262
291
307
341
353
392
400
444
430
478
460
511
174
194
190
211
195
216
205
228
225
250
277
308
277
308
327
364
378
420
430
478
460
511
491
545
185
205
195
216
205
228
215
239
240
267
297
330
297
330
348
386
405
450
460
511
491
545
522
580
6
8
H
10 E
I
12 G
H
16
T
20
24
I
N
I
N
32 C
H
36 E
S
28
40
44
PICTURE FRAME MOUNTING
ANGLES
•
•
•
•
•
Makes damper installation quick and easy
Proven savings in labor cost
Precut and punched to fit damper exactly
Add 50% to cost of damper
Detailed drawings and installation instructions
available at www.ruskin.com
Available in Dynamic
Consult your Hoffman & Hoffman Salesperson for pricing
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
44
20
97
108
102
114
118
131
128
142
144
160
174
194
174
194
185
205
195
216
205
228
215
239
230
256
VIBRATION ISOLATION
I
28
N
C 32
H
E 36
S
16
77
86
87
97
97
108
102
114
123
136
144
160
144
160
159
177
169
188
180
199
190
211
200
222
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
H
E 10
I
G 12
H
16
T
12
SPIRAL PIPE
& ACCESSORIES
WIDTH IN INCHES
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
50
BRICK VENTS
MODEL LBV CAST ALUMINUM BRICK VENT
• 4 in. deep
• Cast aluminum, load bearing construction
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Includes water stop and insect screen
Model
Size
Price Each
LBV88
8 x 7 3/4
$109
LBV168
16 x 7 3/4
$121
MODEL EX EXTRUDED ALUMINUM BRICK VENT
• 4 in. deep
• Extruded aluminum, load bearing construction
• Clear anodized finish
• Includes water stop and insect screen
Model
Size
Price Each
EX808
8 1/8 x 7 3/4
$80
EX128
12 x 7 3/4
$94
EX157
15 5/8 x 7 3/4
$110
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
MODEL FL FLANGED EXTRUDED ALUMINUM BRICK VENT
• 1 - 1/2 in. deep with 1 in. flange
• Extruded aluminum, non-load bearing construction
• Includes water stop, storm drip blade and insect screen
Model
Size
Price Each
FL808
8 1/8 x 7 3/4
$80
FL128
12 x 7 3/4
$94
FL1212
12 x 11 3/4
$124
FL157
15 5/8 x 7 3/4
$110
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
51
www.ruskin.com
VARIABLE SPEED
DRIVES & STARTERS
MODEL ELF211 THINLINE STATIONARY LOUVER
Size
WxH
12 x 12
0.26
$124
18 x 12
0.45
$140
24 x 12
0.76
$153
VAV TERMINALS /
HOT WATER COILS
H
Free Area (Ft2) Price Each
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Extruded aluminum construction
• 2 in. deep, .060 in. channel frame and blades
• Expanded aluminum birdscreen (on inside)
• Standard mill finish
• More sizes available on 72 hr. shipment. See page 52.
• Flanged frames available on 72 hr. shipment. See page 52.
W
FANS / DAMPERS /
CURBS
STATIONARY ALUMINUM LOUVERS
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Extruded aluminum construction
4 in. deep, .080 in. channel frame with caulking slots
Blades are .080 in., drainable
Expanded aluminum birdscreen (on inside)
Standard mill finish
More sizes available on 72 hr. shipment. See page 53.
Flanged frames available on 72 hr. shipment. See page 53.
SPIRAL PIPE
& ACCESSORIES
•
•
•
•
•
•
•
FLEXIBLE DUCT /
SNAPLOCK & ACC.
MODEL GFL800D STATIONARY LOUVER
Free Area
(Ft2)
Price Each
Size
WxH
Free Area
(Ft2)
Price Each
18 x 18
0.67
$170
30 x 30
2.59
$355
24 x 18
0.93
$194
36 x 30
3.15
$394
24 x 24
1.49
$214
36 x 36
3.85
$427
30 x 24
1.90
$235
42 x 42
5.18
$523
36 x 24
2.31
$259
48 x 48
7.10
$621
• Screen adds 1/2 in. to depth.
• All louvers furnished 1/4 in. smaller than nominal opening size shown.
VIBRATION ISOLATION
NOTES — ALL LOUVERS:
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Size
WxH
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
52
LOUVERS – 72 HOUR SHIPMENT
www.ruskin.com
MODEL ELF211, 2" DEEP LOUVERS AVAILABLE FOR
SHIPMENT FROM THE FACTORY IN 72 HOURS.
• Orders must be placed by 10:30 a.m. for 72 hour shipment FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Orders over $2,000.00 may take longer than 72 hours
• Please allow 5 days for delivery
Price Matrix
WIDTH IN INCHES
H
E
I
G
H
T
I
N
I
N
C
H
E
S
12
18
24
30
36
42
48
54
60
12
180
203
223
244
264
282
307
394
422
12
16
203
226
251
277
300
325
358
460
495
16
20
223
251
282
313
343
368
407
526
566
20
24
239
274
310
345
381
414
457
589
637
24
28
328
378
429
480
528
584
642
655
709
28
32
348
409
467
521
576
637
703
716
782
32
36
376
437
503
564
627
688
764
782
851
36
40
401
472
538
604
673
742
823
845
919
40
44
407
488
554
660
698
767
853
906
990
44
48
442
515
591
668
747
820
911
967
1059
48
52
470
551
632
714
800
876
975
1031
1125
52
56
503
589
668
759
853
932
1036
1092
1186
56
60
533
624
714
805
899
990
1092
1155
1254
60
H
E
I
G
H
T
I
N
I
N
C
H
E
S
SPIRAL PIPE
& ACCESSORIES
ORDERING INSTRUCTIONS
SCREEN: front q rear q bird q insect q
FRAME: box q front flange q
SIZE: width___ height___ actual size q deduct 1/4” q
FRAME CONSTRUCTION
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Box frame or Flanged (Front or Rear)
STEAM SPECIALTIES
(Box)
For performance call your Hoffman & Hoffman Salesperson or consult www.ruskin.com
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
53
www.ruskin.com
VARIABLE SPEED
DRIVES & STARTERS
MODEL GFL800D, 4" DEEP LOUVERS AVAILABLE FOR
SHIPMENT FROM THE FACTORY IN 72 HOURS.
FANS / DAMPERS /
CURBS
LOUVERS – 72 HOUR SHIPMENT
• Orders must be placed by 10:30 a.m. for 72 hour shipment • Orders over $2,000.00 may take longer than 72 hours
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Please allow 5 days for delivery
Price Matrix
WIDTH IN INCHES
30
36
42
48
54
60
12
147
160
178
195
211
226
247
313
338
12
16
160
180
198
221
241
256
284
363
394
16
20
178
198
226
249
272
295
322
419
449
20
24
190
219
249
274
302
330
363
467
505
24
28
259
300
343
381
419
462
510
521
564
28
32
277
325
371
414
460
505
559
569
622
32
36
297
348
399
447
497
546
607
622
676
36
40
320
376
429
480
536
589
653
670
731
40
44
322
388
442
495
556
609
678
721
787
44
48
350
409
470
530
594
650
724
769
841
48
52
374
439
501
566
637
693
775
818
891
52
56
399
467
530
602
678
739
823
869
939
56
60
424
495
566
640
714
787
869
917
993
60
H
E
I
G
H
T
I
N
I
N
C
H
E
S
FLEXIBLE DUCT /
SNAPLOCK & ACC.
I
N
C
H
E
S
24
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
I
N
18
VAV TERMINALS /
HOT WATER COILS
H
E
I
G
H
T
12
ORDERING INSTRUCTIONS
SPIRAL PIPE
& ACCESSORIES
SCREEN: front q rear q bird q insect q
FRAME: box q front flange q
SIZE: width___ height___ actual size q deduct 1/4” q
Box frame or Flanged (Front or Rear)
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
FRAME CONSTRUCTION
VIBRATION ISOLATION
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
For performance call your Hoffman & Hoffman Salesperson or consult www.ruskin.com
ACCESS DOORS
MODEL ADC-14 CAM-TYPE ACCESS DOOR
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
54
• 24 ga. galvanized steel construction
• 1/2 in. insulation board, aluminum foil faced
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Neoprene gasket and cam locks for tight closure
VAV TERMINALS /
HOT WATER COILS
• Starter tab for easy installation
Nominal Size
Price Each
Nominal Size
Price Each
6” x 6”
$12
14” x 14”
$22
8” x 8”
$13
16” x 16”
$26
10” x 10”
$15
18” x 18”
$30
12” x 12”
$17
24” x 24”
$45
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
MODEL ADH-14 HINGED ACCESS DOOR
• 24 ga. galvanized steel construction
• 1/2 inch insulation board, aluminum foil faced
• Neoprene gasket and cam locks for tight closure
Nominal Size
Price Each
Nominal Size
Price Each
6” x 6”
$12
14” x 14”
$22
8” x 8”
$13
16” x 16”
$26
10” x 10”
$15
18” x 18”
$30
12” x 12”
$17
24” x 24”
$45
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
• Starter tab for easy installation
MODEL RADI ROUND SPIRAL ACCESS DOOR
• Insulated construction with neoprene gaskets
• Synthetic knobs with metal threaded inserts for ease of turning and prevention of thread stripping
• No need for tools to open
Duct Size (in.)
Opening Size (in.)
Door Size (in.)
Price Each
6
3x7
4x8
$71
8-10
3x7
4x8
$71
12-14
7 x 11
8 x 12
$93
16-18
7 x 11
8 x 12
$93
20-24
11 x 15
12 x 16
$131
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
55
FANS / DAMPERS /
CURBS
ACCESS PANELS
VARIABLE SPEED
DRIVES & STARTERS
STYLE K ACCESS PANEL
• For use in ceilings, masonry and dry walls
• Convenient access to plumbing, heating and electrical systems
• Aluminum frame, 14 ga. steel panel
Overall Size
Depth
Price Each
8x8
8 3/8 x 8 3/8
10 5/8 x 10 5/8
1 1/2”
$56
12 x 12
12 3/8 x 12 3/8
14 5/8 x 14 5/8
1 1/2”
$70
18 x 18
18 3/8 x 18 3/8
20 5/8 x 20 5/8
1 1/2”
$86
24 x 24
24 3/8 x 24 3/8
26 5/8 x 26 5/8
1 1/2”
$167
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
STYLE AP-FR FIRE-RATED ACCESS PANEL
VAV TERMINALS /
HOT WATER COILS
Wall Opening
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Door Size
• For use in fire-rated walls and ceilings
• Provided with masonry anchors, concealed hinges, turn knob or flush key hole
• 16 ga. steel frame, 20 ga. steel panel
Overall Size
Depth
Price Each
8x8
8 3/8 x 8 3/8
10 x 10
2 9/16”
$167
12 x 12
12 3/8 x 12 3/8
14 x 14
2 9/16”
$173
18 x 18
18 3/8 x 18 3/8
20 x 20
2 9/16”
$222
24 x 24
24 3/8 x 24 3/8
26 x 26
2 9/16”
$272
SPIRAL PIPE
& ACCESSORIES
Wall Opening
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Door Size
STYLE AHD ACCESS PANEL
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
• For all surface types
• 16 ga. cold rolled steel
• Screwdriver operated cam latch
Wall Opening
Overall Size
Depth
Price Each
8x8
8 1/4 x 8 1/4
10 x 10
1 1/2”
$38
12 x 12
12 1/4 x 12 1/4
14 x 14
1 1/2”
$43
18 x 18
18 1/4 x 18 1/4
20 x 20
1 1/2”
$65
24 x 24
24 1/4 x 24 1/4
26 x 26
1 1/2”
$95
VIBRATION ISOLATION
Door Size
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
56
FLEXIBLE DUCT By Flexmaster
SUPERIOR QUALITY • MECHANICAL JOINED WITHOUT ADHESIVES
TYPE 1MR6 – INSULATED ACOUSTIC
A factory insulated, fully lined duct for use in low and medium pressure air distribution systems. The inner core is constructed of an acoustic
material which allows sound waves to penetrate and be absorbed by the insulation. Solid mechanical union of fabric and corrosion resistant
galvanized steel spiral helix creates an extraordinary durable seam. Thermally insulated to an R Value of 6.0 and supplied with a reinforced
metalized protective barrier. Manufactured in 25' lengths and compressed for easy handling. Working pressure: +10" w.g.
