14407_APG_CVR
7/12/04
12:33 PM
Page 1
O-Ring Handbook
“America’s Most Responsive Warehouse”
(713) 675-5271
1-800-888-5223
FAX: (713) 675-2730
FAX: 1-800-444-3252
P.O. Box 213 (77001)
6039 Armour Dr. (77020)
Houston, Texas
www.callapg.com
14407_APG_CVR
7/12/04
12:33 PM
www.callapg.com
Page 3
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Our Policy
Prices
Prices quoted are for acceptance within thirty days from date quoted. Unless specified, prices are based on our
receiving order for quantities quoted.
Terms
Our terms of payment are 1% 10, net 30 days, unless other arrangements are made through our credit department.
Minimum Invoice
Orders consisting of O-Rings Only - $5.00.
Orders consisting of O-Rings and/or All Other Products (Excluding Plastic Products) - $15.00
City Sales Counter - $35.00
Plastic Products - $50.00
Warranty
Products are warranted against defects in workmanship and defects in material. Products having such defects will
be replaced or credited as APG elects. Liability is limited to the invoice value of the defective item. Our
responsibility shall not exceed the original purchase price of the defective product. In any event, APG shall not be
held responsible for any special or consequential damages. In all cases, please contact us for approval and routing
of return items. All claims of shortage or damage must be made within 30 days after receipt of shipment.
Freight
All orders totalling less than $750 at NET prices are F.O.B. our warehouse with no freight allowance. Orders
totalling $750 or more at NET prices, any product mix, receive full freight prepaid and allowed, provided such orders
are for one shipment within the lower 48 continental United States and provided our normal freight modes are used.
Special delivery charges incurred at the customer’s request are for the customer’s account. Exceptions to this
freight prepaid and allowed policy: all glass products. These products are F.O.B. our warehouse with no freight
allowance unless other items on the order total $750 or more at NET prices.
Catalog Information
“America’s Most Responsive Warehouse”
(713) 675-5271
1-800-888-5223
FAX: (713) 675-2730
FAX: 1-800-444-3252
P.O. Box 213 (77001)
6039 Armour Dr. (77020)
Houston, Texas
www.callapg.com
Various information sources were used to compile this catalog. We offer this information only as a guide and cannot
assume responsibility for accuracy of the data herein. Prices listed are current, subject to change.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Table of Contents
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
APG O-Ring Compounds and Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Elastomer Description and Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
O-Ring Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Standard O-Ring Sizes and Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Standard O-Ring Sizes and Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
O-Ring Boss Gaskets for Straight Thread Tube Fittings . . . . . . . . . . . . . . . 17
Metric O-Ring Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Japanese Industrial Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Q-Ring Sizes and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Contoured Back-Up Rings-Series 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
PTFE Spiral Back-Up Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PTFE Back-Up Rings (Solid and Split) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
PTFE Back-Up Rings (Extended Sizes). . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Leather Back-Up Rings-Series 6244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Leather Back-Up Rings-Series 6246 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Square Cut Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
O-Ring Groove Design Criteria and Installation Data . . . . . . . . . . . . . . . . . 61
Gland Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Installation Data (inches) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Installation Data (millimeters) . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Vulcanizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Standards for Spliced Extrusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
O-Ring Cord Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Extrusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Related O-Ring Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Compound Selection for Fluids and Chemicals . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Age Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Fastener Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Thread Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
The Complete APG Product Line is listed on pages 103 and 104.
June 2004
i
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Product Index
Aflas® . . . . . . . . . . . . . . . . . . . . . . . 1, 3
Age Controls . . . . . . . . . . . . . . . . . . . 95
Back-Up Rings (Contoured Back-UpSeries 8) . . . . . . . . . . . . . . . . . . . . 44
Back-Up Rings (Leather) . . . . . . . 55, 56
Back-Up Rings (PTFE -Extended
Sizes) . . . . . . . . . . . . . . . . . . . . . . 53
Back-Up Rings (PTFE Solid & Split) . 51
Back-Up Rings (PTFE Spiral) . . . . . . 47
Bags (Re-closable Plastic) . . . . . . . . 83
Boss Gaskets (O-Ring) . . . . . . . . . . . 17
Chart (O-Ring Sizing) . . . . . . . . . . . . 83
Chemicals and Fluids (Compound
Selection for). . . . . . . . . . . . . . . . . 85
Chloroprene . . . . . . . . . . . . . . . . . . 1, 2
Compound Selection for Fluids and
Chemicals. . . . . . . . . . . . . . . . . . . 85
Cone (O-Ring Measuring) . . . . . . . . . 83
Contoured Back-Up Rings (Series 8) 44
Cord Stock (O-Ring) . . . . . . . . . . . . . 79
Dynamic Sealing . . . . . . . . . . . . . . . . 61
Elastomer Descriptions . . . . . . . . . . . . 2
EPDM . . . . . . . . . . . . . . . . . . . . . . . 1, 3
EPM . . . . . . . . . . . . . . . . . . . . . . . . 1, 3
EPR. . . . . . . . . . . . . . . . . . . . . . . . . 1, 3
Ethylene Propylene . . . . . . . . . . . . . 1, 3
Extrusions . . . . . . . . . . . . . . . . . . . . . 82
Fastener Seals . . . . . . . . . . . . . . . . . 96
Fluoroelastomer . . . . . . . . . . . . . . . 1, 2
Fluorosilicone . . . . . . . . . . . . . . . . . 1, 3
Fluids and Chemicals (Compound
Selection for). . . . . . . . . . . . . . . . . 82
Gland Dimensional Data . . . . . . . . . . 64
Gland Shape . . . . . . . . . . . . . . . . . . . 61
Groove Design . . . . . . . . . . . . . . . . . 61
Highly Saturated Nitrile . . . . . . . . . . 1, 2
HNBR . . . . . . . . . . . . . . . . . . . . . . . 1, 2
HSN . . . . . . . . . . . . . . . . . . . . . . . . 1, 2
Installation Data . . . . . . . . . . . . . . 65,72
Japanese Industrial Standards . . . . . 38
Kit (O-Ring Splicing) . . . . . . . . . . . . . 76
Kits (O-Ring) . . . . . . . . . . . . . . . . . . . 73
Leather Back-Up Rings . . . . . . . . 55, 56
Lubricants (O-Ring). . . . . . . . . . . . . . 84
ii
Measuring Cone (O-Ring) . . . . . . . . . 83
Measuring Tape. . . . . . . . . . . . . . . . . 83
Metric O-Rings . . . . . . . . . . . . . . . . . 18
Neoprene . . . . . . . . . . . . . . . . . . . . 1, 2
Nitrile. . . . . . . . . . . . . . . . . . . . . . . . 1, 2
O-Ring Cord Stock . . . . . . . . . . . . . . 79
O-Ring Identifier . . . . . . . . . . . . . . . . 83
O-Ring Kits . . . . . . . . . . . . . . . . . . . . 73
O-Ring Lubricants . . . . . . . . . . . . . . . 84
O-Ring Measuring Cones . . . . . . . . . 83
O-Ring Picks . . . . . . . . . . . . . . . . . . . 84
O-Ring Sizing Chart . . . . . . . . . . . . . 83
O-Ring Slide Gauge . . . . . . . . . . . . . 83
O-Ring Splicing Kits . . . . . . . . . . . . . 76
Picks (O-Ring). . . . . . . . . . . . . . . . . . 84
Plastic Bags (Re-closeable) . . . . . . . 83
Polyurethane . . . . . . . . . . . . . . . . . . 1, 3
Pressure . . . . . . . . . . . . . . . . . . . . . . 62
PTFE. . . . . . . . . . . . . . . . . . . . . . . . 1, 3
PTFE Back-Up Rings (Extended
Sizes) . . . . . . . . . . . . . . . . . . . . . . 53
PTFE Back-Up Rings (Solid & Split) . . 51
PTFE Spiral Back-Up Rings . . . . . . . 47
Q-Rings. . . . . . . . . . . . . . . . . . . . . . . 40
Re-closeable Plastic Bags. . . . . . . . . 83
Selection (Compound, for Fluids and
Chemicals) . . . . . . . . . . . . . . . . . . 85
Silicone . . . . . . . . . . . . . . . . . . . . . . 1, 2
Sizing Chart (O-Ring) . . . . . . . . . . . . 83
Solid Back-Up Rings (PTFE) . . . . 51, 53
Spiral Back-Up Rings (PTFE) . . . . . . 47
Spliced Extrusion Standards . . . . . . . 78
Splicing Kits . . . . . . . . . . . . . . . . . . . 76
Split Back-Up Rings (PTFE) . . . . . . . 51
Square Cut Rings . . . . . . . . . . . . . . . 57
Squeeze . . . . . . . . . . . . . . . . . . . . . . 62
Standard O-Rings . . . . . . . . . . . . . . 6, 7
Standards for Spliced Extrusions . . . 78
Static Sealing . . . . . . . . . . . . . . . . . . 61
Surface Finish . . . . . . . . . . . . . . . . . . 63
Teflon® Encapsulated. . . . . . . . . . . 1, 3, 4
Thread Seals. . . . . . . . . . . . . . . . . . . 97
Urethane . . . . . . . . . . . . . . . . . . . . . 1, 3
Vulcanizing . . . . . . . . . . . . . . . . . . . . 77
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
APG O-Ring Compounds and Styles
At press time for the printing of the catalog, the following represented a complete listing of O-Ring compounds and
styles inventoried by APG as standard stock items. (APG Style Numbers are listed in parenthesis). Other options may
now be available as standard items or by special order. Please inquire.
O-Rings
Aflas® 80 Durometer
Chloroprene 70 Durometer
E.P.R. 70 Durometer
Standard
Metric
Fluoroelastomer – Black
Standard
75 Durometer
90 Durometer
Metric
75 Durometer
90 Durometer
Fluoroelastomer – Brown
75 Durometer
90 Durometer
Fluorosilicone 70 Durometer
Highly Saturated Nitrile
Green 70 Durometer
Standard
Metric
Black 90 Durometer
Blue TFE Coated 70 Durometer
Nitrile - Black
Standard
50 Durometer
70 Durometer
90 Durometer
Metric
70 Durometer
90 Durometer
Nitrile - Black - Peroxide Cured
90 Durometer
Nitrile - White 70 Durometer
PTFE
Silicone 70 Durometer
Standard
Metric
Square Cut Rings
Nitrile 70 Durometer
Teflon® Encapsulated
Viton® Core
Silicone Core
Urethane
70 Durometer
90 Durometer
4 Lobe Q-Rings
Nitrile 70 Durometer
Fluoroelastomer 75 Durometer
Minnesota Quad-Rings®
Available at ENA (an APG subsidiary)
Nitrile 70 Durometer
Viton® 70 Durometer
Back-Up Rings
(A80)
(N70)
(E70)
(E)
(V70)
(V90)
PTFE
Solid
Split
Spiral
Contoured Back-Up Rings
Nitrile 90 Durometer
Fluoroelastomer 90 Durometer
Leather
(TST)
(TST)
(TSP)
(HB90)
(VBU90)
(Cut for Series
6244 &
Series 6246)
(V)
(V90M)
(VB75)
(VB90)
(FS70)
(HS70)
(HS)
(HSN90)
(HST70)
(H50)
(H70)
(H90)
(H)
(H90M)
(H90PC)
(H70FDA)
(TFE)
(S70)
(S)
(SH70)
(TEV80)
(TES70)
(U70)
(U90)
(QH70)
(QV70)
(HQ4)
(VQ4)
1
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Elastomer Descriptions and Properties
Nitrile
(Buna-N)
Trade Names:
Chemigum (Goodyear)
Ny Syn (Copolymer)
Krynac (Polysar)
Hycar (Zeon Chemical)
Paracril (Uniroyal)
Perbunan (Mobay)
The most widely used O-Ring elastomer. Excellent resistance to petroleum products. Excellent compression set, tear
and abrasion resistance. Does not have good resistance to ozone, sunlight, or weather, unless specifically
compounded. Should not be stored in direct sunlight or near motors or other electrical equipment which may generate
ozone. Temperature range: -40° to +250°F.
Fluoroelastomer
Trade Names:
Viton (E.I. duPont)
Fluorel (3M)
Excellent mechanical and physical properties. Good resistance to petroleum products, low compression set, and high
temperature resistance. Wide spectrum of chemical compatibility. Good for vacuum service and low gas permeability.
Temperature range: -15° to +400°F (limited exposures to higher temperatures).
Chloroprene
(Neoprene)
Trade Names:
Neoprene (E.I. duPont)
Butachlor (Ditsugil)
Bayprene (Mobay)
Moderately resistant to petroleum products. Good ozone and weather resistance. Good compression set. Excellent for
sealing refrigeration fluids such as Freon®. Temperature range: -65° to +250°F.
Silicone
Trade Names:
Silastic (Dow)
Recommended for applications requiring a wide temperature range and good dry heat resistance. Good weather and
ozone resistance. Limited oil resistance. Not normally recommended for dynamic sealing applications due to relatively
poor tensile and tear strength and relatively low abrasion resistance. Temperature range: -80° to + 450°F.
Highly Saturated Nitrile
(HSN, HNBR)
Better resistance to high temperatures, superior physical properties, and improved chemical resistance over traditional
nitrile compounds. It also has better resistance to ozone, sunlight, and other atmospheric conditions. Excellent
resistance to compression set. Green HSN is used in refrigerant R134a applications. Temperature range: - 40°F to
+325°F.
2
www.callapg.com
713-675-5271
1-800-888-5223
Ethylene Propylene
FAX 713-675-2730
FAX 1-800-444-3252
(EPM, EPDM) (EPR)
Trade Names:
Nordel (E.I. DuPont)
Royalene (Uniroyal)
Epsyn (Copolymer Rubber)
Vistalon (Exxon Chemical)
Epcar (B. F. Goodrich)
Excellent resistance to Skydrol® fluids used in commercial aircraft hydraulic systems. Also, recommended for hot
water, steam, and phosphate ester type hydraulic fluids. Also resistant to some acids, alkalies, and ozone. Not
recommended for petroleum fluids or diester lubricants. Temperature range: -65° to +300°F.
PTFE
Trade Name:
Teflon® (E.I. duPont)
White thermoplastic fluoroethylene resin offers a combination of qualities not found in any other material-chemical
inertness, heat resistance, low friction, dialectric strength, weatherability, zero water absorption, toughness, and
flexibility. Temperature range: -65° to +500°F.
Aflas®
Trade Name:
Aflas® (Asahi Glass Co., Ltd.)
Advantageous combination of high temperature, chemical and electrical resistance properties. Recommended for oils
and lubricants, hydraulic and brake fluids, transmission and power steering fluids, sour oil and gas (H2S), amine
corrosion inhibitors, ozone, steam, acids, bases, alcohols, and a variety of other chemicals. Temperature range: -20° to
+400°F. (+600°F short term).
Urethane
Trade Names:
(Polyurethane)
Texin (Miles Chemical)
Adiprene (Uniroyal)
Cyanaprene (American Cyanamid)
Pellethane (Dow Chemical)
Resistant to petroleum oils, hydrocarbon fuels, oxygen, ozone, and weathering. Particularly recommended for hydraulic
systems where high pressures, shock loads, wide metal tolerances, or abrasive contamination is anticipated. Not
recommended for acids, ketones, and chlorinated hydrocarbons. Some urethanes are also sensitive to water and
humidity. Temperature range: -65° to +200°F.
Teflon® Encapsulated
Seamless and uniform Teflon® FEP encapsulation which completely encloses a core material of either silicone or
Viton® elastomer. Matches the chemical and temperature resistance of solid PTFE O-Rings and possesses the
elasticity and recovery properties which are crucial in many sealing applications. Complete technical information on
Teflon® Encapsulated O-Rings is provided on pages 4 and 5.
Fluorosilicone
Trade Names:
LS (Dow)
(FVMQ)
FSE (GE)
Good low/high temperature resistance. Excellent resistance to petroleum oils and fuels. Used in aerospace applications for
fuel systems and systems requiring resistance to diester base lubricants to 350˚F. Due to limited strength and abrasion
resistance, this material is generally recommended for static applications only. Temperature range: -80˚ to +350/400˚F.
3
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Teflon™ Encapsulated O-Ring
Technical Information
Composition and Structure
Properties/Specifications
Teflon™ FEP Encapsulated o-rings consist of a seamless
and uniform Teflon™ FEP encapsulation which completely
encloses a core material of either silicone or Viton™
elastomer.
(1) Encapsulation material: Teflon™ FEP resin
(yielding high chemical resistance).
(2) Core material: Silicone or Viton™ elastomers.
(3) Operational temperature range:
-60°C/-75°F to +205°C/400°F.
(4) Coefficient of friction: .1 to .2
(5) Elongation at break: 100%-156%
(6) Water absorption:<0.01
(7) Average total shore A hardness:
85-90 shore A-silicone core
90-95 shore A-Viton™core
(8) FDA Compliance: The clear Teflon™ FEP
encapsulation complies with part 177 of Title 21
of the Food and Drug Administration’s
regulations for safe use as articles or
components of articles for producing,
manufacturing, processing, preparing, treating,
packaging, transporting, or holding food in
accordance with regulation 177.1550.
Teflon™ FEP Encapsulation
between 0.010” to 0.045”
depending on o-ring cross
section (not a coating)
Silicone or Viton™
Core Material
Function and Performance
Industrial Applications
The seamless, uniform, and integral Teflon™ FEP
encapsulation is responsible for the sealing effect, and the
elastomer core provides continuous reset and constant
pressure of the encapsulation onto the sealing point. The
result is an overall compression, increasing with medium
pressure.
•
•
•
•
•
•
•
•
•
•
•
As a result, the Teflon™ FEP Encapsulated O-Rings can
outperform solid PTFE O-Rings. The encapsulated o-rings
match the chemical and temperature resistance of solid
PTFE O-Rings and possess the elasticity and recovery
properties which are crucial in many sealing applications.
Chemical attack and swelling are the primary causes of
failure in o-rings. The Teflon™ FEP encapsulation is virtually
chemically inert and not subject to most chemical attack.
Temperature operating range-60°C/-75°F to +205°C/400°F.
4
Aircraft and Aerospace
Chemical Processing Industries
Pharmaceutical Production
Polymer Production
Paint and Coating Operations
Food Industries
Petrochemical Industries
Chemical Transport
Semi-Conductor Manufacturing
Pulp and Paper Industries
Photochemical Industries
Specific Applications
•
•
•
•
•
•
•
•
•
Air Operated Pumps
Mechanical Pumps
Autoclaves
Heat Exchangers
Pipelines
Pressure Vessels
Valves
Filtration Systems
Gas Compressors
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Gas Permeability
All plastics have some permeability to gases. In the case
of Teflon™ FEP Encapsulated O-Rings, however, gases
and vapors will permeate at a considerably lower rate than
for most other plastics.
The primary permeation
mechanism is intermolecular migration. This migration
rate depends on the type of gas, pressure, temperature,
size of contact areas, and thickness of encapsulation.
While highly corrosive gases do not attack the
Teflon™FEP Encapsulation of the o-ring, they may
eventually permeate through and damage the elastomer
core and hence affect the mechanical properties. Thus, in
addition to chemical resistance, these permeability effects
must be considered in gas sealing systems.
Water Vapor Transmission Rate of
Teflon™FEP Resins @ 40°C/104°F
Transmission Rate = gm/100in2/24hrs
0.40
0.35
0.30
0.25
0.20
Permeability of Teflon™ FEP Resins
2
1
0.15
(gm/100in /24 hrs-1mil) TABLE 1
GASES2
Carbon Dioxide
Helium
Hydrogen Chloride
Nitrogen
Oxygen
23°C/73°F
35°C/95°F 50°C/122°F
<.05
0.18
0.39
3
VAPORS3
Acetic Acid
Acetone
Acetophenone
Benzene
N-Butyl Ether
Carbon Tetrachloride
Decane
Dipentene
Ethyl Acetate
Ethyl Alcohol
Hexane
Hydrochloric Acid (20%)
Methanol
Piperdine
Skydrol Hydraulic Fluid
Sodium Hydroxide (50%)
Sulfuric Acid (98%)
Toluene
Water
1.
2.
3.
0.10
0.13
0.47
0.15
0.08
0.11
0.72
0.17
0.06
0.11
0.42
0.95
3.29
9
10
12
Thickness/mils
Please note that the vapor transmission rate significantly decreases when
the thickness of encapsulation is increased
0.64
0.65
Thickness of Encapsulation
1.03
0.35
2.90
As discussed earlier, the thickness of encapsulation must
be considered in determining migration rates. The
thickness of the encapsulation varies with the cross
section of the o-ring.
0.31
0.77
0.69
0.57
<0.01
5.61
0.04
0.05
-5
4x10
8x10-6
0.37
0.09
6
0.45
2.93
0.89
Note that the permeation data listed in Table 1 is based on
0.001” thickness of Teflon™ FEP encapsulation. The
transmission rate significantly decreases when the
thickness of encapsulation is increased. See water vapor
transmission rate chart.
Test method: ASTM D-790-59 (at 1atm).
Test method: ASTM E-96-53T (vapor Pressure).
Absorption
Teflon™ FEP Encapsulated O-Rings absorb practically no
common acids or bases at temperatures as high as
200°C/329°F with exposures up to one year. Even the
absorption of solvents is surprisingly small; weight
increases are generally less than 1% at elevated
temperatures and exposure times. Due to the Teflon™
FEP encapsulation, the effects of volume swell (one of the
principal causes of seal failure) can be virtually ignored.
Cross
Wall
Cross
Section
(mm/inches)
Section
(mm/inches)
Section
(mm/inches)
Wall
Section
(mm/inches)
1.50mm/.059
1.60mm/.063
1.78mm/.070
2.00mm/.079
2.40mm/.094
2.62mm/.103
3.00mm/.118
3.53mm/.139
4.00mm/.157
4.50mm/.177
5.00mm/.196
5.33mm/.210
5.70mm/.225
6.00mm/.236
7.00mm/.275
0.203mm/.008
0.203mm/.008
0.254mm/.010
0.254mm/.010
0.254mm/.010
0.279mm/.011
0.279mm/.011
0.305mm/.012
0.305mm/.012
0.381mm/.015
0.381mm/.015
0.381mm/.015
0.381mm/.015
0.381mm/.015
0.508mm/.020
7.50mm/.295
8.00mm/.312
8.40mm/.330
9.00mm/.354
9.50mm/.374
10.00mm/.393
11.00mm/.433
12.00mm/.472
12.70mm/.500
14.00mm/.551
15.00mm/.591
16.00mm/.625
18.00mm/.708
19.00mm/.750
20.00mm/.787
0.508mm/.020
0.508mm/.020
0.508mm/.020
0.508mm/.020
0.508mm/.020
0.508mm/.020
0.762mm/.030
0.762mm/.030
0.762mm/.030
0.762mm/.030
0.762mm/.030
0.762mm/.030
0.762mm/.030
0.762mm/.030
0.762mm/.030
Final selection of applications must be based on functional
evaluations or experience under actual end use
conditions. This has become industry practice dictated by
the many complex aspects of performance in severe
conditions. The end user should thoroughly test any
application, and independently conclude satisfactory
performance of the product for his intended use, and shall
assume all risk and liability whatsoever in connection
therewith.
5
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
O-Ring Dimensional Data
Standard O-Ring Sizes and Tolerances
An O-Ring functions as a seal through the mechanical
deformation of the elastomeric compound by mating
metal surfaces. The resilient rubber conforms to the
shape of the metal sections and blocks the passage of
gases or liquids. If the pressure increases, the O-Ring is
further deformed and provides tighter sealing.
The application of O-Rings is based on a volume
relationship between the O-Ring and the gland.
Experience has shown that O-Ring volume is not
adversely affected by wider dimensional tolerances.
Furthermore, Type II tolerances long in use for the
fluoroelastomers and similar high shrinkage materials
have proven to be as effective as seals molded to tighter
tolerances. This is attributable to constant seal volume.
As a result of this, the latest revision of AS 568, formerly
ARP 568 and now AS 568A, is a combination of Class I
and II tolerances. This change is being incorporated in all
military specifications and drawings as they come up for
revision. Therefore, in the future, most AN, MS and NAS
tolerance standards will conform to AS 568A. It should be
recognized that standards apply both to dimensions, as
shown, to drawing numbers, and to compounds, and that
the military specifications will not be withdrawn, but
updated to conform to a single dimensional specification.
Various company standards probably also will be revised
to meet this standard.
6
Through
O-Ring
industry
sponsored
technical
committees, the United States is currently working with
the International Standards Organization (ISO) to adapt
AS 568A standard sizes to international metric
requirements.
Tentative agreement has been reached on a size standard
incorporating the existing five AS 568A cross sections and
a series of ID dimensions determined by a logarithmic
progression of the numbers. The result has been to
increase the number of small sizes, i.e. to make the steps
between sizes smaller, and to decrease the number of
large sizes by widening the steps between sizes. This
action is consistent with the assembly requirements of an
O-Ring seal, and the elastic properties of O-Ring seal
compounds.
Although some U.S. sizes will be deleted or modified in the
new document, manufacturers will continue to
manufacture existing sizes as long as there is demand.
The new ISO sizes will become available when
approved by member nations. In the meantime, AS
568A contains metric equivalents in International
System (SI) units. Calculation of these metric
equivalents was done in accord with the rules
appearing in SAE J390, Method A, rounding off
tolerances as recommended.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions
AN 6227B
AND
AN 6230B
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
DASH
NUMBERS
AN 1238561
TO
AN 123934
INCH
STANDARD
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
METRIC
STANDARD
(MM)
±
I.D.
±
-004 to -050 Cross Section Diameters = .070 ± .003 inches — 1.78 ± 0.08 millimeters.
★ -001
★ -002
★ -003
-004
-005
-001**
-002**
-003**
-004
-005
1/32
3/64
1/16
5/64
3/32
x 3/32
x 9/64
x 3/16
x 13/64
x 7/32
x1/32
x1/32
x1/16
x1/16
x1/16
.029
.042
.056
.070
.101
.004
.004
.004
.005
.005
0.74
1.07
1.42
1.78
2.57
0.10
0.10
0.10
0.13
0.13
-006
-007
-008
-009
-010
AN 6227B-1
AN 6227B-2
AN 6227B-3
AN 6227B-4
AN 6227B-5
-006
-007
-008
-009
-010
AN 123856
AN 123857
AN 123858
AN 123859
AN 123860
1/8
5/32
3/16
7/32
1/4
x 1/4
x 9/32
x 5/16
x 11/32
x 3/8
x1/16
x1/16
x1/16
x1/16
x1/16
.114
.145
.176
.208
.239
.005
.005
.005
.005
.005
2.90
3.68
4.47
5.28
6.07
0.13
0.13
0.13
0.13
0.13
-011
-012
-013
-014
-015
AN 6227B-6
AN 6227B-7
-011
-012
-013
-014
-015
AN 123861
AN 123862
5/16
3/8
7/16
1/2
9/16
x 7/16
x 1/2
x 9/16
x 5/8
x 11/16
x1/16
x1/16
x1/16
x1/16
x1/16
.301
.364
.426
.489
.551
.005
.005
.005
.005
.007
7.65
9.25
10.82
12.42
14.00
0.13
0.13
0.13
0.13
0.18
-016
-017
-018
-019
-020
-016
-017
-018
-019
-020
5/8
11/16
3/4
13/16
7/8
x 3/4
x 13/16
x 7/8
x 15/16
x1
x1/16
x1/16
x1/16
x1/16
x1/16
.614
.676
.739
.801
.864
.009
.009
.009
.009
.009
15.60
17.17
18.77
20.35
21.95
0.23
0.23
0.23
0.23
0.23
-021
-022
-023
-024
-025
-021
-022
-023
-024
-025
15/16
1
1-1/16
1-1/8
1-3/16
x1-1/16
x1-1/8
x1-3/16
x1-1/4
x1-5/16
x1/16
x1/16
x1/16
x1/16
x1/16
.926
.989
1.051
1.114
1.176
.009
.010
.010
.010
.011
23.52
25.12
26.70
28.30
29.87
0.23
0.25
0.25
0.25
0.28
-026
-027
-028
-029
-030
-026
-027
-028
-029*
-030*
1-1/4
1-5/16
1-3/8
1-1/2
1-5/8
x1-3/8
x1-7/16
x1-1/2
x1-5/8
x1-3/4
x1/16
x1/16
x1/16
x1/16
x1/16
1.239
1.301
1.364
1.489
1.614
.011
.011
.013
.013
.013
31.47
33.05
34.65
37.82
41.00
0.28
0.28
0.33
0.33
0.33
-031
-032
-033
-034
-035
-031*
-032*
-033*
-034*
-035*
1-3/4
1-7/8
2
2-1/8
2-1/4
x1-7/8
x2
x2-1/8
x2-1/4
x2-3/8
x1/16
x1/16
x1/16
x1/16
x1/16
1.739
1.864
1.989
2.114
2.239
.015
.015
.018
.018
.018
44.17
47.35
50.52
53.70
56.87
0.38
0.38
0.46
0.46
0.46
-036
-037
-038
-039
-040
-036*
-037*
-038*
-039*
-040*
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
x2-1/2
x2-5/8
x2-3/4
x2-7/8
x3
x1/16
x1/16
x1/16
x1/16
x1/16
2.364
2.489
2.614
2.739
2.864
.018
.018
.020
.020
.020
60.05
63.22
66.40
69.57
72.75
0.46
0.46
0.51
0.51
0.51
-041
-042
-043
-044
-045
-041*
-042*
-043*
-044*
-045*
3
3-1/4
3-1/2
3-3/4
4
x3-1/8
x3-3/8
x3-5/8
x3-7/8
x4-1/8
x1/16
x1/16
x1/16
x1/16
x1/16
2.989
3.239
3.489
3.739
3.989
.024
.024
.024
.027
.027
75.92
82.27
88.62
94.97
101.32
0.61
0.61
0.61
0.69
0.69
-003 = .060
= 1.52
± .003 in.
± .08 mm.
★ Cross Section Diameter:
-001 = .040
= 1.02
± .003 in.
± .08 mm.
-002 = .050
= 1.27
± .003 in.
± .08 mm.
1 For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
** These dash numbers are not included in MS 9068, MS 29561, NAS 1593 or NAS 1594 series.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
7
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions (Continued)
AN 6227B
AND
AN 6230B
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
DASH
NUMBERS
AN 1238561
TO
AN 123934
INCH
STANDARD
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
±
METRIC
STANDARD
(MM)
I.D.
±
-004 to -050 Cross Section Diameters = .070 ± .003 inches — 1.78 ± 0.08 millimeters.
-046
-047
-048
-049
-050
-046*††
-047*††
-048*††
-049*††
-050*††
4-1/4
4-1/2
4-3/4
5
5-1/4
x4-3/8
x4-5/8
x4-7/8
x5-1/8
x5-3/8
x1/16
x1/16
x1/16
x1/16
x1/16
4.239
4.489
4.739
4.989
5.239
.030
.030
.030
.037
.037
107.67
114.02
120.37
126.72
133.07
0.76
0.76
0.76
0.94
0.94
-102 to -178 Cross Section Diameters = .103 ± .003 inches — 2.62 ± 0.08 millimeters.
-102
-103
-104
-105
1/16
3/32
1/8
5/32
x 1/4
x 9/32
x 5/16
x 11/32
x3/32
x3/32
x3/32
x3/32
.049
.081
.112
.143
.005
.005
.005
.005
1.24
2.06
2.84
3.63
0.10
0.13
0.13
0.13
-106
-107
-108
-109
-110
AN 6227B-8
-110
AN 123863
3/16
7/32
1/4
5/16
3/8
x 3/8
x 13/32
x 7/16
x 1/2
x 9/16
x3/32
x3/32
x3/32
x3/32
x3/32
.174
.206
.237
.299
.362
.005
.005
.005
.005
.005
4.42
5.23
6.02
7.59
9.19
0.13
0.13
0.13
0.13
0.13
-111
-112
-113
-114
-115
AN 6227B-9
AN 6227B-10
AN 6227B-11
AN 6227B-12
AN 6227B-13
-111
-112
-113
-114
-115
AN 123864
AN 123865
AN 123866
AN 123867
AN 123868
7/16
1/2
9/16
5/8
11/16
x 5/8
x 11/16
x 3/4
x 13/16
x 7/8
x3/32
x3/32
x3/32
x3/32
x3/32
.424
.487
.549
.612
.674
.005
.005
.007
.009
.009
10.77
12.37
13.94
15.54
17.12
0.13
0.13
0.18
0.23
0.23
-116
-117
-118
-119
-120
AN 6227B-14
-116
-117
-118
-119
-120
AN 123869
3/4
13/16
7/8
15/16
1
x 15/16
x1
x1-1/16
x1-1/8
x1-3/16
x3/32
x3/32
x3/32
x3/32
x3/32
.737
.799
.862
.924
.987
.009
.010
.010
.010
.010
18.72
20.29
21.89
23.47
25.07
0.23
0.25
0.25
0.25
0.25
-121
-122
-123
-124
-125
-121
-122
-123
-124
-125
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
x1-1/4
x1-5/16
x1-3/8
x1-7/16
x1-1/2
x3/32
x3/32
x3/32
x3/32
x3/32
1.049
1.112
1.174
1.237
1.299
.010
.010
.012
.012
.012
26.64
28.24
29.82
31.42
32.99
0.25
0.25
0.30
0.30
0.30
-126
-127
-128
-129
-130
-126
-127
-128
-129
-130
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
x1-9/16
x1-5/8
x1-11/16
x1-3/4
x1-13/16
x3/32
x3/32
x3/32
x3/32
x3/32
1.362
1.424
1.487
1.549
1.612
.012
.012
.012
.015
.015
34.59
36.17
37.77
39.34
40.94
0.30
0.30
0.30
0.38
0.38
-131
-132
-133
-134
-135
-131
-132
-133
-134
-135
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
x1-7/8
x1-15/16
x2
x2-1/16
x2-1/8
x3/32
x3/32
x3/32
x3/32
x3/32
1.674
1.737
1.799
1.862
1.925
.015
.015
.015
.015
.017
42.52
44.12
45.69
47.29
48.90
0.38
0.38
0.38
0.38
0.43
-136
-137
-138
-139
-140
-136
-137
-138
-139
-140
2
2-1/16
2-1/8
2-3/16
2-1/4
x2-3/16
x2-1/4
x2-5/16
x2-3/8
x2-7/16
x3/32
x3/32
x3/32
x3/32
x3/32
1.987
2.050
2.112
2.175
2.237
.017
.017
.017
.017
.017
50.47
52.07
53.64
55.25
56.82
0.43
0.43
0.43
0.43
0.43
1 For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
** These dash numbers are not included in MS 9068, MS 29561, NAS 1593 or NAS 1594 series.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
8
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions (Continued)
AN 6227B
AND
AN 6230B
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
DASH
NUMBERS
AN 1238561
TO
AN 123934
INCH
STANDARD
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
±
METRIC
STANDARD
(MM)
I.D.
±
-102 to -178 Cross Section Diameters = .103 + .003 inches — 2.62 + 0.08 millimeters.
-141
-142
-143
-144
-145
-141
-142
-143
-144
-145
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
x2-1/2
x2-9/16
x2-5/8
x2-11/16
x2-3/4
x3/32
x3/32
x3/32
x3/32
x3/32
2.300
2.362
2.425
2.487
2.550
.020
.020
.020
.020
.020
58.42
59.99
61.60
63.17
64.77
0.51
0.51
0.51
0.51
0.51
-146
-147
-148
-149
-150
-146
-147
-148
-149
-150*
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
x2-13/16
x2-7/8
x2-15/16
x3
x3-1/16
x3/32
x3/32
x3/32
x3/32
x3/32
2.612
2.675
2.737
2.800
2.862
.020
.022
.022
.022
.022
66.34
67.95
69.52
71.12
72.69
0.51
0.56
0.56
0.56
0.56
-151
-152
-153
-154
-155
-151*
-152*
-153*
-154*
-155*
3
3-1/4
3-1/2
3-3/4
4
x3-3/16
x3-7/16
x3-11/16
x3-15/16
x4-3/16
x3/32
x3/32
x3/32
x3/32
x3/32
2.987
3.237
3.487
3.737
3.987
.024
.024
.024
.028
.028
75.87
82.22
88.57
94.92
101.27
0.61
0.61
0.61
0.71
0.71
-156
-157
-158
-159
-160
-156*
-157*
-158*
-159*
-160*
4-1/4
4-1/2
4-3/4
5
5-1/4
x4-7/16
x4-11/16
x4-15/16
x5-3/16
x5-7/16
x3/32
x3/32
x3/32
x3/32
x3/32
4.237
4.487
4.737
4.987
5.237
.030
.030
.030
.035
.035
107.62
113.97
120.32
126.67
133.02
0.76
0.76
0.76
0.89
0.89
-161
-162
-163
-164
-165
-161*
-162*
-163*††
-164*††
-165*††
5-1/2
5-3/4
6
6-1/4
6-1/2
x5-11/16
x5-15/16
x6-3/16
x6-7/16
x6-11/16
x3/32
x3/32
x3/32
x3/32
x3/32
5.487
5.737
5.987
6.237
6.487
.035
.035
.035
.040
.040
139.37
145.72
152.07
158.42
164.77
0.89
0.89
0.89
1.02
1.02
-166
-167
-168
-169
-170
-166*††
-167*††
-168*††
-169*††
-170*††
6-3/4
7
7-1/4
7-1/2
7-3/4
x6-15/16
x7-3/16
x7-7/16
x7-11/16
x7-15/16
x3/32
x3/32
x3/32
x3/32
x3/32
6.737
6.987
7.237
7.487
7.737
.040
.040
.045
.045
.045
171.12
177.47
183.82
190.17
196.52
1.02
1.02
1.14
1.14
1.14
-171
-172
-173
-174
-175
-171*††
-172*††
-173*††
-174*††
-175*††
8
8-1/4
8-1/2
8-3/4
9
x8-3/16
x8-7/16
x8-11/16
x8-15/16
x9-3/16
x3/32
x3/32
x3/32
x3/32
x3/32
7.987
8.237
8.487
8.737
8.987
.045
.050
.050
.050
.050
202.87
209.22
215.57
221.92
228.27
1.14
1.27
1.27
1.27
1.27
-176
-177
-178
-176*††
-177*††
-178*††
9-1/4
9-1/2
9-3/4
x9-7/16
x9-11/16
x9-15/16
x3/32
x3/32
x3/32
9.237
9.487
9.737
.055
.055
.055
234.62
240.97
247.32
1.40
1.40
1.40
.005
.005
.005
.005
.005
4.34
5.94
7.52
9.12
10.69
0.13
0.13
0.13
0.13
0.13
-201 to -284 Cross Section Diameters = .139 + .004 inches — 3.53 + 0.10 millimeters.
