FIRE ALARM CONTROL PANEL (CONVENTIONAL) FMS-P4-4-ABS FMS-P4-8-ABS Type Conventional type Spare Battery 24 VDC Model FMS-P4-4-ABS, FMS-P4-8-ABS ( 380 x 270 x 80 mm) End of Line Resistance 5.1 kΩ Zone 4,8 Max.Amount of Smoke detector 20 pcs/Zone Input Voltage 220 VAC/50Hz Alarm Verifying Time 7 seconds Operation Voltage 24 VDC Exterior Resistance Round-trip under 56Ω Mains Supply 220V AC 50/60 Hz Spare Power (battery) Charging Voltage protection 24V DC Glass Fuse Sounder Output 24v DC(End of Line Resistance 10kΩ) Max.Output Current: 15mA amout Amout of Smoke Detectors Auxiliary Contacts Main Supply Protection Sounder Protection Spare Power(Battery) Protection Zone End of Line Resistance Max.Amout of Connection: 20pcs/Zone Null-Voltage Contact(24V DC,1A max.NO/NC Glass Fuse Glass Fuse Glass Fuse 5.1 kΩ FORMOSA FIRE ALARM CO.,LTD . Circuit Connection Diagram Sounder Circuit 1. 2. 3. 4. Two external sounder output circuit are provided Amount of two sounder outputs is 150 mA Each sounder circuit is protected by fuse 1A Each sounder circuit should be with End of Line Resistance 10KΩ to check if open circuit or short circuit 5. Press EVACUTE button can re-sound the external alarm (bell,buzzer) 6. Press the SILENCE button to mute the external sounder alarm (bell,buzzer) Fault Mode 1. Detector Fault (Detector Base loosened or without end of line resistance 5.1 KΩ) 2. Zone Wiring Fault (Open circuit or short circuit) 3. AC Power Fault 4. Spare Power (battery) Fault (confirm the fuse) 5. Alarm Bell Output Wiring Fault (open circuit or short circuit or without end of line resistance 10KΩ) Zone And Display Each Zone is represented by three LED, one Red and two Orange color FIRE (Red LED): Fire Alarm Signal O/C Fault (Orange LED): Open circuit S/C Fault (Orange LED): Short circuit FORMOSA FIRE ALARM CO.,LTD . Fuse Illustration