Curriculum Vitae
Yung-How Wu is a Senior Researcher of Materials Research Laboratories/ITRI that
he joined in 1982. He majored in Mechanical/Metallurgical Engineering and received
his Ph.D. degree in Mechanical Engineering from the National Chiao Tung University,
Taiwan in 1998 and has been involved in the field of NDT(AET, UT, ET, RT, MT, IRT)
for over 30 years. During these times, he passed ASNT Level III of UT, ET, RT, MT,
EPRI Level II of IGSCC detection and sizing in EPRI and advanced TOFD training in
AEAT. Mr. Wu has been leading R&D of various NDT techniques for both
governmental and commercial applications in utilities, refineries, transportation, steel
and electronic industries. Mr. Wu will continue to further NDT automation mainly
with TOFD, ACFM and Phase Array techniques and offer various NDE services for
industries. Lately, Mr. Wu has also involved in the development of energy saving
techniques and materials for buildings and as well NDE techniques for fuel cell, wind
turbine, rail and tyre.
Personal Data
Yung-How Wu, Ph.D.
6F, Lane 92, Pei-Da Rd., Hsinchu, 300 Taiwan
Tel: 886 (0)3 5420285(H), (0)3 5916831(O)
Mobile: 886 (0)933792939
Email: yhwu01@itri.org.tw, yhwu01@hotmail.com
Date of Birth: 1956.06.07
Nationality: Republic of China
Education
1979
Bachelor of Mechanical Engineering at the National Cheng-Kong
University
1981
Graduated Master of Mechanical Engineering at the National
Cheng-Kong University
1999
Graduated Doctor of Mechanical Engineering at the National
Chiao-Tung University
Certificates
1. ASNT
2. EPRI
3. SNTCT
UT/ET/RT/MT Level III
IGSCC UT Detection & Sizing Level II
UT/ET/RT/MT Level III
Experiences
1981-present Joined as an Researcher at MRL/ITRI and to establish Fracture
Mechanical Testing Facilities and NDE Technologies. Being involved
in Failure Analysis, Fracture Mechanic Testing, Acoustic Emission
Techniques for Pressure Vessels and Composite Materials, Automation
of Ultrasonic and Eddy Current Techniques in Refineries, Utilities and
Steel Industries.
1980-1982
Part-time Teacher of Mechanical Design and Materials Science at
Nan-Tai Technical school, Tainan
1983-1985
Part-time Teacher of Mechanical Design and Materials Science at
Ya-Tong Technical School, ChungLi
1990-1991
Visiting Researcher of NDE Center of EPRI, Charlotte. Being Involved
in TOFD technique for Reactor Pressure Vessels
1991-1995
Training Instructor and Committee Member of Technical Section of
The Republic of China’s Society of Nondestructive Testing(ROCSNT)
2004-present Committee Member of Technical Section of Council of Labor Affairs,
Executive Yuan Taiwan. Being involved in review of the Extension of
ISI of Pressure Vessels.
2005-present Committee Member of China Petroleum Corporation Taiwan. Being
involved in review of NDE of subsea pipelines.
2007-present Reviewer of NDT & E international. Being involved in review of the
study of ECT and Probability Of Detection.
2012-present Third-party Reviewer of NDE procedure and inspection for RPV
anchor bolt of Taipower Company.
2012-present Assessor of NDT sector, Department of Laboratory Accreditation of
TAF, Taiwan
2013-present Instructor of Regular Ultrasonic Inspection Training of Taipower
Company.
2013-present Member of Technical Committee of TAF, Taiwan
2013-present
Training Instructor of the Society of Nondestructive Testing and
Certification of Taiwan (SNTCT)
2015-2015
Reviewer of CSME conference
2015- present
Chief of building wall safety committee and supervisor of Taiwan
Sustainable Green Construction Union
2017-present
Director of Safety and Inspection Association, Taiwan
2017-present
Expert of Factory Inspection Committee of Industrial Bureau of
Ministry of Economic Affairs, Taiwan
Publications
1.
2.
3.
4.
5.
6.
7.
8.
9.