Inside Dimension
Inches
Price per 25’
Length
Inside Dimension
Inches
Price per 25’
Length
6
$89
14
$180
8
$108
16
$215
10
$126
18
$264
12
$149
NS300 – 1-3/4 IN X 300 FT HANGING NOVA STRAP..........$22
TYPE 3MR6 – HIGH PRESSURE – INSULATED
A factory insulated, fully lined duct for use in high pressure air distribution systems. The core is fabricated of a trilaminate of aluminum foil,
fiberglass and aluminized polyester mechanically locked into a corrosion resistant galvanized steel spiral helix. Thermally insulated to an
R Value of 6.0 and supplied with a reinforced metalized protective barrier. Manufactured in 25' lengths and compressed for easy handling.
Working pressure: +20" w.g.
Inside Dimension
Inches
Price per 25’
Length
Inside Dimension
Inches
Price per 25’
Length
6
$137
12
$232
8
$165
14
$272
10
$198
16
$324
NS300 – 1-3/4 IN X 300 FT HANGING NOVA STRAP..........$22
TYPE 3NI – HIGH PRESSURE – UNINSULATED
An uninsulated flexible duct suitable for high pressure systems. Type 3NI is constructed of a coated fiberglass fabric mechanically interlocked
by a corrosion resistant galvanized steel spiral helix on the outside of the fabric. Working pressure: +20" w.g.
Inside Dimension
Inches
Price per 25’
Length
Inside Dimension
Inches
Price per 25’
Length
6
$52
12
$91
8
$64
14
$98
10
$78
NS300 – 1-3/4 IN X 300 FT HANGING NOVA STRAP..........$22
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
57
FANS / DAMPERS /
CURBS
FLEXIBLE DUCT by JP Lamborn
Flexible duct is constructed with a spring steel wire helix, encapsulated in a 2-ply, airtight inner core. Extra-thick insulation with a thermal value of R6 encompasses the core
and a metalized, reinforced vapor barrier surrounds the entire duct. Positive pressure: 6”
W.G. (4”-12”) 4” W.G. (14”-20”). Negative pressure: 1” W.G. (4”-10”) 1/2” W.G. (12”-20”).
Price per 25’
Length
6
$50
14
$111
8
$59
16
$128
10
$74
18
$147
12
$92
20
$181
NS300 - 1 3/4 in x 300 ft Hanging NOVA Strap......................$22
Flexible duct is constructed with a spring steel wire helix, encapsulated in a 2-ply, airtight inner core. Extra-thick insulation with a thermal value of R8 encompasses the core
and a metalized, reinforced vapor barrier surrounds the entire duct. Positive pressure: 6”
W.G. (4”-12”) 4” W.G. (14”-20”). Negative pressure: 1” W.G. (4”-10”) 1/2” W.G. (12”-20”).
FLEXIBLE DUCT /
SNAPLOCK & ACC.
TYPE MHP25R8 INSULATED DUCT
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Inside Dimension
Inches
VAV TERMINALS /
HOT WATER COILS
Price per 25’
Length
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Inside Dimension
Inches
VARIABLE SPEED
DRIVES & STARTERS
TYPE MHP25R6 INSULATED DUCT
SPIRAL PIPE
& ACCESSORIES
Price per 25’
Length
Inside Dimension
Inches
Price per 25’
Length
6
$66
12
$119
8
$80
14
$137
10
$96
16
$165
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Inside Dimension
Inches
NS300 - 1 3/4 in x 300 ft Hanging NOVA Strap......................$22
VIBRATION ISOLATION
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
FLEXMASTER STICK-ON FITTINGS
TYPE FLD-B03-SOG STICK-ON FITTING
•
•
•
•
•
•
Round takeoff to sheet metal duct
Quality adhesive backing for quick mounting
Neoprene sponge gasket for low leakage
Includes damper and hand quadrant with 2” build out
3/8” steel shaft
Galvanized steel construction
FLD-B03
Size
Diameter
Length
Price Each
6
5 7/8
7
$14
8
7 7/8
7
$16
10
9 7/8
7
$18
12
11 7/8
7
$22
14
13 7/8
7
$24
16
15 7/8
7
$30
18
17 7/8
7
$41
TYPE FLDE-B03-SOG STICK-ON FITTING
•
•
•
•
Round takeoff to sheet metal duct
Quality adhesive backing for quick mounting
Neoprene sponge gasket for low leakage
Includes damper, hand quadrant with 2” build out and
45° extractor
• 3/8” steel shaft
• Galvanized steel construction
FLDE-B03
Size
Diameter
Length
Price Each
6
5 7/8
7
$19
8
7 7/8
7
$22
10
9 7/8
7
$25
12
11 7/8
7
$29
14
13 7/8
7
$31
16
15 7/8
7
$38
18
17 7/8
7
$51
TYPE STO-D-B03 SIDE TAKEOFF FITTING
•
•
•
•
For use on sheet metal duct
Aerodynamic design improves performance
Prepunched holes and adhesive coated gasket
Includes damper and hand quadrant with
2” build out
• 3/8” steel shaft
• Galvanized steel construction
STOD -B03
Diameter
Size
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
58
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
Length
Rectangle
Price Each
Opening
6
5 7/8
13
5x9
$26
8
7 7/8
13
6 x 12
$30
10
9 7/8
13
8 x 14
$35
12
11 7/8
13
10 x 16
$42
14
13 7/8
13
12 x 18
$49
16
15 7/8
13
14 x 20
$57
59
FANS / DAMPERS /
CURBS
SNAPLOCK PIPE AND ACCESSORIES
TYPE FLD SPIN FITTING
• Round takeoff to sheet metal duct
• Galvanized steel construction
• Round takeoff to sheet metal duct
• Includes damper and hand quadrant
• Galvanized steel construction
Size
90˚ ADJUSTABLE ELBOWS
Description
Price Each
$16
6
6” 5FT 26 GA
$20
8
8” 5FT 26 GA
$26
10
10” 5FT 26 GA
$31
12
12” 5FT 26 GA
$38
14
14” 5FT 26 GA
$46
TYPE FLDE SPIN FITTING
FL
Size
• Round takeoff to sheet metal6 duct
• Includes damper, hand quadrant
8
and 45° extractor
10
• Galvanized steel construction
G
5
4 7/8
9
$10
G
END 6CAPS
5 7/8
9 1/2
$7
G
6 7/8
10
$7
G
11
6
8
10
12
10
12
14
16
9 7/8
11 1/2
4” 28
GA End Cap
$8
G
$10
G
$12
G
13 7/8
13
$15
G
15 7/8
14
$18
G
10” 28 GA End Cap
$12
12” 28 GA End Cap
$15
9 7/8
$16
C
K
• Neoprene sponge gasket for low leakage
G7
13 7/8$3• Includes
G
damper $12
and hand quadrant
$4
G7
steel construction
15 7/8 • Galvanized
$14
G
G7
17 7/8$4
$22
G
Diameter
Length
Price Each
S
T
O
C
K
TAKEOFFS6
5 7/ 8
7
$7
GCK
8
7 7/8
7
$8
GCK
10
9 7/8
7
$10
12
11 7/8
7
$12
Model
Size
14
4
ATD
ATD
ATD
16
ATD
Description
13 7/8 with Damper
7
4” Takeoff
GCK
Price Each
GCK
$16
GK $14
15 7/8
7
$19
GK
17 7/8
7
$29
GK
6
6” Takeoff with Damper
8
8” Takeoff with Damper
10
10” Takeoff with Damper
12
12” Takeoff with Damper
18
ATSD
$12
$14
$21
FLDE- SOG
Diameter
Length
14”
Takeoff with
Damper Price Each
14
Size
S
T
O
C
K
$28
$32
4
4” Takeoff with Damper & Scoop
86
6” Takeoff
Damper
7 7/8 with 10
1/2 & Scoop
$10
8
10
8” Takeoff
Damper
9 7/8 with 11
1/2 & Scoop
$12
GC $25
12
10
7/8 with 12
$15
10”11Takeoff
Damper & Scoop
GC $33
ATSD
14
12
7/8 with 13
$19
12”13Takeoff
Damper & Scoop
ATSD
16
6
14
18
FOB Hoffman
Prices subject
withoutWarehouse
notice. All shipments
Warehouse,Kfreight
prepaidWarehouse
and added to invoice.
STOCKED
IN: Gto- change
Greensboro
C - are
Columbia
Warehouse
- Knoxville
Prices subject to change without notice. All shipments are FOB Greensboro, freight prepaid and added to invoice.
5 7/ 8
9 1/2
$8
GC
GC $23
G $45
15 7/8
14
$22
G
17 7/8
15
$33
G
14” Takeoff with Damper & Scoop
$23
$57
STEAM SPECIALTIES
SHAFT EXTENSION FOR ALL OF THE ABOVE
7 7/8
7
$6
G
• RoundG takeoff to sheet metal duct
$2
9 7/8
7
$8
G
• Quality
for quick mounting
G7 adhesive backing
11 7/8$3
$9
G
FLD- SOG
Size
ATD
Round takeoff to sheet metal duct
ATSD
Quality adhesive backing for quick mounting
ATSD
Neoprene sponge gasket for low leakage
Includes damper, hand quadrant and 45° extractorATSD
Galvanized steel construction
ATSD
BO1 Kit - $3.00
S
T
O
C
K
VIBRATION ISOLATION
TYPE
FLDE-SOG
STICK-ON
$16 FITTING
14
14” 28 GA End Cap
•
•
•
•
•
12” 26 GA Elbow
10 3
12 3
ATD
12
$10
12
8
7 7/8
ATD
8” 28 GA End Cap
$13
6
5 7/8
7 STICK-ON
$5
GFITTING
TYPE
FLD-SOG
3
$2
G
G
$9
10” 26 GA Elbow
S
FLD
T
Diameter
Length
Price Each$22
14
14”Each
26 GA
Elbow
O
Size
Length
Price
5 7/8
$10
$8
11 7/8
6” 28 GA End Cap
10
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
4
$9
SPIRAL PIPE
& ACCESSORIES
$10
8 7/8
8” 26 GA Elbow
FLEXIBLE DUCT /
SNAPLOCK & ACC.
9
9
8
18 3
3 7/8
Price Each
$6
15 7/8
4
10 1/2
6” 26 GA Elbow
13 7/8
Price Each
Description
6
14
Length
7 7/8
$6
14 3
16 3
Diameter
8
4” 26 GA Elbow
11 7/8
FLDE
Size
Price Each
4
12
S
T
16
O
C
K
Size
Diameter
Description
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
4” 5FT 26 GA
Size
VAV TERMINALS /
HOT WATER COILS
4
7
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
SNAPLOCK PIPE
VARIABLE SPEED
DRIVES & STARTERS
TYPE FL SPIN FITTING
SNAPLOCK PIPE ACCESSORIES
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
60
TEES
Size
WYES
Description
Price Each
Size
4" 26 GA Tee
$30
4
4" 28 GA Wye
$21
6
6” 26 GA Tee
$33
6
6” 28 GA Wye
$21
8
8” 26 GA Tee
$42
8
8” 28 GA Wye
$21
10
10” 26 GA Tee
$48
10
10” 28 GA Wye
$26
12
12” 26 GA Tee
$49
12
12” 28 GA Wye
$40
14
14" 26 GA Tee
$54
14
14" 28 GA Wye
$54
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Size
• Round takeoff to round metal duct
• Polyethylene cross-linked fire retardant gasket
• 1 1/2” gasket and flange
• 26 gauge galvanized construction
• Includes damper and hand quadrant
Fits Duct
Sizes
Price Each
4
8-20
$13
6
10-20
$13
8
12-16
$16
10
12-18
$26
12
16-20
$30
14
16-22
$36
ACCESSORIES
Model
VIBRATION ISOLATION
Price Each
4
AIR-TITE STICK-ON SADDLE
VRV &STEAM
ACCESSORIES
SPECIALTIES
Description
Description
Price Each
SUPERSEAL 1
UL 181-B 1 Gallon Duct Sealant
$29
BB2
2 Inch Bristle Brush
$2
BB3
3 Inch Bristle Brush
$2
PPT10X1/2
Pro Point Screw (1000 Per Bucket)
$42
PPT10X3/4
Pro Point Screw (1000 Per Bucket)
$42
PPT10X1
Pro Point Screw (1000 Per Bucket)
$43
DCL516
2 5/8” Long Chuck For 5/16” Hex Head
$10
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
61
67
FANS
/ DAMPERS
/ /
FANS
/ DAmPERS
CURBS
CuRBS
CLAMPS
AND Tools
TOOLS
claMps and
VARIABLESPEED
SPEED
VARIABlE
DRIVES&&STARTERS
STARTERS
DRIVES
STAINLESS STEEL CLAMPS
price each
diameter
price each
4-5”
$2.10
12”
$3.55
6”
$2.30
14”
$3.90
8-9”
$2.85
16”
$4.15
10”
$3.10
18”
$4.50
20”
$4.70
NYLON CLAMPS
• Self-locking, 175 lb. tensile strength
• 36 in. cone; join 2 together for larger diameters
• Clamps are releasable until applied with tensioning tool
price each for 1 - 299
price each for 300 - 499
price each for 500 - up
$.45
$.44
$.43
MODEL DIT-2 TENSIONING TOOL
price each
DIT-2
$75
STEAM
VRV &SPECIALTIES
ACCESSORIES
Prices subject
subject to
to change
change without
without notice.
notice. All
All shipments
shipments are
are FOB
FOB hoffman
Prices
Hoffman Warehouse,
Warehouse, freight
freight prepaid
prepaidand
andadded
addedtotoinvoice.
invoice.
