Uploaded by gulfstreaminfotech007

A Guidance About Dynacord Amplifiers

advertisement
A Guidance About
Dynacord Amplifiers
Power amplifiers form a major part of any event in
today’s time. A good amplifier works like nothing
else for a big event or party. The sole
responsibility of driving PA speakers and
microphones in the correct way is on the power
amplifier.
So, without it converting electronic signals into
sound waves, the party would not be successful. You
need to consider a few things first to understand
what kind of an amplifier you need for your event. A
Dynacord sound system is something to look out for.
2
Active or Passive
In the active or powered amplifiers, the
speakers and the amp are housed together in a
single unit. However, in PA systems, the
single power amplifiers are the driving force
behind the speakers and monitors.
3
▪ The unpowered versions are better if you want
the sound system to grow with time.
▪ The one with the single unit can be a little
tricky to deal with.
▪ This is because if the amp gets damaged in any
way, you might have to replace the entire
system.
▪ It will cost you more than you would intend to
spend.
4
Power
Specifications
The most important task of a power amplifier
is the kind of power it can provide. In most
cases, the power is measured differently, but
always in watts. There are two kinds of them.
5
▪ Peak watts that are used to measure the minimum
power that the amplifier can provide at a
point.
▪ Continuous watts are used to measure the
average amount of watts that the amplifier can
provide at the maximum.
Each user manual will have a different measurement
standard on them. So, read it carefully before you
make a choice. It is a bad idea to ever try to
compare these two kinds of watts because they
cannot be judged by the same standards.
6
Modes
An amplifier has multiple modes that you need
to learn about. These configurations can be
adjusted according to your needs.
▪ In the Stereo mode, a stereo soundstage is
created by connecting the right and left
outputs to the amplifier.
▪ In the Parallel mode, the output source
remains one and is connected to the amp’s
channels. Source
7
Contact Us
ABU DHABI:
DUBAI:
Behind Royal Rose Hotel,
Electra Street
Silicon Oasis
Abu Dhabi.
Telephone: 02 6777222
Telephone: 04 3251796
E-mail:
aj@gulfstreaminfotech .com
WhatsApp No: 056 9923000
E-mail:
info@gulfstreaminfotech.com
8
www.gulfstreaminfotech.com
9
Download