FACULTY OF APPLIED SCIENCES DIPLOMA IN SCIENCE (AS120) LABORATORY REPORT ASSESSMENT (10%) GUIDE FOR MODERN PHYSICS (PHY310) CRITERIA/MARKS ITEM 1 2 Objective (Conceptualisation) The objective is not written at The objective is clearly written. all. Methodology (Conceptualisation) The sketch or the description alone is present. A clear drawing of the experimental A setup drawing is present but setup is shown, description is the description of experiment is sequently written. not clear enough to reach to the objectives. Presentation of data (Implementation) Analysis of data (Analysis) 3 Number of data is appropriate but Data is relevant; number of data is not tabulated. appropriate and tabulated properly. . All calculations are presented using the correct formulae and dimensions. Incorrect transfer of data or Graph is presented but some of the major errors. items are missing. Graph is drawn with a title, suitable Wrong calculation or missing Correct formulae are used but with scale, labelled axes, the best fit line some. minor errors. drawn and the gradient obtained, errors are determined when needed. Incomplete data AS120/PHY310/LabReportRubric/FSG MARKS FACULTY OF APPLIED SCIENCES DIPLOMA IN SCIENCE (AS120) LABORATORY REPORT ASSESSMENT (15%) FOR MODERN PHYSICS (PHY310) CRITERIA/MARKS ITEM 1 Discussion (Evaluation/ Selection) Conclusion (Synthesis & Evaluation) 2 General assumption of possible Justification does not really support errors. No suggestion to the the results but suggestion is made to improvement method or no improve the handling of the discussion at all. experiment. 3 MARKS Results are justified scientifically, deviation from the theoretical value is discussed and suggestions on the improvement of the experiment are made. Conclusion is stated according to the Conclusion is far from the objective, results are written with the objectives or not written at all. uncertainties. TOTAL MARKS AS120/PHY310/LabReportRubric/FSG /15