-201
-202
-203
-204
-205
3/16
1/4
5/16
3/8
7/16
x 7/16
x 1/2
x 9/16
x 5/8
x 11/16
x1/8
x1/8
x1/8
x1/8
x1/8
.171
.234
.296
.359
.421
1 For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
** These dash numbers are not included in MS 9068, MS 29561, NAS 1593 or NAS 1594 series.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
9
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions (Continued)
AN 6227B
AND
AN 6230B
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
DASH
NUMBERS
AN 1238561
TO
AN 123934
INCH
STANDARD
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
METRIC
STANDARD
(MM)
±
I.D.
±
-201 to -284 Cross Section Diameters = .139 ± .004 inches — 3.53 ± 0.10 millimeters.
-206
-207
-208
-209
-210
AN 123870
1/2
9/16
5/8
11/16
3/4
x 3/4
x 13/16
x 7/8
x 15/16
x1
x1/8
x1/8
x1/8
x1/8
x1/8
.484
.546
.609
.671
.734
.005
.007
.009
.009
.010
12.29
13.87
15.47
17.04
18.64
0.13
0.18
0.23
0.23
0.25
AN 6227B-15
-210
-211
-212
-213
-214
-215
AN 6227B-16
AN 6227B-17
AN 6227B-18
AN 6227B-19
AN 6227B-20
-211
-212
-213
-214
-215
AN 123871
AN 123872
AN 123873
AN 123874
AN 123875
13/16
7/8
15/16
1
1-1/16
x1-1/16
x1-1/8
x1-3/16
x1-1/4
x1-5/16
x1/8
x1/8
x1/8
x1/8
x1/8
.796
.859
.921
.984
1.046
.010
.010
.010
.010
.010
20.22
21.82
23.39
24.99
26.57
0.25
0.25
0.25
0.25
0.25
-216
-217
-218
-219
-220
AN 6227B-21
AN 6227B-22
AN 6227B-23
AN 6227B-24
AN 6227B-25
-216
-217
-218
-219
-220
AN 123876
AN 123877
AN 123878
AN 123879
AN 123880
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
x1-3/8
x1-7/16
x1-1/2
x1-9/16
x1-5/8
x1/8
x1/8
x1/8
x1/8
x1/8
1.109
1.171
1.234
1.296
1.359
.012
.012
.012
.012
.012
28.17
29.74
31.34
32.92
34.52
0.30
0.30
0.30
0.30
0.30
-221
-222
-223
-224
-225
AN 6227B-26
AN 6227B-27
AN 6230B-1
AN 6230B-2
AN 6230B-3
-221
-222
-223
-224
-225
AN 123881
AN 123882
AN 123883
AN 123884
AN 123885
1-7/16
1-1/2
1-5/8
1-3/4
1-7/8
x1-11/16
x1-3/4
x1-7/8
x2
x2-1/8
x1/8
x1/8
x1/8
x1/8
x1/8
1.421
1.484
1.609
1.734
1.859
.012
.015
.015
.015
.018
36.09
37.69
40.87
44.04
47.22
0.30
0.38
0.38
0.38
0.46
-226
-227
-228
-229
-230
AN 6230B-4
AN 6230B-5
AN 6230B-6
AN 6230B-7
AN 6230B-8
-226
-227
-228
-229
-230
AN 123886
AN 123887
AN 123888
AN 123889
AN 123890
2
2-1/8
2-1/4
2-3/8
2-1/2
x2-1/4
x2-3/8
x2-1/2
x2-5/8
x2-3/4
x1/8
x1/8
x1/8
x1/8
x1/8
1.984
2.109
2.234
2.359
2.484
.018
.018
.020
.020
.020
50.39
53.57
56.74
59.92
63.09
0.46
0.46
0.51
0.51
0.51
-231
-232
-233
-234
-235
AN 6230B-9
AN 6230B-10
AN 6230B-11
AN 6230B-12
AN 6230B-13
-231
-232
-233
-234
-235
AN 123891
AN 123892
AN 123893
AN 123894
AN 123895
2-5/8
2-3/4
2-7/8
3
3-1/8
x2-7/8
x3
x3-1/8
x3-1/4
x3-3/8
x1/8
x1/8
x1/8
x1/8
x1/8
2.609
2.734
2.859
2.984
3.109
.020
.024
.024
.024
.024
66.27
69.44
72.62
75.79
78.97
0.51
0.61
0.61
0.61
0.61
-236
-237
-238
-239
-240
AN 6230B-14
AN 6230B-15
AN 6230B-16
AN 6230B-17
AN 6230B-18
-236
-237
-238
-239
-240
AN 123896
AN 123897
AN 123898
AN 123899
AN 123900
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
x3-1/2
x3-5/8
x3-3/4
x3-7/8
x4
x1/8
x1/8
x1/8
x1/8
x1/8
3.234
3.359
3.484
3.609
3.734
.024
.024
.024
.028
.028
82.14
85.32
88.49
91.67
94.84
0.61
0.61
0.61
0.71
0.71
-241
-242
-243
-244
-245
AN 6230B-19
AN 6230B-20
AN 6230B-21
AN 6230B-22
AN 6230B-23
-241
-242
-243
-244
-245
AN 123901
AN 123902
AN 123903
AN 123904
AN 123905
3-7/8
4
4-1/8
4-1/4
4-3/8
x4-1/8
x4-1/4
x4-3/8
x4-1/2
x4-5/8
x1/8
x1/8
x1/8
x1/8
x1/8
3.859
3.984
4.109
4.234
4.359
.028
.028
.028
.030
.030
98.02
101.19
104.37
107.54
110.72
0.71
0.71
0.71
0.76
0.76
-246
-247
-248
-249
-250
AN 6230B-24
AN 6230B-25
AN 6230B-26
AN 6230B-27
AN 6230B-28
-246
-247
-248†
-249†
-250†
AN 123906
AN 123907
AN 123908
AN 123909
AN 123910
4-1/2
4-5/8
4-3/4
4-7/8
5
x4-3/4
x4-7/8
x5
x5-1/8
x5-1/4
x1/8
x1/8
x1/8
x1/8
x1/8
4.484
4.609
4.734
4.859
4.984
.030
.030
.030
.035
.035
113.89
117.07
120.24
123.42
126.59
0.76
0.76
0.76
0.89
0.89
1 For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
† These dash numbers are not included in MS 28775 series.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
10
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions (Continued)
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
AN 6227B
AND
AN 6230B
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
DASH
NUMBERS
AN 1238561
TO
AN 123934
INCH
STANDARD
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
±
METRIC
STANDARD
(MM)
I.D.
±
-201 to -284 Cross Section Diameters = .139 ± .004 inches — 3.53 ± 0.10 millimeters.
-251
-252
-253
-254
-255
AN 6230B29
AN 6230B30
AN 6230B31
AN 6230B32
AN 6230B33
-251†
-252†
-253†
-254†
-255†
AN 123911
AN 123912
AN 123913
AN 123914
AN 123915
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
x5-3/8
x5-1/2
x5-5/8
x5-3/4
x5-7/8
x1/8
x1/8
x1/8
x1/8
x1/8
5.109
5.234
5.359
5.484
5.609
.035
.035
.035
.035
.035
129.77
132.94
136.12
139.29
142.47
0.89
0.89
0.89
0.89
0.89
-256
-257
-258
-259
-260
AN 6230B34
AN 6230B35
AN 6230B36
AN 6230B37
AN 6230B38
-256†
-257†
-258†
-259†
-260†
AN 123916
AN 123917
AN 123918
AN 123919
AN 123920
5-3/4
5-7/8
6
6-1/4
6-1/2
x6
x6-1/8
x6-1/4
x6-1/2
x6-3/4
x1/8
x1/8
x1/8
x1/8
x1/8
5.734
5.859
5.984
6.234
6.484
.035
.035
.035
.040
.040
145.64
148.82
151.99
158.34
164.69
0.89
0.89
0.89
1.02
1.02
-261
-262
-263
-264
-265
AN 6230B39
AN 6230B40
AN 6230B41
AN 6230B42
AN 6230B43
-261†
-262†
-263†
-264†
-265†
AN 123921
AN 123922
AN 123923
AN 123924
AN 123925
6-3/4
7
7-1/4
7-1/2
7-3/4
x7
x7-1/4
x7-1/2
x7-3/4
x8
x1/8
x1/8
x1/8
x1/8
x1/8
6.734
6.984
7.234
7.484
7.734
.040
.040
.045
.045
.045
171.04
177.39
183.74
190.09
196.44
1.02
1.02
1.14
1.14
1.14
-266
-267
-268
-269
-270
AN 6230B44
AN 6230B45
AN 6230B46
AN 6230B47
AN 6230B48
-266†
-267†
-268†
-269†
-270†
AN 123926
AN 123927
AN 123928
AN 123929
AN 123930
8
8-1/4
8-1/2
8-3/4
9
x8-1/4
x8-1/2
x8-3/4
x9
x9-1/4
x1/8
x1/8
x1/8
x1/8
x1/8
7.984
8.234
8.484
8.734
8.984
.045
.050
.050
.050
.050
202.79
209.14
215.49
221.84
228.19
1.14
1.27
1.27
1.27
1.27
-271
-272
-273
-274
-275
AN 6230B49
AN 6230B50
AN 6230B51
AN 6230B52
-271†
-272†
-273†
-274†
-275*
AN 123931
AN 123932
AN 123933
AN 123934
9-1/4
9-1/2
9-3/4
10
10-1/2
x9-1/2
x9-3/4
x 10
x10-1/4
x10-3/4
x1/8
x1/8
x1/8
x1/8
x1/8
9.234
9.484
9.734
9.984
10.484
.055
.055
.055
.055
.055
234.54
240.89
247.24
253.59
266.29
1.40
1.40
1.40
1.40
1.40
-276
-277
-278
-279
-280
-276*
-277*
-278*
-279*
-280*
11
11-1/2
12
13
14
x11-1/4
x11-3/4
x12-1/4
x13-1/4
x14-1/4
x1/8
x1/8
x1/8
x1/8
x1/8
10.984
11.484
11.984
12.984
13.984
.065
.065
.065
.065
.065
278.99
291.69
304.39
329.79
355.19
1.65
1.65
1.65
1.65
1.65
-281
-282
-283
-284
-281*
-282*††
-283*††
-284*††
15
16
17
18
x15-1/4
x16-1/4
x17-1/4
x18-1/4
x1/8
x1/8
x1/8
x1/8
14.984
15.955
16.955
17.955
.065
.075
.080
.085
380.59
405.26
430.66
456.06
1.65
1.90
2.03
2.16
-309 to -395 Cross Section Diameters = .210 ± .005 inches — 5.33 ± 0.13 millimeters.
-309
-310
7/16
1/2
x13/16
x7/8
x3/16
x3/16
.412
.475
.005
.005
10.46
12.07
0.13
0.13
-311
-312
-313
-314
-315
9/16
5/8
11/16
3/4
13/16
x15/16
x1
x1-1/16
x1-1/8
x1-3/16
x3/16
x3/16
x3/16
x3/16
x3/16
.537
.600
.662
.725
.787
.007
.009
.009
.010
.010
13.64
15.24
16.81
18.42
19.99
0.18
0.23
0.23
0.25
0.25
1
*
†
††
For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
These dash numbers are not included in MS 28775.
These dash numbers are not included in MS 9068, NAS 1593 or NAS 1594.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
11
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions (Continued)
AN 6227B
AND
AN 6230B
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
DASH
NUMBERS
AN 1238561
TO
AN 123934
INCH
STANDARD
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
±
METRIC
STANDARD
(MM)
I.D.
±
-309 to -395 Cross Section Diameters = .210 ± .005 inches — 5.33 ± 0.13 millimeters.
-316
-317
-318
-319
-320
7/8
15-16
1
1-1/16
1-1/8
x1-1/4
x1-5/16
x1-3/8
x1-7/16
x1-1/2
x3/16
x3/16
x3/16
x3/16
x3/16
.850
.912
.975
1.037
1.100
.010
.010
.010
.010
.012
21.59
23.16
24.77
26.34
27.94
0.25
0.25
0.25
0.25
0.30
-321
-322
-323
-324
-325
AN 6227B-28
-325
1-3/16
1-1/4
1-5/16
1-3/8
1-1/2
x1-9/16
x1-5/8
x1-11/16
x1-3/4
x1-7/8
x3/16
x3/16
x3/16
x3/16
x3/16
1.162
1.225
1.287
1.350
1.475
.012
.012
.012
.012
.015
29.51
31.12
32.69
34.29
37.47
0.30
0.30
0 30
0.30
0.38
-326
-327
-328
-329
-330
AN 6227B-29
AN 6227B-30
AN 6227B-31
AN 6227B-32
AN 6227B-33
-326
-327
-328
-329
-330
1-5/8
1-3/4
1-7/8
2
2-1/8
x2
x2-1/8
x2-1/4
x2-3/8
x2-1/2
x3/16
x3/16
x3/16
x3/16
x3/16
1.600
1.725
1.850
1.975
2.100
.015
.015
.015
.018
.018
40.64
43.82
46.99
50.17
53.34
0.38
0.38
0.38
0.46
0.46
-331
-332
-333
-334
-335
AN 6227B-34
AN 6227B-35
AN 6227B-36
AN 6227B-37
AN 6227B-38
-331
-332
-333
-334
-335
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
x2-5/8
x2-3/4
x2-7/8
x3
x3-1/8
x3/16
x3/16
x3/16
x3/16
x3/16
2.225
2.350
2.475
2.600
2.725
.018
.018
.020
.020
.020
56.52
59.69
62.87
66.04
69.22
0.46
0.46
0.51
0.51
0.51
-336
-337
-338
-339
-340
AN 6227B-39
AN 6227B-40
AN 6227B-41
AN 6227B-42
AN 6227B-43
-336
-337
-338
-339
-340
2-7/8
3
3-1/8
3-1/4
3-3/8
x3-1/4
x3-3/8
x3-1/2
x3-5/8
x3-3/4
x3/16
x3/16
x3/16
x3/16
x3/16
2.850
2.975
3.100
3.225
3.350
.020
.024
.024
.024
.024
72.39
75.57
78.74
81.92
85.09
0.51
0.61
0.61
0.61
0.61
-341
-342
-343
-344
-345
AN 6227B-44
AN 6227B-45
AN 6227B-46
AN 6227B-47
AN 6227B-48
-341
-342
-343
-344
-345
3-1/2
3-5/8
3-3/4
3-7/8
4
x3-7/8
x4
x4-1/8
x4-1/4
x4-3/8
x3/16
x3/16
x3/16
x3/16
x3/16
3.475
3.600
3.725
3.850
3.975
.024
.028
.028
.028
.028
88.27
91.44
94.62
97.79
100.97
0.61
0.71
0.71
0.71
0.71
-346
-347
-348
-349
-350
AN 6227B-49
AN 6227B-50
AN 6227B-51
AN 6227B-52
-346
-347
-348
-349
-350*††
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
x4-1/2
x4-5/8
x4-3/4
x4-7/8
x5
x3/16
x3/16
x3/16
x3/16
x3/16
4.100
4.225
4.350
4.475
4.600
.028
.030
.030
.030
.030
104.14
107.32
110.49
113.67
116.84
0.71
0.76
0.76
0.76
0.76
-351
-352
-353
-354
-355
-351*††
-352*††
-353*††
-354*††
-355*††
4-3/4
4-7/8
5
5-1/8
5-1/4
x5-1/8
x5-1/4
x5-3/8
x5-1/2
x5-5/8
x3/16
x3/16
x3/16
x3/16
x3/16
4.725
4.850
4.975
5.100
5.225
.030
.030
.037
.037
.037
120.02
123.19
126.37
129.54
132.72
0.76
0 76
0.94
0.94
0 94
-356
-357
-358
-359
-360
-356*††
-357*††
-358*††
-359*††
-360*††
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
x5-3/4
x5-7/8
x6
x6-1/8
x6-1/4
x3/16
x3/16
x3/16
x3/16
x3/16
5.350
5.475
5.600
5.725
5.850
.037
.037
.037
.037
.037
135.89
139.07
142.24
145.42
148.59
0.94
0.94
0.94
0.94
0.94
1 For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
†† These dash numbers are not included in MS 9068, NAS 1593 or NAS 1594.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
12
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions (Continued)
AN 6227B
AND
AN 6230B
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
DASH
NUMBERS
AN 1238561
TO
AN 123934
INCH
STANDARD
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
±
METRIC
STANDARD
(MM)
I.D.
±
-309 to -395 Cross Section Diameters = .210 ± .005 inches — 5.33 ± 0.13 millimeters.
-361
-362
-363
-364
-365
-361*††
-362*††
-363*††
-364*††
-365*††
6
6-1/4
6-1/2
6-3/4
7
x6-3/8
x6-5/8
x6-7/8
x7-1/8
x7-3/8
x3/16
x3/16
x3/16
x3/16
x3/16
5.975
6.225
6.475
6.725
6.975
.037
.040
.040
.040
.040
151.77
158.12
164.47
170.82
177.17
0.94
1.02
1.02
1.02
1.02
-366
-367
-368
-369
-370
-366*††
-367*††
-368*††
-369*††
-370*††
7-1/4
7-1/2
7-3/4
8
8-1/4
x7-5/8
x7-7/8
x8-1/8
x8-3/8
x8-5/8
x3/16
x3/16
x3/16
x3/16
x3/16
7.225
7.475
7.725
7.975
8.225
.045
.045
.045
.045
.050
183.52
189.87
196.22
202.57
208.92
1.14
1.14
1 14
1.14
1.27
-371
-372
-373
-374
-375
-371*††
-372*††
-373*††
-374*††
-375*††
8-1/2
8-3/4
9
9-1/4
9-1/2
x8-7/8
x9-1/8
x9-3/8
x9-5/8
x9-7/8
x3/16
x3/16
x3/16
x3/16
x3/16
8.475
8.725
8.975
9.225
9.475
.050
.050
.050
.055
.055
215.27
221.62
227.97
234.32
240.67
1.27
1.27
1.27
1.40
1.40
-376
-377
-378
-379
-380
-376*††
-377*††
-378*††
-379*††
-380*††
9-3/4
10
10-1/2
11
11-1/2
x10-1/8
x10-3/8
x10-7/8
x11-3/8
x11-7/8
x3/16
x3/16
x3/16
x3/16
x3/16
9.725
9.975
10.475
10.975
11.475
.055
.055
.060
.060
.065
247.02
253.37
266.07
278.77
291.47
1.40
1.40
1.52
1.52
1.65
-381
-382
-383
-384
-385
-381*††
-382*††
-383*††
-384*††
-385*††
12
13
14
15
16
x12-3/8
x13-3/8
x14-3/8
x15-3/8
x16-3/8
x3/16
x3/16
x3/16
x3/16
x3/16
11.975
12.975
13.975
14.975
15.955
.065
.065
.070
.070
.075
304.17
329.57
354.97
380.37
405.26
1.65
1.65
1.78
1.78
1.90
-386
-387
-388
-389
-390
-386*††
-387*††
-388*††
-389*††
-390*††
17
18
19
20
21
x17-3/8
x18-3/8
x19-3/8
x20-3/8
x21-3/8
x3/16
x3/16
x3/16
x3/16
x3/16
16.955
17.955
18.955
19.955
20.955
.080
.085
.090
.095
.095
430.66
456.06
481.38
506.78
532.18
2.03
2.16
2.29
2.41
2.41
-391
-392
-393
-394
-395
-391*††
-392*††
-393*††
-394*††
-395*††
22
23
24
25
26
x22-3/8
x23-3/8
x24-3/8
x25-3/8
x26-3/8
x3/16
x3/16
x3/16
x3/16
x3/16
21.955
22.940
23.940
24.940
25.940
.095
.105
.110
.115
.120
557.58
582.68
608.08
633.48
658.88
2.41
2.67
2.79
2.92
3.05
.014
.014
.015
.016
.017
34.29
37.47
40.64
43.82
46.99
0.36
0.36
0.38
0.41
0.43
-400 to -424 Cross Section Diameters = .275 ± .006 inches — 6.99 ± 0.15 millimeters.
-400***
-401***
-402***
-403***
-404***
1
*
***
††
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
x1-7/8
x2
x2-1/8
x2-1/4
x2-3/8
x1/4
x1/4
x1/4
x1/4
x1/4
1.350
1.475
1.600
1.725
1.850
For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
Dash numbers 400-424 are not listed on AS 568A, but are stock items at American Packing in selected compounds.
These dash numbers are not included in MS 9068, NAS 1593 or NAS 1594.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
13
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions (Continued)
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
AN 6227B
AND
AN 6230B
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
DASH
NUMBERS
AN 1238561
TO
AN 123934
INCH
STANDARD
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
±
METRIC
STANDARD
(MM)
I.D.
±
-400 to -424 Cross Section Diameters = .275 ± .006 inches — 6.99 ± 0.15 millimeters.
-405***
-406***
-407***
-408***
-409***
2
2-1/8
2-1/4
2-3/8
2-1/2
x2-1/2
x2-5/8
x2-3/4
x2-7/8
x3
x1/4
x1/4
x1/4
x1/4
x1/4
1.975
2.100
2.225
2.350
2.475
.017
.018
.018
.018
.018
50.17
53.34
56.52
59.69
62.87
0.43
0.46
0.46
0.46
0.46
-410***
-411***
-412***
-413***
-414***
2-5/8
2-3/4
2-7/8
3
3-1/8
x3-1/8
x3-1/4
x3-3/8
x3-1/2
x3-5/8
x1/4
x1/4
x1/4
x1/4
x1/4
2.600
2.725
2.850
2.975
3.100
.018
.022
.022
.024
.024
66.04
69.22
72.39
75.57
78.74
0.46
0.56
0.56
0.61
0.61
-415***
-416***
-417***
-418***
-419***
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
x3-3/4
x3-7/8
x4
x4-1/8
x4-1/4
x1/4
x1/4
x1/4
x1/4
x1/4
3.225
3.350
3.475
3.600
3.725
.024
.026
.026
.026
.028
81.92
85.09
88.27
91.44
94.62
0.61
0.66
0.66
0.66
0.71
-420***
-421***
-422***
-423***
-424***
3-7/8
4
4-1/8
4-1/4
4-3/8
x4-3/8
x4-1/2
x4-5/8
x4-3/4
x4-7/8
x1/4
x1/4
x1/4
x1/4
x1/4
3.850
3.975
4.100
4.225
4.350
.028
.028
.030
.030
.030
97.79
100.97
104.14
107.32
110.49
0.71
0.71
0.76
0.76
0.76
.033
.033
.033
.033
.037
.037
113.67
116.84
120.02
123.19
126.37
129.54
0.84
0.84
0.84
0.84
0.94
0.94
-425 to -475 Cross Section Diameters = .275 ± .006 inches — 6.99 ± 0.15 millimeters.
-425
-426
-427
-428
-429
-430
AN 6227B-88
AN 6227B-53
AN 6227B-54
AN 6227B-55
AN 6227B-56
AN 6227B-57
-425
-426
-427
-428
-429
-430
4-1/2
4-5/8
4-3/4
4-7/8
5
5-1/8
x5
x5-1/8
x5-1/4
x5-3/8
x5-1/2
x5-5/8
x1/4
x1/4
x1/4
x1/4
x1/4
x1/4
4.475
4.600
4.725
4.850
4.975
5.100
-431
-432
-433
-434
-435
AN 6227B-58
AN 6227B-59
AN 6227B-60
AN 6227B-61
AN 6227B-62
-431
-432
-433
-434
-435
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
x5-3/4
x5-7/8
x6
x6-1/8
x6-1/4
x1/4
x1/4
x1/4
x1/4
x1/4
5.225
5.350
5.475
5.600
5.725
.037
.037
.037
.037
.037
132.72
135.89
139.07
142.24
145.42
0.94
0.94
0.94
0.94
0.94
-436
-437
-438
-439
-440
AN 6227B-63
AN 6227B-64
AN 6227B-65
AN 6227B-66
AN 6227B-67
-436
-437
-438
-439
-440
5-7/8
6
6-1/4
6-1/2
6-3/4
x6-3/8
x6-1/2
x6-3/4
x7
x7-1/4
x1/4
x1/4
x1/4
x1/4
x1/4
5.850
5.975
6.225
6.475
6.725
.037
.037
.040
.040
.040
148.59
151.77
158.12
164.47
170.82
0.94
0.94
1.02
1.02
1.02
-441
-442
-443
-444
-445
AN 6227B-68
AN 6227B-69
AN 6227B-70
AN 6227B-71
AN 6227B-72
-441
-442
-443
-444
-445
7
7-1/4
7-1/2
7-3/4
8
x7-1/2
x7-3/4
x8
x8-1/4
x8-1/2
x1/4
x1/4
x1/4
x1/4
x1/4
6.975
7.225
7.475
7.725
7.975
.040
.045
.045
.045
.045
177.17
183.52
189.87
196.22
202.57
1.02
1.14
1.14
1.14
1.14
1 For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
*** Dash numbers 400-424 are not listed on AS 568A, but are stock items at American Packing in selected compounds.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
14
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standard O-Ring Sizes and Dimensions (Continued)
MS 28775
MS 29513
MS 29561
MS 9021
MS 9068
NAS 1593
NAS 1594
NAS 1611
AN 6227B
AND
AN 6230B
AN 1238561
TO
AN 123934
INCH
STANDARD
AS-568A
UNIVERSAL
DASH
NUMBERS
PART
NUMBERS
-446
-447
-448
-449
-450
AN 6227B-73
AN 6227B-74
AN 6227B-75
AN 6227B-76
AN 6227B-77
-446
-447
-448
-449
-450
8-1/2
9
9-1/2
10
10-1/2
x9
x9-1/2
x10
x10-1/2
x11
x1/4
x1/4
x1/4
x1/4
x1/4
-451
-452
-453
-454
-455
AN 6227B-78
AN 6227B-79
AN 6227B-80
AN 6227B-81
AN 6227B-82
-451
-452
-453
-454
-455
11
11-1/2
12
12-1/2
13
x11-1/2
x12
x12-1/2
x13
x13-1/2
-456
-457
-458
-459
-460
AN 6227B-83
AN 6227B-84
AN 6227B-85
AN 6227B-86
AN 6227B-87
-456
-457
-458
-459
-460
13-1/2
14
14-1/2
15
15-1/2
-461
-462
-463
-464
-465
-461*††
-462*††
-463*††
-464*††
-465*††
-466
-467
-468
-469
-470
-471
-472
-473
-474
-475
DASH
NUMBERS
NOMINAL SIZE
PART
NUMBERS
I.D.
O.D.
C.S.
I.D.
METRIC
STANDARD
(MM)
±
I.D.
±
8.475
8.975
9.475
9.975
10.475
.055
.055
.055
.055
.060
215.27
227.97
240.67
253.37
266.07
1.40
1.40
1.40
1.40
1.52
x1/4
x1/4
x1/4
x1/4
x1/4
10.975
11.475
11.975
12.475
12.975
.060
.060
.060
.060
.060
278.77
291.47
304.17
316.87
329.57
1.52
1.52
1.52
1.52
1.52
x14
x14-1/2
x15
x15-1/2
x16
x1/4
x1/4
x1/4
x1/4
x1/4
13.475
13.975
14.475
14.975
15.475
.070
.070
.070
.070
.070
342.27
354.97
367.67
380.37
393.07
1.78
1.78
1.78
1.78
1.78
16
16-1/2
17
17-1/2
18
x16-1/2
x17
x17-1/2
x18
x18-1/2
x1/4
x1/4
x1/4
x1/4
x1/4
15.955
16.455
16.955
17.455
17.955
.075
.075
.080
.085
.085
405.26
417.96
430.66
443.36
456.06
1.90
1.90
2.03
2.15
2.15
-466*††
-467*††
-468*††
-469*††
-470*††
18-1/2
19
19-1/2
20
21
x19
x19-1/2
x20
x20-1/2
x21-1/2
x1/4
x1/4
x1/4
x1/4
x1/4
18.455
18.955
19.455
19.955
20.955
.085
.090
.090
.095
.095
468.76
481.46
494.16
506.86
532.26
2.15
2.29
2.29
2.41
2.41
-471*††
-472*††
-473*††
-474*††
-475*††
22
23
24
25
26
x22-1/2
x23-1/2
x24-1/2
x25-1/2
x26-1/2
x1/4
x1/4
x1/4
x1/4
x1/4
21.955
22.940
23.940
24.940
25.940
.100
.105
.110
.115
.120
557.66
582.68
608.08
633.48
658.88
2.55
2.67
2.79
2.92
3.05
-425 to -475 Cross Section Diameters = .275 ± .006 inches — 6.99 ± 0.15 millimeters.
1 For AN 123956 to AN 124034, add 100 to part numbers shown in this column.
* These dash numbers are not included in MS 28775, MS 29561 or NAS 1611 series.
†† These dash numbers are not included in MS 9068, NAS 1593 or NAS 1594.
NOTES: (1) “AN”, “MS”, and “NAS” information is for size cross-reference only. “AN”, “MS”, and “NAS” O-Rings require special compounds. APG O-Rings are available in a variety of
compounds.
(2) Actual dimensions for standard (AN) shrinkage materials only. These correspond to AS568A dimensions. O-Rings manufactured out of compounds with different shrinkage
rates (other than AN) will produce slightly different dimensions and tolerances.
15
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
*Dash Number Cross-References
AN 6227 / AS 568A
AN
6227
AS
568A
AN
6227
AS
568A
AN
6227
AS
568A
AN
6227
AS
568A
AN
6227
AS
568A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
006
007
008
009
010
011
012
110
111
112
113
114
115
116
210
211
212
213
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
214
215
216
217
218
219
220
221
222
325
326
327
328
329
330
331
332
333
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
426
427
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
425
AN 6230 / AS 568A
AN
6230
AS
568A
AN
6230
AS
568A
AN
6230
AS
568A
AN
6230
AS
568A
AN
6230
AS
568A
1
2
3
4
5
6
7
8
9
10
11
223
224
225
226
227
228
229
230
231
232
233
12
13
14
15
16
17
18
19
20
21
22
234
235
236
237
238
239
240
241
242
243
244
23
24
25
26
27
28
29
30
31
32
33
245
246
247
248
249
250
251
252
253
254
255
34
35
36
37
38
39
40
41
42
43
44
256
257
258
259
260
261
262
263
264
265
266
45
46
47
48
49
50
51
52
267
268
269
270
271
272
273
274
*These charts are for size cross-reference only. “AN” O-Rings require special compounds.
APG O-Rings are available in a variety of compounds.
16
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
O-Ring Boss Gaskets
For Straight Thread Tube Fittings
NAS 1595
NAS 1596
MS 9020
MS 29512
TUBE
SIZE
MS 28778
NAS 617
NAS 1612
AS 568A
DASH
NUMBERS
-901
-902
-903
-904
-905
-906
-907
-908
-909
-910
-911
-912
-913
-914
-916
-918
-920
-924
-928
-932
NOTE:
INCH
STANDARD
METRIC
STANDARD
INCH
STANDARD
METRIC
STANDARD
INSIDE
DIAMETER
INSIDE
DIAMETER
CROSSSECTION
CROSSSECTION
DASH
NUMBERS
DASH
NUMBERS
O.D.
INCHES
IN.
±
MM
±
IN.
±
MM
±
-2
-3
-4
-5
-01
-02
-03
-04
-05
3/32
1/8
3/16
1/4
5/16
.185
.239
.301
.351
.414
.005
.005
.005
.005
.005
4.70
6.07
7.65
8.92
10.52
.13
.13
.13
.13
.13
.056
.064
.064
.072
.072
.003
.003
.003
.003
.003
1.42
1.63
1.63
1.83
1.83
.08
.08
.08
.08
.08
-06
-07
-08
-09
-10
3/8
7/16
1/2
9/16
5/8
.468
.530
.644
.706
.755
.005
.007
.009
.009
.009
11.89
13.46
16.36
17.93
19.18
.13
.18
.23
.23
.23
.078
.082
.087
.097
.097
.003
.003
.003
.003
.003
1.98
2.08
2.21
2.46
2.46
.08
.08
.08
.08
.08
-16
-11
-12
-13
-14
-16
11/16
3/4
13/16
7/8
1
.863
.924
.986
1.047
1.171
.009
.009
.010
.010
.010
21.92
23.47
25.04
26.59
29.74
.23
.23
.25
.25
.25
.116
.116
.116
.116
.116
.004
.004
.004
.004
.004
2.95
2.95
2.95
2.95
2.95
.10
.10
.10
.10
.10
-20
-24
-28
-32
-18
-20
-24
-28
-32
1-1/8
1-1/4
1-1/2
1-3/4
2
1.355
1.475
1.720
2.090
2.337
.012
.014
.014
.018
.018
34.42
37.47
43.69
53.09
59.36
.30
.36
.36
.46
.46
.116
.118
.118
.118
.118
.004
.004
.004
.004
.004
2.95
3.00
3.00
3.00
3.00
.10
.10
.10
.10
.10
-6
-8
-10
-12
“NAS” and “MS” information is for size cross-reference only. “NAS and “MS” O-Rings require special compounds. APG O-Rings
are available in a variety of compounds.
17
www.callapg.com
713-675-5271
1-800-888-5223
Metric O-Rings *
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
0.70
0.80
0.81
0.84
0.90
0.97
X
X
X
X
X
X
1.80
22.80
5.36
6.10
22.80
2.54
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1.15
1.25
1.50
1.80
2.00
2.50
2.70
3.00
3.30
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.20
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
20.50
21.00
18
FAX 713-675-2730
FAX 1-800-444-3252
*The following listing of metric O-Ring sizes includes cross reference
information for American Standard (AS 568A) O-Ring sizes, Japanese
Metric O-Rings, and British Standard Metric O-Rings. AS 568A dash
numbers are shaded; G, P, S, and V numbers are Japanese Metric ORings; and BS numbers are British Standard Metric O-Rings. This is a
comprehensive listing, and APG stocks most of the sizes. Some sizes,
however, are not commonly used and and are not standard stock items.
Call for availability.
