SEA9526
,
OWNER S MANUAL
Marine Audio System
PWR
VOL-
SCAN
PUSH/SEL
BND/LD
VOL+
MUT
DSP
MODE
AS/PS
1 PAU
2 INT
4 RDM
3 RPT
5
6
CLK
MONO
OPEN
DIRECT-IN PLAY POWER LOADING
TOP/REPEAT/RANDOM/SCAN
3-BEAMLASER TRACKING SYSTEM
DUAL 1-BIT D/A CONVERTERS
24 AM/FM PRESET STATIONS
SEEK UP/DOWN
PRESET SCAN AND AUTO SEARCH
AM/FM/MPX WITH
SINGLE CD PLAYER
Downloaded from www.Manualslib.com manuals search engine
ER
OW atts
P
W
GH
HI X 35 ax.
M
4
COMPACT
RCA
RCA LINE
LINE OUT
OUT
DIGITAL AUDIO
SPECIFICATIONS
CONTENTS
Contents...................................................................... ..... .. ...... ............1
CD PLAYER
Installation.............................. ........ ......... .. ......... ..... .......... . ..................2
Signal / Noise Ratio ...........................................
Frequency Response ................................
Channel Separation .............................................
D / A Converter ...................................................
Installation and removing the unit...................... ......... .... . .........................3
> 65 dB
20 Hz~20KHz
> 62 dB
16 Bit
Using the Detachable Front Panel........................ ... .. ................... ...............4
Wiring Diagram................... ..... .......................................... ..................... .5
FM Tuner
Basic Functions ............................. ........ ............................ ...................... 6
Tuning Range .............................................
FM Mono Sensitivity ...........................................
50 dB quieting sensitivity ...................................
Stereo Separation @ 1 Khz .................................
Basic Operation........ ... .................................................................... ....... 7
87.5-107.9 Mhz
12 dB
16 dB
30 dB
Radio Operation..................................................................... ... ....... ....... 8
AM Tuner
CD Player Operation............. ... .......................................................... ...... 9
Tuning Range ..........................................
AM Sensitivity ......................................................
Specif ications................ .... .............................................. ...................... 10
530-1710 Khz
30 dB
AMPLIFIER
Output Power ............................
140 WATTS MAXIMUM
35 WattsX4 Channels
T. H. D. ..............................................................................................
Bass ............................................................................................
0.5 %
+/ - 12dB
Treble ............................................................................................ +/ - 12dB
GENERAL
Operating Power ..............
12 Volts DC, Negative Ground
Output Wiring.........
Designed for using four speakers only
Front and Rear Channels
RCA line out........................
RCA low-level outputs - 500 mV.
Compatible 4 to 8 Ohm Speakers
Output Impedance .......................
1 amp and 10 amp
Fuses .........................................................................
178mm(W) x 146mm(D) x 51mm (H)
Dimensions ..................................
2.6 Kg
Weight .........................................................................................
1
Downloaded from www.Manualslib.com manuals search engine
10
DSP
MODE
1 PAU
2 INT
3 RPT
4 RDM
5
CLK
6
MONO
1
182
2
53
3
﹝
30
DSP
MODE
1 PAU
2 INT
4 RDM
3 RPT
5
6
CLK
9
Downloaded from www.Manualslib.com manuals search engine
MONO
2
INSTALLATION AND REMOVING THE UNIT
1
RADIO OPERATION
Removing the unit
6
RADIO BAND
2
3
Press the BD/LD button to operate the radio function.
There are 3 sets total for FM band (FM1, FM2, FM3)
There is 1 set AM band (MW)
Up to 6 preset stations can be stored for each set.
1
5
7
4
Front Panel
(Fig.2)
SCAN
BND/LD
AS/PS
OPEN button
TUNE/SEEK
1. Dashboard
1. In radio mode, press the BD/LD button to choose band. Every
time this button is pressed, the new band shows on the display.
2. Nut(5mm)
3. Spring washer
F1
F2
MW
4. Sc rew(5X25mm)
5. Screw
6. Strap
Be sure to use the strap to secure the
back of the unit in place. The strap can
be bent by hand to the desired angle.
7. Plain washer
1. Before removing the unit, press the
OPEN button to slide down the front
SCAN
BND/LD
2
F3
AS/PS
2. Press the UP or DN button to move the radio frequency up or
down. Press any preset button for 2 seconds to store the desired
station.
3. Repeat above steps to seek and store other stations.
4. Press the AS/PS button for 2 seconds until the unit starts to
automatically seek strong stations and stores them in memory.
5. At radio mode, press the SCAN button to scan through all
strong stations 5 seconds on each one.
During this 5 seconds press the button again, to stop on a
desired station.
6. In FM Radio, press MON (Mono/St)button to select stereo or
mono reception. Only stereo is shown on the Display.
SCAN
BND/LD
AS/PS
panel.
2. Lever
lnsert the levers supplied with the unit
DSP
MODE
1 PAU
2 INT
3 RPT
5
4 RDM
6
CLK
MONO
into the grooves in the housing (as
shown in f igure) until they click. Pull
SELECTING A PRESET
the levers to remove the unit from
Press preset button 1-6 to listen to a stored station of
your choosing.
the dashboard.
