Annex 1 of the Report
to the
Certificate
Z10 067803 0015 Rev. 01
Safety-Related Programmable System
SIMATIC S7 Distributed Safety
Manufacturer:
Siemens AG
Gleiwitzer Str. 555
D-90475 Nürnberg
Report No.: SN87345C-A1
Revision 3.5 dated 2021-09-06
Testing Body:
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Certification Body:
TÜV SÜD Product Service GmbH
Ridlerstrasse 65
D-80339 München
Distribution, copying or any other use of information in this report in part is strictly prohibited.
Revision Log
Version
Name
Date
Changes/History
1.0
J. Blum
2015-12-18 Initial for IEC 61508(ed.2)
1.1
J. Blum
2016-01-19 Release Number 04 added (SN88143T):
•
•
•
1.2
J. Blum
F-DI 8x24VDC HF (6ES7 136-6BA00-0CA0)
F-DQ 4x24VDC/2A PM HF (6ES7 136-6DB00-0CA0)
F-PM-E 24VDC/8A PPM ST (6ES7 136-6PA00-0BC0)
2016-04-21 Release Number 02 added (FM-Approval):
•
F-RQ 1x24VDC/24..230VAC/5A (6ES7 136-6RA000BF0)
2.0
J. Blum
2016-06-06 •
•
•
2.1
C. Dirmeier
2016-10-13 Release Number 05 added (SN90106T):
•
2.2
C. Dirmeier
EN ISO 13849-1:2015 (SN88739T)
IEC 61511-1:2016 (SN88739T)
Replace certificate (Z10 15 11 67803 009 with Z10 16 06
67803 012) due to updated standard
F-PM-E 24VDC/8A PPM ST (6ES7 136-6PA00-0BC0)
2017-01-27 FW Version V5.0.1 added (SN90400T):
•
4 F-DO DC24V/2A (6ES7 138-4FB04-0AB0)
2.3
G.
Effenberger
2017-05-16 New certificate number
Added chapter 1.3
2.4
P. Weiß
2017-07-27 New version of S7 F Configuration Pack (SF91373T):
• V5.5 SP13 added
Module added (SN90962T):
•
2.5
C. Dirmeier
2018-02-02 FW Version V1.0.4 added (SF92057T):
•
2.6
C. Zimmer
P. Weiß
6F-AI HART (6ES7 336-4GE00-0AB0)
2018-07-10 FW Version V1.0.5 added (SF92734T):
•
2.7
F-DQ 8x24VDC/0.5A PP HF (6ES7 136-6DC00-0CA0)
6F-AI HART (6ES7 336-4GE00-0AB0)
2018-09-11 Release Number 05 and FW-Version V1.0.4 added
(SA93017T):
•
F-DQ 4x24VDC/2A PM HF (6ES7 136-6DB00-0CA0)
2.8
C. Zimmer
2018-10-25 Firmware Version V1.0.6 added (SN93084T)
• F-DI 8x24VDC (6ES7 136-6BA00-0CA0)
2.9
J. Blum
2019-01-31 Release Number 02 added (SN93576T)
• ET 200M 8F-DO (6ES7 326-2BF41-0AB0)
Release Number 02 added (SN93577T)
• ET 200M 24F-DI (6ES7 326-1BK02-0AB0)
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-3374; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 2 of 14
2.10
C. Dirmeier
2019-06-17 FW Version V2.0.0 added (s. a. SN92961C-A1):
• ET200SP F-PM-E 24VDC/8A PPM ST (6ES7 1366PA00-0BC0) (SA93094T)
• ET200SP F-DQ 4x24VDC/2A PM HF (6ES7 136-6DB000CA0) (SN93401T)
2.11
T. Paradzik
2020-02-28 Release Number 05 added (Review Protokol F-AI
HART_V1.3):
• ET 200M 6F-AI HART (6ES7 336-4GE00-0AB0)
Release Number 05 and FW-Version V1.0.7 added
(SN94636T):
• ET 200SP F-DI 8x24VDC (6ES7 136-6BA00-0CA0)
FW-Version V2.0.1 added (SN94598T):
• ET 200SP F-DQ 4x24VDC/2A PM HF
(6ES7 136-6DB00-0CA0)
2.12
C. Dirmeier
2020-03-24 Release Number 04 and FW Version 1.0.5 added
(SN94946T)
• ET 200M F-DO 10xDC24V/2A (6ES7 326-2BF10-0AB0)
3.0
P. Weiß
2020-04-27 New certificate number
3.1
C. Dirmeier
2020-11-16 FS added (ReviewProtocolET200S_and_200M_CCC):
• ET 200S:
- 4/8 F-DI DC24V (6ES7 138-4FA05-0AB0)
- 4 F-DO DC24V/2A (6ES7 138-4FB04-0AB0)
- 4 F-DI /3 F-DO (6ES7 138-4FC01-0AB0)
•
ET 200M:
- DI 24 x DC24V (6ES7 326-1BK02-0AB0)
- DO 10 x DC 24V/2A PP (6ES7 326-2BF10-0AB0)
- DO 8 x DC24V/2A PM (6ES7 326-2BF41-0AB0)
- AI 6 x0/4…20mA HART (6ES7336-4GE00-0AB0)
- Safety Protector (6ES7 195-7KF00-0XA0)
• ET 200SP:
- F-DI 8x24VDC HF (6ES7 136-6BA00-0CA0)
- F-DQ 4x24VDC/2A PM HF (6ES7 136-6DB00-0CA0)
- F-DQ 8x24VDC/0.5A PP HF (6ES7 136-6DC00-0CA0)