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
21.50
22.00
22.50
23.00
23.50
24.00
24.50
25.00
28.00
29.40
29.90
30.50
31.80
32.00
39.00
42.00
60.00
1.02 X
1.02 X
1.02 X
.74
1.78
2.54
1.15 X
42.10
1.19 X
4.32
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
1.20
X
X
X
X
X
X
X
X
X
X
X
2.50
2.60
3.50
5.00
24.00
26.00
28.00
35.00
40.00
53.50
98.00
1.25 X
1.25 X
1.25 X
3.80
8.00
16.00
1.27
1.27
1.27
1.27
X
X
X
X
1.07
3.25
3.91
4.47
1.30
1.30
1.30
1.30
1.30
1.30
X
X
X
X
X
X
2.50
8.00
10.00
11.00
13.50
20.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
1.42 X
-001
-001-1/2BS606
BS607
-002
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4.70
1.80
1.85
2.00
2.50
2.80
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
10.70
11.00
11.50
12.00
12.50
13.00
13.25
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
20.50
21.00
21.50
22.00
22.50
23.00
23.50
24.00
24.50
-901
S3
S4
S5
S6
S7
S8
S9
S10
S11.2
S12
S12.5
S14
S15
S16
S18
S20
S22
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
25.00
25.50
26.00
26.50
27.00
27.50
28.00
28.50
29.00
29.50
30.00
30.50
31.00
31.50
32.00
32.50
33.00
33.50
34.00
34.50
35.00
35.50
36.00
36.50
37.00
37.50
38.00
38.50
39.00
39.50
40.00
41.00
42.00
43.00
44.00
45.00
46.00
47.00
48.00
49.00
50.00
51.00
52.00
53.00
54.00
55.00
56.00
57.00
58.00
59.00
60.00
61.00
62.00
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
X 63.00
X 64.00
X 65.00
X 66.00
X 67.00
X 68.00
X 69.00
X 70.00
X 71.00
X 72.00
X 73.00
X 74.00
X 75.00
X 76.00
X 77.00
X 78.00
X 79.00
X 80.00
X 81.00
X 82.00
X 83.00
X 84.00
X 85.00
X 86.00
X 87.00
X 88.00
X 89.00
X 90.00
X 91.00
X 92.00
X 93.00
X 94.00
X 95.00
X 96.00
X 97.00
X 98.00
X 99.00
X 100.00
1.52 X
1.42
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
2.20
2.75
2.80
3.10
3.20
3.70
4.10
4.70
5.00
5.10
6.10
7.10
X
X
X
X
X
X
X
X
X
X
X
X
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.60
X
8.10
X
9.10
X 10.10
X 11.10
X 12.10
X 13.10
X 14.10
X 15.10
X 16.10
X 17.10
X 18.10
X 19.10
X 20.30
X 21.10
X 22.10
X 25.10
X 27.10
X 29.10
X 32.10
X 35.10
X 37.10
X 51.10
X 86.00
X 96.60
X 115.00
1.63 X
1.63 X
-003
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
6.07
7.65
1.78
2.57
2.90
3.17
3.68
4.47
4.76
5.28
6.07
6.35
6.75
7.65
7.94
8.73
9.25
9.52
10.82
11.11
11.91
12.42
14.00
15.60
17.17
18.77
-902
-903
-004
-005
-006
BS801
-007
-008
BS802
-009
-010
BS803
BS610
-011
BS804
BS611
-012
-013
BS806
-014
-015
-016
-017
-018
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
19.05
19.15
20.35
21.47
21.95
23.52
25.12
26.70
28.30
29.87
31.47
33.05
34.65
36.00
36.27
37.82
39.45
41.00
44.17
45.84
47.35
50.52
53.70
56.87
60.05
63.22
66.40
69.57
72.75
75.92
79.00
82.27
85.34
88.62
91.70
94.97
98.05
101.32
104.40
107.67
110.74
114.02
117.10
120.37
123.44
126.72
129.40
133.07
135.76
138.94
142.11
145.29
148.46
-019
-020
-021
-022
-023
-024
-025
-026
-027
-028
BS517
-029
BS519
-030
-031
-032
-033
-034
-035
-036
-037
-038
-039
-040
-041
BS532
-042
BS534
-043
BS536
-044
BS538
-045
BS540
-046
BS542
-047
BS544
-048
BS546
-049
BS548
-050
BS550
BS551
BS552
BS553
BS554
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
X
X
X
X
X
X
X
X
151.64
154.81
158.00
161.16
164.34
167.51
170.69
173.87
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
1.80
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1.80
2.00
2.24
2.50
2.80
3.15
3.55
3.75
4.00
4.50
4.87
5.00
5.15
5.30
5.60
6.00
6.30
6.70
6.90
7.10
7.50
8.00
8.50
8.76
9.00
9.50
10.00
10.60
11.20
11.80
12.50
13.20
14.00
15.00
16.00
17.00
1.83 X
1.83 X
8.92
10.52
1.90
1.90
1.90
1.90
X
X
X
X
2.40
2.60
2.80
3.40
BS555
BS556
BS557
BS558
BS559
BS560
BS561
BS562
-904
-905
P3
19
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
1.90
1.90
1.90
1.90
1.90
1.90
1.90
1.90
1.90
1.90
1.90
1.90
1.90
1.90
1.90
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3.70
3.80
4.20
4.80
4.90
5.70
5.80
6.40
6.80
7.20
7.80
8.00
8.80
8.90
9.80
1.92 X
67.10
1.98 X
11.89
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.60
3.00
3.50
4.00
4.50
4.60
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
20
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
P4
P5
P6
P7
P8
P9
P10
-906
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
17.50
18.00
18.50
19.00
19.50
20.00
20.50
21.00
21.50
21.90
22.00
22.50
23.00
23.50
24.00
24.50
25.00
25.50
26.00
26.50
27.00
27.50
28.00
28.50
29.00
29.50
30.00
30.50
31.00
31.50
32.00
32.50
33.00
33.50
34.00
34.50
35.00
35.50
36.00
36.50
37.00
37.50
38.00
38.50
39.00
39.50
40.00
41.00
41.50
42.00
42.50
43.00
43.50
S22.4
S24
S25
S26
S28
S29
S30
S31.5
S32
S34
S35
S35.5
S36
S38
S39
S40
S42
S43
S44
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
44.00
44.50
45.00
45.50
46.00
47.00
47.50
48.00
49.00
49.50
50.00
51.00
52.00
52.50
53.00
54.00
54.50
55.00
55.50
56.00
57.00
58.00
59.00
59.50
60.00
61.00
62.00
62.50
63.00
64.00
64.50
65.00
66.00
66.50
67.00
68.00
69.00
69.50
70.00
70.50
71.00
72.00
73.00
74.00
74.50
75.00
76.00
77.00
78.00
79.00
79.50
80.00
81.00
S45
S46
S48
S50
S53
S55
S56
S60
S63
S65
S67
S70
S71
S75
S80
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
82.00
83.00
84.00
84.50
85.00
86.00
87.00
88.00
89.00
89.50
90.00
91.00
92.00
93.00
94.00
94.50
95.00
96.00
97.00
98.00
99.00
99.50
100.00
102.00
104.50
105.00
109.00
109.50
110.00
111.50
114.50
115.00
119.50
120.00
124.50
125.60
129.50
130.00
131.50
134.50
139.50
140.00
144.50
149.50
165.00
180.00
194.00
2.08 X
13.46
2.18 X
12.40
2.20 X
6.00
S85
S90
S95
S100
S105
S110
S112
S115
S120
S125
S130
S132
S135
S140
S145
S150
-907
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.20 X
2.20 X
2.20 X
9.00
10.00
18.00
2.21 X
16.36
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
3.30
3.60
4.30
4.60
5.30
5.50
5.60
6.30
6.60
7.30
7.50
7.60
8.00
8.30
8.60
9.30
9.60
9.80
10.30
10.50
10.60
10.80
11.00
11.30
11.50
11.60
11.80
12.30
12.60
13.30
13.50
13.60
13.80
14.30
14.50
14.60
14.80
15.30
15.50
15.60
15.80
15.90
16.30
16.60
17.30
17.50
17.60
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-908
P10A
P11
P11.2
P12
P12.5
P14
P15
P16
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
X 17.80
X 18.30
X 18.60
X 19.30
X 19.60
X 19.80
X 20.30
X 20.50
X 20.80
X 21.30
X 21.50
X 21.60
X 21.80
X 22.30
X 22.60
X 23.30
X 23.50
X 23.60
X 24.30
X 24.50
X 24.60
X 25.00
X 25.30
X 25.60
X 27.30
X 27.50
X 27.60
X 29.60
X 30.30
X 31.60
X 33.30
X 34.60
X 36.50
X 37.60
X 39.60
X 41.60
X 44.60
X 47.60
X 49.60
X 51.60
X 54.60
X 57.60
X 59.60
X 61.60
X 64.60
X 67.60
X 69.60
X 161.60
2.46 X
2.46 X
17.93
19.18
2.50 X
4.00
P18
P20
P21
P22
-909
-910
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4.60
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.50
19.00
19.50
20.00
20.50
21.00
21.50
22.00
22.50
23.00
23.50
24.00
24.50
25.00
25.50
26.00
26.50
27.00
27.50
28.00
28.50
29.00
29.50
30.00
30.50
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
31.00
31.50
32.00
32.50
33.00
33.50
34.00
34.50
35.00
35.50
36.00
36.50
37.00
37.50
38.00
38.50
39.00
39.50
40.00
41.00
42.00
43.00
44.00
45.00
46.00
47.00
48.00
49.00
50.00
51.00
52.00
53.00
54.00
55.00
56.00
57.00
58.00
59.00
60.00
61.00
62.00
63.00
64.00
65.00
66.00
67.00
68.00
69.00
70.00
71.00
72.00
73.00
74.00
21
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
22
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
75.00
76.00
77.00
78.00
79.00
80.00
81.00
82.00
83.00
84.00
85.00
86.00
87.00
88.00
89.00
90.00
91.00
92.00
93.00
94.00
95.00
96.00
97.00
98.00
99.00
100.00
101.00
102.00
103.00
104.00
105.00
106.00
107.00
108.00
109.00
110.00
111.00
112.00
113.00
114.00
115.00
116.00
117.00
118.00
119.00
120.00
121.00
122.00
123.00
124.00
125.00
126.00
127.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
128.00
129.00
130.00
131.00
132.00
133.00
134.00
135.00
136.00
137.00
138.00
139.00
140.00
141.00
142.00
143.00
144.00
145.00
146.00
147.00
148.00
149.00
150.00
2.55 X
29.10
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
1.24
2.06
2.84
3.63
4.42
5.23
6.02
7.59
9.13
9.19
9.90
10.77
11.91
12.37
12.70
13.10
13.94
15.08
15.54
15.88
17.12
17.46
17.86
18.72
20.30
20.64
21.89
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-102
-103
-104
-105
-106
-107
-108
-109
-110
BS613
-111
BS614
-112
BS807
BS615
-113
BS616
-114
BS809
-115
BS810
BS617
-116
-117
BS812
-118
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
2.62 X
22.23
23.47
23.81
25.07
26.64
28.24
29.82
31.42
32.99
34.59
36.17
37.77
39.34
40.94
42.52
44.12
45.69
47.29
48.90
50.47
52.07
53.64
55.25
56.82
58.42
59.99
61.60
63.17
64.77
66.34
67.95
69.52
71.12
72.69
74.30
75.87
77.50
80.60
82.22
83.80
88.57
92.75
94.92
101.27
107.62
113.97
120.32
126.67
133.02
139.37
145.72
152.07
158.42
BS813
-119
BS814
-120
-121
-122
-123
-124
-125
-126
-127
-128
-129
-130
-131
-132
-133
-134
-135
-136
-137
-138
-139
-140
-141
-142
-143
-144
-145
-146
-147
-148
-149
-150
BS640
-151
BS641
BS642
-152
BS643
-153
-154
-155
-156
-157
-158
-159
-160
-161
-162
-163
-164
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
X
X
X
X
X
X
X
X
X
X
X
X
X
X
164.77
171.12
177.47
183.82
190.17
196.52
202.87
209.22
215.57
221.92
228.27
234.62
240.97
247.32
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
14.00
15.00
16.00
17.00
18.00
19.00
20.00
21.20
22.40
23.60
25.00
25.80
26.50
28.00
30.00
31.50
32.50
33.50
34.50
35.50
36.50
37.50
38.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
X
8.35
X
8.90
X 10.50
X 12.10
X 13.60
X 15.10
X 16.90
X 18.40
X 18.60
X 27.30
X 28.40
X 117.00
2.92 X
9.53
-165
-166
-167
-168
-169
-170
-171
-172
-173
-174
-175
-176
-177
-178
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
2.95
2.95
2.95
2.95
2.95
2.95
X
X
X
X
X
X
21.92
23.47
25.04
26.59
29.74
34.42
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.00
10.50
11.00
11.50
12.00
12.50
13.00
13.50
14.00
14.50
15.00
15.50
16.00
16.50
17.00
17.50
18.00
18.20
18.50
19.00
19.20
19.50
20.00
20.50
21.00
21.50
22.00
22.20
22.50
23.00
23.50
24.00
-911
-912
-913
-914
-916
-918
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
24.20
24.50
24.60
25.00
25.20
25.50
26.00
26.20
26.50
27.00
27.50
28.00
28.50
29.00
29.20
29.50
30.00
30.20
30.50
31.00
31.50
32.00
32.20
32.50
33.00
33.50
34.00
34.20
34.50
35.00
35.50
36.00
36.20
36.50
37.00
37.20
37.47
37.50
38.00
38.50
39.00
39.20
39.50
40.00
40.20
41.00
41.50
42.00
42.20
42.50
43.00
43.69
44.00
-920
-924
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
44.20
44.50
45.00
46.00
47.00
48.00
49.00
49.50
50.00
50.50
51.00
52.00
53.00
53.09
54.00
54.20
54.50
55.00
56.00
56.20
57.00
58.00
59.00
59.36
59.50
60.00
61.00
62.00
62.20
63.00
64.00
64.50
65.00
66.00
67.00
68.00
69.00
69.50
70.00
71.00
72.00
73.00
74.00
74.50
75.00
76.00
77.00
78.00
79.00
79.50
80.00
81.00
82.00
-928
-932
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
83.00
84.00
84.50
85.00
86.00
87.00
88.00
89.00
89.50
90.00
91.00
92.00
93.00
94.00
94.50
95.00
96.00
97.00
98.00
99.00
99.50
100.00
101.00
102.00
103.00
104.00
104.50
105.00
106.00
107.00
108.00
109.00
109.50
110.00
111.00
112.00
113.00
114.00
114.50
115.00
116.00
117.00
118.00
119.00
119.50
120.00
121.00
122.00
123.00
124.00
124.50
125.00
126.00
23
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
3.00 X
24
126.50
127.00
128.00
129.00
129.50
130.00
131.00
132.00
133.00
134.00
134.50
135.00
136.00
137.00
138.00
139.00
139.50
140.00
141.00
142.00
143.00
144.00
144.50
145.00
146.00
147.00
148.00
149.00
149.50
150.00
151.00
152.00
153.00
154.00
154.50
155.00
156.00
157.00
158.00
159.00
159.50
160.00
161.00
162.00
163.00
164.00
164.50
165.00
166.00
167.00
168.00
169.00
169.50
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
170.00
171.00
172.00
173.00
174.00
174.50
175.00
176.00
177.00
178.00
179.00
179.50
180.00
181.00
182.00
183.00
183.50
184.00
184.50
185.00
186.00
187.00
188.00
189.00
189.50
190.00
191.00
192.00
193.00
194.00
194.50
195.00
196.00
197.00
198.00
199.00
199.50
200.00
201.00
202.00
203.00
204.00
204.50
205.00
206.00
207.00
208.00
209.00
209.50
210.00
211.00
212.00
213.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
214.00
215.00
216.00
217.00
218.00
219.00
219.50
220.00
221.00
222.00
223.00
224.00
225.00
226.00
227.00
228.00
229.00
229.50
230.00
231.00
232.00
233.00
234.00
235.00
236.00
237.00
238.00
239.00
239.50
240.00
241.00
242.00
243.00
244.00
245.00
246.00
247.00
248.00
249.00
249.50
250.00
255.00
259.30
260.00
264.00
270.00
280.00
300.00
315.00
320.00
350.00
440.00
505.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.00 X 518.50
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
3.10
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
24.40
29.40
34.40
39.40
44.40
49.40
54.40
59.40
64.40
69.40
74.40
79.40
84.40
89.40
94.40
99.40
104.40
109.40
114.40
119.40
124.40
129.40
134.40
139.40
144.40
G25
G30
G35
G40
G45
G50
G55
G60
G65
G70
G75
G80
G85
G90
G95
G100
G105
G110
G115
G120
G125
G130
G135
G140
G145
3.20 X 174.00
3.20 X 219.50
3.20 X 227.00
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
5.00
8.00
9.00
9.20
10.00
11.00
12.00
13.00
14.00
15.00
16.00
17.00
17.50
18.00
19.00
20.00
21.00
21.70
22.00
22.10
23.00
P22A
P22.4
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
23.70
24.00
24.70
25.00
25.20
25.70
26.00
27.00
27.70
28.00
28.70
29.00
29.20
29.70
30.00
30.50
30.70
31.00
31.20
31.70
32.00
33.00
33.70
34.00
34.70
35.00
35.20
35.70
36.00
37.00
37.70
38.00
38.70
39.00
39.70
40.00
40.70
41.00
41.70
42.00
43.00
43.70
44.00
44.70
45.00
45.70
46.00
47.00
47.70
48.00
48.70
49.00
49.70
P24
P25
P25.5
P26
P28
P29
P29.5
P30
P31
P31.5
P32
P34
P35
P35.5
P36
P38
P39
P40
P41
P42
P44
P45
P46
P48
P49
P50
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X 50.00
X 51.00
X 52.00
X 53.00
X 54.00
X 55.00
X 56.00
X 57.00
X 58.00
X 59.00
X 60.00
X 61.00
X 62.00
X 63.00
X 64.00
X 65.00
X 66.00
X 67.00
X 68.00
X 69.00
X 70.00
X 71.00
X 72.00
X 73.00
X 74.00
X 75.00
X 76.00
X 77.00
X 78.00
X 79.00
X 80.00
X 81.00
X 82.00
X 83.00
X 84.00
X 85.00
X 86.00
X 87.00
X 88.00
X 89.00
X 90.00
X 91.00
X 92.00
X 93.00
X 94.00
X 95.00
X 96.00
X 97.00
X 98.00
X 99.00
X 100.00
X 101.00
X 102.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
103.00
104.00
105.00
106.00
107.00
108.00
109.00
110.00
111.00
112.00
113.00
114.00
115.00
116.00
117.00
118.00
119.00
120.00
121.00
122.00
123.00
124.00
125.00
126.00
127.00
128.00
129.00
130.00
131.00
132.00
133.00
134.00
135.00
136.00
137.00
138.00
139.00
140.00
141.00
142.00
143.00
144.00
145.00
146.00
147.00
148.00
149.00
150.00
151.00
152.00
153.00
154.00
155.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
156.00
157.00
158.00
159.00
160.00
161.00
162.00
163.00
164.00
165.00
166.00
167.00
168.00
169.00
170.00
171.00
172.00
173.00
174.00
175.00
176.00
177.00
178.00
179.00
180.00
181.00
182.00
183.00
184.00
185.00
186.00
187.00
188.00
189.00
190.00
191.00
192.00
193.00
194.00
195.00
196.00
197.00
198.00
199.00
200.00
201.00
202.00
203.00
204.00
205.00
206.00
207.00
208.00
25
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
26
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
209.00
210.00
211.00
212.00
213.00
214.00
215.00
216.00
217.00
218.00
219.00
220.00
221.00
222.00
223.00
224.00
225.00
226.00
227.00
228.00
229.00
230.00
231.00
232.00
233.00
234.00
235.00
236.00
237.00
238.00
239.00
240.00
241.00
242.00
243.00
244.00
245.00
246.00
247.00
248.00
249.00
250.00
251.00
252.00
253.00
254.00
255.00
256.00
257.00
258.00
259.00
260.00
261.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
262.00
263.00
264.00
265.00
266.00
267.00
268.00
269.00
270.00
271.00
272.00
273.00
274.00
275.00
276.00
277.00
278.00
279.00
280.00
281.00
282.00
283.00
284.00
285.00
286.00
287.00
288.00
289.00
290.00
291.00
292.00
293.00
294.00
295.00
296.00
297.00
298.00
299.00
300.00
301.00
302.00
303.00
304.00
305.00
306.00
307.00
308.00
309.00
310.00
311.00
312.00
313.00
314.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
315.00
316.00
317.00
318.00
319.00
320.00
321.00
322.00
323.00
324.00
325.00
326.00
327.00
328.00
329.00
330.00
331.00
332.00
333.00
334.00
335.00
336.00
337.00
338.00
339.00
340.00
341.00
342.00
343.00
344.00
345.00
346.00
347.00
348.00
349.00
350.00
351.00
352.00
353.00
354.00
355.00
356.00
357.00
358.00
359.00
360.00
361.00
362.00
363.00
364.00
365.00
366.00
367.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
368.00
369.00
370.00
371.00
372.00
373.00
374.00
375.00
376.00
377.00
378.00
379.00
380.00
381.00
382.00
383.00
384.00
385.00
386.00
387.00
388.00
389.00
390.00
391.00
392.00
393.00
394.00
395.00
396.00
397.00
398.00
399.00
400.00
401.00
402.00
403.00
404.00
405.00
406.00
407.00
408.00
409.00
410.00
411.00
412.00
413.00
414.00
415.00
416.00
417.00
418.00
419.00
420.00
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
421.00
422.00
423.00
424.00
425.00
426.00
427.00
428.00
429.00
430.00
431.00
432.00
433.00
434.00
435.00
436.00
437.00
438.00
439.00
440.00
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4.34
5.94
7.52
9.12
10.69
12.29
13.87
15.47
17.04
18.64
20.22
21.82
23.39
24.99
25.80
26.57
28.17
29.74
31.34
32.92
34.52
36.09
37.69
39.70
40.87
41.28
42.86
44.04
44.45
46.04
47.22
47.62
-201
-202
-203
-204
-205
-206
-207
-208
-209
-210
-211
-212
-213
-214
BS618
-215
-216
-217
-218
-219
-220
-221
-222
BS824
-223
BS825
BS826
-224
BS827
BS828
-225
BS829
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
49.20
50.39
50.80
52.40
53.57
53.97
55.56
56.74
57.15
58.74
59.92
60.32
61.90
63.09
63.50
65.10
66.27
66.67
68.26
69.44
69.85
71.44
72.62
73.02
74.60
75.79
78.97
82.14
85.32
88.49
91.67
94.84
98.02
101.19
104.37
107.54
110.72
113.89
117.07
120.24
123.42
126.59
129.77
132.94
136.12
139.29
142.47
145.64
148.82
151.99
158.34
158.82
164.69
BS830
-226
BS831
BS832
-227
BS833
BS834
-228
BS835
BS836
-229
BS837
BS838
-230
BS839
BS840
-231
BS841
BS842
-232
BS843
BS844
-233
BS845
BS846
-234
-235
-236
-237
-238
-239
-240
-241
-242
-243
-244
-245
-246
-247
-248
-249
-250
-251
-252
-253
-254
-255
-256
-257
-258
-259
-260
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
3.53
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
171.04
177.39
183.74
190.09
196.44
202.79
209.14
215.49
221.84
228.19
234.54
240.89
247.24
253.59
266.29
278.99
291.69
304.39
319.20
329.79
355.19
380.59
405.26
430.66
456.06
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
18.00
19.00
20.00
21.20
22.40
23.60
25.00
25.80
26.50
28.00
30.00
31.50
32.50
33.50
34.50
35.50
36.50
37.50
38.70
40.00
41.20
42.50
43.70
45.00
46.20
47.50
48.70
-261
-262
-263
-264
-265
-266
-267
-268
-269
-270
-271
-272
-273
-274
-275
-276
-277
-278
-279
-280
-281
-282
-283
-284
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
3.55
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
50.00
51.50
53.00
54.50
56.00
58.00
60.00
61.50
63.00
65.00
67.00
69.00
71.00
73.00
75.00
77.50
80.00
82.50
85.00
87.50
90.00
92.50
95.00
97.50
100.00
103.00
106.00
109.00
112.00
115.00
118.00
122.00
125.00
128.00
132.00
136.00
140.00
145.00
150.00
155.00
160.00
165.00
170.00
175.00
180.00
185.00
190.00
195.00
200.00
3.60 X
3.60 X
3.60 X
18.30
19.80
21.30
27
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
X
X
X
X
X
X
X
X
X
X
X
23.00
24.60
26.20
27.80
29.30
30.80
32.50
34.10
35.60
37.30
43.40
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4.00
5.00
6.00
7.00
7.60
8.00
9.00
10.00
11.00
12.00
13.00
14.00
14.50
15.00
16.00
17.00
18.00
19.00
20.00
21.00
22.00
23.00
23.50
24.00
25.00
26.00
27.00
28.00
29.00
30.00
31.00
32.00
33.00
33.50
34.00
35.00
36.00
37.00
38.00
39.00
39.50
28
V15
V24
V34
V40
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
40.00
41.00
42.00
43.00
44.00
45.00
46.00
47.00
48.00
49.00
50.00
51.00
52.00
53.00
54.00
54.50
55.00
56.00
57.00
58.00
59.00
60.00
61.00
62.00
63.00
64.00
65.00
66.00
67.00
68.00
69.00
70.00
71.00
72.00
73.00
74.00
75.00
76.00
77.00
78.00
79.00
80.00
81.00
82.00
83.00
84.00
85.00
86.00
86.50
87.00
88.00
89.00
90.00
V55
V70
V85
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
91.00
92.00
93.00
94.00
95.00
96.00
97.00
98.00
99.00
100.00
101.00
102.00
103.00
104.00
105.00
106.00
107.00
108.00
109.00
110.00
111.00
112.00
113.00
114.00
115.00
116.00
117.00
118.00
119.00
120.00
121.00
122.00
123.00
124.00
125.00
126.00
127.00
128.00
129.00
130.00
131.00
132.00
133.00
134.00
135.00
136.00
137.00
138.00
139.00
140.00
141.00
142.00
143.00
V100
V120
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
144.00
145.00
146.00
147.00
148.00
148.50
149.00
150.00
151.00
152.00
153.00
154.00
155.00
156.00
157.00
158.00
159.00
160.00
161.00
162.00
163.00
164.00
165.00
166.00
167.00
168.00
169.00
170.00
171.00
172.00
173.00
174.00
175.00
176.00
177.00
178.00
179.00
180.00
181.00
182.00
183.00
184.00
185.00
186.00
187.00
188.00
189.00
190.00
191.00
192.00
193.00
194.00
195.00
V150
V175
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
196.00
197.00
198.00
199.00
200.00
201.00
202.00
203.00
204.00
205.00
206.00
207.00
208.00
209.00
210.00
211.00
212.00
213.00
214.00
215.00
216.00
217.00
218.00
219.00
220.00
221.00
222.00
223.00
224.00
225.00
226.00
227.00
228.00
229.00
230.00
231.00
232.00
233.00
234.00
235.00
236.00
237.00
238.00
239.00
240.00
241.00
242.00
243.00
244.00
245.00
246.00
247.00
248.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
4.00 X
249.00
250.00
251.00
252.00
253.00
254.00
255.00
256.00
257.00
258.00
259.00
260.00
261.00
262.00
263.00
264.00
265.00
266.00
267.00
268.00
269.00
270.00
271.00
272.00
273.00
274.00
275.00
276.00
277.00
278.00
279.00
280.00
281.00
282.00
283.00
284.00
285.00
286.00
287.00
288.00
289.00
290.00
291.00
292.00
293.00
294.00
295.00
296.00
297.00
298.00
299.00
300.00
301.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
302.00
303.00
304.00
305.00
306.00
307.00
308.00
309.00
310.00
311.00
312.00
313.00
314.00
315.00
316.00
317.00
318.00
319.00
320.00
321.00
322.00
323.00
324.00
325.00
326.00
327.00
328.00
329.00
330.00
331.00
332.00
333.00
334.00
335.00
336.00
337.00
338.00
339.00
340.00
341.00
342.00
343.00
344.00
345.00
346.00
347.00
348.00
349.00
350.00
351.00
352.00
353.00
354.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
355.00
356.00
357.00
358.00
359.00
360.00
361.00
362.00
363.00
364.00
365.00
366.00
367.00
368.00
369.00
370.00
371.00
372.00
373.00
374.00
375.00
376.00
377.00
378.00
379.00
380.00
381.00
382.00
383.00
384.00
385.00
386.00
387.00
388.00
389.00
390.00
391.00
392.00
393.00
394.00
395.00
396.00
397.00
398.00
399.00
400.00
401.00
402.00
403.00
404.00
405.00
406.00
407.00
29
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
30
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
408.00
409.00
410.00
411.00
412.00
413.00
414.00
415.00
416.00
417.00
418.00
419.00
420.00
421.00
422.00
423.00
424.00
425.00
426.00
427.00
428.00
429.00
430.00
431.00
432.00
433.00
434.00
435.00
436.00
437.00
438.00
439.00
440.00
441.00
442.00
443.00
444.00
445.00
446.00
447.00
448.00
449.00
450.00
451.00
452.00
453.00
454.00
455.00
456.00
457.00
458.00
459.00
460.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
461.00
462.00
463.00
464.00
465.00
466.00
467.00
468.00
469.00
470.00
471.00
472.00
473.00
474.00
475.00
476.00
477.00
478.00
479.00
480.00
481.00
482.00
483.00
484.00
485.00
486.00
487.00
488.00
489.00
490.00
491.00
492.00
493.00
494.00
495.00
496.00
497.00
498.00
499.00
500.00
4.20 X 139.00
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
X
X
X
X
X
X
X
X
X
X
6.00
8.00
9.00
9.50
10.00
10.50
11.00
12.00
13.00
15.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
15.50
16.00
17.00
18.00
19.00
20.00
21.00
21.50
22.00
22.50
23.00
24.00
24.50
25.00
26.00
27.00
27.50
28.00
28.50
29.00
29.50
30.00
31.00
31.50
32.00
33.00
34.00
34.50
35.00
35.50
36.00
37.00
37.50
38.00
39.00
40.00
40.50
41.00
42.00
43.00
44.00
45.00
46.00
47.00
48.00
49.00
50.00
51.00
53.00
56.00
57.00
60.00
61.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
62.00
63.00
64.00
65.00
66.00
68.00
69.00
70.00
71.00
73.00
74.00
75.00
76.00
80.00
81.00
83.00
85.00
86.00
89.00
90.00
92.00
93.50
95.00
97.50
98.00
99.50
100.00
100.50
101.00
103.50
105.00
106.00
110.00
115.00
118.00
120.00
122.00
124.00
126.00
128.00
130.00
131.50
134.50
137.00
140.00
140.50
150.00
153.00
155.00
157.00
160.00
165.00
172.00
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
178.00
180.00
185.00
186.00
189.50
192.00
208.00
215.00
218.50
225.00
227.00
250.00
267.00
280.00
315.00
4.76 X
7.93
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4.00
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
14.00
15.00
16.00
17.00
18.00
19.00
20.00
21.00
22.00
23.00
24.00
25.00
26.00
27.00
28.00
29.00
30.00
31.00
32.00
33.00
34.00
35.00
36.00
37.00
38.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
39.00
40.00
41.00
42.00
43.00
44.00
45.00
46.00
47.00
48.00
49.00
50.00
51.00
52.00
53.00
54.00
55.00
56.00
57.00
58.00
59.00
60.00
61.00
62.00
63.00
64.00
65.00
66.00
67.00
68.00
69.00
70.00
71.00
72.00
73.00
74.00
75.00
76.00
77.00
78.00
79.00
80.00
81.00
82.00
83.00
84.00
85.00
86.00
87.00
88.00
89.00
90.00
91.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
92.00
93.00
94.00
95.00
96.00
97.00
98.00
99.00
100.00
101.00
102.00
103.00
104.00
105.00
106.00
107.00
108.00
109.00
110.00
111.00
112.00
113.00
114.00
115.00
116.00
117.00
118.00
119.00
120.00
121.00
122.00
123.00
124.00
125.00
126.00
127.00
128.00
129.00
130.00
131.00
132.00
133.00
134.00
135.00
136.00
137.00
138.00
139.00
140.00
141.00
142.00
143.00
144.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
145.00
146.00
147.00
148.00
149.00
150.00
151.00
152.00
153.00
154.00
155.00
156.00
157.00
158.00
159.00
160.00
161.00
162.00
163.00
164.00
165.00
166.00
167.00
168.00
169.00
170.00
171.00
172.00
173.00
174.00
175.00
176.00
177.00
178.00
179.00
180.00
181.00
182.00
183.00
184.00
185.00
186.00
187.00
188.00
189.00
190.00
191.00
192.00
193.00
194.00
195.00
196.00
197.00
31
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
32
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
198.00
199.00
200.00
201.00
202.00
203.00
204.00
205.00
206.00
207.00
208.00
209.00
210.00
211.00
212.00
213.00
214.00
215.00
216.00
217.00
218.00
219.00
220.00
221.00
222.00
223.00
224.00
225.00
226.00
227.00
228.00
229.00
230.00
231.00
232.00
233.00
234.00
235.00
236.00
237.00
238.00
239.00
240.00
241.00
242.00
243.00
244.00
245.00
246.00
247.00
248.00
249.00
250.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
251.00
252.00
253.00
254.00
255.00
256.00
257.00
258.00
259.00
260.00
261.00
262.00
263.00
264.00
265.00
266.00
267.00
268.00
269.00
270.00
271.00
272.00
273.00
274.00
275.00
276.00
277.00
278.00
279.00
280.00
281.00
282.00
283.00
284.00
285.00
286.00
287.00
288.00
289.00
290.00
291.00
292.00
293.00
294.00
295.00
296.00
297.00
298.00
299.00
300.00
301.00
302.00
303.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
304.00
305.00
306.00
307.00
308.00
309.00
310.00
311.00
312.00
313.00
314.00
315.00
316.00
317.00
318.00
319.00
320.00
321.00
322.00
323.00
324.00
325.00
326.00
327.00
328.00
329.00
330.00
331.00
332.00
333.00
334.00
335.00
336.00
337.00
338.00
339.00
340.00
341.00
342.00
343.00
344.00
345.00
346.00
347.00
348.00
349.00
350.00
351.00
352.00
353.00
354.00
355.00
356.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
357.00
358.00
359.00
360.00
361.00
362.00
363.00
364.00
365.00
366.00
367.00
368.00
369.00
370.00
371.00
372.00
373.00
374.00
375.00
376.00
377.00
378.00
379.00
380.00
381.00
382.00
383.00
384.00
385.00
386.00
387.00
388.00
389.00
390.00
391.00
392.00
393.00
394.00
395.00
396.00
397.00
398.00
399.00
400.00
415.00
460.00
470.00
5.30
5.30
5.30
5.30
5.30
X
X
X
X
X
40.00
41.20
41.40
42.50
43.70
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
5.30
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
45.00
46.20
47.50
48.70
50.00
51.50
53.00
54.40
54.50
56.00
58.00
60.00
61.50
63.00
65.00
67.00
69.00
71.00
73.00
75.00
77.50
80.00
82.50
85.00
87.50
90.00
92.50
95.00
97.50
100.00
103.00
106.00
109.00
112.00
115.00
118.00
122.00
125.00
128.00
132.00
136.00
140.00
145.00
150.00
155.00
160.00
165.00
170.00
175.00
180.00
185.00
190.00
195.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.30 X 200.00
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10.46
12.07
13.64
15.24
16.81
18.42
19.99
21.59
23.16
24.77
26.34
27.94
29.51
31.12
32.69
34.29
37.47
40.64
43.82
46.99
50.17
53.34
56.52
59.69
62.87
66.04
69.22
72.39
74.63
75.57
78.74
79.73
81.92
85.09
88.27
89.69
91.44
94.62
97.79
100.00
100.97
104.14
107.32
109.54
110.49
113.67
116.84
117.48
120.02
120.65
123.19
-309
-310
-311
-312
-313
-314
-315
-316
-317
-318
-319
-320
-321
-322
-323
-324
-325
-326
-327
-328
-329
-330
-331
-332
-333
-334
-335
-336
BS619
-337
-338
BS620
-339
-340
-341
BS621
-342
-343
-344
BS622
-345
-346
-347
BS623
-348
-349
-350
BS860
-351
BS861
-352
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
5.33
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
123.83
126.37
127.00
129.54
130.18
132.72
133.35
135.89
136.53
139.07
139.70
142.24
142.88
145.42
146.05
148.59
149.23
151.77
155.00
158.12
161.30
164.47
167.70
170.82
174.00
177.17
183.52
189.87
196.22
202.57
208.92
215.27
221.62
227.97
234.32
240.67
247.02
253.37
266.07
278.77
291.47
291.69
304.17
329.57
354.97
380.37
405.26
430.66
456.06
481.46
491.49
506.86
532.26
BS862
-353
BS863
-354
BS864
-355
BS865
-356
BS866
-357
BS867
-358
BS868
-359
BS869
-360
BS870
-361
BS644
-362
BS645
-363
BS646
-364
BS647
-365
-366
-367
-368
-369
-370
-371
-372
-373
-374
-375
-376
-377
-378
-379
-380
-381
-382
-383
-384
-385
-386
-387
-388
-389
-390
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.33
5.33
5.33
5.33
5.33
5.33
X
X
X
X
X
X
557.66
582.68
608.08
633.48
658.88
702.66
5.50
5.50
5.50
5.50
X 34.00
X 72.00
X 75.00
X 145.00
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
24.20
35.20
36.20
37.20
39.20
41.20
44.20
44.30
45.20
45.30
47.20
47.60
49.20
49.30
49.60
51.20
51.60
52.20
52.30
52.50
52.60
53.00
54.20
54.30
54.60
55.20
55.30
55.60
57.20
57.60
59.20
59.30
59.60
59.70
61.20
61.60
62.00
62.20
62.30
62.60
64.00
-391
-392
-393
-394
-395
P48A
P50A
P52
P53
P55
P56
P58
P60
P62
P63
33
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
34
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
64.20
64.30
64.60
66.60
67.20
67.60
69.00
69.20
69.30
69.60
70.20
70.60
71.20
72.20
72.30
74.00
74.20
74.30
74.60
77.20
79.00
79.20
79.30
79.60
81.20
82.20
84.00
84.10
84.20
84.30
84.60
87.20
89.00
89.10
89.20
89.30
89.60
92.20
94.00
94.10
94.20
94.30
94.60
97.20
99.00
99.10
99.20
99.30
99.60
101.60
104.00
104.10
104.20
P65
P67
P68
P70
P71
P75
P80
P85
P90
P95
P100
P102
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
104.30
104.60
109.00
109.10
109.20
109.30
109.60
111.60
114.00
114.20
114.30
114.60
119.00
119.20
119.30
119.50
119.60
124.00
124.30
124.60
125.30
129.20
129.30
129.60
131.60
132.20
133.20
134.20
134.30
134.60
139.20
139.30
139.60
144.20
144.30
144.60
149.20
149.30
149.60
154.30
159.30
164.20
164.30
168.00
169.30
174.20
174.30
179.30
184.30
189.20
189.30
194.20
194.30
P105
P110
P112
P115
P120
P125
P130
P132
P135
P140
P145
G150
P150
G155
G160
G165
G170
G175
G180
G185
G190
G195
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
199.20
199.30
204.20
209.20
209.30
219.30
229.30
234.30
239.30
249.30
259.30
269.30
279.30
289.20
289.30
299.30
319.30
329.30
339.30
349.30
359.30
379.30
399.30
419.30
439.30
449.20
459.30
479.30
499.30
519.30
529.30
594.00
594.30
725.00
5.80 X 11.70
5.80 X 218.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
6.00
7.00
9.00
10.00
11.00
12.00
13.00
14.00
15.00
16.00
18.00
19.00
19.50
20.00
21.00
G200
G210
G220
G230
G240
G250
G260
G270
G280
G290
G300
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
22.00
23.00
23.50
24.00
25.00
26.00
27.00
28.00
29.00
30.00
31.00
32.00
33.00
34.00
35.00
36.00
37.00
38.00
39.00
39.50
40.00
41.00
41.50
42.00
43.00
44.00
44.50
45.00
46.00
47.00
48.00
49.00
50.00
51.00
52.00
53.00
54.00
55.00
56.00
57.00
58.00
59.50
60.00
61.00
62.00
63.00
64.00
65.00
66.00
67.00
68.00
69.00
70.00
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
72.00
73.00
74.00
75.00
76.00
78.00
78.50
79.00
80.00
81.00
81.50
84.00
85.00
86.00
88.00
90.00
92.00
93.00
95.00
96.00
98.00
99.00
100.00
101.00
103.00
104.00
104.50
105.00
106.00
108.00
110.00
111.00
112.00
114.00
115.00
118.00
120.00
122.00
123.00
124.00
125.00
126.00
128.00
130.00
132.00
134.00
135.00
136.00
138.00
139.20
140.00
142.00
143.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
145.00
146.00
148.00
150.00
153.00
154.00
155.00
155.50
156.00
157.00
158.00
159.00
160.00
162.00
165.00
166.00
169.00
170.00
172.00
175.00
176.00
180.00
182.00
184.00
185.00
188.00
190.00
191.20
193.00
195.00
196.00
198.00
200.00
201.00
202.00
203.00
203.50
204.00
205.00
206.00
208.00
210.00
212.00
215.00
216.00
217.00
218.00
220.00
221.00
222.50
225.00
226.00
229.00
V225
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
230.00
235.00
236.00
237.00
237.50
238.00
240.00
242.00
244.00
247.00
249.00
250.00
258.00
259.00
260.00
262.00
265.00
266.00
270.00
272.00
278.00
280.00
284.00
285.00
288.00
290.00
294.00
295.00
300.00
301.00
305.00
310.00
311.00
315.00
320.00
321.50
324.00
325.00
330.00
333.00
335.00
338.00
340.00
345.00
347.00
348.00
350.00
355.00
358.00
360.00
365.00
368.00
370.00
V275
V325
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
375.00
376.00
380.00
385.00
386.00
388.00
389.00
390.00
392.00
394.00
395.00
398.00
400.00
415.00
422.00
425.50
429.00
446.00
448.00
450.00
453.00
470.00
478.00
480.00
483.00
486.00
489.00
500.00
504.00
505.00
508.00
510.00
516.00
530.00
540.00
544.00
549.00
552.00
555.00
560.00
569.00
575.00
579.00
V380
V430
6.20 X 422.20
6.35 X 610.00
6.50 X
6.50 X
50.00
57.00
6.90 X 422.20
35
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
36
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
34.29
37.46
40.64
43.81
46.99
50.16
53.34
56.51
59.69
62.86
66.04
69.21
72.39
75.56
78.74
81.91
85.09
88.26
91.44
94.61
97.79
100.96
104.14
107.31
110.49
113.67
114.70
116.84
120.02
123.19
124.60
126.37
129.54
132.72
134.50
135.89
139.07
142.24
145.42
148.59
151.77
155.60
158.12
159.50
161.90
164.47
166.70
168.30
170.82
174.60
177.17
181.00
183.52
-400
-401
-402
-403
-404
-405
-406
-407
-408
-409
-410
-411
-412
-413
-414
-415
-416
-417
-418
-419
-420
-421
-422
-423
-424
-425
BS624
-426
-427
-428
BS625
-429
-430
-431
BS626
-432
-433
-434
-435
-436
-437
BS872
-438
BS627
BS874
-439
BS628
BS876
-440
BS878
-441
BS880
-442
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
6.99
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
187.30
189.87
193.70
196.22
200.00
202.57
208.92
215.27
221.62
227.97
234.32
240.67
247.00
253.37
259.70
266.07
272.40
278.77
285.10
291.47
297.80
304.17
310.50
316.87
323.20
329.57
335.90
342.27
354.97
367.67
380.37
393.07
405.26
417.96
430.66
443.36
456.06
468.76
481.46
494.16
506.86
532.26
557.66
582.68
608.08
633.48
658.88
675.16
7.00 X
7.00 X
7.00 X
12.00
54.00
60.00
BS882
-443
BS884
-444
BS886
-445
BS674
-446
BS676
-447
BS678
-448
BS680
-449
BS682
-450
BS684
-451
BS686
-452
BS688
-453
BS648
-454
BS649
-455
BS650
-456
-457
-458
-459
-460
-461
-462
-463
-464
-465
-466
-467
-468
-469
-470
-471
-472
-473
-474
-475
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
70.00
75.00
82.00
90.00
95.00
105.00
110.00
192.00
206.00
212.00
218.00
224.00
230.00
236.00
243.00
250.00
250.37
258.00
265.00
272.00
280.00
290.00
300.00
307.00
315.00
325.00
335.00
345.00
355.00
360.00
365.00
375.00
387.00
400.00
412.00
425.00
437.00
450.00
457.20
462.00
475.00
487.00
490.00
494.67
500.00
515.00
530.00
545.00
545.47
560.00
580.00
596.27
600.00
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
7.00
X
X
X
X
X
X
X
X
X
X
X
615.00
630.00
647.07
650.00
670.00
699.00
724.00
730.50
745.00
760.00
880.00
7.50 X
75.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
25.00
42.00
57.00
60.00
97.00
100.00
108.00
114.00
150.00
160.00
180.00
195.00
216.00
226.00
230.00
240.00
242.00
260.00
265.00
280.00
310.00
326.00
330.00
350.00
360.00
400.00
425.00
450.00
460.00
490.00
500.00
520.00
630.00
638.00
800.00
8.30 X 125.00
8.40 X 144.10
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Metric O-Rings (Continued)
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
149.10
149.50
154.10
154.50
159.10
159.50
164.10
164.50
169.10
169.50
174.10
174.50
179.10
179.50
184.10
184.50
189.10
189.50
194.10
194.50
199.10
199.50
204.10
204.50
208.50
209.10
209.50
214.50
219.10
219.50
224.50
229.10
229.50
234.10
234.50
239.10
239.50
244.50
249.10
249.50
254.50
259.50
264.50
269.50
274.50
279.50
284.50
289.50
294.50
299.50
304.00
314.50
319.50
P150A
P155
P160
P165
P170
P175
P180
P185
P190
CROSS
INSIDE
SIZE
SECTION DIAMETER CROSS
(mm)
(mm)
REF.
