NTPC LIMITED
BILLING BREAK-UP FOR EX-WORK (INDIA) SUPPLY OF MAIN EQUIPMENT - SECOND CONTRACT
PROJECT: MEJA TPP (2 X 660 MW)
PACKAGE : ASH HANDLING SYSTEM
CONTRACTOR: M/s TECPRO SYSTEMS LIMITED, PUNE
COA No.: MUNPL/C&M/Contracts/12-13/SC-COA-0060 Dtd. 17.08.2012
BBU No. : CS-0360-162-2-SC-BBU-E-AMDT-01
Date: 27.02.2013
BBU NO.
BBU VALUE
UNIT RATE
TOTAL
(IN INR)
(IN INR)
QTY.
UNIT
10
11000
MT
NOS.
400,000
109
4,000,000
1,199,000
2
SETS
400,000
800,000
12
12
12
NOS.
NOS.
NOS.
600,000
100,000
650,000
7,200,000
1,200,000
7,800,000
12
SETS
200,000
2,400,000
1.08
1.09
1.10
1.11
FEED GATE ALONG WITH CYLINDER
AIR OIL CONVERTER TANK
CLINKER GRINDER WITHOUT DRIVE UNIT
DRIVE UNIT FOR CLINKER GRINDER (1 SET CONSISTS OF DRIVE MOTOR,
FLUID COUPLING & GEAR BOX AND BASE FRAME)
FEED SUMP BELOW CLINKER GRINDER
JET PUMP
COUPLINGS FOR JET PUMP SUCTION
COUPLINGS FOR JET PUMP DISCHARGE
12
12
12
12
NOS.
NOS.
NOS.
NOS.
125,000
200,000
5,000
5,000
1,500,000
2,400,000
60,000
60,000
1.12
CASTABLE REFRACTORY
1
LOT
4,500,000
5000
Mtrs.
7,900
176
12
12
84
200
NOS.
NOS.
NOS.
NOS.
Nos.
17,500
22,000
15,500
17,500
5,000
4
4
4
NOS.
NOS.
NOS.
600,000
150,000
500,000
3,080,000
264,000
186,000
1,470,000
1,000,000
‐
2,400,000
600,000
2,000,000
85,000
340,000
1.00
1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.13
1.14
1.14.01
1.14.02
1.14.03
1.14.04
1.15
2.00
2.01
2.02
2.03
DESCRIPTION
MECHANICAL
BOTTOM ASH SYSTEM
STAINLESS STEEL SEAL TROUGH FOR BOTTOM ASH HOPPER
REFRACTORY ANCHORS FOR BOTTOM ASH HOPPER
ACCESSORIES FOR BOTTOM ASH HOPPER [01 SET OF ACCESSORIES
CONSISTS OF: OVERFLOW LOUVER (OF) [PART NO.8]= 03 NOS, MAKE UP
CONNECTION [PART NO.9]= 03 NOS, POKE HOLE IN BAH [PART NO.12]= 06
NOS, INSPECTION WINDOW (IW) [PART NO.14]= 08 NOS, JETTING NOZZLES
EJN1 TYPE [PART NO.16]= 08 NOS, JETTING NOZZLES EJN2 TYPE [PART
NO.17]= 16 NOS, ARCH BREAKING NOZZLES TYPE ABN1 [PART NO.18]= 24
NOS, FEED GATE NOZZLES FGN1 [PART NO. 19]= 12 NOS, ACCESS DOOR
[PART NO.21]= 03 NO., OVERFLOW WEIR BOX [PART NO.24]= 02 NOS, SEAL
TROUGH JETTING NOZZLES = 28 NOS. REFRACTORY COOLING PIPE = 28
NOS.]
200 NB BASALT LINED PIPE FOR BA SLURRY UPTO SUMP
BASALT LINED FITTINGS FOR BA SLURRY UPTO SUMP
45 DEG. BENDS
90 DEG. BENDS
20 DEG. BENDS
70 DEG. BENDS
PIPE COUPLING FOR BA SLURRY LINE
BOTTOM ASH OVERFLOW TRANSFER SYSTEM
BOTTOM ASH OVERFLOW PUMP
GEAR BOX FOR BOTTOM ASH OVERFLOW PUMP
FLUID COUPLING FOR BOTTOM ASH OVERFLOW PUMP
Quantification of lot will be submitted later
4,500,000 on after approval & finalisation of detailed
engineering.
