Uploaded by aditya.beheray

DEFSTAN 02-107

advertisement
Ministry of Defence
Defence Standard 02-107
Issue 2 Publication Date 24 May 2002
Requirements for Accommodation in HM
Surface Warships and Submarines
Category 2
AMENDMENTS ISSUED SINCE PUBLICATION
AMD NO
DATE OF
ISSUE
TEXT AFFECTED
SIGNATURE &
DATE
Revision Note
This Issue of this Standard has been prepared to incorporate changes to text and presentation.
The technical content has been updated in line with current practice and has been subject to
major revision.
Historical Record
Def Stan 02-107/Issue 1
NES 107 Issue 3
NES 17 Issue 2
NES 17 Issue 1
1 April 2000
December 1993
DEF STAN 02-107/ ISSUE 2
CONTENTS
Description
Page
0
0.1
0.2
0.3
1
2
3
4
5
SECTION 1 GENERAL REQUIREMENTS
Introduction .........................................................................................................7
Background information............................................................................................ 7
Process for use of this standard ................................................................................. 7
Categories of Naval Defence Standard...................................................................... 7
Scope.....................................................................................................................8
Warning................................................................................................................8
Related Documents ..............................................................................................8
Definitions ............................................................................................................9
Abbreviations.......................................................................................................9
6
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
8
8.1
8.2
9
9.1
9.2
9.3
SECTION 2 PERFORMANCE SPECIFICATION
General Requirements.......................................................................................10
Physical Requirements for Accommodation....................................................10
Sleep quality ............................................................................................................ 10
Eating arrangements ................................................................................................ 10
Recreation ................................................................................................................ 11
Miscellaneous spaces............................................................................................... 11
Hygiene and Cleanliness.......................................................................................... 11
Ship design for physical requirements..................................................................... 12
Personal comfort levels............................................................................................ 12
Personal development and training.......................................................................... 13
Group-Related Requirements ...........................................................................13
Group interaction ..................................................................................................... 13
Communication........................................................................................................ 13
Individual-Related Requirements.....................................................................13
Privacy ..................................................................................................................... 13
Personalization......................................................................................................... 14
User control ............................................................................................................. 14
10
10.1
SECTION 3 NATIONAL/INTERNATIONAL REGULATION
Regulatory Standards........................................................................................15
Queen’s Regulations (Royal Navy) ......................................................................... 15
11
11.1
11.2
12
12.1
12.2
12.3
SECTION 4 MILITARY REQUIREMENTS
Safety Assurance................................................................................................16
Safety Case .............................................................................................................. 16
Hazard analysis........................................................................................................ 16
Functional Requirements ..................................................................................16
Flag Officers and Operational Commanders at sea ................................................. 16
Commanding Officers ............................................................................................. 16
Heads of Departments (HoDs)................................................................................. 16
1
DEF STAN 02-107/ ISSUE 2
12.4
12.5
12.6
12.7
12.8
12.9
12.10
12.10.1
13
13.1
14
14.1
15
15.1
15.2
16
16.1
16.2
17
17.1
17.2
17.3
17.4
17.5
18
18.1
18.2
19
19.1
Other Officers and Midshipmen .............................................................................. 16
Warrant Officers ...................................................................................................... 17
Chief Petty Officers ................................................................................................. 17
Petty Officers ........................................................................................................... 17
Junior Ratings .......................................................................................................... 17
Accommodation needs............................................................................................. 17
Hierarchical group separation, ship location and general requirements.................. 19
Ship complement hierarchical group separation ..................................................19
Environmental constraints and ambient condition requirements ..................22
Use of accommodation spaces................................................................................. 22
Drawings and Design .........................................................................................22
Level of drawings .................................................................................................... 22
Materiel ..............................................................................................................23
Material specification .............................................................................................. 23
Furniture and associated fittings .............................................................................. 23
Installation of Equipment and Fittings ............................................................23
Installation specification.......................................................................................... 23
Fire-fighting equipment ........................................................................................... 23
Finish ..................................................................................................................24
Master Décor Scheme.............................................................................................. 24
Surface finish ........................................................................................................... 24
Painting and preservation ........................................................................................ 24
Deck coverings ........................................................................................................ 24
Insulation requirements ........................................................................................... 24
Inspection, Tests and Acceptance .....................................................................24
Design Authority responsibilities ............................................................................ 24
Acceptance............................................................................................................... 24
Integrated Logistic Support ..............................................................................25
Integrated Logistic Support (ILS)............................................................................ 25
20
20.1
20.2
20.2.1
21
21.1
21.1.1
21.1.2
21.1.3
21.2
21.2.1
21.2.2
21.2.3
21.3
21.3.1
21.3.2
SECTION 5 DESIGN REQUIREMENT/GUIDANCE
Safety Assurance................................................................................................26
Safety requirements ................................................................................................. 26
Hazards .................................................................................................................... 26
Hazard prevention................................................................................................26
Requirements for Accommodation Spaces.......................................................27
Requirements for large / medium-sized surface warships....................................... 27
Minimum deck area allowances...........................................................................27
General requirements for furniture and fittings....................................................31
Critical dimensions in accommodation spaces.....................................................32
Requirements for embarked military forces on large/medium-sized warships ....... 33
Standards for embarked forces.............................................................................33
Dining areas for embarked forces ........................................................................34
Recreation spaces for embarked forces................................................................34
Requirements for accommodation on small surface warships ................................ 35
Minimum deck area allowances for small surface warship accommodation ........35
General requirements for small surface warship accommodation ........................36
2
DEF STAN 02-107/ ISSUE 2
21.3.3
21.3.4
21.4
21.4.1
21.4.2
21.4.3
21.4.4
21.4.5
21.5
21.6
21.6.1
21.6.2
21.6.3
21.6.4
21.6.5
22
22.1
22.2
22.3
22.4
22.5
22.6
22.7
22.7.1
22.7.2
22.7.3
23
23.1
23.1.1
23.1.2
23.1.3
23.1.4
23.1.5
23.1.6
23.2
23.2.1
23.2.2
23.2.3
23.3
23.3.1
24
24.1
24.2
24.3
25
25.1
25.2
Furniture and fittings in accommodation spaces ..................................................37
Critical dimensions in accommodation spaces.....................................................38
Requirements for accommodation in submarines.................................................... 38
General requirements for accommodation in submarines ....................................38
Minimum deck area allowances for accommodation in submarines ....................38
Additional requirements for accommodation in submarines ................................40
Furniture and fittings in submarine accommodation............................................41
Critical dimensions in submarine accommodation spaces ...................................42
Requirements for bunks in all vessels ..................................................................... 42
Requirements for miscellaneous spaces .................................................................. 43
Personal training and education facilities ............................................................43
Place of religious observance...............................................................................44
Quiet rooms .........................................................................................................44
Library facilities ..................................................................................................44
Exercise areas ......................................................................................................45
Environmental Constraints and Ambient Condition Requirements..............45
Ship motion.............................................................................................................. 45
Air conditioning and ventilation.............................................................................. 45
Drinking water ......................................................................................................... 46
Vibration .................................................................................................................. 46
Maximum permitted noise levels............................................................................. 46
Lighting.................................................................................................................... 47
Switched power sockets and antennae sockets........................................................ 49
115Vac switched power sockets ..........................................................................49
240Vac switched power sockets ..........................................................................49
Antennae sockets .................................................................................................49
Design Requirements.........................................................................................50
Construction requirements....................................................................................... 50
General requirements...........................................................................................50
Structural divisions between accommodation spaces and other parts of ship.......50
Internal bulkheads between accommodation compartments ................................50
Accommodation compartment decks ...................................................................50
Access and escape arrangements for accommodation compartments...................51
Pipes in accommodation spaces...........................................................................51
Personal-related design requirements ...................................................................... 52
Sleeping cabins....................................................................................................52
Dining areas.........................................................................................................53
Recreation spaces ................................................................................................53
Group-related design requirements.......................................................................... 53
Communication ...................................................................................................53
Materiel ..............................................................................................................54
Timber...................................................................................................................... 54
Composite materials ................................................................................................ 54
Paint ......................................................................................................................... 54
Installation .........................................................................................................55
Maintainability......................................................................................................... 55
Fasteners .................................................................................................................. 55
3
DEF STAN 02-107/ ISSUE 2
25.3
25.4
25.4.1
25.4.2
25.4.3
25.4.4
25.4.5
25.5
26
26.1
26.2
26.3
26.3.1
26.3.2
26.3.3
26.4
26.4.1
Bulkhead mounting.................................................................................................. 55
Electrical fittings...................................................................................................... 55
Lighting fittings ...................................................................................................55
Switched power sockets.......................................................................................55
Earthing arrangements .........................................................................................55
Electrical warnings ..............................................................................................55
Stowage of electrical equipment ..........................................................................55
Pipe work and associated fittings ............................................................................ 56
Finish ..................................................................................................................56
Master Décor Scheme.............................................................................................. 56
Painting and preservation ........................................................................................ 56
Insulation ................................................................................................................. 57
Acoustic insulation ..............................................................................................57
Thermal insulation...............................................................................................57
Acoustic and thermal insulation...........................................................................58
Deck coverings ........................................................................................................ 58
Tread mats ...........................................................................................................59
TABLES
Table 1
Table 2
Table 3
Table 4
Table 5
Accommodation needs of ship’s complement including margins
Minimum deck area allowances on large/medium-sized surface warships
Minimum deck area allowances on small surface warships
Minimum deck area allowances on submarines
Minimum white light requirements for accommodation spaces
21
30
38
40
49
ANNEXES
ANNEX A
ANNEX B
ANNEX C
ANNEX D
Related Documents
Definitions and Abbreviations
Anthropometrics Measurement
Typical inventories of furniture and fittings for primary accommodation
spaces
4
63
65
69
71
DEF STAN 02-107/ ISSUE 2
PREFACE
Standards for Defence
Requirements for Accommodation in HM Surface Warships and Submarines
a.
This standard provides requirements for accommodation in HM Surface Warships and
Submarines.
b.
This standard has been produced on behalf of the Defence Materiel Standardization
Committee (DMSC) by the Defence Procurement Agency, Sea Technology Group (STG).
c.
This standard has been agreed by the authorities concerned with its use and is intended
to be used whenever relevant in all future designs, contracts, orders etc. and whenever
practicable by amendment to those already in existence. If any difficulty arises which
prevents application of the Defence Standard, the Directorate of Standardization (DStan)
shall be informed so that a remedy may be sought.
d.
Any enquiries regarding this standard in relation to an invitation to tender or a
contract in which it is incorporated are to be addressed to the responsible technical or
supervising authority named in the invitation to tender or contract.
e.
Compliance with this Defence Standard shall not in itself relieve any person from any
legal obligations imposed upon them.
f.
This standard has been devised solely for the use of the Ministry of Defence (MOD)
and its contractors in the execution of contracts for the MOD. To the extent permitted by
law, the MOD hereby excludes all liability whatsoever and howsoever arising (including,
but without limitation, liability resulting from negligence) for any loss or damage however
caused when the standard is used for any other purpose.
5
DEF STAN 02-107/ ISSUE 2
6
DEF STAN 02-107/ ISSUE 2
SECTION 1
GENERAL REQUIREMENTS
STANDARD FOR REQUIREMENTS FOR ACCOMMODATION IN HM SURFACE
WARSHIPS AND SUBMARINES
0
INTRODUCTION
0.1
Background information
This Defence Standard has been revised to reflect changes to MOD nomenclature due to the
ongoing MOD reorganization and changes to technical requirements.
0.2
Process for use of this standard
This standard is based on the functional accommodation needs of ships’ complements and is
intended to encourage innovative and flexible design solutions. The main purpose of this
standard is to promote the realization of future naval vessels with accommodation that
reflects the physical and social needs of the personnel that use it.
The standard is to be used as the baseline document by MOD (customer) and contractors
(designers and builders) in the development of Systems Requirement Documentation (SRD)
and User Requirements Documents (URD) under the UK Government Smart Procurement
Initiative (SPI) when specifying accommodation for naval platforms.
0.3
Categories of Naval Defence Standard
This Naval Defence Standard has been classified as a Category 2 standard, using the
following criteria:
a.
b.
c.
Category 1. If not applied may have a critical effect on the safety of the
vessel, and/or its complement, and/or third parties.
Category 2. If not applied may have a significant effect on the safety of the
vessel, and/or its complement, and/or third parties.
Category 3. If not applied may have a minor effect on MOD best practice
and fleet commonality, and/or corporate experience and knowledge, and/or
current support practice.
7
DEF STAN 02-107/ ISSUE 2
SECTION 1
1
GENERAL REQUIREMENTS
SCOPE
This standard specifies requirements for provision, design and fitting out of
Accommodation spaces and Associated Compartments in HM Surface Ships and
Submarines.
For the purposes of this standard, accommodation spaces and associated compartments refer
to dedicated accommodation areas which contain sleeping cabins, dining rooms, recreation
spaces, passageways, lobbies, physical exercise areas, personal training and education areas,
libraries, quiet rooms and religious spaces.
As a function of the accommodation requirements, the requirement for, and location of,
sanitary facilities are also covered in this standard. These sanitary facilities include
washbasins, toilets, bathrooms and shower rooms. The detailed design requirements for
sanitation facilities are covered in Def Stan 02-120.
Other areas associated with ship’s complement accommodation requirements are referred to
but are not covered by this standard as they fall outside the scope of the accommodation
described above. Requirements for these other spaces are covered in other standards and
include Galleys and Associated Spaces (Def Stan 02-121) and Laundries and Associated
Compartments (Def Stan 02-123).
2
WARNING
The Ministry of Defence, like its contractors, is subject to both United Kingdom and
European laws regarding Health and Safety at Work, without exemption. All Defence
Standards either directly or indirectly invoke the use of processes and procedures that could
be injurious to health if adequate precautions are not taken. Defence Standards or their use
in no way absolve users from complying with statutory and legal requirements relating to
Health and Safety at Work.
3
RELATED DOCUMENTS
3.1
The publications shown at Annex A are referred to in the text of this standard.
Publications are grouped and listed in alphanumeric order.
3.2
Reference in this standard to any related document applies to any invitation to
tender or contract and all amendments current at the date of such tender or contract unless a
specific edition is indicated.
3.3
In consideration of Clause 3.2 above, users shall be fully aware of the issue and
amendment status of all related documents, particularly when forming part of an invitation
to tender or contract. Responsibility for the correct application of standards rests with
users.
3.4
DStan can advise where related documents may be obtained from. Requests for
such information can be made to the DStan Helpdesk. The contact details for the help desk
are shown on the outside rear cover of Def Stans.
8
DEF STAN 02-107/ ISSUE 2
SECTION 1
GENERAL REQUIREMENTS
3.5
Prime contractors shall be responsible for supplying their subcontractors with
relevant documentation, including specifications, standards and drawings.
4
DEFINITIONS
4.1
Definitions that apply to the text in this standard are listed at Annex B.1.
5
ABBREVIATIONS
5.1
Abbreviations used in the text of this standard are listed and defined at Annex B.2.
The abbreviations are listed in alphabetical order.
9
DEF STAN 02-107/ ISSUE 2
SECTION 2
PERFORMANCE SPECIFICATION
Section 2 deals with performance and overall aims and goals of accommodation provision.
6
GENERAL REQUIREMENTS
a.
b.
c.
Primary Accommodation (see Annex B.1) shall be provided for the specified
complement of the platform including margins for training staff and other sea
riders, and embarked military forces on specified vessels, in accordance with
the requirements and guidance contained within this Defence Standard.
Secondary Accommodation (see Annex B.1), additional to that provided for
the specified complement of the platform shall also be provided as required in
the SRD/URD. The purpose of secondary accommodation is to provide an
additional accommodation capability for alternative platform roles. These
alternative roles may include the transport and accommodation of additional
embarked military forces and/or the rescue and evacuation of civilians during
humanitarian operations.
The use of modular construction techniques for compartments and furniture is
for example, desirable in order to facilitate re-configuring the accommodation
to meet changing ships’ complement profiles at Clause 6a. above, or to
enable alternative platform roles at Clause 6b. above. Changes to the
specified complement may be caused, for example, by changes to a ship’s
complement gender mix.
7
PHYSICAL REQUIREMENTS FOR ACCOMMODATION
7.1
Sleep quality
a.
b.
7.2
Accommodation shall include provision of sleeping facilities that promote
good sleep quality, comfortable rest, relaxation and privacy for all personnel
comprising the complement and margins specified.
Minimum standards are set for the following requirements for sleeping
compartments:
1.
Provision of adequate space within the overall layout of each sleeping
compartment, see Clause 21.1.3.
2.
Human-anthropometry-derived requirements to be included in the bunk
design, see Clause 21.5c.
3.
Sleeping compartments shall be insulated from unwanted noise, which
in any case shall not exceed the levels identified at Clause 22.5e.
4.