8.40
8.40
8.40
8.40
8.40
8.40
8.40
8.40
X
X
X
X
X
X
X
X
334.50
339.50
354.50
359.50
374.50
375.00
384.50
399.50
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
9.00
X
X
X
X
X
X
X
X
X
X
75.00
84.00
205.00
316.00
335.00
360.00
402.00
451.00
480.00
545.00
P335
P340
P355
P360
P375
P385
P400
P205
P209
P210
P215
P220
P225
P230
P235
P240
P245
P250
P255
P260
P265
P270
P275
P280
P285
P290
P295
P300
P315
P320
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
10.00
X 35.00
X 38.00
X 92.00
X 105.00
X 120.00
X 140.00
X 160.00
X 195.00
X 205.00
X 228.00
X 264.00
X 270.00
X 280.00
X 292.00
X 300.00
X 315.00
X 325.00
X 330.00
X 340.00
X 360.00
X 380.00
X 450.00
X 475.00
X 524.50
X 579.00
X 633.50
X 683.00
X 700.00
X 732.50
X 782.00
X 836.50
X 1044.00
and
Cure Dates
are provided upon request
on your
P195
P200
Batch Numbers
O-Ring Orders.
V480
V530
V585
V640
V690
V740
V790
V845
V1055
37
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Japanese Industrial Standards
Dimensional Data
P Series
JIS
No.
Cross
Inside
Section Diameter
(mm)
(mm)
P3
P4
P5
P6
P7
1.90
1.90
1.90
1.90
1.90
X
X
X
X
X
2.80
3.80
4.80
5.80
6.80
P8
P9
P10
P10A
P11
1.90
1.90
1.90
2.40
2.40
X
X
X
X
X
7.80
8.80
9.80
9.80
10.80
P11.2
P12
P12.5
P14
P15
2.40
2.40
2.40
2.40
2.40
X
X
X
X
X
11.00
11.80
12.30
13.80
14.80
P16
P18
P20
P21
P22
2.40
2.40
2.40
2.40
2.40
X
X
X
X
X
15.80
17.80
19.80
20.80
21.80
P22A
P22.4
P24
P25
P25.5
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
21.70
22.10
23.70
24.70
25.20
P26
P28
P29
P29.5
P30
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
25.70
27.70
28.70
29.20
29.70
P31
P31.5
P32
P34
P35
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
30.70
31.20
31.70
33.70
34.70
P35.5
P36
P38
P39
P40
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
35.20
35.70
37.70
38.70
39.70
P41
P42
P44
P45
P46
3.50
3.50
3.50
3.50
3.50
X
X
X
X
X
40.70
41.70
43.70
44.70
45.70
P48
3.50
X 47.70
38
JIS
No.
G Series
Cross
Inside
Section Diameter
(mm)
(mm)
JIS
No.
Cross
Inside
Section Diameter
(mm)
(mm)
P49
P50
P48A
P50A
3.50
3.50
5.70
5.70
X
X
X
X
48.70
49.70
47.60
49.60
P200
P205
P209
P210
8.40
8.40
8.40
8.40
X
X
X
X
199.50
204.50
208.50
209.50
P52
P53
P55
P56
P58
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
51.60
52.60
54.60
55.60
57.60
P215
P220
P225
P230
P235
8.40
8.40
8.40
8.40
8.40
X
X
X
X
X
214.50
219.50
224.50
229.50
234.50
P60
P62
P63
P65
P67
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
59.60
61.60
62.60
64.60
66.60
P240
P245
P250
P255
P260
8.40
8.40
8.40
8.40
8.40
X
X
X
X
X
239.50
244.50
249.50
254.50
259.50
P70
P71
P75
P80
P85
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
69.60
70.60
74.60
79.60
84.60
P265
P270
P275
P280
P285
8.40
8.40
8.40
8.40
8.40
X
X
X
X
X
264.50
269.50
274.50
279.50
284.50
P90
P95
P100
P102
P105
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
89.60
94.60
99.60
101.60
104.60
P290
P295
P300
P315
P320
8.40
8.40
8.40
8.40
8.40
X
X
X
X
X
289.50
294.50
299.50
314.50
319.50
P110
P112
P115
P120
P125
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
109.60
111.60
114.60
119.60
124.60
P335
P340
P355
P360
P375
8.40
8.40
8.40
8.40
8.40
X
X
X
X
X
334.50
339.50
354.50
359.50
374.50
P130
P132
P135
P140
P145
5.70
5.70
5.70
5.70
5.70
X
X
X
X
X
129.60
131.60
134.60
139.60
144.60
P385
P400
8.40
8.40
X 384.50
X 399.50
P150
P150A
P155
P160
P165
5.70
8.40
8.40
8.40
8.40
X
X
X
X
X
149.60
149.50
154.50
159.50
164.50
P170
P175
P180
P185
P190
8.40
8.40
8.40
8.40
8.40
X
X
X
X
X
169.50
174.50
179.50
184.50
189.50
P195
8.40
X 194.50
JIS
No.
Cross
Inside
Section Diameter
(mm)
(mm)
G25
G30
G35
G40
G45
3.10
3.10
3.10
3.10
3.10
24.40
29.40
34.40
39.40
44.40
G50
G55
G60
G65
G70
3.10
3.10
3.10
3.10
3.10
49.40
54.40
59.40
64.40
69.40
G75
G80
G85
G90
G95
3.10
3.10
3.10
3.10
3.10
74.40
79.40
84.40
89.40
94.40
G100
G105
G110
G115
G120
3.10
3.10
3.10
3.10
3.10
99.40
104.40
109.40
114.40
119.40
G125
G130
G135
G140
G145
3.10
3.10
3.10
3.10
3.10
124.40
129.40
134.40
139.40
144.40
G150
G155
G160
G165
G170
5.70
5.70
5.70
5.70
5.70
149.30
154.30
159.30
164.30
169.30
G175
G180
G185
G190
G195
5.70
5.70
5.70
5.70
5.70
174.30
179.30
184.30
189.30
194.30
G200
G210
G220
G230
G240
5.70
5.70
5.70
5.70
5.70
199.30
209.30
219.30
229.30
239.30
G250
G260
G270
G280
G290
5.70
5.70
5.70
5.70
5.70
249.30
259.30
269.30
279.30
289.30
G300
5.70
299.30
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Japanese Industrial Standards
Dimensional Data (Continued)
S Series
JIS
No.
Cross
Inside
Section Diameter
(mm)
(mm)
JIS
No.
V Series
Cross
Inside
Section Diameter
(mm)
(mm)
JIS
No.
Cross
Inside
Section Diameter
(mm)
(mm)
S3
S4
S5
S6
S7
1.50
1.50
1.50
1.50
1.50
X
X
X
X
X
2.50
3.50
4.50
5.50
6.50
S45
S46
S48
S50
S53
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
44.50
45.50
47.50
49.50
52.50
V15
V24
V34
V40
V55
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
14.50
23.50
33.50
39.50
54.50
S8
S9
S10
S11.2
S12
1.50
1.50
1.50
1.50
1.50
X
X
X
X
X
7.50
8.50
9.50
10.70
11.50
S55
S56
S60
S63
S65
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
54.50
55.50
59.50
62.50
64.50
V70
V85
V100
V120
V150
4.00
4.00
4.00
4.00
4.00
X
X
X
X
X
69.00
84.00
99.00
119.00
148.50
S12.5
S14
S15
S16
S18
1.50
1.50
1.50
1.50
1.50
X
X
X
X
X
12.00
13.50
14.50
15.50
17.50
S67
S70
S71
S75
S80
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
66.50
69.50
70.50
74.50
79.50
V175
V225
V275
V325
V380
4.00
6.00
6.00
6.00
6.00
X
X
X
X
X
173.00
222.50
272.00
321.50
376.00
S20
S22
S22.4
S24
S25
1.50
1.50
2.00
2.00
2.00
X
X
X
X
X
19.50
21.50
21.90
23.50
24.50
S85
S90
S95
S100
S105
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
84.50
89.50
94.50
99.50
104.50
V430
V480
V530
V585
V640
6.00
10.00
10.00
10.00
10.00
X
X
X
X
X
425.50
475.00
524.50
579.00
633.50
S26
S28
S29
S30
S31.5
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
25.50
27.50
28.50
29.50
31.00
S110
S112
S115
S120
S125
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
109.50
111.50
114.50
119.50
124.50
V690
V740
V790
V845
V950
10.00
10.00
10.00
10.00
10.00
X
X
X
X
X
683.00
732.50
782.00
836.50
940.50
S32
S34
S35
S35.5
S36
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
31.50
33.50
34.50
35.00
35.50
S130
S132
S135
S140
S145
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
129.50
131.50
134.50
139.50
144.50
V1055
10.00 X
S38
S39
S40
S42
S43
S44
2.00
2.00
2.00
2.00
2.00
2.00
X
X
X
X
X
X
37.50
38.50
39.50
41.50
42.50
43.50
S150
2.00 X
149.50
1044.00
39
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Q-Ring Sizes and Dimensions
AS568
SERIES
Q-DASH
NO.
NOMINAL
SIZE
I.D.
O.D.
C/S
ACTUAL
AS568
SERIES
I.D.
Q-DASH
NO.
-004 TO -050 Cross Section Diameters — .070 ± .003 inches
NOMINAL
SIZE
I.D.
ACTUAL
O.D.
C/S
I.D.
-004 TO -050 Cross Section Diameters — .070 ± .003 inches
-041
-042
-043
-044
-045
3
3-1/4
3-1/2
3-3/4
4
X
X
X
X
X
3-1/8
3-3/8
3-5/8
3-7/8
4-1/8
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
2.989
3.239
3.489
3.739
3.989
-046
-047
-048
-049
-050
4-1/4
4-1/2
4-3/4
5
5-1/4
X
X
X
X
X
4-3/8
4-5/8
4-7/8
5-1/8
5-3/8
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
4.239
4.489
4.739
4.989
5.239
*-001
*-002
*-003
-004
-005
1/32
3/64
1/16
5/64
3/32
X
X
X
X
X
3/32
9/64
3/16
13/64
7/32
X
X
X
X
X
1/32
1/32
1/16
1/16
1/16
.029
.042
.056
.070
.101
-006
-007
-008
-009
-010
1/8
5/32
3/16
7/32
1/4
X
X
X
X
X
1/4
9/32
5/16
11/32
3/8
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
.114
.145
.176
.208
.239
-011
-012
-013
-014
-015
5/16
3/8
7/16
1/2
9/16
X
X
X
X
X
7/16
1/2
9/16
5/8
11/16
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
.301
.364
.426
.489
.551
-102
-103
-104
-105
1/16
3/32
1/8
5/32
X
X
X
X
1/4
9/32
5/16
11/32
X
X
X
X
3/32
3/32
3/32
3/32
.049
.081
.112
.143
-016
-017
-018
-019
-020
5/8
11/16
3/4
13/16
7/8
X
X
X
X
X
3/4
13/16
7/8
15/16
1
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
.614
.676
.739
.801
.864
-106
-107
-108
-109
-110
3/16
7/32
1/4
5/16
3/8
X
X
X
X
X
3/8
13/32
7/16
1/2
9/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
.174
.206
.237
.299
.362
-021
-022
-023
-024
-025
15/16
1
1-1/16
1-1/8
1-3/16
X
X
X
X
X
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
.926
.989
1.051
1.114
1.176
-111
-112
-113
-114
-115
7/16
1/2
9/16
5/8
11/16
X
X
X
X
X
5/8
11/16
3/4
13/16
7/8
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
.424
.487
.549
.612
.674
-026
-027
-028
-029
-030
1-1/4
1-5/16
1-3/8
1-1/2
1-5/8
X
X
X
X
X
1-3/8
1-7/16
1-1/2
1-5/8
1-3/4
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
1.239
1.301
1.364
1.489
1.614
-116
-117
-118
-119
-120
3/4
13/16
7/8
15/16
1
X
X
X
X
X
15/16
1
1-1/16
1-1/8
1-3/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
.737
.799
.862
.924
.987
-031
-032
-033
-034
-035
1-3/4
1-7/8
2
2-1/8
2-1/4
X
X
X
X
X
1-7/8
2
2-1/8
2-1/4
2-3/8
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
1.739
1.864
1.989
2.114
2.239
-121
-122
-123
-124
-125
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
X
X
X
X
X
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
1.049
1.112
1.174
1.237
1.299
-036
-037
-038
-039
-040
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
X
X
X
X
X
2-1/2
2-5/8
2-3/4
2-7/8
3
X
X
X
X
X
1/16
1/16
1/16
1/16
1/16
2.364
2.489
2.614
2.739
2.864
-126
-127
-128
-129
-130
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
X
X
X
X
X
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
1.362
1.424
1.487
1.549
1.612
-131
-132
-133
-134
-135
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
X
X
X
X
X
1-7/8
1-15/16
2
2-1/16
2-1/8
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
1.674
1.737
1.799
1.862
1.925
-102 to -178 Cross Section Diameters - .103 ± .003 inches
* Cross Section Diameter:
40
- 001 - .040 + .003 in./1.02 + .08 mm.
- 002 - .050 + .003 in./1.27 + .08 mm.
- 003 - .060 + .003 in./1.52 + .08 mm.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Q-Ring Sizes and Dimensions (Continued)
AS568
SERIES
Q-DASH
NO.
NOMINAL
SIZE
I.D.
O.D.
C/S
ACTUAL
AS568
SERIES
I.D.
Q-DASH
NO.
-102 TO -178 Cross Section Diameters — .103 + .003 inches
NOMINAL
SIZE
I.D.
ACTUAL
O.D.
C/S
I.D.
-201 TO -284 Cross Section Diameters — .139 ± .004 inches
-136
-137
-138
-139
-140
2
2-1/16
2-1/8
2-3/16
2-1/4
X
X
X
X
X
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
1.987
2.050
2.112
2.175
2.237
-211
-212
-213
-214
-215
13/16
7/8
15/16
1
1-1/16
X
X
X
X
X
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
.796
.859
.921
.984
1.046
-141
-142
-143
-144
-145
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
X
X
X
X
X
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
2.300
2.362
2.425
2.487
2.550
-216
-217
-218
-219
-220
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
X
X
X
X
X
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
1.109
1.171
1.234
1.296
1.359
-146
-147
-148
-149
-150
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
X
X
X
X
X
2-13/16
2-7/8
2-15/16
3
3-1/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
2.612
2.675
2.737
2.800
2.862
-221
-222
-223
-224
-225
1-7/16
1-1/2
1-5/8
1-3/4
1-7/8
X
X
X
X
X
1-11/16
1-3/4
1-7/8
2
2-1/8
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
1.421
1.609
1.609
1.734
1.859
-151
-152
-153
-154
-155
3
3-1/4
3-1/2
3-3/4
4
X
X
X
X
X
3-3/16
3-7/16
3-11/16
3-15/16
4-3/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
2.987
3.237
3.487
3.737
3.987
-226
-227
-228
-229
-230
2
2-1/8
2-1/4
2-3/8
2-1/2
X
X
X
X
X
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
1.984
2.109
2.234
2.359
2.484
-156
-157
-158
-159
-160
4-1/4
4-1/2
4-3/4
5
5-1/4
X
X
X
X
X
4-7/16
4-11/16
4-15/16
5-3/16
5-7/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
4.237
4.487
4.737
4.987
5.237
-231
-232
-233
-234
-235
2-5/8
2-3/4
2-7/8
3
3-1/8
X
X
X
X
X
2-7/8
3
3-1/8
3-1/4
3-3/8
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
2.609
2.734
2.859
2.984
3.109
-161
-162
-163
-164
-165
5-1/2
5-3/4
6
6-1/4
6-1/2
X
X
X
X
X
5-11/16
5-15/16
6-3/16
6-7/16
6-11/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
5.487
5.737
5.987
6.237
6.487
-236
-237
-238
-239
-240
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
X
X
X
X
X
3-1/2
3-5/8
3-3/4
3-7/8
4
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
3.234
3.359
3.484
3.609
3.734
-166
-167
-168
-169
-170
6-3/4
7
7-1/4
7-1/2
7-3/4
X
X
X
X
X
6-15/16
7-3/16
7-7/16
7-11/16
7-15/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
6.737
6.987
7.237
7.487
7.737
-241
-242
-243
-244
-245
3-7/8
4
4-1/8
4-1/4
4-3/8
X
X
X
X
X
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
3.859
3.984
4.109
4.234
4.359
-171
-172
-173
-174
-175
8
8-1/4
8-1/2
8-3/4
9
X
X
X
X
X
8-3/16
8-7/16
8-11/16
8-15/16
9-3/16
X
X
X
X
X
3/32
3/32
3/32
3/32
3/32
7.987
8.237
8.487
8.737
8.987
-246
-247
-248
-249
-250
4-1/2
4-5/8
4-3/4
4-7/8
5
X
X
X
X
X
4-3/4
4-7/8
5
5-1/8
5-1/4
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
4.484
4.609
4.734
4.859
4.984
-176
-177
-178
9-1/4
9-1/2
9-3/4
X 9-7/16
X 9-11/16
X 9-15/16
X 3/32
X 3/32
X 3/32
9.237
9.487
9.737
-251
-252
-253
-254
-255
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
X
X
X
X
X
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
5.109
5.234
5.359
5.484
5.609
-201 to -284 Cross Section Diameter - .139 + .004 inches
-201
-202
-203
-204
-205
3/16
1/4
5/16
3/8
7/16
X
X
X
X
X
7/16
1/2
9/16
5/8
11/16
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
.171
.234
.296
.359
.421
-256
-257
-258
-259
-260
5-3/4
5-7/8
6
6-1/4
6-1/2
X
X
X
X
X
6
6-1/8
6-1/4
6-1/2
6-3/4
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
5.734
5.859
5.984
6.234
6.484
-206
-207
-208
-209
-210
1/2
9/16
5/8
11/16
3/4
X
X
X
X
X
3/4
1-13/16
7/8
15/16
1
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
.484
.546
.609
.671
.734
-261
-262
-263
-264
-265
6-3/4
7
7-1/4
7-1/2
7-3/4
X
X
X
X
X
7
7-1/4
7-1/2
7-3/4
8
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
6.734
6.984
7.234
7.484
7.734
41
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Q-Ring Sizes and Dimensions (Continued)
AS568
SERIES
Q-DASH
NO.
NOMINAL
SIZE
I.D.
O.D.
C/S
ACTUAL
AS568
SERIES
I.D.
Q-DASH
NO.
-201 TO -284 Cross Section Diameters — .139 ± .004 inches
NOMINAL
SIZE
I.D.
ACTUAL
O.D.
C/S
I.D.
-309 TO -395 Cross Section Diameters — .210 ± .005inches
-266
-267
-268
-269
-270
8
8-1/4
8-1/2
8-3/4
9
X
X
X
X
X
8-1/4
8-1/2
8-3/4
9
9-1/4
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
7.984
8.234
8.484
8.734
8.984
-341
-342
-343
-344
-345
3-1/2
3-5/8
3-3/4
3-7/8
4
X
X
X
X
X
3-7/8
4
4-1/8
4-1/16
4-3/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
3.475
3.600
3.725
3.850
3.975
-271
-272
-273
-274
-275
9-1/4
9-1/2
9-3/4
10
10-1/2
X
X
X
X
X
9-1/2
9-3/4
10
10-1/4
10-3/4
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
9.234
9.484
9.734
9.984
10.484
-346
-347
-348
-349
-350
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
X
X
X
X
X
4-1/2
4-5/8
4-3/4
4-7/8
5
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
4.100
4.225
4.350
4.475
4.600
-276
-277
-278
-279
-280
11
11-1/2
12
13
14
X
X
X
X
X
11-1/4
11-3/4
12-1/4
13-1/4
14-1/4
X
X
X
X
X
1/8
1/8
1/8
1/8
1/8
10.984
11.484
11.984
12.984
13.984
-351
-352
-353
-354
-355
4-3/4
4-7/8
5
5-1/8
5-1/4
X
X
X
X
X
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
4.725
4.850
4.975
5.100
5.225
-281
-282
-283
-284
15
16
17
18
X
X
X
X
15-1/4
16-1/4
17-1/4
18-1/4
X
X
X
X
1/8
1/8
1/8
1/8
14.984
15.955
16.955
17.955
-356
-357
-358
-359
-360
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
X
X
X
X
X
5-3/4
5-7/8
6
6-1/8
6-1/4
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
5.350
5.475
5.600
5.725
5.850
-361
-362
-363
-364
-365
6
6-1/4
6-1/2
6-3/4
7
X
X
X
X
X
6-3/8
6-5/8
6-7/8
7-1/8
7-3/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
5.975
6.225
6.475
6.725
6.975
-366
-367
-368
-369
-370
7-1/4
7-1/2
7-3/4
8
8-1/4
X
X
X
X
X
7-5/8
7-7/8
8-1/8
8-3/8
8-5/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
7.225
7.475
7.725
7.975
8.225
-371
-372
-373
-374
-375
8-1/2
8-3/4
9
9-1/4
9-1/2
X
X
X
X
X
8-7/8
9-1/8
9-3/8
9-5/8
9-7/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
8.475
8.725
8.975
9.225
9.475
-376
-377
-378
-379
-380
9-3/4
10
10-1/2
11
11-1/2
X
X
X
X
X
10-1/8
10-3/8
10-7/8
11-3/8
11-7/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
9.725
9.975
10.475
10.975
11.475
-381
-382
-383
-384
-385
12
13
14
15
16
X
X
X
X
X
12-3/8
13-3/8
14-3/8
15-3/8
16-3/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
11.975
12.975
13.975
14.975
15.955
-386
-387
-388
-389
-390
17
18
19
20
21
X
X
X
X
X
17-3/8
18-3/8
19-3/8
20-3/8
21-3/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
16.955
17.955
18.952
19.952
20.952
-391
-392
-393
-394
-395
22
23
24
25
26
X
X
X
X
X
22-3/8
23-3/8
24-3/8
25-3/8
26-3/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
21.952
22.940
23.940
24.940
25.940
-309 to -395 Cross Section Diameter -.210 ± .005 inches
-309
-310
7/16
1/2
X 13/16
X 7/8
X 3/16
X 3/16
.412
.475
-311
-312
-313
-314
-315
9/16
5/8
11/16
3/4
13/16
X
X
X
X
X
15/16
1
1-1/16
1-1/8
1-3/16
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
.537
.600
.662
.725
.787
-316
-317
-318
-319
-320
7/8
15/16
1
1-1/16
1-1/8
X
X
X
X
X
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
.850
.850
.975
1.037
1.100
-321
-322
-323
-324
-325
1-3/16
1-1/4
1-5/16
1-3/8
1-1/2
X
X
X
X
X
1-9/16
1-5/8
1-11/16
1-3/4
1-7/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
1.162
1.225
1.287
1.350
1.475
-326
-327
-328
-329
-330
1-5/8
1-3/4
1-7/8
2
2-1/8
X
X
X
X
X
2
2-1/8
2-1/4
2-3/8
2-1/2
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
1.600
1.725
1.850
1.975
2.100
-331
-332
-333
-334
-335
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
X
X
X
X
X
2-5/8
2-3/4
2-7/8
3
3-1/8
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
2.225
2.350
2.475
2.600
2.725
-336
-337
-338
-339
-340
2-7/8
3
3-1/8
3-1/4
3-3/8
X
X
X
X
X
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
X
X
X
X
X
3/16
3/16
3/16
3/16
3/16
2.850
2.975
3.100
3.225
3.350
42
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Q-Ring Sizes and Dimensions (Continued)
AS568
SERIES
Q-DASH
NO.
NOMINAL
SIZE
I.D.
O.D.
C/S
ACTUAL
AS568
SERIES
I.D.
Q-DASH
NO.
-425 TO -475 Cross Section Diameters — .275 ± .006inches
NOMINAL
SIZE
I.D.
ACTUAL
O.D.
C/S
I.D.
-425 TO -475 Cross Section Diameters — .275 ± .006inches
-425
-426
-427
-428
-429
4-1/2
4-5/8
4-3/4
4-7/8
5
X
X
X
X
X
5
5-1/8
5-1/4
5-3/8
5-1/2
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
4.475
4.600
4.725
4.850
4.975
-450
-451
-452
-453
-454
10-1/2
11
11-1/2
12
12-1/2
X
X
X
X
X
11
11-1/2
12
12-1/2
13
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
10.475
10.975
11.475
11.975
12.475
-430
-431
-432
-433
-434
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
X
X
X
X
X
5-5/8
5-3/4
5-7/8
6
6-1/8
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
5.100
5.225
5.350
5.475
5.600
-455
-456
-457
-458
-459
13
13-1/2
14
14-1/2
15
X 13-1/2
X 14
X 14-1/2
X 15
X 15-1/2
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
12.975
13.475
13.975
14.475
14.975
-435
-436
-437
-438
-439
5-3/4
5-7/8
6
6-1/4
6-1/2
X
X
X
X
X
6-1/4
6-3/8
6-1/2
6-3/4
7
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
5.725
5.850
5.975
6.225
6.475
-460
-461
-462
-463
-464
15-1/2
16
16-1/2
17
17-1/2
X
X
X
X
X
16
16-1/2
17
17-1/2
18
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
15.475
15.955
16.455
16.955
17.455
-440
-441
-442
-443
-444
6-3/4
7
7-1/4
7-1/2
7-3/4
X
X
X
X
X
7-1/4
7-1/2
7-3/4
8
8-1/4
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
6.725
6.975
7.225
7.475
7.725
-465
-466
-467
-468
-469
18
18-1/2
19
19-1/2
20
X
X
X
X
X
18-1/2
19
19-1/2
20
20-1/2
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
17.955
18.455
18.955
19.455
19.955
-445
-446
-447
-448
-449
8
8-1/2
9
9-1/2
10
X
X
X
X
X
8-1/2
9
9-1/2
10
10-1/2
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
7.975
8.475
8.975
9.475
9.975
-470
-471
-472
-473
-474
-475
21
22
23
24
25
26
X
X
X
X
X
X
21-1/2
22-1/2
23-1/2
24-1/2
25-1/2
26-1/2
X
X
X
X
X
X
1/4
1/4
1/4
1/4
1/4
1/4
20.955
21.955
22.940
23.940
24.940
25.940
Do You Want to
Place Orders On-Line?
Go to www.callapg.com to find out how!
43
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Contoured Back-Up Rings - Series 8
DASH NOS.
– 004
– 102
– 201
– 309
– 425
Dash No.
I.D.
Tol.
±
W
Tol.
±
8-004
8-005
.096
.127
.005
.005
.053
.053
.003
.003
8-006
8-007
8-008
8-009
8-010
.140
.171
.202
.234
.265
.005
.005
.005
.005
.005
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
8-011
8-012
8-013
8-014
8-015
.327
.390
.455
.518
.580
.005
.005
.005
.005
.005
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
8-016
8-017
8-018
8-019
8-020
.643
.705
.768
.830
.893
.009
.009
.009
.009
.009
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
8-021
8-022
8-023
8-024
8-025
.955
1.018
1.080
1.143
1.205
.009
.010
.010
.010
.011
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
8-026
8-027
8-028
8-029
8-030
1.268
1.330
1.393
1.518
1.643
.011
.011
.013
.013
.013
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
8-031
8-032
8-033
8-034
8-035
1.768
1.893
2.018
2.143
2.268
.015
.015
.018
.018
.018
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
8-036
8-037
8-038
8-039
8-040
2.393
2.519
2.643
2.768
2.893
.018
.018
.018
.020
.020
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
8-041
8-042
8-043
8-044
8-045
3.018
3.268
3.518
3.768
4.018
.024
.024
.024
.027
.027
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
8-046
8-047
8-048
8-049
8-050
4.268
4.518
4.768
5.018
5.268
.030
.030
.030
.037
.037
.053
.053
.053
.053
.053
.003
.003
.003
.003
.003
44
Dash No.
THRU
THRU
THRU
THRU
THRU
I.D.
T (Ref.)
– 050
– 178
– 284
– 395
– 475
A
.049
.053
.050
.076
.117
Tol.
±
.045
.045
.040
.060
.096
W
±
±
±
±
±
.003
.003
.003
.004
.005
Tol.
±
8-102
8-103
8-104
8-105
8-106
.077
.109
.140
.171
.202
.005
.005
.005
.005
.005
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-107
8-108
8-109
8-110
8-111
.234
.265
.327
.390
.452
.005
.005
.005
.005
.005
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-112
8-113
8-114
8-115
8-116
.515
.577
.640
.702
.765
.007
.007
.009
.009
.009
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-117
8-118
8-119
8-120
8-121
.831
.893
.956
1.018
1.081
.010
.010
.010
.010
.010
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-122
8-123
8-124
8-125
8-126
1.143
1.206
1.268
1.331
1.393
.010
.012
.012
.012
.012
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-127
8-128
8-129
8-130
8-131
1.456
1.518
1.581
1.643
1.706
.012
.012
.015
.015
.015
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-132
8-133
8-134
8-135
8-136
1.768
1.831
1.893
1.956
2.018
.015
.015
.015
.017
.017
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-137
8-138
8-139
8-140
8-141
2.081
2.143
2.206
2.268
2.331
.017
.017
.017
.017
.020
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-142
8-143
8-144
8-145
8-146
2.393
2.456
2.528
2.518
2.643
.020
.020
.020
.020
.020
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-147
8-148
8-149
8-150
8-151
2.706
2.768
2.831
2.893
3.018
.022
.022
.022
.022
.024
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Contoured Back-Up Rings - Series 8 (Continued)
I.D.
Tol.
±
W
8-152
8-153
8-154
8-155
8-156
3.268
3.518
3.768
4.018
4.268
.024
.024
.028
.028
.030
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-157
8-158
8-159
8-160
8-161
4.518
4.768
5.018
5.268
5.518
.030
.030
.035
.035
.035
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-162
8-163
8-164
8-165
8-166
5.768
6.018
6.268
6.518
6.768
.035
.035
.040
.040
.040
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-167
8-168
8-169
8-170
8-171
7.018
7.268
7.518
7.768
8.018
.040
.045
.045
.045
.045
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-172
8-173
8-174
8-175
8-176
8.268
8.518
8.768
9.018
9.268
.050
.050
.050
.050
.050
.086
.086
.086
.086
.086
.003
.003
.003
.003
.003
8-177
8-178
9.518
9.768
.055
.055
.086
.086
.003
.003
8-201
8-202
8-203
8-204
8-205
.202
.265
.327
.390
.455
.005
.005
.005
.005
.005
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-206
8-207
8-208
8-209
8-210
.518
.580
.643
.705
.765
.007
.007
.009
.009
.010
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-211
8-212
8-213
8-214
8-215
.828
.891
.953
1.016
1.078
.010
.010
.010
.010
.010
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-216
8-217
8-218
8-219
8-220
1.141
1.203
1.266
1.334
1.397
.012
.012
.012
.012
.012
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-221
8-222
8-223
8-224
8-225
1.459
1.522
1.647
1.772
1.897
.012
.015
.015
.015
.018
.118
.118
.118
.118
.118
8-226
8-227
8-228
8-229
8-230
2.022
2.147
2.272
2.397
2.522
.018
.018
.020
.020
.020
8-231
8-232
8-233
8-234
8-235
2.631
2.756
2.881
3.006
3.131
.020
.024
.024
.024
.024
Dash No.
Tol.
±
I.D.
Tol.