39,500,000
2.04
PNEUMATIC OPERATED KNIFE GATE VALVE AT BAOF PUMP SUCTION
4
NOS.
2.05
PNEUMATIC OPERATED KNIFE GATE VALVE AT BAOF PUMP DISCHARGE
4
NOS.
85,000
340,000
2.06
SLUDGE PUMPS
2
NOS.
100,000
200,000
2.07
PNEUMATIC OPERATED KNIFE GATE VALVE AT SLUDGE PUMP SUCTION
2
NOS.
13,000
26,000
2.08
PNEUMATIC OPERATED KNIFE GATE VALVE AT SLUDGE PUMP DISCHARGE
2
NOS.
12,500
25,000
2.09
2.10
CHECK VALVE AT BAOF WATER PUMP DISCHARGE
CHECK VALVES AT SLUDGE PUMPS DISCHARGE
4
2
NOS.
NOS.
120,000
12,000
480,000
24,000
2.11
400NB X 6.35THK. MS ERW PIPES FOR BA OVERFLOW TO SETTLING TANK
1000
MTRS.
2,600
2,600,000
3.00
3.01
3.02
3.03
3.04
3.05
3.06
3.07
AIR PRE‐HEATER ASH SYSTEM
ADAPTERS BELOW APH HOPPER
CHAIN WHEEL OPERATED ISOLATION VALVE
200NB PNEUMATIC OPERATED ASH INTAKE VALVE
200NB AIR INTAKE VALVE
250NB PNEUMATIC BRANCH ISOLATION VALVE
PIPE COUPLING FOR ASH INTAKE VALVE
SLEEVE COUPLING FOR BRANCH ISOLATION VALVE
8
8
8
4
4
16
8
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
5,000
17,500
65,000
70,000
170,000
4,000
11,000
‐
40,000
140,000
520,000
280,000
680,000
64,000
88,000
3.08
ADAPTER TYPE COUPLING FOR AIR INTAKE VALVE [ 1 SET CONSISTS OF 1
PAIR EACH OF SPLIT FLANGE AND CONNECTOR [PART NO. 1], 1 NO. OF
ADAPTER MARK 222A [PART NO.2] , 1 NO. OF 3MM THK. GASKET PART NO.
3 , 1 NO. OF FLANGE MARK 222A [PART NO.4] AND 1 NO. OF GASKET MARK
222A [PART NO.5] AND 6 NOS. OF M16 X 150MM LONG HEX BOLT WITH 2
NOS. OF NUTS AND WASHERS [PART NO. 6]]
4
NOS.
8,000
32,000
Page 1 of 6
REMARK
BBU NO.
DESCRIPTION
3.10
SPLIT TYPE COUPLING FOR ASH INTAKE VALVE [ 1 SET CONSISTS OF 2
HALVES OF SPLIT FLANGE [PART NO.1] , 2 SEGMENTS OF CONNECTOR
[PART NO. 2] , 2NOS. OF 3 MMTHK. GASKET [PART NO. 3] AND 12 NOS. OF
M18 X 75 LONG HEX BOLT WITH 2 NOS. OF HEX. NUT AND SPRING
WASHER]
200 x 250 NB expander
3.11
ALLOY CI FITTING/CAST BASALT FITTINGS
3.12
4.00
4.01
4.02
4.03
4.04
PIPE COUPLING FOR CONVEYING LINE
FLY ASH SYSTEM (VACUUM CONVEYING SYSTEM )
ADAPTORS BELOW ESP HOPPERS
CHAIN WHEEL OPERATED HOPPER ISOLATION VALVE
MATCH PIECE BELOW HOPPER ISOLATION VALVE
AIR INTAKE VALVES
4.05
ADAPTER TYPE COUPLING FOR AIR INTAKE VALVE [ 1 SET CONSISTS OF: 1
PAIR EACH OF SPLIT FLANGE AND CONNECTOR [PART NO. 1], 1 NO. OF
ADAPTER MARK 222A [PART NO.2] , 1 NO. OF 3MM THK. GASKET PART NO.
