ACTIVITY SHEET TEMPLATE (Sustainable Lamp)
8. Stick the bottle to the bottle cap.
9. Finally done!
Name: Althea Zhayne Padilla Date: April 29, 2021 Grade and Section: STEM 12-St.
IV. DOCUMENTATION w/ CAPTIONS
Albert the Great
I. OBJECTIVES
1. Make my own sustainable lamp.
2. Create a sustainable lamp with the use of recyclable materials (eg. Plastic bottle).
3. Learn how to make a sustainable lamp and how to enable this.
II. MATERIALS
LED light
QV Battery
Mountain dew bottle
Bulb
Soldering Iron
Switch
Connector
Scissor, Electric tape, Glue gun
1. Gather all the materials.
2. Stick the cut paper on top of the tape.
3. Make a hole in the center of the paper.
4. Punch a hole in the center of
III. PROCEDURE
the bottle cap using a soldering iron.
1. Gather all the materials needed.
2. Cut a paper that matches the size of the tape and then glue it there. Punch a hole in
the middle of the paper.
3. Punch a hole in the center of the bottle cap by using a soldering iron.
4. Connect the wire to the QV bulb and tighten the screw.
5. Put the bulb inside the bottle cap and stick it to the top of paper.
6. Attach the wire to the switch properly.
5. Connect the wire to the QV bulb.
6. Tighten the screw.
7. Glue the battery and the visible wires at the back of the tape.
7. Put the bulb inside the bottle cap and stick it to the top of paper.
V. GENERALIZATION
A lamp is a device that produce light or sometimes heat. It is a replaceable
device that produces light from electricity. One example of lamp is electric light
bulb. I thought making a sustainable lamp was difficult but this activity made me
realize that it wasn't. You can just do it by yourself. In doing this activity, I
learned a lot. For example is the tools and how to enable it. I had fun doing this
activity. Such an exciting activity to do. This sustainable lamp that I did is a big
help in case of power outage and I can also use it in the future.
Video:
https://drive.google.com/file/d/1ESg2bzz6vdkWitrdudkbm3PmMUG0h4Ct/vie
w?usp=sharing
8. Attach the wire to the switch.
10. Stick the bottle.
9. Glue the battery and wires visible inside.
11. WELL DONE!!