PEDESTRIAN PIPE & HOSE R AMPS
Product Description
Typical Applications
SafetyGrip anti-slip pipe & hose ramps are constructed from
heavy duty fire retardant polyester resins which incorporate our
diamond hard aggregate surfaces. These FRP pipe & hose ramps
are extremely robust and hard wearing and offer superb levels
of traction even in the harshest of environments.
• Portable Cable Covers
• Pipe & Hose Protection
• Portable for use around worksite
SafetyGrip pipe and hose ramps are available as two standard
designs that allow them too bridge single or double pipe runs,
each cover has excellent chemical, corrosion and fire retardency
properties they are designed to withstand the demands of an
offshore/marine environment. Supplied in a variety of standard
sizes, with bespoke customised sizes readily available.
Benefits
•
•
•
•
•
•
Heavy Duty/High Traction
Non-Corrosive
Excellent Impact Resistance
Fully Guaranteed
Lightweight & Portable
Easy Installation
PEDESTRIAN PIPE & HOSE R AMPS
Options
Sizes
Available as single or double pipe profiles, a full range of standard and
custom sizes are available, typical length 1000mm.
Weights:
S TA N D A R D S I Z E S
Type
Single
Double
1” (25mm)
2kg
2.5kg
2” (50mm)
3.5kg
4kg
Single (SPR)
Double (DPR)
4” (100mm)
7.5kg
9kg
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
6” (150mm)
11kg
16kg
8” (200mm)
13.5kg
19kg
25mm (1”)
50mm (2”)
100mm (4”)
150mm (6”)
200mm (8”)
(Weights based on 1000mm length ramp)
Test Data
Fire Testing:
BS476 Part 7, CLASS 2
EN ISO 11925-2
BS EN ISO 9293-1
Single
Ramps
8”
6”
4”
2”
1”
Double
Ramps
8”
8”
6”
6”
4”
4”
2” 2”
1”
1”
Colours
Typically supplied with a high visibility colouring - Yellow and Black
Chevrons; Custom colours are available on request.
Chemical Resistance:
Various chemical compounds including most commonly used water
& oil based drilling muds and fluids.
Anti-slip Grades
Coefficient of Friction Grip Test:
Friction test carried out using the pendulum CoF test Result show result between 0.85 - 0.95 wet and dry.
SURFACE GRADES
CODE
GRIT SIZE
APPLICATION
Fine
FG
2mm ( 1 / 16 ”)
Light Industrial
Coarse
CG
4mm ( 3 / 16 ”)
General Industrial
Extra Coarse
XCG
6mm ( 1 / 4 ”)
Heavy Duty Industrial
Installation
SafetyGrip Anti-slip Pipe & Hose Ramps are designed to be portable
and used for temporary application, typically laid in place for easy
removal later.
Specification
Physical Data
Finish:
Rigid pre-formed shaped composite section
Grit Type:
Blended Aluminium Oxide/Granite
Nominal Thickness:
12mm
Water/Chemical Absorption:
Less than 0.1%
Temperature Range:
-35 deg C to +95 deg C
Transportation/Classification
Anti-slip pipe & hose ramps are classed as non-hazardous and can be
shipped through conventional methods.
Maintenance
Cleaning
Anti-slip surfaces should be cleaned at intermittent intervals to ensure
they offer optimum performance, wash with water based detergent, stiff
brush or high pressure washers/steam cleaners.
If in any doubt about an application please contact SafetyGrip Technical
Services on: +44(0)1224 784700 info@safetygripsolutions.com
Safety Grip Solutions Limited
Unit 1 Cairnrobin Pipeyard, Marywell, Portlethen,
Aberdeen AB12 4SB
info@safetygripsolutions.com Tel: +44 (0)1224 784700
www.safetygripsolutions.com
VEHICLE PIPE & HOSE R AMPS
Product Description
Typical Applications
SafetyGrip vehicle ramps are designed for use around the worksite,
quick and easy to deploy they offer protection for all types of
Cable, Pipe and Hoses that may be running across the ground.
• Electrical Cable Protection
• High Pressure Hose Protection
• Temporary & Fixed Access Solutions
Each ramp is constructed from heavy duty reinforced
polyurethane which provides a strong and robust solution even
for heaviest vehicle movement. Designed to be load bearing up
to 10,000kg axle weight, these ramps will provide safe passage
for regular heavy vehicular traffic.
•
•
•
•
SafetyGrip cable and hose cover are available as two standard
designs that allow them too bridge single or double cable/
hose runs, each cover has excellent chemical, corrosion and
fire retardency properties they are designed to withstand the
demands of an industrial environment.
Supplied in a variety of standard sizes, with bespoke
customised sizes readily available.
Benefits
Heavy Duty/High Traction
Non-Corrosive
Portable & Easy Installation
For Vehicles with axle weight up to10,000kg
VEHICLE PIPE & HOSE R AMPS
Options
Specification
Sizes
Available as single or double slot profiles, a full range of standard sizes
are available along with bespoke custom designed applications, typical
length 1000mm.
Physical Data
Finish:
Rigid pre-formed shaped PU section
S TA N D A R D S I Z E S
25mm (1”)
50mm (2”)
Single (SVR)
Double (DVR)
✓
✓
✓
✓
Single Slot Ramps
Tear resistance:
65.1 N/mm2 (DIN53356)
Tensile Strength:
21.0 N/mm2 (DIN53455)
Shore Hardness:
94A (DIN EN ISO 868)
Water/Chemical Absorption:
Less than 0.1%
Temperature Range:
-35 deg C to +95 deg C
Weights:
Double Slot Ramps
Type
Single
Double
1” (25mm)
23kg
22kg
2” (50mm)
36kg
35kg
(Weights based on 1000mm length ramp)
Test Data
Fire Testing:
EN ISO 11925-2
BS EN ISO 9293-1
Chemical Resistance:
Various chemical compounds including most oils, petroleum based
fluids and the drilling muds,
Colours
Typically supplied with a high visibility colouring - Yellow and Black
Chevrons; Custom colours are available on request.
Coefficient of Friction Grip Test:
Friction test carried out using the pendulum CoF test Result show result between 0.75 - 0.85 wet and dry.
Anti-slip
Each ramp incorporates SafetyGrip’s unique high traction anti-slip
surface, this ensures sufficient traction for heavy vehicles
Transportation/Classification
Installation
Maintenance
SafetyGrip Anti-slip Pipe & Hose Ramps are designed to be portable
and used for temporary application, typically laid in place for easy
removal later.
However permanent fixture can be achieved using mechanical fixings
or adhesive.
Anti-slip pipe & hose ramps are classed as non-hazardous and can be
shipped through conventional methods.
Cleaning
SafetyGrip vehicle ramps should be cleaned at intermittent intervals
to ensure they offer optimum performance, wash with water based
detergent, stiff brush or high pressure washers/steam cleaners
If in any doubt about an application please contact SafetyGrip Technical
Services on: +44(0)1224 784700 info@safetygripsolutions.com
Safety Grip Solutions Limited
Unit 1 Cairnrobin Pipeyard, Marywell, Portlethen,
Aberdeen AB12 4SB
info@safetygripsolutions.com Tel: +44 (0)1224 784700
www.safetygripsolutions.com