Adequate levels of privacy within the sleeping compartment, see Clause
23.2.
5.
Individual control of lighting, air conditioning and ventilation within
sleeping compartments shall be provided, see Clause 23.2.1.
Eating arrangements
a.
Separate group eating facilities shall normally be provided for each of the
ship’s complement hierarchical groups as defined at Annex B.1.
10
DEF STAN 02-107/ ISSUE 2
SECTION 2
b.
c.
7.3
b.
The layout of recreation spaces shall include the following leisure facilities:
1.
Separate group leisure facilities for each of the ship’s complement
hierarchical groups.
2.
Recreation areas designed to provide facilities that include an on-screen
entertainment area with uninterrupted visibility for a large-screen TV.
See Clause 23.2.3a.
3.
Areas where small group interaction activities can take place (typically
discussion groups, board games etc.). See Clause 23.2.3a.
4.
Areas for individual activities (typically reading, computer use, etc.).
See Clause 23.2.3a.
5.
Areas dedicated for the management, storage and distribution of
alcoholic and non-alcoholic beverages. See Clause 23.2.3e.
6.
Tables, seating and entertainment equipment with supporting services.
Guidance on the provision of furniture is provided at Annex D.
Leisure facilities in sleeping accommodation shall include:
1.
Facilities for the use of personal audio equipment for each occupant.
2.
The design of sleeping berths shall not preclude reading in the sittingup position.
Miscellaneous spaces
a.
7.5
Provision of adequate space shall be made within the overall layout of each
dining room to facilitate the required throughput of personnel, including the
provision of self-service or waiter-service facilities. See Clause 21.1.3j.
In addition to facilities for formal meal times, snack features and facilities for
the preparation of snack food and hot/cold beverages shall be included as a
service available to all members of the ship’s complement.
See
Clause 23.2.2d.
Recreation
a.
7.4
PERFORMANCE SPECIFICATION
Miscellaneous spaces shall be provided to include areas for: personal training
and education; religious worship; dedicated quiet rooms; library areas and
exercise areas. See Clause 21.6.
Hygiene and Cleanliness
a.
Accommodation compartments shall be designed to promote personal
hygiene and ship cleanliness in accordance with good ship husbandry
practice. The design shall include the following features:
1.
Accommodation spaces, fixtures and fittings shall be designed for ease
of maintenance and upkeep in a safe, clean and habitable condition.
2.
Sanitation facilities (toilets, shower rooms and bathrooms) shall be
located near to and/or integrated with sleeping cabins, other
accommodation areas and watch-keeping areas.
3.
Sanitation facilities shall be designed to inhibit the occurrence of
blockages, afford easy access to pipes and conduits, and provide ease of
maintenance by both users and dedicated cleaning staff.
11
DEF STAN 02-107/ ISSUE 2
SECTION 2
4.
5.
6.
7.
8.
7.6
Facilities for the disposal of sanitary waste shall be provided in toilets
and bathrooms.
A sealable laundry bag facility shall be provided for each occupant of a
sleeping cabin for the hygienic stowage of soiled linen and clothing.
Shared heating and ventilation facilities shall be provided in each
accommodation flat for the drying of foul-weather clothing.
Shared stowage facilities shall be provided for the stowage of dirty
boots and overalls and soiled outer clothing in each accommodation
flat, external to the sleeping cabins.
The design of accommodation spaces shall aim to eliminate access,
breeding and habitation areas for vermin.
Ship design for physical requirements
a.
b.
7.7
PERFORMANCE SPECIFICATION
The whole-ship design shall address the impact of environmental factors on
the well-being of the ship’s complement. See Clause 22.
The following features are to be considered within the overall ship design:
1.
Sleeping berths shall normally be oriented with their length along the
fore and aft ship’s axis.
2.
The quality of air in accommodation spaces shall be in accordance with
Clause 22.2.
3.
Fresh drinking water shall be available to all members of the ship’s
complement, see Clause 22.3.
4.
Furniture, fixtures and fittings in sleeping compartments shall be
installed such that transmitted vibrations are minimised, see
Clause 22.4.
5.
Excessive noise levels shall be prevented in sleeping compartments and
other accommodation spaces, see Clause 22.5.
6.
Lighting levels in accommodation spaces shall comply with the
requirements at Clause 22.6.
7.
Safety measures against rough weather shall be incorporated in the
overall design of accommodation spaces and the associated fixed and
portable fittings, see Clause 20.
Personal comfort levels
a.
The design of accommodation spaces shall include the following comfortenhancing features:
1.
Carpeted sleeping, recreation and dining areas, see Clause 26.4.
2.
Lining of bulk-heads and deck-heads in sleeping cabins and recreation
spaces shall be incorporated, see Clause 24.2.
3.
Provision of adequate personal stowage space in sleeping cabins, see
Clause 21.1.2.e for large and medium-sized surface warships,
Clause 21.3.2.n for small surface warships and Clause 21.4.4.h for
submarines.
4.
Washbasins in cabins, see Section 21, Table 2 for large and mediumsized surface warships, Table 3 for small surface warships and Table 4
for submarines.
12
DEF STAN 02-107/ ISSUE 2
SECTION 2
b.
7.8
PERFORMANCE SPECIFICATION
Accommodation, in particular seating and bunks for sleeping, shall be
capable of accommodating at least the 5th percentile female to 95th percentile
male UK civilian stature as per the latest available data, plus an additional
5cm allowance to take account of the estimated anthropometric trend for a
50-year period to cover the estimated period from ship concept through to
disposal, see Annex C. For further guidance on human-anthropometryrelated issues, the Institute of Naval Medicine (INM) should be consulted.
Personal development and training
a.
The design of sleeping cabins shall include facilities for occupants to
undertake office-type work-related activities and personal development
training.
8
GROUP-RELATED REQUIREMENTS
8.1
Group interaction
a.
b.
8.2
Spaces shall be provided for personal tuition, training and education. In
medium and small surface warships and submarines these spaces may be
multi-purpose spaces and combined within a single space.
Recreation spaces for respective hierarchical groups shall be provided.
Communication
a.
b.
c.
d.
A dedicated computer access connection point shall be provided for each
occupant in sleeping accommodation providing on-line information
including, but not limited to, ship administration data, on-board training
material, personal development and external news, etc. See Clause 23.2.1a.8.
A ship internal communication equipment facility shall be provided for each
occupant in each sleeping cabin.
Facilities shall be provided for all members of the ship’s complement to gain
access to ship external communication equipment via a command-controlled
distribution facility.
Due regard shall be given to the design requirements for the installation of
TEMPEST designated equipment in ships and submarines (see Def Stan 0850).
9
INDIVIDUAL-RELATED REQUIREMENTS
9.1
Privacy
a.
b.
The layout and co-location of accommodation spaces shall provide for
privacy and personal territorial areas to allow individuals to regulate
interaction with other people.
Privacy shall be achieved by effective use of features which include:
1.
Accommodation in single-berth cabins.
2.
The arrangement of accommodation in multi-berth cabins.
13
DEF STAN 02-107/ ISSUE 2
SECTION 2
3.
4.
5.
6.
7.
9.2
Dining and recreation areas shall be separate from sleeping areas.
Sleeping areas shall have adjacent access to showers and toilets or ensuite facilities.
Provision of single toilets to accommodate mixed-gender crews.
Curtains or alternative arrangements at bunks in multi-berth cabins are
to cover the whole opening to ensure privacy. In multi-berth cabins, the
head and foot end of bunks are to be screened to ensure privacy.
Private rest spaces to be separate from public accommodation areas.
Personalization
a.
9.3
PERFORMANCE SPECIFICATION
The presentation and décor of accommodation spaces shall comply with the
chosen Master Décor Scheme (MDS), see Clause 26.1. Where space permits,
it is desirable that the design and fitting of cabin linings allow potential for
individuals to personalize their own spaces using pictures and posters etc.
User control
a.
b.
c.
The design of environmental systems in accommodation spaces shall
incorporate a control system that allows for adjustment of the ambient
environment (e.g. temperature, airflow) at ship, group, sub-group or
individual levels.
The design of SRE systems in accommodation spaces shall incorporate a user
volume control.
There shall not be any facility for individuals to turn down or switch off the
Main Broadcast system.
14
SECTION 3
DEF STAN 02-107/ ISSUE 2
NATIONAL/INTERNATIONAL REGULATION
10
REGULATORY STANDARDS
10.1
Queen’s Regulations (Royal Navy)
a.
b.
Regulations governing Messing and Accommodation in Her Majesty’s Ships
are provided in Chapter 81 of BR 2 Queen’s Regulations (Royal Navy)
(QR(RN)). These regulations have been used in the formulation of
Def Stan 02-107.
The regulations in QR(RN) are to take precedence over the statements in this
standard.
15
DEF STAN 02-107/ ISSUE 2
SECTION 4
MILITARY REQUIREMENTS
Section 4 specifies requirements that need to be applied in order to achieve the military
aims and goals of accommodation provision.
11
SAFETY ASSURANCE
11.1
Safety Case
a.
11.2
A safety case report for ship’s accommodation spaces including the furniture,
fixtures and fittings, shall be prepared as part of the overall Ship Safety Case.
Hazard analysis
a.
A hazard analysis of the platform accommodation including the furniture,
fixtures and fittings shall be undertaken taking cognisance of the
requirements identified in JSP 430, JSP 375 and current Safety Legislation.
12
FUNCTIONAL REQUIREMENTS
12.1
Flag Officers and Operational Commanders at sea
a.
12.2
Commanding Officers
a.
12.3
Accommodation shall be provided for Commanding Officers on all platforms,
that is appropriate for the following functional roles: ship command; ship
management; administration of subordinate ship’s staff; hospitality role.
Heads of Departments (HoDs)
a.
12.4
Accommodation shall be provided for Flag Officers/Operational
Commanders at sea on specified platforms, that is appropriate for the
following functional roles:
Task Force command; Task Force/Fleet
management; administration of Flag Officer staff; hospitality role at UK
government ministerial level.
Accommodation shall be provided for HoDs on all platforms, that is
appropriate for the following functional roles: departmental command;
departmental management; staff administration including one-to-one
interview capability; entertaining official guests.
Other Officers and Midshipmen
a.
Accommodation shall be provided for Officers on all platforms, that is
appropriate for the following functional roles: section/divisional command;
section/divisional management and administration including one-to-one
interview capability; watch-keeping duties; entertaining official guests.
16
DEF STAN 02-107/ ISSUE 2
SECTION 4
12.5
Warrant Officers
a.
12.6
Accommodation shall be provided for Warrant Officers on all platforms, that
is appropriate for the following functional roles: head of section/divisional
type duties; section/divisional management and administration; interviewing
subordinates.
Chief Petty Officers
a.
12.7
Accommodation shall be provided for Chief Petty Officers on all platforms,
that is appropriate for the following functional roles: section management
and administration (Senior CPOs only); management of subordinates; watchkeeping duties; operational duties; maintenance duties.
Petty Officers
a.
12.8
Accommodation shall be provided for Petty Officers on all platforms, that is
appropriate for the following functional roles: supervision of subordinates;
watch-keeping; operational duties; maintenance duties.
Junior Ratings
a.
12.9
MILITARY REQUIREMENTS
Accommodation shall be provided for Junior Ratings on all platforms, that is
appropriate for the following functional roles: watch-keeping duties;
operational duties; maintenance duties.
Accommodation needs
In order to meet the functional requirements at Clauses 12.1 to 12.8, and the impact that
these have on the accommodation needs of the ship’s complement, including margins, the
following requirements are identified and tabulated at Table 1, where:
*
OC
CO
HoD
O/M
SR
JR
=
=
=
=
=
=
=
Applicability
Operational Task Force Commanders
Commanding Officers
Heads of Departments
Other Officers and Midshipmen
Warrant Officers, Chief Petty Officers and Petty Officers
Leading Seamen, Able Bodied Seamen and Ordinary Seamen
17
DEF STAN 02-107/ ISSUE 2
SECTION 4
MILITARY REQUIREMENTS
Table 1 Accommodation needs of ship’s complement including margins
Accommodation needs
Privacy
Access to ship’s internal communication links
Access to ship’s external communication links
Desk & IT terminals connected to ship IT system
Shared fitness exercise area and facilities
Independence from subordinates
Document security container
Command-type communications, sleeping cabin
with en-suite bathroom and toilet, day room
(recreation area), dining room (see Note 1),
conference facilities (see Note 1), manned pantry
facility (see Note 2), private drinks cabinet
Security isolation, independence from ship’s
command
Shared en-suite bathroom and toilet (see Note 3)
Shared manned pantry facilities and shared
conference facilities
Personal sleeping cabin with integral wash basin
OC
CO
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Heirarchical Groups
SRs JRs
Officers
HoD O/M
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Shared sleeping cabin with integral wash basin
*
*
Shared sleeping cabin
Shared unmanned pantry facilities
Shared bathroom and toilet facilities
*
*
*
*
*
*
*
*
*
*
*
Shared recreation space, bar facilities, dining
room and facilities.
*
*
*
*
Access to shared laundry/drying room services,
shared foul-weather clothing facility, shared dirty
boots and overalls stowage facility
NOTE 1 Private dining rooms shall be dual purpose with the secondary role use as a
meetings/conference area with conferencing facilities provided.
NOTE 2 The pantry is to be provided and equipped for call order cooking, hot and cold
food holding and re-heating. In CVS close access is required to the Operational Commander
Task Force accommodation and the Commanding Officer accommodation.
NOTE 3 HoDs are to be provided with en-suite bathroom and toilet facilities on the basis
of no more than two HoDs sharing.
18
DEF STAN 02-107/ ISSUE 2
SECTION 4
12.10
MILITARY REQUIREMENTS
Hierarchical group separation, ship location and general requirements
12.10.1 Ship complement hierarchical group separation
a.
b.
c.
d.
e.
The various types of apartments, cabin suites, single and multi-berth cabins,
dining and recreation spaces are allocated with regard to the functions of the
occupants. The following sub-clauses specify the requirements for ship
complement hierarchical (see Annex B.1) group separation, ship location and
general requirements criteria that shall be implemented by the
designer/shipbuilder:
Primary accommodation spaces are not to be sited where the camber and/or
sheer of the deck will prejudice the fitting of standard items of fixed and
portable furniture.
Commanding Officer accommodation shall:
1.
Be located on the starboard side of the ship with good access to the
ship’s bridge and operations room.
2.
Be provided with a scuttle/portlight in the dining area, and the sleeping
cabin where practicable, with a clear view to starboard.
The location of accommodation spaces shall be as follows:
1.
Complemented Officer accommodation comprising sleeping cabins,
dining and recreation areas, bathrooms and toilets, shall be located as
complete units in a dedicated area of the platform separate to Senior
Rating and Junior Rating accommodation.
2.
On all vessels an Officer’s sleeping cabin dedicated for use by the
ship’s Navigating Officer shall be located adjacent to the bridge.
3.
Officer dining facilities shall be located near the main galley with
arrangements for food lifts to the dining room pantry if on another deck
level.
4.
Senior Rating accommodation comprising sleeping cabins, bathrooms
and toilets shall be located in dedicated area(s) of the platform separate
to Junior Rating accommodation. This accommodation may be
subdivided into separate geographical areas to meet design constraints
and provide dispersion of personnel.
5.
Senior Rating dining rooms shall be located adjacent to their associated
galley.
6.
Senior Rating recreation spaces shall be located adjacent to, or in close
proximity to the Senior Rating dining room.
7.
Junior Rating accommodation comprising sleeping cabins, bathrooms
and toilets shall be located in dedicated areas of the platform. This
accommodation may be subdivided into separate geographical areas to
meet design constraints and provide crew dispersion.
8.
Junior Rating dining rooms shall be located adjacent to the main galley.
9.
Junior Rating recreation spaces shall be located in close proximity to
the Junior Rating dining room.
Requirements for sleeping cabins are:
1.
Sleeping cabins shall be of modular design to enable ready conversion
to suit a range of ship complement profiles. This may include a variety
of gender mixes and facilities for long-term sea-riders.
19
DEF STAN 02-107/ ISSUE 2
SECTION 4
2.
f.
g.
MILITARY REQUIREMENTS
Sleeping cabins for Officers and Senior Ratings shall include as a
minimum one washbasin (where not full en-suite),
3.
All sleeping cabins shall include one telephone, one desk, an IT
terminal connection point for each occupant of the cabin, one switched
power socket plus an additional switched power socket for each
occupant, fitted furniture which makes best use of available space; and
shall include a full length mirror as identified at Annex D.
4.
The numbers of single sleeping cabins and the numbers to be
accommodated in multiple sleeping cabins shall be determined from the
complement structure.
5.
Any requirement to provide additional sleeping accommodation shall be
specified in the SRD/URD.
