TO FIND RALT
rlmbp:id=all;
rlmtp:id=all,cell=46481;
rlmbi:id=50,code=34,gs=3,lang=1,NUMPAGES=1,MODE=MML;
RLMBI:ID=50,CODE=34,GS=3,CELL=46481;
RLMBC:ID=50,CODE=34,GS=3,TEXT="HABTOOR GRAND RESORT & SPA";
RLMTI:ID=50,CODE=34,GS=3,REP=60;
RLMTP:ID=ALL,CELL=46481;
RLMBE:CELL=46481,ID=50,CODE=21,GS=3;
.............................................................
RLUMC:CELL=11181,ADD/"REM",UMFI=10612-405-NODIV;
RLNRI/"E":CELL=11181,CELLR=U28272,SINGLE;
..................................................
OSF-Report
directory:/home/cfd/om
.....................................................
STDEP:DEV=RBLT-673;
BLODI:DEV=RBLT-673;
##cna export##
cna_export NW=AXE, MSC=all, MSC_REF=none, BSC=all, BSC_REF=none,
SITE=all,SITE_REF=none, CELL=all, CELL_REF=bsic_bcch_lac,
OUTPUT=st2
.......................................................................
###CBC Definition####
rlmtp:id=all
rlmbp:id=all,cell=all
rlmbi:cell=1234,id=50,code=1,gs=3,mode=mml
rlmbc:cell=1234,id=50,code=1,gs=3,text="mahmood"
rlmti:id=50,code=1,gs=3,rep=60
rlmbe:cell=1234,id=50,code=1,gs=3
rlmte:id=50,code=1,gs=3
........................................................................
Repei:emg=sabkhatalhairya,str=a;
remei:emg=sabkhatalhairya,pcb=strp,mag=str-a;
recei:emg=sabkhatalhairya,str=a;
.......................................................................
EXRPP:RP=ALL TO PRINT ALL RP DEV
repri:rp=106;
remri:rp=106,pcb=RPPS1;
recri:rp=106;
.........................................................................
RXMSP:MO=RXOTRX-27-0&&-11;
RXMFP:MO=RXOCF-21;
RXELP:MO=RXOTG-27;
.........................................................................
.
RLSTP:CELL=ALL,STATE=HALTED;
.........................................................................
..
IMLIT:SPG=0
SDTDP:RPTID=132,INT=15,OBJTYPE=CLSDCCH,OBJ=CELL ID
SDTDP:RPTID=130,INT=15,OBJTYPE=CELTCHF,OBJ=CELL ID
END
.........................................................................
.
RXMSP:MO=RXOTRX-12-0&&-11;
.........................................................................
.
TO CHECK ALL STATE SD TCH SUC
IMLIT:SPG=0
SDTDP:INT=15,RPTID=230;
END
.....................................................
TCH
130
............................
SDDCH
132
.........................
HOW TO CHECK TCH SET+HO% AND THE CONG
IMLIT:SPG=0;
SDTDP:RPTID=130,INT=15,OBJTYPE=CELTCHF,OBJ=45022;
END;
.................................................................
FOR FORLOOP RELES
rxmop:mo=rxotg-;
syfri:fid=h'000-h'890,filenum=1,block=rxotgd,ind=tg#;
................................................................
NTCOP:SNT=ETRALT
STDEP:DEV=233&&3234;
.........................................................................
.......
HOW TO RESET THE LINK IN CASE OF NETWORK SYNCHRONIZATION FAULT?
EXSCP:NAME=ALL;
.............................................................
RP SUPRATION:
.................................................................
RXMDP:MO=RXOTRX-TG-0&&-11;
RADRP:DEV=RHDEV-#;
FCRWS:RP=23,WS=SEP;
SELECT RP ONE BY ONE IF MORE THAN ONE RP
BLRPE:RP=23;
TO DEBLOCK THE RB AND TRX WILL USE DIFFRENT DEV
.................................................................
TO CHECK UP LINK QUALITY
IMLIT:SPG=0;
SDTDP:RPTID=126,INT=1,PER=PREV;
END;
.........................................................................
......
TO CONNECT THE TG TO THE CELL
RXTCI:MO=RXOTG-#,CELL=43214,chgr=0;
RXTCE:MO=RXOTG-#,CELL=4342;
TO DISSCONNECT THE TG FROM CELL
........................................................................
GSSTP; TO CHECK THE TSM
........................................................................
RRGBP;
TO CHECK ALL GB LINK
RLGRP;
TO CHECK GB LINK IN THE CELL
........................................................................
RXPLI:MO=RXOTG-#,UC; TO RELOAD THE SOFT WARE
TO LOAD THE NEW SOFT WARE.....RXMSC:MO=RXOTG-71,SWVER=B1922R002H;
AFTER CHANGE WE SHOUD DO ....RXPLI:MO=RXOTG-#,UC;
.........................................................................
..
DTSTP:DIP=ALL; TO CHECK ALL DEVICE
BLODI: TO BLOCK THE DEVICE
.........................................................................
......
rxapp:mo=rxotg-; to check rblt dev which cell using
rxape:mo=rxotg-,dcp=; to delet the rblt dev
rxapi:mo=rxotg-,dcp=; to add the dev;
IN CASE OF COSENTRATION EVRY 3 TRU USE ONE DCP FOR SYNGRONYSATION AND
2D DCP FOR SPEECH .....WITH OUT COSENTRATION EACH TRU USE 3 DCP.EACH RBLT
HAVE 28 DCP
.........................................................................
...............
rxmoi:mo=rxotg-; to define
rxmoe:mo=rxotg-; to un define
.........................................................................
...................................
HOW TO TAKE BACKUP
SYBUE;
SYBUP:FILE;
SETUP 1 AT WILL TAKE AROUND 20 MIN AND WE WILL GET ON CHA
BACKUP INFORMATION OUT PUT EXECUTED
;
SYTUC;
SYBUI:DISC
SETUP 2 AT WILL TAKE 30 SECOND
.........................................................................
...................................
rxmsc:mo=rxotg-#,swver=b1921r0086; to change software version in case if
site on service after that we will do rxpli.
rxpli:mo=rxotg-#,uc; to load the software
.......................................................
rxmoc:mo=rxotg-#,swver=b1921r0086; we used in case if the site out of
service and no need to load the soft ware it will load when we deblock.
rxmoc:mo=rxocf-#,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-1-#,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-2,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-3,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-4,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-5,swver=b1921r0086 or default ;
....in service
....deblock
.........................................................................
..........................
rllhp:cell=33454; to check layerthreshod
.layerhyst.psstemp.ptimtemp.layer
rllhc:cell=4562,layerthrshod=45; this coomand to change all this
parametars
...................................................................
rlcpp:cell=; to print BSPWRB BSPWT MSTXPWR.
RLCPC:CELL=, BSPWT=12.....TO CHANGE THE PRAMETER
..................................................................
RLSSP:CELL= 21312; TO PRINT CCHPWR CRH DTXU
RLSSC:CELL= TO CHANGE THIS PARAMETER
......................................................................
RLMFP:CELL=32; TO CHECK THE ACTIVE AND IDEL LIST.
RLCFP:CELL= TO SEE THE FREQUNCY THAT CONNECTED TO THE CELL
rlccc:cell=4256,sdcch=2or3or4,chgr=0 or 1;
.........................................................................
.............
rlcfi:cell=4646,dchno=17; to add freqency
rlcfe:cell=4324,dchno=45; to delet frequency if more than on chanell
group we have to
to writ channel group no after frequency .
...................................................
GSSTP:TSM=12-B TO SEE THE STATE OF TSM
GSBLI:TSM=
TO BLOCK THE TSM
GSTEI:TSM= TO TEST THE TSM
GSBLE:TSM= TO DEBLOCK THE TSM
.........................................
to check the pannel with nark
to start allti:ali=0;
for end
allte:ali=0;
........................................
ntbli: to block the snt
ntble:to dblock the snt
stdep:dev=; to check the device
ntcop:snt= to print the dev;
rrtbi:dev=,force; to block the device
rrtbe:dev= to d block the dev
........................................
EXRPP:RP=98 TO CHECK THE STATE OF RP
BLRPI:RP=; BLOCK THE RP
BLRPE:RP=; DBLOCK
.........................................
RXESE: TO PUT OUT OF SERVICE
RXESI: TO PUT IN SERVICE
.....................................
ALLIP:ALCAT=PROC;
RXMOP:MO=RXOTG-;
TO CHECK RP FAULT
TO SEE THE SOFT WARE NAME
............................................................
C7LTP:LS=ALL;
TO CHECK ALL C7 LINK.
EXSCP:NAME=ALL TO CHECK SLC UNDER WHICH RALT
C7SUE:LS=2-563; TO BLOCK C7 LINK
C7SUC:LS=2-456,DMI=0,ACL=A1,LVA=2; TO CHANGE THE ALARM LEVEL
C7SUI:LS=2-876; TO D BLOCK THE C7LINK
.................................................................
OUT STANDING FAULT
OPS...FILE OPEN...HOME...CFD.....DIALY FAULTS.....RUN FILE FROM TOP.
OPEN FROM EXEL...SELECT 10.16.40.129...HOME ..CFD...OM...04021006 YEAR
MONTH DATE TIME....COPY PAST TO OUT STANDING.
..................................................................
DIALY FAULT SUMMARY
1-first we run file from alb and saved in the path or folder name
/home/cfd/dfs
THE FILE IS ON /HOME/CFD/DFS
>PWD
>CD space ..
>CD cd/dfs
>CD DFS
>DFS
ENTER INPUTFILE NAME
MO_DATE
MO-091204 in input file we will save
the which we putit on alb
ENTER OUT FILE NAME DFS_DATE
from exel-home-cfd-dfs
we will put the name which we will open it
FROM EXCEL HOME..CFD...DFS and writ file name after that copy this file
to daily fault summrey master
then past that on input after that writ mouse and refrish
the dialy fault summery will be on shared folder -omcdxb&aan-reportdialey fault summery
.........................................................................
....................................
FORMELA FOR SERVICE INTRUPTION (=G+H-E-F) ENDDATE+ENDTIME-STARTDATESTARTTIME.
.........................................................................
..................
IN CASE OF CP FAULT
1-REPCI
2-REMCI: PCB=POWC,MAG=CPU-B;
3-RECCI
.............................................................
NTSTP:SNT=ALL........ TO PRINT ALL SNT
.........................................................................
....
..........................................
TCH AND SDH LIMIT
VALUE
1-IF NUMBER OF DCH FREQUENCY 1 OR 2 HE SDCCH WILL BE 1 IF 3 OR -4-5-6 THE
SDCCH WILL BE 2 IF 7 OR 8-9-10-11-12- THE SDCCH WILL 3.
2-SDCCH LIMIT VALUE= NUMBER OF SDCCH X 8.
3-TCHFR LIMIT VALUE=NUMBER OF DCH X 8 - SDCCH -1.
4-TCHEFR=TCHFR VALUE/2 -4.
......................................................................
IMLCT:SPG=0;
MCSAP:FILE=TRLOG1FILE,COMMAND="fcrws",SDATE=20040410,STIME=0000,EDATE=200
40410,IO1=ALL; ...... to cheack the command in the bsc.
END;
.........................................................................
.......................................
RX DIVERSITY LOST:
WE HAVE TWO RX IN EACH CELL THEIS TWO RX TRY TO GET BEST DIVERSITY FOR
CALL IF THIS RX DIDNT RECIVE GOOD SIGNAL THAT MEAN WE HAVE PROBLEM ON RX.
RF LOOP TEST:
NORMALY DXU CHECK DO RF TEST TO TRX AND ALL HARDWARE UNDER DXU IF ONE IF
THIS HARDWARE HAVE PROBLEM IT WILL GIVE AS RF LOOP TEST FAULT.
NON-VOLATILE MEMORY CORRUPTED:
IN THE DXU WE HAVE MEMORY CALLED VOLATILE IN THIS INFORMATION CORUPT WE
WILL GET THIS ALARM SO AFTER DXU RESET IT WILL CLEAR.
VSWR:
IT'S LIKE RATIO THE SIGNAL WILL GO FROM BTS TO ANTENA ON 1 DB AND IT WILL
REFLACT BACK TO BTS THE RATIO , IT'S SHOUD NOT BE BIG DIFFRENT BETWEEN
SENDING AND RECIVING
IF THERE WAS BIG DIFFRENT WE WILL GET THIS ALARM.
.........................................................................
.............................
HOW TO CHECK IF LINK IS CASSCATED OR NOT??
GCELL RBLT NUMBER SPACE | SPACE GREP SPACE BSC5
.........................................................................
...............
HOW TO REMOVE THE TG AND CELL??
RXMOE:MO=RXOtG-220&-221;
RXMOE:MO=RXOtS-220-11-0&&-7;
RXMOE:MO=RXOtS-220-10-0&&-7;
RXMOE:MO=RXOtS-220-9-0&&-7;
RXMOE:MO=RXOtS-220-8-0&&-7;
RXMOE:MO=RXOtS-220-7-0&&-7;
RXMOE:MO=RXOtS-220-6-0&&-7;
RXMOE:MO=RXOtS-220-5-0&&-7;
RXMOE:MO=RXOtS-220-4-0&&-7;
RXMOE:MO=RXOtS-220-3-0&&-7;
RXMOE:MO=RXOtS-220-2-0&&-7;
RXMOE:MO=RXOtS-220-1-0&&-7;
RXMOE:MO=RXOtS-220-0-0&&-7;
RXMOE:MO=RXOTX-220-0&&-11;
RXMOE:MO=RXORX-220-0&&-11;
RXMOE:MO=RXOTRX-220-0&&-11;
RXMOE:MO=RXOTF-220;
RXMOE:MO=RXOIS-220;
RXMOE:MO=RXOCON-220;
RXMOE:MO=RXOCF-220;
RXAPE:MO=RXOTG-220,DCP=ALL;
RXTCE:MO=RXOTG-220,CELL=,CHGR=;
RXMOE:MO=RXOTG-220
.........................................................................
......................
RXMOI:MO=RXOTG152,COMB=HYB,RSITE=PALMSTRPSHPCPLX,SWVER=B0531R0808,TRACO=POOL;
RXMOC:MO=RXOTG-152,FHOP=BB;
RXMOI:MO=RXOCF-152,TEI=62;
RXMOI:MO=RXOIS-152;
RXMOI:MO=RXOTF-152,TFMODE=SA;
RXMOI:MO=RXOTRX-152-0,TEI=0,DCP1=128,DCP2=129&130;
RXMOI:MO=RXOTRX-152-1,TEI=1,DCP1=131,DCP2=132&133;
RXMOI:MO=RXOTRX-152-2,TEI=2,DCP1=134,DCP2=135&136;
RXMOI:MO=RXOTRX-152-3,TEI=3,DCP1=137,DCP2=138&139;
RXMOI:MO=RXOTRX-152-4,TEI=4,DCP1=140,DCP2=141&142;
RXMOI:MO=RXOTRX-152-5,TEI=5,DCP1=143,DCP2=144&145;
RXMOI:MO=RXOTX-152-0&&-5,BAND=GSM900,MPWR=33;
RXMOI:MO=RXORX-152-0&&-5,BAND=GSM900,RXD=AB;
RXMOI:MO=RXOTS-152-0-0&&-7;
RXMOI:MO=RXOTS-152-1-0&&-7;
RXMOI:MO=RXOTS-152-2-0&&-7;
RXMOI:MO=RXOTS-152-3-0&&-7;
RXMOI:MO=RXOTS-152-4-0&&-7;
RXMOI:MO=RXOTS-152-5-0&&-7;
RXAPI:MO=RXOTG-152,DCP=1&&18,DEV=RBLT-4865&&-4882;
!RXTCI:MO=RXOTG-152,CELL=47432,CHGR=0;
.........................................................................