±
W
8-236
8-237
8-238
8-239
8-240
3.256
3.381
3.506
3.631
3.756
.024
.024
.024
.028
.028
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-241
8-242
8-243
8-244
8-245
3.881
4.006
4.131
4.256
4.381
.028
.028
.028
.030
.030
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-246
8-247
8-248
8-249
8-250
4.506
4.631
4.768
4.893
5.018
.030
.030
.030
.035
.035
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-251
8-252
8-253
8-254
8-255
5.143
5.268
5.393
5.518
5.643
.035
.035
.035
.035
.035
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-256
8-257
8-258
8-259
8-260
5.768
5.893
6.018
6.268
6.518
.035
.035
.035
.040
.040
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-261
8-262
8-263
8-264
8-265
6.768
7.018
7.268
7.518
7.768
.040
.040
.045
.045
.045
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-266
8-267
8-268
8-269
8-270
8.018
8.268
8.518
8.768
9.018
.045
.050
.050
.050
.050
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-271
8-272
8-273
8-274
8-275
9.268
9.518
9.768
10.018
10.518
.055
.055
.055
.055
.055
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-276
8-277
8-278
8-279
8-280
11.018
11.518
12.018
13.018
14.018
.065
.065
.065
.065
.065
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-281
8-282
8-283
8-284
15.018
15.989
16.989
17.989
.065
.075
.080
.085
.118
.118
.118
.118
.004
.004
.004
.004
.004
.004
.004
.004
.004
8-309
8-310
8-311
8-312
8-313
.450
.513
.575
.638
.700
.005
.007
.007
.009
.009
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-314
8-315
8-316
8-317
8-318
.763
.825
.888
.950
1.013
.010
.010
.010
.010
.010
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
.118
.118
.118
.118
.118
.004
.004
.004
.004
.004
8-319
8-320
8-321
8-322
8-323
1.075
1.138
1.200
1.263
1.316
.010
.012
.012
.012
.012
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
Dash No.
Tol.
±
45
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Contoured Back-Up Rings - Series 8 (Continued)
I.D.
Tol.
±
W
8-324
8-325
8-326
8-327
8-328
1.388
1.513
1.638
1.763
1.888
.012
.015
.015
.015
.015
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-329
8-330
8-331
8-332
8-333
2.013
2.138
2.268
2.393
2.518
.018
.018
.018
.018
.020
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-334
8-335
8-336
8-337
8-338
2.643
2.768
2.893
3.018
3.143
.020
.020
.020
.024
.024
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-339
8-340
8-341
8-342
8-343
3.273
3.398
3.523
3.648
3.773
.024
.024
.024
.028
.028
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-344
8-345
8-346
8-347
8-348
3.898
4.028
4.153
4.278
4.403
.028
.028
.028
.030
.030
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-349
8-350
8-351
8-352
8-353
4.528
4.653
4.778
4.903
5.028
.030
.030
.030
.030
.037
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-354
8-355
8-356
8-357
8-358
5.153
5.278
5.403
5.528
5.653
.037
.037
.037
.037
.037
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-359
8-360
8-361
8-362
8-363
5.778
5.903
6.028
6.278
6.528
.037
.037
.037
.040
.040
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-364
8-365
8-366
8-367
8-368
6.778
7.028
7.278
7.528
7.778
.040
.040
.045
.045
.045
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-369
8-370
8-371
8-372
8-373
8.028
8.278
8.528
8.778
9.028
.045
.050
.050
.050
.050
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-374
8-375
8-376
8-377
8-378
9.278
9.528
9.778
10.028
10.528
.055
.055
.055
.055
.060
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-379
8-380
8-381
8-382
8-383
11.028
11.528
12.028
13.028
14.028
.060
.065
.065
.065
.070
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-384
8-385
8-386
8-387
8-388
15.028
16.008
17.008
18.008
19.006
.070
.075
.080
.085
.090
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-389
8-390
8-391
8-392
8-393
20.006
21.006
22.006
22.993
23.993
.095
.095
.100
.105
.110
.183
.183
.183
.183
.183
.005
.005
.005
.005
.005
8-394
8-395
24.993
25.993
.115
.120
.183
.183
.005
.005
Dash No.
46
Tol.
±
I.D.
Tol.
±
W
8-425
8-426
8-427
8-428
8-429
4.551
4.676
4.801
4.926
5.051
.033
.033
.033
.033
.037
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-430
8-431
8-432
8-433
8-434
5.176
5.301
5.426
5.551
5.676
.037
.037
.037
.037
.037
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-435
8-436
8-437
8-438
8-439
5.801
5.926
6.051
6.274
6.525
.037
.037
.037
.040
.040
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-440
8-441
8-442
8-443
8-444
6.774
7.024
7.274
7.524
7.774
.040
.040
.045
.045
.045
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-445
8-446
8-447
8-448
8-449
8.024
8.524
9.024
9.524
10.024
.045
.055
.055
.055
.055
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-450
8-451
8-452
8-453
8-454
10.524
11.024
11.524
12.024
12.524
.060
.060
.060
.060
.060
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-455
8-456
8-457
8-458
8-459
13.024
13.524
14.024
14.524
15.024
.060
.070
.070
.070
.070
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-460
8-461
8-462
8-463
8-464
15.524
16.004
16.504
17.004
17.504
.070
.075
.075
.080
.085
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-465
8-466
8-467
8-468
8-469
18.004
18.504
19.004
19.504
20.004
.085
.085
.090
.090
.096
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-470
8-471
8-472
8-473
8-474
21.004
22.004
23.004
24.004
25.004
.095
.100
.105
.110
.115
.236
.236
.236
.236
.236
.006
.006
.006
.006
.006
8-475
26.004
.120
.236
.006
Dash No.
Special Needs?
Just ask.We can help!
Tol.
±
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
PTFE Spiral
Back-Up Rings
NOMINAL
Series
No.
AS568
Dash
No.
I.D.
O.D.
A-Dia.
2107
2107
2107
2107
2107
-004
-005
-006
-007
-008
5/64
7/64
1/8
5/32
3/16
3/16
7/32
1/4
9/32
5/16
.078
.110
.125
.156
.188
2107
2107
2107
2107
2107
-009
-010
-011
-012
-013
7/32
1/4
5/16
3/8
7/16
11/32
3/8
7/16
1/2
9/16
.219
.250
.312
.375
.437
2107
2107
2107
2107
2107
-014
-015
-016
-017
-018
1/2
9/16
5/8
11/16
3/4
5/8
11/16
3/4
13/16
7/8
.500
.562
.625
.687
.750
2107
2107
2107
2107
2107
-019
-020
-021
-022
-023
13/16
7/8
15/16
1
1-1/16
15/16
1
1-1/16
1-1/8
1-3/16
.812
.875
.937
1.000
1.062
2107
2107
2107
2107
2107
-024
-025
-026
-027
-028
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1.125
1.187
1.250
1.312
1.375
2107
2107
2107
2107
2107
-110
-111
-112
-113
-114
3/8
7/16
1/2
9/16
5/8
9/16
5/8
11/16
3/4
13/16
.375
.438
.500
.562
.625
2107
2107
2107
2107
2107
-115
-116
-117
-118
-119
11/16
3/4
13/16
7/8
15/16
7/8
15/16
1
1-1/16
1-1/8
.687
.750
.812
.875
.937
2107
2107
2107
2107
-120
-121
-122
-123
1
1-1/16
1-1/8
1-3/16
1-3/16
1-1/4
1-5/16
1-3/8
1.000
1.062
1.125
1.187
T
W
.019
.016
.054
.052
Z
.062
.032
.056
.054
.029
.025
.078
.032
.093
.047
.078
.032
.089
.087
.093
.047
47
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
PTFE Spiral
Back-Up Rings (Continued)
NOMINAL
Series
No.
48
AS568
Dash
No.
I.D.
O.D.
A-Dia.
2107
2107
2107
2107
2107
-124
-125
-126
-127
-128
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1.250
1.312
1.375
1.437
1.500
2107
2107
2107
2107
2107
-129
-130
-131
-132
-133
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-3/4
1-13/16
1-7/8
1-15/16
2
1.562
1.625
1.687
1.750
1.812
2107
2107
2107
2107
2107
-134
-135
-136
-137
-138
1-7/8
1-15/16
2
2-1/16
2-1/8
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
1.875
1.937
2.000
2.062
2.125
2107
2107
2107
2107
2107
-139
-140
-141
-142
-143
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2.187
2.250
2.312
2.375
2.437
2107
2107
2107
2107
2107
-144
-145
-146
-147
-148
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
2.500
2.562
2.625
2.687
2.750
2107
2107
2107
2107
2107
-149
-210
-211
-212
-213
2-13/16
3/4
13/16
7/8
15/16
3
1
1-1/16
1-1/8
1-3/16
2.812
.750
.812
.875
.938
2107
2107
2107
2107
2107
-214
-215
-216
-217
-218
1
1-1/16
1-1/8
1-3/16
1-1/4
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1.000
1.062
1.125
1.188
1.250
2107
2107
2107
2107
2107
-219
-220
-221
-222
-223
1-5/16
1-3/8
1-7/16
1-1/2
1-5/8
1-9/16
1-5/8
1-5/8
1-3/4
1-7/8
1.312
1.375
1.438
1.500
1.625
2107
2107
2107
2107
2107
-224
-225
-226
-227
-228
1-3/4
1-7/8
2
2-1/8
2-1/4
2
2-1/8
2-1/4
2-3/8
2-1/2
1.750
1.875
2.000
2.125
2.250
2107
2107
2107
2107
2107
2107
-229
-230
-231
-232
-233
-234
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
2-5/8
2-3/4
2-7/8
3
3-1/8
3-1/4
2.375
2.500
2.625
2.750
2.875
3.000
T
W
Z
.093
.047
.089
.087
.182
.062
.029
.025
.122
.120
.093
.047
.121
.119
.250
.093
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
PTFE Spiral
Back-Up Rings (Continued)
NOMINAL
Series
No.
AS568
Dash
No.
I.D.
O.D.
A-Dia.
2107
2107
2107
2107
2107
-235
-236
-237
-238
-239
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
3.125
3.250
3.375
3.500
3.625
2107
2107
2107
2107
2107
-240
-241
-242
-243
-244
3-3/4
3-7/8
4
4-1/8
4-1/4
4
4-1/8
4-1/4
4-3/8
4-1/2
3.750
3.875
4.000
4.125
4.250
2107
2107
2107
2107
2107
-245
-246
-247
-248
-249
4-3/8
4-1/2
4-5/8
4-3/4
4-7/8
4-5/8
4-3/4
4-7/8
5
5-1/8
4.375
4.500
4.625
4.750
4.875
2107
2107
2107
2107
2107
-250
-251
-252
-253
-254
5
5-1/8
5-1/4
5-3/8
5-1/2
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5.000
5.125
5.250
5.375
5.500
2107
2107
2107
2107
2107
-255
-256
-257
-258
-259
5-5/8
5-3/4
5-7/8
6
6-1/4
5-7/8
6
6-1/8
6-1/4
6-1/2
5.625
5.750
5.875
6.000
6.250
2107
2107
2107
2107
2107
-260
-261
-262
-263
-264
6-1/2
6-3/4
7
7-1/4
7-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
6.500
6.750
7.000
7.250
7.500
2107
2107
2107
2107
2107
-265
-266
-267
-268
-269
7-3/4
8
8-1/4
8-1/2
8-3/4
8
8-1/4
8-1/2
8-3/4
9
7.750
8.000
8.250
8.500
8.750
2107
2107
2107
2107
2107
-270
-271
-272
-273
-274
9
9-1/4
9-1/2
9-3/4
10
9-1/4
9-1/2
9-3/4
10
10-1/4
9.000
9.250
9.500
9.750
10.000
2107
2107
2107
2107
2107
-325
-326
-327
-328
-329
1-1/2
1-5/8
1-3/4
1-7/8
2
1-7/8
2
2-1/8
2-1/4
2-3/8
1.500
1.625
1.750
1.875
2.000
2107
2107
2107
2107
2107
2107
-330
-331
-332
-333
-334
-335
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/8
2.125
2.250
2.375
2.500
2.625
2.750
T
W
Z
.029
.025
.121
.119
.250
.093
.036
.031
.186
.184
.188
.062
49
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
PTFE Spiral
Back-Up Rings (Continued)
NOMINAL
Series
No.
50
AS568
Dash
No.
I.D.
O.D.
A-Dia.
2107
2107
2107
2107
2107
-336
-337
-338
-339
-340
2-7/8
3
3-1/8
3-1/4
3-3/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
2.875
3.000
3.125
3.250
3.375
2107
2107
2107
2107
2107
-341
-342
-343
-344
-345
3-1/2
3-5/8
3-3/4
3-7/8
4
3-7/8
4
4-1/8
4-1/4
4-3/8
3.500
3.625
3.750
3.875
4.000
2107
2107
2107
2107
2107
-346
-347
-348
-349
-425
4-1/8
4-1/4
4-3/8
4-1/2
4-1/2
4-1/2
4-5/8
4-3/4
4-7/8
5
4.125
4.250
4.375
4.500
4.500
2107
2107
2107
2107
2107
-426
-427
-428
-429
-430
4-5/8
4-3/4
4-7/8
5
5-1/8
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
4.625
4.750
4.875
5.000
5.125
2107
2107
2107
2107
2107
-431
-432
-433
-434
-435
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-3/4
5-7/8
6
6-1/8
6-1/4
5.250
5.375
5.500
5.625
5.750
2107
2107
2107
2107
2107
-436
-437
-438
-439
-440
5-7/8
6
6-1/4
6-1/2
6-3/4
6-3/8
6-1/2
6-3/4
7
7-1/4
5.875
6.000
6.250
6.500
6.750
2107
2107
2107
2107
2107
-441
-442
-443
-444
-445
7
7-1/4
7-1/2
7-3/4
8
7-1/2
7-3/4
8
8-1/4
8-1/2
7.000
7.250
7.500
7.750
8.000
2107
2107
2107
2107
2107
-446
-447
-448
-449
-450
8-1/2
9
9-1/2
10
10-1/2
9
9-1/2
10
10-1/2
11
8.500
9.000
9.500
10.000
10.500
2107
2107
2107
2107
2107
-451
-452
-453
-454
-455
11
11-1/2
12
12-1/2
13
11-1/2
12
12-1/2
13
13-1/2
11.000
11.500
12.000
12.500
13.000
2107
2107
2107
2107
2107
-456
-457
-458
-459
-460
13-1/2
14
14-1/2
15
15-1/2
14
14-1/2
15
15-1/2
16
13.500
14.000
14.500
15.000
15.500
T
W
Z
.188/.062
.036
.031
.186
.184
.250
.093
.052
.046
.239
.237
.312
.188
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
PTFE Back-Up Rings
Solid
DASH
NO.
M
DIA.
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
.109
.124
.140
.171
.202
.234
.265
.327
.390
.455
.518
.580
.643
.705
.768
.830
.898
.960
1.023
1.085
1.148
1.210
1.273
1.335
1.398
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
.390
.452
.515
.577
.640
.702
.765
.832
.895
.957
1.020
1.082
1.145
1.207
1.270
1.332
1.397
1.459
1.522
NOTE:
± .001
± .001
Single Turn (Split)
T
.052.045
.052.045
W
.054.052
.087.085
G
.005.000
.006.000
DASH
NO.
M
DIA.
129
130
131
132
133
134
135
136
137
138
139
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
1.584
1.647
1.709
1.772
1.834
1.897
1.959
2.022
2.084
2.147
2.209
140
141
142
143
144
145
146
147
148
149
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
2.254
2.317
2.379
2.442
2.504
2.567
2.629
2.692
2.754
2.817
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
.766
.828
.891
.953
1.016
1.078
1.141
1.203
1.266
1.334
1.397
1.459
1.522
1.647
1.772
1.897
2.022
2.147
2.272
2.397
2.522
± .001
± .002
T
W
G
.052.045
.087.085
.006.000
.050
± .002
.088
± .001
N/A
.006.000
± .001
.052.045
.120.118
.007.000
Single Turn sizes listed are a complete listing of sizes on MS28774. Solid sizes are listed only where MS28774 does not list those sizes in the Single Turn
configuration. These Solid sizes are listed on MS27595. For sizes not included here, see “Teflon® Back-Up Rings - Extended Sizes” on page 53. Material
conforms to MIL-R-8791.
51
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
PTFE Back-Up Rings (Continued)
DASH
NO.
M
DIA.
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
2.630
2.755
2.880
3.005
3.130
3.255
3.380
3.505
3.630
3.755
3.880
4.005
4.130
4.255
4.380
4.505
4.630
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
1.513
1.638
1.763
1.888
2.013
2.138
2.268
2.393
2.518
2.643
2.768
2.893
3.018
3.143
3.273
3.398
3.523
3.648
3.773
3.898
4.028
4.153
NOTE:
52
± .002
± .001
T
.050
± .002
.075.065
W
.119
± .001
.184.182
G
N/A
.007.000
DASH
NO.
M
DIA.
347
348
349
Single Turn
Single Turn
Single Turn
4.278
4.403
4.528
425
426
427
428
429
430
431
432
433
434
435
436
437
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
Single Turn
4.551
4.676
4.801
4.926
5.051
5.176
5.301
5.426
5.551
5.676
5.801
5.926
6.051
438
439
440
441
442
443
444
445
Solid
Solid
Solid
Solid
Solid
Solid
Solid
Solid
6.252
6.502
6.752
7.002
7.252
7.502
7.752
8.002
446
447
448
449
450
Solid
Solid
Solid
Solid
Solid
8.502
9.002
9.502
10.002
10.502
± .003
451
452
453
454
455
Solid
Solid
Solid
Solid
Solid
11.002
11.502
12.002
12.502
13.002
± .004
456
457
458
459
460
Solid
Solid
Solid
Solid
Solid
13.502
14.002
14.502
15.002
15.502
± .005
± .001
T
W
G
.075.065
.184.182
.007.000
.110.100
.237.236
.008.000
± .002
.108
± .002
.236
± .001
N/A
Single Turn sizes listed are a complete listing of sizes on MS28774. Solid sizes are listed only where MS28774 does not list those sizes in the Single Turn
configuration. These Solid sizes are listed on MS27595. For sizes not included here, see “Teflon® Back-Up Rings - Extended Sizes” on page 53. Material
conforms to MIL-R-8791.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
PTFE Back-Up Rings
(Extended Sizes*) (Solid)
*MS28774 and MS27595 do not include all AS-568A Dash
Numbers. The sizes not included on MS28774 or
MS27595 are listed here in a solid configuration.
Dash
No.
001
002
003
M
T
W
1/32
3/64
1/16
.040.045
.030+.001
.040+.001
.047+.001
Dash Numbers 004-028 are listed on
MS28774 and/or MS27595
029
030
031
032
033
1-1/2
1-5/8
1-3/4
1-7/8
2
034
035
036
037
038
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
039
040
041
042
043
2-3/4
2-7/8
3
3-1/4
3-1/2
044
045
046
047
048
3-3/4
4
4-1/4
4-1/2
4-3/4
049
050
5
5-1/4
102
103
104
105
106
1/16
3/32
1/8
5/32
3/16
107
108
109
7/32
1/4
5/16
.052.045
.052.045
.054.052
.087.085
Dash
No.
M
M (NOM.)
T
W
Dash
No.
M
T
W
Dash Numbers 110-149 are listed on
MS28774 and/or MS27595
Dash Numbers 210-247 are listed on
MS28774 and/or MS27595
150
151
152
153
154
2-7/8
3
3-1/4
3-1/2
3-3/4
248
249
250
251
252
4-3/4
4-7/8
5
5-1/8
5-1/4
155
156
157
158
159
4
4-1/4
4-1/2
4-3/4
5
253
254
255
256
257
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
160
161
162
163
164
5-1/4
5-1/2
5-3/4
6
6-1/4
258
259
260
261
262
6
6-1/4
6-1/2
6-3/4
7
165
166
167
168
169
6-1/2
6-3/4
7
7-1/4
7-1/2
263
264
265
266
267
7-1/4
7-1/2
7-3/4
8
8-1/4
170
171
172
173
174
7-3/4
8
8-1/4
8-1/2
8-3/4
268
269
270
271
272
8-1/2
8-3/4
9
9-1/4
9-1/2
175
176
177
178
9
9-1/4
9-1/2
9-3/4
273
274
275
276
277
9-3/4
10
10-1/2
11
11-1/2
201
202
203
204
205
3/16
1/4
5/16
3/8
7/16
278
279
280
281
282
12
13
14
15
16
206
207
208
209
1/2
9/16
5/8
11/16
283
284
17
18
.052.045
.052.045
.087.085
.120.118
.052.045
.120.118
53
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
PTFE Back-Up Rings
(Extended Sizes*) (Solid) (Continued)
Dash
No.
M
309
310
311
312
313
7/16
1/2
9/16
5/8
11/16
314
315
316
317
318
3/4
13/16
7/8
15/16
1
319
320
321
322
323
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
324
1-3/8
T
.075.065
W
.184.182
Dash Numbers 325-349 are listed on
MS28774 and/or MS27595
350
351
352
353
354
4-5/8
4-3/4
4-7/8
5
5-1/8
355
356
357
358
359
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
360
361
362
363
364
5-7/8
6
6-1/4
6-1/2
6-3/4
365
366
367
368
369
7
7-1/4
7-1/2
7-3/4
8
370
371
372
8-1/4
8-1/2
8-3/4
54
.075.065
Dash
No.
M
373
374
375
376
377
9
9-1/4
9-1/2
9-3/4
10
378
379
380
381
382
10-1/2
11
11-1/2
12
13
383
384
385
386
387
14
15
16
17
18
388
389
390
391
392
19
20
21
22
23
393
394
395
24
25
26
T
W
Dash
No.
M
T
W
Dash Numbers 425-460 are listed on
MS28774 and/or MS27595
.075.065
.184.182
461
462
463
464
465
16
16-1/2
17
17-1/2
18
466
467
468
469
470
18-1/2
19
19-1/2
20
21
471
472
473
474
475
22
23
24
25
26
.184.182
Have Questions?
Please give us a call.
.110.100
.237.236
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Leather Back-Up Rings
Series 6244
(For Use With Series 6230 “O” Rings)
Series
6244 –
For Use With
6230 –
568 –
O.D.
+ 1/64”
I.D.
(Nom.)
W
+ .010
– .005
T
± .015
1
2
3
4
5
1
2
3
4
5
223
224
225
226
227
1-7/8
2
2-1/8
2-1/4
2-3/8
1-5/8
1-3/4
1-7/8
2
2-1/8
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
6
7
8
9
10
6
7
8
9
10
228
229
230
231
232
2-1/2
2-5/8
2-3/4
2-7/8
3
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
11
12
13
14
15
11
12
13
14
15
233
234
235
236
237
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
2-7/8
3
3-1/8
3-1/4
3-3/8
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
16
17
18
19
20
16
17
18
19
20
238
239
240
241
242
3-3/4
3-7/8
4
4-1/8
4-1/4
3-1/2
3-5/8
3-3/4
3-7/8
4
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
21
22
23
24
25
21
22
23
24
25
243
244
245
246
247
4-3/8
4-1/2
4-5/8
4-3/4
4-7/8
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
26
27
28
29
30
26
27
28
29
30
248
249
250
251
252
5
5-1/8
5-1/4
5-3/8
5-1/2
4-3/4
4-7/8
5
5-1/8
5-1/4
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
31
32
33
34
35
31
32
33
34
35
253
254
255
256
257
5-5/8
5-3/4
5-7/8
6
6-1/8
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
36
37
38
39
40
36
37
38
39
40
258
259
260
261
262
6-1/4
6-1/2
6-3/4
7
7-1/4
6
6-1/4
6-1/2
6-3/4
7
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
41
42
43
44
45
41
42
43
44
45
263
264
265
266
267
7-1/2
7-3/4
8
8-1/4
8-1/2
7-1/4
7-1/2
7-3/4
8
8-1/4
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
46
47
48
49
50
46
47
48
49
50
268
269
270
271
272
8-3/4
9
9-1/4
9-1/2
9-3/4
8-1/2
8-3/4
9
9-1/4
9-1/2
1/8
1/8
1/8
1/8
1/8
1/16
1/16
1/16
1/16
1/16
51
52
51
52
273
274
10
10-1/4
9-3/4
10
1/8
1/8
1/16
1/16
All sizes in inches.
55
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Leather Back-Up Rings
Series 6246
(For Use With Series 6227 “O” Rings)
Series
6246 —
O.D.
± .007
I.D.
(Nom.)
W
± .007
T
± .015
1
2
3
4
5
1
2
3
4
5
006
007
008
009
010
.250
.281
.312
.344
.375
1/8
5/32
3/16
7/32
1/4
.057
.057
.057
.057
.057
.062
.062
.062
.062
.062
6
7
8
9
10
6
7
8
9
10
011
012
110
111
112
.438
.500
.562
.625
.688
5/16
3/8
3/8
7/16
1/2
.057
.057
.090
.090
.090
.062
.062
.062
.062
.062
11
12
13
14
11
12
13
14
113
114
115
116
.750
.812
.875
.938
9/16
5/8
11/16
3/4
.090
.090
.090
.090
.062
.062
.062
.062
O.D.
± 1/64
I.D.
(Nom.)
W
+ .010 - .005
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
4-3/4
4-7/8
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/8
6-1/4
6-3/8
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/4
8-1/2
9
9-1/2
10
10-1/2
11
11-1/2
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
4-3/4
4-7/8
5
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/2
9
9-1/2
10
10-1/2
11
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.188
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
.240
Series
6246 —
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
All sizes in inches.
56
For Use With
6227 —
568—
For Use With
6227 —
568—
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
210
211
212
213
214
215
216
217
218
219
220
221
222
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
T
± .015
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.094
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Square Cut Ring Sizes & Dimensions
DASH NO. -006 to -050
DASH NO. -106 to -146
NOMINAL
CROSS SECTION
1/16 INCH
NOMINAL
CROSS SECTION
3/32 INCH
DASH
NO.
NOMINAL
SIZE
I.D.
O.D.
ACTUAL
SIZE (INCH)
I.D.
TOL.±
DASH
NO.
NOMINAL
SIZE
I.D.
O.D.
ACTUAL
SIZE (INCH)
I.D.
TOL. ±
106
107
108
109
3/16
7/32
1/4
5/16
3/8
13/32
7/16
1/2
.174
.206
.237
.299
.005
.005
.005
.005
.005
.005
.005
.005
110
111
112
113
3/8
7/16
1/2
9/16
9/16
5/8
11/16
3/4
.362
.424
.487
.549
.005
.005
.005
.007
.489
.551
.614
.676
.005
.007
.009
.009
114
115
116
117
5/8
11/16
3/4
13/16
13/16
7/8
15/16
1
.612
.674
.737
.799
.009
.009
.009
.010
7/8
15/16
1
1-1/16
.739
.801
.864
.926
.009
.009
.009
.009
118
119
120
121
7/8
15/16
1
1-1/16
1-1/16
1-1/8
1-3/16
1-1/4
.862
.924
.987
1.049
.010
.010
.010
.010
1
1-1/16
1-1/8
1-3/16
1-1/8
1-3/16
1-1/4
1-5/16
.989
1.051
1.114
1.176
.010
.010
.010
.011
122
123
124
125
1-1/8
1-3/16
1-1/4
1-5/16
1-5/16
1-3/8
1-7/16
1-1/2
1.112
1.174
1.237
1.299
.010
.012
.012
.012
026
027
028
029
1-1/4
1-5/16
1-3/8
1-1/2
1-3/8
1-7/16
1-1/2
1-5/8
1.239
1.301
1.364
1.489
.011
.011
.013
.013
126
127
128
129
1-3/8
1-7/16
1-1/2
1-9/16
1-9/16
1-5/8
1-11/16
1-3/4
1.362
1.424
1.487
1.549
.012
.012
.012
.015
030
031
032
033
1-5/8
1-3/4
1-7/8
2
1-3/4
1-7/8
2
2-1/8
1.614
1.739
1.864
1.989
.013
.015
.015
.018
130
131
132
133
1-5/8
1-11/16
1-3/4
1-13/16
1-13/16
1-7/8
1-15/16
2
1.612
1.674
1.737
1.799
.015
.015
.015
.015
034
035
036
037
2-1/8
2-1/4
2-3/8
2-1/2
2-1/4
2-3/8
2-1/2
2-5/8
2.114
2.239
2.364
2.489
.018
.018
.018
.018
134
135
136
137
1-7/8
1-15/16
2
2-1/16
2-1/16
2-1/8
2-3/16
2-1/4
1.862
1.925
1.987
2.050
.015
.017
.017
.017
038
039
040
041
2-5/8
2-3/4
2-7/8
3
2-3/4
2-7/8
3
3-1/8
2.614
2.739
2.864
2.989
.020
.020
.020
.024
042
043
044
045
046
047
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
3-3/8
3-5/8
3-7/8
4-1/4
4-3/8
4-5/8
3.239
3.489
3.739
3.989
4.239
4.489
.024
.024
.027
.027
.030
.030
138
139
140
141
2-1/8
2-3/16
2-1/4
2-5/16
2-5/16
2-3/8
2-7/16
2-1/2
2.112
2.175
2.237
2.300
.017
.017
.017
.020
142
143
144
145
2-3/8
2-7/16
2-1/2
2-9/16
2-9/16
2-5/8
2-11/16
2-3/4
2.362
2.425
2.487
2.550
.020
.020
.020
.020
048
049
4-3/4
5
4-7/8
5-1/8
4.739
4.989
.030
.037
146
2-5/8
2-13/16
2.612
.020
050
5-1/4
5-3/8
5.239
.037
006
007
008
009
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
.114
.145
.176
.208
.005
.005
.005
.005
010
011
012
013
1/4
5/16
3/8
7/16
3/8
7/16
1/2
9/16
.239
.301
.364
.426
014
015
016
017
1/2
9/16
5/8
11/16
5/8
11/16
3/4
13/16
018
019
020
021
3/4
1-3/16
7/8
15/16
022
023
024
025
Gland dimensions on page 58.
57
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Square Cut Ring Sizes & Dimensions (Continued)
DASH NO.-147 to -178
DASH NO.-201 TO -242
NOMINAL
CROSS SECTION
3/32 INCH
NOMINAL
CROSS SECTION
1/8 INCH
DASH
NO.
NOMINAL
SIZE
I.D.
ACTUAL
SIZE (INCH)
O.D.
I.D.
DASH
NO.
TOL. ±
ACTUAL
SIZE (INCH)
I.D.
O.D.
I.D.
TOL. ±
147
148
149
150
2-11/16
2-3/4
2-13/16
2-7/8
2-7/8
2-15/16
3
3-1/16
2.675
2.737
2.800
2.862
.022
.022
.022
.022
201
202
203
204
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
.171
.234
.296
.359
.005
.005
.005
.005
151
152
153
154
3
3-1/4
3-1/2
3-3/4
3-3/16
3-7/16
3-11/16
3-15/16
2.987
3.237
3.487
3.737
.024
.024
.024
.028
205
206
207
208
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
.421
.484
.546
.609
.005
.005
.007
.009
155
156
157
158
4
4-1/4
4-1/2
4-3/4
4-3/16
4-7/16
4-11/16
4-15/16
3.987
4.237
4.487
4.737
.028
.030
.030
.030
209
210
211
212
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
.671
.734
.796
.859
.009
.010
.010
.010
159
160
161
162
5
5-1/4
5-1/2
5-3/4
5-3/16
5-7/16
5-11/16
5-15/16
4.987
5.237
5.487
5.737
.035
.035
.035
.035
213
214
215
216
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
.921
.984
1.046
1.109
.010
.010
.010
.012
163
164
165
166
6
6-1/4
6-1/2
6-3/4
6-3/16
6-7/16
6-11/16
6-15/16
5.987
6.237
6.487
6.737
.035
.040
.040
.040
217
218
219
220
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1.171
1.234
1.296
1.359
.012
.012
.012
.012
167
168
169
170
7
7-1/4
7-1/2
7-3/4
7-3/16
7-7/16
7-11/16
7-15/16
6.987
7.237
7.487
7.737
.040
.045
.045
.045
221
222
223
224
1-7/16
1-1/2
1-5/8
1-3/4
1-11/16
1-3/4
1-7/8
2
1.421
1.484
1.609
1.734
.012
.015
.015
.015
171
172
173
174
8
8-1/4
8-1/2
8-3/4
8-3/16
8-7/16
8-11/16
8-15/16
7.987
8.237
8.487
8.737
.045
.050
.050
.050
225
226
227
228
1-7/8
2
2-1/8
2-1/4
2-1/8
2-1/4
2-3/8
2-1/2
1.859
1.984
2.109
2.234
.018
.018
.018
.020
175
176
177
178
9
9-1/4
9-1/2
9-3/4
9-3/16
9-7/16
9-11/16
9-15/16
8.987
9.237
9.487
9.737
.050
.055
.055
.055
229
230
231
232
2-3/8
2-1/2
2-5/8
2-3/4
3-5/8
2-3/4
2-7/8
3
2.359
2.484
2.609
2.734
.020
.020
.020
.024
233
234
235
236
2-7/8
3
3-1/8
3-1/4
3-1/8
3-1/4
3-3/8
3-1/2
2.859
2.984
3.109
3.234
.024
.024
.024
.024
237
238
239
240
3-3/8
3-1/2
3-5/8
3-3/4
3-5/8
3-3/4
3-7/8
4
3.359
3.484
3.609
3.734
.024
.024
.028
.028
241
242
3-7/8
4
4-1/8
4-1/4
3.859
3.984
.028
.028
Gland Dimensions
DASH NO.
58
NOMINAL
SIZE
WIDTH
-006 to -050
.099” ± .005
-106 to -146
.146” ± .005
-147 to -178
.146” ±.005
-201 to -242
.193” ±.005
-243 to -284
.193” ±.005
-309 to -350
.286” ±.005
-351 to -387
.286” ±.005
-425 to -465
.380” ±.005
DEPTH
.057” + .000
- .002
.090” + .000
- .002
.090” + .000
- .002
.1225” + .000
- .002
.1225” + .000
-.002
.187” +.000
-.002
.187” +.000
- .002
.240”+ .000
.002
GAP
.002”
.0025”
.0025”
.003”
.003”
.0035”
.0035”
.005”
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Square Cut Ring Sizes & Dimensions (Continued)
DASH NO.-243 to -284
DASH NO.-309 to -350
NOMINAL
CROSS SECTION
1/8 INCH
NOMINAL
CROSS SECTION
3/16 INCH
DASH
NO.
NOMINAL
SIZE
ACTUAL
SIZE (INCH)
DASH
NO.
I.D.
O.D.
I.D.
TOL. ±
243
244
245
246
4-1/8
4-1/4
4-3/8
4-1/2
4-3/8
4-1/2
4-5/8
4-3/4
4.109
4.234
4.359
4.484
.028
.030
.030
.030
309
310
311
312
247
248
249
250
4-5/8
4-3/4
4-7/8
5
4-7/8
5
5-1/8
5-1/4
4.609
4.734
4.859
4.984
.030
.030
.035
.035
251
252
253
254
5-1/8
5-1/4
5-3/8
5-1/2
5-3/8
5-1/2
5-5/8
5-3/4
5.109
5.234
5.359
5.484
255
256
257
258
5-5/8
5-3/4
5-7/8
6
5-7/8
6
6-1/8
6-1/4
259
260
261
262
6-1/4
6-1/2
6-3/4
7
263
264
265
266
NOMINAL
SIZE
I.D.
ACTUAL
SIZE (INCH)
O.D.
I.D.
TOL. ±
7/16
1/2
9/16
5/8
13/16
7/8
15/16
1
.412
.475
.537
.600
.005
.005
.007
.009
313
314
315
316
11/16
3/4
13/16
7/8
1-1/16
1-1/8
1-3/16
1-1/4
.662
.725
.787
.850
.009
.010
.010
.010
.035
.035
.035
.035
317
318
319
320
15/16
1
1-1/16
1-1/8
1-5/16
1-3/8
1-7/16
1-1/2
.912
.975
1.037
1.100
.010
.010
.010
.012
5.609
5.734
5.859
5.984
.035
.035
.035
.035
321
322
323
324
1-3/16
1-1/4
1-5/16
1-3/8
1-9/16
1-5/8
1-11/16
1-3/4
1.162
1.225
1.287
1.350
.012
.012
.012
.012
6-1/2
6-3/4
7
7-1/4
6.234
6.484
6.734
6.984
.040
.040
.040
.040
325
326
327
328
1-1/2
1-5/8
1-3/4
1-7/8
1-7/8
2
2-1/8
2-1/4
1.475
1.600
1.725
1.850
.015
.015
.015
.015
7-1/4
7-1/2
7-3/4
8
7-1/2
7-3/4
8
8-1/4
7.234
7.484
7.734
7.984
.045
.045
.045
.045
329
330
331
332
2
2-1/8
2-1/4
2-3/8
2-3/8
2-1/2
2-5/8
2-3/4
1.975
2.100
2.225
2.350
.018
.018
.018
.018
267
268
269
270
8-1/4
8-1/2
8-3/4
9
8-1/2
8-3/4
9
9-1/4
8.234
8.484
8.734
8.894
.050
.050
.050
.050
333
334
335
336
2-1/2
2-5/8
2-3/4
2-7/8
2-7/8
3
3-1/8
3-1/4
2.475
2.600
2.725
2.850
.020
.020
.020
.020
271
272
273
274
9-1/4
9-1/2
9-3/4
10
9-1/2
9-3/4
10
10-1/4
9.234
9.484
9.734
9.984
.055
.055
.055
.055
337
338
339
340
3
3-1/8
3-1/4
3-3/8
3-3/8
3-1/2
3-5/8
3-3/4
2.975
3.100
3.225
3.350
.024
.024
.024
.024
275
276
277
278
10-1/2
11
11-1/2
12
10-3/4
11-1/4
11-3/4
12-1/4
10.484
10.984
11.484
11.984
.055
.065
.065
.065
341
342
343
344
3-1/2
3-5/8
3-3/4
3-7/8
3-7/8
4
4-1/8
4-1/4
3.475
3.600
3.725
3.850
.024
.028
.028
.028
279
280
281
282
13
14
15
16
13-1/4
14-1/4
15-1/4
16-1/4
12.984
13.984
14.984
15.955
.065
.065
.065
.075
345
346
347
348
4
4-1/8
4-1/4
4-3/8
4-3/8
4-1/2
4-5/8
4-3/4
3.975
4.100
4.225
4.350
.028
.028
.030
.030
283
284
17
18
17-1/4
18-1/4
16.955
17.955
.080
.085
349
350
4-1/2
4-5/8
4-7/8
5
4.475
4.600
.030
.030
Gland dimensions on page 58.