The required seating capabilities of dining areas and recreation spaces based
on functional needs and operational duties for the ship’s complement and
margins are identified below for all surface warships. Additional seating may
be required to accommodate embarked forces on large and medium-sized
warships; Clause 21.2.2, and Clause 21.2.3 refers. The requirements for
submarines are included at Clause 21.4 3.
1.
Seating for all complemented Officers at dining tables in one sitting,
and seating in recreation spaces (wardroom and anteroom to count as a
single space) for 90% complemented officers.
2.
Seating for 80% of complemented Senior Ratings at dining tables,
seating for 80% of complemented Senior Ratings in recreation spaces.
3.
Seating for 50% of complemented Junior Ratings at dining tables,
seating for 70% of complemented Junior Ratings in recreation spaces.
Requirements for bathroom and toilet facilities are:
1.
Bathrooms and toilets shall be located in close proximity to sleeping
cabins and located in single or multiple units, to provide both gender
flexibility and optimise close proximity to each sleeping cabin.
2.
A minimum of two toilet facilities with hand basins shall be provided
adjacent to each recreation space and dining room. This facility shall
be increased to meet the ratio of one toilet facility per 50 persons as
necessary.
3.
Toilets that can be used by either gender, and any rank are to be
provided in close proximity to work areas that include a watch-keeper
requirement.
4.
Gender-neutral shower rooms shall be provided with shower area with
drain and privacy screen, changing area with fitted seating, vanity
mirrors, clothes hooks, sanitary waste disposal facility.
5.
Gender-neutral washrooms containing individual fully enclosed
washing cubicles with access door shall be provided for Junior Ratings.
Each cubicle shall be fitted with wash basin, illuminated vanity mirror,
towel rail, shelf, soap tray and a coat hook.
6.
Gender-neutral toilets shall be provided as standard units with one, two
or four WCs and privacy screens/doors. Each unit shall include toilet
roll holder, washbasin (four unit WCs to have two washbasins), vanity
mirror, cap/coat hooks, sanitary waste disposal facility.
20
DEF STAN 02-107/ ISSUE 2
SECTION 4
MILITARY REQUIREMENTS
7.
h.
i.
j.
k.
l.
m.
Cleaning lockers shall be provided for bathrooms, toilets and shower
rooms on each accommodation flat. Cleaning lockers are required for
toilets located adjacent to recreation/dining areas and at watch-keeper
positions.
8.
In submarines the number of WCs provided are to be in accordance
with Table 4.
Additional requirements for primary accommodation:
1.
Officers, Warrant Officers, Chief Petty Officers and Petty Officers who
are carried temporarily for transit, training, trials and inspection roles,
are additional to the ship’s complement. This additional primary
accommodation requirement is identified as the complement margin.
2.
Embarked military forces shall be provided with primary
accommodation on specified vessels.
Requirements for secondary accommodation are:
1.
The requirement to include an accommodation capability to carry
additional embarked military forces on a temporary basis shall be
identified in the SRD.
2.
Requirements to have a capability to provide additional accommodation
for humanitarian operations shall be identified in the SRD.
3.
To meet the requirements identified at 1. and 2. above ship’s
accommodation shall be designed to include a capability to transport
additional embarked military forces, or to accommodate civilians being
rescued/evacuated during humanitarian operations. This may include
provision of permanent accommodation where available; modification
of ships complement accommodation; and provision of emergency
accommodation in modular kit form for use in areas designed for other
purposes i.e. hangars, flight decks, dining and recreation areas.
The various types of apartments, cabin suites, single and multi-berth cabins,
dining and recreation spaces are allocated with regard to the rank of the
occupants and will vary across the range of ship types defined within this
standard. Ship’s complement accommodation shall be provided based on the
allowances for each platform type specified at Clause 21.1 for large and
medium-sized surface warships, Clause 21.3 for small surface warships, and
Clause 21.4 for submarines.
All accommodation spaces shall be provided with facilities to secure/stow all
moveable objects for sea.
All accommodation spaces shall be provided with facilities to secure the
space for action stations. This will include the making safe of loose objects
to prevent damage under extreme ship angles, the safe stowage of soft
materials (paper, upholstery items etc.) to prevent clogging of damage control
pumps, and the utilisation of appropriate materials to prevent damage caused
by shattering under shock conditions.
Laundries and drying rooms are not to be incorporated within the boundaries
of accommodation spaces covered by this standard.
21
DEF STAN 02-107/ ISSUE 2
SECTION 4
MILITARY REQUIREMENTS
13
ENVIRONMENTAL CONSTRAINTS AND AMBIENT CONDITION
REQUIREMENTS
13.1
Use of accommodation spaces
a.
b.
All accommodation spaces shall be capable of efficient and effective use
under the conditions specified in Def Stan 00-35 (Parts 1-6) and the SRD.
Smoking in accommodation spaces must comply with RN Smoking Policy.
14
DRAWINGS AND DESIGN
14.1
Level of drawings
a.
b.
c.
Scale layout drawings shall be prepared in electronic format for all
accommodation compartments, lobbies and passageways covered by this
Defence Standard. The electronic format shall be suitable for viewing
selected drawings on the ship’s IT system. The drawings shall include
layouts with the full allowance of furniture for each compartment, and the
positions of the following facilities/features:
1.
Access arrangements.
2.
Escape routes.
3.
Fire fighting equipment.
4.
All permanent fittings.
5.
Securing arrangements for portable furniture and equipment.
6.
Compartment linings.
7.
Lighting.
8.
Electrical power supplies.
9.
Communications including telephones, computer LAN connections.
10. Ventilation trunking.
11. Hot and cold FW pipe work.
12. Soil pipes.
13. Drainage.
14. Maintenance access to all accommodation fittings, equipment and the
structure behind furniture and cabins.
15. Where applicable operator/maintainer access to non-accommodation
related ships systems/equipment.
16. The layout drawings shall show the detailed arrangements for the reconfiguration of accommodation spaces to facilitate the accommodation
of embarked forces during platform alternative roles.
Reference drawings shall be prepared to show details of the control and
switching arrangements for permanent fittings.
Drawings shall be available in electronic form for use with simulation-based
design and virtual prototyping tools.
22
DEF STAN 02-107/ ISSUE 2
SECTION 4
MILITARY REQUIREMENTS
15
MATERIEL
15.1
Material specification
a.
b.
c.
d.
e.
15.2
All material used in the construction of accommodation areas and spaces
including furniture and fittings, shall conform to the relevant specifications
invoked in this standard.
The Design Authority shall be responsible for the specification and approval
of materials used in the construction of accommodation spaces, furniture,
fixtures and fittings.
The requirements identified in Def Stan 07-247 for fire and toxicity
characteristics of material shall be invoked for surface ships.
The requirements of BR1326A for fire and toxicity characteristics of material
shall be invoked for submarines.
An application for the proposal to use alternative or future developed
materials or equipment shall be submitted to the Design Authority for
approval prior to proceeding with equipment design.
Furniture and associated fittings
a.
b.
c.
Furniture and associated fittings are to be provided from commercial sources.
As the Design Authority the Prime Contractor shall be responsible for the
approval and acceptance of furniture and associated fittings manufactured to
approved drawings, specifications and standards.
Furniture and equipment shall be selected or designed and constructed to
provide commonality with other compartments in the ship to minimize
logistic support requirements.
16
INSTALLATION OF EQUIPMENT AND FITTINGS
16.1
Installation specification
a.
b.
c.
16.2
An installation specification shall be provided as part of the ship’s
documentation.
The installation specification shall include detailed instructions for reconfiguring multi-berth sleeping cabins to accommodate ship’s complement
changes in gender mix.
The installation specification shall also include detailed instructions for reconfiguring sleeping cabins, furnishings, and dining/recreation spaces to
accommodate embarked military forces or for use during humanitarian
operations.
Fire-fighting equipment
a.
b.
Fire-fighting equipment shall be provided and installed in passageways and
compartments to meet fire and safety certification requirements.
Accommodation furniture, fittings and equipment shall be located such that
fire fighting equipment is clearly accessible at all times.
23
DEF STAN 02-107/ ISSUE 2
SECTION 4
17
FINISH
17.1
Master Décor Scheme
a.
17.2
Preservation of structure and painting of the compartments, pipe work, etc.
shall be carried out in accordance with the requirements of the ship’s painting
schedule and manufacturer’s data sheets. See Clause 26.2.
Deck coverings
a.
17.5
Finish of construction is to be smooth with no sharp edges or corners.
Finish of furniture, fixtures, fittings and equipment shall be smooth with no
sharp edges or corners.
Painting and preservation
a.
17.4
The MDS for accommodation spaces shall be developed and agreed for each
new class of surface ship and submarine. See Clause 26.1.
Surface finish
a.
b.
17.3
All decks in accommodation spaces shall be covered with material(s)
approved by the Design Authority. See Clause 26.4.
Insulation requirements
a.
Compartment boundaries, pipe work and ventilation trunking shall be
insulated to minimise condensation, heat transfer and to maintain a habitable
environment in accommodation spaces. See Clause 26.3.
18
INSPECTION, TESTS AND ACCEPTANCE
18.1
Design Authority responsibilities
a.
18.2
MILITARY REQUIREMENTS
The Design Authority shall be responsible for identifying the requirements
for inspection, testing and presentation for acceptance of accommodation
spaces, furniture, equipment and associated fittings.
Acceptance
a.
The Acceptance Authority shall be responsible for acceptance of the
accommodation spaces, furniture, equipment and associated fittings.
Acceptance criteria to be applied shall include as a minimum:
1.
Easy-to-clean-and-maintain surfaces, coatings and coverings.
2.
Easy-to-repair surfaces, coatings and coverings.
3.
Finish of construction and furniture to be smooth with no sharp edges
or corners.
4.
Robustness of furniture, fittings, equipment and deck coverings for use
on ships and boats.
24
DEF STAN 02-107/ ISSUE 2
SECTION 4
MILITARY REQUIREMENTS
5.
6.
7.
8.
9.
10.
11.
12.
13.
All compartments, equipment, furniture and fittings are safe to use in
normal conditions and can be easily ‘securely stowed for sea and
action’ conditions.
The capacity of accommodation spaces is sufficient to accommodate
the ship’s complement and margins specified.
Personal kit stowage space is provided that meets the requirements of
this standard.
Accommodation spaces are planned and equipped to ensure
compartments are optimised for functionality and the occupants’
comfort, movement and to facilitate tidiness.
Levels of comfort are provided that are commensurate with the
functions and rank of the occupants.
Sleeping cabins, dining areas and recreation spaces are provided,
installed and equipped that meets the requirements of this standard.
The provision of bathrooms, toilets and sanitation equipment meets the
requirements set out in this standard.
Fitness areas are provided and equipped that meets the requirements of
this standard.
Materials used conform to the fire and toxicity standards mandated.
19
INTEGRATED LOGISTIC SUPPORT
19.1
Integrated Logistic Support (ILS)
a.
ILS requirements for accommodation spaces, furniture, equipment, fixtures
and fittings are to be consistent with the overall ship ILS requirements.
25
DEF STAN 02-107/ ISSUE 2
SECTION 5
DESIGN REQUIREMENTS / GUIDANCE
Section 5 provides specific design requirements and guidance that need to be applied in
order to achieve the aims and goals of accommodation provision.
20
SAFETY ASSURANCE
20.1
Safety requirements
a.
b.
20.2
The Design Authority shall be responsible for the establishment and
maintenance of safety-related aspects of accommodation spaces and produce
safety case reports as part of the overall ship safety case documentation.
All identified hazards related to accommodation spaces, fixed and portable
furniture and fittings, including other ships’ equipment and fittings fitted in
accommodation spaces shall be incorporated in the overall ship Safety
Management System.
Hazards
20.2.1 Hazard prevention
a.
In order to minimize risk, a hazard analysis shall be conducted on
accommodation spaces. The following items are provided for inclusion in the
hazard analysis. These items do not constitute a full and exhaustive list of
potential hazards:
1.
The arrangements for the storage, distribution and use of oil or gaseous
fuel or any other explosive, flammable or poisonous substance used in
other parts of the ship shall be such as to minimize the risk of fire or
explosion within accommodation areas.
2.
No batteries of a type that emits gases, shall be stored in
accommodation compartments, and there shall be no opening from an
accommodation space into a space where such batteries are stored.
Precautions shall be taken to ensure that fumes from batteries cannot
enter accommodation spaces.
3.
No manhole or other opening to a fuel tank shall be situated in the
ship’s accommodation spaces.
4.
Tank sounding tubes, filling connections and pipe system drain-down
points shall not be sited within accommodation areas.
5.
No manhole or other opening to an explosives magazine shall be
situated in the ship’s accommodation spaces.
6.
Electrical fittings including switches, power sockets and cabling shall
be installed in accordance with the requirements specified in this
standard and include the fitting of warning labels where appropriate.
7.
All structures, furniture and fittings, and the means of access to and
egress from the ship’s complement accommodation, shall be so
situated, constructed and arranged as to minimize any risk of injury to
personnel.
8.
Valves, flanges and associated couplings on liquid system pipe-work
are not to be positioned above bunks or tables
26
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
SECTION 5
9.
Precautions shall be taken to avoid foul air polluting the ventilation
system for accommodation areas. Intake vents which supply air to the
accommodation ventilation system shall be situated away from diesel or
sewage treatment plant emissions.
21
REQUIREMENTS FOR ACCOMMODATION SPACES
21.1
Requirements for large / medium-sized surface warships
21.1.1 Minimum deck area allowances
a.
Table 2
Minimum deck area allowances for accommodation in large and mediumsized surface warships as defined at Annex B.1 are given in Table 2.
Minimum deck area allowances on large / medium-sized surface warships
Nett Area (m2)
see Notes 1 to 8
Operational Task
Apartment:
(1)+(2) 44.0
Force Commander
(1) = Day cabin
(2) = Dining room
(3) 7.5
(CTG) (large surface
(3) = Sleeping cabin (4) = En-suite bathroom
(4) 5.0
warships only)
(5) = Operational Commander sleeping cabin
(5) 7.5
Cabin suite:
(1) = Day/dining cabin (large surface warship)
(1) 22.5
Commanding
(2) = Day/dining cabin (medium warship)
(2) 16.0
Officers
(3) = Sleeping room.
(3) 7.5
(4) = En-suite bathroom.
(4) 5.0
(5) = CO sea cabin (large surface warship)
(5) 7.5
Commander Air
Sea cabin.
7.5
Commander Task
Cabin suite:
Unit (CTU)
(1) = Day/dining cabin
(1) 16.0
(medium-sized
(2) = Sleeping room
(2) 7.5
surface warships)
(3) = Access to CO’s en-suite bathroom.
Single cabin suite with day/sleep areas and
access to shared bathroom.
(1) = large-sized surface warship
HoDs
(1) 12.5
(2) = medium-sized surface warship.
(2) 10.0
(3) = Shared en-suite bathroom per two cabins
(3) 5.0
Occupant(s)
Compartment
27
DEF STAN 02-107/ ISSUE 2
SECTION 5
Table 2
DESIGN REQUIREMENTS / GUIDANCE
(Continued)
Occupant(s)
All other Officers
Compartment
Single-berth cabin with integral washbasin.
(1) = large surface warship,
(2) = medium-sized surface warship.
Non-complemented
temp role Officers
Warrant Officer
Senior CPO
Other Senior Rating,
including temp role
Junior Ratings, Junior
NCO and other ranks
Twin-berth cabin with one integral washbasin.
Single-berth cabin with integral washbasin.
Single-berth cabin with integral washbasin.
Area (m2)
see Notes 1 to 8
(1) 8.5
(2) 8.0
5.0 per person
7.5
6.5
Twin-berth cabin with one integral washbasin.
5.0 per person
Four-berth cabins.
2.25 per person
Officer
Dining room (Wardroom) large surface
warship.
1.35 per person
Officer
Recreation space (Anteroom) large surface
warship.
1.15 per person
Officer
Combined dining and recreation (Wardroom)
medium surface warship.
2.5 per person
Senior Rating
Dining room.
0.8 per person
Senior Rating
WO, CPO and PO recreation spaces.
1.1 per person
Junior Rating
Dining rooms.
0.6 per person
Junior Rating
Recreation spaces.
0.8 per person
Embarked forces
Junior NCO and
other Ranks
Recreation space based on total number of
embarked forces carried including Officers
and Senior NCOs.
0.4 per person
Officer shower
cubicles
One shower cubicle for every five Officers,
units to be located so that cabins are no more
than five cabins from a shower.
2.5 per cubicle
Officer toilets
One WC with washbasin for every five
Officers, units to be located so that cabins are
no more than five cabins from a WC.
2.5 per toilet
28
SECTION 5
Table 2
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
(Continued)
Occupant(s)
Compartment
Area (m2)
see Notes 1 to 8
Senior Rating shower
cubicles
One shower cubicle for every seven Senior
Ratings. Units to be located so that cabins are
no more than eight cabins from a shower.