3 , 1 NO. OF FLANGE MARK 222A [PART NO.4] AND 1 NO. OF GASKET MARK
222A [PART NO.5] AND 6 NOS. OF M16 X 100MM LONG HEX BOLT WITH 2
NOS. OF NUTS AND WASHERS [PART NO. 6]]
3.09
4.06
4.07
4.08
200NB PNEUMATIC OPERATED ASH INTAKE VALVE
SPLIT TYPE COUPLING FOR ASH INTAKE VALVE [ 1 SET CONSISTS OF: 2
HALVES OF SPLIT FLANGE [PART NO.1] , 2 SEGMENTS OF CONNECTOR
[PART NO. 2] , 2NOS. OF 3 MMTHK. GASKET [PART NO. 3] AND 12 NOS. OF
M18 X 75 LONG HEX BOLT WITH 2 NOS. OF HEX. NUT AND SPRING
WASHER]
250NB PNEUMATIC BRANCH ISOLATION VALVE
4.08(a) 200 NB CI pipe for APH hoppers
4.09
4.10
4.11
4.12
200NB CAST IRON PIPE
250NB CAST IRON PIPE
VACUUM BREAKER
VACUUM PUMPS WITHOUT DRIVE MOTOR
250NB PNEUMATIC OPERATED FLY ASH HEADER VALVE AT THE INLET OF
4.13
BUFFER HOPPER [SEGREGATION VALVE]
200NB PNEUMATIC OPERATED FLY ASH HEADER VALVE AT THE INLET OF
4.14
VACUUM PUMP [SEGREGATION VALVE]
4.15 250NB MS ERW PIPE FROM BUFFER HOPPER TO VACUUM PUMP
4.16 PIPE COUPLINGS FOR FLY ASH CONVEYING LINE
4.16.01 200NB PIPE COUPLING
4.16.02 250NB PIPE COUPLING
4.17 PIPE COUPLING FOR FLY ASH INTAKE VALVE
4.18 SLEEVE COUPLING FOR BRANCH ISOLATION VALVE
4.19 200 x 250 NB expander
4.20
ALLOY CI FITTINGS & BENDS FOR FLY ASH CONVEYING LINE
5.00
5.01
5.06
5.07
5.08
FLY ASH SYSTEM ( PRESSURE CONVEYING SYSTEM )
BUFFER HOPPERS
FLUIDIZING PAD FOR BUFFER HOPPER
(1 SET CONSISTS OF 5 Pads)
PULSE JET TYPE SOLENOID VALVES FOR BUFFER HOPPER
(1 SET CONSISTS OF 11 NOS.)
FILTER BAGS FOR BUFFER HOPPER
(1 SET CONSISTS OF 87 NOS.)
CAGE WITH VENTURY FOR BUFFER HOPPER
(1 SET CONSISTS OF 87 NOS.)
FLUIDIZING BLOWER FOR BUFFER HOPPER
HEATERS FOR FLUIDIZING BLOWERS FOR BUFFER HOPPER
MANUAL OPERATED ISOLATION VALVE BELOW BUFFER HOPPER
5.09
5.10
5.11
5.12
5.13
5.14
5.15
5.16
5.02
5.03
5.04
5.05
BBU VALUE
UNIT RATE
TOTAL
(IN INR)
(IN INR)
QTY.
UNIT
8
NOS.
2,000
16,000
8
nos.
12,000
96,000
1
LOT
750,000
350
NOS.
2,000
192
192
192
24
NOS.
NOS.
NOS.
NOS.
6,000
17,500
6,000
35,000
24
NOS.
4,000
96,000
192
NOS.
65,000
12,480,000
192
NOS.
2,000
384,000
24
NOS.
85,000
2,040,000
1
lot
1300
160
24
24
MTRS.
MTRS.
NOS.
NOS.
3,950
4,380
65,000
600,000
24
NOS.
85,000
2,040,000
2,500,000
Quantification of Lot will be submitted later
750,000 on after approval & finalisation of detailed
engineering.
700,000
‐
1,152,000
3,360,000
1,152,000
840,000
Quantification of Lot will be submitted later
2,500,000 on after approval & finalisation of detailed
engineering.
5,135,000
700,800
1,560,000
14,400,000
24
NOS.
85,000
2,040,000
550
MTRS.
2,000
216
50
192
48
24
NOS.
NOS.
NOS.
NOS.
NOS.
4,000
5,000
13,200
14,600
12,000
1,100,000
‐
864,000
250,000
2,534,400
700,800
288,000
1
LOT
2,250,000
Quantification of Lot will be submitted later
2,250,000 on after approval & finalisation of detailed
engineering.
‐
28,800,000
24
NOS.
1,200,000
120
NOS.