Y.H. Wu, et al., “Acoustic Emission Analysis of Composite Failure Mechanisms
with Special Reference to the Modelling of Amplitude Distributions”, Second
International Symposium on Acoustic Emission From Reinforced Composites,
Montreal, Canada, Jul.21-25, 1986, pp. 37~39.
Y.H. Wu, et al., “Quantitative Ultrasonic Techniques for HIC Detection in LPG
Tank”, Proceedings of the 6th Pan Asia NDT Conference, New Zealand, Mar.
1990.
Y.H. Wu, et al., “Development of a PC-based Signal Processing Unit for
Nondestructive Testing: The ALC and Small Angle B-scan Technique”, Review
of Progress in Quantitative Nondestructive Evaluation, Vol. 9, pp. 1047-1054,
1990.
Y.H. Wu, “A Structural Reliability-Based Non-destructive Inspection Guideline”,
12th SmiRT, Teipei, Aug. 1993.
Y.H. Wu, “Study of the nondestructive inspection frequency based on structural
reliability considerations”, NDT&E International, Taipei, Sep. 1993.
Y.H. Wu, et al., “Development of Automatic EC Inspection Technique for Blade
Root Cracking”, EPRI Topical Workshop, Charlotte, NC, Aug. 1995.
Y.H. Wu, et al., “Development of NDE Techniques for Turbine Blade Root
Cracking”, Proceedings of the 8th Asia-Pacific Conference on Nondestructive
Testing, Dec. 1995, Taipei, pp. 117~125.
Y.H. Wu, et al., “Ultrasonic Assessment of Under-pad SCC around Nozzle of a
Condenser Drum”, 9th Asia-Pacific Conference on NDT, Mar. 1998.
Y.H. Wu, et al., “Recent Advancement of ISI for Attachment Area on Steam
Turbines in Taiwan”, 4th International Conference on Engineering Structural
Integrity Assessment, Sep. 1998.
10. Y.H. Wu, et al., “Ultrasonic Assessment of Under-pad SCC around Nozzle of a
Condenser Drum”, 9th Asia-Pacific Conference on NDT & 1998 ASNT Spring
Conference/7th Annual Research Symposium, Mar. 23-27, 1998, Anaheim, CA,
USA, pp. 129-133.
11. Y.H. Wu, et al., “Recent Advancement of ISI for Attachment Area on Steam
Turbines in Taiwan”, 4th International Conference on Engineering Structural
Integrity Assessment, Sep. 22-24, 1998, Cambridge, UK.
12. Y.H. Wu, et al., “Acousto-ultrasonic Study of Adhesive Bond Quality at
Interfaces of Rubber-metal Plates”, 9th Asia-Pacific Conference on NDT & 1998
ASNT Spring Conference/7th Annual Research Symposium, Anaheim, CA, USA
Mar. 23-27, 1998.
13. Y.H. Wu, et al., “Feasibility Study of Electro-magnetic Techniques for On-line
Monitoring of Surface Defects on Rolls”, 9th Asia-Pacific Conference on NDT &
1998 ASNT Spring Conference/7th Annual Research Symposium, Anaheim, CA,
USA, pp. 63-66, March 23-27, 1998.
14. Y.H. Wu, et al., “Applications of Digital Ultrasonic Technique and Modeling
Software on Inspecting Petrochemical Reactors”, Proceedings of the 17th Annual
Conference of the Asia-Pacific Occupational Safety and Health Organization, Sep.
24-29, 2001, Taipei, pp. 390-403.
15. Y.H. Wu, et al., “Reliability Assessment of Automated Eddy Current System for
Turbine Blades”, The Journal of The British Institute of Non-Destructive Testing,
UK, May 2003, pp. 332-336.
16. Y.H. Wu, “Ultrasonic Methods for Inspecting Inter-granular Stress Corrosion
Cracks.”, Chinese Journal of Inspection , Volume 9 No. 3, pp 23~35, May. 1991.
17. Y.H. Wu, “Certification of Manual ultrasonic Inspection Techniques for IGSCC”,
Chinese Journal of Inspection , Volume 9 No. 4, pp 45~50, Jul. 1991.