................................................
how to check the palm
start test:ALLTI:ALI=0;
END TEST
ALLTE:ALI=0;
.........................................................................
.......................
radep:dev=rtth1d-965;
1
ntcop:snt=rtth1s-30;
to check the dev under wiche snt
to print the dev under this snt
rrtbi:dev=rtth1d-962&&-991,FORCE;
to block the dev
ntbli:snt=rtth1s-30; to block the snt
FIRST STEP-
SECOND STEP-2
THIRD STEP
-3
FORTH STEP-4
ntTEi:snt=rtth1s-30; to block the snt TO TEST SNT FIFTH-5
ntble:snt=rtth1s-30; to dblock the snt
SIX STEP-6
rrtbe:dev=rtth1d-962&&-991;to dblock the dev
SEVNTH STEP -7
.........................................................................
...................
HOW TO GET THE PERSENTAGE% WHIL CHECKING THE SDCCH SUC
WE WILL TAKE THE SUC ATTEMT% BY ALL ATEMTS THEN * 100= WE WILL GET THE
PERSENTAGE.
FOR EXAMPLE :
CELL SDCCH
41962
SDTCONG
0
CNRLCNG
0
SDDROP
0.3
ERLANG
2.1
CCALLS CMSESTB
1630
1044
CNDROP SDAVAIL
3
100
1044 /1630 * 100 =74% THIS WILL BE SDCCH SUC RATE.
.........................................................................
..........................
HOW TO CHECK IF THE LINK USED OR NOT
NTCOP:SNT=ETRBLT-6;
STDEP:DEV=RBLT-6523&&-6985;
IF WE GET CONFIG
LINK USED.
NP THAT MEAN LINK NOT USED AND IF WE GET P THAT MEAN
.........................................................................
...............................
HOW TO TAKE BACKUP:
1-FORMAT THE OD.
INMCT:SPG=0;
INVOL:NODE=A,IO=OD-1,VOL=B34041131;
END;
2-MOUNT THE OD.
INMCT:SPG=0;
INVOL:NODE=A,IO=OD-1;
END;
3-TRANSFER THE FILE.
INMCT:SPG=0;
SYMTP:FILE1=RELFSW2,NODE=A,IO2=OD-1,DIR=OUT,SPG=0;
;
.........................................................................
..................................
HOW TO CHECK NEIGHBOUR RELATION.
RLNRP:CELL=24711,CELLR=ALL;
.........................................................................
FOR UMTS SITE HOW TO ACTIVED AND HALTED
1-ACT CELL AFTER THAT PRESS ENTER THEN PUT CELL ID AND F9 TO EXCUTE THE
COMMAND.
2-DEA TO HALT THE CELL.
3- F7 TO SEE LAST COMMAND YOU DID.
......................................................................
HOW TO CONNECT TO THE IOG WHILE BSC NOT CONECTING
IN THE TOP WE WILL WRITE ((NE=BSC2,NODE=A))
APLOC: YOU WILL DEAL WITH THE BSC LIKE DOS PROGRAM
HOSTNAM ...IT WILL TELL YOU IN WHICH NODE Y R WORKING
PRCSTATE...IT WILL TELL YOU WHICH NODE ACTIVE
FCCRESTART OTHER...THIS COMMENT WILL RESTART OTHER NODE . LIKE IF NODE B
NOT WORKING YOU CAN CONNECT TO NODE A AND RESTART NODE B.
.........................................................................
........................................................
HOW TO TEST ALARM IN ALV AND GENERAT ALARM
test system;
end test;
.........................................................................
............
IN CASE OF THE RBLT IS ETM....WE CAN NOT DEBLOCKED BY DTBLE WE CAN DO
-TPCOP:SDIP=ALL;...WE CAN CHECK THIS RBLT UNDER WHICH ETM.
SDIP
5ETM2
SNT
ETM2-4
MS
MS-0
MS-1
CLREF
HP
VC4-0
LP
VC12-0
VC12-1
VC12-2
VC12-3
VC12-4
VC12-5
VC12-6
VC12-7
VC12-8
VC12-9
VC12-10
VC12-11
VC12-12
VC12-13
VC12-14
VC12-15
VC12-16
VC12-17
VC12-18
VC12-19
VC12-20
VC12-21
VC12-22
VC12-23
VC12-24
VC12-25
K
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
L
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
7
7
7
1
1
1
2
2
M
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
DIP
RBLT126
RBLT127
RBLT128
RBLT129
RBLT130
RBLT131
RBLT132
RBLT133
RBLT134
RBLT135
RBLT136
RBLT137
RBLT138
RBLT139
RBLT140
RBLT141
RBLT142
RBLT143
RBLT144
RBLT145
RBLT146
RBLT147
RBLT148
RBLT149
RBLT150
RBLT151
FOR EXAMPLE THE RBLT FROM 126 UNTEL151 ALL THIS UNDER SDIP 5ETM2.
2-TPBLE:SDIP=5ETM2,LP=(WE CAN WRIT ANY RBLT LP FOR EXAMPLE FOR RBLT126
THE LP WILL BE VC12-0;
THE COMMAND WILL BE.
TPBLE:SDIP=5ETM2,LP=VC12-0;
.........................................................................
...........................................................
RLSBP:CELL=ALL>>>>>>>>>> TO CHECK THE CELLS IS BARING OR NOT..
RLSBC:CELL=ALL,ALL,ACC=CLEAR,MAXRET=4>>>>>>>>TO CLEAR ALL BARING CELL.
.........................................................................
...........................................
HOW TO NO THE TYPE OF CABNET BY RXOCF .....
IF YOU ARE GETTING SHALF 1 THAT MEAN 2101........IF YOU ARE GETING SHALF
7 THAT MEAN 2202.....IF YOU ARE GETTING-3229-TAHT MEAN 2301
IF YOU ARE GETTING 3696 OR 3678 THAT MEAN 2302.......
.........................................................................
..........................................
RLSLC:CELL=31640,CHTYPE=TCH,LVA=27;
TO CHANGE THE ALARM LEVEL.
.........................................................
HOW TO RESET THE PORT WHEN THERE IS NO CONNECTION TO THE BSC
IMLIT:SPG=0;
ILNPP:PORT=ALL;.......TO CHECK ALL THE PORT
ILBLI:NP=1-1-2-4; TO BLOCK THE PORT
ILBLE:NP=1-1-2-4; TO DBLOCK THE PORT
END;
THE RATE WILL START WITH 64000;
.........................................................................
.................
RLCFI:CELL=45023,DCHNO=979,CHGR=1;
HOW TO ADD ONE FREQ
RLCFE:CELL=45023,DCHNO=1011,CHGR=1; HOW TO REMOVE ONE FREQ
.........................................................................
........................................
C7LAE:LS=2-540,SLC=11;
TO BLOCK THE SLC IN C7LINK
.........................................................................
.....................
HOW TO KNOW THE TYPE OF CDU
RXMFP:MO=RXOCF-11;
IF THE REVISION 135/1 THE CDU C+E......123/1
CDU C
THE CDU C+......113/1
THE
.........................................................................
..............
HOW TO CHECK THE ALARM FROM PC IN CASE OF APG BSC DOWN..
1-FIRST OPEN COMMAND PROMPT FROM ACCESSORIES
2-THEN TYPE TELNET AND CLUSTOR NUMBER OF BSC ( TELNET 10.50.2.18)
3- USER NAME:BSSOSS
PASSWORD: INIT THEN BSC NUMBER LIKE (INIT23)
4- TYPE MML
5- THEN DO ALLIP OR ANY COMMAND YOU WANT
......................................................................
....................................
THE CLUSTER OF BSC 10.50.2.18 FOR BSC21
10.154.35.47 FOR BSC22
10.50.2.25 FOR BSC23
10.55.102.23 FOR BSC24
10.154.35.54 FOR BSC 25
10.153.14.17 FOR BSC37
.........................................................................
............
WHEN BSC FULL WE WILL GET ALARM
SAAEP:SAE=500,BLOCK=ALL;
EPORTED TO CHECK THE VALUE OF THE CP
SAAII:SAE=500,BLOCK=RXOLE,NI=10000;
SAAII:SAE=500,BLOCK=RXO3EP,NI=10000;
SAAII:SAE=500,BLOCK=RXO3OM,NI=10000;
SAAII:SAE=500,BLOCK=RXOABH,NI=10000;
SAAII:SAE=500,BLOCK=RXOFH,NI=10000;
SAAII:SAE=500,BLOCK=RXOIFH,NI=10000;
SAAII:SAE=500,BLOCK=RXOPL,NI=10000;
SAAII:SAE=500,BLOCK=RXOADE,NI=10000;
THIS COMMAND TO INCREAS THE VALUE OF THE CP;
.........................................................................
..........................
HOW TO CHECK THE ACTIVE AND IDEL LIST
RLMFP:CELL=24512:
HOW TO ADD THE FREQ TO THE CELL
RLMFC:CELL=40862,MBCCHNO=538,MRNIC;
...................................................................
HOW TO RESET THE LINK IN CASE OF NETWORK SYNCHRONIZATION FAULT??
FIRST WE HAVE TO PRINT
NSSTP;
NSBLI:RCM=RCM-0;
NSTEI:RCM=RCM-0;
NSBLE:RCM=RCM-0;
NSSTP;
NSBLI:SDIP=2ETM1,MS=MS-0;
NSTEI:RCM=RCM-0;
NSBLE:SDIP=2ETM1,MS=MS-0;
.........................................................................
.....
HOW TO CHECK THE SLC UNDER WHICH RALT(CCITT7 SIGNALLING LINK FAILURE)
-REPORT TO TEMC
C7LTP:LS=ALL;
C7LDP:LS=ALL;
IF THE SLC NUMBER 5 YOU WILL GET X05-5 IF 6 YOU WILL GET XO5-6
RADEP:DEV=RALT2-513 ;
NTCOP:SNT=ETM2-0;
EXSCP:NAME=ALL;
.........................................................................
......
.....................................................................
HOW TO CHECK THE STATE IF THE NODE A AND B IS WO OR SB??
IMMCT:SPG=0;
IMCSP;
END;
.........................................................................
......
TO CLEAR THE NODE RESTART ALARM
IMMCT:SPG=0;
IMRDP:NODE=A,FORM=SMALL;
END;
.........................................................................
....................
HOW TO DELET AND REDEFINE THE NSVCI THE GPRS...
NSVCI=41501
----------rrvbi:nsvci=41501;
RRNSE:nsvci=41501;
!BLOCK NSVCI!
!DELETE NSVCI!
RRNSI:NSVCI=41501,DLCI=130,DEV=RTGLT-1,NUMDEV=6;
rrvbe:nsvci=41501; !DEBLOCK NSVCI!
!DEFINE NSVCI!
NSVCI=41502
----------rrvbi:nsvci=41502;
RRNSE:nsvci=41502;
!BLOCK NSVCI!
!DELETE NSVCI!
RRNSI:NSVCI=41502,DLCI=131,DEV=RTGLT-33,NUMDEV=6;
rrvbe:nsvci=41502; !DEBLOCK NSVCI!
!DEFINE NSVCI!
.........................................................................
...................
GSSTP; TO PRINT ALL GROUP SWITCH STATE
EXRPP:RP=ALL;
TO PRINT ALL RPS
CLM,SPM,TSM
BLRPI:RP=296,FORCED;
TO BLOCK THE RP
GSBLE:TSM=TSM-A-41;
TO DEBLOCK THE TSM
GSBLI:TSM=TSM-A-41;
TO BLOCK THE TSM
GSTEI:TSM=TSM-A-41;
TO TEST THE TSM
NTCOP:SNTP=TSM-13-1; TO CHECK THE TSM TO WHICH SNT CONNECTED
NTBLI:SNT=ETRALT-40; TO BLOCK THE RALT BEFOR BLOOKING WE HAVE TO BLOCK
THE DEV BY BLODI:DEV=1425&&542;
.........................................................................
................
HOW TO KNOW IF THE LINK NOT USED???
BY USING STDEP:DEV= RBLT-1953&&-1983; IF WE GET CONFIG STATE NP THAT MEAN
LINK NOT USED.
.........................................................................
.......
TO CLEAR THE COMMAND LOG BLOCKED FAULT IN APG BSC
SYCLI;
.........................................................
HOW TO GIVE APG RESTART?
FIRST WE HAVE TO CHECK WHICH NODE ACTIVE..
1-NE=BSC24,NODE=A
2-PRCSTATE TO CHECK ACTIVE NODE A OR B
3- PRCBOOT TO GIVE RESTART.
.........................................................................
........................
HOW TO CLEAR HEARTBEAT FAILURE
CLUSTER RES MCS-ADH-ADM /OFF LINE/ WAIT
CLUSTER RES MCS-ADH-ADM /ON LINE/ WAIT
.........................................................................
..............................
HOW TO CLEAR AP FAULT AND AP REPOT
-CHECK WHICH NODE
- ALIST
- ACEASE 6012:0 THIS NUMBER WILL BE ALARM IDENTIFIER
.........................................................................
.............................
IN CASE IF NO CONNECTION TO THE APG BSC WE CAN LOG ON IN WINFIOL
USERNAME:ADMINISTRATOR
PASS:BSC(NUMBER)ADMIN
.........................................................................
........
HOW TO SWITCH FROM 1 ETM TO OTHER IN CASE OF SLC FAILURE
PWNSP:SDIP=1ETM1;
PWMSI:SDIP=1ETM1,MS=MS-1;
.........................................................................
......................................
TO ADD FREQ ON BA LIST
RLMFP:CELL=31751;
RLMFC:CELL=31753,MBCCHNO=77,MRNIC;
.........................................................................
...................
IN CASE OF IO FAULT
IOBLI:IO=AT-5;
IOBLE:IO=AT-5;
.........................................................................
...........................
DPWSP;......................................TO CHECK THE CP STATE SHOUD
BE...IN CASE OF CP FAULT OR SYSTEM RESTART WE HAVE TO CHECK THIS COMMAND
MAU
NRM
SB
B
SBSTATE
WO
.........................................................................
.................
SYRIP:SURVEY;..........TO CHECK THE BSC RESTART TIME AND TYPE SMALL OR
LARGE.
.........................................................................
.........................
impact .........we are using this word in alex to cheak all new figiher
.........................................................................
......................................................
I ZONE SITE
for the router the password will be (etpwlanpublic) for the access point
the password will be (etpwlanprivate)
ROUTER=R
ACCESS POINT=AP
.........................................................................
...................................................
TO CHECK IF THE HARDWARE SUPORT GSM BAND OR NOT
RXCAP:MO=RXOTX-87-0&&-1;
.........................................................................
...............
RLBCP:CELL=25941;
TO PRINT POWER CONTROL
RLBCE:CELL=25941;
TO DACTIVE POWER CONTROL
RLBCI:CELL=25941:
TO
ACTIVE
POWER CONTROL
.....................................................................
RAEPP:ID=ALL; TO PRINT BSC LEVEL PRAMETERS
RAEPC:PROP=MCCSUPPORT-2; TO DO THE CHANGE
..............................................
TO MAKE PROYERTY FOR OL SUB CELL.
RLLLP:CELL=3293;
RLLLC:CELL=3293,SCLDLUL=100;
.........................................................................
..
