Bangalore university Department of Electrical Engineering University Visvesvaraya College of Engineering. Power System Dynamics Seminar Topic: POWER SYSTEM STABILIZER Submitted By, SINDHU V II SEM MTech (POWER & ENERGY SYSTEM) 1 INTRODUCTION Power system stability Classification of Power system stability 2 BACKGROUND Types of oscillations 1. Intra plant mode oscillations 2. Local plant mode oscillations 3. Inter area mode oscillations 4. Control mode oscillations 5. Torsional mode between rotating plant 3 POWER SYSTEM STABILIZER(PSS) INTRODUCTION TO PSS Needs for PSS To extend the angular stability A cost efficient and satisfied to solution to the problem of oscillations conveniently done by PSS It provides additional damping to the system It provides the performance of excitation system 4 Block diagram representation of power system with stabilizer 5 Block diagram representation of a Power System Stabilizer 6 VOLTAGE GRAPH 7 ADVANTAGES AND DISADVANTAGES Improved damping of the system The dynamic stability of a system is improved Reduced power losses Time consuming tuning of PSS Non-optimal damping in the entire operating range. 8 REFERENCES Kunder.p.(1994) Power System Stability and Control, McGraw-Hill Anderson,P.M.;&Fouad, A.A. (2003). Power System Control and Stability(2nd edition),John Wiley&sons. Zhang,X.P.; Rehtanz,C.;& Pal, B.(2006). Flexible AC Transmission System: Modeling and Control. www.wikipaedia.com 9 THANK YOU 10