18. Y.H. Wu, “Performance Demonstration of Ultrasonic and Advanced NDE
Techniques Used in Nuclear Plants”, 81’st Fiscal Conference of Chinese NRC,
Nov. 1992.
19. Y.H. Wu, et al, “Automated Ultrasonic Inspection of Internal Defects of
Hydrogen Storage Tanks”, Chinese Journal of Inspection , Volume 10 No. 1, pp
16~24, Jan. 1992.
20. Y.H. Wu, et al, “Review of JIS G0801 Japanese Standard of Ultrasonic
Inspecting of Pressure Vessel Plates”, Chinese Journal of Inspection , Volume 10
No. 1, pp 57~62, Jan. 1992.
21. Y.H. Wu, “Ultrasonic Methods for Weld overlay on RPV”, CPC News and
Report, Apr. 1993.
22. Y.H. Wu, “Review of Ultrasonic Methods for Detecting IGSCC on Piping”, TPC
Electricity and Material News and Report, Jan. 1993.
23. Y.H. Wu, et al., “Review of Current Certification of IGSCC detection and Sizing
in USA”, 82’nd Fiscal Conference of National Laboratory Accreditation System,
Taipei, pp B-058 ~ B-067, Jun. 1993.
24. Y.H. Wu, et al., “Ultrasonic Methods for In-service Inspection of Weld-overlay
and Weldment of RPV”, Chinese Journal of Inspection , Volume 11 No. 5, pp
20~28, Sep. 1993.
25. Y.H. Wu, et al., “Study of Ultrasonic Signal Patterns of weldment of SS304
Pipelines”, Chinese Journal of Inspection , Volume 11 No. 6, pp 11~20, Nov.
1993.
26. Y.H. Wu, et al., “Comparison of Various Ultrasonic Testing Standards for
27.
28.
29.
30.
Weldments”, Industrial Materials, Apr. 1994.
Y.H. Wu, “Ultrasonic Thickness Measurement using Dual-element Transducers An Interesting Problem and Analyzing Method”, Chinese Journal of Inspection ,
Volume 12 No. 1, pp 35~39, Jun. 1994.
Y.H. Wu, et al., “Digital Signal Processing of TOFD and Relevant Techniques”,
Chinese Journal of Inspection , Volume 12 No. 5, pp 14~25, Sep. 1994.
Y.H. Wu, et al., “TOFD Techniques for Inspecting Weld Defects”, Chinese
Journal of Inspection , Volume 12 No. 6, pp 5~20, Nov. 1994.
Y.H. Wu, et al., “Eddy Current Technique for Inspecting Steeple Cracks on Steam
Turbines”, Chinese Journal of Inspection , Volume 13 No. 1, pp 5~12, Jan. 1995.
31. Y.H. Wu, “Development of Automated Inspection Method for Root cracks on
Steam Turbines-A Practical Application with crucial safety Impact”, Industrial
Materials, Aug. 1995.
32. Y.H. Wu, et al., “Evaluation of Ultrasonic Inspection Techniques for Root cracks
on Steam Turbines”, Chinese Journal of Inspection, Volume 13 No. 5, pp
275~288, Sep. 1995.
33. Y.H. Wu, “Influences of NDE reliability on Structural Safety”, Chinese Journal
of Inspection , Jun. 1996.
34. Y.H. Wu, et al., “Development of NDE Methods for Root cracks on Steam
Turbines”, TPC Monthly Report, Volume 580, pp 87~105, Dec. 1996.
35. Y.H. Wu, et al., “NDE for Inspecting Weldments of Pressure Vessels”, Metal
Industries, Jan. 1997.
36. Y.H. Wu, et al., “Measuring Errors of TOFD Technique”, Chinese Journal of
Inspection , Jun. 1997.
37. Y.H. Wu, et al., “Development of Crack Inspection Method for Disk Rim cracks
on Low Pressure Steam Turbines”, TPC Monthly Report, Volume 591, pp 33~44,
Nov. 1997.