RLSLC:CELL=32102,SCTYPE=OL;
RLLLC:CELL=32102,SCLDSC=UL;
RLSBP:CELL=Y51118;
RLSBC:CELL=Y51118,CRO=5;
RXBLI:MO=RXOTRX-365-7,SUBORD,FORCE;
RXESE:MO=RXOTRX-365-7,SUBORD;
RXMOE:MO=RXOTS-364-7-0&&-7;
RXMSP:MO=RXOTRX-364-0&&-11;
RLCPP:CELL=Z51280;
RLCPC:CELL=Z51280,BSPWRB=41, BSPWRT=41;
SAAEP:SAE=1153;
RLDEP:CELL=Z51270;
RXTCP:MO=RXOTG-256;
RXMOP:MO=RXOTX-341-0;
DTSTP:DIP=RBLT364;
SAAEP:SAE=1153;
RXTCP:MO=RXOTG-341;
RXMSP:MOTY=RXOTX;
RXBLE:MO=RXOTRX-185-0&&-11;
RXMSP:MO=RXOTRX-341-0&&-11;
RXBLI:MO=RXOTRX-341-11,SUBORD,FORCE;
RXESE:MO=RXOTRX-341-11,SUBORD;
RXMOE:MO=RXOTS-341-11-0&&-7;
RXMOI:MO=RXOTRX-365-4,TEI=4,DCP1=214,DCP2=215&&222,SIG=CONC;
RXMOI:MO=RXOTRX-365-5,TEI=5,DCP1=223,DCP2=224&&231,SIG=CONC;
RXMOI:MO=RXOTRX-365-6,TEI=6,DCP1=232,DCP2=233&&240,SIG=CONC;
RXMOI:MO=RXOTRX-365-7,TEI=7,DCP1=241,DCP2=242&&249,SIG=CONC;
RXMOI:MO=RXOTX-365-4&&-7,BAND=GSM900,MPWR=47;
RXMOI:MO=RXORX-365-4&&-7,BAND=GSM900,RXD=AB;
RXMOI:MO=RXOTS-365-7-0&&-7;
RXESI:MO=RXOTG-365,SUBORD;
RXBLE:MO=RXOTG-365,SUBORD;
RXMSP:MO=RXOTRX-365-1,SUBORD;
RXBLE:MO=RXOTX-365-0;
RLSTC:CELL=Z51270,STATE=ACTIVE;
RLSLP:CELL=Z51270;
RXCDP:MO=RXOTG-365;
RXMFP:MO=RXOCF-365,SUBORD,FAULTY;
RLCFP:CELL=Z51270;
RXMSP:MO=RXOTRX-365-0&&-11;
******************* NETWORK SYCHRONIZATION FAULT*************************
NSBLI:SDIP=4ETM2,MS=MS-0;
NSTEI:SDIP=4ETM2,MS=MS-0;
NSBLE:SDIP=4ETM2,MS=MS-0;
********************* GB LINK ****************************
RRGBP;
DTSTP:DIP=RTGLT0&RTGLT1;
******************** RP FAULT******************************
ALLIP;
REPRI:RP=135;
REMRI:RP=135,PCB=RPG2; ( OR REMRI:RP=986,PCB="GARP2-GPH B"; )
RECRI:RP=13;
*************************************************************************
*********************************************************
HAMMADS COMMANDS
---------------cfind BSCN7 -date 2008-10 | grep 4999
more h_a_13oct_2008.txt
******HEART BEAT FAILURE***********
HOW TO KNOW IP ADDRESS OF BSC
1ST METHOD.
IN GCELL WRITE
eac_esi_config -ne BSCN6
IT WILL GIVE U PRINT OUT OF 3 IP ADDRESS
FIRST IS IP, 2 & 3 IS SIDE A & B
2ND METHOD
OPEN OSSNETWORK EXPLORER IN RIGHT CLICK
THEN
ONRM_ROOTMO
THEN
SELCT BSCN6(ANY BSC) RIGHT CLICK MODIFY YES
THEN
NEXT NEXT TILL U GOT IP ADDRESS
***************************
12tru * 8 ts =96 , minus 3 for sdcch & 1 for bcch
BSC PROCESSOR LOAD - IN CENTRAL DIRECTORY FILE NAME
plldp.cfd.bak.bak ( run in ops)
barring files (central directory barring- BSC6(FIRTS APPLY 20%)
1765 copier password
CLEARING BARRING
SERVER IP 10.48.155.34
checking stats
http://10.66.105.50/Servint/hourly_stats.asp
browser)
(checking stats in windows
IZONE
http://10.99.91.152/CSCOnm/servlet/login/login.jsp(IZONE CHECKING
dxb_hamad,Hammad22)
SERVICEI INTRUPTION
http://dxb00020124/serviceinterruption/
MNO FOLDER
\\oasisj\MNO\VIP-FTR
SMS SENDING
https://smsb.etisalat.corp.ae:1117/Login.jsp?
Myjsessionid=B9D35B52FA7D12A566E07C7B44E822EC.worker2
*********HOW TO CHECK IF LINK IS CASSCATED OR NOT??****
GCELL RBLT NUMBER SPACE | SPACE GREP SPACE BSC5
GCELL RBLT15 | grep BSC33GCELL RBLT15 | grep BSC33
****************** RALTS -- DIGITAL - FAULT SUPERVISION****
C7LDP:LS=ALL;
(SHOWS LINK SET DATA)
RADEP:DEV=RALT-1281;
(SHOW DEVICE DATA IN BSC)
ETRALT=40 REPORT LIKE THIS 3001+40
30041
IF ERROR ON LINK REPORT TO TRANIMISSION
SYSTEM NO 3001 + 80 = 3081
BSC6 - X29
THIS FORMAT TO BE REPORTED.
******************************
WO = WORKING ,
ABL = AUTOMATIC BLOCK,
MBL= MANUALLY BLOCK
AIS= ALARM INDICATION SIGNAL (ALL 1'S)
ACWL= AIRCRAFT WARNING ALARM
CBI = CLEARED BYITSELF
MCB = MAIN CIRCUIT BREAKER (ELCB)
RDI = REMOTE DEVICE INDICATION
RBO = RESET BY OMCR
LOS = LOSS OF SIGNAL
1A
1A
1A
1A
1A
1A
1a
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1A
1a
1A
1
1
2
4
5
5
7
ON CF POWER failure
on trx
"Reset, Power On"
on cf & TRX
"Reset, Switch"
ON CF = DXU SOFTWARE FAULT
ON TRX = "Reset, RAM Fault"
ON CF = RAM FAULT ON CF
on cf = bts in NOOP STATE
8 on cf Timing Unit VCO Fault
8 fault on trx
Timing Reception Fault
9 FAULT on cf = TIME DISTRIBUTION FAULT
9 fault on trx = Signal Processing Fault
10 FAULT ON CF = INDOOR TEMP OUT OF RANGE
10 ON TRX = toora dona communication fault
11 ON TRX FAULT = DSP CPU COMMUNICATION FAULT
12 fault on cf DC Voltage Out Of Range
13 FAULT ON TRX = RX LOOP TEST FAULT
14 fault on cf
Bus Fault
14 fault on trx
RU DATABASE CORRUPTED
17 fault on cf
HW And IDB Inconsistent
17 fault on trx = X-Interface Fault
18 ON TRX = DSP Fault
19 on trx
"Reset, DXU Link Lost"
21 FAULT = ON CF HW FAULT
21 fault on trx Internal Configuration Failed
1A 22 ON TRX =Voltage Supply Fau
1A 23 on trx Air Time Counter Lost
1A 25 ON TRX FD=TX/RX Communication Fault
1A 30 ON TRX
FD=DSP RAM Soft Error
1B 1 ON RXOTF
DXU-Opt EEPROM Checksum Fault
1B 1 ON TRX INDOOR TEMP OUT OF SAFE RANGE
1B 0 FAULT = CDU NOT USABLE (ON TX)
1B 0 ON TRX = CDU COMBINER NOT USABLE
1B 2 fault on tx CDU Output Power Limits Exceeded
1B 3 fault on trx
DC Voltage Out Of Range
1B 4 fault ON TRX LOCAL MODE /Indoor Temp Above Safe Range
1B 4 fault on tx TX Antenna VSWR Limits Exceeded
EXTERNAL1B
4 ON CF
FD=L/R SWI '('BTS In Local Mode')'
EXTERNAL1B ON CF 4
FD=L/R SWI '('TRU In Local Mode')'
1B
1B
1B
1B
1B
1B
1B
1B
5 external on cf
L/R TI (Local to Remote while Link Lost)
5 ON RXORX
RX Synthesizer A/B Unlocked
7 fault on RX Communication Fault
13 FAULT = TX Output Power Limits Exceeded
8 FAULT = TX SYNTHESIZER A/B UNBLOCKED
9 ON TRX FD=Y Link Communication Lost
9 ON RX = RX CABLE DISCONNECTED
27 ON TX = TX MAX POWER RESTRICTED
1B 10 fault on tx
TX Communication Fault
1B 10 fault on RX
RX Initiation Fault
1B 10 ON TRX TIMING RECEPTION FAULT
1B 14 ON TX= TX Saturation
2B 10 FAULT = REPORTED TO POWER
2B 9 FAULT = DOOR ALARM
external 2b 4 CXU TRU RXB CABLE
fcode external 1B 4
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2a
2A
2A
2A
2A
0 ON TRX=RX CABLE DISCONNETED
1 FAULT ON CF = RESET POWER ON
1& 2 ON TRX FAULT = RX Path Loss
3 on trx
RX Synthesizer Unlocked
4 ON TRX
RX Internal Voltage Fault
5 ON TRX
RX Communication Fault
6 on cf "Reset, Internal Function Change"
6 TX COMMUNICATION FAULT
8 FAULT = ON CF/VSWR Limits Exceeded
9
on cf Power Limits Exceeded
12 on cf TX Output Power Limits Exceeded
12 ON TRX TX Output Power Limits Exceeded
13 ON TRX
TX Saturation
14 on cf Supervision/Communication Lost
14 ON TRX
Voltage Supply Fault
15 VSWR/Output Power Supervision Lost
16 faukt ON CF = indoor temp out of SAFE RANGE
16 ON TRX = NON VOLITILE MEMORY CORRUPTED
16 on cf
Indoor Temp Out Of Normal Conditional Range
17 on trx Loadfile Missing in TRU
18 ON CF DC Voltage Out Of Range
2A 19 on cf
Power and Climate System in Standalone Mode
2A 12 FAULT = RX Maxgain/Mingain Violated
2A
2A
2a
2A
2A
2A
2A
2A
2A
2A
23 FAULT = ON CF CLIMATE CAPICITY REDUCED
23 ON TRX
Default Values Used
22 fault on trx voltage supply fault
22 fault on cf Battery Backup Capacity Reduced
21 FAULT = INTERNAL POWER CAPACITY REDUCED
25 FAULT ON TRX, TX Max Power Restricted
26 FAULT ON CF
Climate Sensor Fault
26 Fault ON RXOTRX DB parameter fault
25 fault on cf Loadfile Missing in DXU or ECU
28 fault on cf A/D Converter Fault
2A
2A
2A
2A
2A
29
30
31
32
33
FAULT
fault
FAULT
fault
FAULT
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
2A
36
37
38
39
39
46
41
40
40
42
43
45
46
53
54
fault= on cf RU Data Base Corrupted
fault on cf Circuit Breaker Tripped or Fuse Blown
fault on cf
Default Values Used
FAULT = on trx RF Loop Test Fault, Degraded RX"
FAULT ON CF RX CABLE DISCONNECTED
FAULT = ON CF/DB PARAMETER FAULT / INSTALL IDB
FAULT = ON CF/LOST COMM TO TRU
FAULT = DXU LINK LOST
FAULT ON TRX MEMORY FAULT.
fault on cf
Lost communication to ECU
on cf
Internal Configuration Failed
ON CF HIGH TEMP
on cf
DB parameter fault
ON CF H/W & IDB INCONSISTENT
ON CF TIMING BUS FAULT
on cf = VARISTOR FAULT (CABINET)
= on CF
Bus Fault
ON CF High Frequency Software Fault
oncf Non-Volatile Memory Corrupted
= RX DIVERSITY LOST
DFNF PROBLEM
(DISK FILE NOT FOUND)
OPERATIONAL SOFTWARE NOT PRESENT IN APG OR IOG OR NOT PROPERLY INSTALLED
IDB TO BE INSTALLED AGAIN
************ CHEKING GPRS********
RRGRP;
GSSTP;
RLGSP:CELL=44711;
RLGRP:CELL=44711;
RLBDP:CELL=44711;
RLPDP:CELL=44711;
raepp:id=all;
raepc:prop=CHCODING-1;
rlgsc:cell=44711,FPDCH=8;
rlcfp:cell=44711;
rlstc:cell=44711,state=ACTIVE;
RLCRP:CELL=44711;
RRGBP;
CHECKING GRPS LINKS .
RLGSP:CELL=13611;
IF FPDCH=1 THEN GRPS IS THERE IF =0 THEN NO GPRS
RLGRP:CELL=13591;
RLGSC:CELL=21332,FPDCH=1; ( TO CHANGE FPDCH VALES BUT BEFORE MAKE GPRS
OFF)
RLGSE:CELL=13611;
RLGSI:CELL=13611;
BLOCK
DEBLOCK
GPRS ANY SITE NOT CARRYING TARFFICE & RP RESET.
RLGRP:CELL=41591;
TAKE RP AND RESET
*******************DYNAMIC BTS POWER CONTROL CELL DATA*****************
RLACP:CELL=40092; (STATE ON OR OFF SDCCH MORE OR LESS ACCORDING TO
TRAFIC)
RLBCP:CELL=14161; (Radio Control Cell, Dynamic BTS Power Control, End)
RLBCE:CELL=14161; (INACTIVE OR OFF)
RLBCP:CELL=14161;
(ACTIVE OR ON)
RLBCI:CELL=
rlssp:cell=32021; ( to check nccperm )
RLDGP:CELL=31021;(GROUP)
RLDEP:CELL=31021;(DESCRIPTION DATA)
RLLHP:CELL=31021;(LAYERS)
RLLHC:cell=4562,layerthrshod=45; this coomand to change all this
parametars
RLCFP:CELL=31021;
FREQUENCIES
(CONFIGRATION FREQUENCY
DATA)
RLCFI:CELL=31021,DCHNO=17;
(TO ADD FREQUENCY)
RLCFE:CELL=31021,SDCCH=2OR 3 OR 4 ,CHGR=0,1; (TO DELETE FREQUENCY)
RLCPP:CELL=31021; (POWER DATA)
RLCPC:CELL=, BSPWRT=12, BSPWRT= & BSPWRB .....TO CHANGE THE PRAMETER
RLSSP:CELL= 21312; TO PRINT ACCMIN
CCHPWR,CRH,DTXU,RLINKT,NECI,MBCR,NCCPERM
RLSSC:CELL=
TO CHANGE THIS PARAMETER
RLNRP:CELL=24711,CELLR=ALL ( ALL BEIGHBOURING RELATIONS)
RRGBP;
(TO CHECK ALL GB LINK)
RLGRP:CELL=ALL;
BACKB
RLMFP:CELL=26261;
( TELLS IN CELLS GPRS POSITION)
(TELLS BCCHNO OF NEIGHBOUR)
***************** HOW TO DEFINE NEIGHBOURING REALTIONS*******
RLNRP:CELL=24711,CELLR=ALL
RLNRE:CELL=31721,CELLR=3622;
RLNRI:CELL=31721,CELLR=3622;
! DELETING
! DEFINING
*************** NETWORK SYSNCHORONIZATION FAULT ******************
NSBLI:SDIP=2ETM1,MS=MS-0;
NSTEI:SDIP=2ETM1,MS=MS-0;
NSBLE:SDIP=2ETM1,MS=MS-0;
NSSTP;
NSBLI:DIP=RALT64;
NSTEI:DIP=RALT16;
NSBLE:DIP=RALT16;
********** GPRS/EGPRS ******************
RBS2101,2308,2302 NOT SUPPORT EGPRS ONLY SUPPORT GPRS
2 ONLY
CODING SCHEME 1 &
RBS2202 SUPORT GRPS&EGPRS FOR EGPRS IT REQUIRE STRU
RBS2206 SUPORT GRPS&EGPRS FOR EGPRS IT REQUIR EDTRU
BOTH 2202 & 2206 REQUIR CODING SCHEME 0 TO 4
*********************** TO CHANGE LVA VALUE IN RLSLP ****************
eaw BSC15 ( WE CAN CHECK ALL STATUS IN GCELL SCRIPT INSTEAD OF COMMAND
HANDLER)
RLSLP:CELL=4722;
RLSLC:CELL=4722,CHTYPE=TCH,LVA=83; ( 82 OR 83 ANY VALUES TO BE CHANGED)
***************** TO CHECK THE LOOP ****************************
RXLTI:MO=RXOTS-28-10-0&&-11;
********** FOR LOOP RELEASE **********************************
RXMOP:MO=RXOTG-226; (CHECK THE TGFID NUMBER DOWN)
SYFRI:FID=H'0000-H'996F,BLOCK=RXOTG,IND=226,FILENUM=1; (FOR LOOP RELEASE)
(A command is used for ordering a manual Forlopp release.