59
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Square Cut Ring Sizes & Dimensions (Continued)
DASH NO.-351 to -387
DASH NO.-425 to -465
NOMINAL
CROSS SECTION
3/16 INCH
NOMINAL
CROSS SECTION
1/4 INCH
6.73 ± .13mm
DASH
NO.
NOMINAL
SIZE
NOMINAL
SIZE
ACTUAL
SIZE (INCH)
I.D.
O.D.
I.D.
425
426
427
428
4-1/2
4-5/8
4-3/4
4-7/8
5
5-1/8
5-1/4
5-3/8
4.475
4.600
4.725
4.850
.033
.033
.033
.033
.037
.037
.037
.037
429
430
431
432
5
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
4.975
5.100
5.225
5.350
.037
.037
.037
.037
5.725
5.850
5.975
6.225
.037
.037
.037
.040
433
434
435
436
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/8
6-1/4
6-3/8
5.475
5.600
5.725
5.850
.037
.037
.037
.037
6-7/8
7-1/8
7-3/8
7-5/8
7-7/8
8-1/8
8-3/8
8-5/8
6.475
6.725
6.975
7.225
7.475
7.725
7.975
8.225
.040
.040
.040
.045
.045
.045
.045
.050
437
438
439
440
441
442
443
444
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/4
5.975
6.225
6.475
6.725
6.975
7.225
7.475
7.725
.037
.040
.040
.040
.040
.045
.045
.045
8-1/2
8-3/4
9
9-1/4
8-7/8
9-1/8
9-3/8
9-5/8
8.475
8.725
8.975
9.225
.050
.050
.050
.055
445
446
447
448
8
8-1/2
9
9-1/2
8-1/2
9
9-1/2
10
7.975
8.475
8.975
9.475
.045
.055
.055
.055
375
376
377
378
9-1/2
9-3/4
10
10-1/2
9-7/8
10-1/8
10-3/8
10-7/8
9.475
9.725
9.975
10.475
.055
.055
.055
.060
449
450
451
452
10
10-1/2
11
11-1/2
10-1/2
11
11-1/2
12
9.975
10.475
10.975
11.475
.055
.060
.060
.060
379
380
381
382
11
11-1/2
12
13
11-3/8
11-7/8
12-3/8
13-3/8
10.975
11.475
11.975
12.975
.060
.065
.065
.065
453
454
455
456
12
12-1/2
13
13-1/2
12-1/2
13
13-1/2
14
11.975
12.475
12.975
13.475
.060
.060
.060
.070
383
384
385
386
14
15
16
17
14-3/8
15-3/8
16-3/8
17-3/8
13.975
14.975
15.955
16.955
.070
.070
.075
.075
457
458
459
460
14
14-1/2
15
15-1/2
14-1/2
15
15-1/2
16
13.975
14.475
14.975
15.475
.070
.070
.070
.070
387
18
18-3/8
17.955
.080
461
462
463
464
16
16-1/2
17
17-1/2
16-1/2
17
17-1/2
18
15.955
16.455
16.955
17.455
.075
.075
.080
.085
465
18
18-1/2
17.955
.085
I.D.
O.D.
I.D.
351
352
353
354
4-3/4
4-7/8
5
5-1/8
5-1/8
5-1/4
5-3/8
5-1/2
4.725
4.850
4.975
5.100
.030
.030
.037
.037
355
356
357
358
5-1/4
5-3/8
5-1/2
5-5/8
5-5/8
5-3/4
5-7/8
6
5.225
5.350
5.475
5.600
359
360
361
362
5-3/4
5-7/8
6
6-1/4
6-1/8
6-1/4
6-3/8
6-5/8
363
364
365
366
367
368
369
370
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/4
371
372
373
374
Gland dimensions on page 58.
60
DASH
NO.
ACTUAL
SIZE (INCH)
TOL. ±
TOL. ±
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
O-Ring Groove Design Criteria and Installation Data*
Seal Applications
All seal applications may be broken down into static (the O-Ring and metal surfaces remain relatively fixed) or dynamic
(the O-Ring moves relative to the mating surface).
Static Sealing
Most O-Rings are used in static service. They may be applied as face seals or radial seals. In face seal applications, the
O-Ring should seat against the low pressure side of the groove.
Dynamic Sealing
A moving seal may be further classified by the type of motion: reciprocating, oscillating, or rotating. The greatest
number of dynamic seals are used in reciprocating service in cylinders, valves, and linear actuators. Oscillating motion
is encountered in swivels and valve stems. When an O-Ring is used on a rotating shaft, it should be limited to light duty
where the shaft speed is low and some fluid bypass is acceptable.
In all dynamic applications, proper lubrication and good heat dissipation are essential to long seal life and performance.
In pneumatic applications, supplemental lubrication should be provided. Lubricants should be selected on the basis of
the material of which the O-Ring is made and the type of service to which it will be subjected. (See lubricant
descriptions and applications information on page 71.)
Design standards have been developed for each of the standard O-Ring cross sections and diameters. These are
published as SAE, MIL-Spec, and company standards. Adherence to the standard design recommendation will
guarantee satisfactory seal performance in most instances. Special consideration should be given to the following
areas:
Gland Shape
A basic rectangular groove is generally best. Special groove configurations are sometimes employed but are not
recommended.
*Complete O-Ring groove design criteria and dimensional data compiled to include all compounds and applications
can be quite voluminous. The information and data presented in this section is presented only as a basic introduction to
the subject as a general guide for most compounds and applications. It is not intended to address all possible situations
or contingencies. For further information or referral, contact your APG representative.
61
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Squeeze
Initial design squeeze or compression provides for low pressure sealing. Depending on the cross section (CS), a
squeeze from 10% to 35% is recommended. Higher percentage squeeze may be tolerated in static seals where friction
and wear are not considerations. In dynamic service, it is often desirable to reduce O-Ring compression to a minimum.
As a rule, design squeeze should not fall below 0.010 inch.
Pressure
Up to a certain point, sealing is enhanced by pressure. However, pressure may cause an increase in friction and
wear. Above 1500 psi, pressure may cause extrusion and seal failure in a standard gland configuration. An antiextrusion back-up ring, made of a tough, cut-resistant material such as leather, PTFE, or hard rubber, is suggested.
In static applications, it may be possible to modify the gland design to withstand the higher pressures without the
addition of a back-up ring.
62
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Surface Finish
The ideal surface finish for dynamic surfaces against which the O-Ring will rub is 5 to 16 µ inch RMS. Rougher and
smoother surfaces may result in increased friction and reduced seal life. Rougher finishes up to 64 µ inch RMS can be
tolerated in static applications.
Final Specification
End use plays a key role in O-Ring design. Dynamic seals, whether reciprocating, oscillating or rotating motion (or any
combination of these) call for the highest degree of precision in O-Ring design because of the dimensional variations
involved. Static applications on the other hand, permit wider tolerances, rougher surface finishes and greater applied
pressure limits without danger of failure.
1. Improper mechanical design - may cause excessive pressure on O-Ring, abrasion from friction (particularly
with dynamic seals), compression set.
2. Fluid attack - chemicals or oils may degrade O-Ring material; high fluid pressure may work O-Ring
beyond its limits, cause extrusion flow.
3. O-Ring design - dimension or cross-section may not be properly matched to the application; material may
not be sufficient to withstand fluids, pressures, dynamic friction abrasion.
4. Temperatures - excessive heat (either from ambient or fluid conditions) can cause degradation; excessive
cold can cause embrittlement.
63
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Gland Dimensional Data
(Inches)
AS 568A
Dash Nos.
H
Gland
Depth
Squeeze
Actual
D
Diametral
Clearance
%
No
Back-Ups
G
Groove Width
One
Back-Up
Two
Back-Ups
Radius
R
Reciprocating Seals
006-012
.055
to
.057
.010
to
.018
15
to
25
.002
to
.005
.093
to
.098
.138
to
.143
.205
to
.210
.005
to
.015
104-116
.088
to
.090
.010
to
.018
10
to
17
.002
to
.005
.140
to
.145
.171
to
.176
.238
to
.243
.005
to
.015
201-222
.121
to
.123
.012
to
.022
9
to
16
.003
to
.006
.187
to
.192
.208
to
.213
.275
to
.280
.010
to
.025
309-349
.185
to
.188
.017
to
.030
8
to
14
.003
to
.006
.281
to
.286
.311
to
.316
.410
to
.415
.020
to
.035
425-460
.237
to
.240
.029
to
.044
11
to
16
.004
to
.007
.375
to
.380
.408
to
.413
.538
to
.543
.020
to
.035
004-050
.050
to
.052
.015
to
.023
22
to
32
.002
to
.005
.093
to
.098
.138
to
.143
.205
to
.210
.005
to
.015
102-178
.081
to
.083
.017
to
.025
17
to
24
.002
to
.005
.140
to
.145
.171
to
.176
.238
to
.243
.005
to
.015
201-284
.111
to
.113
.022
to
.032
16
to
23
.003
to
.006
.187
to
.192
.208
to
.213
.275
to
.280
.010
to
.025
309-395
.170
to
.173
.032
to
.045
15
to
21
.003
to
.006
.281
to
.286
.311
to
.316
.410
to
.415
.020
to
.035
425-475
.226
to
.229
.040
to
.055
15
to
20
.004
to
.007
.375
to
.380
.408
to
.413
.538
to
.543
.020
to
.035
Static Seals
AS 568A
Dash Nos.
X
Groove
Depth
G
Groove Width
Squeeze
Actual
%
Liquids
R
Vacuum
and
Gases
Radius
Face Seals
004-050
.050
to
.054
.013
to
.023
19
to
32
.101
to
.107
.084
to
.089
.005
to
.015
102-178
.074
to
.080
.020
to
.032
20
to
30
.136
to
.142
.120
to
.125
.005
to
.015
201-284
.101
to
.107
.028
to
.042
20
to
30
.177
to
.187
.158
to
.164
.010
to
.025
309-395
.152
to
.162
.043
to
.063
21
to
30
.270
to
.290
.239
to
.244
.020
to
.035
425-475
.201
to
.211
.058
to
.080
21
to
29
.342
to
.362
.309
to
.314
.020
to
.035
H
Squeeze
D
G
R
Gland
Depth
%
Diametral
Clearance
Groove
Width
Radius
AS 568A
Dash Nos.
Rotary Seals
64
004-045
.065
to
.067
0-11
.012
to
.016
.075
to
.079
.005
to
.015
102-163
.097
to
.099
1-8.5
.012
to
.016
.108
to
.112
.005
to
.015
201-258
.133
to
.135
0-7
.016
to
.020
.144
to
.148
.010
to
.025
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Installation Data
(Inches)
AS 568A
DASH
NOS.
Static Seals
ID Sealing
OD Sealing
A
B
A
B
Reciprocating Seals
ID Sealing
OD Sealing
A
B
A
B
-001
-001-1/2
-002
-003
-004
-005
.101
.142
.132
.162
.181
.212
.040
.081
.053
.067
.081
.112
.105
.146
.138
.172
.206
.237
.044
.085
.059
.077
.106
.137
-006
-007
-008
-009
-010
.225
.256
.287
.318
.350
.125
.156
.187
.218
.250
.250
.281
.312
.343
.375
.150
.181
.212
.243
.275
.234
.265
.296
.328
.359
.124
.155
.186
.218
.249
.249
.280
.311
.343
.374
-011
-012
-013
-014
-015
.412
.475
.537
.600
.662
.312
.375
.437
.500
.562
.437
.500
.562
.625
.687
.337
.400
.462
.525
.587
.421
.484
.311
.374
.436
.439
-016
-017
-018
-019
-020
.725
.787
.850
.912
.975
.625
.687
.750
.812
.875
.750
.812
.875
.937
1.000
-021
-022
-023
-024
-025
1.037
1.100
1.162
1.225
1.287
.937
1.000
1.062
1.125
1.187
-026
-027
-028
-029
-030
1.350
1.412
1.475
1.600
1.725
-031
-032
-033
-034
-035
-036
-037
-038
-039
-040
Rotary Seals
ID Sealing
A
B
.202
.233
.072
.103
.139
.170
.201
.233
.264
.246
.277
.308
.340
.371
.116
.147
.178
.210
.241
.326
.389
.433
.496
.558
.621
.683
.303
.366
.428
.491
.553
.650
.712
.775
.837
.900
.746
.808
.871
.933
.996
.616
.678
.741
.803
.866
1.062
1.125
1.187
1.250
1.312
.962
1.025
1.087
1.150
1.212
1.058
1.121
1.183
1.246
1.308
.928
.991
1.053
1.116
1.178
1.250
1.312
1.375
1.500
1.625
1.375
1.437
1.500
1.625
1.750
1.275
1.337
1.400
1.525
1.650
1.371
1.433
1.496
1.621
1.746
1.241
1.303
1.366
1.491
1.616
1.850
1.975
2.100
2.225
2.350
1.750
1.875
2.000
2.125
2.250
1.875
2.000
2.125
2.250
2.375
1.775
1.900
2.025
2.150
2.275
1.871
1.996
2.121
2.246
2.371
1.741
1.866
1.991
2.116
2.241
2.475
2.600
2.725
2.850
2.975
2.375
2.500
2.625
2.750
2.875
2.500
2.625
2.750
2.875
3.000
2.400
2.525
2.650
2.775
2.900
2.496
2.621
2.746
2.871
2.996
2.366
2.491
2.616
2.741
2.865
Recommended Tolerances
(Inches)
AS 568A
Dash Nos.
-004
through
-012
A
B
+ .000
- .001
+ .000
- .001
-013
through
-050
-120
through
-178
+ .002
- .000
Questions?
Just ask.We can help!
+ .000
- .002
-201
through
-284
-309
through
-395
-425
through
-475
+ .003
- .000
+ .000
- .003
65
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Installation Data (Continued)
(Inches)
AS 568A
DASH
NOS.
66
Static Seals
ID Sealing
OD Sealing
A
B
A
B
Reciprocating Seals
ID Sealing
OD Sealing
A
B
A
B
-041
-042
-043
-044
-045
3.100
3.350
3.600
3.850
4.100
3.000
3.250
3.500
3.750
4.000
3.125
3.375
3.625
3.875
4.125
3.025
3.275
3.525
3.775
4.025
-046
-047
-048
-049
-050
4.350
4.600
4.850
5.100
5.350
4.250
4.500
4.750
5.000
5.250
4.375
4.625
4.875
5.125
5.375
4.275
4.525
4.775
5.025
5.275
-102
-103
-104
-105
.224
.256
.287
.318
.062
.094
.125
.156
.249
.281
.312
.343
.087
.119
.150
.181
.237
.269
.300
.331
.061
.093
.124
.155
.249
.281
.312
.343
-106
-107
-108
-109
-110
.349
.381
.412
.474
.537
.187
.219
.250
.312
.375
.374
.406
.437
.499
.562
.212
.244
.275
.337
.400
.362
.394
.425
.487
.550
.186
.218
.249
.311
.374
-111
-112
-113
-114
-115
.599
.662
.724
.787
.849
.437
.500
.562
.625
.687
.625
.687
.750
.812
.875
.463
.525
.588
.650
.713
.612
.675
.737
.800
.862
-116
-117
-118
-119
-120
.912
.974
1.037
1.099
1.162
.750
.812
.875
.937
1.000
.937
1.000
1.062
1.125
1.187
.775
.838
.900
.963
1.025
.925
-121
-122
-123
-124
-125
1.224
1.287
1.349
1.412
1.474
1.062
1.125
1.187
1.250
1.312
1.250
1.312
1.375
1.437
1.500
-126
-127
-128
-129
-130
1.537
1.599
1.662
1.724
1.787
1.375
1.437
1.500
1.562
1.625
-131
-132
-133
-134
-135
1.849
1.912
1.974
2.037
2.099
-136
-137
-138
-139
-140
-141
-142
-143
-144
-145
Rotary Seals
ID Sealing
A
B
3.121
3.371
3.621
3.871
4.121
2.991
3.241
3.491
3.741
3.991
.073
.105
.136
.167
.245
.277
.308
.339
.051
.083
.114
.145
.374
.406
.437
.499
.562
.198
.230
.261
.323
.386
.370
.402
.433
.495
.558
.176
.208
.239
.301
.364
.436
.499
.561
.624
.686
.624
.687
.749
.812
.874
.448
.511
.573
.636
.698
.620
.683
.745
.808
.870
.426
.489
.551
.614
.676
.749
.937
.761
.933
.995
1.058
1.120
1.183
.739
.801
.864
.926
.989
1.088
1.150
1.213
1.275
1.338
1.245
1.308
1.370
1.433
1.495
1.051
1.114
1.176
1.239
1.301
1.562
1.625
1.687
1.750
1.812
1.400
1.463
1.525
1.588
1.650
1.558
1.620
1.683
1.745
1.808
1.364
1.426
1.489
1.551
1.614
1.687
1.750
1.812
1.875
1.937
1.875
1.937
2.000
2.062
2.125
1.713
1.775
1.838
1.900
1.963
1.870
1.933
1.995
2.058
2.121
1.676
1.739
1.801
1.864
1.927
2.162
2.224
2.287
2.349
2.412
2.000
2.062
2.125
2.187
2.250
2.187
2.250
2.312
2.375
2.437
2.025
2.088
2.150
2.213
2.275
2.183
2.246
2.308
2.371
2.433
1.989
2.052
2.114
2.177
2.239
2.474
2.537
2.599
2.662
2.724
2.312
2.375
2.437
2.500
2.562
2.500
2.562
2.625
2.687
2.750
2.338
2.400
2.463
2.525
2.588
2.496
2.558
2.621
2.683
2.746
2.302
2.364
2.427
2.489
2.552
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Installation Data (Continued)
(Inches)
AS 568A
DASH
NOS.
Static Seals
ID Sealing
OD Sealing
A
B
A
B
Reciprocating Seals
ID Sealing
OD Sealing
A
B
A
B
Rotary Seals
ID Sealing
A
B
-146
-147
-148
-149
-150
2.787
2.849
2.912
2.974
2.037
2.625
2.687
2.750
2.812
2.875
2.812
2.875
2.937
3.000
3.062
2.650
2.713
2.775
2.838
2.900
2.808
2.871
2.933
2.996
3.058
2.614
2.677
2.739
2.802
2.864
-151
-152
-153
-154
-155
3.162
3.412
3.662
3.912
4.162
3.000
3.250
3.500
3.750
4.000
3.187
3.437
3.687
3.937
4.187
3.025
3.275
3.525
3.775
4.025
3.183
3.433
3.683
3.933
4.183
2.989
3.239
3.489
3.739
3.989
-156
-157
-158
-159
-160
4.412
4.662
4.912
5.162
5.412
4.250
4.500
4.750
5.000
5.250
4.437
4.687
4.937
5.187
5.437
4.275
4.525
4.775
5.025
5.275
4.433
4.683
4.933
5.183
5.433
4.239
4.489
4.739
4.989
5.239
-161
-162
-163
-164
-165
5.662
5.912
6.162
6.412
6.662
5.500
5.750
6.000
6.250
6.500
5.687
5.937
6.187
6.437
6.687
5.525
5.775
6.025
6.275
6.525
5.683
5.933
6.183
5.489
5.739
5.989
-166
-167
-168
-169
-170
6.912
7.162
7.412
7.662
7.912
6.750
7.000
7.250
7.500
7.750
6.937
7.187
7.437
7.687
7.937
6.775
7.025
7.275
7.525
7.775
-171
-172
-173
-174
-175
8.162
8.412
8.662
8.912
9.162
8.000
8.250
8.500
8.750
9.000
8.187
8.437
8.687
8.937
9.187
8.025
8.275
8.525
8.775
9.025
-176
-177
-178
9.412
9.662
9.912
9.250
9.500
9.750
9.437
9.687
9.937
9.275
9.525
9.775
-201
-202
-203
-204
-205
.409
.472
.534
.597
.659
.187
.250
.312
.375
.437
.437
.500
.562
.625
.687
.215
.278
.340
.403
.465
.427
.500
.562
.625
.687
.185
.248
.310
.373
.435
.437
.500
.562
.625
.687
.195
.258
.320
.383
.445
.439
.502
.564
.627
.689
.173
.236
.298
.361
.423
-206
-207
-208
-209
-210
.722
.784
.847
.909
.972
.500
.562
.625
.687
.750
.750
.812
.875
.937
1.000
.528
.590
.653
.715
.778
.750
.812
.875
.937
.990
.498
.560
.623
.685
.748
.750
.812
.875
.937
1.000
.508
.570
.633
.695
.758
.752
.814
.877
.939
1.002
.486
.548
.611
.673
.736
-211
-212
-213
-214
-215
1.034
1.097
1.159
1.222
1.284
.812
.875
.937
1.000
1.062
1.062
1.125
1.187
1.250
1.312
.840
.903
.965
1.028
1.090
1.052
1.115
1.177
1.240
1.302
.810
.873
.935
.998
1.060
1.062
1.125
1.187
1.250
1.312
.820
.883
.945
1.008
1.070
1.064
1.127
1.189
1.252
1.314
.798
.861
.923
.986
1.048
-216
-217
-218
-219
-220
1.347
1.409
1.472
1.534
1.597
1.125
1.187
1.250
1.312
1.375
1.375
1.437
1.500
1.562
1.625
1.153
1.215
1.278
1.340
1.403
1.365
1.427
1.490
1.552
1.615
1.123
1.185
1.248
1.310
1.373
1.375
1.437
1.500
1.562
1.625
1.133
1.195
1.258
1.320
1.383
1.377
1.439
1.502
1.564
1.627
1.111
1.173
1.236
1.298
1.361
67
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Installation Data (Continued)
(Inches)
AS 568A
DASH
NOS.
68
Static Seals
ID Sealing
OD Sealing
A
B
A
B
-221
-222
-223
-224
-225
1.659
1.722
1.847
1.972
2.097
1.437
1.500
1.625
1.750
1.875
1.687
1.750
1.875
2.000
2.125
1.465
1.528
1.653
1.778
1.903
-226
-227
-228
-229
-230
2.222
2.347
2.472
2.597
2.722
2.000
2.125
2.250
2.375
2.500
2.250
2.375
2.500
2.625
2.750
-231
-232
-233
-234
-235
2.847
2.972
3.097
3.222
3.347
2.625
2.750
2.875
3.000
3.125
-236
-237
-238
-239
-240
3.472
3.597
3.722
3.847
3.972
-241
-242
-243
-244
-245
Reciprocating Seals
ID Sealing
OD Sealing
A
B
A
B
1.677
1.740
1.435
1.498
1.687
1.750
1.445
1.508
Rotary Seals
ID Sealing
A
B
1.689
1.752
1.877
2.002
2.127
1.423
1.486
1.611
1.736
1.861
2.028
2.153
2.278
2.403
2.528
2.252
2.377
2.502
2.627
2.752
1.986
2.111
2.236
2.361
2.486
2.875
3.000
3.125
3.250
3.375
2.653
2.778
2.903
3.028
3.153
2.877
3.002
3.127
3.252
3.377
2.611
2.736
2.861
2.986
3.111
3.250
3.375
3.500
3.625
3.750
3.500
3.625
3.750
3.875
4.000
3.278
3.403
3.528
3.653
3.778
3.502
3.627
3.752
3.877
4.002
3.236
3.361
3.486
3.611
3.736
4.097
4.222
4.347
4.472
4.597
3.875
4.000
4.125
4.250
4.375
4.125
4.250
4.375
4.500
4.625
3.903
4.028
4.153
4.278
4.403
4.127
4.252
4.377
4.502
4.627
3.861
3.986
4.111
4.236
4.361
-246
-247
-248
-249
-250
4.722
4.847
4.972
5.097
5.222
4.500
4.625
4.750
4.875
5.000
4.750
4.875
5.000
5.125
5.250
4.528
4.653
4.778
4.903
5.028
4.752
4.877
5.002
5.127
5.252
4.486
4.611
4.736
4.861
4.986
-251
-252
-253
-254
-255
5.347
5.472
5.597
5.722
5.847
5.125
5.250
5.375
5.500
5.625
5.375
5.500
5.625
5.750
5.875
5.153
5.278
5.403
5.528
5.653
5.377
5.502
5.627
5.752
5.877
5.111
5.236
5.361
5.486
5.611
-256
-257
-258
-259
-260
5.972
6.097
6.222
6.472
6.722
5.750
5.875
6.000
6.250
6.500
6.000
6.125
6.250
6.500
6.750
5.778
5.903
6.028
6.278
6.528
6.002
6.127
6.252
5.736
5.861
5.986
-261
-262
-263
-264
-265
6.972
7.222
7.472
7.722
7.972
6.750
7.000
7.250
7.500
7.750
7.000
7.250
7.500
7.750
8.000
6.778
7.028
7.278
7.528
7.778
-266
-267
-268
-269
-270
8.222
8.472
8.722
8.972
9.222
8.000
8.250
8.500
8.750
9.000
8.250
8.500
8.750
9.000
9.250
8.028
8.278
8.528
8.778
9.028
-271
-272
-273
-274
-275
9.472
9.722
9.972
10.222
10.722
9.250
9.500
9.750
10.000
10.500
9.500
9.750
10.000
10.250
10.750
9.278
9.528
9.778
10.028
10.528
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Installation Data (Continued)
(Inches)
AS 568A
DASH
NOS.
Static Seals
ID Sealing
OD Sealing
A
B
A
B
Reciprocating Seals
ID Sealing
OD Sealing
A
B
A
B
-276
-277
-278
-279
-280
11.222
11.722
12.222
13.222
14.222
11.000
11.500
12.000
13.000
14.000
11.250
11.750
12.250
13.250
14.250
11.028
11.528
12.028
13.028
14.028
-281
-282
-283
-284
15.222
16.222
17.222
18.222
15.000
16.000
17.000
18.000
15.250
16.250
17.250
18.250
15.028
16.028
17.028
18.028
-309
-310
-311
-312
-313
-314
-315
.777
.840
.902
.965
1.027
1.090
1.152
.437
.500
.562
.625
.687
.750
.812
.812
.875
.937
1.000
1.062
1.125
1.187
.472
.535
.597
.660
.722
.785
.847
.805
.868
.930
.993
1.055
1.118
1.180
.435
.498
.560
.623
.685
.748
.810
.812
.875
.937
1.000
1.062
1.125
1.187
.442
.505
.567
.630
.692
.755
.817
-316
-317
-318
-319
-320
1.215
1.277
1.340
1.402
1.465
.875
.937
1.000
1.062
1.125
1.250
1.312
1.375
1.437
1.500
.910
.972
1.035
1.097
1.160
1.243
1.305
1.368
1.430
1.493
.873
.935
.998
1.060
1.123
1.250
1.312
1.375
1.437
1.500
.880
.942
1.005
1.067
1.130
-321
-322
-323
-324
-325
1.527
1.590
1.652
1.715
1.840
1.187
1.250
1.312
1.375
1.500
1.562
1.625
1.687
1.750
1.875
1.222
1.285
1.347
1.410
1.535
1.555
1.618
1.680
1.743
1.868
1.185
1.248
1.310
1.373
1.498
1.562
1.625
1.687
1.750
1.875
1.192
1.255
1.317
1.380
1.505
-326
-327
-328
-329
-330
1.965
2.090
2.215
2.340
2.465
1.625
1.750
1.875
2.000
2.125
2.000
2.125
2.250
2.375
2.500
1.660
1.785
1.910
2.035
2.160
1.993
2.118
2.243
2.368
2.493
1.623
1.748
1.873
1.998
2.123
2.000
2.125
2.250
2.375
2.500
1.630
1.755
1.880
2.005
2.130
-331
-332
-333
-334
-335
2.590
2.715
2.840
3.965
3.090
2.250
2.375
2.500
2.625
2.750
2.625
2.750
2.875
3.000
3.125
2.285
2.410
2.535
2.660
2.785
2.618
2.743
2.868
2.993
3.118
2.248
2.373
2.498
2.623
2.748
2.625
2.750
2.875
3.000
3.125
2.255
2.380
2.505
2.630
2.755
-336
-337
-338
-339
-340
3.215
3.340
3.465
3.590
3.715
2.875
3.000
3.125
3.250
3.375
3.250
3.375
3.500
3.625
3.750
2.910
3.035
3.160
3.285
3.410
3.243
3.368
3.493
3.618
3.743
2.873
2.998
3.123
3.248
3.373
3.250
3.375
3.500
3.625
3.750
2.880
3.005
3.130
3.255
3.380
-341
-342
-343
-344
-345
3.840
3.965
4.090
4.215
4.340
3.500
3.625
3.750
3.875
4.000
3.875
4.000
4.125
4.250
4.375
3.535
3.660
3.785
3.910
4.035
3.868
3.993
4.118
4.243
4.368
3.498
3.623
3.748
3.873
3.998
3.875
4.000
4.125
4.250
4.375
3.505
3.630
3.755
3.880
4.005
-346
-347
-348
-349
-350
4.465
4.590
4.715
4.840
4.965
4.125
4.250
4.375
4.500
4.625
4.500
4.625
4.750
4.875
5.000
4.160
4.285
4.410
4.535
4.660
4.493
4.618
4.743
4.868
4.123
4.248
4.373
4.498
4.500
4.625
4.750
4.875
4.130
4.255
4.380
4.505
-351
-352
-353
-354
-355
5.090
5.215
5.340
5.465
5.590
4.750
4.875
5.000
5.125
5.250
5.125
5.250
5.375
5.500
5.625
4.785
4.910
5.035
5.160
5.285
Rotary Seals
ID Seals
A
B
69
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Installation Data (Continued)
(Inches)
AS 568A
DASH
NOS.
70
Static Seals
ID Sealing
OD Sealing
A
B
A
B
Reciprocating Seals
ID Sealing
OD Sealing
A
B
A
B
-356
-357
-358
-359
-360
5.715
5.840
5.965
6.090
6.215
5.375
5.500
5.625
5.750
5.875
5.750
5.875
6.000
6.125
6.250
5.410
5.535
5.660
5.785
5.910
-361
-362
-363
-364
-365
6.340
6.590
6.840
7.090
7.340
6.000
6.250
6.500
6.750
7.000
6.375
6.625
6.875
7.125
7.375
6.035
6.285
6.535
6.785
7.035
-366
-367
-368
-369
-370
7.590
7.840
8.090
8.340
8.590
7.250
7.500
7.750
8.000
8.250
7.625
7.875
8.125
8.375
8.625
7.285
7.535
7.785
8.035
8.285
-371
-372
-373
-374
-375
8.840
9.090
9.340
9.590
9.840
8.500
8.750
9.000
9.250
9.500
8.875
9.125
9.375
9.625
9.875
8.535
8.785
9.035
9.285
9.535
-376
-377
-378
-379
-380
10.090
10.340
10.840
11.340
11.840
9.750
10.000
10.500
11.000
11.500
10.125
10.375
10.875
11.375
11.875
9.785
10.035
10.535
11.035
11.535
-381
-382
-383
-384
-385
12.340
13.340
14.340
15.340
16.340
12.000
13.000
14.000
15.000
16.000
12.375
13.375
14.375
15.375
16.375
12.035
13.035
14.035
15.035
16.035
-386
-387
-388
-389
-390
17.340
18.340
19.340
20.340
21.340
17.000
18.000
19.000
20.000
21.000
17.375
18.375
19.375
20.375
21.375
17.035
18.035
19.035
20.035
21.035
-391
-392
-393
-394
-395
22.340
23.340
24.340
25.340
26.340
22.000
23.000
24.000
25.000
26.000
22.375
23.375
24.375
25.375
26.375
22.035
23.035
24.035
25.035
26.035
-425
-426
-427
-428
-429
-430
4.952
5.077
5.202
5.327
5.452
5.577
4.500
4.625
4.750
4.875
5.000
5.125
5.000
5.125
5.250
5.373
5.500
5.625
4.584
4.673
4.798
4.923
5.048
5.173
4.971
5.096
5.221
5.346
5.471
5.596
4.497
4.622
4.747
4.872
4.997
5.122
5.002
5.127
5.252
5.377
5.502
5.627
4.528
4.653
4.778
4.903
5.028
5.153
-431
-432
-433
-434
-435
5.702
5.827
5.952
6.077
6.202
5.250
5.375
5.500
5.625
5.750
5.750
5.875
6.000
6.125
6.250
5.298
5.423
5.548
5.673
5.798
5.721
5.846
5.971
6.096
6.221
5.247
5.372
5.497
5.622
5.747
5.752
5.877
6.002
6.127
6.252
5.278
5.403
5.528
5.653
5.778
-436
-437
-438
-439
-440
6.327
6.452
6.702
6.952
7.202
5.875
6.000
6.250
6.500
6.750
6.375
6.500
6.750
7.000
7.250
5.923
6.048
6.298
6.548
6.798
6.346
6.471
6.721
6.971
7.221
5.872
5.997
6.247
6.497
6.747
6.377
6.502
6.752
7.002
7.252
5.903
6.028
6.278
6.528
6.778
Rotary Seals
ID Sealing
A
B
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Installation Data (Continued)
(Inches)
AS 568A
DASH
NOS.
Static Seals
ID Sealing
OD Sealing
A
B
A
B
Reciprocating Seals
ID Sealing
OD Sealing
A
B
A
B
-441
-442
-443
-444
-445
7.452
7.702
7.952
8.202
8.452
7.000
7.250
7.500
7.750
8.000
7.500
7.750
8.000
8.250
8.500
7.048
7.298
7.548
7.798
8.048
7.471
7.721
7.971
8.221
8.471
6.997
7.247
7.497
7.747
7.997
7.502
7.752
8.002
8.252
8.502
7.028
7.278
7.528
7.778
8.028
-446
-447
-448
-449
-450
8.952
9.452
9.952
10.452
10.952
8.500
9.000
9.500
10.000
10.500
9.000
9.500
10.000
10.500
11.000
8.548
9.048
9.548
10.048
10.548
8.971
9.471
9.971
10.471
10.971
8.497
8.997
9.497
9.997
10.497
9.002
9.502
10.002
10.502
11.002
8.528
9.028
9.528
10.028
10.528
-451
-452
-453
-454
-455
11.452
11.952
12.452
12.592
13.452
11.000
11.500
12.000
12.500
13.000
11.500
12.000
12.500
13.000
13.500
11.048
11.548
12.048
12.548
13.048
11.471
11.971
12.471
12.971
13.471
10.997
11.497
11.997
12.497
12.997
11.502
12.002
12.502
13.002
13.502
11.028
11.528
12.028
12.528
13.028
-456
-457
-458
-459
-460
13.952
14.452
14.952
15.452
15.952
13.500
14.000
14.500
15.000
15.500
14.000
14.500
15.000
15.500
16.000
13.548
14.048
14.548
15.048
15.548
13.971
14.471
14.971
15.471
15.971
13.497
13.997
14.497
14.997
15.497
14.002
14.502
15.002
15.502
16.002
13.528
14.028
14.528
15.028
15.528
-461
-462
-463
-464
-465
16.452
16.952
17.452
17.952
18.452
16.000
16.500
17.000
17.500
18.000
16.500
17.000
17.500
18.000
18.500
16.048
16.548
17.048
17.548
18.048
-466
-467
-468
-469
-470
18.952
19.452
19.952
20.452
21.452
18.500
19.000
19.500
20.000
21.000
19.000
19.500
20.000
20.500
21.500
18.548
19.048
19.548
20.048
21.048
-471
-472
-473
-474
-475
22.452
23.452
24.452
25.452
26.452
22.000
23.000
24.000
25.000
26.000
22.500
23.500
24.500
25.500
26.500
22.048
23.048
24.048
25.048
26.048
Rotary Seals
ID Sealing
A
B
71
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Axial Static
Surface
roughness:
seal contact
area and base
of groove
Rt=6-16µ
pulsating
pressure
Rt=6-16µ
Radial Dynamic
and Static
Surface roughness:
rod/cylinderbore
Rt=1-4µ
base of groove,
static Rt =6-16µ
base of groove,
dynamic Rt=6-10µ
Installation Data (Millimeters)
O-Ring
Cross Section
0.40
0.50
0.60
1.00 and 1.02
1.10,1.12 and 1.15
1.20
1.25 and 1.27
1.30
1.42 and 1.45
1.50 and 1.52
1.57, 1.60 and 1.63
1.78 and 1.8
1.83
1.90, 1.98, 2.00 and 2.02
2.08 and 2.1
2.20 and 2.21
2.26
2.30
2.40
2.46
2.50
2.60, 2.62 and 2.70
2.70 and 2.75
2.95 and 3.00
3.15
3.50, 3.53 and 3.60
4.00
4.50
5.00
5.33
5.50
5.70 and 5.80
6.00
6.30 and 6.35
6.50
7.00
7.20
7.50
8.00
8.20
8.40
9.00
9.50
10.00
11.00
12.00
14.00
15.00
16.00
Radial Dynamic and Static
Axial Static Only
Radius
Groove Width*
Groove
Depth
E+0.06
Tol.+0.06
0.28
0.35
0.45
0.80
0.90
0.95
1.00
1.05
1.15
1.20
1.30
1.45
1.50
1.65
1.70
1.85
1.85
1.90
2.00
2.05
2.10
2.25
2.30
2.50
2.70
3.10
3.50
4.00
4.30
4.70
4.80
5.00
5.30
5.60
5.70
6.10
6.20
6.50
7.00
7.10
7.50
7.80
8.30
8.70
9.60
10.50
12.20
13.20
14.00
F2+0.2
2
Backrings
Tol.+0.2
Groove
Depth
E1
Tol.+0.1
Groove
Width*
F3
Tol.+0.2
R
Without
Backring
With
Backring
Tol.+0.2
F1+0.2
1
Backring
Tol.+0.2
0.60
0.70
0.80
1.40
1.50
1.70
1.80
1.80
1.90
2.10
2.20
2.40
2.40
2.50
2.80
2.90
3.00
3.00
3.20
3.30
3.40
3.60
3.70
3.90
4.00
4.80
5.40
6.00
6.70
7.10
7.30
7.70
8.20
8.70
8.90
9.50
9.80
10.40
11.00
11.20
11.70
12.50
13.30
13.50
15.50
16.80
19.00
20.00
21.50
3.80
3.80
3.90
4.20
4.30
4.40
4.40
4.60
4.70
4.80
5.00
5.10
5.30
5.40
6.20
7.10
7.70
8.40
8.80
9.00
9.40
9.90
10.40
10.60
12.00
12.30
12.90
13.50
13.70
14.20
15.00
15.80
16.00
18.00
19.30
21.50
22.50
24.00
5.20
5.20
5.30
5.60
5.70
5.80
5.80
6.00
6.10
6.20
6.40
6.50
6.70
6.80
7.60
8.80
9.40
10.10
10.50
10.70
11.10
11.60
12.10
12.30
14.50
14.80
15.40
16.00
16.20
16.70
17.50
18.30
18.50
20.50
21.80
24.00
25.00
26.50
0.28
0.35
0.40
0.65
0.75
0.80
0.85
0.90
0.95
1.00
1.10
1.20
1.25
1.40
1.45
1.55
1.55
1.60
1.70
1.75
1.80
1.90
1.95
2.20
2.30
2.70
3.10
3.40
3.90
4.30
4.40
4.60
4.80
5.10
5.40
5.80
5.90
6.20
6.60
6.70
6.90
7.40
7.80
8.30
9.10
10.30
11.60
12.50
13.50
0.60
0.70
0.80
1.40
1.50
1.70
1.80
1.80
1.90
2.10
2.20
2.40
2.40
2.50
2.80
2.90
3.00
3.00
3.20
3.30
3.40
3.60
3.70
3.90
4.00
4.80
5.40
6.00
6.70
7.10
7.30
7.70
8.20
8.70
8.90
9.50
9.80
10.40
11.00
11.20
11.70
12.50
13.30
13.50
15.50
16.80
19.00
20.00
21.50
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.8
0.8
1.0
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
3.0
3.0
3.0
3.0
3.0
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.4
0.4
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
F+0.2
*Recommendation if the free swell of the O-Rings is less than 10% the groove width can be up to 15% smaller.