38. Y.H. Wu, et al., “Feasibility Study of Electromagnetic Array Technique for In-situ
Inspection of Surface Cracks on Rolls”, 10’th Chinese NDT Conference,
Kaohsiung, Dec. 1997.
39. Y.H. Wu, et al., “Ultrasonic Inspection of Under-pad Corrosion of Drum”, 10’th
Chinese NDT Conference, Kaohsiung, pp 2-55~2-61, Dec. 1997.
40. Y.H. Wu, et al., “ISI for Disk Rim and Blade Steeples”, 10’th Chinese NDT
Conference, Kaohsiung, pp 3-21~3-30, Dec. 1997.
41. ”Failure Prevention and Maintenance of Piping and Equipments in Refineries”,
Y.H. Wu, et al., Kaohsiung Chamber of Industry, Feb. 1998.
42. Y.H. Wu, et al., “Applications of Computerized Ultrasonic Techniques”,
Industrial Materials, Volume 135, pp 79~86, Mar. 1998.
43. Y.H. Wu, et al., “NDE for Steel Infrastructures”, Chinese Society of Civil and
water conservancy, pp 277~299, Mar. 1999.
44. Y.H. Wu, et al., “Manual Ultrasonic Methods for Corrosion Defects”, 88’th Fiscal
Conference of Chinese Council of Labor Affairs, Mar. 1999.
45. Y.H. Wu, et al., “Automated Ultrasonic Methods for Steel Rolls, Taiwan”,
Quarterly Report of Castings, Volume 12, pp 15~23, Mar. 2002.
46. Y.H. Wu, et al., “Automated Ultrasonic Methods for Steel Rolls”, Series Book of
Chinese Technology Development, China Association of Science and Technology,
China, Feb. 2003
47. Y.H. Wu, “Smart Windows and Glass Coatings” Industrial Materials, pp 136~149,
2003.
48. Y.H. Wu, “Crack Inspection Techniques for Steel Bridges and Weldment”, NDT
and Inspection Conference of Bridges”, National Science Council, Taipei, Oct.
2005
49. Y.H. Wu, “The Categories and Selection of Windows Films”, Coating
Technologies, Coating Technology Association, Volume 3, pp 45~58, 2007.
50. Y.H. Wu et al., “Development of Automated Electromagnetic Techniques for
Inspecting Inner Cracks of LPG Tanks”, 17WCNDT, Shanghai, Oct. 2008.
51. C.C. Hsiao, Y.H. Wu et al., “Study of Ultrasonic Techniques on the inspection of
NPP components”, 17WCNDT, Shanghai, Oct. 2008.
52. Y.H. Wu, “Defect detection of steel structures”，Applications and Inspection
Methods for Bridges, edited by The Chinese Institute of Civil and Hydraulic
Engineering and published by Scientific & Technical Publishing Co., Ltd.,
2010.05.05.
53. Y.H. Wu et al., “Development of Remote Operation Inspection Technique for
ABWR RIP Weld”, 2011 GCFNDT, Xiamen and Kinmen, Nov., 2011.
54. Y.H. Wu et al., “NDT of Crucial Structures Experienced in Taiwanese Refineries”,
2011 GCFNDT, Xiamen and Kinmen, Nov., 2011.
55. Y.H. Wu, “Development of automated NDE techniques for the inspection of
critical component in nuclear power plants”, China-Japan New UT technology
Forum, Shanghai / Beijing / Xiang, May. 08-15, 2012.
56. Y.H. Wu, “Development and Application of Arrayed Ultrasound and Eddy
Current Techniques”, New NDE Methods for Quality Control and Structural
Safety Forum, Hsinchu / Kaoshiung Taiwan, Sep. 25-27, 2012.
57. Y.H. Wu, “Building Material Standard, Testing and Performance Evaluation for
Energy Saving”, Building Material Development for Energy Saving Forum,
Taipei, Oct. 22, 2012.
58. Y.H. Wu, “NDE Automation and Applications”, Invited talk in National United
59.
60.
61.
62.
University, MioLi Taiwan, Oct. 31, 2012.