As parameters the Forlopp ID and the reference to a connected individual
must be given.
If a number of Forlopp releases are pending, the manual initiated Forlopp
release will be the first to be executed.
If too many Forlopp releases are pending the command will be rejected. )
RXPLI:MO=RXOTG-226,UC; (FORCE LOADING THE SOFTWARE)
***************HOW TO KNOW BTS TYPE WITHOUT GCELL ***************
RLLHP:CELL=42421;
IF LAYER =2 MICRO
IF LAYER = 3 MACRO
BOE 602 14/1 2206 CABINET
RXMFP:MO=RXOCF-336;
IF DXU ON SHELF 7 = RBS 2202
(CHECK ON DXU)
SHELF 8 & 6 = RBS 2206
SHELF 1 = RBS 2101
SH:--& REVISION 3678 === 2302
SHU:-- & REV 32XX & ROA 32XX
=== 2301
SHU:3
=== 2106
e.g
IXU >>>>>>>>>> 2308
1--
RUPOSITION
C:0 R:C SH: 8 SL: 48
2-- RU RUREVISION
0 ROA 117 3678/1
NOT EDGE
RULOGICAL DX
DX
DXU_21
R3A
RUSERIALNO
A532320165
DXU_21
==== 2ID
==== 2206
===== 2301/2302
RLBDP:CELL=42591; (IF EDGE ENABLED THEN ENTRIES SHOULD BE THERE)
1- ROA 117 3229/1
2- ROA 117 3229/2
==== NOT EDGE
1002/2
==== EDGE
DCP1 IF DCP VALUES ARE 2 THEN EDGE DEFINED
HOW TO DEFINE EDGE
DCP1
232
TEI=0 DCP1=178,DCP=179&&186
rlstc:cell=4692,state=halted;
rxbli:mo=rxotg-133,force,subord;
rxese:mo=rxotg-133,subord;
RXMOE:MO=RXOTRX-133-0;
RXMOI:MO=RXOTRX-133-0,TEI=0,DCP1=178,DCP2=179&&186;
RXMOC:MO=RXOTRX-133-0,CELL=4692,CHGR=2;
RXMOC:MO=RXOTX-133-0,CELL=4692,CHGR=2;
rxmoc:mo=rxotrx-133-0,sig=conc;
RXAPP:MO=RXOTG-133;
RXAPI:MO=RXOTG-133,DEV=RBLT2-4285&&-4287,DCP=29&&31,RES64K;
RXMsP:MO=RXOTG-133,SUBORD;
rlstc:cell=4692,state=active;
rlslp:cell=4693;
rlgrp:cell=4693;
rlgsi:cell=4692;
***************HOW TO KNOW RBLT WITHOUT GCELL ***************
RXTCP:MO=RXOTG,CELL=4671;
RXTCP:MOTY=RXOTG,CELL=4671;
RXAPP:MO=RXOTG-1;
************* TO SEE THE TG ******************
RXTCP:MOTY=RXOTG,CELL=41653;
*******************MASTER & SLAVE **************
RXMOP:MO=RXOCF-203;
(IF TEI=61, THEN SLAVE IF TEI=62=MASTER)
ALL BELOW 62 ARE SLAVE
************************ BLOCKING AND DE BLOCKING ************
(RADIO X-CEIVER ADMINISTRATION MANUAL BLOCKING OF MANAGED
OBJECT, END)
BLOCK INITIATED
RXBLI:MO=RXOTRX-120-0&&-3!,FORCE;
BLOCK END
RXBLE:MO=RXOTRX-120-0&&-3!,
THEN CHECK TO SEE STATUS
(&& MEANS 3 TRU'S BLOCK)
TO CHECK ON BOARD WHICH TG IS FAULTY***********
RXMFP:=MO=RXOTG-30, SUBORD,FAULTY;
RXOTX & RXOCF
(MANAGED OBJECT FAULT INFORMATION)
RXMSP:MO=RXOTX-137-0&&-11;
RXELP:MO=RXOTX-137-0&&-11;
( SHOWS BLOCK/OPERATIONAL )
(SHOWS FAULT HISTORY)
*****************TO CHECK STATUS OF BLOCK/WORKING (ETC CARD)
*****************
TO CHECK THE LINK CONNETED IN THE ETC CARD IN THE BSC'S
NTSTP:SNT=ETRBLT-34;
(SWITCHING NETWORK TERMINAL STATE, PRINT)
RESULT WILL BE
<NTSTP:SNT=ETRBLT-34;
SWITCHING NETWORK TERMINAL STATE
SNT
ETRBLT-34
END
4022
STATE
BLOC
BLS
ABL
LST
FCODE
*********TO CHECK FREQUENCIES (WHICH TRU BELONG TO WHICH
FREQUENCY)**************
RXCDP:MO=RXOTG-125; (RADIO X-CEIVER ADMINISTRATION MANAGED OBJECT
CONFIGURATION DATA, PRINT)
***************** TO CHECK ALL TRU IN THE SITE (TG MASTER
/SLAVE)*****************
RXMOP:MO=RXOTX-21-0&&-11;
***************** HOPING ON/OFF ********************
RLCHP:CELL=39464;
RLCHC:CELL=39464,HOP=OFF;
RLCHC:CELL=39464,HOP=ON;
THEN
RLSLP:CELL=38864;
(CHECK ALL TRU WORKING)
THEN ALSO
RXMFP:MO=RXOTRX-85-3;
(CHECK ALL BLOCK STATUS WORKING???)
THEN
RXMFP:MO=RXOTG-85,SUBORD,FAULTY;
(GIVE U FAULT INFORMATION)
AND IN LAST
RXCDP:MO=RXOTG-85;
(ALL PROCEDURE FIRST BLOCKING/DEBLOCKING
HOOPING ON/OFF IS CALLED REST MY OMCR)
*******FOR CHECKING THE 15/30 MINUTES CHECK ************
FIRST RUN THIS COMMAND
IMLIT:SPG=0;
THEN
THIS COMMAND BY CHAGING THE OBJ (CELL ID) IMPORTANT
SDTDP:RPTID=132,OBJTYPE=CLSDCCH, OBJ=25521,INT=15;
SDTDP:RPTID=130,OBJTYPE=CELTCHF, OBJ=46371,INT=15;
SDTDP:RPTID=151,OBJTYPE=CELTCHH, OBJ=46371,INT=15;
SDTDP:RPTID=331,OBJTYPE=CLTCH, OBJ=40852,INT=15;
SDRRP:RPTID=ALL;
END;
************************TO SHOW ERROR LOG **********************
AND FAULT MANAGMENT(CONDITION OF DXU )
RXELP:MO=RXOCF-35;
IS THE PRODUCT GROUP)
(RADIO X-CEIVER ADMINISTRATION ERROR LOG, PRINT-35
RXMFP:MO=RXOCF-35;
INFORMATION,PRINT)
(RADIO X-CEIVER ADMINISTRATION MANAGED OBJECT FAULT
RXMSP:MO=RXOCF-35;
STATUS, PRINT)
(RADIO X-CEIVER ADMINISTRATION MANAGED OBJECT
************************* TO CHECK ON BOARD WHICH TG IS FAULTY***********
RXMFP:MO=RXOTG-30,SUBORD,FAULTY;
(MANAGED OBJECT FAULT INFORMATION)
********** SITE WORKING OR NOT BY CHECKING FREQENCY*******
RLSLP:CELL=47761
(RADIO CONTROL CELL SUPERVISION OF LOGICAL CHANNELS AVAILABILITY DATA,
PRINT)
*********** TO SEE THE ERROR LOG FOR THE PARTICULAR BSC **********
RXELP:MO=RXOTG-37;
(RADIO X-CEIVER ADMINISTRATION ERROR LOG, PRINT)
RESULT WILL BE
MO
RXOTRX-37-11
BTSSWVER
ERA-G04-R07V01*
DATE
05-06-09
TIME
17-26-17
REPLMAP
000000000000 000000000000
1AMAP
000000000000 000000000000
1BMAP
000000000000 000000000000
2AMAP
000000000000 000000000000
BTS
RES
********************TO CHECK STATUS OF WORKING LOOP*************
AND AVAILABLE RBLT (FREE OR NOT )
DTSTP:DIP=RBLT61; (Digital Path Transmission Functions,State,Print)
DTQUP :DIP=RBLT126;
RESULT WILL BE
DIGITAL PATH STATE
DIP
TYPE
STATE
SECTION
RBLT61
IEX
WO OR ABL
END
LOOP TSLOTL DIPEND
FAULT
********************CORRESPONDING SDIP LAYER MANUALLY BLOCKED********
IF NEW LINK AND DEBLOCK
DTBLE:DIP=RBLT61;
TPCOP:SDIP=ALL;
( SDIP MANULYA NEED TO DEBLCOK)
( FIND WHICH SDIP BELONGS TO RBLT)
VC12-41
3
7
2
RBLT104
3ETM2
(TAKE THIS INFORMATION)
TPBLE:SDIP=3ETM2,LP=VC12-41; ( DEBLOCK)
DTSTP:DIP=RBLT104;
**************** TO SHOW ALARAM STATUS *************************
ALLIP:ACL=A1;
(SHOWS ALL ALARMS )
ALLIP:ALCAT=BTS;
(SHOW ONLY BTS ALARM OF IOG GROUP)
(FIRE ALARM AND OTHER ALARMS)
******************TO HALT AND ACTIVATE************************
RLSTP:CELL=45351
(TO CHECK FIRST THAT CEL HALTED/ACTIVE)
RLSTC:CELL=47281,STATE=HALTED; (RADIO CONTROL CELL STATE, CHANGE)
RLSTC:CELL=47281,STATE=ACTIVE;
RLSLP:CELL=47281;
********************* TO CHECK ALL SITES HALTED/ACTIVATED ***********
RLSTP:CELL=ALL;STATE HALT;
(RADIO CONTROL CELL STATE, PRINT)
*************TO CHECK DIGITAL PATH QUALITY(RESET LINK) ********
DTQUP:DIP=RBLT37;
THE RESULT WILL BE
DIGITAL PATH QUALITY
INCOMING AND OUTGOING DIRECTION
DIP
RBLT37
T1
10
T2
8
SLIP
0
SLIP2
0
UAS
0
UASR
0
UAV1
0
SECTION
ESV
0
SESV
0
DMV
ESVR
0
SESVR
0
SECTION
ES2V
0
SES2V
0
DM2V
ES2VR
0
SES2VR DM2VR
0
DMVR
UASB1
0
SFV
0
UAV2
0
UASB2
0
SFTI
24
SMI
0
DTQSR:DIP=RBLT37,ES2,SES2,SF;
******************** TO SEIZE THE ALARM*********************
RLSLI:CELL=3212;
(NEVER GIVE THIS COMMAND)
******************* CHECKING E-GSM & P-GSM ***********************
RLCFP:CELL=41595;
RESULT WILL BE
<RLCFP:CELL=41592;
CELL CONFIGURATION FREQUENCY DATA
CELL
41592
CHGR
SCTYPE
SDCCH
SDCCHAC
TN
CBCH
HSN
HOP
DCHNO
0
UL
6
0
2
NO
3
ON
1
OL
0
0
2
NO
3
ON
28
52
72
79
81
90
991
995
1004
1016
END
************************ CELL RESOURCES PRINT ***************
CELL RECOURCES
RLCRP:CELL=49602;
RESULT WILL BE
CELL RESOURCES
CELL
49602
BPC
7558
7559
7560
7561
7562
7563
7564
7565
END
BCCH
1
CBCH
0
CHANNEL
TCH-20154
TCH-20155
TCH-20156
TCH-20157
TCH-20158
TCH-20159
SDCCH-20167
SDCCH-20166
SDCCH-20165
SDCCH-20164
SDCCH-20163
SDCCH-20162
SDCCH-20161
SDCCH-20160
BCCH-20170
SDCCH
8
CHRATE
FR
FR
FR
FR
FR
FR
NOOFTCH
6
SPV
1,2
1,2
1,2
1,2
1,2
1,2
STATE
IDLE
IDLE
IDLE
IDLE
BUSY
IDLE
IDLE
IDLE
IDLE
IDLE
IDLE
IDLE
IDLE
IDLE
BUSY
ICMBAND
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CHBAND
P900
P900
P900
P900
P900
P900
P900
P900
P900
P900
P900
P900
P900
P900
P900
64K
NONE
NONE
NONE
NONE
NONE
NONE
******************** TO SHOW ALARAM STATSUS IN RBS 200******************
EXEDP:EMG=MURGHAMOILFIELD,EM=ALL;
Print)
ALRDP:DEV=EXAL0-0&&-31;
DATA, PRINT )
(Exchange Data, EMGCP EM Equipment,
(ALARM FUNCTIONS, ALARM RECEIVER
*************************** EXCHNAGE INDENTITY DATA******************
IOEXP;
(IO Subsystem Functions, Exchange Identity, Print)
RESULT WILL BE
EXCHANGE IDENTITY DATA
IDENTITY
B07R10/5/0000/0418/0003
END
********************** TO CHECK ALL THE RXOTG IN ONE BSC'S***********
RXTCP:MOTY=RXOTG;
********************** TO CHECK SDIP IN APG (BLOCK/END)************
(SYNCHRONUS DIGITAL PATH DATA)
TPCOP:SDIP=ALL;
(IT SHOWS ALL THE SDIP'S IN APG )
TPBLE:SDIP=4ETM2,LP=VC12-27;
PATH)
(BLOCK THEN CHECK THE LINK)(LP=LOWER ORDER
DTBLE:DIP=RBLT41;
DTSTP:DIP=RBLT90;
(CHECKS ABL/MBL/WO)
********************** TO SEE UL & OL/CHGROUP/PGSM/EGSM**************
RLDGP:CELL=41951;
RESULT
CELL
41951
CHGR
0
1
2
3
SCTYPE
UL
UL
OL
UL
BAND
GSM900
GSM900
GSM1800
GSM900
******************* CELL CONFIGRATION & POWER DATA *************
SEE BSPWRB BSPWRT MSTXPWR SCTYPE
RLCPP:CELL=41951;
RESULT
CELL
41951
TYPE BSPWRB BSPWRT MSTXPWR SCTYPE
INT 45
45
33
UL
45
30
OL
END
*********************CELL DESCRIPTION DATA**********
RLDEP:CELL41951;
***** CHANGING BCCH NO FROM OLD TO NEW BCCH ******
RLDEC:CELL=42391,BCCHNO=63;
*********CELL LOCATING LAYER DATA ****************
RLLHP:CELL=41951;
RESULT
CELL
41951
END
TYPE
INT
LAYER
3
LAYERTHR
95
LAYERHYST
2
PSSTEMP
0
PTIMTEMP
0
FASTMSREG
OFF
*****************CELL CONFIGRATION FREQUENCY DATA*************
RLCFP:CELL=31021;
CELL
31021
CHGR
0
SCTYPE
SDCCH
4
SDCCHAC
0
TN
2
CBCH
NO
HSN
45
HOP