2.5 per cubicle
Senior Rating toilets
One WC with washbasin for every seven
Senior Ratings, to be located so that cabins are
no more than eight cabins from a WC.
2.5 per toilet
Junior Rating shower
cubicles
One shower cubicle for every ten Junior
Ratings, units to be located with cabins so that
no cabin is more than six cabins distant from a
shower cubicle.
2.5 per cubicle
Junior Rating toilets
One WC with washbasin for every ten Junior
Ratings, to be located with cabins so that no
cabin is more than six cabins from a WC.
Junior Ratings, Junior One gender-neutral washing cubicle fitted
with: washbasin; shelf; towel rail; mirror and
NCOs and other
coat hook to be provided per three persons in
Ranks
multi-person washrooms.
Ship’s Complement
and Embarked Forces
Exercise area equipped with exercise
equipment to cover a range of exercise
disciplines.
29
2.5 per toilet
1.25 per cubicle
3 per discipline
DEF STAN 02-107/ ISSUE 2
SECTION 5
Table 2
DESIGN REQUIREMENTS / GUIDANCE
(Continued)
NOTE 1
In large surface warships the requirement for, and location of, an Operational
Commander sea cabin (CTG staff officer or admiral), Commander Air sea cabin for use
during air operations, and Commanding Officer sea cabin is to be identified in the
SRD/URD.
NOTE 2
The CTU cabin suite on medium-sized warships is to be located in close
proximity to the Commanding Officer accommodation such that the en-suite bathroom can
be shared when both suites are occupied.
NOTE 3
The area standards quoted in this Table are by themselves of little value
unless associated with an appropriate shape fit for the functions of the respective
compartments. To arrive at the most convenient shapes it is necessary to examine the
dimensions and scales of allowances of furniture and fittings for any given space in order
that optimum overall dimensions are achieved. It is appreciated that compartment shapes
are often dictated by other shipbuilding considerations but it is essential, at a very early
stage of any new design, to ensure that all compartments are of a suitable shape to permit a
practical layout. The maximum ratio of length to breadth shall be 2:1 for accommodation
compartments.
NOTE 4
In determining the floor area of a compartment for the purpose of this
standard, spaces occupied by bunks, lockers, seats or chests of drawers and other furniture
shall be included in the measurement of the floor area. However, spaces that by reason of
their small size or irregular shape cannot accommodate furniture and do not contribute to
the area available for free movement shall not be so included.
NOTE 5
When calculating total accommodation areas, designers and shipbuilders will
need to include an allowance for lobbies, corridors, passageways and access openings.
NOTE 6
The allowance areas given in this Table are nett areas and indicate the
required space per individual/function to be factored-in to the accommodation. Designers
and shipbuilders will need to apply a grossing calculation to these figures to allow for
unusable space at the boundaries created by structural elements or other factors caused by
equipment not related to accommodation. An indicative grossing allowance of 7.5% is
provided as guidance for calculating gross allowance areas.
NOTE 7
All washing and shower cubicles, and WC units are to be gender-neutral.
NOTE 8
It is desirable that the layout of washing and shower cubicles, and toilets (wet
compartments) with regard to distance from sleeping cabins is arranged to minimise the
number of ‘wet’ areas, e.g. wet areas should be located at each end and/or mid length of
cabin flats.
30
SECTION 5
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
21.1.2 General requirements for furniture and fittings
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
Sleeping cabins, dining areas and recreation spaces shall be fitted-out with
due regard of good ship’s husbandry.
Furniture and fittings shall normally be of modular construction.
A curtain or blind shall be fitted for each port-light/side-scuttle in every
sleeping/dining/recreation room.
The Design Authority shall be responsible for the specification of all soft
furnishings and ensuring compliance with extant toxicity and fire hazard
regulations.
The allocation of furniture to sleeping cabins shall provide lockable personal
stowage spaces for each member of the ship’s complement. The stowage
spaces are to be incorporated into the sleeping cabins so as to make best use
of the available space. The stowage space capacities provided shall not be
less than those specified in the following sub-paragraphs:
1.
Officers and Midshipmen, wardrobe with hanging space for eight suits
plus top shelf. In addition there shall be a minimum total stowage
capacity of 1.5 m3 for personal kit (including boot lockers and drawer
space).
2.
Warrant Officers and Senior Ratings, wardrobe with hanging space for
six suits plus top shelf. In addition there shall be a minimum total
stowage capacity of 0.75 m3 for personal kit (including boot lockers and
drawer space).
3.
Junior Ratings, wardrobe with hanging space for four suits plus top
shelf. In addition there shall be a minimum total stowage capacity of
0.60 m3 for personal kit (including boot lockers and drawer space).
Seating including upholstered armchairs and chairs, bench seats, corner seats,
fitted bespoke seating, dining chairs, and stools shall be provided.
Interior-sprung mattresses shall be provided.
All Officer’s cabins shall be fitted with a security container.
Drawers and lockers fitted beneath bunks are to be for the sole use of the
occupant of that bunk.
All personal drawers and cupboard units shall be fitted with a secure locking
arrangement.
Sleeping cabins, dining rooms and recreation spaces shall be fitted out with
furniture and fittings that may be either bespoke or ‘off the shelf’. The
standard and scope of provision of furniture shall reflect the typical
inventories listed at Annex D.
All portable furniture shall be capable of being stowed or secured for sea and
action.
Stowage for six pairs of shoes including at least one pair of boots and shoe
cleaning kit is to be provided in the vicinity of each bunk position.
Cap and coat hooks shall be provided outside dining and recreation areas for
at least 25% of the complemented occupants. Where it is necessary to fit two
tiers of hooks the lower tier hooks are to be arranged to be horizontally midpoint between the upper hooks.
Stowage for personal protective clothing (life-jacket, AGR, survival suit)
shall be provided within the sleeping cabin for each occupant.
31
DEF STAN 02-107/ ISSUE 2
SECTION 5
DESIGN REQUIREMENTS / GUIDANCE
21.1.3 Critical dimensions in accommodation spaces
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
All parts of accommodation spaces shall have clear headroom at every point
where full and free movement is necessary for occupants based on human
stature estimates for the anticipated life period of the ship. For further
guidance on human-anthropometry-related issues, see Annex C. Any
reduction in the headroom in any space or part of a space in the
accommodation spaces may be permitted if it is reasonable to do so and such
a reduction will not result in discomfort to the occupants.
Where ‘carcass’ furniture, e.g. cupboards, drawers, lockers, is fitted, a
clearance equal to the overall depth of the carcass plus a clearance allowance
is required in front of that furniture to allow easy removal of each furniture
item without interference or dismantling adjacent furniture items.
A clear space is required in front of desks and secretaires fitted in sleeping
cabins to allow adequate space for chair movement.
The horizontal distance between facing multi-tier bunks/bunk settees shall be
sufficient to allow free and unrestricted movement of the occupants. Refer to
Annex C for further information on bunk separation.
A vertical distance is required above each bunk to allow a sitting-up position
to be adopted based on human stature estimates for the anticipated life period
of the ship. For further guidance, refer to Annex C.
The horizontal distance in front of a multi-tier bunk/bunk settee and any
facing carcass furniture is to be sufficient to allow free and unrestricted
movement of the occupants with the facing furniture in use. If a multi-tier
bunk/bunk settee is facing a bulkhead or other permanent obstruction, the
distance between these is to be sufficient to allow free and unrestricted
movement of the occupants.
The horizontal distance between facing rows of carcass furniture and any
permanent obstruction is to be sufficient to allow free and unrestricted
movement of the person requiring access to the furniture.
Where settee modules are arranged as facing units the clearance between
them is to be sufficient to allow free and unrestricted access to each settee
when the other is in use.
Sideboard units and other similar items are to have a clear space in front of
them of at least the depth of the unit to allow for ease of access.
All dining tables are to have adequate clearances to allow seats at dining
tables to be accessible for waiter service in Officers dining areas, mess man
assisted self service in Senior Ratings dining areas, and self service in Junior
Ratings dining areas. Widths of gangways between groups of tables shall be
sufficient to allow free and unrestricted movement when seats are occupied.
The distance between the long near edge of tables and parallel bulkheads or
other permanent obstructions shall be sufficient to allow easy access to all
table seating positions when adjacent seating is in use. This clearance shall
also allow access for waiter-service and/or self-service use.
32
SECTION 5
k.
21.2
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
As a result of the functional requirements at Clause 21.1.3j above and the
hierarchical group functionality of the occupants the minimum acceptable
dimensions for dining room table placement with chairs in place are listed in
the following sub-clauses:
1.
Where tables are sited in rows, the distance between the long near edges
of tables in adjacent rows shall be a minimum of 1900mm for Officers,
1650mm for Senior Ratings and 1500mm for Junior Ratings.
2.
The distance between the long near edge of tables and parallel
bulkheads or other permanent obstructions shall be a minimum of
1250mm for Officers, 1000mm for Senior Ratings and 900mm for
Junior Ratings.
3.
Widths of gangways between groups of tables shall be at least 900mm.
Requirements for embarked military forces on large/medium-sized warships
a.
b.
Accommodation shall be provided in large and medium-sized surface
warships specified for carrying embarked forces.
The composition of the embarked force will vary according to the operational
need and the type of accommodation to be provided will need to take account
of scenarios ranging from accommodating a small unit of ten persons up to a
large military detachment comprising up to 250 persons. The duration these
embarked forces spend on board may also vary from a rapid transit lasting up
to ten days, to an extended deployment, which may involve periods of up to
six months on board.
21.2.1 Standards for embarked forces
a.
The standards that are to be applied for the provision of embarked forces
sleeping accommodation shall be in accordance with specifications for
Officers and Ratings as given in Table 2. The standards are:
1.
Senior Officers shall be provided with a standard HoD cabin with
shared en-suite facilities as specified for HoDs.
2.
All other embarked Officers shall be accommodated in a mix of singleberth and two-berth cabins each with a single integral washbasin as
specified for other Officers and non-complemented Officers. The ratio
shall be a minimum of 40% embarked Officers in single cabins and a
maximum of 60% embarked Officers in double cabins.
3.
Warrant Officers/RSM shall be accommodated in single-berth cabins
with a single integral washbasin as specified for Senior Chief Petty
Officers.
4.
Other Senior NCOs shall be accommodated in two-berth cabins with a
single integral washbasin as specified for other Senior Ratings.
5.
Junior NCOs and other ranks shall be accommodated in four-berth
cabins with separate shared washing facilities as specified for Junior
Ratings, Junior NCO and other ranks.
33
DEF STAN 02-107/ ISSUE 2
SECTION 5
b.
DESIGN REQUIREMENTS / GUIDANCE
The standards that are to be applied for the provision of embarked forces
bathrooms, showers and toilet facilities (excluding the Senior Officer) shall
be in accordance with specifications for Officers and Ratings as given in
Table 2. For additional Officers and Ratings that form part of the embarked
forces the standards are:
1.
An additional gender-neutral shower cubicle shall be provided for every
six Officers.
2.
An additional gender-neutral WC with washbasin shall be provided for
every six Officers.
3.
An additional gender-neutral shower cubicle shall be provided for every
eight Warrant Officers and NCOs.
4.
An additional gender-neutral WC with washbasin shall be provided for
every eight Warrant Officers and NCOs.
5.
Separate gender-specific multi washrooms fitted with ten washing
cubicles, mirrors, clothes hooks shall be provided for every forty other
ranks.
6.
An additional gender-neutral shower cubicle shall be provided for every
ten other ranks.
7.
An additional gender-neutral WC with washbasin shall be provided for
every ten other personnel.
8.
Two additional gender-neutral toilets with washbasin shall be provided
for every 40 persons and located adjacent to the embarked forces Junior
NCO and other ranks recreation space.
21.2.2 Dining areas for embarked forces
a.
The following increases shall be made to the ship’s complement dining rooms
allowances:
1.
Dining tables and seating in Wardrooms are to be increased by 33% of
Officers comprising the embarked forces.
2.
Dining tables and seating in Senior Rating dining rooms are to be
increased to ensure the number of places is sufficient to accommodate
greater than 50% of the combined, ship’s complement and embarked
forces Warrant Officers and Senior Ratings.
3.
Dining tables and seating in Junior Rating dining rooms are to be
increased to ensure the number of places is sufficient to accommodate a
minimum of 33% of the combined ship’s complement and embarked
forces Junior Ratings and other ranks at one sitting.
21.2.3 Recreation spaces for embarked forces
a.
The following increases shall be made to the ship’s complement recreation
space allowances:
1.
Seating in Wardrooms and Anterooms is to be increased by 33% of
Officers comprising the embarked forces.
2.
Seating in Senior Rating recreation spaces to be increased by 33% of
Warrant Officers and NCOs comprising the embarked forces.
34
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
SECTION 5
3.
4.
5.
6.
21.3
A dedicated dual role area shall be provided for use as a Junior NCOs
and other ranks’ recreation space, and the embarked forces briefing
room.
The recreation space shall be designed to accommodate all embarked
forces with 60% seated and 40% standing. The deck area allowance to
be allocated for this space is 0.4m2 per person comprising the embarked
forces.
The dedicated dual-role area is to be furnished with tables, chairs,
entertainment equipment (TV, video, music etc) and refreshment
facilities for use as the Junior NCOs and other ranks’ recreation space.
The dedicated dual-role area is to be fitted for use as a briefing room
with conference-type facilities, which shall include computer-based
presentation equipment, overhead projector and screen, and a
whiteboard.
Requirements for accommodation on small surface warships
a.
b.
Small surface warships are defined at Annex B.1. Navy, Army or Air Force
personnel may operate some of these ships. For details of equivalent ranks of
the three services refer to QR(RN).
Operational requirements for small surface warships cover a wide variety of
roles, making it difficult to specify definitive requirements for
accommodation both to area standards and furniture items. Clauses 21.3.1 to
21.3.4 set the minimum standards to be achieved.
21.3.1 Minimum deck area allowances for small surface warship accommodation
a.
b.
Minimum deck area allowances for small surface warships accommodation
are given in Table 3.
The criteria provided in Table 3 shall be used as the design basis for ship’s
complement accommodation. The Design Authority shall employ innovative
design techniques to improve on these minimum requirements.
35
DEF STAN 02-107/ ISSUE 2
SECTION 5
DESIGN REQUIREMENTS / GUIDANCE
Table 3 Minimum deck area allowances on small surface warships
Occupant(s)
Nett area (m2)
Compartment
berth
cabin.
7.5
2.5
Commanding Officer
1
x
Single
Miniature bathroom
First Lieutenant/HoD
Officers single-berth cabin/integral washbasin.
All other Officers
Officers two-berth cabins.
All Officers
including CO
Wardroom, dining and recreation space.
Senior Rating
Single-berth cabin.
5 per person
Senior Rating
Two-berth cabin.
3 per person
Senior Rating
Senior Rating dining and recreation space.
1.75 per person
Junior Rating
Four-berth cabin.
2.5 per person
Junior Rating
Junior Rating dining and recreation space.
1.25 per person
Officer wash room
One washbasin for each Officer occupying a
cabin not fitted with washbasin.
1.15 per person
SR wash room
One washbasin per two Senior Ratings.
1.25 per person
JR wash room
One washbasin per three Junior Ratings.
1.25 per person
Gender-neutral all
rank shower cubicles
One shower unit / 5 ship’s complement.
2 / single unit
Gender-neutral all
rank toilet units
One WC with washbasin / 5 ship’s
complement.
6
4 per person
2.5 per person
2.25 / single unit
21.3.2 General requirements for small surface warship accommodation
a.
b.
c.
d.
e.
The general requirements for small surface warship accommodation in the
following sub-clauses are additional to, and take precedence over, the
requirements at Clause 21.1.1.
Where space permits Commanding Officers of small surface warships shall
be provided with a miniature bathroom with direct access to the sleeping
cabin. Where a miniature bathroom is provided, washing facilities are not
required in the cabin.
All Officers cabins shall be fitted with a security container.
Complemented Officers shall be provided with sleeping cabins and a
combined wardroom/recreation space.
One single berth Officer cabin shall be located adjacent to the Bridge for use
by the Navigating Officer.
36
SECTION 5
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
Where space constraints prevent the full implementation of area allowance
for Officer two-berth cabins and it is not practicable to fit washbasins in the
cabins, the Officer bathroom shall be equipped to ensure each Officer is
provided with a wash basin.
The wardroom shall include dining facilities for all Officers including the
Commanding Officer at a single sitting.
The wardroom design shall include a pantry with serving hatch and
incorporate a sideboard, bar cupboard with cold shelf and space provision for
recreation facilities including TV, VCR and music centre.
Complemented Senior Ratings (SR) shall be provided with a mix of singleberth and two-berth sleeping cabins and a combined dining/recreation space.
The SR dining area shall be fitted out for a minimum of 50% of the total SR
complemented at one sitting.
The design of the SR dining area shall incorporate a sideboard, a small
domestic automatic refrigerator, bar cupboard and recreation facilities.