Y.H. Wu et al., “Development of Real-time Water Monitoring Technique for Fuel
Cell Cathode”, 2012 MRS-T Annual Meeting, Huwei Taiwan, Nov. 23-24, 2012.
Y.H. Wu, “Ultrasonic inspection of RPV anchor bolts”, Invited talk in TPC
Forum, May. 08, 2013.
Y.H. Wu, “In service inspection and regulation of wind turbines”, 2013 Forum of
the reliability of wind turbine system, National Chiao-Tung University/National
Science Council, Jul. 18, 2013.
Y.H. Wu et al., “Development of Non-destructive Inspection Techniques for
Wind Turbine Components”, 2013 Taiwan Wind Energy Symposium, National
Taiwan Ocean University/Taiwan Wind Energy Association, Dec. 5, 2013.
63. Y.H. Wu, “Development and Applications of NDT in Utilities and Refineries”,
Invited talk in the Industrial Cooperation Meeting, Shanghai, May. 24, 2014.
64. Y.H. Wu et al., “PAUT based Techniques Developed for Power Industries and
Refinery in Taiwan”, The Fifth US Japan NDT Symposium, ASNT, pp 282 - 289,
Maui Hawaii, Jun. 16-20, 2014.
65. Y.H. Wu, “Evolution of Ultrasonic Inspection Techniques, applications and
Regulation”, 2014 annual training course of manual ultrasonic inspection, Linco
Training Center of Taipower, Aug. 25, 2014.
66. Y.H. Wu et al., “PAUT Techniques Developed for Enhancing the Safety of
Energy Sector”, The 17th Annual NDT Conference of the Society of
Non-destructive Testing & Certification of Taiwan, The Splendor Hotel Taichung,
Oct. 30-31, 2014.
67. Y.H. Wu et al., “Development of Remote Operated Inspection and Measurement
System for ABWR RIP Weld”, The 17th Annual NDT Conference of the Society
of Non-destructive Testing & Certification of Taiwan, The Splendor Hotel
Taichung, Oct. 30-31, 2014.
68. Y.H. Wu et al., “Inspection of Crack and FFS Assessment of Isomeric RPV”, The
17th Annual NDT Conference of the Society of Non-destructive Testing &
Certification of Taiwan, The Splendor Hotel Taichung, Oct. 30-31, 2014.， Oct.
30-31, 2014.
69. Yung-How Wu, Chu-Chung Hsiao, Chih-Hao Chen, “Damage and Thermal
Stress Analysis of Waste Heat Boiler”, Material Annual Meeting 2014, China
Steel Corporation, Kaohsiung, November 20-21, 2015.
70. Yung-How Wu, Chu-Chung Hsiao, Chih-Hao Chen, “Thermal Stress and
Damage Analysis of a Waste Heat Boiler”, 2014 SNTCT NDT Forum and
Annual Meeting, The Splendor Hotel, Taichung, October 30-31, 2014.
71. Y.H. Wu et al., “Inspection of Building Exterior Wall”, ITRI/PIC/TSGCU,
August, 2015.
72. Yung-How Wu, “Latest Evolution of Ultrasonic Inspection Techniques and
Practical Applications in Taiwan”, The 11th International NDT Academic NDT
Conference”, National Taiwan University, Taipei, November 17th, 2015.
73. Yung-How Wu, “Development of NDT Methods for Wind Turbine Components”,
The 13th Fracture Mechanics Conference”, Fracture Mechanics Committee of
Material Association”, Kenting Howard Hotel, Pingtong, Taiwan, March 23-24,
2016.
74. Yung-How Wu, “Inspection of Building Materials”, Forum of the Application of
Infrared Thermography and Ultrasonic Inspection of Building Exterior Wall,
Taipei Tech/TSGCU/PIC, National Taipei University of Technology, May 27th,
2016.
75. Yung-How Wu, “Latest Evolution of Ultrasonic Inspection Techniques and
Practical Applications in Taiwan”, The NDT Forum and the New ISI Techniques”,
Suzou NDT Association, Suzou, China, September 9th, 2016.