Model
VIBRATION
ISOLATION
STEAm
SPECIAlTIES
• Heavy duty construction
• Mechanical advantage assures tight clamping action
VAV TERMINALS
/ DAmPERS / DAMPERS
DUCT / SPIRAl PIPE
SPIRAL PIPE
HEATERS /ISOlATION
/
VAV TERmINAlS
/
lOuVERS // LOUVERS / FlExIBlE DuCTFLEXIBLE
ElECTRIC hEATERS / ELECTRICVIBRATION
ACCESS
DOORS / ACTUATORSSNAPlOCK & ACC.
SNAPLOCK & ACC.& ACCESSORIES & ACCESSORIES
HOTCOIlS
WATER COILS ACCESS DOORS
FILTERS & ACCESSORIES
/ ACTuATORS
hOT WATER
FIlTERS & ACCESSORIES
diameter
REGISTERS
/ GRILLES
REGISTERS
/ GRIllES
/ /
DIFFUSERS
/ TRANSITIONS
DIFFuSERS
/ TRANSITIONS
• Worm drive, swivel action
• Suitable for high or low pressure, insulated or uninsulated
TAPE AND SEALANTS
DUCT TAPE
• PC857 Duct Tape UL 181-B-FX 82P4
• AF100-A HVAC Foil Tape UL 181-A-P/B-FX
Model
WxL
Price Each
PC857-2
2” x 60 yards
$23
PC857-3
3” x 60 yards
$34
AF100-A-2.5
2.5” x 60 yards
$27
MASTIC TAPE
• SF686 Mastic Tape UL 181-B-FX
Model
WxL
Price Each
SF686-2
2" x 100 ft.
$42
SF686-3
3" x 100 ft.
$56
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
62
•
•
•
•
Durable and puncture resistant
Self-adhesive inner surface
Excellent for ductwork
Easily removable without leaving residue
Model
Description
Price Each
DW24-200
24 inch DYN-O-WRAP
$39
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
DYN-O-WRAP
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
63
FANS / DAMPERS /
CURBS
PIPE PORTAL SYSTEMS
Price Each
RC-12 Curb
$61
CC Curb Cover
$79
VAV TERMINALS /
HOT WATER COILS
Model
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Model CC
C-212
C-481
Cap Model
Accommodates Pipe Sizes
Price Each
C-126 (1 pipe)
Single pipe 2” thru 6”
$75
C-212 (4 pipe)
Two pipes 3/8” thru 1”
Two pipes 1” thu 2”
$75
C-481 (4 pipe)
Four pipes 3/8” thru 1”
$75
FLEXIBLE DUCT /
SNAPLOCK & ACC.
C-126
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Model RC-12
VARIABLE SPEED
DRIVES & STARTERS
PIPE FLASHING SYSTEM
This system is designed to allow both vertical and horizontal pipe movement, yet provides a
maintenance free permanent installation which accommodates pipe sizes of 3/8” to 6”. The system
is offered in three parts: roof curb, curb cover, and rubber cap (1-pipe or 4-pipe). The curb cover
is molded from ABS plastic with a laminated acrylic coating, which gives high resistance to both
ozone and ultraviolet exposure. The caps are compression molded of EPDM rubber with conical
shaped steps on the nipple for a taut weatherproof seal around the pipe. Caps include stainless
steel clamps for added pipe seal protection.
SPIRAL PIPE
& ACCESSORIES
Price Each
Alumi-Flash
$91
Alumi-Flash
VIBRATION ISOLATION
Model
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SELF-FLASHING SYSTEM
Alumi-Flash for hot applied roof systems. In some installations, the Alumi-Flash may be used in
lieu of a curb. The 8" diameter top accepts any of the rubber caps. Construction is spun aluminum.
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
64
SELF-SEALING SPIRAL PIPE AND FITTINGS
By Eastern Sheet Metal
Eastern Sheet Metal
• Single wall spiral duct
• All fittings have factory installed gaskets
• Galvanized steel construction (ASTMA 527)
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Prices DO NOT include freight
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
STRAIGHT PIPE 10 FT. LENGTHS
Part
Number
Duct
Diameter
Wt. Each
(lbs.)
Ga.
Price Per
10 Ft.
Length
ESSP3
3
8.1
26
$30
ESSP4
4
10.8
26
$39
ESSP5
5
13.5
26
$47
ESSP6
6
16.2
26
$56
ESSP8
8
21.6
26
$73
ESSP10
10
27.0
26
$91
ESSP12
12
32.4
26
$108
ESSP14
14
37.8
26
$126
ESSP16
16
43.2
26
$143
ESSP18
18
48.6
26
$160
ESSP20
20
54.0
26
$177
ESSP22
22
59.4
26
$194
ESSP24
24
64.8
26
$215
SPIRAL PIPE
& ACCESSORIES
BELLMOUTH
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Diameter + 4"
Part
Number
Duct
Diameter
Wt. Each
(lbs.)
Ga.
Price Each
PBT4
4
0.4
26
$31
PBT5
5
0.5
26
$31
PBT6
6
0.6
26
$33
PBT8
8
0.8
26
$36
PBT10
10
1.1
26
$41
PBT12
12
1.3
26
$42
PBT14
14
2.6
26
$82
PBT16
16
2.9
26
$96
PBT18
18
3.3
26
$109
PBT20
20
3.5
24
$122
PBT22
22
3.9
24
$142
PBT24
24
4.2
24
$151
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
65
Eastern Sheet Metal
Ga.
Price Each
PCPT3
3
0.3
26
$16
PCPT4
4
0.4
26
$16
PCPT5
5
0.5
26
$17
PCPT6
6
0.5
26
$17
PCPT8
8
0.7
26
$18
PCPT10
10
0.9
26
$19
PCPT12
12
1.1
26
$20
PCPT14
14
1.3
26
$21
PCPT16
16
1.4
26
$22
PCPT18
18
1.6
26
$22
PCPT20
20
2.3
24
$28
PCPT22
22
2.5
24
$29
PCPT24
24
2.7
24
$30
Ga.
Price Each
FCPT3
3
0.3
26
$4
FCPT4
4
0.4
26
$4
FCPT5
5
0.5
26
$4
FCPT6
6
0.5
26
$5
FCPT8
8
0.7
26
$5
FCPT10
10
0.9
26
$6
FCPT12
12
1.1
26
$7
FCPT14
14
1.3
26
$7
FCPT16
16
1.4
26
$8
FCPT18
18
1.6
26
$8
FCPT20
20
2.3
24
$14
FCPT22
22
2.5
24
$15
FCPT24
24
2.7
24
$15
VIBRATION ISOLATION
Wt. Each
(lbs.)
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Duct
Diameter
SPIRAL PIPE
& ACCESSORIES
Part
Number
FLEXIBLE DUCT /
SNAPLOCK & ACC.
FITTING COUPLING
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Wt. Each
(lbs.)
VAV TERMINALS /
HOT WATER COILS
Duct
Diameter
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Part
Number
VARIABLE SPEED
DRIVES & STARTERS
PIPE COUPLING
FANS / DAMPERS /
CURBS
SELF-SEALING SPIRAL PIPE FITTINGS
By Eastern Sheet Metal
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
SELF-SEALING SPIRAL PIPE FITTINGS
By Eastern Sheet Metal
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Above 12 in.
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
Thru 12 in.
Part
Number
Duct
Diameter
Wt. Each
(lbs.)
Ga.
Price Each
PE90T3
3
1.1
26
$45
PE90T4
4
1.7
26
$48
PE90T5
5
2.5
26
$53
PE90T6
6
3.4
26
$61
PE90T8
8
5.5
26
$74
PE90T10
10
8.2
26
$98
PE90T12
12
11.1
26
$119
E90T14
14
12.0
26
$135
E90T16
16
15.3
26
$155
E90T18
18
19.1
26
$191
E90T20
20
29.7
24
$248
E90T22
22
42.9
24
$284
E90T24
24
50.0
24
$335
45 DEG. ELBOW
Thru 12 in.
Above 12 in.
Part
Number
Duct
Diameter
Wt. Each
(lbs.)
Ga.
Price Each
PE45T3
3
0.6
26
$41
PE45T4
4
1.0
26
$42
PE45T5
5
1.4
26
$45
PE45T6
6
1.8
26
$49
PE45T8
8
3.0
26
$56
PE45T10
10
4.4
26
$69
PE45T12
12
6.0
26
$78
E45T14
14
6.6
26
$84
E45T16
16
8.4
26
$94
E45T18
18
10.3
26
$108
E45T20
20
16.0
24
$139
E45T22
22
19.0
24
$158
E45T24
24
22.3
24
$172
STEAM SPECIALTIES
VIBRATION ISOLATION
Eastern Sheet Metal
90 DEGREE ELBOW
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
66
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
67
Eastern Sheet Metal
Part
Number
Duct
Diameter
Wt. Each
(lbs.)
Ga.
Price Each
4 to 3
0.4
26
$31
5 to 3
0.6
26
$31
PRDT54
5 to 4
0.6
26
$31
PRDT64
6 to 4
0.9
26
$33
PRDT65
6 to 5
0.8
26
$33
PRDT86
8 to 6
1.4
26
$37
10 to 6
2.0
26
$41
10 to 8
1.8
26
$42
PRDT128
12 to 8
2.5
26
$45
PRDT1210
12 to 10
2.2
26
$45
14 to 8
4.9
26
$78
14 to 10
4.7
26
$80
RDT1412
14 to 12
4.9
26
$83
RDT1610
16 to 10
5.7
26
$86
RDT1612
16 to 12
5.4
26
$87
RDT1614
16 to 14
5.7
26
$90
RDT1812
18 to 12
6.5
26
$93
18 to 14
6.1
26
$93
18 to 16
6.4
26
$96
RDT2014
20 to 14
9.4
24
$110
RDT2016
20 to 16
8.7
24
$111
RDT2018
20 to 18
9.2
24
RDT2216
22 to 16
10.4
24
$113
$117
22 to 18
9.7
24
$118
22 to 20
10.1
24
$124
RDT2418
24 to 18
11.5
24
$126
RDT2420
24 to 20
10.7
24
$128
RDT2422
24 to 22
10.9
24
$131
•
•
•
•
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
MODEL DT ROUND SPIRAL DAMPER
22 ga. galvanized construction
Factory-mounted stand-off with locking hand quadrant
Designed for spiral duct balancing applications
Seal becomes part of ductwork
Wt. Each
(lbs.)
Ga.
Price
Each
DT6
6
2.1
22
$58
DT8
8
2.5
22
$62
DT10
10
2.9
22
$67
DT12
12
3.4
22
$71
DT14
14
3.8
22
$75
STEAM SPECIALTIES
Duct
Diameter
VIBRATION ISOLATION
Part
Number
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
SPIRAL PIPE
& ACCESSORIES
RDT2218
RDT2220
FLEXIBLE DUCT /
SNAPLOCK & ACC.
RDT1814
RDT1816
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
RDT148
RDT1410
VAV TERMINALS /
HOT WATER COILS
PRDT106
PRDT108
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
PRDT43
PRDT53
VARIABLE SPEED
DRIVES & STARTERS
CONCENTRIC REDUCER
FANS / DAMPERS /
CURBS
SELF-SEALING SPIRAL PIPE FITTINGS
By Eastern Sheet Metal
SELF-SEALING SPIRAL PIPE FITTINGS
By Eastern Sheet Metal
Eastern Sheet Metal
PRESSED TAP
Part
Number
Tap
Diameter
Duct
Diameter
Wt. Each
(lbs.)