9,000
1,080,000
24
SETS
100,000
2,400,000
24
SETS
100,000
2,400,000
24
SETS
250,000
6,000,000
4
4
48
NOS.
NOS.
NOS.
400,000
100,000
15,000
1,600,000
400,000
720,000
PNEUMATIC OPERATED ASH INLET VALVES ABOVE AIR LOCK VESSEL
48
NOS.
80,000
3,840,000
AIR LOCK VESSELS
PNEUMATIC OPERATED AIR INLET VALVES FOR AIR LOCK VESSEL
PNEUMATIC OPERATED ASH DISCHARGE VALVES
PNEUMATIC OPERATED VENT VALVE FOR AIR LOCK VESSEL
AIR RECEIVER FOR TAC
REFRIGERANT TYPE AIR DRYER FOR TAC
FLOW CONTROL VALVE FOR TAC LINE
48
48
48
48
10
10
8
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
500,000
20,000
100,000
65,000
500,000
2,000,000
150,000
24,000,000
960,000
4,800,000
3,120,000
5,000,000
20,000,000
1,200,000
Page 2 of 6
REMARK
BBU VALUE
UNIT RATE
TOTAL
(IN INR)
(IN INR)
BBU NO.
DESCRIPTION
QTY.
UNIT
5.17
200 NB 6.35 thk MS PIPE FOR TRANSPORT AIR LINE FROM TAC TO AIR LOCK
VESSEL
550
MTRS.
5.18
PIPE COUPLINGS
1
LOT
7,000,000
5.19
ALLOY CAST IRON FITTINGS & BENDS FOR CI PIPES/CAST BASALT FITTINGS
1
LOT
8,500,000
5.20
FLY ASH CONVEYING PIPES FOR AIR LOCK VESSEL TO SILO
(250NB & 300NB)
5.21
DOUBLE DISC TYPE VALVE FOR FLY ASH DISTRIBUTION TO HCSD SILO
6.00
6.01
6.02
6.03
6.04
11000 MTRS.
ASH SLURRY DISPOSAL SYSTEM
PLUG GATES FOR SLURRY SUMP
ASH SLURRY DISPOSAL PUMPS
FLUID COUPLING FOR SLURRY PUMP DRIVE
GEAR BOX FOR SLURRY PUMP DRIVE
PNEUMATIC OPERATED KNIFE GATE VALVE AT THE SUCTION OF ASH
6.05
SLURRY PUMP
PNEUMATIC OPERATED KNIFE GATE VALVE AT THE DISCHARGE OF ASH
6.06
SLURRY PUMP
6.07 MANUALLY OPERATED PLATE VALVE OVER ASH DYKE AREA
6.08 DRAIN SUMP PUMP [ASH SLURRY PUMP HOUSE AREA]
6.09 ASH SLURRY SUMP LINERS:
6.09.01 LINER TYPE A1
6.09.02 LINER TYPE A5
6.09.03 LINER TYPE A8
6.09.04 LINER TYPE A9
6.09.05 LINER TYPE A10
6.09.06 LINER TYPE A12
6.09.07 LINER TYPE A13
6.09.08 LINER TYPE A14
6.09.09 LINER TYPE A15
6.09.10 LINER TYPE A16
6.09.11 LINER TYPE A17
6.09.12 LINER TYPE A18
6.09.13 LINER TYPE A29
6.09.14 LINER TYPE A30
6.09.15 LINER TYPE A35
6.09.16 LINER TYPE A40
6.09.17 LINER TYPE A41
6.09.18 LINER TYPE A42
6.09.19 LINER TYPE 1
6.09.20 LINER TYPE 2
6.09.21 LINER TYPE 3
6.09.22 LINER TYPE 4
6.09.23 LINER TYPE 5
6.09.24 LINER TYPE 6
6.09.25 LINER TYPE 7
6.09.26 LINER TYPE 8
6.09.27 LINER TYPE 12
6.09.28 LINER TYPE 13
6.09.29 LINER TYPE 14
6.09.30 LINER TYPE 15
6.09.31 LINER TYPE 16
6.09.32 LINER TYPE 17
6.09.33 LINER TYPE 18
6.09.34 LINER TYPE 19
6.09.35 LINER TYPE 20
6.09.36 LINER TYPE 21
6.09.37 LINER TYPE 22
6.09.38 LINER TYPE 23
6.09.39 LINER TYPE 24
6.09.40 LINER TYPE 25
6.09.41 LINER TYPE 26
6.09.42 LINER TYPE 27
6.09.43 LINER TYPE 28
6.09.44 LINER TYPE 29
6.09.45 LINER TYPE 30
6.09.46 LINER TYPE 31
6.10 ASH SLURRY TROUGH LINERS
6.10.01 LINER TYPE A5
6.10.02 LINER TYPE A9
3,000
3,700
1,650,000
Quantification of Lot will be submitted later
7,000,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
8,500,000 on after approval & finalisation of detailed
engineering.
