기계절삭 전용 유한요소해석 프로그램 - AdvantEdge - 대전광역시 유성구 관평동 1335번지 TEL.042-472-7394~5 FAX.042-472-6394 구입문의:담당자 장충식 차장 HP.010-5405-2481 E-mail. csjang@promill.com Third WaveSystems AdvantEdge? 개발사 : 미국, Third Wave Systems 사 기계 절삭 가공 전용 해석 프로그램 material-physics-based machining modeling software AdvantEdge Machining Modeling Environment AdvantEdge FEM Module: AdvantEdge Production Module: Micro/Detailed cutting tool analysis Macro/Process level analysis Forces, temperature, heat flow Cycle time reduction Chip formation Maximize Machine Utilization Work hardened layer Residual stress Third Wave AdvantEdge FEM Predicts: Cutting Forces Chip Formation Temperatures Heat Stresses Residual Stress More information than testing alone. Chip Formation Cutting Tool AdvantEdge FEM Overview AdvantEdge GUI – Model Set Up 절삭종류의 정의 AdvantEdgeTM Analysis Engine Edge Setup 형상 및 물성치 정의 Third Wave Engine 일괄작업처리 절삭공정 변수정의 결과분석 Edge Viewer 필요 데이터 취득 AdvantEdge FEM-GUI 3D Analysis 2D Analysis Milling Turning Climb Milling Turning Conventional Milling Sawing Grooving Broaching AdvantEdge FEM-Material Library 시험으로 검증된 물성 Library 제공 공구 Carbide계, Ceramic계 초경합금, 고속도강 (HSS) 등 공구 coating재 TiN, TiCN, AL2O3 등 피삭재 Al계열, Copper, Inconel AISI 1000 계열, 4140. 4340 304, 416, 465 등의 SST Ductile & Grey Cast Iron Aermet 100 15-5PH (Custom 7000) Titanium 계열 User Library 정의 AdvantEdge FEM-Tools and Workpiece 공구 Sanvic library 제공 사용자 정의 형상 강제 진동량의 적용 피삭재 기본 형상/ 사용자 정의 Composite 열적/기계적 경계조건 AdvantEdge FEM- Coolant Modeling Coolant Modeling Flood Coolant Excluded Vicinity Focused Coolant AdvantEdge FEM-Residual Stress, Chip… Residual Stress Data Extraction Chip Prediction and Control Project Name: RS_Ti 700 Position Left Position Center Position Right 600 500 Stress-XX (MPa) 400 300 200 100 0 -100 -200 -300 -400 Frame 001 11 Oct 2001 No Data Set 0 Third Wave AdvantEdge 0.1 0.2 0.3 Depth from Workpiece Surface 0.4 1.4 Y (mm) 1.2 1 0.8 0.6 1 45 40 Y 35 30 Left 1.5 X (mm) Right Center 0.5 Stress-XX (MPa) 410.187 273.718 137.248 0.778562 -135.691 -272.161 -408.63 -545.1 -681.57 -818.039 -954.509 -1090.98 -1227.45 -1363.92 -1500.39 2 AdvantEdge FEM- Geometry Import Nastran Data Import STL Insert Geometry Import AdvantEdge FEM- Simulation Results Capabilities: Cutting and feed forces Temperatures and heat flow Residual stress Tecplot visualization Compare multiple models & data files Evaluate, visualize, & export solutions AdvantEdge FEM- Results Visualization Cutting Forces Tool and Workpiece Temperatures Tool Wear Residual Stress AdvantEdge FEM- Simulation Examples AdvantEdge FEM- Simulation Examples Chip Morphology AdvantEdge FEM- Simulation Examples Chip Morphology AdvantEdge FEM- Simulation Examples Torque Prediction Torque Vs. Time plot output for all the rotating tool cases in 2D and 3D simulations (Milling, Drilling) AdvantEdge FEM- Simulation Examples Ball Nose Milling AdvantEdge FEM- Simulation Examples Milling AdvantEdge FEM- Simulation Examples Drilling Simulation AdvantEdge FEM- Simulation Examples Drilling AdvantEdge FEM- Simulation Examples Grooving Simulation AdvantEdge FEM- Simulation Examples Turning Orthogonal Turning Nose Turning Oblique Turning AdvantEdge FEM- Simulation Examples Slittering Threading AdvantEdge Production AdvantEdgeTM Production 구성 모듈 GM이 US $20M을 투입해 개발 TCSim: Turning Module MCS: Face-Milling Module DRILLSim: Drilling Module 특징 및 장점 경험식 및 이론식을 바탕으로 한 빠른 해석: Off-line해석 요구되는 장비의 force와 power에 대한 빠른 예측 장비의 효율을 극대화 일반적으로 20%이상의 효율 향상을 보임 Tool path에 대한 완전한 가시화 기능을 제공 사용하기 쉬움 CAD file import: STL Turning의 경우 G-code import가능 AdvantEdge Production: TCSim TCSim 프로그램 - 선삭 공정 해석 결과 분석 절삭력 및 절삭동력 계산 Cycle time 분석 Spindle Power vs. Time 발생하는 힘의 최대 크기 Chip 형상 정보 가공 part의 최종 형상 장점 비싼 “shop-floor test” 절감 절삭력 저감과 공구 수명 증대 Cycle time의 감소 장비효율의 극대화 Spindle Power (HP) Cutting & non-cutting time Short Term Overload Limit Machine Power Limit Time (seconds) AdvantEdge Production: TCSim AdvantEdge Production: TCSim AdvantEdgeTM Production: MCS MCS (Machining Center Simulation) Face milling 공정 해석과 분석 GM의 FACEsim의 PC Version 해석수행 및 결과 분석 절삭력, 절삭 토크 및 절삭동력 Cycle time 분석 Cutting & non-cutting time 시간변화에 따른 가공조건 ex. Depth of Cut 칩의 형상 Area, Cutting edge 접촉길이 평균 칩 두께 등 AdvantEdgeTM Production: MCS AdvantEdgeTM Production: DRILLSim DRILLSim (DRILLing Simulation) Drilling 공정 해석과 분석 Drill point 형상 모델링 일반적인 drill 형상 db제공 이송, spindle 속도, drill 형상 영향 평가 절삭력과 작업시간 단축 해석수행 및 결과 분석 절삭력, 절삭 토크 및 요구 절삭동력 절삭시간 절삭공정의 가시화 AdvantEdgeTM Production: DRILLSim Customers Case Study 1. “Sikorsky” Case Study 2. “Chip Breaking & TSIM” End of Slides….. Thank You!!! 대전광역시 유성구 관평동 1335번지 TEL.042-472-7394~5 FAX.042-472-6394 구입문의:담당자 장충식 차장 HP.010-5405-2481 E-mail. csjang@promill.com