Junior Rating (JR) sleeping arrangements shall be in the form of four-person
cabins.
Junior Ratings shall be provided with a combined dining and recreation space
capable of seating half of the JR complement on fixed settee type seating, and
a third of the JR complement at the dining table.
The allocation of furniture to sleeping cabins shall provide lockable personal
stowage spaces for each member of the ship’s complement. The stowage
spaces are to be incorporated into the sleeping cabins so as to make best use
of the available space. The stowage space capacities provided shall not be
less than those specified in the following sub-paragraphs:
1.
Officers and Midshipmen, wardrobe with hanging space for eight suits
plus top shelf. In addition there shall be a minimum total stowage
capacity of 1.5 m3 for personal kit (including boot lockers and drawer
space).
2.
Warrant Officers and Senior Ratings, wardrobe with hanging space for
six suits plus top shelf. In addition there shall be a minimum total
stowage capacity of 0.75 m3 for personal kit (including boot lockers and
drawer space).
3.
Junior Ratings, wardrobe with hanging space for four suits plus top
shelf. In addition there shall be a minimum total stowage capacity of
0.60 m3 for personal kit (including boot lockers and drawer space).
The allocation of furniture to sleeping cabins shall provide the required
lockable personal stowage space allowances for each member of the ships
complement.
Where possible a space shall be allocated for use as an exercise area, and
fitted with multi-discipline exercise equipment.
21.3.3 Furniture and fittings in accommodation spaces
a.
General requirements for furniture and fittings in accommodation spaces on
small surface warships are to comply with the requirements at Clause 21.1.2,
where practicable.
37
DEF STAN 02-107/ ISSUE 2
SECTION 5
DESIGN REQUIREMENTS / GUIDANCE
21.3.4 Critical dimensions in accommodation spaces
a.
21.4
Critical dimensions in small surface warship accommodation spaces are to
comply with the requirements at Clause 21.1.3 where practicable.
Requirements for accommodation in submarines
21.4.1 General requirements for accommodation in submarines
a.
The minimum standards specified in Clause 21.4.2 to Clause 21.4.4 are to be
applied to future-build submarines.
Additional accommodation for Officers, Warrant Officers, Chief Petty
Officers and Petty Officers who are carried temporarily for training, trials and
inspection roles, are in addition to the ships complement. Specific
accommodation requirements for this facility shall be identified in the SRD.
b.
21.4.2 Minimum deck area allowances for accommodation in submarines
a.
Minimum deck area allowances for accommodation in submarines are given
in Table 4. These criteria shall be used as the design basis for ships
complement (including margins) accommodation.
The criteria provided in Table 4 shall be used as the design basis for
submarine complement accommodation in conjunction with the SRD/URD.
The Prime Contractor shall employ innovative design techniques to meet or
improve upon these minimum requirements.
b.
Table 4
Minimum deck area allowances on submarines
Occupant(s)
Compartment
Commanding Officer (1) = Single-berth cabin.
(2) = En-suite miniature bathroom.
Nett area (m2)
(1)
(2)
6.50
2.00
HoD
Two single-berth cabins with integral
washbasin.
4.00 per person
HoD
One two-berth cabin with one integral
washbasin per cabin.
4.00 per person
Other Officer
Two, three and four-berth cabins with one
integral washbasin per cabin.
4.00 per person
All Officers,
including CO
Wardroom, combined dining and recreation
space.
1.75 per person
All Officers,
excluding CO
A separate bathroom to include washbasins
and shower cubicles to be located close to
sleeping cabins. Each of these facilities to be
provided in the ratio of one per every six
persons. Each facility is to be suitable for use
by either gender.
2.00 per facility
38
SECTION 5
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
Table 4 (continued) Minimum deck area allowances on submarines
Occupant(s)
Warrant Officers and
Coxswain
Senior CPOs
Other Senior Rating
Compartment
Single-berth cabin with integral washbasin.
Nett area (m2)
3.50 per person
Two-berth cabin with integral washbasin.
2.50 per person
Four-berth cabins with integral washbasin.
2.00 per person
Senior Rating combined dining and recreation 1.00 per person
Senior Rating
space.
A separate bathroom to include washbasins
and shower cubicles to be located close to
Senior Rating
sleeping cabins. Each of these facilities to be 2.00 per facility
provided in the ratio of one per every 12
persons. Each facility is to be suitable for use
by either gender.
Junior Rating
Four-berth cabins.
1.75 per person
Junior Rating
Six-berth cabins.
1.50 per person
Junior Rating
Junior Rating dining and recreation spaces.
0.75 per person
A separate bathroom to include washbasins
and shower cubicles to be located close to
Junior Rating
sleeping cabins. Each of these facilities to be 2.00 per facility
provided in the ratio of one per every twelve
persons. Each facility is to be suitable for use
by either gender.
WC’s with washbasin suitable for use by
Officer, Senior
either gender and all ranks are to be provided
Rating and Junior
in the ratio of one WC unit per eight persons. 2.00 per unit
WC units are to be located in close proximity
Rating
to sleeping cabins in proportion to the number
of occupants in each area.
Urinals are to be provided which are suitable
Officer, Senior
for use by all male ranks in the ratio of one
Rating and Junior
urinal per ten male persons. A washbasin is to 2.00 per facility
be provided with each urinal facility. Urinals
Rating
are to be located in close proximity to sleeping
cabins and working areas.
An additional WC with washbasin suitable for
Officer, Senior
use by either gender or all ranks shall be 2.00 per facility
Rating and Junior
provided adjacent to high density watchRating
keeping areas.
Exercise area equipped with exercise
All complement
equipment. One exercise station per minimum 3 per station
30 persons
NOTE 1. In submarines, the purpose of using urinals is to reduce the use of flushing
water, and associated sewage capacity with its operational constraints, and provide ease of
cleaning.
39
DEF STAN 02-107/ ISSUE 2
SECTION 5
DESIGN REQUIREMENTS / GUIDANCE
21.4.3 Additional requirements for accommodation in submarines
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
Where space permits Commanding Officers of submarines shall be provided
with a miniature bathroom with direct access to the sleeping cabin. Where a
miniature bathroom is provided, washing facilities are not required in the
sleeping cabin.
Commanding Officers and Supply Officer cabins shall be fitted with an
appropriate security container.
Complemented Officers shall be provided with sleeping cabins and a
combined wardroom/recreation space.
Where space-constraints prevent the full implementation of area allowance
for two, three and four berth Officers cabins and it is not practicable to fit
washbasins in the cabins, the Officers bathroom shall be equipped to ensure
there is a minimum of one washbasin for every two Officers.
The design of the Wardroom shall incorporate tables and seating (based on
the functionality and operational duties of officers) for at least 80% of the
complemented (including margins) Officers. The Wardroom shall be fitted
with recreation facilities, a pantry with serving hatch, sideboard, bar area
(with cold shelf) suitable for dispensing soft drinks and a range of alcoholic
beverages and a glassware storage cabinet capable of securing for sea, action
and noise husbandry.
The wardroom shall include dining facilities for all Officers including the
Commanding Officer at a single sitting. The Wardroom pantry shall include
a sink unit, small domestic refrigerator, food heating equipment, facilities for
making hot/cold drinks and stowage cabinets for crockery and tableware
capable of securing for sea, action and noise husbandry.
Senior Rating (SR) shall be provided with a mix of one and two and four
berth sleeping cabins and a dedicated combined dining/recreation space.
Where space-constraints prevent the full implementation of area allowance
for two and four berth SR cabins and it is not practicable to fit washbasins in
all the cabins, the SR bathroom shall be equipped to ensure there is a
minimum of one washbasin for every four SRs.
The design of the SR combined recreation and dining area shall incorporate
tables and seating (based on the functionality and operational duties of SRs)
for at least 70% of the complemented SRs. The area shall be fitted with
recreation facilities, a snack preparation area, sideboard, small domestic
refrigerator, bar area (with cold shelf) suitable for dispensing spirits/beer/soft
drinks and glassware storage cabinet capable of securing for sea, action and
noise husbandry.
The dining area in the SR mess shall include dining facilities for 50% of SRs.
The SR snack preparation area shall include a sink unit, small domestic
refrigerator, food heating equipment, facilities for making hot/cold drinks and
stowage cabinets for crockery and tableware capable of securing for sea,
action and noise husbandry.
Junior Ratings (JRs) shall be provided with a mix of four-berth and six-berth
sleeping cabins, separate washing facilities and a dedicated combined
dining/recreation space.
40
SECTION 5
m.
n.
o.
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
The design of the JR combined recreation and dining area shall incorporate
tables and seating (based on the functionality and operational duties of JRs)
for at least 60% of the complemented JRs. The area shall be fitted with
recreation facilities, a refreshment preparation area with soft drinks
dispensing facility.
The dining area in the JR mess shall include dining facilities for 50% of JRs.
The JR refreshment preparation area shall include a sink unit, small domestic
refrigerator, food heating equipment, facilities for making hot/cold drinks and
stowage cabinets for crockery and tableware capable of securing for sea,
action and noise husbandry.
21.4.4 Furniture and fittings in submarine accommodation
a.
b.
c.
d.
e.
f.
g.
h.
Sleeping cabins, dining areas and recreation spaces shall be fitted out with
due regard to good ship husbandry practices.
Furniture and fittings shall be of modular construction.
The Design Authority shall be responsible for the specification of all soft
furnishings and ensuring compliance with extant toxicity and fire hazard
regulations.
Seating including upholstered armchairs and chairs, fitted bespoke seating,
dining chairs, and stools shall be provided.
All cabins shall be fitted with one telephone, at least one 115Vac switched
power socket, one 240Vac switched power socket per occupant, a connection
point to the submarine IT system.
Drawers and lockers fitted beneath bunks are to be for the sole use of the
occupant of that bunk.
All drawers and cupboard units for use as a personal stowage space shall be
fitted with a secure locking arrangement.
The allocation of furniture to sleeping cabins shall provide lockable personal
stowage spaces for each member of the ship’s complement. The stowage
spaces are to be incorporated into the sleeping cabins so as to make best use
of the available space. The stowage space capacities provided shall not be
less than those specified in the following sub-paragraphs:
1.
Officers and Midshipmen, wardrobe with hanging space for eight suits
plus top shelf. In addition there shall be a minimum total stowage
capacity of 1.5 m3 for personal kit (including boot lockers and drawer
space).
2.
Warrant Officers and Senior Ratings, wardrobe with hanging space for
six suits plus top shelf. In addition there shall be a minimum total
stowage capacity of 0.75 m3 for personal kit (including boot lockers and
drawer space).
3.
Junior Ratings, wardrobe with hanging space for four suits plus top
shelf. In addition there shall be a minimum total stowage capacity of
0.60 m3 for personal kit (including boot lockers and drawer space).
4.
Shared wardrobes or cupboards containing personal items of kit that are
not normally required at sea may be located outside of sleeping cabins
in an area within or adjacent to the cabin flat.
41
DEF STAN 02-107/ ISSUE 2
SECTION 5
i.
j.
DESIGN REQUIREMENTS / GUIDANCE
Stowage lockers shall be provided in each cabin for personal protective
clothing (EBS mask) for each occupant.
A separate communal stowage area for foul-weather gear and overalls shall
be provided in each cabin flat.
21.4.5 Critical dimensions in submarine accommodation spaces
a.
21.5
Critical dimensions in sleeping cabins and dining/recreation areas on
submarines are to conform to the requirements of Clause 21.1.3 where
practical. Deviations from these requirements are to be agreed with the
Design Authority.
Requirements for bunks in all vessels
a.
b.
c.
d.
e.
f.
g.
h.
i.
Every sleeping cabin shall be fitted with a bunk for each person to be
accommodated.
Bunks shall normally be sited in the fore and aft direction with the head-end
forward. Where bunks are fitted athwartships the head-end of the bunk shall
be inboard.
The minimum inside dimension of bunks shall be adequate to accommodate
mattresses of a size not less than that recommended for the latest available
data on human stature measurement. Refer to Annex C.
Every bunk shall be fitted with either: a spring bottom or spring undermattress and a top mattress of a material which will resist damp and is
unlikely to harbor vermin; or, a suitable resilient mattress fitted on a suitably
ventilated base. Mattresses shall be of materials whose fire characteristics are
selected in accordance with the Def Stan 07-247. Mattresses shall be of a size
not less than that recommended for the latest available data on human stature
measurement. Refer to Annex C.
Bunks shall not be arranged in tiers of more than two.
Double-tier bunks shall only be fitted in sleeping cabin compartments with
deck head linings.
In every double-tier bunk the vertical space between the bunks and above the
top bunk shall be sufficient to allow a sitting up position in comfort for the
typical UK male human stature. Human stature data is to be used at the ship
planning concept stage and allowance made for height increase over the
expected life period of the vessel. Refer to Annex C.
In multi-berth sleeping cabins, where bunks abut each other, rigid screens
made of wood or other suitable opaque material shall separate them. In
addition privacy curtains or other privacy arrangements are to be fitted to all
bunks in multi-berth sleeping cabins. Privacy curtains are to be in the colour
specified in the MDS.
Where a double-tier bunk is fitted, a suitable facility shall be provided to
enable easy access to the upper berth. Where jumping bars are provided to
facilitate access to and egress from bunks, the jumping bars are to be sited
approximately 700mm from the bunk head and 230mm outside the bunk edge
to provide a natural point of assistance when entering or exiting top bunks.
42
SECTION 5
j.
k.
l.
m.
21.6
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
The framework of each bunk, and its leeboards or lee rails, shall be
constructed of metal or some other material, which is hard, smooth and
unlikely to become corroded. If the bunk is constructed of tubular frames,
the frames shall be completely sealed with rounded corners.
A bunk light shall be fitted and sited at the head-end of all bunks at a height
that allows reading and writing in the sitting up position.
Two in number complete sets of bunk upholstery shall be provided. The
colour of the bunk upholstery will be as directed by the MDS chosen for
individual compartments.
Stowage facilities for spare bunk upholstery and other spare soft furnishings
shall be provided.
Requirements for miscellaneous spaces
a.
b.
The following miscellaneous spaces shall be provided.
1.
Training and education.
2.
Space for religious observance.
3.
Libraries.
4.
Quiet rooms.
5.
Exercise areas.
Where design constraints prevail Items 21.6a.1, 21.6a.2 and 21.6a.3 may be
incorporated into a common multi-purpose space provided there is no loss of
functionality for each item.
21.6.1 Personal training and education facilities
a.
b.
c.
d.
e.
f.
g.
h.
i.
A dedicated area for personal training and education shall be provided on all
large surface warships.
In medium-sized surface warships, personal training and education facilities
may be incorporated within the confines of spaces primarily designed for
other purposes, e.g. dining areas.
Where the provision of facilities for personal training and education on small
surface warships and submarines are impractical, provision shall be made
using local support units.
IT-based training areas shall have a seating capability of individual
workstations for 2% of the total ships complement, rounded up to the nearest
100 persons.
The dedicated area shall include a dedicated lecturer workstation in addition
to the allowance at Clause 21.6.1d.
The minimum space requirement for individual workstations shall be 2.5m2.
The minimum space requirement for the lecturer workstation shall be 3m2.
Seating shall be provided for all individual and lecturer workstations.
Dedicated training and education areas and spaces designed to have training
facilities shall be provided with specialised equipment, fittings and fixtures
which will typically include the following.
1.
Electrical sockets for portable electrical equipment;
2.
Computer equipment;
3.
Sound recording equipment;
43
DEF STAN 02-107/ ISSUE 2
SECTION 5
4.
5.
6.
DESIGN REQUIREMENTS / GUIDANCE
Screen display facility, visible from all work-stations;
Lockable stowage cupboards to accommodate items listed above;
Lockable bookcase and cupboard for lecturer-controlled material.
21.6.2 Place of religious observance
a.
b.
c.
d.
Facilities shall be provided for religious observance with a minimum seating
capability of 8% of the ships complement.
These facilities shall be located in either a dedicated area, or an area which is
used for other purposes (i.e. training and education etc.). The religious
observance facilities shall be fitted out to suit a range of religious
denominations.
Small vessels shall be fitted with limited facilities for religious observance
located at the centre of an available uncluttered bulkhead to form a religious
focal point.
Where the provision of facilities for religious observance on small warships
is impractical, provision shall be made using local support units.
21.6.3 Quiet rooms
a.
b.
c.
d.
e.
Quiet rooms shall be accessible to the whole ship’s complement.
Where space permits, dedicated quiet rooms are desirable.
On small ships quiet room facilities may be incorporated within the confines
of spaces primarily designed for other purposes, e.g. additional cabins for
sea-riders.
Quiet rooms shall be fitted with desk and seating arrangements for 2% of the
ship complement rounded up to the nearest 100 persons.
Space provision shall be 2.5m2 per person as calculated at item (d.) above.
21.6.4 Library facilities
a.
b.
c.
d.
e.