72
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Kits
O-Ring Kits
Kits are ready to use in compact, self-contained,
cases. The most popular standard and metric sizes
are available in several different compounds. The
charts below indicate available configurations.
STANDARD KITS
METRIC KITS
NUMBER OF PIECES
EUROPEAN ASSORTMENT†
CONTOURED
CONTOURED
SIZE
TYPE B*
(382 Total)
TYPE A**
(380 Total)
BACK-UP RINGS ***
BACK-UP-RINGS***
(756 TOTAL)
006
007
008
009
010
011
012
110
111
112
113
114
115
116
210
211
212
213
214
215
216
217
218
219
220
221
222
325
326
327
20
20
20
20
20
20
20
13
13
13
13
13
13
13
10
10
10
10
10
10
10
10
10
10
10
10
10
7
7
7
16
16
16
16
16
16
16
16
16
16
16
16
16
16
12
12
12
12
12
12
12
12
12
12
7
7
7
5
5
5
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
18
18
18
*Type B -
**Type A -
H70K
H90K
V70K
VB75K
V90K
VB90K
S70K
A80K
N70K
E70K
QH70K
U90K
SH70K
Nitrile
Nitrile
Fluoroelastomer (Black)
Fluoroelastomer (Brown)
Fluoroelastomer (Black)
Fluoroelastomer (Brown)
Silicone
Aflas®
Chloroprene
EPR
Nitrile Q-Rings
Urethane
Nitrile Square Cut Rings
TFEK
PTFE
***ContouredHB90K
Back-up
Rings
Nitrile
SIZE
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
NO. OF PIECES
(385 Total)
3.00
4.00
5.00
6.00
7.00
8.00
10.00
10.00
11.00
12.00
14.00
16.00
17.00
19.00
19.00
20.00
22.00
24.00
25.00
27.00
28.00
30.00
32.00
33.00
35.00
36.00
38.00
38.00
41.00
44.00
16
16
16
16
16
16
16
13
13
13
13
13
13
13
11
12
12
12
12
12
12
12
12
12
12
12
12
9
9
9
HYDRAULIC FITTING KIT
JAPANESE ASSORTMENT††
SIZE
1.90
1.90
1.90
1.90
1.90
1.90
1.90
2.40
2.40
2.40
2.40
2.40
2.40
2.40
3.00
3.00
3.10
3.10
3.10
3.10
3.10
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
NO. OF PIECES
(396 Total)
SIZE
NO. OF
PIECES
(620 TOTAL)
20
20
18
18
18
18
18
14
14
14
14
14
14
13
11
12
12
11
11
11
11
10
10
10
10
10
10
10
10
10
011
012
014
016
018
021
025
029
210
214
219
222
225
228
232
904
905
906
908
910
912
914
916
920
924
932
30
30
30
30
30
30
30
30
20
20
20
20
10
10
10
30
30
30
30
30
30
30
30
10
10
10
2.80
3.80
4.80
5.80
6.80
7.80
8.80
9.80
10.80
11.80
13.80
15.80
17.80
19.80
20.00
22.00
24.40
29.40
34.40
39.40
44.40
22.10
24.70
25.70
29.70
31.70
33.70
35.70
39.70
47.70
70 Durometer †European Kits - M70K Metric Nitrile 70 Durometer
90 Durometer
75 Durometer
MV75K Metric Fluoroelastomer (Black) 75 Durometer
75 Durometer
90 Durometer
90 Durometer
70 Durometer
80 Durometer ††Japanese Kits - M7OKJ Metric Nitrile 70 Durometer
70 Durometer
70 Durometer
M90KJ Metric Nitrile 90 Durometer
70 Durometer
90 Durometer
70 Durometer
H90KHYDKIT
Nitrile
90 Durometer
VB90KHYDKIT
Fluoroelastomer
90 Durometer
90 Durometer
73
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
O-Ring Kits (continued)
SPLIT FLANGE KITS
FLAT FACE KITS
SIZE
NO. OF
PIECES
(95 TOTAL)
210
10
011
25
212
10
012
25
214
SIZE
10
219
15
222
15
225
15
228
8
232
6
237
6
014
016
25
018
25
021
25
025
10
1.60 x 8.10
20
2.40 x 9.30
20
2.00 x 11.50
20
2.40 x 13.30
20
2.40 x 15.60
10
909
10
2.40 x 19.80
10
912
10
916
10
3.00 x 39.20
5
H90MSTRAIGHT
Nitrile
90 Durometer
H90KFACE
Nitrile
90 Durometer
VB90KFLANGE
Fluoroelastomer (Brown)
90 Durometer
VB90KFACE
Fluoroelastomer (Brown)
90 Durometer
BOSS KITS
BSP FITTING KIT
NO. OF
PIECES
(105 TOTAL)
SIZE
NO. OF
PIECES
(105 TOTAL)
SIZE
2.00 X 6.00
20
010
20
2.00 X 10.00
20
111
20
2.50 X 13.00
20
113
20
2.50 X 19.00
10
2.62 X 17.86
10
2.50 X 25.00
10
2.62 X 20.63
10
2.50 X 33.00
10
119
10
3.00 X 40.00
10
217
10
3.00 X 50.00
5
222
5
H90STAPLOK
Nitrile
90 Durometer
TRUCK REFRIGERATION KIT
12 SIZES
H90MBSP
Nitrile
90 Durometer
R134A AUTO A/C KIT
NO. OF
PIECES
(212 TOTAL)
NO. OF
PIECES
(300 TOTAL)
MATERIAL
SIZE
SIZE
NO. OF
PIECES
(240 TOTAL)
SIZE
SIZE
NO. OF
PIECES
(480 TOTAL)
STYLE
(COLOR)
901
902
903
904
905
906
907
908
909
910
911
912
913
914
916
918
920
924
928
932
10
10
10
10
12
12
12
12
12
12
10
10
10
10
10
10
10
10
10
10
901
902
903
904
905
906
907
908
909
910
911
912
913
914
916
918
920
924
928
932
25
25
25
25
25
20
20
15
15
15
15
15
-
011
50
CHLOROPRENE
008
50
GREEN
011
50
BLUE
011
50
HNBR (Green)
011
50
GREEN
013
50
BLUE
013
50
GREEN
015
25
BLUE
015
25
GREEN
017
25
BLUE
017
25
GREEN
108
50
BLUE
110
50
BLUE
112
30
BLUE
H90KB0SS
Nitrile
90 Durometer
H90KBOSS12
Nitrile
90 Durometer
VB90KBOSS
Fluoroelastomer (Brown)
90 Durometer
VB90KBOSS12
Fluoroelastomer (Brown)
90 Durometer
74
SIZE
15
029
STAPLOK KIT
NO. OF
PIECES
(135 TOTAL)
25
H90KFLANGE
Nitrile
90 Durometer
20 SIZES
MALESTRAIGHTTHREADELBOWKIT
NO. OF
PIECES
(175 TOTAL)
013
50
CHLOROPRENE
013
50
HNBR (Green)
015
25
CHLOROPRENE
015
25
HNBR (Green)
017
25
CHLOROPRENE
017
25
HS/N70K Chloroprene 70 Durometer/
Green HNBR 70 Durometer
HNBR (Green)
HS/HST70K HNBR (HSN)
Green & Blue TFE Coated
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
O-Ring Kits (continued)
WAREHOUSE KITS*
STANDARD KITS
SIZE
NO. OF
PIECES
(1326 Total)
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
210
50
50
50
50
50
50
50
50
50
30
30
30
30
30
30
25
25
25
25
25
30
30
30
30
30
30
15
15
15
15
15
15
15
15
15
15
H70KW
V70KW
Nitrile
Fluoroelastomer
SIZE
METRIC KITS
NO. OF
PIECES
211
15
212
15
213
15
214
15
215
15
216
10
217
10
218
10
219
10
220
10
221
10
222
10
223
10
224
10
320
6
321
6
322
6
323
6
324
6
325
6
326
6
327
6
328
6
329
6
330
6
425
3
426
3
427
3
428
3
O-RING CORD
DIAMETER
LENGTH
0.070”
7’
0.103”
7’
0.139”
7’
0.210”
7’
0.275”
7’
70 Durometer
70 Durometer
NO. OF
PIECES
(1465 Total)
SIZE
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
M70KW
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
5.00
6.00
7.00
8.00
9.00
10.00
12.00
14.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
14.00
15.00
16.00
17.00
18.00
20.00
22.00
30.00
40.00
10.00
11.00
12.00
13.00
14.00
15.00
16.00
17.00
18.00
19.00
22.00
Metric Nitrile
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
10
10
10
10
25
25
25
10
10
10
10
10
10
10
10
2.50
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
SIZE
NO. OF
PIECES
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
25.00
9.00
12.00
14.00
15.00
16.00
18.00
19.00
20.00
22.00
24.00
25.00
27.00
28.00
30.00
32.00
33.00
34.00
35.00
36.00
38.00
44.00
45.00
54.00
38.00
41.00
44.00
O-RING CORD
DIAMETER
1.50 mm
2.00 mm
2.50 mm
3.00 mm
3.50 mm
4.00 mm
5.00 mm
5.70 mm
8.40 mm
LENGTH
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
70 Durometer
*Each kit is contained in a 38-drawer storage box with the o-rings and cord stock as listed above,
plus two o-ring picks, razor blade, cutting and splicing jig, and rapidset adhesive.
75
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
O-Ring Splicing Kits
Contains everything necessary for making on-the-job custom ORings. Eliminates waiting and down time. Each kit includes razor
blade, cutting and splicing jig, rapid-set adhesive, and cord stock
as listed in the chart below.
SPLICING KIT CORD CONTENTS
PART
NUMBER
ORSKB
ORSKV
ORSKMB
CORD
DIAMETER
LENGTH
Buna-N(Inches)
Viton®
.103”
.139”
.210”
.275”
7 ft.
7 ft.
7 ft.
7 ft.
Buna-N(Metric)
1.50mm
2.00mm
2.50mm
3.00mm
3.50mm
4.00mm
5.00mm
5.70mm
8.40mm
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
COMPOUND
Remember:
Same or next day shipment on stock items.
76
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Vulcanizing
As described in the preceding pages of this catalog, APG has
one of the largest inventories of O-Rings in North America. This
inventory consists of “standard” sizes manu-factured to the
dimensions outlined throughout this catalog. There is, however, a
very large and growing demand for “non-standard” O-Ring sizes
that must be custom fabricated. APG meets this demand with the
extensive capabilities of our vulcanizing department.
These non-standard O-Ring sizes are fabricated to the exact specifications of our customers from the cord stock described in the
following pages. APG maintains large inventories of these stock materials so that O-Rings can be fabricated quickly and shipped
instantly. We also vulcanize extrusions which are described after the cord stock items. Non-stock materials and sizes are also
available by special order.
In addition, we vulcanize gaskets which are too large to be cut in
one piece. These are cut in sections and vulcanized to
accommodate virtually any requirement. Rubber sleeves and
other custom products are also routinely vulcanized by the
experienced personnel in this highly capable department at APG.
Non-Standard Requirements?
Our Vulcanizing Department can help!
77
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Standards for Spliced Extrusions
Testing Procedure
The manufacture of extrusions in circular or rectangular shaped
gaskets, or a combination of both can be accomplished by
means of butt or beveled vulcanized splices. The splice is
usually never as strong as the original material from which the
gasket is made. The stronger the splice is required to be, the
more difficult the labor operations. A pressure mark will appear
at the splice area due to the required holding pressure in the
mold.
The method of testing splices should be given serious
consideration. Doubling over, pinching, twisting, or bending
back a splice are not proper methods of testing. Splice strength
varies with the configuration of the cross section of the extrusion.
For this reason, splice strength is very difficult to define.
Pulling perpendicular to the plane of the splice is a sufficient test
in the testing of a splice. The gasket should be clamped in such a
way that the pull is evenly distributed over the splice.
Tolerances must be allowed in the length between splices.
These tolerances must be varied according to length between
splices and due to the method of making the splice. Tolerances
for commercial class splices are listed in the following table.
These tolerances are applicable for both conventional splices
and injection splices.
Spliced Length Tolerances
RMA Drawing Designation Class 2 (Commercial)
Inches
Cross Section
>0 >10 >15 >25 >40 >63 >100
≤
≤
≤
≤
≤
≤
10
15
25
40
63
100
Millimeters
Tolerance
± .250
± .280
± .315
± .355
± .400
± .450
± .500
Cross Section
>0
>250
>400
>630
>1000
>1600
>2500
-
≤
≤
≤
≤
≤
≤
250
400
630
1000
1600
2500
Tolerance
± 6.30
± 7.10
± 8.00
± 9.00
± 10.00
± 11.20
± 12.50
Design of Extruded Endless Splices
When designing endless splices for extruded profiles, several
factors must be considered: compound durometer, cut length,
size of cross section, and (in the case of tubing) wall thickness.
Mold cavities are normally designed to the nominal dimension. If
the extrusion cross section is at its upper tolerance limit, mold
pressure marks will be visible on the surface. This phenomenon
is accentuated with the use of lower durometer compounds. If
the extrusion cross section is at its lower tolerance limit, the mold
78
cavity would have to be shimmed in order to attain the splicing
pressure necessary to create surface marking. The potential for
size differences at each end of a cut length increases with the
length of the cut. (One end may be at the upper tolerance limit,
and the other end may be at the lower tolerance limit.) Generally,
this gives the appearance of a step or mismatch. The illustration
below illustrates the phenomena of mold pressure marks and
apparent mismatches.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
O-Ring Cord Stock
The charts below represent the compounds and sizes of O-Ring cord currently stocked
by APG. Call for availability of other items.
Style 0284
Buna-N O-Ring Cord
70 Durometer
Cross Section
Nominal (Inches)
Part
Actual (Inches)
.062 ± .005
.070 ± .005
.093 ± .005
.103 ± .005
.125 ± .005
.139 ± .007
.187 ± .007
.210 ± .007
.250 ± .008
.275 ± .008
.312 ± .010
.375 ± .010
.437 ± .010
.500 ± .012
.562 ± .012
.625 ± .012
.750 ± .016
.812 ± .025
.875 ± .025
1.000 ± .025
1.250 ± .046
1.500 ± .051
1/16
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
13/16
7/8
1
1 1/4
1 1/2
Number
0284062
0284070
0284093
0284103
0284125
0284139
0284187
0284210
0284250
0284275
0284312
0284375
0284437
0284500
0284562
0284625
0284750
0284812
0284875
02841
02841250
02841500
Style 0284H
Buna-N O-Ring Cord
90 Durometer
Cross Section
Nominal (Inches)
Part
Actual (Inches)
3/32
.103 ± .005
.125 ± .005
.139 ± .007
.187 ± .007
.210 ± .007
.250 ± .008
.275 ± .008
.312 ± .010
.375 ± .010
.437 ± .010
.500 ± .012
1/8
3/16
1/4
5/16
3/8
7/16
1/2
Style 0M284B
Cross Section
Millimeters
Inches
1
2
2.4
3
4
4.5
5
5.7
6
8
8.4
9
10
12
14
.040 ± .005
.079 ± .005
.094 ± .005
.118 ± .006
.157 ± .007
.177 ± .007
.196 ± .007
.224 ± .007
.236 ± .007
.315 ± .010
.331 ± .010
.354 ± .010
.394 ± .010
.472 ± .010
.551 ± .015
Part
Number
0M284B1
0M284B2
0M284B2.4
0M284B3
0M284B4
0M284B4.5
0M284B5
0M284B5.7
0M284B6
0M284B8
0M284B8.4
0M284B9
0M284B10
0M284B12
0M284B14
Nominal (Inches)
Part
Actual (Inches)
1/8
3/16
1/4
5/16
3/8
1/2
5/8
.139 ± .007
.210 ± .007
.275 ± .008
.312 ± .010
.375 ± .010
.500 ± .012
.625 ± .012
Cross Section
1/16
3/32
1/8
3/16
1/4
1/2
Number
0284S139
0284S210
0284S275
0284S312
0284S375
0284S500
0284S625
Buna-N Q-Ring Cord
70 Durometer
Style 0Q284
Nominal (Inches)
0284H103
0284H125
0284H 139
0284H187
0284H210
0284H250
0284H275
0284H312
0284H375
0284H437
0284H500
Buna-N O-Ring Cord
50 Durometer
Style 0284S
Cross Section
Buna-N O-Ring Cord
70 Durometer (Metric)
Number
Actual (Inches)
.070 ± .008
.103 ± .010
.139 ± .010
.210 ± .010
.275 ± .010
.500 ± .010
Part
Number
0Q284070
0Q284103
0Q284139
0Q284210
0Q284275
0Q284500
79
www.callapg.com
713-675-5271
1-800-888-5223
Buna-N O-Ring Cord
70 Durometer (Square)
Style 0296
Cross Section
Nominal (Inches)
1/8
3/16
1/4
5/16
3/8
1/2
.133 ± .007
.202 ± .010
.264 ± .016
.313 ± .020
.375 ± .020
.500 ± .025
1/16
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
0296133
0296202
0296264
0296313
0296375
0296500
Actual (Inches)
Number
0283070
0283093
0283103
0283125
0283139
0283187
0283210
0283250
0283275
0283312
0283375
0283437
0283500
0283625
0283750
02831
Fluoroelastomer
Q-Ring Cord 75
Durometer
Cross Section
Nominal (Inches)
1/16
3/32
1/8
3/16
1/4
3/8
1/2
Part
Actual (Inches)
.070 ± .007
.103 ± .007
.139 ± .010
.210 ± .012
.275 ± .012
.375 ± .014
.500 ± .018
Cross Section
Brown Fluoroelastomer
O-Ring Cord
75 Durometer
Cross Section
Nominal (Inches)
1/8
3/16
1/4
5/16
3/8
7/16
1/2
80
Actual (Inches)
.125 ± .013
.139 ± .016
.187 ± .016
.210 ± .016
.250 ± .016
.275 ± .020
.312 ± .020
.375 ± .020
.437 ± .025
.500 ± .025
Part
Number
0283VB125
0283VB139
0283VB187
0283VB210
0283VB250
0283VB275
0283VB312
0283VB375
0283VB437
0283VB500
0Q283070
0Q283103
0Q283139
0Q283210
0Q283275
0Q283375
0Q283500
Part
Nominal (Inches)
Actual (Inches)
Number
1/16
3/32
.070 ± .004
.103 ± .006
.125 ± .013
.139 ± .016
0283H070
0283H103
0283H125
0283H139
.187 ± .016
.210 ± .016
.250 ± .016
.275 ± .020
.312 ± .020
.375 ± .020
0283H187
0283H210
0283H250
0283H275
0283H312
0283H375
1/8
3/16
1/4
5/16
3/8
Style 0M283V
Fluoroelastomer O-Ring Cord
75 Durometer (Metric)
Cross Section
Style 0283VB
Number
Fluoroelastomer O-Ring Cord
90 Durometer
Style 0283H
Part
.070 ± .010
.093 ± .010
.103 ± .013
.125 ± .013
.139 ± .016
.187 ± .016
.210 ± .016
.250 ± .016
.275 ± .020
.312 ± .020
.375 ± .020
.437 ± .025
.500 ± .025
.625 ± .025
.750 ± .032
1.000 ± .032
3/32
Number
Fluoroelastomer O-Ring
Cord 75 Durometer
Cross Section
Nominal (Inches)
Style 0Q283
Part
Actual (Inches)
Style 0283
FAX 713-675-2730
FAX 1-800-444-3252
Part
Millimeters
Inches
2
2.5
3
4
5
5.7
6
8
9
10
12
14
.079 ± .004
.098 ± .005
.119 ± .005
.157 ± .007
.196 ± .008
.224 ± .010
.236 ± .010
.315 ± .012
.354 ± .013
.393 ± .014
.472 ± .018
.551 ± .020
Number
0M283V2
0M283V2.5
0M283V3
0M283V4
0M283V5
0M283V5.7
0M283V6
0M283V8
0M283V9
0M283V10
0M283V12
0M283V14
www.callapg.com
Style 0297
713-675-5271
1-800-888-5223
Fluoroelastomer Square
Cord 75 Durometer
Cross Section
Nominal (Inches)
1/8
3/16
1/4
5/16
3/8
3/8 x 1/2
1/2
5/8
3/4
FAX 713-675-2730
FAX 1-800-444-3252
Part
Actual (Inches)
.125 ± .007
.187 ± .009
.250 ± .010
.313 ± .012
.375 ± .012
.375. x .500 ± .018
.500 ± .018
.625 ± .022
.750 ± .025
Cross Section
Number
0297125
0297187
0297250
0297313
0297375
0297375x500
0297500
0297625
0297750
Nominal (Inches)
Cross Section
Nominal (Inches)
Part
Actual (Inches)
.093 ± .005
.103 ± .005
.125 ± .005
.139 ± .007
.187 ± .007
.210 ± .007
.250 ± .008
.275 ± .008
.312 ± .010
.375 ± .010
.437 ± .010
.500 ± .012
.562 ± .012
.625 ± .012
.750 ± .016
1.000 ± .020
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
Cross Section
1/16
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
0285093
0285103
0285125
0285139
0285187
0285210
0285250
0285275
0285312
0285375
0285437
0285500
0285562
0285625
0285750
02851
EPDM (EPR) O-Ring Cord
70 Durometer
Style 0282
Nominal (Inches)
Number
Actual (Inches)
.070 ± .005
.093 ± .005
.103 ± .005
.125 ± .005
.139 ± .007
.187 ± .007
.210 ± .007
.250 ± .008
.275 ± .008
.312 ± .010
.375 ± .010
.437 ± .010
.500 ± .012
.625 ± .012
.750 ± .016
1.000 ± .020
Part
Actual (Inches)
1/16
.070 ± .007
.093 ± .007
.103 ± .007
.125 ± .007
.139 ± .007
.187 ± .007
.210 ± .007
.250 ± .008
.275 ± .008
.312 ± .008
.375 ± .010
.437 ± .012
.500 ± .015
.625 ± .015
.750 ± .020
3/32
1/8
3/16
1/4
Neoprene O-Ring Cord
70 Durometer
Style 0285
Silicone O-Ring Cord
70 Durometer
Style 0286
5/16
3/8
7/16
1/2
5/8
3/4
Cross Section
3/32
1/8
3/16
1/4
5/16
3/8
0286070
0286093
0286103
0286125
0286139
0286187
0286210
0286250
0286275
0286312
0286375
0286437
0286500
0286625
0286750
Aflas® O-Ring Cord
75 Durometer
Style 0281
Nominal (Inches)
Number
Part
Actual (Inches)
Number
.103 – .006/+.012
.139 – .006/+.014
.210 – .006/+.014
.250 – .010/+.022
.275 – .010/+.015
.312 – .010/+.022
.375 – .010/+.022
0281103
0281139
0281210
0281250
0281275
0281312
0281375
Part
Number
0282070
0282093
0282103
0282125
0282139
0282187
0282210
0282250
0282275
0282312
0282375
0282437
0282500
0282625
0282750
02821
Ask about our
vulcanizing capabilities
for O-Ring cord stock
and sectional gaskets!
81
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Extrusions
STYLE 0287
Closed Cell Neoprene Sponge Cord
Closed cell neoprene sponge cord. Black color. Compression deflection - 5.0 to
9.0 PSI. Compression set - 15% to 25%. Water absorption by weight - 5%
maximum. Density (P.C.F.) - 192/400. Temperature resistance: -60°F (low),
150°F (high continuous), 200°F (high intermittent). Used for sealing, gasketing,
insulating, floatation, vibration dampening, and cushioning.
STYLE 0295W
60 Durometer White Neoprene Extrusion
Diameter (inches)
1/8
3/16
1/4
Part Number
0287125
0287187
0287250
5/16
3/8
1/2
0287312
0287375
0287500
5/8
3/4
1
0287625
0287750
02871
Dimensions (inches)
1/2 x 1/2
5/8 x 5/8
Part Number
0295W500
0295W625
Dimensions (inches)
1/2 x 1/2
5/8 x 5/8
1/2 x 3/4
Part Number
0292500
0292625
0292500x750
Dimensions (inches)
5/8 x 7/8
Part Number
0293625x875
Dimensions (inches)
1/2 x 1/2
5/8 x 5/8
5/8 x 7/8
Part Number
0294500
0294625
0294625x875
White neoprene square extrusion. 60 durometer. Resistant to oils and solvents.
Will not darken. Cleans easily with soap and water. Excellent resistance to
weathering. Tensile strength - 800 PSI. Elongation - 500%.
STYLE 0292
60 Durometer EPR Extrusion
EPR square and rectangular extrusion. 60 durometer. Used where temperature
and weather resistance are factors in the application. Excellent resistance to
ozone, oxygen, weather, heat, and many chemicals. Tensile strength - 1700 PSI. Elongation - 400%. Temperature
range: -40°F to 275°F, intermittent to 300°F.
STYLE 0293
70 Durometer Fluoroelastomer Extrusion
70 durometer Viton® extrusion in square and rectangular profiles. A-Type Viton®.
Temperatures up to 500°F for 1000 hours, 400°F for 365+ days. Good chemical
resistance. Tensile strength - 2000 PSI. Elongation 225%. Compression set - 8%.
STYLE 0294
60 Durometer Silicone Extrusion
Silicone square and rectangular extrusion. 60 durometer. Recommended for
applications requiring a wide temperature range and good dry heat resistance.
Tensile strength - 1100 PSI. Elongation - 250%. Compression set - 23%.
Service temperature range: -75°F to 400°F. Gray color.
82
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Related O-Ring Items
Style ORC
O-Ring Measuring Cone and Tape
Unique device for measuring o-rings up to 8” inside diameter. The base of the cone is used
to determine the cross section of the o-ring. Then, for o-rings 1/4” to 3” inside diameter, the
ring is simply dropped over the cone, and the size is read above the o-ring. For o-rings from 3” to
8” inside diameter, the tape is simply expanded inside the o-ring, and the size is read directly from
the tape. All size numbers correspond to industry ARP standard size series.
Style ORCB
Large O-Ring Measuring Cone
Similar to Style ORC, but will measure o-rings up to 5 5/8” inside diameter on the cone.
No tape is included.
Style ORCH
O-Ring Sizing Chart
Laminated flip-chart pictures actual o-ring sizes up to 8” inside diameter. The o-ring is simply
placed on the chart and lined up with the correct inside diameter and cross section. The
tandard size is then read directly from the chart.
Style ORMMT
Measuring Tape for Metric O-Rings
Measures metric 0-rings on one side and standard o-rings on the other. Measures metric orings from 70 mm to 254 mm inside diameter and standard o-rings from 3 1/8” to 10” inside
diameter.
Style ORSG
O-Ring Slide Gauge
Slide gauge for measuring standard O-Rings up to 13” inside diameter.
Style ORID
O-Ring Identifier
Used to verify the material composition of 60-80 durometer O-RIngs that
are known to be either Viton®, Kalrez®, Nitrile, or EPDM. Stainless steel
tubular construction.
Style ORB
Recloseable Plastic Bags
Plain, recloseable plastic bags. Ideal for re-packaging o-rings.
Color
Dimensions
Thickness
Part Number
Clear
Clear
Clear
Clear
Black
Black
Black
4" x 6"
6" x 8"
8" x 10"
10" x 12"
6" x 6"
8" x 8"
12" x 12"
2 mil
2 mil
2 mil
4 mil
3 mil
3 mil
3 mil
ORB2M4x6
ORB2M6x8
ORB2M8x10
ORB4M10x12
ORBB3M6x6
ORBB3M8x8
ORBB3M12x12
83
www.callapg.com
Style ORP
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
O-Ring Picks
Set of two brass picks with two working ends on each pick. Plastic storage pouch is included.
Used to extract o-rings that have been installed. Particularly useful when o-rings have been in
service or when close tolerances are involved.
Style ORL
O-Ring Lubricant
Barium base petroleum grease formulated to facilitate installation and extend service life of synthetic rubber seals. A
film applied to the seal itself as well as surfaces over which the seal will travel is suggested for best results. Combines
excellent surface adherence characteristics and lubricity with inherent water resistance. It is especially
recommended for low pressure pneumatic systems as well as reciprocating and low speed oscillating or rotary
applications. Well suited for most sealing service within a -20° to +300°F temperature range. However, it is
not recommended for use in systems having micronic filters or in contact with seals unsuited for petroleum
oil service such as silicone, butyl, or ethylene propylene rubber. If the conditions exist, use of Style
ORLS (see below) should be considered. (4 ounce tube)
Style ORLS
O-Ring Lubricant (Super)
Silicone lubricant intended to complement Style ORL (above) in that it can be used with virtually any rubber polymer. It
can also be used over a wider temperature range and in most cases will provide better environmental protection to
the elastomer. It is recommended that this lubricant be used sparingly as only a thin film is necessary for best
results. It is useful with a wide variety of fluid media since it is quite inert. High pressure systems as well as
vacuum uses are typical applications where this lubricant is beneficial. It is useful from -65° to +400°F. It is
non-toxic and non irritating under normal conditions. It will not clog 30 micron filters and is unusually
moisture resistant and adheres with unusual tenacity. (2 ounce tube)
Style ORL
Style ORLS
Type
Barium grease
High viscosity silicone fluid
Temperature Range °F
°(C)
-20 to + 180 (1)
(-29 to +82)
-65 to +400(2)
(-54 to +204)
Seal Use
Hydrocarbon fluids
Pneumatic systems
under 200 psi
General purpose
High pressure pneumatic
Suitable For
Use With Rubber
Compounds:
Fluorocarbon
Fluorosilicone
Neoprene
Nitrile
Polyphosphazine
Polyacrylate
Polysulfide
Polyurethane
Fluorocarbon
Fluorosilicone
Neoprene
Nitrile
Polyphosphazine
Polyacrylate
Polysulfide
Polyurethane
Butadiene
Butyl
Ethylene Propylene
Isoprene
SBR (GRS)
Silicone(2)
Will Pass Through
Micronic Filters?
No
Yes
NOTES:
Assembly lubricants should always be used sparingly during application. A light film is all that is required. This is doubly important in cases 1 and 2
below.
1. When a thin film of Style ORL is used for assembly purposes only, the assembly may be subjected to higher temperatures, with limits determined by
the fluid and elastomer being used.
2. Use only a thin film of Style ORLS on silicone rubber if the temperature will exceed 300°F.
84
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
D
B
C
B
D
D
D
A
A
C
E
B
D
D
A
A
A
A
A
D
D
D
E
A
B
E
E
E
E
D
D
B
A
A
A
C
B
B
A
D
B
A
A
A
A
E
A
A
A
A
A
A
A
A
B
B
B
A
C
C
D
C
B
D
E
D
A
D
B
B
B
A
A
C
A
A
E
E
A
E
B
E
A
E
D
D
E
D
D
D
C
D
B
D
D
B
C
B
A
E
D
D
D
D
D
D
C
C
C
D
B
B
B
C
D
D
B
D
A
D
A
B
A
A
A
A
A
D
A
D
A
A
D
B
A
D
A
A
D
B
D
D
D
D
B
D
D
D
D
D
D
A
A
D
D
D
D
D
D
D
D
D
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
A
A
A
A
B
A
A
D
A
D
A
D
A
A
A
A
A
A
A
A
A
B
B
A
A
A
A
A
A
A
A
A
D
D
D
A
A
B
B
C
C
C
C
A
A
C
D
D
D
D
D
D
D
D
D
A
D
B
D
D
D
A
E
E
A
B
D
D
A
A
E
E
A
D
D
D
E
E
B
E
E
E
E
E
D
A
E
B
A
C
B
B
A
C
C
B
B
A
A
E
B
B
A
A
A
A
A
A
URETH
ANE
C
B
D
A
B
C
D
D
B
D
A
D
A
B
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
D
B
A
D
D
D
B
D
B
D
D
D
D
A
A
A
D
B
B
C
C
C
A
B
AFLAS ®
D
A
C
B
C
D
D
D
A
D
A
D
A
B
A
A
A
A
A
B
A
D
D
A
D
A
A
D
A
A
D
B
A
D
D
D
D
B
A
C
D
C
D
A
A
A
B
B
A
A
A
A
A
A
BUTYL
Acetaldehyde
Acetamide
Acetic Acid, Glacial
Acetic Acid, 30%
Acetic Anhydride
Acetone
Acetophenone
Acetyl Chloride
Acetylene
Acrylonitrile
Adipic Acid
Alkazene (Dibromoethyl-benzene)
Alum-NH3-Cr-K (aq)
Aluminum Acetate (aq)
Aluminum Chloride (aq)
Aluminum Fluoride (aq)
Aluminum Nitrate (aq)
Aluminum Phosphate (aq)
Aluminum Sulfate (aq)
Ammonia, Anhydrous
Ammonia Gas (cold)
Ammonia Gas (hot)
Ammonium Carbonate (aq)
Ammonium Chloride (aq)
Ammonium Hydroxide(conc.)
