WALCHAND INSTITUTE OF TECHNOLOGY, SOLAPUR CIVIL ENGINNERING DEPARTMENT FACULTY RECRUITMENT TEST-2021-22 Software Proficiency Test: Duration: One Hour Subject: Transportation Engineering Marks: 40 Date: 16/09/2021 Problem Statement: Design the horizontal and vertical alignment of a Two-Lane National Highway using MX Road Software. The required data for the design are given below: 1. Design Speed: 100Kmph 2. Length of Project: 12Km 3. Width of Carriageway: 10m (7.0+1.5mPaved Shoulder+1.5Paved Shoulder) 4. Width of Earthen Shoulder: 2m on both side 5. Side Slope: 2.5:1 6. Widening on Curves: 0.6m on both side 7. Minimum Radius: 300m 8. Minimum Superelevation: 2.5% (Pavement is rotated with respect to inner edge) 9. Minimum Sight Distance: 120m 10. Minimum Length of Transition curve: 40m 11. Minimum length of vertical curve: 60m 12. Minimum vertical gradient: 0.5% 13.Pavement Thickness: BC-40mm, DBM-100mm, WMM-250mm, GSB-200mm and SG-500mm. Note: 1) Consider missing data as per IRC guidelines 2) Topographical data available for the design is in CSV Points format (X, Y, Z) Submit Plan, Profile and one cross section either in cutting or filling in AutoCAD format. Assessment Rubrics: MX Road Software Proficiency Sl. No Name of Candidate 01 Mr.Ganiger Vikas Importing Points Data (Out of 5 Marks) Creation of Triangulation (Out of 5 Marks) Design Horizontal Alignment (Out of 5 Marks) Design Vertical Alignment (Out of 5 Marks) Design Superelevation (Out of 5 Marks) Design Curve Widening (Out of 5 Marks) Creating Cross section (Out of 5 Marks) Generating drawing in AutoCAD (Out of 5 Marks) Chandrashekhar 02 Mr.Miyalal Firoj 03 Mr.Vinod Navalgund 04 Mr.Manjunath Ishwar Borakanavar Total Marks (Out of 40 Marks) Ashok Kumar N Rajanavar (Subject In-charge) Dr. S. S. Patil (Head of Department)