Quantification of pipes will be submitted
40,700,000 later on after approval & finalisation of
detailed engineering.
16
NOS.
100,000
1,600,000
2
6
3
3
NOS.
NOS.
NOS.
NOS.
250,000
850,000
650,000
300,000
‐
500,000
5,100,000
1,950,000
900,000
3
NOS.
150,000
450,000
3
NOS.
200,000
600,000
1
2
1
476
90
6
34
56
56
4
42
20
4
22
14
26
6
20
2
2
2
2
2
2
2
2
2
2
2
2
4
4
6
18
4
4
14
2
2
8
2
2
8
4
2
8
8
4
4
1
46
46
LOT
NOS.
LOT
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
LOT
NOS.
NOS.
1,050,000
225,000
2,500,000
1,050,000
450,000
2,500,000
700,000
700,000
Page 3 of 6
REMARK
BBU NO.
DESCRIPTION
BBU VALUE
UNIT RATE
TOTAL
(IN INR)
(IN INR)
QTY.
UNIT
6.10.03 LINER TYPE A29
6.10.04 LINER TYPE A30
6.10.05 LINER TYPE SL5
6.10.06 LINER TYPE L2
6.10.07 LINER TYPE L4
6.10.08 LINER TYPE L9
6.10.09 LINER TYPE 16
6.10.10 LINER TYPE 30
6.10.11 LINER TYPE 32
46
4
6
42
14
8
4
2
2
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
6.11
1
LOT
4,000,000
510
Nos.
9,400
CAST BASALT FITTINGS
6.12 PIPE COUPLINGS/ SLEEVE COUPLINGS
7.00 MS PIPES FOR COMBINED ASH SLURRY DISPOSAL SYSTEM
7.01 MS PIPE [450NB X 9.5 THK.]
8.00 SILO UNLOADING SYSTEM
8.01 TARGET BOX ABOVE SILO
8.02 VENT FAN WITH DRIVE MOTOR
8.03 VENT FILTER
8.04 FILTER BAGS FOR VENT FILTER (ONE SET CONSISTS OF 324 BAGS)
8.05
25500 MTRS.
CAGE WITH VENTURY/ DIFFUSER(ONE SET CONSISTS OF 324 CAGES)
8.07
8.08
8.09
8.10
8.11
8.12
8.13
8.14
8.15
8.16
8.17
9.00
9.01
9.02
9.03
9.04
9.05
9.06
9.07
9.08
9.09
PULSE LET TYPE SOLENOID VALVES FOR VENT FILTER(ONE SET CONSISTS OF
24 NOS)
VENT FAN FOR TELESCOPIC SPOUT
SILO INLET VALVES
CHAIN WHEEL OPERATED ISOLATION VALVE AT SILO OUTLET
PNEUMATIC OPERATED KNIFE GATE VALVES BELOW SILO
PRESSURE / VACUUM RELIEF VALVES
ROTARY FEEDER WITH DRIVE UNIT
DUST CONDITIONER WITH DRIVE UNIT
UNLOADING SPOUT
DRAIN SUMP PUMPS [SILO AREA]
FLUIDIZING PADS FOR SILO [1 SET CONSISTS OF 36 NOS.]
INSTRUMENT AIR RECEIVER AT SILO AREA
WATER DISTRIBUTION SYSTEM
BAHP ASH WATER PUMP
BALP ASH WATER PUMP
BA AREA SEAL WATER PUMP
FLUSHING WATER PUMP
FLY ASH WATER PUMPS
HP SEAL WATER PUMP
FLY ASH CONDITIONER PUMP
WASH WATER PUMPS FOR SILO AREA
ECO WATER PUMP
9.10
8.06
4,300
Quantification of Lot will be submitted later
4,000,000 on after approval & finalisation of detailed
engineering.
4,794,000
‐
109,650,000
‐
800,000
1,400,000
2,800,000
600,000
4
4
4
4
NOS.