- F-PM-E 24VDC/8A (6ES7 136-6PA00-0BC0)
Module added (SA92617T, SA93062T, SN95827T)
• ET 200SP F-AI 4xI 0(4)..20mA 2-/4-wire HF (6ES7 1366AA00-0CA1)
3.2
C. Dirmeier
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-3374; Fax: -2933
2020-12-21 FS added (Review Protocol CCC ET200S and ET200M):
• ET 200M:
- F-DI 8 x DC24V NAMUR (6ES7 326-1RF01-0AB0)
• ET 200S:
- 1 F-RO DC24V/5A AC24..230V/5A
(6ES7138-4FR00-0AA0)
- PM-E F PM, DC24V (6ES7138-4CF03-0AB0)
- PM-E F PP, DC24V (6ES7138-4CF42-0AB0)
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 3 of 14
3.3
C. Dirmeier
2021-01-13 FS added (ReviewProtocolET200SP_F-RQ_CCC):
• ET 200SP:
F-RQ 1x24VDC/24…230VAC/5A
(6ES7 136-6RA00-0BF0
3.4
P. Weiß
2021-05-20 New version of S7 F Configuration Pack (SF96889T):
• V5.5 SP13 Upd1 added
FW-Version V2.0.2 added (SN96838T):
•
3.5
C. Dirmeier
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-3374; Fax: -2933
ET 200SP F-DQ 4x24VDC/2A PM HF
(6ES7 136-6DB00-0CA0)
2921-09-06 Module added (SA97304T):
• ET 200SP F-DI 8x24VDC HF (6ES7 136-6BA01-0CA0)
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 4 of 14
Content
1
HARDWARE AND FIRMWARE COMPONENTS ............................................................................6
1.1
CPU`S WHICH ARE SUITABLE FOR SAFETY-RELATED APPLICATIONS BY USING A FAIL-SAFEAPPLICATION PROGRAM ...........................................................................................................................6
1.1.1
CPU ET 200S ...................................................................................................................6
1.1.2
CPU ET 200pro ................................................................................................................6
1.1.3
CPU S7-300 ......................................................................................................................6
1.1.4
CPU S7-400 * ...................................................................................................................7
1.1.5
Soft-PLC ...........................................................................................................................7
1.2
F-MODULES................................................................................................................................8
1.2.1
ET 200SP .........................................................................................................................8
1.2.2
ET 200M ...........................................................................................................................8
1.2.3
ET 200S ............................................................................................................................9
ET 200pro ...................................................................................................................................... 10
1.2.4
ET 200eco ..................................................................................................................... 10
1.2.5
ET 200iSP ...................................................................................................................... 10
1.2.6
Interference-Free Components ..................................................................................... 11
1.3
USE WITH COMPONENTS LISTED IN CERTIFICATE SIMATIC SAFETY SYSTEM ............................... 11
2
SAFETY-RELEVANT SOFTWARE COMPONENTS ................................................................... 12
3
NON-SAFETY RELEVANT SOFTWARE COMPONENT............................................................. 14