All vessels shall be provided with library facilities.
Library facilities shall be accessible to the whole ship’s complement.
On large ships the library facilities may be incorporated within the quiet
room.
On medium sized ships the library facilities may be incorporated within the
Junior Rating dining room or within the confines of another space primarily
designed for other purposes. In these spaces library facilities shall not
prejudice the primary function of the compartment in which they are situated.
Bookcases shall be provided and include the following features:
1.
Bookcases shall be fitted with removable doors and secure locking
arrangements.
2.
Shelving shall be provided with adjustable shelf heights (allowing a
mix of approximately 260mm and 300mm between shelves), and keepbattens at mid-shelf height.
3.
A section of shelving shall be dedicated for the stowage of magnetic
media (DVD, CD ROM, video tapes, audio cassettes etc).
44
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
SECTION 5
4.
The total shelf length required in bookcases is related to the ship
complement. Sufficient bookshelf space shall be provided to store one
book or video/DVD for every five persons comprising the ship
complement.
21.6.5 Exercise areas
a.
b.
c.
Dedicated common exercise compartment(s) or area(s) shall be provided
outside the boundaries of the accommodation area.
A range of permanently fitted exercise equipment shall be provided and
installed in the exercise compartment(s) or area(s). The staff at the RN
Physical Training School are the RN subject matter experts regarding
physical training equipment, and are to be consulted in the early stages of
design in order to ensure that best use is made of the available space, and the
most suitable equipment is procured to fill it.
Storage arrangements for the safe stowage of exercise equipment and
additional components shall be provided.
22
ENVIRONMENTAL CONSTRAINTS AND AMBIENT CONDITION
REQUIREMENTS
22.1
Ship motion
a.
22.2
To afford protection to personnel in accommodation spaces in rough sea
conditions:
1.
Handrails with rounded corners and edges shall be provided in
stairways and where necessary in passageways and shall be of robust
construction and firmly secured to bulkheads;
2.
Fixed furniture shall be firmly secured and rattle-free;
3.
Means shall be provided to stow and secure portable furniture for sea
and action;
4.
Doors, including those to cupboards and other items of furniture, shall
be so retained as not to open accidentally;
5.
Drawers shall be so designed such that they do not slide open / fall out
accidentally or impact on noise husbandry;
6.
Tables, shelves, stowage racks and other similar fittings shall be fitted
with retaining lips or bars or with non-slip surfaces so that objects
placed on them will not slide off and may be secured for sea, action and
noise husbandry.
Air conditioning and ventilation
a.
Every accommodation space shall be provided with an air conditioning and
ventilation system. These shall be capable of maintaining the air in that space
sufficiently pure for the health and comfort of the occupants, in all conditions
of weather and climate that the ship is likely to encounter when at sea, and
alongside.
45
DEF STAN 02-107/ ISSUE 2
SECTION 5
b.
c.
d.
e.
f.
22.3
b.
A drinking-water tap and sink with drainage shall be provided in dining
rooms, bars, recreation areas, cabin flats and watch-keeping work areas.
Ice making machines shall be provided in dining rooms, bars and recreation
areas.
Vibration
a.
b.
22.5
The ventilation system is not to be common to other compartments containing
noisy equipment.
The ventilation system shall be additional to any openings (companionways,
doors, scuttles etc.) and shall be so arranged as to keep noise levels to a
minimum and not cause undue vibration.
The ventilation system shall be designed to maintain the air at a satisfactory
temperature and relative humidity as compared with outside conditions, and
ensure a sufficiency of air changes in all air-conditioned spaces. The design
of the system shall take account of the particular characteristics of operations
at sea and not produce unacceptable noise or vibrations.
Air-conditioning and ventilation systems shall be capable of being controlled
from remote and local positions.
The Design Authority shall be responsible for the specification of
requirements for air-conditioning and ventilation in accommodation spaces.
Drinking water
a.
22.4
DESIGN REQUIREMENTS / GUIDANCE
Accommodation compartments shall be so situated, constructed and arranged
such that the effects of vibration from other parts of the ship are as low as
reasonably practicable.
Pipe-work, ventilation trunking and rod gearing that also transit through
compartments with high levels of vibration, are not to be run through
accommodation spaces.
Maximum permitted noise levels
a.
b.
c.
The location, construction and arrangement of accommodation compartments
shall be designed to exclude airborne noise, noise coming from other parts of
the ship, and noise generated within other parts of the accommodation area so
far as is reasonably practicable.
All moving parts of accommodation spaces including access doors, hatches,
equipment doors, flaps, cupboard and drawer openings and sink fittings shall
be designed for silent operation under normal warship operational conditions
at sea. The design shall ensure that the use of retaining mechanisms, end
stops and rubber snubbers are reliable and maintenance free.
Noise effects on human health and performance are discussed in Def Stan 00025 Part 5. This standard concludes that if, after all practicable means of
noise reduction have been employed, unprotected noise exposure approaches
or exceeds a level of 85 dB (A), there is a probability of:
1.
Sleep disturbance and general annoyance to off-watch personnel in
living spaces.
46
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
SECTION 5
2.
3.
4.
Effects on general physical health, other than on hearing.
Psychological effects on performance.
Effects of noise in masking speech communication and other wanted
sounds.
The maximum permitted noise level in accommodation spaces on all vessels
as stated in NES 810 is:
1.
50dB(A) when the ship is at anchor or alongside and using own ship’s
electrical supply.
2.
60dB(A) when the ship is at sea under normal cruising conditions.
To avoid sleep disturbance, transient or pulsed noise, e.g. sonar
transmissions, should not have a rms value greater than 10dB in excess of the
ambient noise level in sleeping cabins.
Although the armed services are currently exempt from the legal noise limits
stated in the European Union Health and Safety Framework Directive
89/391/EEC, these regulations should be regarded as best practice. The
guidance provided in this document is in line with the European Directive at
the time of release.
d.
e.
f.
22.6
Lighting
a.
The requirements for ships red and white lighting including accommodation
spaces are to be consistent with the requirements for lighting for the overall
ship.
Minimum white light requirements for specified accommodation spaces are
listed in Table 5.
b.
Table 5
Minimum white light requirements for accommodation spaces
Accommodation space
Point of measurement (see Note 1)
Illumination
level (Note 2)
(1)
At general measurement points.
100 lux
(2)
At every mirror.
200 lux
(3)
At every seat at a writing desk or table.
300 lux
Sleeping cabins and day
rooms
(4)
At not less than half the seats (other than
those mentioned in (3) above) in a
sleeping cabin provided for use of more
than one person.
300 lux
Dining rooms
(1)
At general measurement points.
150 lux
(2)
At every table position.
300 lux
47
DEF STAN 02-107/ ISSUE 2
SECTION 5
DESIGN REQUIREMENTS / GUIDANCE
Table 5 (continued) Minimum white light requirements for accommodation spaces
Accommodation space
Wardrooms, Anterooms,
Messrooms, Recreation
rooms (including rooms
for watching films, TV,
hobbies and games),
exercise areas
Point of measurement (see Note 1)
Illumination
level (Note 2)
(1)
At general measurement points.
100 lux
(2)
At every recreational table.
150 lux
(3)
At every seat at a writing desk or table.
300 lux
(4)
At not less than half the seats (other than
those mentioned in (3) above).
300 lux
(5)
In recreation spaces, 50% of lighting shall
be incandescent and separately
controllable to any fluorescent lighting.
Schoolrooms, quiet
rooms, libraries, places
of worship
(1)
At general measurement points.
150 lux
Sanitary spaces
(1)
At general measurement points.
100 lux
(2)
At every mirror.
200 lux
(1)
(2)
At general measurement points.
At the head of each stairway, ladder and
Passageways,
hatchway.
companionways, lobbies
100 lux
(3) At or near the doors of lockers provided
and corridors
for foul weather gear or soiled working
clothes.
(4) At general notice boards.
NOTE 1
In this Standard, “general measurement points” for white light requirements,
mean, in relation to any space, those points which, measured at a height of 1m above the
floor deck level, fall on an imaginary line drawn vertically through the following points:
a. Every point mid-way between every 2 adjacent lamps in that space;
b. Every point mid-way between any lamp and any position on the boundary of
that space to which that lamp is nearer than any other lamp; and
c. Where any part of the space available for free movement is shielded from the
direct rays of a lamp by a re-entrant angle formed in the boundary of that space, the
central point of the space so shielded.
NOTE 2
The illumination levels quoted in this Table are the minimum levels required
under the following conditions:
a. The illumination levels specified are to be measured on acceptance with new
lamps fitted, and after they have had approximately 100 hours of use.
b. When the lamps, paintwork and other surface finishes are new, the luminance
in the horizontal plane when measured at the points specified in this Table shall be
steady and maintained.
48
SECTION 5
22.7
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
Switched power sockets and antennae sockets
22.7.1 115Vac switched power sockets
a.
115Vac switched, 5A rated power sockets are to be fitted in all day/dining
cabins, cabins, dining and recreation spaces and passageways. These sockets
are to be suitable for use with portable apparatus (vacuum cleaners, deck
polishers, electric domestic irons and other portable equipment) designed for
direct connection to the ship’s 115Vac supply. In other spaces the scale of
fitting will be based on obtaining complete coverage of the
areas/compartments on the normal length of cable fitted to a standard vacuum
cleaner/deck polisher.
22.7.2 240Vac switched power sockets
a.
b.
c.
d.
Shaving sockets are to be fitted in all sleeping cabins; they are to be
independently provided on a scale of one per single berth cabin and one per
two persons in multi-berth cabins.
240Vac switched power sockets for private equipment shall be fitted in all
sleeping cabins, dining rooms and recreation spaces. The allowance for
sockets shall be specified by the prime contractor, and shall include at least
one socket for each item of portable electrical equipment to be installed, and
at least one socket for each occupant of a sleeping cabin.
240Vac switched socket outlets are to be standard domestic 5A rated square
pin, single pole switched type.
240Vac sockets are to be fitted separately from the portable apparatus sockets
at Clause 22.7.1 ensuring non-interchangeability with any other system
operating at a different voltage.
22.7.3 Antennae sockets
a.
b.
c.
SRE system output sockets are to be fitted in sleeping cabins, recreation
spaces, dining rooms and passageways adjacent to SRE speaker positions.
Antennae Sockets for TV Receivers and VCR/DVD are to be fitted in
day/dining cabin suites and recreation spaces. These sockets are to be fitted
adjacent to the space allocated for the stowage of the TV receivers and
VCR/DVDs.
Computer terminal sockets connected to the ships intranet system are to be
fitted in sleeping cabins in the ratio of one per occupant, and in recreation
spaces in the ratio of one per 25 persons comprising the hierarchical group
occupying the space.
49
DEF STAN 02-107/ ISSUE 2
SECTION 5
23
DESIGN REQUIREMENTS
23.1
Construction requirements
DESIGN REQUIREMENTS / GUIDANCE
23.1.1 General requirements
a.
b.
c.
All accommodation compartments, except storage rooms/spaces shall,
wherever practicable, be located so as to minimise the effects of ship
motions.
Accommodation compartments shall be so situated, constructed and arranged
as to ensure the exclusion from the accommodation of fumes originating in
other areas/spaces in the ship.
For the efficient performance of damage control operations, the shipside and
main watertight bulkheads shall be kept as clear as practicable from
permanent fittings. Where fitted, linings and items of furniture shall be
readily portable to expedite periodic surveys of the structure.
23.1.2 Structural divisions between accommodation spaces and other parts of ship
a.
Every deck, bulkhead and deckhead which separates any part of the ship
complement accommodation from a space used as: a machinery space;
battery compartment; store room; chain locker; a room for storing fireextinguishing gases; magazine, paint/flammable store; shall be of gastight
and watertight construction.
23.1.3 Internal bulkheads between accommodation compartments
a.
b.
c.
Subject to Clause 23.1.3.b, bulkheads which separate any part of the
accommodation from sanitary accommodation; laundry/drying rooms;
galleys; cold store rooms; dry provision store rooms; shall be of gastight
construction.
The requirements of Clause 23.1.3.a, shall not apply to bulkheads which:
1.
Separates a space appropriated for a particular use from another space
appropriated for the same use;
2.
A private bathroom from the sleeping cabin of the person for whose use
it is provided, if there is direct access from the sleeping room to the
private bathroom.
There shall be no openings in any bulkhead separating any sanitary
accommodation, laundry or drying room from any part of the crew
accommodation except a passageway, recreation deck space or other sanitary
accommodation, laundry or drying room; nor in a bulkhead separating a
galley from a sleeping room.
23.1.4 Accommodation compartment decks
a.
Decks, which are directly over an oil or fuel tank, shall be oiltight and
gastight.
50
SECTION 5
b.
c.
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
Every deck shall have a surface, which provides a good foothold and can be
easily kept clean.
Every deck in sanitary accommodation shall be covered with fully vitrified
tiles which are impervious to liquids and provides a good foothold when wet.
Tiles shall be laid such that the joins where the deck meets the bulkheads are
rounded to avoid crevices.
23.1.5 Access and escape arrangements for accommodation compartments
a.
b.
c.
d.
e.
f.
Arrangements for the escape of personnel from accommodation spaces are to
comply with Def Stan 02-149 - Access Policy In Surface Ships.
Every entrance into the crew accommodation from the open deck shall be so
situated and constructed to provide protection against the weather and sea to
the greatest extent practicable. The entrances shall be so situated that the
crew accommodation is accessible at all times and in all weathers.
Access doors shall be standard, aluminium alloy double skin, hinged or
sliding doors with kick-out panels. Wherever practical it is desirable that
sliding doors are used to maximize the efficient use of the accommodation
compartment area.
There shall be at least one separate means of access, either direct or via not
more than two rooms forming part of a suite, to any sleeping room, day room,
mess room, recreation room, study, office or sanitary accommodation, from
an enclosed passageway.
An escape route shall be provided for each accommodation compartment.
Each escape route shall lead from the accommodation compartment to a
suitably sited opening (which may be a normally used entrance) on to the
weather deck. The escape route should not pass through propulsion
machinery spaces, galleys or other spaces where the risk of injury from fire,
steam or other similar cause is comparatively high, and shall be so arranged
as to provide a ready and unimpeded means of escape from each
accommodation compartment to the ship’s life saving equipment.
Where escape routes are by way of stairway or ladder ways, those stairways
or ladder ways shall be constructed of steel and fitted with handrails.
23.1.6 Pipes in accommodation spaces
a.
b.
c.
Except where no other arrangement is reasonably practicable,
steam/hydraulic supply and return pipes for steering gear, winches and
similar equipment shall not pass through the ship’s complement
accommodation.
Where such pipes pass through the ship’s complement accommodation they
shall pass through passageways only, shall be properly encased and
constructed to maintain personnel safety and comfort levels.
Where any parts of ventilator trunks to other ship’s spaces pass through the
ship’s complement accommodation, they shall be made of steel or other
suitable material and shall be gastight.
51
DEF STAN 02-107/ ISSUE 2
SECTION 5
d.
e.
f.
23.2
DESIGN REQUIREMENTS / GUIDANCE
Pipes used for ship’s complement accommodation services in particular, soil
pipes and waste pipes shall be so constructed as to minimise the risk of
obstruction and to facilitate cleaning.
Soil pipes shall not pass overhead in sleeping rooms, dining rooms, recreation
spaces or the hospital, except where it is impracticable to place them
elsewhere.
Soil pipes shall be insulated to remove noise disturbance in accommodation
areas through which they pass.
Personal-related design requirements
a.
b.
c.
d.
e.
Curtains or alternative screening arrangements shall be fitted at each bunk in
multi-berth cabins to provide each occupant complete visibility privacy.
Where curtains are used for privacy, two sets shall be provided.
Curtains are to be provided for all access doors to the compartments/spaces,
scuttles, port lights and dividing screens.
Two sets of removable covers are to be provided for every upholstered chair,
settee unit and fitted (bespoke) seat.
The design for covers and curtain material shall be in accordance with the
MDS.
Storage provision shall be made for the stowage of spare soft furnishings
within accommodation spaces.
23.2.1 Sleeping cabins
a.
b.
All sleeping cabins shall be of modular construction and fitted with standard
services which shall include:
1.
Access and escape route.
2.
Air conditioning / ventilation and user controls.
3.
Switched lighting to include room light and reading light.
4.
Hot and cold water where wash basins are provided.
5.
Switched power sockets (ships services and personal use, see
Clause 22.7.
6.
Ship’s main communication network connection.
7.
Telephone connection point.
8.
IT terminal connection points.
All sleeping cabins shall be fitted out as follows:
1.
Floor covering to comply with the MDS.
2.
Decoration and finish to comply with the MDS.
3.
Washbasin and stand to be fitted as specified at Table 2 for large and
medium sized surface warships, Table 3 for small surface warships and
Table 4 for submarines.
4.