NOS.
NOS.
SETS
200,000
350,000
700,000
150,000
4
SETS
450,000
1,800,000
4
SETS
100,000
400,000
4
32
16
8
4
8
4
4
2
4
1
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
SETS
NO.
100,000
150,000
15,000
25,000
65,000
650,000
1,000,000
450,000
200,000
250,000
500,000
2
3
2
1
3
2
3
2
2
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
1,200,000
700,000
400,000
1,500,000
400,000
600,000
300,000
150,000
200,000
400,000
4,800,000
240,000
200,000
260,000
5,200,000
4,000,000
1,800,000
400,000
1,000,000
500,000
‐
2,400,000
2,100,000
800,000
1,500,000
1,200,000
1,200,000
900,000
300,000
400,000
MS PIPES FOR AIR, WATER AND SLURRY LINE
1
LOT
9,000,000
9.11
GATE, GLOBE, CHECK, BUTTERFLY & MISC. TYPES OF VALVES FOR SLURRY,
AIR, WATER APPLICATION.
1
LOT
7,500,000
10.00
10.01
10.02
10.03
11.00
11.01
11.02
INSTRUMENT AIR SYSTEM
INSTRUMENT AIR COMPRESSORS
AIR RECEIVER FOR IAC
AIR DRYING PLANT FOR IAC
FLUIDIZING AIR SYSTEM FOR FA SILO
FLUIDIZING BLOWER FOR FA SILO
HEATERS FOR FLUIDIZING BLOWERS FOR FA SILO
4
4
4
NOS.
NOS.
NOS.
2,500,000
500,000
1,200,000
5
5
NOS.
NOS.
250,000
100,000
11.03
INSULATION
1
LOT
350,000
12.00
12.01
12.02
12.03
12.04
12.05
HCSD SILO SYSTEM
TARGET BOX ABOVE SILO
VENT FAN WITH DRIVE MOTOR
VENT FILTER
FILTER BAGS FOR VENT FILTER(1 SET CONSISTS OF 324 BAGS)
CAGE WITH VENTURY/ DIFFUSER(ONE SET CONSISTS OF 324 CAGES)
PULSE LET TYPE SOLENOID VALVES FOR VENT FILTER(ONE SET CONSISTS OF
24 NOS)
VENT FILTER FOR TELESCOPIC SPOUTS
SILO INLET VALVES
CHAIN WHEEL OPERATED ISOLATION VALVE AT SILO OUTLET
PNEUMATIC OPERATED KNIFE GATE VALVES BELOW SILO
3
3
3
3
3
NOS.
NOS.
NOS.
SETS
SETS
100,000
250,000
700,000
150,000
450,000
3
SETS
100,000
300,000
3
24
12
9
NO.
NOS.
NOS.
NOS.
150,000
150,000
15,000
30,000
450,000
3,600,000
180,000
270,000
12.06
12.07
12.08
12.09
12.10
Page 4 of 6
REMARK
Quantification of Lot will be submitted later
9,000,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
7,500,000 on after approval & finalisation of detailed
engineering.
‐
10,000,000
2,000,000
4,800,000
‐
1,250,000
500,000
Quantification of Lot will be submitted later
350,000 on after approval & finalisation of detailed
engineering.
‐
300,000
750,000
2,100,000
450,000
1,350,000
BBU NO.
DESCRIPTION
QTY.
UNIT
12.11
12.12
12.13
12.14
12.15
PRESSURE / VACUUM RELIEF VALVES
ROTARY FEEDER WITH DRIVE UNIT
PADDLE FEEDER TYPE DUST CONDITIONER WITH DRIVE UNIT
UNLOADING SPOUT
DRAIN SUMP PUMPS [HCSD SILO AREA]
3
9
6
3
2
NOS.
NOS.
NOS.
NOS.
NOS.
12.16
FLUIDIZING PADS FOR SILO( ONE SET CONSISTS OF 24 NOS OF PADS)
3
SETS
12.17
12.18
12.18A
12.19
INSTRUMENT AIR RECEIVER AT HCSD SILO AREA
MIXING TANK
AGITATOR FOR MIXING TANK
Schedule 80 7 5/8" HCSD pipe
12.20
VALVES FOR HCSD SYSTEM
1
NO.
6
NOS.
6
NOS.