76. Yung-How Wu, “NDT for High Pressure Vessels”, Occupational Safety Office,
Labor Affairs Bureau, Kaohsiung City Government, Kaohsiung, October 18th,
2016.
77. Yung-How Wu, “Fast Screening Method for Building Walls – Discussions on
Infrared Thermography”, Greater Taichung Architects Association, Taichung,
October 18th, 2016.
78. Yung-How Wu, “Fast Screening Method for Building Walls – Discussions on
Infrared Thermography”, Architectural Design Forum, Chinese Society of
Interior/Top Link International Exhibition Co./TSGCU，Taipei World Trade
Center, Taipei, April 13-16, 2017.
79. Yung-How Wu, Chu-Chung Hsiao, Chih-Hao Chen, “and Thermal Stress
Analysis of a Damaged Waste Heat Boiler”, MSAM 2018, Kitakyushu, Japan,
April 10-13, 2018.
80. Yung-How Wu, “ Failure Analysis of Drive Rod used on the Switching Machines
on Taoyuan Airport Metro”, Northern Region Engineering Office, Railway
Bureau, MOTC, New Taipei City, July 24., 2018
81. Yung-How Wu, “Failure Analysis and Inspection of a Cracked Turnout Crossing”,
2018 Su-Zou International NDT Forum, Su-Zou NDT Association, Su-Zou,
August 31, 2018.
82. Yung-How Wu, “Air Coupled Ultrasound used for In-Manufacture Inspection”，
2019 International NDT Forum，Zhejiang Huaxin Steel Structure Inspection
Research Institute / Hangzhou Huaxin Inspection Technology Co., Ltd.,
Hangzhou, May 21, 2019.
83. Yung-How Wu, Chin-Chuan Chuang, “Life Improvement of the Drive Rod of
Switching Machines of Taoyuan Airport Metro – Review of Drive Rod Failure
and Improvement Progress”, Northern Region Engineering Office, Railway
Bureau, MOTC, New Taipei City, July 11, 2019.
84. Yung-How Wu, “Process Safety Assessment and Risk Control of Petroleum Plant
Facilities”, 2019 Su-Zou International NDT Taihu Forum, Su-Zou NDT
Association, Su-Zou, July 19, 2019.
Report
1. “Advanced NDE Techniques for Nuclear Plants”, Y.H. Wu, et al., contract
research, Atomic Energy Council/ITRI, Jun. 1992.
2. “Study of Maintenance Techniques for RPV”, Y.H. Wu, et al., contract research,
CPC/ITRI, Jun. 1993.
3. “Ultrasonic Methods for Weldments of Pressure Vessels”, Y.H. Wu, et al., contract
research, China Petroleum Corporation/ITRI, Jun. 1994.
4. “NDE Methods for Steam Turbine Cracks”, Y.H. Wu, et al., contract research,
Taiwan Power Company/ITRI, Jun. 1994.
5. “NDE Techniques for Quality Control of Steel Products”, Y.H. Wu, et al., contract
research, Tang Eng Stainless Steel Plant/ITRI, Jul. 1996.
6. “Study of Inspection Techniques for Disk Rim Cracks on Low Pressure Turbines”,
Y.H. Wu, et al., contract research, Taiwan Power Company/ITRI, Jun. 1997.
7. “Inspection and Validation of Corrosion on Rail Fasteners of Taipei Rapid
Transportation Systems”, Y.H. Wu, et al., contract research, Department of Rapid
Transit Systems, Taipei City Government/ITRI, Dec. 1997.
8. “Development of Eddy Current Method for Inspecting Surface Defects on Rolls”,
Y.H. Wu, et al., contract research, Department of Rapid Transit Systems/ITRI,
Taipei City Government, Dec. 1997.
9. “Inspection Technique for Rolls”, Y.H. Wu, et al., contract research, Ministry of
Economic Affairs/ITRI, Dec. 1997.
10. ”Development of Corrosion Inspection Technique for Piping Supports in
Petrochemical Plants”, Y.H. Wu, et al., contract research, Council of Labor
Affairs/ITRI, Dec. 1998.