Ga.
Price Each
PFTCT44
4
4
0.4
26
$25
PFTCT46
4
6
0.4
26
$25
PFTCT48
4
8
0.4
26
$25
PFTCT410
4
10
0.5
26
$25
PFTCT412
4
12
0.5
26
$25
PFTCT66
6
6
0.8
26
$27
PFTCT68
6
8
0.8
26
$27
PFTCT610
6
10
0.8
26
$27
PFTCT612
6
12
0.8
26
$27
PFTCT614
6
14
0.8
26
$27
PFTCT616
6
16
0.8
26
$27
PFTCT88
8
8
1.2
26
$31
PFTCT810
8
10
1.2
26
$31
PFTCT812
8
12
1.2
26
$31
PFTCT814
8
14
1.2
26
$31
PFTCT816
8
16
1.2
26
$31
PFTCT818
8
18
1.2
26
$31
PFTCT820
8
20
1.2
24
$31
PFTCT822
8
22
1.2
24
$31
PFTCT824
8
24
2.1
24
$31
PFTCT1010
10
10
2.1
26
$39
PFTCT1012
10
12
2.1
26
$39
PFTCT1014
10
14
2.1
26
$39
PFTCT1016
10
16
2.1
26
$39
PFTCT1018
10
18
2.1
26
$39
PFTCT1020
10
20
2.1
24
$39
PFTCT1022
10
22
2.1
24
$39
PFTCT1024
10
24
2.1
24
$39
PFTCT1212
12
12
2.7
26
$42
PFTCT1214
12
14
2.7
26
$42
PFTCT1216
12
16
2.7
26
$42
PFTCT1218
12
18
2.7
26
$42
PFTCT1220
12
20
2.7
24
$42
PFTCT1222
12
22
2.7
24
$42
PFTCT1224
12
24
2.7
24
$42
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
68
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
69
Eastern Sheet Metal
Ga.
Price Each
FTCT1414
14
14
11.5
26
$50
FTCT1416
14
16
12.7
26
$50
FTCT1418
14
18
13.9
26
$50
FTCT1420
14
20
19.3
24
$50
FTCT1422
14
22
20.8
24
$50
FTCT1424
14
24
22.4
24
$50
FTCT1616
16
16
13.8
26
$53
FTCT1618
16
18
15.1
26
$53
FTCT1620
16
20
20.9
24
$53
FTCT1622
16
22
22.5
24
$53
FTCT1624
16
24
24.2
24
$53
FTCT1818
18
18
16.2
26
$57
FTCT1820
18
20
22.5
24
$57
FTCT1822
18
22
24.3
24
$57
FTCT1824
18
24
26.0
24
$57
END CAP
Price Each
PECT3
3
0.3
26
$32
PECT4
4
0.4
26
$32
PECT5
5
0.6
26
$35
PECT6
6
0.7
26
$35
PECT8
8
1.0
26
$37
PECT10
10
1.4
26
$47
PECT12
12
1.8
26
$47
ECT14
14
2.6
26
$56
ECT16
16
3.1
26
$61
ECT18
18
3.7
26
$65
ECT20
20
5.5
24
$74
ECT22
22
6.4
24
$80
ECT24
24
7.3
24
$86
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
Ga.
VIBRATION ISOLATION
Wt. Each
(lbs.)
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Above 12 in.
Duct
Diameter
SPIRAL PIPE
& ACCESSORIES
Thru 12 in.
Part
Number
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Wt. Each
(lbs.)
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Duct
Diameter
VAV TERMINALS /
HOT WATER COILS
Tap
Diameter
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Part
Number
VARIABLE SPEED
DRIVES & STARTERS
CONICAL TAP
FANS / DAMPERS /
CURBS
SELF-SEALING SPIRAL PIPE FITTINGS
By Eastern Sheet Metal
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
70
SELF-SEALING SPIRAL PIPE FITTINGS
By Eastern Sheet Metal
Eastern Sheet Metal
Y-BRANCH
Part
Number
Duct
Diameter
Wt. Each
(lbs.)
Ga.
Price Each
YT3
3
1.6
26
$72
YT4
4
2.4
26
$78
YT5
5
3.3
26
$86
YT6
6
4.4
26
$93
YT8
8
6.8
26
$111
YT10
10
9.8
26
$132
YT12
12
13.3
26
$153
YT14
14
17.4
26
$177
YT16
16
22.0
26
$201
YT18
18
27.1
26
$227
YT20
20
41.7
24
$287
YT22
22
49.5
24
$324
YT24
24
58.0
24
$375
Part
Number
Duct
Diameter
Wt. Each
(lbs.)
Ga.
Price Each
TT3
3x3x3
1.4
26
$50
TT4
4x4x4
2
26
$52
TT5
5x5x5
3
26
$56
TT6
6x6x6
3.2
26
$59
TT8
8x8x8
4.5
26
$67
TT10
10x10x10
6
26
$75
TT12
12x12x12
7.8
26
$86
TT14
14x14x14
9.6
26
$98
TT16
16x16x16
11.7
26
$108
TT18
18x18x18
13.9
26
$119
TT20
20x20x20
20.8
24
$170
TT22
22x22x22
24.1
24
$184
TT24
24x24x24
27.6
24
$199
TEE
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
71
FANS / DAMPERS /
CURBS
SPIRAL HANGING SYSTEMS
Gripple hangers incorporate a length of pre-cut cable with a pre-fabricated end fixing for maximum speed, efficiency and safety.
Part Number
Loop Hanger Size 2 100 lbs
10 ft
$11
HF02-15
Loop Hanger Size 2 100 lbs
15 ft
$12
HF02-20
Loop Hanger Size 2 100 lbs
20 ft
$14
HF02-30
Loop Hanger Size 2 100 lbs
30 ft
$18
HF03-5
Loop Hanger Size 3 200 lbs
5 ft
$11
HF03-10
Loop Hanger Size 3 200 lbs
10 ft
$13
HF03-15
Loop Hanger Size 3 200 lbs
15 ft
$15
HF03-20
Loop Hanger Size 3 200 lbs
20 ft
$17
HF03-30
Loop Hanger Size 3 200 lbs
30 ft
$21
XP02-10
Loop Hanger Size 2 100 lbs with Button
10 ft
$12
XP02-20
Loop Hanger Size 2 100 lbs with Button
20 ft
$15
DT2-LG-10
Duct Trapeze Loop Hanger 100 lbs
10 ft
$12
DT2-LG-15
Duct Trapeze Loop Hanger 100 lbs
15 ft
$14
DT2-LG-20
Duct Trapeze Loop Hanger 100 lbs
20 ft
$15
DT2-LG-30
Duct Trapeze Loop Hanger 100 lbs
30 ft
$19
HF-SG-3/8-NO 2
Stud Hanger Size 2 100 lbs
10 ft
$11
HF-SG-3/8-NO 2
Stud Hanger Size 2 100 lbs
15 ft
$13
HF-SG-3/8-NO 3
Stud Hanger Size 3 200 lbs
10 ft
$13
HF-SG-3/8-NO 3
Stud Hanger Size 3 200 lbs
15 ft
$16
HF-SG-3/8-NO 3
Stud Hanger Size 3 200 lbs
30 ft
$22
Cutter
Wire Rope Cutter
$38
TOOL-4-5BX
Tensioning Tool
$129
* Cable Kits Sold 10 Per Bag (Minimum Purchase 1 Bag)
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
HF02-10
VIBRATION ISOLATION
$9
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
5 ft
SPIRAL PIPE
& ACCESSORIES
Tensioning Tool
Loop Hanger Size 2 100 lbs
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Cutter
HF02-5
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Duct Trapeze Loop Hanger
* Price Per
Hanger
VAV TERMINALS /
HOT WATER COILS
XP Loop Hanger
Length
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Gripple Lock
Description
VARIABLE SPEED
DRIVES & STARTERS
GRIPPLE HANGING SYSTEMS
Part Number
Part Number
Description
Description
Description
S
T
O
Load
Range
Price
Each
Load
Range
Price
Each
C
Load Range
Price Each
K
GC
$39GC
$1.50
GC
GC
C1032
C1032
C1042 C1032
C1042
C1062 C1042
C1062
C1082 C1062
C1082
C10102 C1082
C10122
3"Gate
Blast Gate
3” Blast
3” Blast
4"Gate
Blast
GateGate
4” Blast
4” Blast
6"Gate
Blast
GateGate
6” Blast
6”
Blast
8"Gate
Blast GateGate
8” Blast
8” Blast
10" Blast
GateGate
12" Blast Gate
K
$12
$14
$21
$36
$14
$15
$22
$37
$87
$93
G
$12G
$14G
$21G
$36
S
T
O
C
K
G
G
G
G
VRV & ACCESSORIES
Prices
subjectIN:
to change
without notice.
HoffmanWarehouse
Warehouse, freight
andWarehouse
added to invoice.
All shipments are
G - Greensboro
Warehouse
C - FOB
Columbia
K - prepaid
Knoxville
STOCKED
IN: G notice.
- Greensboro
Warehouse
C - Columbia
Warehouse
K invoice.
- Knoxville Warehouse
All shipments
are FOB Greensboro,
freight prepaid
and added to
Prices subjectSTOCKED
to change without
Prices subject to change without notice. All shipments are FOB Greensboro, freight prepaid and added to invoice.
S
T
O
PricePrice
PriceC
STEAM SPECIALTIES
Description
Description
Description
VIBRATION ISOLATION
Part
Number
Part
Number
Part Number
FILTERS & ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
BLAST
GATES
BLAST
GATES
The standard FULL cut off is an aluminum cast housing to which collars have been “screwed”.
The standard FULL cut off is an aluminum cast housing to which collars have been “screwed”.
The screw is then ground off on the inside to keep it out of the air stream.
The screw is then ground off on the inside to keep it out of the air stream.
& ACCESSORIES
Strapping
Width20
20ga.
ga.100
100ft.ft.
320
$58
1”1”Width
320
lb lb
$39
1” Width
ga. 100 ft. 660
Bracket StrappingAccepts
Accepts5/16”
5/16”
3/8”20
Rod
660
$3
- -3/8”
Rod
lb lb 320 lb $1.50
Bracket
Accepts 5/16” - 3/8” Rod
660 lb
S
T
O
C
K
VARIABLE SPEED
DRIVES & STARTERS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VAV TERMINALS /
HOT WATER COILS
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
SNAPLOCK & ACC.
With this system the steel strap is hand bent into the bracket which is self loading. Can be used
with 5/16” - 3/8” rod.
with 5/16” - 3/8” rod.
ACCESS DOORS / ACTUATORS
STRAPPING
SYSTEM
STRAPPING
SYSTEM
With this system the steel strap is hand bent into the bracket which is self loading. Can be used
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
GC
GC
G
GC
GC
GC
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
GC
$2
$5 G
$3
$112
GC
$126
GC
$149
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Cable Lock
WC3
$4
WC3
$2
WC3 GC $7
WC4
Cable LockCable Lock
WC4-WC6
Cable
Lock
Cable Lock
WC6 WC4-WC6 $10
Bracket Assembly
with
CL12
WC3
$3
Bracket
Assembly
with
CL12
WC3GC $5
Assembly
with
CL12
WC3
Bracket
3/32” Wire Rope 500 Ft. Roll
150 lb
Wire
Rope
3/32”
Wire3/32”
Rope500
500Ft.
Ft.Roll
Roll500 Ft. Roll 250
150lblb 150 lb $126
$225
1/8” Wire
Rope
1/8”
Wire
Rope
500
Ft.
Roll
1/8” Wire
250lblb 250 lb $149
$253
3/16”
Wire Rope
Rope 500
250 Ft.
Ft. Roll
Roll
640
3/16” Wire3/16”
RopeWire
250 Rope
Ft. Roll250 Ft. Roll 640 lb 640 lb $300
S
T
O
C
K
HOT WATER COILS
CL12
CL23
KV12
WC3
WC4
WC6
LoadRange
Range
PriceEach
Each
Load
Price
Load Range
Price
VAV TERMINALS /
HOT WATER COILS
CL12
CL12
CL18
CL23
CL23
KV12
KV12
WC3
WC3
WC4
WC4
WC6
WC6
Description
Description
DIFFUSERS / TRANSITIONS
Part
Number
Part Number
Part Number
S
T
O
C
Each
K
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VIBRATION ISOLATION
The Dyna-Tite CL23 cable lock and wire rope system is the newest, fastest, and most reliable
way to secure ductwork and equipment. With this system the height of the unit can be adjusted
way to secure ductwork and equipment. With this system the height of the unit can be adjusted
without any tools. Galvanized construction.
without any tools. Galvanized construction.