33000 MTRS.
1
LOT
BBU VALUE
UNIT RATE
TOTAL
(IN INR)
(IN INR)
65,000
195,000
650,000
5,850,000
1,500,000
9,000,000
450,000
1,350,000
200,000
400,000
150,000
450,000
300,000
2,000,000
1,500,000
3,950
300,000
12,000,000
9,000,000
130,350,000
2,000,000
Quantification of Lot will be submitted later
2,000,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
on after approval & finalisation of detailed
13,000,000
engineering. Also all the HCSD equipment
will be wetted by the HCSD design agency.
12.21
EQUIPMENTS / INSTRUMENTS FOR HCSD SYSTEM
1
LOT
13,000,000
13.00
13.01
13.02
FLUIDIZING AIR SYSTEM FOR HCSD SILO
FLUIDIZING BLOWER FOR HCSD SILO
HEATERS FOR FLUIDIZING BLOWERS FOR HCSD SILO
3
3
NOS.
NOS.
250,000
90,000
13.03
INSULATION
1
LOT
350,000
14.00
14.01
14.02
14.03
14.04
14.05
CRANES, HOISTS & CHAIN PULLEY BLOCKS
CRANE FOR ASH SLURRY PUMP HOUSE
CRANE FOR AIR COMPRESSOR HOUSE
CRANE FOR ASH WATER PUMP HOUSE
CRANE FOR SILO UTILITY ROOM
CRANE FOR HCSD PUMP HOUSE
1
1
1
1
1
NO.
NO.
NO.
NO.
NO.
1,000,000
1,850,000
600,000
325,000
2,200,000
14.06
MONORAIL / ELECTRICAL OPERATED HOIST
1
LOT
1,000,000
15.00
C&I
15.01
C&I Instruments
1
LOT
15.02
FRP Junction Box
1
LOT
15.03
Process connection and piping for complete set of instruments
1
LOT
15.04
INSTRUMENTATION CABLE
1
16.00
AIR CONDITIONING & MECHANICAL VENTILATION SYSTEM
17.00
‐
750,000
270,000
Quantification of Lot will be submitted later
350,000 on after approval & finalisation of detailed
engineering.
‐
1,000,000
1,850,000
600,000
325,000
2,200,000
Quantification of Lot will be submitted later
1,000,000 on after approval & finalisation of detailed
engineering.
‐
11,550,000
11,550,000
LOT
20,000,000
20,000,000
1
LOT
5,000,000
GRATINGS
1
LOT
10,000,000
18.00
STRUCTURAL STEEL WORKS
1
LOT
44,589,000
19.00
FOUNDATION BOLTS FOR VARIOUS AREA
1
LOT
10,000,000
20.00
20.01
20.02
20.03
20.04
20.05
20.06
20.07
20.08
20.09
20.10
20.11
20.12
20.13
20.14
20.15
20.16
ELECTRICAL
MOTORS
DRIVE MOTOR FOR ASH SLURRY DISPOSAL PUMPS
DRIVE MOTOR FOR BAHP ASH WATER PUMP
DRIVE MOTOR FOR BALP ASH WATER PUMP
DRIVE MOTOR FOR BA AREA SEAL WATER PUMP
DRIVE MOTOR FOR FLUSHING WATER PUMP
DRIVE MOTOR FOR FLY ASH WATER PUMPS
DRIVE MOTOR FOR HP SEAL WATER PUMP
DRIVE MOTOR FOR FLY ASH CONDITIONER PUMP
DRIVE MOTOR FOR WASH WATER PUMPS FOR SILO AREA
DRIVE MOTOR OF FLUIDIZING BLOWER FOR BUFFER HOPPER
DRIVE MOTOR OF FLUIDIZING BLOWER FOR SILO
DRIVE MOTOR OF FLUIDIZING BLOWER FOR HCSD SILO
DRIVE MOTOR FOR BAOF PUMP
DRIVE MOTOR FOR SLUDGE PUMP
DRIVE MOTOR FOR VACUUM PUMP
DRIVE MOTOR FOR INSTRUMENT AIR COMPRESSOR
6
2
3
2
1
3
2
3
2
4
5
3
4
2
24
4
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
1,000,000
800,000
150,000
30,000
150,000
150,000
75,000
45,000
35,000
30,000
40,000
55,000
250,000
30,000
300,000
350,000
Page 5 of 6
REMARK
Type of instruments cannot be verified at
this stage. Quantification of Lots will be
submitted later on after approval &
finalisation of detailed engineering.