11. ”Development of Automated Electromagnetic Method for Inspecting Inner
Surface Cracks on LPG Tanks”, Y.H. Wu, et al., contract research, CPC/ITRI, Dec.
1998.
12. ”Development of Ultrasonic Methods for Weldments and Cladding of RPV”, Y.H.
Wu, et al., contract research, CPC/ITRI, Dec. 2001.
13. ”Feasibility Study of On-stream Ultrasonic Inspection Method for Pipe Inserts”,
Y.H. Wu, et al., contract research, CPC/ITRI, Dec. 2001.
14. ”Inspection and Maintenance Manual for Bridges”, Y.H. Wu, et al., contract
research, Ministry of Transportation and Communication/ITRI, Dec. 2002.
15. ”Development of Energy Saving Techniques and Systems for Buildings”, Y.H. Wu,
et al., contract research, Bureau of Energy, Ministry of Economic Affairs/ITRI,
Dec. 2003.
16. ”Development of On-stream Inspection Methods and Procedure for Weldments on
Hydrogen Absorbers”, Y.H. Wu, et al., contract research, CPC/ITRI, Dec. 2004.
17. ”Development of Porous Catalytic Film made by cultured Plant Tissue for
Mini-scale Fuel Cell Application”, Y.H. Wu, et al., contract research, Ministry of
Economic Affairs/ITRI, Jun. 2005.
18. ”Development of Energy Saving Techniques and Systems for Buildings”, Y.H. Wu,
et al., contract research, Bureau of Energy, Ministry of Economic Affairs/ITRI,
Dec. 2005.
19. ”Promotion of Time to Market TFT Processing Equipments--The development of
TFT glass roller cutter”, Industrial Development Bureau, Ministry of Economic
Affairs/ITRI, Apr. 2007.
20. ”In-manufacturing Quality Control of RPV by TOFD in lieu of RT”, Y.H. Wu, et
al., contract service, CPC/ITRI, Nov. 2007.
21. ”Development of carbon fiber paper for fuel cell electrode- carbonization process”,
Y.H. Wu, et al., contract research, Bureau of Energy, Ministry of Economic
Affairs/ITRI, Dec. 2007.
22. “Development of remote operation RIP inspection method using PAUT technique”,
Y.H. Wu, C.C. Hsiao, contract research, Taipower/ITRI, Dec. 2009.
23. “Development of in-situ inspection methods and procedures for oil tanks ”, Y.H.
Wu, C.C. Hsiao, contract research, China Petroleum Corporation Taiwan/ITRI,
Dec. 2009.
24. “Plan to double the production of TFT Processing Equipments-- The development
of wet coating mold for optical films”, contract research, Industrial Development
Bureau, Ministry of Economic Affairs/ITRI, Nov. 2008.
25. “Inspection and FFS evaluation of crucial structures in refinery”, Y.H. Wu, C.C.
Hsiao, contract research, CPC/Universal Inspection Technologies/ITRI, Mar.
2010.
26. “Development and Validation of the remote operation ultrasonic system and
inspection technique”, contract research, Y.H. Wu, C.C. Hsiao, TPC/CS
technology Ltd./ITRI, Dec. 2009.
27. “Reversed engineering analysis and assessment of dental ceramics”, contract
research, Y.H. Wu, C.C. Hsiao, Betacera Inc./ITRI, Feb. 2011.
28. “Performance evaluation of the PAUT and ECFGI inspection techniques for
ABWR RIP weldment”, contract research, Y.H. Wu, C.C. Hsiao, TPC/PIC/ITRI,
Apr. 2011.
29. “Development of real time ultrasonic inspection method for fuel cell”, Y.H. Wu,
C.C. Hsiao, contract research, Bureau of Energy, Ministry of Economic
Affairs/ITRI, Dec. 2011.
30. “Performance evaluation of the ultrasonic inspection of RPV anchor bolts of
Taipower Kuosheng nuclear power plant unit 1” , Y.H. Wu, TPC/AEC Taiwan,
May. 28, 2012.
31. “Process analysis and assessment of PZT composites”, contract research, Y.H. Wu,
C.C. Hsiao, Betacera Inc./ITRI, Jun. 2012.