DRIVES & STARTERS
DYNA-TITE
CABLE
SYSTEM
CABLE
SYSTEM
DYNA-TITE
The Dyna-Tite CL23 cable lock and wire rope system is the newest, fastest, and most reliable
VARIABLE SPEED
DRIVES & STARTERS
STEAM SPECIALTIES
SPIRAL
HANGING
SYSTEMS
ANDAND
BLAST
GATES
SPIRAL
HANGING
SYSTEMS
BLAST
GATES
CURBS
FANS / DAMPERS /
CURBS
FANS / DAMPERS /
CURBS
72
73
Model
KW
BTUH (000)
Heater
Voltage
Control (1)
Voltage
Price Each
3/1
3/1
3/1
3/1
1
1
3
3
3
3
3
3
$725
$758
$1167
$1286
$725
$758
$924
$1002
$1258
$1333
$2151
$2841
ACCESSORIES
Price
Each
SPIRAL PIPE
& ACCESSORIES
Description
For Use With:
A5105
A5120
V5105
V5120
T5100
T5102
TW1512
S2022H10AB
RK120EAA
DCS202/5100
DCS403/5100
DCS603/5100
Horizontal Mounting Bracket
Horizontal Mounting Bracket
Vertical Mounting Bracket
Vertical Mounting Bracket
3.3 & 5.0 KW Heaters
7.5 - 20 KW Heaters
3.3 - 5.0 KW Heaters
7.5 - 20 KW Heaters
for all except HF2B5103, 05 3 ph
Field installed internal t’stat
Field installed internal t’stat
HD line voltage wall t’stat
Line voltage wall t’stat
Low voltage wall t’stat
HF2B5103,05 3 ph
3 phase heaters
1 phase heaters
24V control units
Power Disconnect Switch
Power Disconnect Switch
Power Disconnect Switch
2 Pole; 20 AMP; 120-277 VAC
3 Pole; 40 AMP; 120-600 VAC
3 Pole; 60 AMP; 600 VAC
$105
$120
$202
$250
$125
$169
$198
$34
$19
$138
$331
$453
SPIRAL PIPE
& ACCESSORIES
MARKEL FAN FORCED ELECTRIC WALL HEATERS
VIBRATION ISOLATION
Heavy duty heaters include finned tubular heating elements and
tamper-proof grille with built-in overheat protection disconnect and
thermostat. Rough-in dimensions are 14 3/16” wide x 19 15/16”
high and 4” deep. Heater and wall box are packed and shipped
together. Optional sleeve available for surface mounting.
KW
BTUH
Voltage/Phase
Price Each
E3323
HF3323
HF3324
HF3325
HF3326
G3324
G3325
G3326
1.5
1.125/1.5
1.5/2.0
2.25/3.0
3.0/4.0
2.0
3.0
4.0
5120
3840/5120
5120/6284
7763/10,350
10,350/13,800
6284
10,350
13,800
120/1
208/240/1
208/240/1
208/240/1
208/240/1
277/1
277/1
277/1
$628
$639
$639
$639
$639
$638
$638
$638
VIBRATION ISOLATION
STEAM SPECIALTIES
Model
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Model
FLEXIBLE DUCT /
SNAPLOCK & ACC.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
HF2B5103
2.5/3.3
8.5/11.2
208/240
208/240
HF2B5105
3.7/5.0
12.8/17.1
208/240
208/240
HF2B5107CA1
5.6/7.5
19.2/25.6
208/240
24
HF2B5110CA1
7.5/10.0
25.6/34.1
208/240
24
G1G5103
3.3
11.2
277
277
G1G5105
5.0
17.1
277
277
P3P5103CA1
3.3
11.2
480
24
P3P5105CA1
5.0
17.1
480
24
P3P5107CA1
7.5
25.6
480
24
P3P5110CA1
10.0
34.1
480
24
P3P5115CA1
15.0
51.2
480
24
P3P5120CA1
20.0
68.3
480
24
Notes:
(1) 24-volt control units are supplied with low voltage control transformer and contactor.
(2) Single or three-phase wiring on dual phase units is field interchangeable.
VAV TERMINALS /
HOT WATER COILS
Phase (2)
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Heaters are for vertical or horizontal mounting and
include shock-proof finned tubular heating elements
with built-in thermal cut-outs, individually adjustable
outlet louvers and totally enclosed, permanently
lubricated fan motors. Motors and line power supply
are same voltage. Outward drawn discharge venturi
enhances air flow. No disconnect.
VAV TERMINALS /
HOT WATER COILS
e used
d”.
MARKEL SERIES 5100 UNIT HEATERS
VARIABLE SPEED
DRIVES & STARTERS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
GC
GC
G
GC
GC
GC
VARIABLE SPEED
DRIVES & STARTERS
S
T
O
C
K
FANS / DAMPERS /
CURBS
FANS / DAMPERS /
CURBS
eliable
justed
ELECTRIC HEATERS
By Markel
ACCESSORIES
Description
Price Each
3320EX33
3310
Surface Mounting Sleeve
Rough-In Box For Advance Installation
$91
$100
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
VRV & ACCESSORIES
Model
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
74
AIR FILTRATION
PLEATED PREFILTERS
• Pleated design increases dust holding capacity
• Extended replacement intervals
DIMENSIONAL DATA AND PRICES
Nominal Size
Actual Size
Filters Per Case
Price Each
20 x 20 x 1
19 1/2 x 19 1/2 x 3/4
12
$5
16 x 20 x 2
15 1/2 x 19 1/2 x 1 3/4
12
$5
20 x 20 x 2
19 /2 x 19 /2 x 1 /4
12
$5
16 x 25 x 2
16 1/2 x 24 1/2 x 1 3/4
12
$5
20 x 25 x 2
19 /2 x 24 /2 x 1 /4
12
$6
12 x 24 x 2
11 3/8 x 23 3/8 x 1 3/4
12
$4
24 x 24 x 2
23 /8 x 23 /8 x 1 /4
12
$7
12 x 24 x 4
11 3/8 x 23 3/8 x 3 3/4
12
$7
24 x 24 x 4
23 /8 x 23 /8 x 3 /4
6
$12
1
1
1
3
1
3
3
3
3
3
3
3
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Increases service life of secondary filters
Model
Nominal Size
Actual Size
Filters Per Case
Price Each
95PH
12 x 24 x 12
11 3/8 x 23 3/8 x 11 1/2
2
$68
95PH
24 x 24 x 12
23 /8 x 23 /8 x 11 /2
1
$97
3
3
1
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
DIMENSIONAL DATA AND PRICES
FILTER MEDIA ROLLS
Nominal Size
Description
Price Each
24 X 90 X 3/4
Merv 7 Filter Media Roll
$77
36 X 90 X 3/4
Merv 7 Filter Media Roll
$112
60 X 90 X 1
Merv 8 Filter Media Roll
$207
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
75
FANS / DAMPERS /
CURBS
FILTER FRAMES AND FASTENERS
• Variety of fasteners enables use with 1", 2" and 4"
panel filters
• Galvanized construction
Frame Size
Price Each
12 x 24
$33
24 x 24
$37
Fastener Used to Secure
Qty. Required
per Filter
Price Each
CC611
Up or Down
1” or 2” deep filter
4
$1
WF611
Up or Down
4” deep filter
4
$2
PFC-2
Up
2” deep 30% as a prefilter to a cartridge (no header)
4
$1
PFC-4
Up
4” deep 30% as a prefilter to a cartridge (no header)
4
$1
PCA-2
Up or Down
2” deep filter
4
$2
PCA-3
Up or Down
2” deep 30% as a prefilter to a cartridge
4
$2
PCA-4
Up or Down
4” deep filter
4
$2
PCA-5
Up or Down
4” deep 30% as a prefilter to a cartridge
4
$2
12611
Up or Down
12” cartridge without prefilter
4
$5
FLEXIBLE DUCT /
SNAPLOCK & ACC.
MAGNEHELIC PRESSURE GAUGES
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Upstream or
Downstream
VAV TERMINALS /
HOT WATER COILS
Fastener
Model No.
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Also accepts 6" and 12" deep cartridge filters
VARIABLE SPEED
DRIVES & STARTERS
• Universal holding frame accommodates wide range
of filter sizes and types
DWYER SERIES 2000 MAGNEHELIC GAUGES
• 1/8" NPT plugs for duplicate pressure taps
Model No.
Range
Price Each
• Use accessory A-605 to convert for use as air
filter gauge
2001
0 - 1.0”
$99
2002
0 - 2.0”
$99
2006
0 - 6.0”
$99
A-605
N/A
$62
DWYER MARK II MOLDED PLASTIC MANOMETER
Model
Price Each
Manometer No. 25
Range .05 - 3”
$59
A-310A
3-way vent valve (2 per gauge)
$29
A-101
Red Gauge Oil, .826 sp. gr.
$13
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
Description
VIBRATION ISOLATION
• Includes 8 ft. flexible, double column, plastic tubing, 2 connector fittings for 1/8" pipe thread, mounting
screws, 3/4 oz. gauge oil
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
MANOMETERS
SPIRAL PIPE
& ACCESSORIES
• Includes rubber tubing adapters, flush mounting
lugs and necessary screws
SIDE ACCESS FILTER HOUSINGS
• Unprecedented versatility and ease of maintenance
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
76
• Two stage filtration using pleated pre-filters and high efficiency
rigid filters
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
• Constructed of durable 16 ga. galvanized construction for indoor
or outdoor installation
• Pressure capability up to 3 in. WG positive or negative
• Access doors on both sides of housing for filter changeout from
either side
• Fully gasketed doors and tracks
• Filters slide into tracks. No need for holding frames or fasteners
DIMENSIONAL DATA AND PRICES
Model
Actual Size
1x1
23 3/8”W x 27 1/4”H
(1) - 24 x 24 x 2
1x2
46 /4”W x 27 /4”H
(2) - 24 x 24 x 2
3
1
Price Each
S
T
O
C
K
(1) - 24 x 24 x 12
$828
G
(2) - 24 x 24 x 12
$1133
G
Prefilters Required Per Unit Cartridge Filters Required Per Unit
TOP VIEW
SIDE VIEW
FLANGE
WIDTH
STEAM SPECIALTIES
1.00 TYP
1.5 TYP
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
• Housing can accommodate both 6 in. cartridge filters (not stocked)
and 12 in. cartridge filters (stocked)
FLANGE
HEIGHT
FRONT VIEW
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
77
FANS / DAMPERS /
CURBS
VIBRATION MOUNTINGS
VARIABLE SPEED
DRIVES & STARTERS
STEEL SPRING MOUNTINGS
• Types BE & CE-1 are single spring mountings including enclosed cast housings and external adjustment bolt
CE-1
BE
Spring Size
Price Each
BE
C50-C370
$61
CE-1
D120-D510
$84
CE-1
D675-D1360
$92
Note: See Spring Chart on page 78 for maximum load.
VAV TERMINALS /
HOT WATER COILS
Series BE & CE
• Type CE-2 mounts include two springs and maximum load is two times values in chart for a single spring
Type
Spring Size
Price Each
CE-2
D510
$123
CE-2
D675-D1360
$139
Series CE-2
TYPE ASCB
SPIRAL PIPE
& ACCESSORIES
• Type ASC is a free-standing, laterally stable spring mounting with built-in leveling bolt.
• The ASCB mount is similar to the ASC above except the bottom cup is bonded to a 4 1/2 x 2 1/2 steel plate.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Note: See Spring Chart on page 78 for maximum load.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
CE-2
TYPE ASC
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Type
Spring Size
Price Each
ASC
C50-C370
$38
ASCB
C50-C370
$46
Note: See Spring Chart on Page 78 for maximum load.