Quantification of Lot will be submitted later
5,000,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
10,000,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
44,589,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
10,000,000 on after approval & finalisation of detailed
engineering.
‐
‐
6,000,000
1,600,000
450,000
60,000
150,000
450,000
150,000
135,000
70,000
120,000
200,000
165,000
1,000,000
60,000
7,200,000
1,400,000
BBU NO.
DESCRIPTION
QTY.
UNIT
BBU VALUE
UNIT RATE
TOTAL
(IN INR)
(IN INR)
1,000,000
10,000,000
25,000
50,000
50,000
100,000
35,000
70,000
850,000
5,100,000
50,000
100,000
20.17
20.18
20.19
20.20
20.21
20.22
DRIVE MOTOR FOR TRANSPORT AIR COMPRESSOR
DRIVE MOTOR FOR DRAIN SUMP PUMP [SLURRY PUMP HOUSE]
DRIVE MOTOR FOR DRAIN SUMP PUMP [AT SILO AREA]
DRIVE MOTOR FOR DRAIN SUMP PUMP [AT HCSD SILO AREA]
DRIVE MOTOR FOR HCSD PUMP
DRIVE MOTOR FOR ECO WATER PUMP
10
2
2
2
6
2
NOS.
NOS.
NOS.
NOS.
NOS.
NOS.
21.00
MCC/ DCDB/ACDB/MLDB/LDB/DCFB
1
LOT
26,500,000
22.00
LT POWER CABLES
1
LOT
30,000,000
23.00
CONTROL CABLES
1
LOT
20,000,000
24.00
ILLUMINATION INCLUDING LIGHTING PANELS
1
LOT
4,500,000
25.00
CONTROL PANELS / STATIONS & PLC PACKAGE INCLUDING UPS &PDB OF
HCSD PLC.
1
LOT
1,000,000
26.00
27.00
28.00
29.00
30.00
VFD DRIVE FOR TAC MOTORS
TRANSFORMER FOR VFD DRIVE FOR TAC MOTORS
VFD DRIVE FOR HCSD PUMP MOTOR
TRANSFORMER FOR VFD DRIVE FOR HCSD PUMP MOTOR
VFD FOR ROTARY FEEDER FOR HCSD SILO
10
10
6
6
15
NOS.
NOS.
NOS.
NOS.
NOS.
1,000,000
1,000,000
2,750,000
1,500,000
150,000
31.00
EARTHING & LIGHTNING
1
LOT
300,000
32.00
CABLE TRAYS AND ACCESSORIES
1
LOT
7,500,000
33.00
MISC. ELECTRICAL EQUIPMENTS INCLUDING RECEPTACLES
1
LOT
1,000,000
34.00
ANY OTHER ITEM REQUIRED FOR SYSTEM COMPLETION INCLUDING SMI,
MECHANICAL, STRUCTURAL, ELECTRICAL, C&I OR ANY MISC. ITEM
1
LOT
90,200,000
TOTAL
REMARK
Quantification of Lot will be submitted later
26,500,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
30,000,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
20,000,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
4,500,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
1,000,000 on after approval & finalisation of detailed
engineering.
10,000,000
10,000,000
16,500,000
9,000,000
2,250,000
Quantification of Lot will be submitted later
300,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
7,500,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
1,000,000 on after approval & finalisation of detailed
engineering.
Quantification of Lot will be submitted later
90,200,000 on after approval & finalisation of detailed
engineering.
1,086,650,000
Note for supply:
This billing break-up is for on account payment purpose only and payment shall be made as per the terms and procedures of payment as specified in the
1.0
C
2.0
Any other item/Qty. not specifically indicated in this Billing Break-up but required to complete the system as per the technical specifications & system
requirement shall be supplied by the contractor without any additional financial implication to MUNPL.
Quantification/sub-billing schedule of items identified as Lots will be submitted later after approval & finalisation of detailed engineering. The same shall be
3.0
dispatched and billing will be done after approval of such sub-billing schedule for these Lot items.
The description, technical particulars and quantities of various items indicated above are only indicative and subject to change during detail engg. Any
4.0
equipment / items shall be supplied according to approved drawings / datasheets.
Tecpro Systems Limited to ensure that all types of cables, instruments , sensors for C & I system shall be covered.
5.0
6.0
The billing schedule of items given above deemed to include all such items which although not specifically mentioned in the contract and / or billing schedule but
are required to complete the system as per specification.
Page 6 of 6