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-3374; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 5 of 14
Safety-Certified and Interference-Free Components
1 Hardware and Firmware Components
The following system components are certified ‘safety-related’. This allows the components
to be used to process safety critical signals and functions:
1.1 CPU`s which are suitable for safety-related applications by using a fail-safeapplication program
1.1.1 CPU ET 200S
Name
Order Number
IM151-7 F-CPU
6ES7 151-7FA21-0AB0
Release Number / Firmware
Version
01 or higher / V3.3.2 or higher
IM151-8F PN/DP
6ES7 151-8FB01-0AB0
01 or higher / V3.2.1 or higher
Name
Order Number
IM154-8F PN/DP
6ES7 154-8FB01-0AB0
Release Number / Firmware
Version
01 or higher / V3.2.1 or higher
IM154-8FX PN/DP
6ES7 154-8FX00-0AB0
01 or higher / V3.2.5 or higher
Name
Order Number
CPU315F-2 DP
6ES7 315-6FF04-0AB0
Release Number / Firmware
Version
01 or higher / V3.0.0 or higher
CPU315F-2 PN/DP
6ES7 315-2FJ14-0AB0
01 or higher / V3.1.0 or higher
CPU317F-2 DP
6ES7 317-6FF04-0AB0
01 or higher / V3.3.1 or higher
CPU317F-2 PN/DP
6ES7 317-2FK14-0AB0
01 or higher / V3.1.0 or higher
CPU317TF-3 PN/DP
6ES7 317-7UL10-0AB0
01 or higher / V3.2.9 / 4.1.5 or higher
CPU319F-3 PN/DP
6ES7 318-3FL01-0AB0
01 or higher / V3.2.0 or higher
1.1.2 CPU ET 200pro
1.1.3 CPU S7-300
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-3374; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 6 of 14
1.1.4 CPU S7-400 *
Name
Order Number
CPU414F-3 PN/DP
6ES7 414-3FM06-0AB0
Release Number / Firmware
Version
01 or higher / V6.0.0 or higher
CPU414F-3 PN/DP
6ES7 414-3FM07-0AB0
01 or higher / V7.0.0 or higher
CPU416F-2 DP
6ES7 416-2FN05-0AB0
01 or higher / V5.0.1 or higher
CPU416F-2 DP
6ES7 416-2FP07-0AB0
01 or higher / V7.0.0 or higher
CPU416F-3 PN/DP
6ES7 416-3FS06-0AB0
01 or higher / V6.0.0 or higher
CPU416F-3 PN/DP
6ES7 416-3FS07-0AB0
01 or higher / V7.0.0 or higher
*) The sinusoidal vibrations service conditions do not comply with the increased requirements of IEC
61131-2 2nd and 3rd Ed. The requirements of IEC 61131-2:1992 are fulfilled.
1.1.5 Soft-PLC
Name
Order Number
WinAC RTX F 2010
-
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-3374; Fax: -2933
Release Number / Firmware
Version
--- / V4.5.0 or higher
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 7 of 14
1.2 F-Modules
1.2.1 ET 200SP
Module
F-DI 8x24VDC HF
Order Number
6ES7 136-6BA00-0CA0
Release Number / Firmware Version
01 to 06 / V1.0.5, V1.0.6, V1.0.7
Module Description
8 channel digital input module 24VDC
F-DI 8x24VDC HF
6ES7 136-6BA01-0CA02
01 / V1.0.0
8 channel digital input module 24VDC
F-DQ 4x24VDC/2A PM HF
6ES7 136-6DB00-0CA0
01 to 06 / V1.0.3, V1.0.4, V2.0.01,
V2.0.11, V2.0.21
4 channel digital output module
24VDC
F-DQ 8x24VDC/0.5A PP HF
6ES7 136-6DC00-0CA0
01 to 02 / V1.0.0
8 channel digital output module
24VDC
F-PM-E 24VDC/8A PPM ST
6ES7 136-6PA00-0BC0
01 to 06 / V1.0.5, V2.0.01
power module 24VDC; P- / M-switch
F-RQ
1x24VDC/24..230VAC/5A
6ES7 136-6RA00-0BF0
01 to 03
1 channel digital relay output module
24VDC/5A, 24…230VAC/5A
F-AI
4xI 0(4)..20mA 2-/4-wire HF
6ES7 136-6AA00-0CA1
01 to 03 / V1.0.0, V1.0.1, V1.0.2
4 channel analog input module
0(4)..20mA
1)
2)
Can only be used as a replacement for modules with V1.0 parameterization
Can only be used as a replacement for modules with order number 6ES7 136-6BA00-0CA0
1.2.2 ET 200M
Module
DI 24 x DC24V
Order Number
6ES7 326-1BK02-0AB0