Fully furnished to the level specified at Clause 21.1.2 for large and
medium-sized surface warships, Clause 21.3.3 for small surface
warships and Clause 21.4.4 for submarines.
5.
All portable furniture shall be capable of being stowed or secured for
sea, action and noise husbandry.
52
SECTION 5
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
23.2.2 Dining areas
a.
b.
c.
d.
Dining areas shall be designed to provide an integrated galley, servery and
dining area. The transportation of meals from preparation area to eating area
shall be contained within the integrated area.
Dining facilities shall provide the space allocation for dining areas as
specified at Table 2 for large and medium sized surface warships, Table 3 for
small surface warships and Table 4 for submarines and the seating capability
at Clause 12.10.1f for surface warships, and Clause 21.4.3 for submarines.
Additional fixed and portable dining room furniture shall be provided as
specified by the Prime Contractor.
Pantry facilities for the preparation of snack food shall be included as a
service available to all members of the ship’s complement. These facilities
shall provide the means for preparing hot and cold drinks and snacks.
23.2.3 Recreation spaces
a.
b.
c.
d.
e.
f.
23.3
The design and layout of recreation spaces shall provide suitable functionality
for a range of activities that include TV viewing, group and individual
activities.
Seating for each recreation space shall be provided with a capability as
specified at Clause 12.10.1.f. for surface warships, and Clause 21.4.3 for
submarines.
Portable and fixed tables and chairs shall be provided.
Cupboards, TV stands and other items of fixed and portable furniture shall be
provided.
Full bar facilities shall be provided in Officer and Senior Rating recreation
spaces. Suitable bar facilities for dispensing soft drinks and controlled
alcoholic beverage allowances shall be provided in Junior Rating recreation
spaces.
Drinking water and ice making machines shall be provided in all recreation
spaces (see Clause 22.3).
Group-related design requirements
23.3.1 Communication
a.
b.
c.
Personal communication connections to the ship’s IT system shall be
provided for each member of the ship’s complement.
Hard-wired telephones connected to the ship’s automatic exchange shall be
fitted in the following spaces:
1.
Flag Officer/Commanding Officer day rooms with extension in sleeping
cabin.
2.
All other sleeping cabins.
3.
All dining rooms.
4.
All recreation spaces.
Hard-wired telephones shall have the capability for both ship internal and
external connection.
53
DEF STAN 02-107/ ISSUE 2
SECTION 5
d.
e.
Main broadcast and SRE loudspeakers shall be installed. These units are to
be fitted in apartments, suites, cabins, wardrooms, anterooms, SR and JR
recreation spaces and dining halls.
Additionally, main broadcast
loudspeakers are to be fitted in cabin flats and passageways. Where SRE
loudspeakers are fitted in compartments with TV facilities, the control unit
for the SRE loudspeaker is to be sited on a convenient bulkhead adjacent to
the TV position.
Push and buzzer units are to be fitted where a call service is required. The
Design Authority shall identify the need for these units.
24
MATERIEL
24.1
Timber
a.
b.
24.2
It is Government policy that all tropical hardwoods used in the construction
and repair of HM Ships are obtained from a sustainable source. It shall be a
condition of Contract that a Certificate of Compliance is provided by
Contractors to the Design Authority for every Contract awarded for the
supply of tropical hardwood.
The Design Authority shall be responsible for the specification and approval
of timber that is suitable for use on ships and/or submarines.
Composite materials
a.
24.3
DESIGN REQUIREMENTS / GUIDANCE
The Design Authority shall be responsible for the specification and approval
of Decorative Linings and Composite Bulkheads that are suitable for use on
ships and/or submarines.
Paint
a.
b.
c.
Painting of internal compartments shall be in accordance with the ship’s
painting schedule and manufacturer’s data sheets.
All exposed surfaces which are to be painted, shall be painted in accordance
with the MDS. In areas where the floor covering does not completely cover
the deck, e.g. at the ship’s side in unlined compartments, the space between
the outer edge of the floor covering and the ‘vertical’ structure is to be
painted in a colour to match the floor covering.
Where hatch coamings are sited in accommodation spaces, including
passageways and lobbies, the coamings are to be painted in accordance with
the ship painting schedule.
54
SECTION 5
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
25
INSTALLATION
25.1
Maintainability
a.
25.2
All furniture and fittings in accommodation compartments and any structures
necessary for supporting them shall be so arranged and installed in a manner
which takes full account of the requirements for safety, cleaning,
preservation, servicing and maintenance in accordance with good ship
husbandry practice.
Fasteners
a.
25.3
Bulkhead mounting
a.
25.4
Metric fasteners shall to be used for securing equipment and fittings.
Bulkhead-mounted fittings shall be adequately supported by lugs or brackets
secured to the bulkhead structure. Keyhole-type lugs shall not be used.
Electrical fittings
25.4.1 Lighting fittings
a.
b.
Lighting fittings and switches are to be installed in accordance with the
requirements for the ships domestic electrical services.
EMC requirements are to comply with the overall ship requirements for
EMC.
25.4.2 Switched power sockets
a.
b.
The surface mounted sockets are to be used in unlined accommodation
compartments and flush mounted sockets are to be used in lined
compartments only.
Where required an aerial socket is to be provided adjacent to the power
socket.
25.4.3 Earthing arrangements
a.
Earthing arrangements shall be provided for all fixed and portable electrical
apparatus used in accommodation spaces. The Design Authority shall be
responsible for the specification of earthing arrangements.
25.4.4 Electrical warnings
a.
b.
Warning labels shall be fitted to electrical equipment and applicable fittings.
Each socket outlet is to be provided with a label to indicate the maximum
power available and the largest fuse permissible in the plug (normally 3A).
25.4.5 Stowage of electrical equipment
55
DEF STAN 02-107/ ISSUE 2
SECTION 5
a.
b.
25.5
Stowages for portable electrical equipment shall be provided.
Portable electrical equipment that contains heating elements (such as irons or
kettles) shall be sited at a distance from the provided switch socket, such that
the iron or kettle cannot be stowed while connected to the electrical supply.
Pipe work and associated fittings
a.
Pipe work and associated fittings in accommodation spaces is to comply with
the following requirements.
1.
Unless otherwise stated all pipes and associated fittings shall conform
to the overall ship requirements for pipe work.
2.
Flexible pipe assemblies shall be in accordance with the overall ship
requirements for flexible pipes.
3.
Pipe work shall be routed as directly as possible with the minimum of
bends. All pipe work shall be readily accessible and be arranged so that
it is clear of the foot of bulkheads, does not restrict headroom and does
not create inaccessible dirt traps.
26
FINISH
26.1
Master Décor Scheme
a.
26.2
DESIGN REQUIREMENTS / GUIDANCE
The MDS shall be agreed by representatives from the Design Authority, ship
builder, ships staff hierarchical group representatives (Officer, Senior Rating
and Junior Rating), DPA/Warship Project Manager and other interested
parties from the DPA. The MDS shall include provision for the following
key activities:
1.
Identify key personnel/organisations (MDS Stakeholders).
2.
Identify procedures to vary the MDS within a class of ship/submarine.
3.
Identify procedures to change the MDS within a class of ship/submarine
at refits and/or other key milestones.
4.
Specify the compartments that are covered by the MDS.
5.
Identify approved materials and equipment.
6.
Provide detailed tables containing the selected material and colour for
each area, or item of furniture and associated equipment.
Painting and preservation
a.
b.
c.
Sleeping cabins, dining rooms, recreation spaces, toilets, lobbies and
passageways are to be painted in accordance with the requirements for the
preservation and painting of surface ship dry compartments specified in the
ship’s painting schedule and associated manufacturer’s data sheets.
Bathrooms are to be painted in accordance with the requirements for the
preservation and painting of surface ship wet compartments specified in the
ship’s painting schedule and associated manufacturer’s data sheets.
Preservation of structure and painting of compartments and pipe work in
submarines shall be in accordance with the requirements in the ship’s
painting schedule and associated manufacturer’s data sheets.
56
SECTION 5
d.
e.
26.3
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
Sleeping cabin, dining room, recreation space furniture and associated fittings
are to be painted in accordance with the requirements set out in the
specification for manufacture and paint finishing of the particular item.
Pipe and ventilation systems in surface ships shall be colour coded in
accordance with the surface ship and submarine painting schedule.
Insulation
26.3.1 Acoustic insulation
a.
b.
Bulkhead acoustic absorption or insulation treatment shall be applied to
bulkheads which separate accommodation spaces from other parts of the ship
to minimize:
1.
Interference with internal communications in living spaces.
2.
Unacceptable noise levels in recreation and rest spaces.
3.
Underwater noise transmitted from the ship’s structure.
4.
Noise transmitted via ventilation and air conditioning systems serving
accommodation compartments.
The application of both acoustic absorption treatment or acoustic insulation
treatment or a combination of both shall be used to achieve maximum
effectiveness.
26.3.2 Thermal insulation
a.
b.
c.
d.
e.
All accommodation space boundaries exposed to the sea or weather shall be
thermal insulated. Insulation is not to be fitted where it will itself be exposed
to weather.
Insulation in wet areas is not to be extended down into sumps and savealls.
Thermal insulation is to be applied to cold fresh water piping where it passes
through accommodation spaces.
Thermal insulation is to be applied to hot fresh water piping with the
exception of that stated in the following sub-clauses.
1.
Fresh water piping on the surface of the lining in cabins, wash places
and showers is not to be insulated.
2.
In submarines, piping behind linings is not to be insulated.
Where it is necessary to run steam pipes or hot water pipes through
accommodation spaces, they shall be efficiently lagged wherever necessary
for the protection of personnel against injury or discomfort.
57
DEF STAN 02-107/ ISSUE 2
SECTION 5
DESIGN REQUIREMENTS / GUIDANCE
26.3.3 Acoustic and thermal insulation
a.
26.4
In compartments which require both thermal and acoustic insulation on a
common boundary, Mineral Fibre Marine Board (MFMB) of adequate
thickness to meet the greater requirement is to be fitted.
Deck coverings
a.
b.
c.
d.
e.
f.
g.
All decks in accommodation spaces shall be covered with approved
coverings. Responsibility for the specification and approval of deck
coverings shall rest with the Design Authority.
Exposed decks of all ‘living’ spaces, including adjacent passageways and
lobbies, are to be covered with an approved floor covering to the colour
determined by the MDS.
Exposed boundaries of accommodation compartments are to be fitted with a
coving secured by adhesive to the bulkhead and deck. Approved floor
covering is not required in areas where carpet is specified, except on deck
areas in way of Emergency Operating Stations.
A suitable deck covering shall be provided in the following accommodation
spaces, in accordance with the MDS:
1.
Apartments.
2.
Cabin suites.
3.
Sleeping cabins.
4.
Wardrooms.
5.
Ante-rooms.
6.
Dining rooms
7.
Recreation spaces.
8.
Miscellaneous spaces.
Carpeted spaces which can be subjected to heavy traffic, wet spillage and
heavy wear are typically: common walkways from/to entry and exit points;
areas where queues form, areas in front of food serveries, bars, drinks
dispensing facilities. In these areas the carpet is to be substituted with a heavy
duty EPDM type material, coloured in accordance with the MDS. A suitable
edge strip is to be fitted at the interface of the carpet and EPDM type material
when this is specified.
Fully vitrified tiles, which are impervious to water, are to be laid on the decks
of surface ship ‘wet’ compartments such as bathrooms and toilets. The
vertical boundaries of the tiled area are to be fitted with black rounded top
coving tiles.
Commercial mosaic clay tiles are to be used to cover bathroom and toilet
decks in submarines.
58
SECTION 5
DEF STAN 02-107/ ISSUE 2
DESIGN REQUIREMENTS / GUIDANCE
26.4.1 Tread mats
a.
Non-slip tread mats are to be fitted in positions subjected to heavy wear as
follows:
1.
Recreation spaces
outside doorways
2.
Dining Rooms
outside doorways
3.
Bathrooms
outside doorways
4.
Toilets
outside doorways
5.
Ladders
top and bottom
6.
Weather deck doors
inside opening
7.
Internal watertight
both sides
59
DEF STAN 02-107/ ISSUE 2
SECTION 5
DESIGN REQUIREMENTS / GUIDANCE
60
DEF STAN 02-107/ ISSUE 2
ANNEX A
A.1
RELATED DOCUMENTS
List of related documents used in this standard
Designation
Title
BR 2
QR(RN) Queen’s Regulations (Royal Navy)
JSP 375
Guide to Safety Instructions Relating to Health & Safety at Work
Act 1974
JSP 430
Ship Safety Management System
DEF STAN 00-25
Human Factors for Design of Equipment
DEF STAN 00-35
Environmental Handbook for Defence Materials
DEF STAN 02-120
Requirements for WCs, Urinals, Bathrooms and Washing Facilities
DEF STAN 02-121
Requirements for Galleys and Associated Spaces
DEF STAN 02-123
Requirements for Laundries and Associated Compartments
Part 2
DEF STAN 02-130
Laundry Machinery, Equipment and Fittings
Category 2
Requirements for Decorative Linings and Composite Bulkheads
Part 1
Decorative Linings Category 2
Part 2
Composite Bulkheads Category 2
DEF STAN 02-149
Access Policy in Surface Ships
DEF STAN 07-247
Selection of Materials on the Basis of their Fire Characteristics
DEF STAN 08-50
Design requirements for the installation of TEMPEST designated
equipment in ships and submarines.
INM Report
INM Report No 96045, dated Nov 1996
61
DEF STAN 02-107/ ISSUE 2
ANNEX B
B.1
DEFINITIONS AND ABBREVIATIONS
For the purpose of this standard the following definitions apply:
Statement
Definition
Large surface
warship
Defined as HM Surface Warships with a ship’s complement in
excess of 400 (typically aircraft carriers, LPDR and LPH).
Medium-sized
surface warship
Defined as HM Surface Warships with a ship’s complement ranging
from 50 to 400 (typically Type 42, Type 22, Type 23, Endurance,
Herald and Scott).
Small surface
warships
Defined as HM Surface Warships with a ships complement less than
50 (typically Hunt/Sandown MCMVs, and Castle/Island OPVs).
Submarines
Defined as HM Submarines including SSBN, SSN and SSK
(typically with a complement less than 150).
Ship’s complement
hierarchical groups
Defined as the three main generic groups forming the ship’s
complement, these are Officers, Senior Ratings and Junior Ratings.
Officers
Generic group of the ship’s complement, which for the purposes of
this standard includes all Commissioned Officers and Mid-Shipmen.
Senior Ratings
Generic group of the ship’s complement, which for the purposes of
this standard includes Warrant Officers and Non-Commissioned
Officers (Chief Petty Officers / Petty Officers) and their tri-service
equivalents.
Junior Ratings
Generic group of the ship’s complement, which includes all other
ranks (Leading Hands, Able-Bodied Seamen and Ordinary Seamen)
and their tri-service equivalents.
Senior CPOs
Are defined as Charge Chief Petty Officers, Master at Arms,
Coxswains charged with the management, administration and
supervision of tasks involving the ship’s complement.
Embarked Military
Forces
Defined as a military task force comprising Royal Marine, and/or
Army, and/or RAF, and/or Royal Naval personnel. Typically
Embarked Military Forces can be a small unit of 10 persons to a
large military detachment of up to 250 persons.
SRD/URD
Defined as the suite of documents developed under the UK
Government Smart Procurement Initiative and includes all user and
system requirements documents and specifications.
Primary
Accommodation
Defined as the accommodation on HM Ships and Submarines for the
use of the specified ship’s complement including margins.
Secondary
Accommodation
Defined as additional accommodation required on HM Surface Ships
for the transport and accommodation chiefly of embarked military
forces.
Accommodation flat
A common enclosed accommodation area/passageway providing
access to sleeping cabins, toilets and bathrooms/shower units.