ON
DCHNO
56
68
89
91
************** TO BRINING OUT OF SERVICE & IN SERVICE ***********
RXESE:MO=RXOTRX-16-5,SUBORD;
SERVICE)
(MO IN SERVICE END -BRINGING OUT OF
RXESI:MO=RXOTRX-16-5,SUBORD;
SERVICE)
(MO IN SERVICE INITIATE-BRINGING IN TO
***************** CONNECTING TRU FROM ONE PLACE TO OTHER ******
RXMOC:MO=RXOTRX-16-4,CELL=41951; (MO DATA CHANGE)
*************CONNECTING TG TO CELL************
RXTCI:MO=RXOTG-90,CELL=37120,CHGR=0
***********
(TG TO CHANNEL GROUP INNITIATE)
TO DISSCONNECT THE TG FROM CELL
RXTCE:MO=RXOTG-#,CELL=4342;
(TG TO CHANNEL GROUP END)
********* DEFIING THE TRU************
RXMOI:MO=RXOTG-152,TEL=0 PCP1=128,DCP=129 && 130,SIG=CONC
********DELETING THE TRU***********
RXMOE:MO=RXOTG-107-6-088-7;
(MO END)
*******FOR CHANGING THE SDCCH********
RLSLP:CELL=46211;
RLCLC:CELL=40221,SDCCH=7;
OR
RLCLC:CELL=40221,SDCCH=4,SCTYPE=UL,CHRG=0
RLSLC:CELL=40221,LVA=56,CHTYPE=SDCCH;
(LVA=LIMIT VALUE)
RLSLC:CELL=40221,LVA=56,CHTYPE=SDCCH; SPV=1; (SPV=SPEECH VERSION)
*************** HOW TO TAKE BACK UP ******************************
-----WEEKLY BACK UP--SYBUE;
SYBUP:FILE;
;
SYTUC;
SYBUI:DISC;
------MONTHLY BACK UP BSC----
SYBUE;
SYBUP:FILE; (BEFORE GOING TO BSC)
;
1)
FORMAT OD
INMCT:SPG=0;
INMEI:NODE=A,IO=OD-1,VOL=B36171006; (TAKE CURRENT DATE)
END;
2)
MOUNT OD DRIVE
INMCT:SPG=0;
INVOL:NODE=A,IO=OD-1;
END;
3)
COPY BACK UP FILE TO OD
SYMTP:SPG=0,NODE=A,FILE1=RELFSW2,IO2=OD-1,DIR=OUT;
4) TO CHECK THE FILES IN OD
INMCT:SPG=0;
INFIP:FILE=OD0A1;
END;
5) TO UNLAOD THE OD DRIVE
INMCT:SPG=0;
INVOE:NODE=A,IO=OD-1;
END;
AFTER BACK UP FINISH
SYTUC;
SYBUI:DISC;
************************ SYSTEM BACK-UP FILES DETAILS ************
BEOFRE RUNNING THIS COMMAND WE HAVE TO RUN THE END COMMMAND
END;
SYBFP:FILE;
RESULT WILL BE
ORDERED
< SYSTEM BACKUP FILES
(SYSTEM FUNCTIONS, BACKUP FILES PRINT)
FILE
RELFSW0
SUBFILE
R1
R2
R3
R4
R5
TYPE
DSSMALL
DSSMALL
DSLARGE
DSLARGE
PS,RS
IO
-
EXCHANGE
B07R10/5/0000/0418/0003
OUTPUTTIME
050717 0217
050716 0217
050716 0217
050717 0217
050714 2126
CURRENT
YES
NO
YES
NO
YES
COMMANDLOG
0002515
0002516
-
****************** FOR EMG FAULT (RESET THE EMG)*********************
Extension Module Group (EMG)There are two types of EMGs, as follows:
Type 1 (EMRPB=Extension Module Regional Processor-BUS)
EMG with EMRPB-S, RPBC, or STR-E and EMRP types, belonging to
families EMRP-N and EMRP-D
Type 2
EMG with EMRPB-T, STR-T, and EMRP types, belonging to family
EMRP-T
ONLY WHEN LINK IS UP
REPEI:EMG=(SITE
REMEI:EMG=(SITE
RECEI:EMG=(SITE
ORR
RECEI:EMG=(SITE
NAME),STR=A;
OR EMRP=0-A
NAME),PCB=STRP,MAG=STR-A;
NAME),STR=A;
(IF NOT WORKING THEN DOWN)
NAME),EMRP=0-A
*****************TO RESET THE CP FAULTY UNIT ********
(RESETING THE FAULTY BOARD ON BSC)
REPCI;
INITIATE)
(REPAIR FUNCTIONS, PROCEDURE FOR CP REPAIR,
REMCI:PCB=STUD-A,MAG=CPU;( GIVE FIRST PCB ) (REPAIR FUNCTIONS,MANUAL
INTERVENTION IN CP,INITIATE)
RECCI;
INITIATE )
(REPAIR FUNCTIONS,CHECK AFTER REPAIR OF CP,
****************** TO RESET RP FAULT **********
EXEMP:RP=86,EM=ALL;
( SHOW DEVICE DETAILS)
REPRI:RP=199;
Initiate)
(Repair Functions, Procedure for RP Repair,
REMRI:RP=199,PCB=STCP; (Repair Functions,Manual Intervention in
RP,Initiate)
(WRITE PCB FROM FIRST COMMAND e.g stcp,rpss1 etc)
RECRI:RP=199;
(Repair Check in RP, Initiate)
*********** TO BLOCK & DEBLOCK SNT ************
NTCOP:SNT=RTTF2S-51;
(SWITCHING NETWORK TERMINAL CONNECTION DATA
PRINT)
RRTBI:DEV=RTTF2FD-1634&&-1663!,FORCE;
RRTBE:DEV=RTTF2FD-1634&&-1663;
******************SWITCHING NETWORK TERMINAL FAULT****************
BLOCK DEVICES FIRST & SNT BLOCK ,TEST & DEBLOCK,DEBLOCK DEVICES)
NTCOP:SNT=ALL;
NTSTP:SNT=RHSNT-1;
BLODI:DEV= RHDEV-32&&-63;
BLODE:DEV= RHDEV-32&&-63;
DEVICES
DEBLOCK AFTER SNT TESTING
RRTBI:DEV=RHDEV-32&&-63,FORCE;
RRTBE:DEV=RTTF2FD-1634&&-1663;
RADEP:DEV=RTTF2D-1169;
STDEP:DEV=RTTF2D-1169&&-1179;
>>>>>>> WHEN ONLY SNT DOWN >>>SWITCHING NETWORK TERMINAL FAULT
NTBLI:SNT=RHSNT-1;
NTTEI:SNT=RHSNT-1;
NTBLE:SNT=RHSNT-1;
NSSTP; (FOR CHECKING)
C7LTP:LS=ALL;
( CHECKING)
1- NTSTP:SNT=ETRBLT-3;
(CHECK ABL OR WO) IF ABL THEN
2- NTBLI:snt=etrblt-3;
3- NTTEI:snt=etrblt-3;
4- NTBLE:snt=etrblt-3;
*************** CHECK WITHOUT G-CELL RBLT OF ONE CELL***********
RXTCP:MOTY=RXOTG,CELL=26591;
(CHECK FIRST TG)
RXAPP:MO=RXOTG-37; FOR TG (GET DEVICE POSITION)Radio X-ceiver
Administration Abis Path Status, Print.
RXMDP:MO=RXOTRX-219-0
RADEP:DEV=RBLT-1185; (PUT DEVICE HERE ) DEVICE DATA PRINT
RXMDP:MO=RXOTRX-337-0;
RADEP:DEV=RBLT2-10800;
NTCOP:SNT=ETM2-9;
RADEP:DETY=ALL;
(IF IT COMMES STM2 )
(SHOWS ALL DEVICES IN BSC)
*************** TO CHECK RBLT IS CONNECTED OR NOT WITHOUT G CELL
**********
NTCOP:SNT=ETRBLT-100;
STDEP:DEV=RBLT-3201&&-3231;
CONNECTED)
( ALL DEVICES SHOULD BE NP I.E NOT
********************* CHECK RXOTG GROUP WITHOUT GCELL **************
RXTCP:MO=RXOTG-92;
PRINT)
(RADIO X-CEIVER ADMINISTRATION TG TO CHANNEL GROUP,
RXTCP:MOTY=RXOTG,CELL=47281;
RESULT WILL BE
<RXTCP:MOTY=RXOTG,CELL=47281;
RADIO X-CEIVER ADMINISTRATION
TG TO CHANNEL GROUP CONNECTION DATA
MO
RXOTG-37
CELL
47281
47281
CHGR
0
1
END
************ HOW TO KNOW RBLT DEVICES WITHOUT G-CELL **********
RXMDP:MO=RXOTRX-72-0&&-11;
(GIVES DEVT COPY THAT IN NEXT COMMAND)
RADEP:DEV=RBLT-2317; (GIVES THE RBLT NUMBER)
THEN
NTCOP:SNT=ALL;
(TAKE Vales from radep & see which link e.g RBLT210969)
2ND METHOD
RXMDP:MO=RXOTRX-72-0&&-11;
THEN
(TAKES NUMBER OF RBLT RANGE e.g 2317 TO 2322)
NTCOP:SNT=ALL;
(CHECKS HERE WHICH RANGE IT IS HERE THATS REQUIRED RBLT)
RXAPI ( FOR CONNECTING TG WITH THE RBLT )
RXAPP:MO=RXOTG-111;
DEV
RBLT-3553
RBLT-3554
DCP
1
2
APUSAGE
UNDEF
UNDEF
APSTATE
IDLE
IDLE
64K
NO
NO
TEI
*********HOW TO CONNECT NEW RBLT TO CELL****************
SITE HATED
RXBLI:MO=RXOTG-88,SUBORD,FORCE;(BLOCK ALL)
RXESE:MO=RXOTG-226,SUBORD; ( OUT OF SERVICE)
RXAPP:MO=RXOTG-226;
RXAPE:MO=RXOTG-226,DCP:ALL; (DISCONNECT DEVICES FROM OLD RBLT)
DTBLE:DIP=RBLT81; (NEW RBLT)
NTCOP:SNT=ETRBLT-81; (CHECKING NEW DEVICES)
BLODE:DEV=RALT-7&RBLT-2;(DEBLOCK DEVICES)
OR
BLODE:DEV=RALT-15&&-24;
RXAPI:MO=RXOTG-226,DEV=RBLT-1121&&-1134,DCP=1&&14;
(CONNECT DEVICES)
IF IF IF EDGE TRU THEN ADD 3 DIGITS
rxapp:mo=rxotg-20; AFTER PRINT OUT (ADD THREE E.G DCP 29,30& 31 &
dev=rblt-1758,59,60)
rxapi:mo=rxotg-20,DCP=29,30,31,dev=rblt-1758,1759,1760,res64k;
RXESI:MO=RXOTG-226,SUBORD;
(BRING IN TO SERVICE)
************ DAILY COMMANDS ******************
RXELP:MO=RXOTG-;
RXBLE:MO=RXOTX-70-0&-11;
RXBLI:MO=RXOTRX-70,FORCE;
RXBLI:MO=RXOCF-88,FORCE;
RXBLE:MO=RXOCF-88;
RXMSP:MO=RXOTRX-70-0&&-11;
RXMSP:MO=RXOCF-70;
RXMFP:MO=RXOCF-70,SUBORD,FAULTY;
RXMFP:MO=RXOCF-70;
RXCDP:MO=RXOTG-70;
RLSTP:CELL=38960;
RLSTC:CELL=38960,STATE=HALTED;
RLSTC:CELL=38960,STATE=ACTIVE;
RLSLP:CELL=38960;
DTSTP:DIP=RBLT14;
ALLIP:ACL=A1;
ALLIP:ALCAT=BTS;
ALLIP;
RLCHP:CELL=25101;
RLCHC:CELL=40842,HOP=ON,CHGR=0;
RLCHC:CELL=39464,HOP=ON;
RXTCP:MO=RXOTG-71;
RXTCP:MOTY=RXOTG,CELL=38960;
DTSTP:DIP=RBLT14;
DTBLE:DIP=RBLT2;
RXAPP:MO=RXOTG-37;
RXMDP:MO=RXOTRX-219-0
RADEP:DEV=RBLT-1185;
TPBLE:SDIP=3ETM2,LP=VC12-44;
DTQUP:DIP=RBLT32;
DTQSR:DIP=RBLT32,ES2,SES2,SF;
DTQSR:DIP=RBLT32,ES,SES,SF;
tpcop:sdip=all;T
NTCOP:SNT=ALL;
TPCOP:ETRBLT-100;
STDEP:DEV=RTGPHDV-288&&-319;
EMGEMGRLNRP:CELL=ALL,CELL=42191;
DTSTP:DIP=ALL,STATE=MBL OR WO;
RXMDP:MO=RXOTRX-72-0&&-11;
RADEP:DEV=RBLT-2322;
NTCOP:SNT=ALL;
ALLTe:ALI=0;
SYBUE;
SYBUP:FILE;
;
SYTUC;
SYBUI:DISC;
RXMOP:MO=RXOTG-226;
SYFRI:FID=H'0000-H'996F,BLOCK=RXOTGD,IND=226,FILENUM=1;
TPQSR:SDIP=2ETM2,LP=VC12-20,ES2,SES2,ES;
DTQSR:DIP=ALL,ES2,SES2,SF;
VC12-41
VC12-43
3
2
7
1
2
3
RBLT41
RBLT106
**** SEMI CONNECTION PERMINENT DATA*****
EXSCP:NAME=ALL;
RADEP:DEV=RALT2-2049;
NTCOP:SNT=ETM2-2;
********************** COMMAND LOG BLOCKED *****************
IF WE GOT ALARM LIKE THIS
COMMAND LOG NOT ACTIVATED
*********** FORCE LOADING THE CF ************************
RXPLI:MO=RXOTG-226,UC;
SYCLI;
*********HOW TO CHECK IF LINK IS CASSCATED OR NOT??****
GCELL RBLT NUMBER SPACE | SPACE GREP SPACE BSC5
GCELL RBLT15 | grep BSC33GCELL RBLT15 | grep BSC33
***************HOW TO CHECK IF THE LINK USED OR NOT *******
NTCOP:SNT=ETRBLT-6;
STDEP:DEV=RBLT-6523&&-6985;
IF WE GET CONFIG
LINK USED.
NP THAT MEAN LINK NOT USED AND IF WE GET P THAT MEAN
********************** TO CHANGE THE SOFTWARE VERSION -SITE IS ON
SERVICE****
rxmsc:mo=rxotg-#,swver=b1921r0086;
To change software version in case if site on service after that we will
do rxpli.
rxpli:mo=rxotg-#,uc; to load the software
rxpli:mo=rxotg-#,uc; to load the software
******site out of service and no need to load the soft ware it will load
when we deblock.
rxmoc:mo=rxotg-#,swver=b1921r0086;
rxmoc:mo=rxocf-#,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-1-#,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-2,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-3,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-4,swver=b1921r0086 or default ;
rxmoc:mo=rxotrx-30-5,swver=b1921r0086 or default ;
....in service
....deblock
***********to add freqency******************
rlcfi:cell=4646,dchno=17; to add freqency
rlcfe:cell=4324,dchno=45; to delet frequency if more than on chanell
group we have to
to writ channel group no after frequency.