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
Type
Series ASC
VIBRATION ISOLATION
ASC & ASCB Dimensions: in. (mm)
A
B
41/2”
23/8”
(60.3)
(50.8)
(16.0)
(9.5)
L
W
T
R
S
41/2”
21/2”
/8”
31/2”
(114.3)
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
(114.3)
(63.5)
2”
1
(3.18)
D
5
/8”
(89.0)
E
3
7
/8”
/16”
(11.2)
V
1
/2”
(12.7)
STEAM SPECIALTIES
Series ASCB
C
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
78
VIBRATION MOUNTINGS
MODEL HS SPRING-FLEX HANGERS
Type HS hangers incorporate a steel spring in series with a neoprene noise isolation washer. The HS-1D housings are 7" high and can accommodate
up to 3/4" diameter hanger rods. The HS-1B housings (assembled) are 4 1/2" high and accommodate up to 3/8" diameter hanger rods. All other HS-1C
housings are 5 1/2" high and can accommodate up to 5/8" diameter rods.
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
HS Dimensions: in. (mm)
TYPE & SIZE
VAV TERMINALS /
HOT WATER COILS
B
C
HS-1B-B20-B85
21/4” (57.5) 23/4” (69.8)
HS-1C-C50-C370
21/4” (57.5)
HS-1D-D120-D1360
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
FLEXIBLE DUCT /
SNAPLOCK & ACC.
SPIRAL PIPE
& ACCESSORIES
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
VIBRATION ISOLATION
STEAM SPECIALTIES
A
3”
(76.2)
Type
Spring Size
Price
Each
HS-1B
B20-B85
3”
(76.2)
D
/16” (14.2)
9
/16” (20.6)
23/4” (69.8)
51/2”
215/16”
(139.7)
11/4”
/8”
3
(9.5)
/8”
5
(76.0)
7”
(31.75)
F
41/2”
(114.3)
13
31/4” (76.2)
E
(15.8)
43/8”
(177.8)
/4”
3
(114.0)
(19.0)
UNIVERSAL SPRING CHART
$20
Spring
Number
T1B-20
Spring
Color
Blue
2 1/2”
Max Load
Lbs.
20
Black
2 1/2”
35
Size
HS-1C
C50-C370
$30
T1B-35
HS-1D
D120-D510
$40
T1B-50
Red
2 1/2”
50
$48
T1B-70
Green
2 1/2”
70
T1B-85
Gray
2 1/2”
85
T1C-50
Blue
2 3/4”
50
T1C-100
Tan
2 3/4”
100
T1C-150
Red
2 3/4”
150
T1C-250
Black
2 3/4”
250
T1C-370
Yellow
2 3/4”
370
HS-1D
D675-D1360
MODEL HRS
SPRING-FLEX HANGERS
Type HRS hangers combine a steel spring with a neoprene hanger element. The spring
isolates low frequency mechanical vibration and the neoprene element provides excellent
sound attenuation. HRS-1D housings are 10" high and can accommodate up to 3/4" hanger
rods. HRS-1B housings (assembled) are 5 1/4" high and accommodate up to 3/8" diameter
rods. All other HRS-1C housings are 7" high and can accommodate up to 5/8" diameter rods.
Type
Spring Size
Price
Each
HRS-1B
B20-B85
$30
HRS-1C
C50-C370
$56
HRS-1D
D120-D510
$78
HRS-1D
D675-D1360
$86
T1D-120
Black
4”
120
T1D-175
Blue
4”
175
T1D-250
Yellow
4”
250
T1D-340
Red
4”
340
T1D-510
Black
4”
510
T1D-675
Purple
4”
675
T1D-900
Green
4”
900
T1D-1200
Gray
4”
1200
T1D-1360
White
4”
1360
HRS Dimensions: in. (mm)
TYPE & SIZE
A
B
C
D
HRS-1B-B20-B85
21/4”
23/4”
(69.8)
51/4”
(133.3)
27/8”
HRS-1C-C50-C370
3”
31/4”
7”
3”
33/4”
HRS-1D-D120-D1360
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
(75.0)
(76.2)
(76.2)
(95.2)
(95.2)
(177.8)
10”
(254.0)
E
/16”
F
/8”
15
3
(73.0)
(23.8)
(9.5)
3”
111/16”
43/8”
21/8”
(76.2)
(111.0)
(47.8)
(53.9)
5
/8”
(15.8)
3
/4”
(19.0)
79
FANS / DAMPERS /
CURBS
VIBRATION MOUNTINGS
Max Load
Blue
Max Load
Black
Max Load
Red
Max Load
Green
Price Each
HR-A
35 lbs
45 lbs
75 lbs
120 lbs
$12
HR-B
––
170 lbs
240 lbs
380 lbs
$34
HR Dimensions: in. (mm)
Type
L
W
21/4”
HR-A
(50.8)
3”
21/4”
(76.2)
(57.2)
A*
AD*
3”
C
11/8”
(28.6)
13/8”
(76.2)
41/2”
13/8”
17/8”
(47.8)
(16.0)
(114.3)
3
(35.0)
(35.0)
/8”
(9.6)
5
/8”
VAV TERMINALS /
HOT WATER COILS
HR-B
2”
(57.2)
H
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Type
VARIABLE SPEED
DRIVES & STARTERS
NEOPRENE-IN-SHEAR HANGERS
NEOPRENE-IN-SHEAR MOUNTINGS
Max Load
Black
Max Load
Red
Max Load
Green
Max Load
Gray
Price Each
R-1
35 lbs
45 lbs
70 lbs
120 lbs
––
$19
R-2
135 lbs
170 lbs
240 lbs
380 lbs
––
$21
R-3
––
250 lbs
525 lbs
750 lbs
1100 lbs
$49
R Dimensions: in. (mm)
W
R-1
3 /8”
1 /4”
1” (25.4)
1 /4”
R-2
37/8”
23/8”
11/4”
13/4”
51/2”
33/8”
13/4”
21/2”
R-3
1
(79.4)
(98.6)
(139.7)
3
(44.4)
(60.4)
(85.8)
H
(31.7)
(44.4)
A
1
(31.7)
(44.4)
(63.5)
B
C
/16”
2 /8”
/8”
3” (76.2)
5
3
(8.0)
3
(9.6)
/2”
(60.4)
1
(12.7)
41/8”
(104.8)
D
E
/32”
3
/16”
/32”
7
11
(8.8)
(4.8)
/32”
11
(8.8)
(5.6)
/16”
/4”
9
1
(14.4)
(6.3)
ELASTOMERIC & SHEAR-FLEX PADS
Price Each
18” x 18” x 1”
$172
6” x 6” x 1”
$19
4” x 4” x 1”
$9
2” x 2” x 1”
$2
SHEAR-FLEX PADS
Price Each
18” x 18” x 3/8”
$100
STEAM SPECIALTIES
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
Size
VIBRATION ISOLATION
Size
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
ELASTOMERIC PADS
SPIRAL PIPE
& ACCESSORIES
L
Type
FLEXIBLE DUCT /
SNAPLOCK & ACC.
Max Load
Blue
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Type
STEAM SPECIALTIES
VIBRATION ISOLATION
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
80
SPIRAX SARCO PRESSURE REDUCING VALVES
25 SERIES PILOT & TEMPERATURE OPERATED REGULATORS
Efficient, reliable and accurate, no other regulator contains as many quality
features as the 25 Series. Whether it is used for regulating temperatures,
pressure, or both, it is responsive and exact. Designed with the user in mind,
it is more versatile than any regulator available to the industry.
MAIN VALVE
Main Valve Type
PRESSURE PILOT
Pressure Pilot
Type
Downstream
Pressure
Price Each
25-P Yellow
3-30 psig
$637
25-P Blue
20-100 psig
$637
25-P Red
80-250 psig
$637
How self acting temperature regulators work
HOW THE 25T PILOT REGULATOR WORKS
25
Size
Price Each
1/2”
$945
3/4”
$1028
1”
$1157
1 1/4”
$1415
1 1/2”
$1745
2”
$2249
TEMPERATURE PILOT
Temperature
Pilot Type
Temperature
Range
Price Each
The Spirax Heating
Sarco pilot
Cooling
$1503
100-160°F
operated temperature
Flow
T2
$1503
120-180°F
Pilot
regulator works by converting
Bellows
Movement
caused
by
the process temperaturetemperature
to a change
$1503
160-220°F
at sensor
Control Spring
How self acting pressure regulators work
Orifice
force
which
is
balanced
by
the
Pilot Valve
Plug
Bulb
Head & Seat
control spring.Plug
This modulates
HOW THE 25P PILOT REGULATOR WORKS
Pressure Adjustment
a small valve
over a seat
The Spriax Sarco pilot Adjustment
Thrusthead
Pin
Thrust
Handwheel
Flow
Pin
Sensor
(theTemperature
pilot). The
flow through
operated
pressure
regulator
Main Valve
Control Spring
Head & Seat
this seat is directed in turn
Pilot
works by balancing the Control Spring
Spring loaded piston
Diaphragm
Control
mechanism
for
temperature
to theadjustment
mainandvalve
diaphragm,
Pressure
overload
downstream pressure
Main Valve
Pilot Valve
where it modulates the main
against
a control spring. This Bellows
Diaphragm
Head & Seat
Pushrod
Orifice
Downstream
valve.
Pressure
modulates a small valve
Sensing
How the 25T pilot regulator works
How direct operated temperature
Line
In order
to achieve the most stable operating condition,
the sensing
bulb
regulators work
head
over a seat (the pilot).
The Spirax Sarco pilot operated temperature regulator
works by
the process
temperature
to a forcemedium. This
must
beconverting
immersed
entirely
in the sensed
allows
the liquid
in sensor willFlow
Flow
A change
in temperature
at the
cause the
The flow
through this seat is
which is balanced by the control spring. This modulates a
liquid filling to expand or contract. If the liquid expands it
Main Valve
the
expand
through
theThe
capillary
tubing intowillthe
bellows
and
throttles
smallbulb
valve to
head
over a seat
(the pilot).
flow through
Head
&
Seat
apply a force on the thrust pin which, in turn, will cause
directed,
in
turn, to the main
this seat is directed in turn to the main valve diaphragm,
the valve plug to move. As the liquid contracts,
the
force
Control
the
valve.the
This
settles
constant flow across the
Return Spring
wherepilot
it modulates
main
valve. the pilot valve, allowing
on the valve plug reduces and a spring reverses
Pressure its
Main
Valve
valve
diaphragm,
where it
In order to achieve the most stable operating
direction
of
travel.
main
diaphragm.
Head & Seat
Main Valve
condition,
the sensing bulb must be immersed entirely in
For heating applications, the valves will normally be
Diaphragm
modulates the main valve.
the sensed medium. This allows the liquid in the bulb to
opencloses,
and will close
a rise in
When process temperature rises, the pilot valve
andagainst
pressure
istemperature.
expand through the capillary tubing into the bellows and
For cooling applications, the valves will normally be
How
Howan
the
25P
pilot
regulator
works
direct
operated
regulators work
In order to achieve the most stable
operating condition,
external
pressure
throttles thefrom
pilot the
valve.
This valve
settlesdiaphragm
the pilot valve,
closed
and will open
against
aclose
rise in temperature.
released
main
through
the
control
orifice
to
allowing constant flow across the main diaphragm.
The Spirax Sarco pilot operated pressure regulator
On start-up, upstream pressure, aided by a return
sensing
mustthebedownstream
used. This
allows
downstream
pressure
to feed
back the
to seat in the closed
When
rises, the
pilot valve
works byline
balancing
pressure
against
a
spring,
holds the valve
head against
to order
the
mainprocess
valve.temperature
Any variations
in temperature
will immediately How
be sensed
closes, and pressure is released from the main valve
spring. This modulates a small valve head over a
position.
When
ordering
amain
Spirax valve,
Sarco 121 temperature
thecontrol
underside
of the
diaphragm,
force, causing
diaphragm
through
the control
orifice
close the
seat
(the pilot). The
flow through
this seat balancing
is directed, in the spring
Downstream
pressure the
is setpilot
by rotating the hand
on
the bulb,
which
will act
to toadjust
themain
position ofregulator,
the
pilot
and
include all of the following:
valve. Any variations in temperature will immediately be
turn, to the main valve diaphragm, where it modulates
wheel in a clockwise direction which compresses the
valve to throttle. This settles the pilot valve, allowing
constant
flowtheacross
control aspring
and extends
bellows. This downward
sensed on the
which will
act to adjust
the position of
ensuring
a bulb,
constant
process
temperature.
• Valve size by nominal pipe/flange size the main valve.
In order to achieve the most stable operating
movement is transmitted via a push rod which causes
the pilot and main valve, ensuring a constant process
• Body material of cast iron or cast steelthe
main an
diaphragm.