Release Number / Firmware Version
01 to 03
Module Description
24 channel digital input module
24VDC
DI 8 x NAMUR
6ES7 326-1RF01-0AB0
01 to 02
8 channel NAMUR digital input
module for intrinsically-safe sensors
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-3374; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 8 of 14
DO 10 x DC 24V/2A PP
6ES7 326-2BF10-0AB0
03 to 05 / V1.0.2, V1.0.5
10 channel digital output module
24VDC/2A, P-switch
DO 8 x DC24V/2A PM
6ES7 326-2BF41-0AB0
01 to 03
8 channel digital output module
24VDC/2A, P/M-switch
AI 6 x 0/4…20 mA HART
6ES7 336-4GE00-0AB0
04 to 06 / V1.0.3, V1.0.4, V1.0.5
6 channel analog input module, HART
Safety Protector
6ES7 195-7KF00-0XA0
04 to 05
Safety protector protects the fail-safe
signal modules from possible
overvoltage
Module
4/8 F-DI DC24V
Order Number
6ES7 138-4FA05-0AB0
Release Number / Firmware Version
01 to 02 / V6.0.3
Module Description
4/8 channel digital input module
24VDC
4 F-DO DC24V/2A
6ES7 138-4FB04-0AB0
01 to 02 / V5.0.0, V5.0.1
4 channel digital output module
24VDC/2A; P/M switch
4F-DI/3F-DO
6ES7 138-4FC01-0AB0
02 to 03
4 channel digital input / 3 channel
digital output module 24VDC/2A
1F-RO DC24V/5A,
AC24...230V/5A
6ES7 138-4FR00-0AA0
03 to 04
1 channel digital relay output module
DC24V/5A, AC24…230V/5A
PM-E F pm DC24V
6ES7 138-4CF03-0AB0
02 to 03
Power module 24VDC; P/M switch
PM-E F pp DC24V
6ES7 138-4CF42-0AB0
02 to 03
Power module 24VDC; P/P switch
PM-D F DC24V
3RK1903-3BA02
01
Power module 24VDC for failsafe
motor starters
1.2.3 ET 200S
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-1473; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 9 of 14
ET 200pro
Module
8/16 F-DI DC24V
Order Number
6ES7 148-4FA00-0AB0
Release Number / Firmware Version
06
Module Description
8/16 channel digital input module
24VDC
4/8 F-DI/4 F-DO DC24V/2A
6ES7 148-4FC00-0AB0
06
4/8 channel digital input 24VDC and 4
channel digital output module
24VDC/2A P- / M-switch (combined)
F-Switch
6ES7 148-4FS00-0AB0
03
2 channel digital input 24VDC and 3
channel digital P- / P-switch module
24VDC (combined)
Order Number
6ES7 148-3FA00-0XB0
Release Number / Firmware Version
05
Module Description
4/8 channel digital input module
24VDC
Module
4F-DO Ex 17,4V/40mA
Order Number
6ES7 138-7FD00-0AB0
Release Number / Firmware Version
02 / V1.0.1
Module Description
4 channel digital output module
17,4VDC/40mA PP-switch
8F-DI Ex NAMUR
6ES7 138-7FN00-0AB0
02 / V1.0.1
8 channel NAMUR digital input
module
4F-AI Ex HART
6ES7 138-7FA00-0AB0
02 / V1.0.1
4 channel analog input module, HART
1.2.4 ET 200eco
Module
4/8 F-DI DC24V
1.2.5 ET 200iSP
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-1473; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 10 of 14
1.2.6 Interference-Free Components
All other components of the S7 family are 'interference-free' and allowed to be used; however, they are not certified for process safety critical
signals and functions. Using these components does not interfere with the proper functioning of the safety-related modules. For details on
architectural, configuration and implementation requirements please refer to the corresponding user manuals.
1.3 Use with components listed in certificate SIMATIC Safety System
The following components can also be used with components listed within the certificate of SIMATIC Safety System:
-
F-CPUs: CPU ET 200S, CPU ET 200pro, CPU S7-300, CPU S7-400 and Soft-PLC
F- modules: ET 200SP, ET 200M, ET 200S, ET200pro, ET 200eco and ET 200iSP.