************** TO CHECK NEW FILE IN FOR BSC UPGRADE******
INMCT:SPG=0;
INFIP:FILE=B4403R013J;
END;
******** TO CHANGE CHAP & SCLD ON/0FF *******
RLACP:CELL=40612; ( TO CHECK SCLD OFF OR WORKING)
RLACP:CEL=40612: ( IT MAKES ON )
RLHPC:CELL=41412,CHAP=1
RLLCP:CELL=41412;
RLLLC:CELL=41412,SCLD=OFF;
*********** CHANGING PRIORITY FROM UL TO OL OR VISE VERSA *********
RLLLC:CELL=3972,SCLDSC=OL;
******************* TO CHECK THE BOARD FAULTS IN BSC (RP/SNT)*******
FOR RP:
REPRI:RP=77;
(TAKES POSITION FROM THIS PUT IN 2ND COMMAND)
REMRI:RP=77,PCB=RPG3;
RECRI:RP=77;
FOR RP:
EXPOP:RP=193;
(TELLS THE RP POSITION)
BLRPI;RP=193;(CHECKS OK NOT WORKING/IF NOT WORKING DEBLOCK AGAIN N NEED
TO REPLACE)
BLRPE:RP=193;
OR
EXRPP:RP=98 TO CHECK THE STATE OF RP
BLRPI:RP=; BLOCK THE RP
BLRPE:RP=; DBLOCK
FOR SNT:
NTBLI:SNT;
BLEMI:EM=(EM=),RP= , RPT= ;
NTBLME;
NTBLE;
ntbli: to block the snt
ntble:to dblock the snt
stdep:dev=; to check the device
ntcop:snt= to print the dev;
rrtbi:dev=,force; to block the device
rrtbe:dev= to d block the dev
CP FAULT
IN CASE OF CP FAULT
1-REPCI
2-REMCI: PCB=POWC,MAG=CPU-B;
3-RECCI
EM FAULT
1 REPRI:RP=38,EM/RP=4;
(RP DIAGNOSIS /TEST RESULT)
2 remri:rp=38,pcb=EMBINTERFACE,EM=4;
3 recri:rp=38,EM=4;
(RP MANUAL INTERVENTION )
( RP PAIR /TEST RESULT)
OR EM FAULT
REPRI:RP=37,EM=7;
remri:rp=37,pcb=EMBINTERFACE,EM=7;
recri:rp=37,EM=7;
THEN CHECK
EXEMP:RP=37,EM=ALL; (ALL SHOULD BE WORKING)
THEN TO CHECK ABL OR WORKING (GPRS)
GSSTP;
GDSTP;
GSSTP:TSM=TSM-B-7;
****IF EM/RP FAILED THEN ********************
EXEMP:RP=160,EM=2;
BLEMI:RP=160,RPT=161,EM=2;
(BLOCK )
BLEME ( DEBLOCK)
********** RP SEPERATION***************************
STEP1:
RXMDP:MO=RXOTRX-61-0&&-11;
(CHECK ALL DEVICED )
RADRP:DEV=RHDEV-801&-1249&-1029&-673&-486&-802;
GET NEW ONE)
STEP2:
FCRWS:RP=279,WS=SEP;
(BLOCK ONE BY ONE )
EXECUTED THEN
STEP3:
BLRPE:RP=279;
(DEBLOCKING ONE BY ONE)
ORDERED
< DEBLOCKING OF RP
RP
279
RESULT
DEBLOCKING PERFORMED
STEP4: IN LAST
RAHII;
EXRPP:RP=279; (CHECK BLOCKED OR NOT)
(RELEASE ALL DEV AND
plldp;
(TO CHECK PROCESSOR LOAD)
FORLOOP RELEASE.(NOT NECESSARILY REQUIRED)
********************* CHECKING CCITT7 LINK DISTURBANCE*****************
DEBLOCKING SLC
C7LAE:LS=2-541,SLC=06;
C7LDP:LS=ALL;
CCITT7 LINK SET DATA
LS
2-855
SPID
X29
ASP
SLC ACL PARMG ST
0 A2
0
C7ST2C-0
10 A2
0
C7ST2C-20
SPID
SDL
C7ST2C-0/RALT-97
C7ST2C-20/RALT-2561
RADEP:DEV=RALT-2561;
DTQUP:DIP=RALT80;
IF ERROR ON LINK REPORT TO TRANIMISSION
SYSTEM NO 3001 + 80 = 3081
BSC6 - X29
THIS FORMAT TO BE REPORTED.
***********************NODE B CHECKING*************************
NE=BSC28,NODE=A
aploc;
raidutil -L logical
raidutil -L physical
prcboot
prcstate
m:
cd images
cd nodea
dir
ipconfig(to check ip network of node a&b)
cluster res
cluster res |findstr -vie online
********HOW TO TAKE BACK UP OF BSC
aploc;
burvackup -o
y
SLI
********************************* HOW TO TAKE APG BACK UP
**********************
prcboot (to reboot NODES)
THERE ARE 2 NODS ON BSC A & B, ONE IS ACTIVE AND ONE IS PASSIVEN,WHICH IS
NOT USED.
WE START BACK UP FROM NODE A AND COPY IT TO B BY THE FOLLOWING PROCESS.
APG Backup ..(copied to the zip file)
Backup should be done from only passive node
prcstate
..(status,ACTIVE/PASSIVE)
hostname
cluster node ..(node status)
cluster res | findstr -ive Online
cluster res
cluster /ver ..(get the version)
STEP1;
burbackup_SAVEDATADISKINFO C:\BUR\BSC21_NODB_20060129.DDI
STEP2:
HOSTNAME
(CHECK HOST PUT DOWN)
DIR\\AP0403121000B\C$\BUR
COPY C:\BUR\BSC21_NOD_B20060129.DDI\\AP0403121000A\C$\BUR\BSC21_NODE_B_20060129.DDI
COPY FILE FROM ACTIVE TO PASSIVE)
Y
NOW IN PASSIVE
(IT WILL
CONNECT NE=BSC21,NODE=A
prcstate
burbackup
(GIVE IMAGE NAME)
BSC21_BKUP_NODEA_20060129
burbackup -src D:\
-imgdest\\AP0403121000A\images\nodeA\BSC21_Node_A_20060802.zip
y
burverify -i
(to verify)
\\AP0501252830C\images\nodeb\BSC25_Node_B_20050802.zip
..
k:
cd k:\images\nodea
dir ..(to verify)
After backup taken from the passive node,
do prcboot in the active node and take backup (while it is passive).
prcboot
********************* BACK UP ALL BSC********************
@ FOR I=
@CONNECT
sytuc;
@NEXT I
@ FOR J=
@CONNECT
sytuc;
@NEXT J
1 TO 20
("BSC{I}")
31 TO 36
("BSC{j}")
************************ CCITT7 LINK SIGNALLING *******
EXSCP:NAME=ALL;
C7LTP:LS=ALL;
( IT WILL SHOW ALL ACTIVE
LINK SET STATE)
C7LDP:LS=ALL; (SHOWS LINK SET DATA)
RADEP:DEV=RALT-1281;
(SHOW DEVICE DATA IN BSC)
if u r not getting ralt number then type
NTCOP:SNT=ALL; FROM THESE WE CAN GET THE RALT
DTQUP:DIP=RALT40; ( CHECK QUALITY IF PROBLEM SAME THEN REPORT)
RALT=40 REPORT LIKE THIS 3001+40
30041
c7lae:ls=2-828,slc=2
c7lai:ls=2-828,slc=2
NWNE
( blocking the device in sig link failure)
(deblocking)
**********************SEIZURE SUPERVISION OF DEVICE IN BSC*********
RASAP; (CHECKS ALL WORKING IDLE)
RASAR:DETY=RALT2;
(RESET RALT)
RASAR:DETY=RALT2;
******************** TRANSMISSION FUNCTION SYNCHOR DIGITAL PATH QUALITY
SUPER RESET***
TPQSR:SDIP=2ETM2 OR 10ETM2 ,LP=VC12-20,BBE,ES2,SES2,ES;
TPQSR:SDIP=2ETM2,LP=VC12-12,SES,BBE,ES2,SES2,ES;
OR
TPQSR:SDIP=10ETM2,ES OR SES,ES2;
******************GROUP SWITCH FAULT ****************
GSSTP:TSM=TSM-A-36;
GSBLI:TSM=TSM-A-36;
GSTEI:TSM=TSM-A-36;
GSBLE:TSM=TSM-A-36;
(CHECK STATE ABL OR WO)
(BLOCK THE UNIT e.g TSM-A-36)
(TEST IF NOT FAULTS FOUND)
(DEBLOCK)
GSBLI:SPM=SPM-A-0-1;
GSTEI:SPM=SPM-A-0-1;
GSBLE:SPM=SPM-A-0-1;
ANOTHER METHOD
GDSTP:UNIT=ALL;
GDBLI:XM-B-0-3;
GDTEI:XM-B-0-3;
GDBLE:XM-B-0-3;
******************* XM BOARD REPLACMENT IN BSC
TO GET THE POSITION IN BSC
EXRPP:RP=258;
EXEMP:RP=258,EM=ALL;
DBTSP:TAB=RPSRPBSPOS;
************* CLEARING FAULTS in APG BSC 21 ON WARD****
APLOC;
ALIST
ACEASE 8788:0
ALLIP;
****************NO CONNECTION /RESETING FROM AT TERMINAL)
RESETTIMG THE PORT
CONNECT TO PARTICAULR BSC
THEN
IMLCT:SPG=O;
ILNTP:PORT=ALL;
ILBLI:PORT=XXXXXX; (PORT OR NP)
ILBLE:PORT=XXXXX;
THE PORT WHICH WAS ABL BEFORE SHOULD BE WO AFTER RESTING
***********************
RADIO TRANSMISSION TRANSCODER AND RATE ADAPTOR FAULT
(BLOCK DECVICES OF SNT BY NTCOP PRINT OUT & THEN BLOCK TESET SNT IN LATS
DEBLOCK DEVICE
ALL SHOULD BE BIZEE IN LAST
1ST METHOD
NTCOP:SNT=RTTF2S-9;
PRINT OUT
SNT
RTTF2S-9
SWITCHING NETWORK TERMINAL CONNECTION DATA
SNTV SNTP
1 TSM-7-14
DIP
DEV
RTTF2D-290&&-319
2ND STEP
RRTBI:DEV=RTTF2D-290&&-319,FORCE; (BLOCK DEVICE FROM NTCOP PRINT OUT ONCE
EXCUTED THEN)
3RD STEP
NTBLI:SNT=RTTF2S-9;
NTTEI:SNT=RTTF2S-9;
NTBLE:SNT=RTTF2S-9;
4TH STEP
RRTBE:DEV=RTTF2D-290&&-319;
STDEP:DEV=RTTF2D-290&&-319 ( ALL STATE SHOULD BE BIZEE)
ANOTHER METHOD)
RADEP:DEV=RTTF2D-2287;
(CHECK DEVICE ABL OR WO)
STDEP:DEV=RTTF2D-2274&&-2303;
RRTBI:DEV=RTTF2D-2274&&-2303,FORCE; ( FROM STDEP TAKE DEV & BLOCK )
NTBLI:SNT=RTTF2S-71; ( THEN BLOCK SNT)
NTTEI:SNT=RTTF2S-71; (TEST)
NTBLE:SNT=RTTF2S-71;(DEBLOCK SNT)
RRTBE:DEV=RTTF2D-2274&&-2303; (IN LAST DEBLOCK DEVICE
)
STDEP:DEV=RTTF2D-2274&&-2303; (IN LAST CHECK ALL SHOULD BE BUSSY)
************ ANOTHER METHOD**********
NTCOP:SNT=RTTF2S-28; (CHECK THE DEVICE)
RRTBI:DEV=RTTF2D-898&&-927; (BLOCK TEST & DEBLOCK)
RRTEI:DEV=RTTF2D-898&&-927;
RRTBLE:DEV=RTTF2D-898&&-927;
IF NOT BLOCKED THEN
STDEP:DEV=RTTGD-1024&&-1040 ( THEN BLOCKED H'' ONE)
THEN BLOCKED DEBLOCK
RRTPP:TRAPOOL=ALL;
RAHII;
IT DIVDED THE POOLS DEVICES.
