NETCOM LAB CAT EXAMINATION NAME: AKSHAT RASTOGI REG.NO – 19BCE2220 Question 1 Create a star topology by connecting 4 PCs to a (i) HUB Sending data from pc1 to pc3 Here we are sending data from pc1 to pc3 since the configuration starts from 0 SIMULATION PANEL Verifying the connectivity from pc1 to pc3 by using ping command 3. In a hub connection, who receives the packet when data is send from PC2 In a hub every pc connected to the hub will receive the packet sent from pc2 i.e pc0,pc1,pc3 since when a packet arrives at one port,it is copied to the other ports so that all segments of the Lan see all the packets. SWITCH Create a star topology by connecting 4 PCs to a (ii) Switch Send data from PC2 to PC4 and verify if data can be sent, and show the results (screenshot) Here I have send data from pc1 to pc3 since the configuration starts from 0. SIMULATION PANEL In a switch connection, who receives the packet when data is send from PC2? In a switch only pc3 will receive the packet sent from pc1 since it does unicasting and has a memory. Verifying the connectivity from pc1 to pc3 through ping command 2. Create two LAN network as shown below perform static routing. Show the routing table and ARP tables of the two routers. (screen shot of the routing and ARP tables). Solution: NETWORK CONFIGURATION SIMULATION PANEL Routing Table for Router 0 ROUTING TABLE FOR ROUTER 1 ARP TABLE FOR ROUTER 0 ARP TABLE FOR ROUTER 1