Uploaded by Anush Kulen

Oil and Petroleum Test Methods and Standards

advertisement
Oil and Petroleum Test Methods and Standards
Testing, analysis, assays, evaluations, examinations, inspections and certifications to different Oil
and Petroleum test methods, standards, procedures or specifications.






























EPA Method - Soil Screening for Petroleum Hydrocarbons by Immunoassay
EN 228: - Specifications for automotive petrol
ASTM D323 - Standard Test Method for Vapor Pressure of Petroleum Products (Reid
Method)
ASTM D322 - Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by
Distillation
ASTM D97 - Standard Test Method for Pour Point of Petroleum Products
ASTM D95 - Standard Test Method for Water in Petroleum Products and Bituminous
Materials by Distillation
ASTM D94 - Standard Test Methods for Saponification Number of Petroleum Products
ISO 8217:2017 - Petroleum products - Fuels (class F) - Specifications of marine fuels
ISO 91:2017 - Petroleum and related products - Temperature and pressure volume
correction factors (petroleum measurement tables) and standard reference conditions
EN 228: - Specifications for automotive petrol
ISO 8691 - Petroleum products Low levels of vanadium in liquid fuels Determination by
flameless atomic absorption spectrometry after ashing
JIS K 2170 - Reclaimed oil
JIS K 2201 - Gasoline for industrial purpose
JIS K 2201 - Gasoline for industrial purpose
JIS K 2206 - Aviation gasoline
JIS K 2269:1987 - Testing methods for pour point and cloud point of crude oil and petroleum
products
JIS K 2270 - Crude petroleum and petroleum products -- Determination of carbon residue -Part 1: Conradson method
JIS K 2272 - Crude oil and petroleum products -- Determination of ash and sulfated ash
ASME B31.4 - Pipeline Transportation Systems for Liquids and Slurries
ASTM E1943-98(2015) - Standard Guide for Remediation of Ground Water by Natural
Attenuation at Petroleum Release Sites
ASTM F1693-17 - ASTM Standard Guide for Consideration of Bioremediation as an Oil Spill
Response Method on Land
ASTM F2204/F2204M-16 - Standard Guide for Describing Shoreline and Inland Response
Techniques
C1343 - 16 - Standard Test Method for Determination of Low Concentrations of Uranium in
Oils and Organic Liquids by X-ray Fluorescence
ASTM F2798-09 - ASTM Standard Specification for Sealless Lube Oil Pump with Oil
Through Motor for Marine Applications
ISO 16911 - Petroleum products -- Estimation of net specific energy of aviation turbine fuels
using hydrogen content data
ISO 3648 - Aviation fuels - Estimation of net specific energy
ISO 20846 - Petroleum products - Determination of sulfur content of automotive fuels Ultraviolet fluorescence method
ISO 4636 - Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic
Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ISO D5185 - Standard Test Method for Multielement Determination of Used and Unused
Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission
Spectrometry (ICP-AES)
ASTM D803 - Standard Test Methods for Testing Tall Oil






























ASTM D483 - Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray
Oils
API 4709 - Risk-Based Methodologies for Evaluating Petroleum Hydrocarbon Impacts at Oil
and Natural Gas E&P Sites
ASTM D1500 - Standard Test Method for ASTM Color of Petroleum Products (ASTM Color
Scale)
ASTM F1693 - Standard Guide for Consideration of Bioremediation as an Oil Spill Response
Method on Land
ASTM F1209 - Standard Guide for Ecological Considerations for the Use of Oil Spill
Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
ASTM F1231 - Standard Guide for Ecological Considerations for the Use of Oil Spill
Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
ASTM F1210 - Standard Guide for Ecological Considerations for the Use of Oil Spill
Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
NACE 21415 - Potential Effects of Upstream Additives on Refinery Corrosion and Fouling
IEC 62701 - Fluids for electrotechnical applications - Recycled mineral insulating oils for
transformers and switchgear
ISO 3734 - Petroleum products - Determination of water and sediment in residual fuel oils Centrifuge method
ISO 8068 - Lubricants, industrial oils and related products (class L) - Family T (Turbines) Specification for lubricating oils for turbines
ISO 20844 - Petroleum and related products - Determination of the shear stability of
polymer-containing oils using a diesel injector nozzle
ASTM D4304 - Standard Specification for Mineral and Synthetic Lubricating Oil Used in
Steam or Gas Turbines
ASTM D971 - Standard Test Method for Interfacial Tension of Oil Against Water by the Ring
Method
ISO 12500 - Filters for compressed air - Test methods - Part 2: Oil vapours
ISO 3016 - Petroleum and related products from natural or synthetic sources - Determination
of pour point
ISO 2719 - Determination of flash point - Pensky-Martens closed cup method
CSA Z662 - Oil and gas pipeline systems
CSA Z662 - Oil and gas pipeline systems
CSA Z662 - Oil and gas pipeline systems
EPA 006A - Sulfur Dioxide & Carbon Dioxide - Fossil Fuel
IEEE 980 - IEEE Guide for Containment and Control of Oil Spills in Substations
API 10.6 - Manual of Petroleum Measurement Standards Chapter 10.6 Standard Test
Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory
Procedure)
API 10.3 - Manual of Petroleum Measurement Standards Chapter 10.3 Standard Test
Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory
Procedure)
API 13l - Recommended Practice for Laboratory Testing of Drilling Fluids March 1, 2009 API
ASTM D2549 - Standard Test Method for Separation of Representative Aromatics and
Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
ASTM D189 - Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM D2274 - Standard Test Method for Oxidation Stability of Distillate Fuel Oil
(Accelerated Method)
ASTM D2710 - Standard Test Method for Bromine Index of Petroleum Hydrocarbons by
Electrometric Titration
ASTM D5182 - Standard Test Method for Evaluating the Scuffing Load Capacity of Oils
(FZG Visual Method)












IEEE P2740 - Selection and Installation of Electrical Cables and Cable Systems in
Hazardous (Classified) Locations on Oil and Gas Land Drilling Rigs
ASTM D2269-10(2020) - Standard Test Method for Evaluation of White Mineral Oils by
Ultraviolet Absorption
ASTM D4007-11(2016)e1 - Standard Test Method for Water and Sediment in Crude Oil by
the Centrifuge Method (Laboratory Procedure)
ASTM D4006-16e1 - Standard Test Method for Water in Crude Oil by Distillation Active
Standard(Latest Version) Last Updated June 1, 2016
ASTM D3230-19 - Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D6377-20 - Standard Test Method for Determination of Vapor Pressure of Crude Oil:
VPCRx?(Expansion Method)
ASTM D7623-20 - Standard Test Method for Total Mercury in Crude Oil Using CombustionGold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D7622-20 - Standard Test Method for Total Mercury in Crude Oil Using Combustion
and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D8150-17 - Standard Test Method for Determination of Organic Chloride Content in
Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
API - Tank Inspection, Repair, Alteration, and Reconstruction
ASTM D1298-12b(2017): - Standard Test Method for Density, Relative Density, or API
Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D7739-11(2020) - Standard Practice for Thermal Oxidative Stability Measurement via
Quartz Crystal Microbalance
Download