This
ensures
that
the mainthe
valve
is also
settled to give
condition,
external pressure
sensing
line must
be used.
main valve
to open.
HOW TO ORDER
temperature.
• Type of sensor - 121 for thermostatic regulation
This allows downstream pressure to feed back to the
Steam then passes through the open valve into the
• Style ofinclude
thermostatic
or union nuta stable
underside
of the pilot diaphragm,
balancing the spring
downstream pipework and also surrounds the bellows.
downstream
pressure.
When ordering How
a Spirax
Sarco 25T temperature regulator,
all bulb
of the
to order
• Length of capillary tubing
force, causing the pilot valve to throttle. This settles the
As downstream pressure increases, it acts through
• Temperature adjustment range
When ordering a Spirax Sarco 25T temperature
pilot
valve,
allowing a constant
flow across
thethe
mainpilot valve
the bellows
to counteract
the spring force
following:
When
downstream
pressure
rises,
closes,
and pressure
is and closes the
• Maximum steam supply pressure
diaphragm. This enures that the main valve is also settled
main valve when the set pressure is reached. The main
regulator, include all of the following:
• Intended application
to
give
a
stable
downstream
pressure.
valve
modulates
to
give
constant
pressure.
• Valve
size
by
nominal
pipe/flange
size
released
from the main valve diaphragm through the control orifice, to close
• Valve size by nominal pipe/flange size
When downstream pressure rises, the pilot valve
• Bodymaterial
material of cast
iron oriron
cast or
steel
tosensed
order
Howbe
closes,
and pressure is released from the main valve
For example: Spirax Sarco 1" Cast Iron
Screwed
• Body
of cast
cast steel
the
main
valve. Any variations in load or pressure will immediately
• Type of sensor - 25T for thermostatic regulation
diaphragm
Regulator with 121 Regulator having temperature setthrough the control orifice, to close the main
When ordering a Spirax Sarco BRV2, include the
• Styleof
of thermostatic
bulbfor thermostatic regulationvalue of 180°F, 13 ft. capillary, and bulb with
valve.
Any
variations in load or pressure will immediately
• Type
senor
25T
3/4"
NPT
following:
onbethe
pilotondiaphragm,
which
acttotoadjust
adjust the position of the main valve,
• Length of capillary tubing
sensed
the pilot diaphragm,
whichwill
will act
union nut.
the position of the main valve, ensuring a constant
• Valve size and connection type
• Temperature
adjustment range
• Style
of thermostatic
bulb
ensuring
a pressure.
constant downstream pressure.
downstream
• Body material, e.g. cast iron
• Maximum steam supply pressure. Specify low
• Set range for downstream pressure
pressureofpilot
when inlettubing
pressure for flanged
• Length
capillary
How to order HOW TO ORDER
• Steam supply pressure
sizes is 15 psig or below.
• Temperature
adjustment range
• Intended application
When
ordering a
a Spirax
Sarco
25P regulator,
include
When
ordering
Spirax
Sarco
25P regulator,
include
all of Spirax
the following:
For example:
Sarco 1/2" NPT Ductile Iron BRVS.
the following:
Steam supply pressure, 100 psig. Set pressure, 50 psig.
•ForMaximum
steam
supply
pressure.
Specify low pressure pilot when inlet
example: Spirax
Sarco
1" Cast
Iron Temperature
sizeand
and connection
type type
• Valve
• Valve
size
connection
Regulator, Type 25T-2 with 8 feet of tubing, temperature
• Body material, e.g. cast iron
pressure
flanged
is for
15storage
psig or
below
range
of 120° tofor
180°F,
75 psigsize
steam,
water
• Setmaterial,
range for downstream
pressure
• Body
e.g. cast
iron
• Steam supply pressure
•heater.
Intended application
• For
Setexample:
rangeSpirax
for downstream
pressure
Sarco 1" Cast Iron Pressure
For example: Spirax Sarco 1” Cast Iron Temperature Regulator, Type 25T-2
7 Type 25P for 150 psig inlet pressure, yellow
• Regulator,
supply
pressure
Steam
spring
for
3
to
30
psig
reduced
pressure,
for 15 psig
with 8 feet of tubing, temperature range of 120° to 180°F, 75 psig steam, for
process heating.
For
example:
Spirax
Sarco
1”
Cast Iron Pressure Regulator, Type 25P for
storage water heater.
150 psig inlet pressure, yellow spring for 3 to 30 psig reduced pressure, for
7
15 psig process heating.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice..
81
FANS / DAMPERS /
CURBS
SPIRAX SARCO MISCELLANEOUS EQUIPMENT
Type 13WS air eliminators are for water heating and cooling systems. The body is cast iron; the float mechanism, float,
valve and seat are stainless steel.
Price Each
3/4”
$242
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
Size
VARIABLE SPEED
DRIVES & STARTERS
TYPE 13WS AIR ELIMINATORS
TYPE IT PIPELINE STRAINERS
Price Each
Size
Price Each
3/8”
$50
1 1/4”
$68
1/2”
$42
1 1/2”
$80
3/4”
$44
2”
$126
1”
$52
Type T-202 has brass body and stainless steel internal parts.
Type VS-204 has cast iron body and stainless steel internal parts.
Size
Price Each
T-202
3/8”
$216
VS-204
1/2”
$329
The VB14 and VB21 are designed to admit air to condensing vapor (steam) or liquid systems where vacuum formation may
inhibit system drainage or operation.
Size
Price Each
VB14-Brass
1/2”
$185
VB21-Stainless
1/2”
$369
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
STEAM SPECIALTIES
Please call the Greensboro warehouse or your Hoffman & Hoffman salesman for information on any non-stocked sizes or other Sarco products.
Factory shipments for most items is less than two weeks.
VIBRATION ISOLATION
Type
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
TYPE VB14 and VB21 VACUUM BREAKER
SPIRAL PIPE
& ACCESSORIES
Type
FLEXIBLE DUCT /
SNAPLOCK & ACC.
TYPE T-202 and TYPE VS-204 THERMOSTATIC AIR VENTS
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
Size
VAV TERMINALS /
HOT WATER COILS
Type IT cast iron screwed strainers are for steam, gasses or liquids. Heavy-duty body is cast-iron reinforced with external
rib for maximum strength. Standard screen is 20 mesh type 304 stainless steel
SPIRAX SARCO STEAM TRAPS
TYPE TD-52 THERMO-DYNAMIC STEAM TRAPS
Type TD-52 steam traps are all stainless steel and having only one moving part and are designed with a rugged simplicity
providing efficiency and reliability unsurpassed in any steam trap of its type.
FLEXIBLE DUCT /
SNAPLOCK & ACC.
DAMPERS / LOUVERS /
ACCESS DOORS / ACTUATORS
VAV TERMINALS /
HOT WATER COILS
REGISTERS / GRILLES /
DIFFUSERS / TRANSITIONS
VARIABLE SPEED
DRIVES & STARTERS
FANS / DAMPERS /
CURBS
82
Size
Price Each
3/8”
$269
1/2”
$398
3/4”
$509
1”
$687
TYPE F & T FLOAT AND THERMOSTATIC STEAM TRAPS
Type F & T traps provide immediate and continuous discharge of condensate, air and non-condensables from a steam
system as soon as they reach the trap.
Type
Size
Price Each
Type
Size
Price Each
Type
Size
Price Each
FT-15
3/4”
$273
FT-30
3/4”
$340
FT-75
1”
$522
FT-15
1”
$338
FT-30
1”
$370
FT-75
1 1/4”
$799
FT-15
1 1/4”
$411
FT-30
1 1/2”
$705
FT-75
1 1/2”
$808
FT-15
1 1/2”
$581
FT-30
2”
$1227
FT-125
3/4”
$467
FT-15
2”
$1098
FT-75
3/4”
$463
FT-125
1”
$522
ELECTRIC HEATERS /
FILTERS & ACCESSORIES
SPIRAL PIPE
& ACCESSORIES
TYPE B INVERTED BUCKET STEAM TRAPS
Type B traps provide high discharge capacities and quick action, made possible by the use of large valves and the Sarco
Camlift mechanism.
Type
Size
Price Each
B1-H-125
3/4”
$190
B2-125
3/4”
$399
TYPE FA FLOAT OPERATED DRAIN TRAPS
STEAM SPECIALTIES
VIBRATION ISOLATION
Type FA traps provide an automatic and continuous discharge which modulates with the liquid flow to efficiently remove
condensate, or any unwanted liquid, from a compressed air or other pressurized gas system.
Type
Size
Price Each
FA-150
3/4”
$399
Please call the Greensboro warehouse or your Hoffman & Hoffman salesman for information on any non-stocked sizes or other Sarco products.
Factory shipments for most items is less than two weeks.
Prices subject to change without notice. All shipments are FOB Hoffman Warehouse, freight prepaid and added to invoice.
83
TERMS AND CONDITIONS
8/20
“H&H” shall mean Hoffman & Hoffman, Inc., and its officers, employees, and agents. “Buyer” shall mean the person or entity entering into this Agreement with H&H to purchase goods and/or
services.
1. Controlling Terms & Conditions: This Agreement, upon Buyer’s acceptance, is limited to the terms and conditions stated herein, despite any additional or conflicting terms and conditions contained in
any purchase order, any other document presented by Buyer, or any contract document between Buyer and any third-party (i.e. an owner, other contractor, etc.), all of which additional or conflicting terms
are hereby rejected by H&H. No waiver of, or modification to, these Terms and Conditions shall be valid unless made in writing and signed by an authorized representative of H&H. H&H salespeople are
not authorized to waive or modify any Terms and Conditions. The terms of any written proposal / quote made by H&H (“proposal”) and these Terms and Conditions shall constitute the entire agreement of
the parties. H&H rejects any revision of, addition to, or deletion of any term in this Agreement not specifically accepted by an authorized representative of H&H in writing.
2. Acceptance: Any H&H proposal expires if not accepted by Buyer within thirty (30) days from the date of the proposal. Prices are firm after acceptance provided the Buyer releases the order for
production by written notice to H&H within sixty (60) days of placing the order. Otherwise, prices are subject to escalation. Typographical and clerical errors in quotations, orders and acknowledgments
are subject to correction. Buyer is deemed to have accepted any H&H proposal to purchase goods or services, including these Terms and Conditions, when Buyer either (a) receives and retains an
acknowledgement from H&H without written objection within ten (10) days, (b) accepts delivery of all or any part of the goods ordered, (c) provides to H&H delivery dates, shipping instructions, or other
instructions evidencing acceptance, or (d) otherwise executes or assents to any proposal or these Terms and Conditions. If Buyer accepts any proposal, without the addition of any other terms and
conditions or any other Buyer modification, Buyer’s order shall be deemed acceptance of the proposal subject solely to H&H’s terms and conditions. If Buyer’s order is expressly conditioned upon H&H’s
acceptance or assent to terms and/or conditions other than those stated herein, return or acknowledgment of such order by H&H with H&H’s Terms and Conditions attached or referenced serves as H&H’s
notice of objection to, and rejection of, Buyer’s terms and as H&H’s counter-offer to provide goods or services in accordance with the H&H proposal and H&H’s Terms and Conditions. If thereafter Buyer
does not reject or object in writing to H&H within ten (10) days by written notice to Legal@hoffman-hoffman.com, H&H’s counter-offer will be deemed accepted by Buyer. In any event, Buyer’s acceptance
of all or any part of any goods ordered will constitute Buyer’s acceptance of H&H’s proposal subject to H&H’s Terms and Conditions.