62
DEF STAN 02-107/ ISSUE 2
ANNEX B
B.2
ABBREVIATIONS AND DEFINITIONS
The following abbreviations are used in this standard
Designation
Title
AGR
Anti Gas Respirator
BR
Book of Reference
BS
British Standard
CCPO
Charge Chief Petty Officer
CD ROM
Compact Disc Read Only Memory
CO
Commanding Officer
CPO
Chief Petty Officer
CTG
Commander Task Group
CTU
Commander Task Unit
Def Stan
Defence Standard
DLO
Defence Logistics Organisation
DMSC
Defence Materiel Standardization Committee
DPA
Defence Procurement Agency
DStan
Directorate of Standardization
DVD
Digital Video Disc
EBS
Emergency Breathing System
EMC
Electro-Magnetic Compatibility
EPDM
Ethylene Propylene Diene Monomer (a thermoplastic rubber)
FO
Flag Officer
FW
Fresh Water
HoD
Head of Department
ILS
Integrated Logistic Support
IT
Information Technology
INM
Institute of Naval Medicine
JR
Junior Rating
LAN
Local Area Network
Lt
Lieutenant
Lt Cdr
Lieutenant Commander
63
DEF STAN 02-107/ ISSUE 2
ANNEX B
DEFINITIONS AND ABBREVIATIONS
B.2 (continued)
Designation
Title
MDS
Master Décor Scheme
MFMB
Mineral Fibre Marine Board
MOD
Ministry of Defence
NATO
North Atlantic Treaty Organisation
NCO
Non-Commissioned Officer
NES
Naval Engineering Standard
OC
Operational Commander
PO
Petty Officer
QR(RN)
Queen’s Regulations (Royal Navy)
RSM
Regimental Sergeant Major
RU
Ready-Use
SB
Shipbuilder
SPI
Smart Procurement Initiative
SR
Senior Rating
SRD
System Requirements Document
SRE
Sound Reproduction Equipment
SSBN
Submarine Submerged Ballistic Nuclear
SSN
Submarine Submerged Nuclear
SSK
Submarine Submerged Conventional
STG
Sea Technology Group
Sub Lt
Sub Lieutenant
TV
Television
UK
United Kingdom
URD
User Requirements Decument
VCR
Video Cassette Recorder
WC
Water Closet
WO
Warrant Officer
64
ANNEX C
DEF STAN 02-107/ ISSUE 2
ANTHROPOMETRICS MEASUREMENT
C.1 Anthropometrics Measurement
This Annex contains extracts from INM Technical Report No 96045 - Bunk Spaces - A
review of previous work & recommendations for future design, issued in November 1996.
This report is a review of the Institute of Naval Medicine’s previous considerations of bunk
dimensions for Royal Naval personnel and a summary of its recommendations.
C.2 Summary of the Report recommendations
a.
b.
c.
d.
Bunk length should be 2087mm (2038mm minimum).
Bunk width should be 859mm (816mm minimum).
Vertical bunk separation should be 1015mm (991mm minimum).
Horizontal bunk separation should be 800mm (minimum).
C.3 Summary of the Report rationale
a.
b.
c.
d.
e.
INM undertook to ‘Review the bunk spaces studies carried out by INM and
make recommendations’.
These studies consisted of loose minutes to DGSS over the period 1989 to
1993. The review took cognisance of the relevant communications in
chronological order so as to determine any historical development.
The most important development which took place in that period, and which
had a significant influence on recommendations for bunk design, was the
publication of a further INM Report (INM Report No 18/90, An
Anthropometric Survey of 1333 Royal Naval Personnel 1986-1990). This
report provided a solid basis of body dimensions for the user population,
around which equipment and clothing has since been designed.
Past considerations surrounding the degree of comfort to be provided by an
individual’s bunk space have included not only the percentage of the size
range of the user population, but also the range of activities to be
accommodated in addition to sleeping, i.e. resting, reading (whilst sitting up),
writing, dressing, and so on, as well as the allowances which could be made
for different sleeping postures.
Each of these bunk space studies was reviewed in turn and the
recommendations summarised as at Clause C.2 above.
C.4 Recommendations for future design
The following recommendations are based on data from the INM anthropometrics
survey of male Royal Navy personnel, published in October 1990. To the basic
measurements are added appropriate adjustments in order to arrive at the
recommended dimensions. Earlier recommendations were based on 95%-ile
measurements; however, as the figure implies, a 95%-ile measurement excludes 5 in
every 100 personnel. It is strongly recommended, therefore, that attempts be made
to accommodate 99% of the user population where possible.
Recommended bunk sizes are given in Table C.1 and Table C.2 below.
65
DEF STAN 02-107/ ISSUE 2
ANNEX C
ANTHROPOMETRICS MEASUREMENT
Table C.1. Bunk Length (mm)
Minimum
95%-ile
1870
Ideal
99%-ile
1919
= 1998
= 2038
= 2047
= 2087
Minimum
95%-ile
530
Ideal
99%-ile
558
+304
= 834
= 862
=6
= 810
= 816
= 853
= 859
Basis
Stature – INM Survey 1990
Adjustments
+128
= 40
Hands above head & tuck
Secular (1990 – 2030) @ +1 per annum
Table C.2. Bunk Width (mm)
Basis
Bidetoid – INM Survey 1990
Adjustments
Arms and curling (largest) (INM Report
No 18/90)
Or +(%-ile x 304/575) in proportion
Secular (1990 – 2030) @ +0.15 per annum
The recommended vertical and horizontal bunk separation distances are given at subparagraphs C.4.1 and C.4.2.
C.4.1
Vertical bunk separation (in mm)
a.
b.
c.
It is recommended that the vertical distance between top of mattress and
underside of bunk or other obstacle above the bunk should be sufficient to
allow the occupants of the bunks to sit upright.
The INM Survey ’90 gives sitting height as 981mm for 95%-ile and 1005mm
for 99%-ile. To these values should be added 10mm for head clearance and,
say, half the secular allowance for the full body length, i.e. 20 mm between
1990 and 2030. On the other hand, allowance can be made for the
compression of the mattress under the occupant, say 20 mm.
After all the allowances are taken into account, the following
recommendation emerges:
Table 3. Recommendations with allowances taken into account
Vertical separation (mm)
C.4.2
Minimum
95%-ile
991
Horizontal bunk separation
The recommended horizontal bunk separation is 800mm.
66
Ideal
99%-ile
1015
DEF STAN 02-107/ ISSUE 2
TYPICAL INVENTORIES OF FURNITURE AND FITTINGS FOR PRIMARY
ACCOMMODATION SPACES
Sections D.1 to D.11 provide guidance on the type of furniture required in the various
accommodation space configurations. It is emphasised that the information provided in this
Annex is guidance information to give designers and suppliers of furniture an insight to the
aspirations of future users in order to assist in the development of proposals that provide
best solutions in meeting the needs of future ship’s complement personnel.
D.1 Typical requirements for outfitting Flag Officer/CTG and Commanding Officer
accommodation areas
a.
b.
c.
d.
e.
f.
Accommodation for Flag Officer/CTG and Commanding Officers is to be
arranged such that each dedicated space is accessible from a common lobby.
The accommodation is to be fitted out with modular furniture items finished
to a high quality with natural wood effect material. The accommodation is to
provide the occupant with facilities to carry out the business of Task
Force/Ship management, including official entertaining, and to provide a high
standard of personal comfort appropriate to the rank of the occupant.
Furniture items are to be fitted in sleeping cabins to provide a sleeping berth
and hanging and stowage spaces for clothing and kit, with some of the units
arranged to form a dressing unit.
The day/dining area is to be fitted out to provide office, dining and relaxation
facilities. The dining area is to be partitioned from the relaxation area using
curtains or a permanent partition incorporating a communicating door. The
dining area is to include a stewards access door to a pantry. The furniture is
to include a table and chairs, sideboard, servery to pantry.
The pantry is to be fitted out as a mini fitted high quality domestic kitchen
with a sink unit and draining board, domestic dishwasher, refrigerator/freezer,
facilities for food warming/heating, facilities for dispensing hot and cold
drinks, cupboard for dry food storage, cupboards for cutlery and
tableware/linen, cupboard for stowage of crockery, cleaning locker, garbage
disposal unit.
The relaxation area is to be furnished with a combination of easy chairs and
settee modules, general purpose storage cupboards with polished sideboard
tops and spaces for TV, VCR and music centre. One cupboard unit is to be
fitted out for the temporary stowage of bottles and glasses with a top suitable
for dispensing alcoholic beverages.
The office area is to comprise a desk unit with computer terminal facility, a
desk chair, a security combination safe, bookshelves.
The ship’s
communications equipment shall be located within easy reach of the desk
chair position.
67
DEF STAN 02-107/ ISSUE 2
D.2 Typical inventory of furniture for outfitting HoD sleeping cabin
a.
Two cap/coat hooks
k.
One lighting fixture
b.
One settee/bunk
l.
One desk unit / computer stowage
c.
One bedside shelf
m. Lateral filing unit with drawer
d.
One cupboard unit
n.
Three shelves / filing tray rack
e.
One suit cupboard
o.
One dining chair without arms
f.
Two miscellaneous stowage units
p.
One folding armchair
g.
Three drawer unit
q.
One waste paper bin
h.
One sideboard top to cover units
r.
Two towel rails
i.
One wardrobe unit with full mirror
s.
One security container
j.
Pedestal unit with drawer
t.
One money safe (Supply Officers)
D.3 Typical inventory of furniture for outfitting other Officers, single-berth cabins
The number of items for other Officer double-berth cabins are indicated in brackets.
a.
Two cap/coat hooks
k.
Lateral filing unit with drawer (2)
b.
One single bunk (2)
l.
One lighting fixture (2)
c.
One bedside shelf (2)
m. One folding armchair (2)
d.
One cupboard unit (2)
n.
One washbasin
e.
One suit cupboard (2)
o.
One washbasin support
f.
Three drawer unit (2)
p.
Amenity panel with shaving socket
g.
One sideboard top to cover units
q.
One waste paper bin
h.
One wardrobe unit / full mirror (2)
r.
Two towel rails
i.
One desk unit / computer stowage
s.
One security container
j.
Secretaire (2)
t.
In double berth cabins privacy
screening shall be fitted to each bunk
68
DEF STAN 02-107/ ISSUE 2
D.4 Typical inventory of furniture for outfitting Warrant Officer and Senior CPO
single-berth cabins
a.
At least one cap/coat hook
i.
Secretaire
b.
One bunk
j.
One lighting fixture
c.
One cupboard unit
k
One folding armchair
d.
One suit cupboard
l.
One washbasin
e
Three drawer unit
m. One washbasin support
f.
Top over units
n.
Amenity panel with shaving socket
g.
One wardrobe unit with mirror
o.
One waste paper bin
h.
One desk unit and computer stowage
p.
One towel rail
D.5 Typical inventory of furniture for outfitting Senior Rating double-berth cabins
a.
Two cap/coat hooks
i.
One desk unit and computer stand
b.
Two single bunks with privacy curtain
fitted to each bunk
j
Two folding armchair
c.
Two bunk side shelves
k.
Two folding stools
d.
Two suit cupboards
l.
One washbasin
e
Two wardrobe units with mirrors
m. One washbasin support
f.
Four general-purpose drawers
n.
Amenity panel with shaving socket
g.
Two shoe lockers
o.
One waste paper bin
h.
Top over units
p.
Two towel rails
69
DEF STAN 02-107/ ISSUE 2
D.6 Typical inventory of furniture for outfitting Junior Rating four-berth cabins
a.
Four cap/coat hooks
h.
One desk unit and computer stowage
b.
Two x 2-tier bunks with privacy curtain
fitted to each bunk
i.
Two folding armchairs
c.
Four bunk side shelves
j
Two folding stools
d.
Two suit cupboards
k.
Four towel rails
e
Two wardrobe units with mirror
f.
Four under-bunk drawers
g.
Four shoe lockers
D.7 Typical inventory of furniture for outfitting Officer dining areas (Wardroom)
Dining area
a.
Dining tables seating 100% Officers
d.
Wine cupboard
b.
Dining chairs for 100% Officers
e.
Hot and cold drinks dispenser unit
c.
Buffet/sideboard units
f.
Servery to pantry
Manned pantry area
(the pantry will be mainly used by professional stewards, with a
lesser degree of self help use)
a.
Sink unit and draining boards
g.
Domestic refrigerator/freezer
b.
Crockery stowage cupboards
h.
Food heating appliances and toaster
c.
Cutlery stowage drawers
i.
Water heater for hot drinks
d.
Tablemats/condiment cupboard
j.
Domestic dishwasher
e.
Table linen cupboard
k.
Cleaning locker
f.
Dry food storage cupboard
l.
Garbage disposal arrangements
70
DEF STAN 02-107/ ISSUE 2
D.8 Typical inventory of furniture for outfitting Officer recreation areas
(Wardroom/Anteroom)
Seating leisure area (seating to be provided for 90% of complemented officers)
a.
Upholstered fitted seating
f.
Coffee/occasional tables
b.
Upholstered armchairs/chairs
g.
Card tables
c.
Cupboard and drawer units
h.
Magazine/paper racks
d.
Notice board
i.
Mail rack
e.
TV/radio/music centre
Fitted bar facility
a.
Sink unit
h.
Spirits cupboard (lockable)
b.
Glass washing appliance
i.
Wine locker (lockable)
c.
Domestic refrigerator
j.
Beer dispensing facility
d.
Cold shelf and cold cupboard
k.
Tinned beer cupboard
e.
Ice making machine
l.
Soft drinks cupboard
f.
Cupboard for glassware
m. Lockable security grill
g.
Cupboard for bar accessories
D.9 Typical inventory of furniture for outfitting Senior Rating dining room
a.
Dining tables seating 80% SRs
e.
Hot and cold drinks dispenser unit
b.
Dining chairs for 80% SRs
f.
Dirty crockery/cutlery return point
c.
Buffet / sideboard unit
g.
Refrigerator for jams, sauces etc.
d.
Clean cutlery collection point
71
DEF STAN 02-107/ ISSUE 2
D.10 Typical inventory of furniture for outfitting Senior Rating recreation area
Seating / leisure area (seating to be provided for 80% of complemented SRs)
a.
Upholstered fitted seating
f.
Coffee/Occasional tables
b.
Upholstered armchairs/chairs
g.
Card tables
c.
Cupboard and drawer units
h.
Magazine/paper racks
d.
Notice board
i.
Mail rack
e.
TV/radio/music centre
Fitted bar facility
a.
Sink unit
g.
Cupboard for bar accessories
b.
Glass washing appliance
h.
Spirits cupboard (lockable)
c.
Domestic refrigerator
i.
Beer dispensing facility
d.
Cold shelf and cold cupboard
j.
Soft drinks cupboard
e.
Ice making machine
k.
Lockable security grill
f.
Cupboard for glassware
Pantry area (the pantry will mainly be a self help facility with messman assistance)
a.
Sink unit and draining board
i.
Food heating appliances and toaster
b.
Crockery stowage cupboard
j.
Water heater for hot drinks
c.
Cutlery stowage drawers
k.
Domestic dishwasher
f.
Dry food storage cupboard
l.
Cleaning locker
g.
Condiment locker
m. Garbage disposal arrangements
h.
Domestic refrigerator/freezer
D.11 Typical inventory of furniture for outfitting Junior Rating dining room
a.
Dining tables seating 50% JRs
e.
Hot and cold drinks dispenser units
b.
Dining chairs for 50% JRs
f.
Dirty crockery/cutlery return point
72
DEF STAN 02-107/ ISSUE 2
c.
Buffet/sideboard units
d.
Clean cutlery collection point
g.
73
Refrigerator for jams, sauces etc.
DEF STAN 02-107/ ISSUE 2
D.12 Typical inventory of furniture for outfitting Junior Rating recreation area
Seating / leisure area (seating to be provided for 70% of complemented JRs)
a.
Upholstered fitted seating
e.
Occasional tables
b.
Upholstered armchairs/chairs
f.
Card tables
c.
Cupboard and drawer units
g.
Magazine/paper racks
d.
TV/radio/music centre
h.
Notice board
Pantry area
(the pantry will be a self-help facility)
a.
Sink unit and draining board
g.
Cold drinks dispensing facility
b.
Crockery stowage cupboard
h.
Food heating appliances and toaster
c.
Cutlery stowage drawers
i.
Water heater for hot drinks
d.
Dry food storage cupboard
j.
Domestic dishwasher
e.
Condiment locker
k.
Cleaning locker
f.
Domestic refrigerator/freezer
l.
Garbage disposal arrangements
74
Inside Rear Cover
© Crown Copyright 2002
Copying Only as Agreed with DStan
Defence Standards are Published by and Obtainable from:
Defence Procurement Agency
An Executive Agency of The Ministry of Defence
UK Defence Standardization
Kentigern House
65 Brown Street
GLASGOW G2 8EX
DStan Helpdesk
Tel 0141 224 2531/2
Fax 0141 224 2503
Internet e-mail enquiries@dstan.mod.uk
File Reference
The DStan file reference relating to work on this standard is D/DStan/069/02/107.
Contract Requirements
When Defence Standards are incorporated into contracts users are responsible for their correct
application and for complying with contractual and statutory requirements. Compliance with
a Defence Standard does not in itself confer immunity from legal obligations.
Revision of Defence Standards
Defence Standards are revised as necessary by up issue or amendment. It is important that
users of Defence Standards should ascertain that they are in possession of the latest issue or
amendment. Information on all Defence Standards is contained in Def Stan 00-00 Standards
for Defence Part 3 , Index of Standards for Defence Procurement Section 4 ‘Index of Defence
Standards and Defence Specifications’ published annually and supplemented regularly by
Standards in Defence News (SID News). Any person who, when making use of a Defence
Standard encounters an inaccuracy or ambiguity is requested to notify the Directorate of
Standardization (DStan) without delay in order that the matter may be investigated and
appropriate action taken.
Download
Study collections