32. “Thermal stress analysis of E-4208 and E-2206 waste heat exchanger of hydrogen
dissolution process”, Y.H. Wu, et al., contract service, CPC Taoyuan
refinery/Taiwan University/ITRI, Aug. 2012.
33. “Integrity assessment of equipment structure in refinery”, Y.H. Wu, et al., contract
service, JinLing enterprise Co./CPC Taoyuan refinery/ITRI, Sep. 2012.
34. “Review of the ultrasonic inspection procedure for the RPV anchor bolt of
Taipower Jinshan nuclear power plant”, Y.H. Wu, TPC/AEC Taiwan, Aug. 01,
2012.
35. “Review of the ultrasonic inspection report of RPV anchor bolt of Taipower
Jinshan nuclear power plant unit 1”, Y.H. Wu, TPC/AEC Taiwan, Nov. 10, 2012.
36. “Material testing and energy saving assessment of residential and factory
buildings”, contract research, Y.H. Wu, C.C. Hsiao, Bureau of Energy, Ministry of
Economic Affairs/ITRI, Dec. 2012.
37. “Development of Non-destructive Inspection Techniques for Wind Turbine
Components”, contract research, Y.H. Wu et al., Bureau of Energy, Ministry of
Economic Affairs/ITRI, Dec. 2013.
38. “Inspection of Heat exchanger of hydrogen generation process”, contract service,
Y.H. Wu, C.C. Hsiao, CPC Shell Lubricants Company/ITRI, Nov. 2012.
39. “Review of the ultrasonic inspection report of RPV anchor bolt of Taipower
Jinshan nuclear power plant unit 2”, Y.H. Wu, TPC/AEC Taiwan, Feb. 26, 2013.
40. “Development and Feasibility Study of PAUT technique for Anchor Bolts”, Y. H.
Wu, Invited talk in technical forum of anchor bolt inspection and safety control,
Taipower, May, 2013.
41. “Review of the ultrasonic inspection procedure for the RPV anchor bolt of
Taipower nuclear power plant(ISI-UT-24-6, version 2-PCN1)” , Y.H. Wu,
TPC/AEC Taiwan, Jun. 21, 2013.
42. “Development of PAUT and ACFM methods for wind turbine components and
structure”, Mid-term report of contract research, Y.H. Wu, C.C. Hsiao,
TPC/PIC/ITRI, Jul. 2013.
43. “Development of Manipulator Assisted PAUT Method for In-situ Inspection of
Nuclear RPV Anchor Bolts Mid-term report of contract research, Y.H. Wu, C.C.
Hsiao, TPC/PIC/ITRI, May. 2014.
44. “Defect Characterization and Sizing of Ultrasonic inspection of RPV Anchor
Bolts”, Y.H. Wu, C.C. Hsiao, TPC/PIC/ITRI, Jul. 2015.
45. “Analysis on Engineering Capacity of Offshore Wind Turbine Foundation
Manufacturing”, Bureau Of Energy/ITRI, Feb. 2016.
46. “Using Air Coupled Ultrasound for Defect Detection and Material
Characterization”, Y.H. Wu, S.H. Shi, Cheng-Shin Rubber/Industrial Development
Bureau/Industrial/ITRI, Dec. 2016.
47. “Cracking Analysis of T9a02 Crossing”, C.C. Chuang, Y.H. Wu, CECI
Engineering Consultants/Ministry of Transportation and Communications/ITRI,
Apr. 2017.
48. “Drive Rod Failure Analysis of Taoyuan Airport Metro Surelock T/O UIC60
switch machines-Final Report”, Yung-how Wu, Chin-Chuan Chuang, Marubeni
Corporation Transportation Project Branch, Taipei/Industrial Technology
Research Institutes，Aug. 2019.
49. “Material Selection and Structural FEA for Improving the Drive Rod Assemblies
of Taoyuan Airport Metro Switch Machines”, Y.H. Wu, C.C. Chuang, Marubeni
Corporation Transportation Project Branch, Taipei/Industrial Technology Research
Institutes，Jul. 2019.