***********************GROUP SWITCH CLM CONTROL
GSBLI:CLM=CLM-1;
GSTEI:CLM=CLM-1;
GSBLE:CLM=CLM-1;
****************Radio Control Cell, Dynamic BTS Power Control, End
RLBCI:CELL=;
RLBCE:CELL=LIN1;
RLBCP:CELL=;
*************ACTIVATION OF TEST SYSTEM IN APG BSC'S*******************
1 - APLOC;
2- ALDLS (DISPLAY SOURCE )
3- ALDBLK ALD-1
4- ALDTEST -B ALD-1 (TEST INITIATE)
5- ALDTEST -E ALD-1
( TEST END)
**********TEST ALARM IN IOG BSC'S******************
ALLTI:ALI=0;(INITIATE)
ALLTE:ALI=0;
(END)
************* CELL CONNECTING TO MSC**************
MGOCI:CELL=12345,CGI=424-4023(LAC)-61701,MSC=X23;
(FOR OUTER CELL)
MGCEI:CELL=12345,CGI=424-4023(LAC)-61701,MSC=X23; (FOR INNER CELL)
****************** checking BSC CALL LOAD*****
stdsp:dety=ralt2,bsc=own;
******************* IO BLOCKED*****************
ALLIP:ACL:A2; CHECK WHICH IO BLCOKED THEN BLOCK & DEBLOCK
IOBLI:IO=AT-5;
IOBLE:IO=AT-5;
************************* HOW TO CHECK UMTS SITE *****************
RNC=41 TOTAL WORKING SITES =32
TOTAL WORKING CELLS=94
TOTAL AVAILABLE CELLS=136 -- 36 SITES NOT WORKING
RNC=42 TOTAL WORKING SITES =31
TOTAL WORKING CELLS=83
TOTAL AVAILABLE CELLS=89 -- 6 SITES NOT WORKING
ACT CELLHSDPA
( TO ACTIVATE HSDPA)
DEA CELL (HALTED SITE DEACTIVATED)
ACT CELL (ACTIVE CELL)
RST DSP( RESET DSP) IN ONE WFMR WE HAVE 16 DSP ,REV1&2
DSP BRP(CHECK BOARD)
DSP CELL (DISPLAY CELL)
DSP IMALNK(DISPLAY IMLINK)
TO CHECK LINK DSP E1T1
RNC-41 USER NAME=ALI
P= ALI123
RNC-42 USER NAME = ADMIN
PASS = ETSUMTSRNC42
LOOP BREAK:
CONNECT TO RNC & THEN
1-LST NODEB (GET SITE DETAIL e.g U4060 & THEIR SERIAL #, SUBORD& SLOT)
2- LST NODEB
NUMBER)
AGAIN (BY NODEID & PUT SER #, & VERTICAL,& GET IMA LINK
2- DSP E1T1 (PUT SUBRACK NO ,SLOT, & IMA LINK NUMBER E.G 31,32,33)
------HOW TO KNOW RNC 19 ADDRESS FOR IP BASED INTERMITTENT FAILURE-----
CONNECT TO RNC THROUGH MML
LST NODEB (BY NAME CHECK SUBRACK & SUBSYSTEM)
LST ETHIP (CHECK WITH PORT 0&1 SUBSYSTEM 0 PORT 0 & SUBSYSTEM 1 PORT 1)
GIVE THAT IP ADDRESS I.E LOCAL IP ADDRESS IS ADDRESS OF CURRENT RNC IP
OF SITE
************************ TRANSMISSION STM OUTAGE **********
FIRST OF ALL TAKE ALLIP; FOR BSC WHICH IS STM CHNAGE OVER THEN AFTER
FINISH ALLIP
AGAIN TO CHECK ANY ABNORMAL ALARM
THEN CHECK STM IN BSC
PWNSP:SDIP=ALL;
(SHOWS STATUS WHICH ONE STANDBY OR ACTIVE )
PWMSI:SDIP=2ETM2,MS=MS-1;
( TO MAKE STM -MS-O OR 1 ACTIVE)
THEN IN LAST DO TPQSR FOR PARTICAULAR STM WHICH HAS CHNAGED OR SOME
OUTAGE
*** CLEARING SOFWARE ERROR ***
allip:acl=a2;
syrae:rectype=softerr;
********************** HOW TO KNOW DEVICES CONNECTED TO SITES
RXMDP:MOTY=RXOTRX;
RXMDP:MOTY-RXOCF;
RXMDP:MOTY-RXOTS;
IF RANGE NOT IN CF OR TRX THEN FIND IN TS
RADRP:DEV=RHDEV-1254;
FCRWS:RP=XX,WS=SEP;
BLPRE:RP=125;
******************* CHANGING DIVERSITY**********************
CHANGING DIVERSITY IF WE HAVE 1 ANTEENA AND DIVERSITY IS DEFINED AB
e.g RXD=AB TO CHANGE TO RXD=A
HALT SITE FIRST
RXBLI:MO=RXOTRX-3-0,subord,FORCE;
(BLOCK TRU WITH SUBORD)
rxesi:mo=rxotrx-3-0,subord;
RXMop:MO=RXORX-3-0&&-11;
(BRING OUT OF SERVICE )
RXMoc:MO=RXORX-3-1,rxd=a;
(CHECK RXD=AB OR A )
(CHANGE RXD=A OR AB)
THEN DEBLOCK , BRING INTO SERVICE & ACTIVATE
AGAIN
RXMop:MO=RXORX-3-0&&-11; ( NEW RXD WILL BE CHANGED)
********************* CHANGING CONFACT********
FIRST HALT SITE,BLOCK TG WIL SUBORD,BRING OUT OF SERVICE,
THEN CHNAGE CONFACT
RXBLI:MO=RXOtg-70,subord,FORCE;
rxesE:mo=rxotg-70,subord;
rxmop:mo=rxotg-70; (WHICH CONFACT CHECK VALUE )
rxmoc:mo=rxotg-70,confact=3; (CHNAGE VALUE)
;
rxesi:mo=rxotg-70,subord;
RXBLE:MO=RXOtg-70,subord;
ACTIVATE SITE
************* HANGED ALARM IN BSC*********
CHECK
IOSTP;
IF SOME DEVICES ARE WAITING THEN ALARM IN HANGING INVESTIGATE WHICH AT
TERMINAL IS HAVING PROBLEM
THEN EXCUTE COMMAND TO RELEASE ALARM
iostp
clear those devices which are seized
not of waiting status
IOREI;
IOREI:SIZIND=1,IO=AT-0;
IOREI:SIZIND=1,IO=AMTP-12;
if NOT ACCEPTED FAULT CODE 172 INDIVIDUAL NOT OCCUPIED then
IOREI:ioIND=H'9002;
(take H'9002 ) FROM TOP
***************CDU SWAPPED***********
E-GSM FREQUENCIES NEED CDU WITH ARTICLE CODE BFL-****135, DIGITS 135
IS ESSENTIAL, IF CDU SWAPED AND TRX NOT COMING UP IT MEANZ THAT CDU
NOT SUPPORT E-GSM FREQUENCIES, SO REVERT BACK CHNAGES AND BESURE
ARTICEL CODE 135 WITH ATTAHED TO THOSE TRU WHICH IS HAVING E-GSM FREQS
******************* DISTRIBUTED GROUP SWITCH FAULT **************
allip:acl=a2;
gdcop:unit=MUX3-A-12;
exrpp:rp=206;
exemp:rp=206,em=all;
gdblI:unit=MUX34-A-3;
gdTEI:unit=MUX34-A-3;
gdblE:unit=MUX34-A-3;
********************* LVA DIFFERENCE*****************
RLSlC:CELL=20973,lva=60,sctype=ul,chtype=tch;
(FOR A2)
RLSlC:CELL=20973,lva=26,sctype=ul,spv=2,chtype=tch; (FOR A1,TCH FR =2)
***************** HOW TO CONNECT TG TO CELL******************
RXTCI:MO=RXOTG-38,CELL=40522,CHGR=0;
RXTCP:MOTY=RXOTG,CELL=40522;
CONNECTING TG SING VALUE GIVEN BY PROJECT
RXMOC:MO=RXOTF-38,TFMODE=S,TFCOMPNEG=4638;
DISCONNECT TG
RXTCE:MO=RXOTG-38,CELL=40522,CHGR=0;
CONNECT TG TO RBLT
RXAPI=MO=RXOTG-XX,DEV=RBLT-Y&&-K,DCP=1&&((NT+1)*3);
CHANGGING BAND 900 TO 1800 OR VISE VERSA
FIRST BLOCK ALL TRX WITH SUORD
RXMOC:MO=RXOTRX-13-8,BAND=GSM1800;
DO IT ON TX THEN RX
CHANGING ALLOCATION FROM ONE CHGR TO OTRHER
RXMSC:MO=RXOTRX-20-4,CELL=4162,CHGR=1;
************* MSC DEFINITION IN BSC DATA
rrmbp:msc=all;
output
MSC DEFINITION IN BSC DATA
MSC
X13
END
ETRBLT-49
SP
2-548
CNID
BLOC
ABL
********************** REDUCE SDCCH
RLCFP:CELL=4201; (FIND HOW MANY SDCCH)
THEN
RLCCC:CELL=4202,SDCCH=8,CHGR=0;
IN WHICH CHRR IS THERE
************************
NETWORK SYNCHRONIZATION FAULT
PWNSP:SDIP=ALL;
NSBLI:SDIP=4ETM2,MS=MS-0;
NSTEI:SDIP=4ETM2,MS=MS-0;
NSBLE:SDIP=4ETM2,MS=MS-0;
*******************SITE UP NOT STILL SHOWING IN ALV**********
THIS COMMAND WORKS
RLSLE:CELL=41251,SCTYPE=UL;
RLSLI:CELL=41251,SCTYPE=UL;
THEN CHEC STATE OF CELL SHOULD BE YES
**************** IOG BSC RESTART*********
SMALL RESTART
IMMCT:SPG=0;
IMCSP;
END;
SYRSI:NODE=B,RANK=SMALL,SPG=0;
LARGE RESTART
CP OR BSC RESTARTSYREI:RANK=LARGE,EXPL=OTHER-"CPA2_IPA13";
************** STM DOWN FOR SITE
TPCOP:SDIP=ALL;
OR IF STM KNOW THEN
********
TPCOP:SDIP=1ETM2;
CHECK WHICH RBLT 23 WHICH VC VAKLUES THEN
TPSTP:SDIP=1ETM2;
CHECK KLM OR VC WORKING OR ABL
************ SW UPGRADE ********************
COMMANDS TO CHECK THE BTS SW IN BSC
INMCT:SPG=0;
INFIP:FILE=B440R014L;
END;
COLLECT TG ALL IN BSC &
RXMOP:MO=RXOTG-242; TO CHECK WHICH VERSION RUNNIG
RXTCP:MOTY=RXOTG,CELL=38960;
rxmop:moty=rxotg;
(TELL ALL TG IN BSC)
rxmsc:mo=rxotg-229,swver=b4404ro14l;
AFTER GETTING DATA FROM CHA OF ALL BSC TG RUN THIS COMMAND IN OPS IN ONE
TIME
THEN ONCE ITS OVER RUN
RXPLI:MO=RXOTG-1,UC;
THIS RUN IN CHA AND MAXIMUM NUMBER OF TG ARE 16
OTHER INFORMATION IS WRITTNE IN NOTE BOOK
******************** SDCCH ADDITION ***********
rlslp:cell=27781;
rlcfp:cell=27781;
RLCCC:CELL=23541,SDCCH=8,CHGR=0;
RLSLC:CELL=23541,CHTYPE=tch,LVA=24,SCTYPE=UL;
RLCCC:CELL=51641,TN=2&3,CHGR=0;
RLCHC:CELL=27481,CHTYPE=SDCCH,
***********************ADJUSTING CHA
RLSLC:CELL=46283,CHTYPE=TCH,LVA=83;
************************* MISMATCH
CHECK TX POWER BY
RXMOP:MO=RXOTX-203-0&&-11
THEN RLCPP:CELL=42441;
BTSPOWER**********
IF TX POWER IS 47 & CELL POWER IS 40 ,CHNAGE CELL POWER TO 47 ONCE CELL
UP REVERT BACK
40
RLCPC:CELL=42441,BSPWRB=40,BSPWRT=40;
************ GB INTERFACE FAULT OR GPRS LINK FAILURE ******
METHOD TO REPORT TO TEMC
check with rtglt down rtglt0 or 1
then take in which stm it is working then booke with TMC
AND GIVE KLM VALUE ALSO
FORMAT
IF NSVC-1 = BSCN9-RTGLT1 - UP2-3002
NSVC-0 = BSCN9-RTGLT0 - UP2 - 3001
(10ETM2-KLM 353)
DTDIP:DIP=RTGLT1;
TPCOP:SDIP=ALL;(CHECK WHICH STM CARRYING RTGLT 0 OR 1 )
DTDIP:DIP=RTGLT1;
NTCOP:SNT=ETM2-9;
************ DEBLOCKING THE TRANSCIEVER RHSNT******
NTCOP:SNT=ALL;
NTCOP:SNT=RHSNT-23;
(SNT STATUS)
STDEP:DEV= RHDEV-5888&&-5919;
(CHECK WO & MBL DEVICE RANGE )
BLODE:DEV=RHDEV-5888&&-5919;
(DEBLOCKING & THEN CHECK STDEP MUST BE IDLE OR BUSY)
EXDAI:DEV=dev...;
BRINGING INTO SERVICE
************* PCM LINK BLOCKING RALTS *************
SWITHCING WILL GIVE US ONLY PCM NO SO WE HAVE TO TAKE OUT DEV RANGE OF
THAT RALT AND BLOCK.
E.G PCM NO 3006 IT WILL BE -1 RALT 5
3056 RALT WILL BE 55
3055 RALT WILL BE 54
THEN CHECK NTCOP:SNT=ETRALT-5;
GET DEVICE RANGE AND BLOCK
BLODI:DEV=RALT-161&&-191;
STDEP:DEV=RALT161&&-191;
ALL SHOULD BE MBL -IF NOT MBL AND PROINT OUT IS SHOWING SEBU THEN WE HAVE
TO
BLOCK THE SLC OF THAT RALT
E.G
C7LDP:LS=ALL;
TAKE RANGE OF THAT RALT BY
NTCOP:SNT=ETRALT-64;
TEHN RANGE CHECK IN
C7LDP:LS=ALL;
& THEN BLOCK THAT SLC
C7LTP:LS=ALL;
BLOCKING SLC
IN THIS CASE ITS 8
C7LAE:SLC=8,LS=2-7990;
****************** AP FILE PROCESSING FAULT
FAULT IS WHEN SOURCE FILE IS NOT MOVED TO DESTINATION
APLOC;
ALIST
IOSTP;
ACEASE 29090:5
CDHDSLS
CDHVER STSFILEQ1BSC40
CDHVER STSDEST
AFPLS
AFPFTI -c STSDEST -z STSFILEQ1BSC40
AFPFTI -f STSFILEQ1BSC40
AFPFTI -f
******* SYSTEM RESTART ****************
DPWSP: ( AAM MEANZ FAULT & NRM MEANZ OK)
SYRIP:SURVEY;
C7LTP:LS=ALL;
DIRCP;
DIRRP:RP=ALL;
ALLIP;
IMMCT:SP=0;
IMCSP;
***************************** Problem during CP update:
FCECR failed
Solution:
Print FCECP;
Print EXDTP;
From the above print out (EXDTP) do EXDTE
Example:
<fcecp;
NE: BSC19
ID: 7119314
TIME: 10/14/2008
00:25:09
REGIONAL SOFTWARE UNIT CATALOGUE DATA
BLOCK
BN
SUNAME
SUID
SUTYPE CNO STAT
RTTAH1S H'524 RTTAH1SD CXCW 201 010
R1B
DP
8 NOPL
RTTAF1S H'523 RTTAF1SD CXCW 201 011
R1E02
DP
8 NOPL
RTTAF1S H'523 RTTAF1SD CXCW 201 011
R1F01
DP
8 NOPL
<exdtp:block=rttaf1s;
NE: BSC19
ID: 7119306
TIME: 10/14/2008
00:16:56
ORDERED
NE: BSC19
ID: 7119306
TIME: 10/14/2008
00:16:56
TIED DEVICE SOFTWARE UNITS
BLOCK
SUNAME
SUID
RTTAF1S RTTAF1SD CXCW 201 011
RTTAF1SD CXCW 201 011
R1E02
R2B01
exdtp:block=rttah1s;
NE: BSC19
ID: 7119305
TIME: 10/14/2008
00:14:08
NE: BSC19
ID: 7119305
TIME: 10/14/2008
00:14:08
ORDERED
<
TIED DEVICE SOFTWARE UNITS
BLOCK
SUNAME
SUID
RTTAH1S RTTAH1SD CXCW 201 010
R2B01
<exdte:block=RTTAF1S,suid="CXCW 201 011
NE: BSC19
ID: 7119331
TIME: 10/14/2008
EXDTE:BLOCK=RTTAF1S,SUID="CXCW 201 011
ORDERED
<
R1E02";
00:28:04
R1E02";
NE: BSC19
ID: 7119331
TIME: 10/14/2008
00:28:05
DEVICE SOFTWARE UNIT TIE DELETION RESULT
PERFORMED
END
exdte:block=RTTAF1S,suid="CXCW 201 011
NE: BSC19
ID: 7119333
TIME: 10/14/2008
EXDTE:BLOCK=RTTAF1S,SUID="CXCW 201 011
R2B01";
00:28:19
R2B01";
ORDERED
NE: BSC19
00:28:19
NE: BSC19
ID: 7119333
ID: 7119333
TIME: 10/14/2008
TIME: 10/14/2008
00:28:20
DEVICE SOFTWARE UNIT TIE DELETION RESULT
PERFORMED
END
****************** TO CHANGE TGSYNCH
VALUE(TFCOMPNEG)*****************************8
RXBLI:MO=RXOTF-304;
RXESI:MO=RXOTF-304;
RXMOP:MO=RXOTF-304;
RXMOC:MO=RXOTF-304,TFMODE=S,TFCOMPNEG=4778;
************************ TO CHECK APG BSC'S NODE
****************************
APLOC;
IPCONFIG
PRCSTATE
CLUSTER NODE
CLUSTER RES
IPCONFIG
MML
!NE=BSC24,NODE=A!
*************************************************************************
*****
********************* TO CHECK RP NUMBER FOR
BSC*****************************
NSSTP;
PWNSP:SDIP=ALL;
TPCOP:SDIP=4ETM2;
NTDCP:SNT=ETM2-3,SUBSNT=0;
*************************************************************************
*****
*****TO CLEAR THE RADIO TRANSMISSION TRANSCODER & RATE ADAPTER FAULT
**********
NTCOP:SNT=RTTAH1S-12;
RRTBI:DEV=RTTAH1D-386&&-390&RTTAH1D-392&&-400&RTTAH1D-402&&-410&RTTAH1D412&&-415!,FORCE;
NTBLI:SNT=RTTAH1S-12;
NTTEI:SNT=RTTAH1S-12;
NTBLE:SNT=RTTAH1S-12;
RRTBE:DEV=RTTAH1D-386&&-390&RTTAH1D-392&&-400&RTTAH1D-402&&-410&RTTAH1D412&&-415!,FORCE;
***********************************************************
.......... AP FILE PROCESSING FAULT ..................
