Uploaded by cortecmeuae

Learn How To Use Our Rust Removal

Learn How To Use Our Rust Removal
 Steel is one of the most wildly used materials in the modern
industry – mainly because it is versatile, durable, and affordable.
The reason is that one of the key raw materials of this alloy is iron,
which oxidizes due to the impact of the air and the humidity. This
brings us to the need for rust proving structures and metals.
Rustproofing is the process of treatment of iron and steel objects
to prevent rusting or decaying or the permanent protection against
 Rust removal with Cortec’s bio-based rust removers is easy and
safer than many other rust removal chemicals on the market,
thanks to the lower acidity and higher percentage of common food
industry ingredients in VpCI®-422 and VpCI®-423. These are great
items to have on hand for your maintenance teams to do a quick
touch-up of a few rusty spots here and there or restore rusty spare
parts. Simply follow these five easy steps:
1. Apply VpCI®-422 or VpCI®-423 by spray, brush, dip, or squeeze bottle.
2. Allow sitting for 15 minutes to one hour,* depending on the severity
of rust.
3. Wipe off the rust and the rust remover, using a basic scrub pad for
light abrasion if desired.
4. Rinse with an alkaline cleaner solution such as VpCI®-414, VpCI®-416,
or VpCI®-418 LM (diluted up to 5% in water) to remove residue and
provide flash rust protection.
5. Repeat if needed.
For more details:Tel: +971 4 434 0669 FAX :+971 4 434 0668
EMAIL ID :- inquiries@cortec-me.com
Cortec® Middle East
Sidra Tower, Office 1307
Sheikh Zayed Road
P.O. Box 115133
Dubai, United Arab Emirates