3. Terms of Payment / Taxes: Payment is due net thirty (30) days from the date of each H&H invoice to Buyer. Interest at the rate of 1 1/2% per month (or the highest interest rate allowed by applicable
law, if lower) may be charged after the 30-day period until payment is received. H&H accepts credit card payments. If Buyer chooses to pay by credit card, Buyer is subject to an additional convenience
fee of 3.0% of the total amount paid by credit card. Buyer shall pay all costs of collection incurred by H&H including, but not limited to, reasonable attorneys’ fees, collection fees, and court costs. H&H
may suspend all further services and transactions (regardless of their status) without liability if Buyer’s account is more than thirty (30) days past due or if Buyer’s credit, in the sole judgment of H&H, is
impaired at any time. Partial invoices may be submitted for any portion of completed work and/or delivered materials. While risk of loss passes to Buyer, Seller will have a purchase-money security interest
in all goods (including any accessories and substitutions) purchased under this Agreement to secure payment in full of all amounts due H&H, and the underlying proposal, together with these Terms and
Conditions, form a security agreement (as defined by the UCC.) Buyer shall keep all goods purchased under this Agreement free of all taxes and encumbrances, shall not remove said goods from their
original installation point and shall not assign or transfer any interest in said goods until all payments due H&H have been made. The purchase-money security interest granted herein attaches upon H&H’s
acceptance or acknowledgment of this Agreement and Buyer’s receipt of said goods, but prior to installation. Buyer will have no rights to set off against any amounts which become payable to H&H under
this Agreement or otherwise. Notwithstanding any Buyer form or document to the contrary, H&H shall not release any rights to make a lien and/or bond claim, or other claim for damages, in connection
with goods purchased or services provided until H&H has obtained payment in full for such goods or services and any damages. Furthermore, Buyer is responsible to pay in full for the goods or services
provided by H&H regardless of whether such goods or services are funded for Buyer pursuant to any extraneous contract and/or by an applicable project owner or contractor. Unless otherwise agreed by
H&H in writing, Buyer shall pay to H&H, in addition to the contract price, all sales, use, excise, privilege or other taxes imposed by any local, state or federal taxing authority payable in connection with the
goods or services furnished.
4. Shipments / Claims: All shipments of goods are at Buyer’s risk, f.o.b. factory, or if shipped from another location, f.o.b. point of shipment, with charges either allowed, added to invoice, or collected as
noted. Any claims for damage or shortage or loss in transit must be filed by Buyer against the applicable carrier. If requested, H&H will reasonably assist the Buyer when making its claim for damages
and/or losses while in transit. Claims against factory shortages will not be considered unless made within sixty (60) days after Buyer’s receipt of the goods.
5. Approval: H&H shall not be liable in any way should any third party (such as a project architect, engineer, owner, etc.) fail to accept or approve equipment ordered by Buyer. H&H cannot guarantee to
meet or equal specifications written around another make of equipment different than that purchased by Buyer.
6. Warranties and Liability: Upon condition that H&H receives payment in full for all amounts owed, H&H extends to Buyer the manufacturer’s warranty (a copy of which is available upon request), and
manufacturer’s warranty is in lieu of any warranties contained in any applicable project contract, conditions, plans, or specifications. H&H ITSELF MAKES NO OTHER WARRANTIES, EXPRESS OR
IMPLIED, AS TO ANY MATTER WHATSOEVER, INCLUDING, WITHOUT LIMITATION, THE CONDITION OF THE EQUIPMENT, ITS MERCHANTABILITY, IMPLIED WARRANTIES OF DESIGN OR
FITNESS FOR A PARTICULAR PURPOSE. H&H SHALL HAVE NO LIABILITY FOR ANY DIRECT DAMAGES BY REASON OF FAILURE OF THE EQUIPMENT TO OPERATE OR FAULTY OPERATION
OR MISUSE OF THE EQUIPMENT, AND UNDER NO CIRCUMSTANCES SHALL H&H BE LIABLE TO BUYER OR TO ANY THIRD PARTY FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL,
SPECIAL, PUNITIVE, EXEMPLARY OR LIQUIDATED DAMAGES OR LOSSES, INCLUDING BUT NOT LIMITED TO, LOSS OF USE, INCOME, PROFIT OR PRODUCTION, LOST DATA, SPOILAGE,
DELAY, OR INCREASED COST OF OPERATION. SAID EXCLUSIONS APPLY EVEN IF H&H HAS BEEN ADVISED OF SUCH POSSIBLE DAMAGES OR IF SUCH POSSIBLE DAMAGES WERE
REASONABLY FORESEEABLE. Buyer acknowledges that H&H is not responsible for the design of goods or services purchased and did not participate in any project design in connection with such goods
or services.
7. Limitation of Remedy: H&H shall have no liability for any damage caused by negligence, accident, misuse, improper storage, improper installation, improper service, maintenance or operation of
equipment by Buyer or any third party. To the extent H&H is liable to Buyer under any legal theory (whether under warranty, negligence, strict liability or contract), Buyer’s sole and exclusive remedy is
limited to one of the following, which H&H shall elect in its sole and absolute discretion: (a) repair or replacement of purchased equipment or its parts by H&H or its duly authorized representative or (b)
refund of the purchase price. In no event shall H&H’s liability exceed the purchase price paid by Buyer under this Agreement, and Buyer waives all other remedies at law or in equity. Furthermore, Buyer
waives any claim with respect to quantity or quality of goods or services purchased, unless Buyer notifies H&H in writing within ten (10) days of the date Buyer discovered, or by reasonable inspection
should have discovered, the basis for such claim. Under no event shall H&H owe any duty or have any obligation whatsoever to any customer or client of Buyer or to any other third party.
8. Hazards: H&H is not responsible for the identification, detection, abatement, encapsulation or removal of hazardous substances, such as (without limitation) asbestos, products or materials containing
asbestos, mold, fungi, mildew, or bacteria. At all times now and in the future, H&H takes no responsibility for and makes no representations or warranties concerning any existing or future hazardous
substance or condition (i.e. mold) or the remedy or prevention thereof. Furthermore, Buyer has a duty to alert H&H of any known or likely potential hazards at any project site where H&H’s representatives
and affiliates may be present in connection with this Agreement.
9. Indemnification / Insurance: To the fullest extent permitted by law, Buyer shall indemnify, hold harmless and defend H&H and its officers, employees and agents from and against all claims, demands,
liabilities, suits, judgments, awards, or expenses of any kind (including reasonable attorneys’ fees and costs incurred defending such claims or demands, regardless of whether they result in legal action or
are prosecuted to final judgment or award), which result or arise from Buyer’s purchase, installation, or use of goods or services provided by H&H. Buyer shall indemnify H&H against, without limitation,
liability arising from any acts or omissions whether deemed negligent, accidental or intentional, which is caused, in part, by the active or passive negligence or other fault of H&H. To the fullest extent
permitted by law, the obligations of defense and indemnification set forth herein shall be binding upon Buyer no matter what the nature of the claim asserted may be (whether it be for negligence, warranty,
strict liability, or otherwise) and shall be binding even if H&H is alleged or proven to have acted negligently; provided, however, that Buyer shall have no obligation to provide indemnification to H&H if the
claim asserted arises in negligence and is finally adjudicated to have arisen solely from the negligence of H&H. Buyer shall also indemnify and hold harmless H&H from all liability for taxes owing in
connection with Buyer’s purchase of goods or services. The obligations and rights to indemnity herein shall not negate, abridge or reduce other such rights or obligations under law. This Agreement does
not require Buyer to indemnify H&H for H&H’s own negligent or intentional acts or omissions to the extent that doing so would violate applicable law. Buyer and H&H jointly authorize and request any court
or arbitrator considering the enforceability of this paragraph to re-write this paragraph so that it requires Buyer to defend, indemnify, and hold H&H harmless to the fullest extent permitted by applicable law.
Upon written request of Buyer, H&H shall only be required to name Buyer as an additional insured to the coverage types listed on H&H’s standard Certificate of Insurance (available upon request). In no
event does H&H waive any rights of subrogation.
10. Claims Resolution / Governing Law: Unless H&H elects otherwise, all claims and disputes between Buyer and H&H arising out of or relating to performance of any agreement or breach thereof must
be decided by binding arbitration in accordance with the Construction Industry Arbitration rules of the American Arbitration Association (AAA). Demand for Arbitration must be filed in the regional office of
the AAA closest to Greensboro, North Carolina, and the filing party must serve such Notice upon the other party in accordance with AAA rules. The procedural and substantive law of the State of North
Carolina must apply in and to all arbitration proceedings, and Greensboro, North Carolina, is designated as the sole and exclusive venue for such proceedings. Any award arising from such proceedings
shall be final and binding upon the parties and enforceable in accordance with the Federal Arbitration Act. H&H and Buyer agree that their transactions involve interstate commerce. This Agreement shall
be governed by and construed solely in accordance with the laws of the State of North Carolina, without regard to principles of conflicts of laws. H&H shall have the sole and exclusive right, at H&H’s sole
and absolute discretion, to waive the arbitration provision and to elect to litigate any claim or dispute in a court of appropriate jurisdiction. Unless H&H elects another court of appropriate jurisdiction in H&H’s
sole and absolute discretion, the state courts located in Greensboro, Guilford County, North Carolina, shall be the sole and exclusive forum for any litigation between H&H and Buyer. Buyer consents to the
jurisdiction of the state and federal courts located in Greensboro, Guilford County, North Carolina.
11. Delays / Penalties / Force Majeure: Delivery dates are approximate and not guaranteed. In no event and under no circumstances whatsoever will H&H be liable for any damages or expenses caused
by any failure or delay in making delivery of goods or in performing services hereunder. No penalty clause or liquidated damages of any kind (for delays or otherwise) apply to H&H unless pre-approved in
writing by an H&H officer. Furthermore, in no event and under no circumstances whatsoever will H&H be liable under this Agreement for any event of force majeure, or an event or cause beyond H&H’s
reasonable control.
12. Cancellations / Returns: If an order is canceled through no fault of H&H, the Buyer shall reimburse H&H for all expenses, costs, damages and losses (including lost profits) incurred by H&H in
connection with the order and its cancellation. Goods may not be returned except by written permission of a representative of H&H, and when so returned, shall be subject to handling and transportation
charges. No warehouse goods returned after 90 days.
13. Equal Employment Opportunity / Affirmative Action Clause: H&H and Buyer shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit
discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion,
sex, sexual orientation, gender identity or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment
individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
14. Government Contracts / Disadvantaged Business Entities: If Buyer’s purchase of goods or services is in any way connected to any federal, state, or local government project, which implicates
or utilizes any Small, Minority or Disadvantaged Business incentives or qualifications (or other similar laws or regulations), Buyer represents and certifies to H&H that Buyer is performing a commercially
useful function on such project.
15. Trust Funds: Buyer agrees that all funds Buyer receives that result from the labor, materials, and/or equipment furnished by H&H will be considered “Trust Funds.” Buyer will hold all Trust Funds in
trust for the sole and exclusive benefit of H&H. Buyer will segregate Trust Funds from other funds. Buyer will account for all Trust Funds and deliver all Trust Funds to H&H. Buyer will not use Trust Funds
for any purpose other than paying H&H.
84
Catalog Index
A
G
Access Doors
54
Gravity Ventilators
Access Panels
55
H
Actuators
44
Hanging Systems
ASHRAE Ventilation Design
18
Hot Water Coils
18
71-72
41
I
B
19-21
Spiral Grilles
38
Spiral Pipe
64
Spring Vibration Mountings
77
Spring Vibration Hangers
78
Square to Round Transitions
39
Starters
25
Backdraft Dampers
22-23
In-Line Fans
Balancing Dampers
42, 67
L
Steam Regulators
80
Stationary Louvers
51-53
Blast Gates
72
Louvered Ceiling Diffusers 32-33
Steam Strainers
81
Brick Vents
50
M
Steam Traps
82
Stick-On Fittings
58
Manometers
C
Cartridge Filters
74
Ceiling & Cabinet Fans
12-17
Ceiling Radiation Dampers 15, 45
Centrifugal Roof Exhausters
2-9
Clamps
61
Concentric Reducers
39
Control Dampers
43
Cube Core Grilles
34-35, 37
D
Door Grilles
Drives
Duct Sealant
34
26-27
60
E
75
P
T
Perforated Diffusers
31, 36
1
Pipe Portals Systems
63
Tape
62
Plaster Frames
34
Terms and Conditions
83
Pleated Prefilters
74
Tools
61
Pressure Gauges
75
U
R
Unit Heaters
Rectangular Fire Dampers 47-49
V
Registers
28-29, 34-35
VAV Diffusers
38
29, 36
VAV Terminals
40
Volume Control Dampers
30
Return Grilles
Roof Curbs
10
Round Ceiling Diffusers
30
Round Fire Dampers
46
S
Elastomeric Pads
79
Sheet Metal Screws
60
Electrical Accessories
24
Side Access Filter Housings
76
Equipment Rails
10
Sidewall Exhausters
F
Table of Contents
8-9
Sidewall Propeller Fans
11
Filter Accessories
75
Slot Diffusers
38
Filter Grilles
37
Smoke Detectors
44
Filter Media
74
Snaplock Pipe
Fire Dampers
46-49
Spiral Access Doors
Flexible Duct
56-57
Spiral Fittings
59-60
54
64-70
73