For details, please see chapter 2.4 of report to the certificate of SIMATIC Safety System.
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-1473; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 11 of 14
2 Safety-Relevant Software Components
Software Component / Name
S7 Distributed Safety Programming
Version
V5.4
SP5
S7 F-Configuration Pack
V5.5
SP11/12/13 inkl. Upd1
The Optional Package S7 Distributed Safety includes the following F application blocks and F
system blocks:
Symbolic name
F_SCA_I
Function in safety program
F application block
Signature
D8CA
Initial value signature
2452
F_CTU
F application block
8AC9
2452
F_CTD
F application block
F77D
2452
F_CTUD
F application block
7C8F
2452
F_TP
F application block
669E
980D
F_TON
F application block
6B7E
980D
F_TOF
F application block
14B4
980D
F_ACK_OP
F application block
351F
A150
F_2HAND
F application block
EEB8
6EF7
F_MUTING
F application block
606B
AF14
F_1oo2DI
F application block
6AA7
2C7D
F_2H_EN
F application block
26CD
6EF7
F_MUT_P
F application block
CB71
7D3C
F_ESTOP1
F application block
2E11
AE5E
F_FDBACK
F application block
F521
F965
F_SFDOOR
F application block
86DA
76E6
F_ACK_GL
F application block
8B12
F2DE
F_SENDDP
F application block
F0B9
4E03
F_RCVDP
F application block
42F1
54E4
F_SENDS7
F application block
71D7
9BFF
F_RCVS7
F application block
4D3C
E1A5
F_SHL_W
F application block
4D39
-
F_SHR_W
F application block
E4E3
-
F_BO_W
F application block
20A5
-
F_W_BO
F application block
BD67
-
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
hone: +49 (89) 5791-1473; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 12 of 14
Symbolic name
F_INT_WR
Function in safety program
F application block
Signature
A78A
Initial value signature
-
F_INT_RD
F application block
BA20
-
F_CTRL_1
F system block
504C
BED91
F_CTRL_2
F system block
40BA
9E40
F_IO_BOI
F system block
FAFA
B79C
F_RTGCO2
F system block
D292
7A4A 2
F_IO_CGP
F system block
EDA2
DC2F
F_DIAG_N
F system block
99CA
3612
FISCA_I
F system block
A0FB
50E4
FICTU
F system block
2304
A28F
FICTD
F system block
7AC0
A28F
FICTUD
F system block
E51F
E876
FITP
F system block
7E15
3326
FITON
F system block
E1DF
ED43
FITOF
F system block
69AF
3326
FIACK_OP
F system block
BDC3
B593
FI2HAND
F system block
7131
F85A
FIMUTING
F system block
D5F9
B0C4
FI1oo2DI
F system block
C2E2
AEAA
FI2H_EN
F system block
6855
5F72
FIMUT_P
F system block
E8D5
2C45
FIACK_GL
F system block
9FB4
D360
FISHL_W
F system block
146E
8E58
FISHR_W
F system block
AB8F
8E58
FIBO_W
F system block
963B
BED5
FIW_BO
F system block
7A7F
BED5
FIINT_WR
F system block
CFA9
980D
FIINT_RD
F system block
1D3F
980D
1) To
difference the modification of F_CTRL_1 in version 5.4 SP5 from previous versions it is necessary
to consider the F_CTRL_1 version (header) 1.6.
2) To difference the modification of F_RTGCO2 in version 5.4 SP5 from previous versions it is necessary
to consider the F_CTRL_1 version (header) 1.1.
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-1473; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 13 of 14
3 Non-Safety Relevant Software Component
Function
STEP 7
Version
V5.3 + Service Pack 3 or higher 4
3
Munich,
TÜV SÜD Rail GmbH
Rail Automation
Technical Certifier
Digital signiert von
Claudio Gregorio
Datum: 2021.09.06
12:45:22 +02'00'
3)
Further restrictions specific to modules or versions of the optional package S7 Distributed Safety can
be found in the corresponding user documentation.
4)
STEP7 V5.7 (or higher) may only be used in conjunction with F Configuration Pack V5.5 SP13 Upd1
(or higher).
TÜV SÜD Rail GmbH
Rail Automation
Barthstrasse 16
D-80339 München
Phone: +49 (89) 5791-1473; Fax: -2933
Report No.: SN87345C-A1
Revision 3.5
P. Weiß
2021-09-06
Page 14 of 14