K3A & K5A
USER MANUAL
KISAN ELECTRONICS CO., LTD.
Version 1.00
April 2018
CONTENT
NO.
CATEGORY
ITEM
DESCRIPTION
00
Main Screen
01
Function Key
(Start/Stop) Key
Count Start/Stop
02
Function Key
(Mode) Key
Mode Switch/ change
03
Function Key
(Batch) Key
Change the Batch Value
04
Function Key
(Data) Key – 1
Check the data (when button short press)
05
Function Key
(Data) Key – 2
Check the data(when button long press)
06
Function Key
(Denom & Add & Menu) Key
set up banknote sorting mode, Select Menu , ADD Mode
07
Function Key
(Print & Clear) Key
Print or clear count
Main Screen Configuration
NO.
CATEGORY
ITEM
00
Main Screen
-
Mode
Currency
DESCRIPTION
Option
(On/Off)
Time
Count
Viewer
Reject
Function
key
NO.
CATEGORY
ITEM
01-01
Function Key
(Start/Stop) Key
DESCRIPTION
[START / STOP Button]
- Count Start/Stop
- Backspace function.
- Clear Path Jam.
※ If the banknote has jammed inside
the Machine. you can use this
button(also front hardware button) for
machine motor run which clear for
inside of jammed banknote.
지폐를 장비에 적재
START/STOP 클릭 ( 계수동작 )
팝업 표시 상태
계수화면 클릭 시
클릭 시 (Back)
NO.
CATEGORY
ITEM
01-02
Function Key
(Mode) Key
DESCRIPTION
[MODE button]
– Button press short: change mode
( Auto → Fitness → Free)
VALUE 모드
– Button press short: The mode
change configuration.
FITNESS 모드
FREE 모드
NO.
CATEGORY
ITEM
01-03
Function Key
(Batch) Key
DESCRIPTION
[BATCH Button]
– Button press short: The batch value
change.
( 0 → 10 → 20 → 50
→ 100 → 150 →200 )
장수(PIECE) 배치
– Button press long: The batch
configuration screen show up.
금액(AMOUNT) 배치
NO.
CATEGORY
ITEM
01-04
Function Key
(Data1) Key
DESCRIPTION
[DATA Button - 1]
– Button press short:
count total
Count Result
Banknote serial number
COUNT RESULT
COUNT VIEW (Click)
COUNT TOTAL
SERIAL No.
COUNT HISTORY
COUNT HISTORY (View)
NO.
CATEGORY
ITEM
01-05
Function Key
(Data2) Key
DESCRIPTION
[DATA Button - 2]
– Butten press long :
changing the screen of count log.
INSERT & SKEW
APL Log
Reco Log
NO.
CATEGORY
ITEM
DESCRIPTION
01-06
Function Key
(Denom, Add, Menu) Key
-
[DENOM Button]
[ADD Button]
– set up banknote sorting mode
( Mix → Auto → Denom )
– ADD Mode ( On/Off )
[MENU Button]
[HOT KEY Button]
- Pressed short.: HOT KEY function
– The Fitness level Adjust function.
( When the fitness mode)
– Pressed long: enter the setup mode.
(PW 0987)
– Data Backup function
(if the machine connected with usb
flash driver.)
– Patch APL
(If the USB flash drive has the patch
file.)
※ Some time,the function screen
doesn't has showing up as same this
the screen.
[Enter the SETUP Mode]
NO.
CATEGORY
ITEM
DESCRIPTION
01-07
Function Key
(Print, Clear) Key
-
[PRINT Button]
- printed out count information.
[CLEAR Button]
- Clear Count information(CLEAR)
- before Screen menu or cancel the
function (CANCEL)
※ Turn off pop-up screen.
계수 데이터 클리어
END