Simulation on Y-axis
CNC




190980
190992
191001
191031
Model
Simulation model
• We will apply a distributed force at the center of
all supporting profiles to measure maximum
deflection.
Supporting rod
Length = 5 feet
Diameter = 25mm
Sliding rails
Length = 5 feet
Diameter = 20mm
Aluminum profile
Length = 5 feet
Height = 40mm
Width = 40mm
Force = 50N
Maximum deflection in 40 by 40 mm support profile = 0.14mm
Maximum deflection in 25mm supporting rod = 0.23mm
Force = 150N
Maximum deflection in 40 by 40mm support profile = 0.26mm
Maximum deflection in 25mm supporting rod = 0.34mm
Force = 300N
Maximum deflection in 40 by 40 mm support profile = 0.43mm
Maximum deflection in 16 mm supporting rod = 0.52mm
Force = 400N
Maximum deflection in 40 by 40 mm support profile = 0.54mm
Maximum deflection in 25 mm supporting rod = 0.64mm