DSP
3
Downloaded from www.Manualslib.com manuals search engine
MODE
1 PAU
2 INT
8
3 RPT
4 RDM
5
6
CLK
MONO
USING THE DETACHABLE FRONT PANEL
BASIC OPERATION
To Detach the Front Panel:
POWER ON/OFF
VOLUME
Press the power button to
turn the unit on. Press it
again to turn it off.
To adjust volume level,
turn knob left or right.
To Reinstall the Front Panel:
1. Press the OPEN button,
PWR
1. When the panel bracket is in slide down
the front panel will slide down.
position, insert the front panel into the
panel bracket, then push the front panel
from the middle to slide it up.
TREBLE
PUSH/SEL
BASS
1. Press SEL button twice,
to display TRE
2.To adjust TRE level, turn
knob left or right.
1. Press SEL button once,
to display BASS.
2. To adjust BASS level,
turn knob left or right.
Open
Bottom
button
FADER
PUSH/SEL
BALANCE
1. Press select button four
times, to display FAD
2. To adjust FAD level, turn
knob left or right.
1. Press select button three
times, to display BAL
2. To adjust BAL level, turn
knob left or right.
2. When the front panel slides down, press
2. When the panel bracket is in slide up
the bottom button of the front panel
upward and pull out from the panel
position, insert one side of the front panel
bracket.
to its proper position and push the other
side into the panel bracket. A 'click'
sound should be heard.
DSP
Press this function button to choose between CLASSIC, ROCK or POP.
MUTE
Press the MUTE button to keep the unit in silent mode. Press
MUTE again. To resume normal listening.
MUT
DSP
MODE
1 PAU
2 INT
3 RPT
5
4 RDM
6
Front panel
CLK
MONO
Bottom
button
3. For safekeeping, store the front panel in
the supplied protective case immediately
CLOCK SETTING/DISPLAY
after being remoed.
1. To display the current time, press the CLK button once. The
display will return to normal status after f ive seconds.
2. To adjust the time, press the CLK button to display the
current time. Press and hold the button again while using the
up or down buttons to adjust the minute and hour. .
Protective Case
3. Note that if the front panel fails to lock
in position properly, the control button
may not function and LCD display may
be missing some segments.
SCAN
To eliminate this problem press the
BND/LD
AS/PS
open button and then re-install the
DSP
MODE
1 PAU
2 INT
3 RPT
4 RDM
5
6
CLK
front panel again.
MONO
Front panel
7
Downloaded from www.Manualslib.com manuals search engine
4
FUNCTIONS
WIRING DIAGRAM
Follow this easy wiring diagram to install new or existing Radio and Speaker Wiring System.
Warning:
This unit is designed for use with 4 speakers; however, it can be installed using only 2 speakers.
If installing 2 speakers, do not connect front and rear speaker leads together. Use either the
front or rear leads insulating the unused wires. Never ground negative speaker leads to the
chasis ground of the boat.
1
8 9
11 23 10 13
14
PWR
VOL-
SCAN
PUSH/SEL
BND/LD
CDC Connector
RCA Connector
REMOTE
Connector
AUX Connector
VOL+
MUT
5
DSP
4
AS/PS
MODE
7
1 PAU
2 INT
3 RPT
4 RDM
20
21
18
19
5
16
6
CLK
17
6
MONO
OPEN
22 2 3 24
15
12
OUTPUT LINE PLUG
Blue
Power
Antenna
Red
Ignition
Switch(B+)
Memory
Back-up Yellow
10A FUSE
Ground(B-) Black
4-Speaker System
Front
Lch.SPK
Rear
Lch.SPK
4-Speaker System
White
Grey
White/Black
Grey/Black
Green
Violet
Green/Black
Violet/Black
5
Downloaded from www.Manualslib.com manuals search engine
Front
Rch.SPK
Rear
Rch.SPK
1. POWER ON/OFF
13. EJECT
2. BD/LD (FM1-FM2-FM3-MW)
14. FUNCTION LCD DISPLAY
3. SEEK & STORE AUTOMATICALLY
15. DISC SLOT
4. SOUND EFFECT SELECT BUTTON
16. PRESET STATION 5
5. MUTE BUTTON
17. PRESET STATION 6
6. CLOCK BUTTON
18. REPEAT PLAY/ PRESET STATION 3
7. CD /RADIO MODE SELECT
19. RANDOM PLAY/ PRESET STATION 4
8. AUDIO CONTROL ENCODER SWITCH
20. PAUSE/PRESET STATION 1
9. AUDIO CONTROL MODE SELECT BUTTON
21. TRACK SCAN/ PRESET STATION 2
10. SEEK/SELECT TRACK/FAST FORWARD
22. MONO/STEREO SELECT BUTTON
11. SEEK/SELECT TRACK/FAST REVERSE
23. STATION SCAN UP BUTTON
12. RESET BUTTON
24. PANEL RELEASE BUTTON
6