APLOC;
afpfti -f STSFILEQ1BSC26 (THIS IS TRSNSFER QUE..)
**************
TO CHANGE CHANNEL GROUP OR CHANGE BCCH *********8
RXBLI:MO=RXOTG-226,SUBORD,FORCE;
RXMSC:MO=RXOTRX-226-4&&-7,CELL=45341,CHGR=0;
RXMSC:MO=RXOTX-226-4&&-7,CELL=45341,CHGR=0;
RXMSC:MO=RXOTRX-226-8&&-9,CELL=45341,CHGR=1;
RXMSC:MO=RXOTX-226-8&&-9,CELL=45341,CHGR=1;
RLCFE:CELL=45341,CHGR=1,DCHNO=7&13;
RLCFI:CELL=45341,CHGR=0,DCHNO=7&13;
RXBLE:MO=RXOTG-226,SUBORD;
---------------------------------------------------------------------IF GPRS LINK FAIL REPORT TO TMC
DTSTP:DIP=RTGLT0&RTGLT1;
C7LDP:LS=ALL;
RADEP:DEV=RALT-3001;
TO GET RALT & SLC NUMBER
TO GET RALT
------------------------------------------------------------------------TO GET CIRCUIT NUMBER OF MSC'S
GOT O GCELL WINDOW(TERMINAL WINDOW) AND TYPE
eac_esi_config -ne XG3
--------------------------------------3G COMMANDS
TO FIND THE RNC IS CONNECTED TO WHICH MSC
IN RNC GO TO MAINTANANCE CLIENT AND TYPE LST N7DPC AND EXICUTE
T
TO FIND THE POINT CODE
LST OPC
-------------------------------------------------------------------IF HIGH FAILURE RATE IN SUBRATE SWITCH SUPERVISION FAULT CAME
rxapp:mo=rxotg-57;
THEN U WILLL GET AN OUT PUT, TAKE THE DEVICE THAT UNDEF ONE AND DO
blodi:dev=rblt-1827;
THEN BLOCK THAT SELECT STATE TS
rxbli:mo=rxots-57-0-6;
-----------------------------------------------------------TO REPORT TEMC RBLT FINDING
DTSTP:DIP=RBLT8;
DTDIP:DIP=RBLT8;
TPCOP:SNT=ETM2-0;
TPSTP:SDIP=5ETM2;
AIMOS IP ADDRESS- 10.66.100.65
-------------------------------TO CLEAR SOFTWARE ERRORSYRAE:RECTYPE=SOFTERR;
TO CLEAR APPLICATION ERROR
SYRAE:RECTYPE=APPLERR;
----------------------------------------IF GPRS LINK FAIL REPORT TO TMC
DTSTP:DIP=RTGLT0&RTGLT1;
C7LDP:LS=ALL;
RADEP:DEV=RALT-3001;
TO GET RALT & SLC NUMBER
TO GET RALT
-------------------------------------------------------------------------
TO GET CIRCUIT NUMBER OF MSC'S
GOT O GCELL WINDOW(TERMINAL WINDOW) AND TYPE
eac_esi_config -ne XG3
--------------------------------------3G COMMANDS
TO FIND THE RNC IS CONNECTED TO WHICH MSC
IN RNC GO TO MAINTANANCE CLIENT AND TYPE LST N7DPC AND EXICUTE
T
TO FIND THE POINT CODE
LST OPC
-------------------------------------------------------------------IF HIGH FAILURE RATE IN SUBRATE SWITCH SUPERVISION FAULT CAME
rxapp:mo=rxotg-57;
THEN U WILLL GET AN OUT PUT, TAKE THE DEVICE THAT UNDEF ONE AND DO
blodi:dev=rblt-1827;
THEN BLOCK THAT SELECT STATE TS
rxbli:mo=rxots-57-0-6;
------------ TO BLOCK RALT ----------DTDIP:DIP=RALT139;
NTCOP:SNT=ETM2-5;
TPCOP:SDIP=ETM2-5;
EXSCP:NAME=ALL;
DTBLI:DIP=RALT139;
STDEP:DEV= RALT2-4448&&-4479;
BLODI:DEV= RALT2-4448&&-4479;
DTBLI:DIP=RALT139;
---------------
TO DEBLOCK RALT ----------------
BLODE:DEV= RALT2-4448&&-4479;
DTBLE:DIP=RALT139;
STDEP:DEV=RALT2-RALT2-4448&&-4479;
--------------------------------------------------------AFTER BSC BACK UP WE CAN DO TESTING ALSO BY THE COMMAND
SYBCI:FILE=RELFSW2;
SYRSI:SPG=0,NODE=A,RANK=SMALL;
----------------------------------------------------SOFTWARE LOADING--RXPLI:MO=RXOTG-96,UC;
----------------------
TO RESTART THE BSC NODE ----------
SYBFP:FILE;
IMMCT:SPG=0;
IMCSP;
END;
BLSNE:SPG=0,NODE=A;
SYRSI:SPG=0,NODE=A,RANK=SMALL;
BLSNI:SPG=0,NODE=A;
ALLIP:ALCAT=A1;
IOSTP;
SYRSI:SIZIND=2;
IOREI:SIZIND=2;
IOBLI:IO=AT-3;
SYBCI:FILE=RELFSW2;
BLSNE:SPG=0,NODE=A;
! RESTART NODE B!
SYRSI:SPG=0,NODE=B,RANK=SMALL;
BLSNI:SPG=0,NODE=B;
SYBUP:FILE;
;
ALLIP:ACL=A1;
-----------------------TO CLEAR AP FAULT
CONNECT CHA AS NE=BSC26,NODE=A
THEN TYPE
ALIST
acease 6023:4 (ALARM IDENTIFIER )
--------------------------------------------SOFTARE ERROR
SYRAE:RECTYPE=SOFTERR;
-------------------------------------------TO CHANGE MSC FOR TEST BSCS-
RLTDP:MSC=ALL;
RLTDC:MSC=T1X,MODE=INACTIVE;
RLTDC:MSC=MST,MODE=ACTIVE;
--------------------------------------------TO CLEAR DISTRIBUTED GROUP SWITCH FAULT
GDBLI:UNIT=MUX3-B-32;
GDTEI:UNIT=MUX3-B-32;
GDBLE:UNIT=MUX3-B-32;
GDSTP:UNIT=MUX3-B-32;
---------------------------------------------TO CHECK THE BSC TRAFFIC FLOW
RRTPP:TRAPOOL=ALL;
STBSP:DETY=RALT;
RRMAP:TRAPOOL=ALL;
RRTPP:TRAPOOL=ALL;
STDEP:DEV=RALT2-0&&-127;--- FOR APG BSCs
-----------------------------------------------TO CLEAR SP NODE RESTARTED FAULT
IMMCT:SPG=0;
IMRDP:NODE=BA,,,;
END;
------------------------------------IF RBLT STATE IS NONE THEN CHECK
NTSTP:SNT=ETRBLT-75;
RADEP:DEV=RBLT-75;
NTCOP:SNT= ETRBLT-2;
TPBLE:SDIP=3ETM2,LP=VC12-44;
DTQUP:DIP=Ralt46;
DTQSR:DIP=RaLT46,ES2,SES2,SF;
DTDIP:DIP=RBLT75;
TPCOP:SDIP=ALL;
NTCOP:SNT=ALL;
TPCOP:ETRBLT-100;
----------------------------------RADIO TRANSMISSION TRANSCODER POOL MEAN HOLD TIME SUPERVISION
rrmap:trapool=fr;
-------------------------------------------------------------- DISTRIBUTED GROUP SWITCH FAULT -ALLIP;
DSTP;
GDBLI:UNIT=XM-B-0-1;
GDTEI:UNIT=XM-B-0-1;
GDBLE:UNIT=XM-B-0-1;
-----------------------------------------------------------TO CHECK CP FAULT--1-TO CHECK CP STATE
DPWSP;
IS SBSTATE=WO
IF NO THEN
REPCI;
END OF DIAGONOSIS
REPCE;
-------TO REMOVE THE FAULT MARK FROM THE CP(TO REPAIR THE FAULT)
RECCI;
-------TO REPLACE THE PCB
REMCI;
TO PRINT LIST OF ERRORS IN THE CP
DIRCP;
TO PRINT THE ERRORS FOR ALL RP
DIRRP;
TO TERMINATE THE REPAIR PROCEDURE
REPCE;
---------------------------------------------------------TO CHECK BSC ALARMS.
SYRIP:SURVEY;
--------------------TO CHANGE DTHAMR VALUE
RLDHP:CELL=19501;
---------------------TO RESET LINK COUNTER
DTQUP:DIP=RBLT3;
DTQSR:DIP=RBLT3,ES2,SES2,SF;
DTQSR:DIP=RBLT3,ES,SES,SF;
--------------------ALSO
DTQDP:RBLT98;
DTQHI:RBLT5;
DTQHP:RBLT:RBLT5;
---------------------------------TO RESET RP FOR GPRS FAILURE
RLGRP:CELL=ALL(OR CELLID); TO GET RP CONNECTED TO GPRS.
EXRPP:RP=67; TO GET TYPE OF RP
BLRPI:RP=67,FORCED; TO BLOCK RP
BLRPE:RP=67; TO DEBLOCK
EXRPP:RP=67;
----------------------TO FIND TYPE OF BSC SOFTWARE
aploc;
cpfls
---------------------------TO TAKE BACKUP ON EXTERNAL OD
SYBUE;
SYBUP:FILE;
;
1) Format OD Drive
INMCT:SPG=0;
INMEI:NODE=A,IO=OD-1,FORMAT=APN,VOL=B17020210;
END;
2) Mount OD Drive
INMCT:SPG=0;
INVOL:NODE=A,IO=OD-1;
END;
3) Copy Backup file to OD dRIVE
SYMTP:SPG=0,NODE=A,FILE1=RELFSW2,IO2=OD-1,DIR=OUT;
4) To Check the files in the OD
INMCT:SPG=0;
INFIP:FILE=OD0A1;
END;
*..to verify backup (execute sybci command before sytuc)
sybci:file=RELFSW2;
5) To unload the OD Drive
INMCT:SPG=0;
INVOE:NODE=A,IO=OD-1;
END;
sytuc;
;
sybui:disc;
---------------------------------------------TO DEBLOCK THE RBLT / LINK FOR SITES
RXAPP:MO=RXOTG-233;
STDEP:DEV=RBLT2-7681&&-7711;
BLODE:DEV=RBLT2-7681&&-7711;
EXDAI:DEV=RBLT2-7681&&-7711;
RXMSP:MO=RXOCF-233;
---------------------------------------------MSC COMMAND TO FIND CELLS & LAC
MGOCP:CELL=ALL
---------------------------TO GET CELL BROAD CASTING DETAIS
RLMBP:ID=ALL;
RLMTP:ID=ALL,CELL=ALL;
---------------------------------to test Ts
rxlti:mo=rxots-12-22-3;
--------------------------------------to get BSC details in gcell window type
eac_esi_config -ne BSC21
--------------------TO GET ALL RP STATUS
EXRPP:RP=ALL;
=-=-=-==-===
PRCOESSOR LOAD CHECKING
PLLDP;
------------------------------------------to know which msc connected to mobile sim
MGTRP:MSISDN=971506225603;
-------------------------------------------to find how many calls are ther in bsc
stdsp:dety=ralt2,bsc=own;
-------------------------------------------*************** PCU expansion commands (GPRS )**********
rlgrp:cell=all;
rrgbp:detail
rrgbp:detail;
rlgrp:cell=2181;
ntcop:snt=all;
ioexp;
radrp:dev=rtgphdv-17953;
rapti:dev=rtgphdv-17980;
stdep:dev=rtgphdv-17920&&-17983;
rapti:dev=rtgphdv-17981;
rxmop:mo=rxotrx-152-0;
rrpcp:rpinfo;
-----------------------------------------------------********
TO check STM status (STM DOWN OR NOT)************
tpstp:sdip=4etm2
-----------------------------------------RLTDP:MSC=ALL;
MGCEP:CELL=XXX;
RRPLP:RPINFO;
---------------------------TO GET BCCH & BSIC VALUE OF CELL
RLDEP:CELL=Z51270;
------------------------------TO CHECK THE BACK UP STATUS
SYBFP:FILE;
---------------------------WIBAS - (WIRELESS INTRACOM BROADBAND ACCESS SYSTEM)
-----------------------------------------------TO SPLIT RP AND
CLEARING SHIFTING FAULT IN BETWEEN TRUS
RXMDP:MO=RXOTRX-23-0;
RADRP:DEV=RHDEV-817;
EXEMP:RP=10,EM=ALL;
FCRWS:RP=100,WS=SEP;
BLRPE:RP=100;
EXRPE:RP=ALL;
RAHII; --- TO DISTRIBUTE TRH LOAD
---------------------------if hardware fault shifting, then check...
rahhp:snt=all;
rahep:noint=3;
rahii;
--------------cfind cell=27071 -date 2010-07-26
----------------------to clear Referance clock source abnormal alarm
LST
DSP
SET
MOD
SET
DSP
ALMAF
CLKSTAT
CLKMODE ......free running
CURRDA ....centrDA = Current DA
CLK MODE ---mannual IP CLK
CLKSTAT... Normal , mannual
-----------------------------------------------*****SIZE ALTERATION OF DATA FILES SIZE CHANGE REQUIRED******
RXMSP:MO=RXOCF-139;
RXTCP:MO=RXOTG-19;
RLCRP:CELL=ALL;
SYRIP:SURVEY;
RRTPP:TRAPOOL=ALL;
STDSP:DETY=RALT15,BSC=OWN;
RLCRP:CELL=ALL;
NTSTP:SNT=SRS-7;
NTCOP:SNT=ALL;
NTCOP:SNT=ALL;
DBTSP:TAB=SAACTIONS;
SAAEP:SAE=466;
RXASP:MOTY=RXOTG;
SAALI;
GDCVP;
NSSTP;
TPSTP:SDIP=ALL;
ALLIP;
RLSTP:CELL=ALL,STATE=HALTED;
C7LTP:LS=ALL;
C7SPP:SP=ALL;
RLSLP:CELL=10721;
****************************************
DATA OUTPUT, AP COMMON DESTINATION HANDLING, DESTINATION FAULT
****************************************************************
****** CCITT7 EVENT REPORTING THRESHOLD REACHED *************
1)Print the CCITT7 event reporting data:
-C7ESP:ENUM=29;
2)Reset the alarm:
-C7ERR:ENUM=29;
3) End the CCITT7 event reporting:
-C7ERE
4) Change the event reporting data
- C7ESC
5) Initiate the CCITT7 event reporting:
- C7ERI
********************************************************
*********EXCHANGE INPUT LOAD SUPERVISION*********
This alarm will come whenever processor load is high. immidiatly do the
command
PLLDP;
*******************************
to delete neibour reltion
RLNRE:CELL=Z20290,CELLR=41923;
******************************
TO CHECK THE BSC TRAFFIC
RRTPP:TRAPOOL=ALL;
**************************
TO CHECK THE CORRECTION SOFTWARE IN THE SYSTEM
PCORP:BLOCK=ALL (BLOCK NAME);
***************************8
TO CHECK THE HW FOR BSC
EXHWP:CP;