Ammonium Nitrate (aq)
Ammonium Nitrite (aq)
Ammonium Persulfate (aq)
Ammonium Phosphate (aq)
Ammonium Sulfate (aq)
Amyl Acetate(Banana Oil)
Amyl Alcohol
Amyl Borate
Amyl Chloronaphthalene
Amyl Naphthalene
Aniline
Aniline Dyes
Aniline Hydrochloride
Animal Fats
Ansul Ether(Anesthetics)
Aqua Regia
Aroclor, 1248
Aroclor, 1254
Aroclor, 1260
Arsenic Acid
Arsenic Trichloride (aq)
Askarel
Asphalt
ASTM Fuel A
ASTM Fuel B
ASTM Fuel C
ASTM Fuel D
ASTM Oil One
ASTM Oil Two
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals
A
A
B
B
B
A
A
D
A
D
A
D
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
C
A
D
D
D
A
B
B
B
C
D
C
D
A
A
C
D
D
D
D
D
D
D
D
D
B
C
D
D
D
D
D
A
B
D
B
A
A
A
A
A
D
A
A
A
A
A
A
A
A
A
A
A
A
D
A
A
B
B
A
A
A
A
D
B
A
A
A
A
D
A
A
B
D
D
D
A
A
D
D
D
D
D
D
D
D
D
D
E
D
E
D
C
C
C
E
D
D
E
E
D
A
D
E
E
D
E
E
D
D
E
E
D
D
D
D
B
B
E
D
D
D
C
E
D
B
A
B
D
E
A
B
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
85
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
86
A
A
A
A
A
A
A
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
D
A
A
A
A
A
A
D
A
D
A
D
A
A
D
A
A
A
D
D
A
A
A
A
A
A
A
A
B
A
A
C
A
A
A
A
A
A
B
D
D
D
C
E
B
E
D
D
B
B
B
A
A
D
D
D
D
B
D
D
B
D
E
E
B
D
E
D
E
E
E
D
D
D
A
A
A
B
B
B
A
E
B
D
D
D
A
A
A
B
A
A
D
D
D
D
D
D
D
D
D
D
D
B
B
A
A
D
D
D
D
D
D
D
D
D
D
D
A
D
B
D
D
D
D
D
D
D
D
A
A
C
A
B
A
D
B
E
D
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUOR
O
ELAST OMER
ETHYL
PROPY ENE
LEN
(EPR) E
D
A
A
A
A
A
A
A
D
C
D
C
D
A
B
D
D
A
A
A
A
A
D
D
B
D
D
C
D
A
C
A
D
B
B
B
A
A
B
C
D
B
A
A
A
A
A
A
A
A
B
B
B
D
A
A
A
A
A
A
A
C
C
B
A
B
B
B
A
B
B
B
B
B
A
A
B
D
B
A
A
B
A
A
D
B
D
B
D
A
D
D
B
B
B
D
D
A
A
A
B
A
A
A
A
B
A
A
URETH
ANE
B
A
A
A
A
A
B
D
D
B
B
D
D
B
D
D
D
D
A
B
A
A
D
D
D
D
D
D
A
B
D
B
D
A
D
D
C
C
D
D
C
C
B
A
A
A
C
A
A
A
B
B
C
D
AFLAS ®
A
A
A
A
A
A
A
D
D
D
A
C
D
D
D
D
D
D
B
B
A
A
D
D
D
D
A
D
A
A
D
C
D
A
C
D
D
D
D
B
B
D
B
B
A
A
B
A
A
A
C
B
D
C
BUTYL
ASTM Oil Three
Barium Chloride (aq)
Barium Hydroxide (aq)
Barium Sulfate (aq)
Barium Sulfide (aq)
Beer
Beet Sugar Liquors
Benzaldehyde
Benzene
Benzene Sulfonic Acid
Benzine (Ligroin) (Nitrobenzine)
Benzoic Acid
Benzoyl Chloride
Benzyl Alcohol
Benzyl Benzoate
Benzyl Chloride
Biphenyl (Phenylbenzene)
Bleach Solutions
Borax
Bordeaux Mixture
Boric Acid
Brine
Bromine, Anhydrous
Bromine Trifluoride
Bromine Water
Bromobenzene
Bunker Oil
Butadiene
Butane
Butter (Animal Fat)
Butyl Acetate
Butyl Acetyl Ricinoleate
Butyl Acrylate
Butyl Alcohol
Butyl Amine
Butyl Benzoate
Butyl Carbitol
Butyl Cellosolve
Butyl Oleate
Butyl Stearate
Butylene
Butyraldehyde
Calcium Acetate (aq)
Calcium Bisulfite (aq)
Calcium Chloride (aq)
Calcium Hydroxide (aq)
Calcium Hypochlorite(aq)
Calcium Nitrate (aq)
Calcium Sulfide (aq)
Cane Sugar Liquors
Carbamate
Carbitol
Carbolic Acid (Phenol)
Carbon Bisulfide
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
D
A
A
A
A
A
A
A
D
D
D
D
D
A
B
D
D
A
A
A
A
A
D
D
C
D
D
D
D
B
C
A
D
B
C
B
A
A
B
C
D
B
A
D
A
A
A
A
A
A
B
B
B
D
A
A
A
A
A
A
A
B
C
D
B
A
A
A
A
A
D
A
A
A
A
D
E
E
A
D
A
E
B
A
D
A
D
A
B
A
B
E
A
A
A
D
A
A
A
A
A
A
A
A
A
A
A
A
B
A
D
E
A
B
D
D
D
D
B
D
E
D
D
D
D
D
A
D
A
B
D
D
D
D
B
D
A
A
D
D
E
D
D
E
E
D
E
E
D
D
D
C
A
B
D
A
A
D
D
D
C
E
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
A
A
A
A
A
C
D
A
A
A
A
A
D
D
D
A
A
A
A
A
A
D
D
A
A
A
A
A
A
A
A
A
A
D
A
A
A
A
A
A
A
A
A
A
A
D
A
A
A
A
A
A
D
D
B
A
A
D
A
D
D
E
D
D
D
E
D
E
D
D
D
D
D
D
D
D
D
D
B
B
C
A
D
B
A
B
B
D
A
A
A
A
A
D
D
D
D
D
D
D
D
D
B
A
A
A
D
B
B
B
B
D
A
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
A
D
A
D
D
D
D
A
A
B
D
D
D
D
D
D
D
D
D
D
D
D
A
B
B
D
D
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
B
A
A
D
B
B
B
A
C
D
C
C
D
A
A
D
B
D
D
D
D
D
D
D
B
B
C
A
D
A
C
A
D
A
A
A
A
C
B
D
D
D
D
D
C
B
D
D
D
A
A
B
A
A
A
A
B
C
A
D
D
C
B
A
B
B
C
D
D
B
B
B
A
D
B
D
D
B
B
B
C
A
A
A
A
A
B
D
A
A
A
A
A
A
B
B
B
B
A
D
B
A
A
A
A
A
D
D
URETH
ANE
B
A
B
D
A
D
D
D
B
C
C
D
D
D
C
D
D
D
D
D
D
D
D
D
A
D
C
A
B
A
B
B
D
B
B
A
A
C
B
B
C
C
D
C
A
D
D
D
D
A
B
A
D
B
AFLAS ®
A
B
A
C
A
D
D
D
A
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
B
D
D
A
A
A
A
A
D
B
A
A
A
A
A
A
D
D
D
A
C
D
D
D
A
A
A
A
D
D
BUTYL
Carbon Dioxide
Carbonic Acid
Carbon Monoxide
Carbon Tetrachloride
Castor Oil
Cellosolve
Cellosolve Acetate
Cellulube (Fryquel)
China Wood Oil (Tung Oil)
Chlorine (dry)
Chlorine (wet)
Chlorine Dioxide
Chlorine Trifluoride
Chloroacetic Acid
Chloroacetone
Chlorobenzene
Chlorobromomethane
Chlorobutadiene
Chlorododecane
Chloroform
O-Chloronaphthalene
1-Chloro 1-Nitro Ethane
Chlorosulfonic Acid
Chlorotoluene
Chlorox (Sodium Hypochlorite NaOCI)
Chrome Plating Solutions
Chromic Acid
Citric Acid
Coal Tar (Creosote)
Cobalt Chloride (aq)
Coconut Oil
Cod Liver Oil
Coke Oven Gas
Copper Acetate (aq)
Copper Chloride (aq)
Copper Cyanide (aq)
Copper Sulfate (aq)
Corn Oil
Cottonseed Oil
Creosote (coal tar)
Cresol
Cresylic Acid
Cumene
Cyclohexane
Cyclohexanol
Cyclohexanone
P-Cymene
Decalin
Decane
Denatured Alcohol
Detergent Solutions
Developing Fluids
Diacetone
Diacetone Alcohol
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
B
A
A
D
B
B
B
A
C
D
C
C
D
B
B
D
B
D
D
D
D
D
D
D
B
B
C
A
D
A
C
A
D
A
A
A
B
C
C
D
D
D
D
D
D
B
D
D
D
A
A
A
A
A
A
A
A
C
A
A
C
B
A
E
E
E
E
E
D
C
E
C
B
D
E
E
B
D
A
A
E
A
E
A
A
A
A
D
A
B
A
A
A
A
A
A
C
B
A
C
C
B
B
A
A
A
C
C
A
A
A
D
A
D
D
D
C
E
E
D
D
E
D
D
D
D
D
D
D
D
D
D
D
D
E
A
C
E
C
A
D
D
A
A
E
A
A
C
E
D
D
A
E
D
D
E
B
D
D
E
D
D
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
87
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
88
D
B
B
D
C
C
B
A
C
D
A
D
A
D
A
B
A
A
D
D
D
A
D
B
D
B
B
D
D
A
A
A
A
A
D
A
D
D
D
D
C
A
A
D
D
A
A
D
D
A
B
A
A
A
E
C
D
C
D
B
B
D
D
E
D
B
D
D
B
B
D
E
D
D
D
A
B
E
D
C
C
D
D
D
D
C
C
D
D
D
B
B
B
B
A
D
D
D
C
D
D
D
D
E
C
D
D
E
D
D
D
D
D
D
D
D
D
D
D
B
D
D
A
D
D
D
D
D
C
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
B
D
C
D
A
D
A
D
B
D
D
D
D
D
D
A
D
B
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
B
B
D
C
C
B
B
D
C
D
D
B
D
D
A
B
D
D
A
C
B
D
B
B
D
B
B
B
B
D
D
D
D
D
B
D
B
B
B
B
A
D
A
B
B
C
B
B
C
B
C
A
D
A
E
C
B
D
C
C
B
B
C
D
A
D
C
C
A
B
C
B
D
D
D
A
D
B
D
B
C
C
D
C
B
B
B
B
D
B
D
D
D
D
A
A
A
D
D
A
B
D
C
A
E
B
B
A
URETH
ANE
C
D
D
D
C
D
D
D
D
D
C
B
D
C
A
D
D
D
D
D
C
C
C
D
D
D
D
D
D
D
D
D
D
D
D
B
B
C
C
D
A
D
D
D
B
D
D
D
C
B
C
C
D
A
AFLAS ®
D
D
D
D
D
D
D
D
D
C
A
B
D
D
A
B
B
D
D
D
C
A
B
D
D
C
D
D
D
A
D
D
D
C
D
A
B
D
D
D
A
D
D
D
B
A
D
D
C
D
D
D
D
A
BUTYL
Dibenzyl Ether
Dibenzyl Sebecate
Dibromoethyl benzene (Alkazene)
Dibutyl Amine
Dibutyl Ether
Dibutyl Phthalate
Dibutyl Sebecate
O-Dichlorobenzene
Dichloro-Isopropyl Ether
Dicyclohexylamine
Diesel Oil
Diethylamine
Diethyl Benzene
Diethyl Ether
Diethylene Glycol
Diethyl Sebecate
Diisobutylene
Diisopropyl Benzene
Diisopropyl Ketone
Diisopropylidene Acetone
Dimethyl Aniline (Xylidine)
Dimethyl Ether (Methyl Ether)
Dimethyl Formamide
Dimethyl Phthalate
Dinitrotoluene
Dioctyl Phthalate
Dioctyl Sebecate
Dioxane
Dioxolane
Dipentene
Diphenyl (Phenylbenzene)
Diphenyl Oxides
Dowtherm Oil
Dry Cleaning Fluids
Epichlorohydrin
Ethane
Ethanolamine
Ethyl Acetate
Ethyl Acetoacetate
Ethyl Acrylate
Ethyl Alcohol
Ethyl Benzene
Ethyl Benzoate
Ethyl Cellosolve
Ethyl Cellulose
Ethyl Chloride
Ethyl Chlorocarbonate
Ethyl Chloroformate
Ethyl Ether
Ethyl Formate
Ethyl Mercaptan
Ethyl Oxalate
Ethyl Pentachlorobenzene
Ethyl Silicate
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
B
B
D
D
C
C
B
D
D
D
D
B
D
D
A
B
D
D
A
C
C
D
B
B
D
B
B
B
C
D
D
D
D
D
B
D
B
B
B
B
A
D
A
D
B
D
C
C
C
B
D
A
D
A
D
A
D
A
D
B
B
D
D
B
A
B
E
D
A
B
B
E
D
E
E
E
B
B
D
B
B
D
D
C
D
B
E
C
D
A
A
D
D
D
A
D
C
A
A
B
B
B
D
A
B
E
D
A
B
B
D
D
B
C
D
D
B
D
C
C
E
A
D
D
D
E
D
E
E
E
D
E
D
D
B
D
D
D
D
D
E
D
D
C
C
D
D
D
D
D
D
D
B
B
D
D
D
D
E
E
D
E
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
A
B
A
D
A
A
D
A
A
A
A
A
A
E
E
A
E
E
B
A
D
C
A
B
A
D
D
D
D
A
B
B
B
D
D
A
E
B
A
B
B
B
A
A
A
C
A
B
A
A
A
E
D
A
E
D
C
A
D
A
D
D
C
B
C
B
A
E
D
D
E
E
A
D
B
B
D
D
D
D
D
E
E
D
D
D
E
E
E
E
E
E
D
D
E
D
D
C
A
C
D
D
D
D
B
E
D
E
C
D
B
B
D
A
D
D
D
A
A
A
D
D
D
D
A
B
C
C
B
A
D
A
A
D
A
B
A
C
B
A
A
B
A
A
A
A
A
C
A
C
C
D
A
C
C
D
D
D
C
D
D
D
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
B
C
B
A
C
A
C
C
C
A
A
A
D
A
D
D
A
A
A
B
A
A
D
B
A
D
A
A
A
D
C
A
A
B
A
A
A
A
A
D
A
D
B
C
A
B
B
D
D
D
B
C
B
A
A
C
B
D
C
A
D
C
E
A
A
A
A
E
E
B
E
E
B
D
D
C
B
C
D
E
D
E
E
E
D
B
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
A
A
E
E
C
URETH
ANE
C
D
B
A
D
A
D
D
B
A
A
A
D
D
D
D
A
B
B
B
B
A
C
A
A
D
A
B
A
C
A
A
A
A
A
A
A
A
A
B
A
A
B
C
A
B
A
C
C
B
B
D
C
D
AFLAS ®
A
D
D
A
D
A
D
D
B
A
A
A
A
E
D
D
A
E
A
A
C
B
B
A
A
D
D
D
A
B
A
A
A
A
A
A
A
A
A
B
B
A
B
B
A
A
A
A
B
A
A
D
D
D
BUTYL
Ethylene
Ethylene Chloride
Ethylene Chlorohydrin
Ethylene Diamine
Ethylene Dichloride
Ethylene Glycol
Ethylene Oxide
Ethylene Trichloride
Fatty Acids
Ferric Chloride (aq)
Ferric Nitrate (aq)
Ferric Sulfate (aq)
Fish Oil
Fluorinated Cyclic Ethers
Fluorine (liquid)
Fluorobenzene
Fluoroboric Acid
Fluorocarbon Oils
Fluorolube
Fluorosilicic Acid
Formaldehyde (RT)
Formic Acid
Freon 11
Freon 12
Freon 13
Freon 21
Freon 22
Freon 31
Freon 32
Freon 112
Freon 113
Freon 114
Freon 115
Freon 142b
Freon 152a
Freon 218
Freon C316
Freon C318
Freon 13B1
Freon 114B2
Freon 502
Freon TF
Freon T-WD602
Freon TMC
Freon T-P35
Freon TA
Freon TC
Freon MF
Freon BF
Fuel Oil
Fumaric Acid
Furan, Furfuran
Furfural
Fyrquel (Cellulube)
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
B
C
B
A
C
A
C
C
C
A
A
A
D
A
D
D
A
A
A
B
A
A
D
B
A
D
A
A
A
D
D
A
A
A
A
A
A
A
A
D
A
D
B
C
A
B
B
D
D
D
B
D
B
A
E
A
A
A
E
A
D
E
A
A
A
A
E
E
E
E
E
E
B
E
B
E
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
E
E
E
D
D
A
A
E
E
E
E
D
D
D
D
B
D
D
E
A
A
E
E
E
E
E
E
E
E
E
D
E
E
A
E
E
D
E
E
E
A
E
E
E
E
E
E
E
E
E
E
A
E
E
E
E
E
C
E
B
E
E
C
D
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
89
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
90
A
A
A
A
A
A
A
A
A
A
D
A
A
A
D
A
A
A
A
B
A
A
C
D
A
A
B
D
D
B
A
D
E
A
A
D
D
A
A
D
A
D
D
A
A
A
A
D
E
A
A
A
A
B
E
D
A
E
A
A
A
A
A
D
B
D
D
B
C
C
D
D
C
D
C
D
D
D
D
C
B
C
C
E
E
D
E
A
D
D
D
A
D
D
D
D
D
A
B
B
D
D
B
B
D
B
A
C
B
D
A
D
A
B
A
A
B
D
D
D
D
B
A
D
D
D
B
D
B
D
D
D
C
A
D
D
D
D
D
D
D
B
D
D
D
B
D
D
D
D
D
A
D
D
D
D
A
B
D
B
D
D
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
B
D
A
B
A
A
A
A
A
D
A
D
D
C
A
D
A
A
A
C
A
C
D
C
B
A
B
A
A
B
B
D
D
A
D
B
B
A
D
D
D
D
D
A
D
B
D
A
A
A
D
A
A
A
A
A
A
A
A
A
A
A
B
A
D
A
A
B
D
A
C
C
B
C
B
D
D
D
D
C
B
C
C
B
E
D
E
B
A
D
D
B
B
C
A
D
D
A
B
A
B
D
A
A
A
A
A
C
URETH
ANE
B
C
A
B
A
A
A
A
B
D
A
B
B
B
B
B
D
B
B
D
B
D
D
D
B
A
D
B
C
D
D
D
D
A
B
D
D
B
D
C
B
D
D
A
D
B
D
B
A
A
B
B
A
D
AFLAS ®
B
B
A
D
A
A
A
A
B
D
D
A
B
A
B
A
D
D
C
D
B
D
D
D
B
A
D
D
D
C
D
D
E
B
A
D
D
B
D
B
A
D
D
A
D
A
B
B
A
B
A
A
D
D
BUTYL
Gallic Acid
Gasoline
Gelatin
Glauber’s Salt (aq)
Glucose
Glue
Glycerin
Glycols
Green Sulfate Liquor
Halowax Oil
N-Hexaldehyde
Hexane
N-Hexene-1
Hexyl Alcohol
Hydrazine
Hydraulic Oil(Petroleum)
Hydrobromic Acid
Hydrobromic Acid 40%
Hydrochloric Acid (cold) 37%
Hydrochloric Acid (hot) 37%
Hydrocyanic Acid
Hydrofluoric Acid (conc.) cold
Hydrofluoric Acid (conc.) hot
Hydrofluoric Acid -Anhydrous
Hydrofluosilicic Acid
Hydrogen Gas
Hydrogen Peroxide (90%)
Hydrogen Sulfide (wet) cold
Hydrogen Sulfide (wet) hot
Hydroquinone
Hypochlorous Acid
Iodine Pentafluoride
Iodoform
Isobutyl Alcohol
Isooctane
Isophorone
Isopropyl Acetate
Isopropyl Alcohol
Isopropyl Chloride
Isopropyl Ether
Kerosene
Lacquers
Lacquer Solvents
Lactic Acid (cold)
Lactic Acid (hot)
Lard
Lavender Oil
Lead Acetate (aq)
Lead Nitrite (aq)
Lead Sulfamate (aq)
Ligroin (Benzine) (Nitrobenzine)
Lime Bleach
Lime Sulfur
Lindol (Hydraulic fluid)
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
B
D
A
B
A
B
A
A
A
D
B
D
D
C
A
D
A
A
A
C
A
C
D
C
B
A
C
A
A
B
B
D
D
A
D
C
B
A
D
D
D
D
D
A
D
B
D
A
A
A
D
A
A
A
A
C
A
A
A
E
A
A
A
A
D
B
B
A
E
A
A
A
E
E
A
A
C
D
A
A
A
A
B
E
E
D
E
A
B
C
D
A
E
D
A
D
D
A
A
A
A
D
E
A
B
A
A
A
D
B
D
E
D
E
D
D
D
E
B
B
B
D
D
A
D
D
D
D
E
E
E
E
E
A
A
E
E
E
E
D
E
D
B
D
D
D
D
B
A
D
D
E
E
A
E
D
E
E
B
E
E
D
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
B
A
A
A
B
A
A
A
A
D
A
A
A
D
B
D
D
D
D
A
D
D
B
B
B
A
D
E
D
D
B
E
A
A
A
B
D
A
A
E
A
A
A
A
A
A
D
A
A
A
C
A
D
B
B
A
C
D
B
A
E
A
E
E
B
E
E
D
D
D
D
D
A
E
C
D
D
D
D
A
D
E
D
D
E
E
A
B
D
E
B
A
B
A
D
D
D
A
B
D
D
A
A
A
D
B
D
D
D
D
D
D
B
A
B
B
C
B
C
A
A
D
D
C
D
D
A
D
D
D
D
D
D
D
D
D
D
D
D
C
A
D
D
D
B
D
B
B
D
D
D
A
D
D
D
A
B
A
D
D
D
D
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
D
C
D
D
A
A
A
A
B
B
B
A
A
B
D
A
B
B
A
D
A
B
C
D
C
D
A
B
B
C
B
B
A
C
D
B
A
D
A
A
D
D
D
D
B
B
A
A
A
A
D
B
D
A
E
A
C
A
A
A
E
A
E
E
A
E
E
D
B
D
D
D
A
A
D
D
B
B
B
A
D
E
D
D
B
E
A
A
B
E
D
A
E
E
B
A
A
C
A
B
D
A
A
A
C
B
D
D
URETH
ANE
D
B
B
B
B
A
A
A
C
C
C
A
A
D
B
B
B
B
A
D
D
C
D
D
D
C
C
B
D
D
D
D
A
B
D
D
D
C
B
A
C
D
D
A
D
D
B
A
A
A
D
B
D
D
AFLAS ®
B
A
A
A
B
A
B
A
D
D
A
A
A
D
A
D
D
D
A
B
D
C
D
D
D
A
D
D
D
D
D
D
A
A
D
D
D
A
A
E
B
D
B
A
A
D
B
A
A
A
D
D
D
D
BUTYL
Linoleic Acid
Linseed Oil
Liquefied Petroleum Gas
Lubricating Oils(petroleum)
Lye
Magnesium Chloride (aq)
Magnesium Hydroxide (aq)
Magnesium Sulfate (aq)
Maleic Acid
Maleic Anhydride
Malic Acid
Mercury Chloride (aq)
Mercury
Mesityl Oxide
Methane
Methyl Acetate
Methyl Acrylate
Methylacrylic Acid
Methyl Alcohol
Methyl Bromide
Methyl Butyl Ketone
Methyl Cellosolve
Methyl Chloride
Methyl Cyclopentane
Methylene Chloride
Methyl Ether
Methyl Ethyl Ketone
Methyl Formate
Methyl Isobutyl Ketone
Methyl Methacrylate
Methyl Oleate
Methyl Salicylate
Milk
Mineral Oil
Monochlorobenzene
Monomethyl Aniline
Monoethanol Amine
Monomethyl Ether
Monovinyl Acetylene
Mustard Gas
Naphtha
Naphthalene
Naphthalenic Acid
Natural Gas
Neats Foot Oil
Neville Acid
Nickel Acetate (aq)
Nickel Chloride (aq)
Nickel Sulfate (aq)
Niter Cake
Nitric Acid (conc.)
Nitric Acid (dilute)
Nitric Acid - Red Fuming
Nitrobenzene
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
D
C
D
D
A
A
A
A
B
B
B
A
A
B
D
A
B
B
A
D
A
B
C
D
D
D
B
B
C
D
B
B
A
C
D
B
B
D
B
A
D
D
D
D
B
B
A
A
A
A
D
B
D
A
A
A
C
A
A
A
A
A
A
A
A
A
A
C
B
D
E
E
A
A
C
E
E
B
E
C
D
E
D
E
A
E
A
A
D
E
A
E
A
E
B
C
B
A
A
A
D
A
A
A
B
E
C
E
E
B
A
B
D
A
D
E
E
E
E
E
E
D
C
D
D
D
D
E
D
D
D
D
D
E
D
E
D
E
E
E
D
A
D
D
D
E
E
E
B
B
E
B
A
E
D
C
C
A
D
D
E
D
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
91
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
92
A
D
A
D
D
A
A
A
A
B
A
A
A
A
A
B
A
B
A
A
A
A
A
B
A
A
D
A
D
A
A
A
B
A
A
A
D
A
A
E
D
A
A
A
A
D
A
A
A
A
D
D
D
A
D
D
A
D
D
D
D
D
B
D
D
C
D
B
A
B
A
D
D
A
D
D
B
D
D
D
D
E
D
B
C
E
D
D
D
D
D
D
D
E
D
A
A
A
A
C
A
A
B
D
D
D
C
A
D
B
A
D
B
D
D
D
B
D
D
D
D
B
B
D
D
D
B
D
D
D
D
D
E
D
D
B
D
B
C
D
D
B
D
D
D
D
D
D
D
A
A
A
B
B
A
A
D
D
D
D
D
A
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
D
B
A
C
B
D
D
D
C
D
D
B
D
A
A
C
A
D
B
C
B
D
D
D
B
D
D
B
C
A
A
A
C
B
D
D
A
A
A
A
A
A
A
A
A
A
A
A
D
D
B
B
A
A
A
D
A
D
D
B
A
B
B
E
B
A
B
A
A
D
B
B
A
A
A
B
B
D
A
B
D
E
D
B
B
A
D
B
B
A
D
E
E
E
D
A
A
A
A
C
A
A
B
B
D
D
D
A
URETH
ANE
B
C
A
D
B
D
B
B
A
C
C
B
D
B
A
D
C
D
B
C
B
D
B
B
C
D
D
D
D
B
B
D
D
A
C
D
D
D
D
B
B
A
A
A
A
B
A
A
B
B
D
D
D
A
AFLAS ®
A
D
A
D
D
D
A
B
B
C
B
A
D
B
B
D
D
D
A
A
D
B
A
D
D
D
D
D
D
B
D
D
D
B
B
A
D
E
A
E
B
A
A
A
A
B
A
A
A
A
D
D
D
A
BUTYL
Nitrobenzene (ligroin)
Nitroethane
Nitrogen
Nitrogen Tetroxide
Nitromethane
Octachlorotoluene
Octadecane
N-Octane
Octyl Alcohol
Oleic Acid
Oleum Spirits
Olive Oil
O-Dichlorobenzene
Oxalic Acid
Oxygen - Cold
Oxygen - (200-400°F)
Ozone
Paint Thinner, Duco
Palmitic Acid
Peanut Oil
Perchloric Acid
Perchloroethylene
Petroleum - below 250°F
Petroleum - above 250°F
Phenol (Carbolic Acid)
Phenylbenzene (Biphenyl)
Phenyl Ethyl Ether
Phenyl Hydrazine
Phorone(Diisopropylidene Acetone)
Phosphoric Acid - 20%
Phosphoric Acid - 45%
Phosphorus Trichloride
Pickling Solution
Picric Acid
Pinene
Pine Oil
Piperidine
Plating Solution -Chrome
Plating Solution - Others
Polyvinyl Acetate Emulsion
Potassium Acetate (aq)
Potassium Chloride (aq)
Potassium Cupro Cyanide (aq)
Potassium Cyanide (aq)
Potassium Dichromate(aq)
Potassium Hydroxide (aq)
Potassium Nitrate (aq)
Potassium Sulfate (aq)
Producer Gas
Propane
i-Propyl Acetate
n-Propyl Acetate
Propyl Acetone (Methyl Butyl Ketone)
Propyl Alcohol
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
D
B
A
C
B
D
D
D
C
D
D
B
D
A
A
B
D
D
B
C
B
D
D
D
B
D
D
B
C
B
B
A
C
B
D
D
D
A
A
A
A
A
A
A
A
A
A
A
D
D
B
B
A
A
E
E
A
E
E
C
B
B
A
A
A
A
D
A
A
E
A
B
A
A
A
E
A
B
E
D
D
A
D
A
A
A
B
A
A
A
E
E
E
E
E
A
A
A
A
A
A
A
A
A
D
D
C
A
D
D
A
D
D
D
A
D
D
B
C
A
D
E
A
D
A
D
A
B
D
D
B
D
D
D
D
E
D
D
D
E
D
E
B
E
D
E
E
E
D
A
A
A
B
D
A
A
A
C
D
E
D
D
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
D
A
D
A
A
A
A
A
D
D
D
D
A
A
A
A
A
A
A
A
A
A
A
A
D
B
A
A
D
A
A
A
A
A
B
A
A
E
A
A
A
A
A
A
A
A
A
D
D
E
A
B
A
A
D
D
D
D
A
D
D
D
D
E
B
C
D
D
D
D
B
E
A
B
D
C
C
A
C
C
A
A
D
A
A
A
A
A
B
B
E
D
B
D
D
E
A
A
A
B
B
C
D
B
D
D
A
D
D
D
D
D
D
D
D
D
D
D
C
C
D
D
D
D
A
B
A
B
D
A
A
A
D
D
A
A
D
A
B
A
A
A
A
D
A
A
B
B
A
A
B
B
D
A
A
D
D
B
D
D
A
B
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
B
D
B
A
A
A
D
D
B
B
C
B
A
D
D
D
A
A
A
B
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
C
A
A
A
C
B
D
D
A
B
D
B
D
D
A
C
D
A
D
D
C
D
A
A
A
A
A
A
A
A
A
A
A
A
C
C
A
A
D
A
A
A
A
A
B
B
A
E
A
A
E
E
A
A
A
A
A
D
D
E
A
C
A
B
URETH
ANE
D
D
D
D
D
D
D
B
D
B
D
B
B
B
B
B
A
A
B
B
A
A
A
A
D
D
B
A
B
A
A
A
A
A
A
A
B
B
B
B
B
A
A
A
B
B
A
C
D
B
B
D
B
B
AFLAS ®
D
D
D
D
D
D
D
A
D
D
D
C
B
A
A
A
A
B
A
A
B
A
A
B
D
D
A
A
B
A
A
A
A
A
B
B
A
B
B
B
A
A
A
B
A
A
A
D
D
B
A
D
A
B
BUTYL
Propyl Nitrate
Propylene
Propylene Oxide
Pydraul, 10E, 29 ELT
Pydraul, 30E, 50E, 65E, 90E
Pydraul, 115E
Pydraul, 230E, 312C, 540C
Pyranol, Transformer Oil
Pyridine
Pyroligeneous Acid
Pyrrole
Radiation
Rapeseed Oil
Red Oil (MIL-H-5606)
RJ-1 (MIL-F-25558 B)
RP-1 (MIL-F-25576 C)
Sal Ammoniac
Salicylic Acid
Salt Water
Sewage
Silicate Esters
Silicone Greases
Silicone Oils
Silver Nitrate
Skydrol 500
Skydrol 7000
Soap Solutions
Soda Ash
Sodium Acetate (aq)
Sodium Bicarbonate (aq) (Baking Soda)
Sodium Bisulfite (aq)
Sodium Borate (aq)
Sodium Chloride (aq)
Sodium Cyanide (aq)
Sodium Hydroxide (aq)
Sodium Hypochlorite (aq) (Chlorox)
Sodium Metaphosphate(aq)
Sodium Nitrate (aq)
Sodium Perborate (aq)
Sodium Peroxide (aq)
Sodium Phosphate (aq)
Sodium Silicate (aq)
Sodium Sulfate (aq)
Sodium Thiosulfate (aq)
Soybean Oil
Stannic Chloride (aq)
Stannous Chloride (aq)
Steam, under 300°F
Steam, over 300°F
Stearic Acid
Stoddard Solvent
Styrene
Sucrose Solution
Sulfite Liquors
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
B
D
B
A
A
A
D
D
B
B
D
D
A
D
D
D
A
A
A
B
D
A
A
A
B
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
C
A
A
B
D
B
D
D
A
B
E
A
D
A
A
A
A
A
E
E
E
A
A
A
A
A
A
A
A
A
A
A
A
A
B
A
A
A
D
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
E
A
E
E
D
D
D
D
D
D
B
E
D
E
D
B
A
A
A
A
E
B
D
A
A
A
A
D
E
D
E
C
E
E
E
A
E
B
D
E
E
E
D
A
E
A
A
E
E
E
D
D
E
A
E
D
E
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
93
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
94
A
A
A
A
A
A
A
A
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
D
A
B
A
A
D
A
A
D
A
A
A
D
C
A
A
A
D
B
A
B
B
A
A
A
D
A
A
A
A
C
C
B
B
B
B
B
D
D
D
D
B
B
A
E
B
E
D
D
D
E
D
E
D
D
E
D
D
D
B
B
E
C
E
D
D
E
D
D
C
E
E
E
E
C
D
D
D
D
D
B
C
A
D
D
B
D
D
D
B
C
D
D
B
B
D
D
D
B
B
D
D
D
B
D
D
D
D
D
D
D
D
D
D
B
D
B
D
D
B
D
D
A
B
D
D
D
D
D
D
D
A
D
D
A
B
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
A
D
A
A
A
A
B
B
C
D
B
A
C
B
C
B
B
D
D
D
A
D
D
B
D
C
D
D
B
D
D
A
A
A
D
B
B
D
D
A
A
C
C
D
A
C
D
D
A
D
C
A
A
A
A
B
B
B
B
B
C
D
D
E
E
A
A
A
B
A
E
B
B
A
B
B
D
A
E
B
B
D
A
A
D
B
B
C
D
D
B
B
B
D
E
E
B
B
B
B
B
D
B
A
A
C
URETH
ANE
A
C
D
B
D
A
D
B
D
D
B
A
C
B
D
B
B
D
D
D
B
D
B
D
D
D
D
D
D
B
B
B
D
D
D
D
D
D
D
C
A
D
D
B
D
B
D
D
B
D
C
A
B
AFLAS ®
D
C
D
D
D
B
D
C
D
D
B
A
B
A
B
B
D
D
D
D
B
D
B
D
D
D
B
D
D
A
A
B
D
D
D
D
B
D
D
D
B
D
D
D
D
A
B
A
B
B
A
A
B
BUTYL
Sulfur
Sulfur Chloride (aq)
Sulfur Dioxide (Dry)
Sulfur Dioxide (Wet)
Sulfur Dioxide (liquified under pressure)
Sulfur Hexafluoride
Sulfur Trioxide
Sulfuric Acid (dilute)
Sulfuric Acid (conc.)
Sulfuric Acid (20% Oleum)
Sulfurous Acid
Tannic Acid
Tar, Bituminous
Tartaric Acid
Terpineol
Tertiary Butyl Alcohol
Tertiary Butyl Catechol
Tertiary Butyl Mercaptan
Tetrabromoethane
Tetrabromomethane
Tetrabutyl Titanate
Tetrachloroethylene
Tetraethyl Lead
Tetrahydrofuran
Tetralin
Thionyl Chloride
Titanium Tetrachloride
Toluene
Toluene Diisocyanate
Transformer Oil
Transmission Fluid Type A
Triacetin
Triaryl Phosphate
Tributoxy EthyL Phosphate
Tributyl Mercaptan
Tributyl Phosphate
Trichloroacetic Acid
Trichloroethane
Trichloroethylene
Tricresyl Phosphate
Triethanol Amine
Triethyl Aluminum
Triethyl Borane
Trinitrotoluene
Trioctyl Phosphate
Tung Oil (China Wood Oil)
Turbine Oil
Turpentine
Unsymmetrical Dimethyl Hydrazine (UDMH)
Varnish
Vegetable Oils
Versilube F-50
Vinegar
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
A
D
B
A
B
A
B
B
D
D
B
A
C
B
C
B
B
D
D
D
B
D
D
C
D
D
D
D
B
D
D
A
A
A
D
B
B
D
D
A
B
C
C
D
A
C
D
D
A
D
C
A
A
A
A
E
E
E
C
A
A
A
E
A
A
A
A
A
A
A
E
E
E
A
E
E
D
E
E
E
C
D
A
A
E
A
A
E
E
C
E
E
A
A
E
E
E
A
A
A
A
E
E
A
A
A
E
E
E
E
E
E
E
D
D
D
C
E
E
A
B
D
D
D
E
E
E
D
E
C
E
E
D
D
E
A
A
D
D
D
E
D
D
D
D
D
D
E
E
E
D
C
A
D
E
C
E
A
D
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes:
(1)
(2)
A
D
A
A
A
A
A
A
D
A
D
A
A
E
C
A
A
D
D
D
D
D
E
D
A
A
D
A
A
A
D
D
D
D
C
A
D
A
B
FLUOR
SILICO ONE
STYR
BUTADENE
IEN
(SBR) E
SILICO
NE
FLUO
ELAST ROOMER
ETHYL
PROPY ENE
LEN
(EPR) E
D
A
A
A
D
D
D
D
B
A
A
A
A
E
D
A
A
A
A
B
A
D
A
D
A
A
URETH
ANE
D
B
A
A
D
B
B
D
C
A
B
A
A
AFLAS ®
D
C
A
A
B
A
A
D
C
A
B
A
A
BUTYL
Vinyl Chloride
Wagner 21B Brake Fluid
Water
Whiskey, Wines
White Pine Oil
White Oil
Wood Oil
Xylene
Xylidine (Di-methyl Aniline)
Zeolites
Zinc Acetate (aq)
Zinc Chloride (aq)
Zinc Sulfate (aq)
CHLOR
O
PRENE -
NITRIL
E
Compound Selection for Fluids and Chemicals (Continued)
D
B
A
A
D
D
D
D
C
A
A
A
A
E
A
A
A
A
A
A
B
E
A
D
A
A
E
E
D
D
E
A
C
D
E
E
D
E
E
A. SATISFACTORY B. FAIR C. SEVERE EFFECT – EXCEPT FOR SOME STATIC APPLICATIONS D. UNSATISFACTORY E. INSUFFICIENT INFORMATION
Temperature, concentrations, impurities, and other chemicals present can effect the chemical resistance of an elastomer. It is not possible to test in all chemicals and therefore some
chemical resistance indicators are based on the manufacturer’s best estimates known about various classes and the composition of the elastomer. Therefore, manufacturers do not
certify results from a performance standpoint but state they should be used only as indicators of chemical resistance. APG assumes no responsibility whatsoever.
The information contained in these tables was derived from several sources and is to be used as a general guide only. Compounds suitable for any specific application rests solely by
the end user. APG assumes no responsibility whatsoever.
Age Controls
Because of short shelf life of very early Neoprene and/or
Neoprene/Nitrile blends, the Government imposed an Age
Control Program known as ANA Bulletin 438C on Military
O-Rings. Its step-by-step schedule allowed the
manufacturer (or his agent) four quarters beyond the part
curing date to deliver it to the component builder. They had
two more quarters to install the oldest part in their
equipment. These components then had a maximum of 12
quarters (3 years) until delivery of the aircraft to the
Government. This applied only to Nitrile Compounds.
Those of other polymers were not covered.
As a result of long-term evaluations of stored O-Rings by a
number of Air Force, Army, and Navy laboratories and a
long-term study by the O-Ring industries laboratories and
investigations of long stored and long lost crashed aircraft
hydraulic systems, it is concluded that modern Nitrile
Compounds are safe to use 5 to 10 years (varying on who
makes the conclusion) after the date of the manufacture.
Further information may be found in Air Force Technical
Report AFML-TR-67-235, if desired.
MIL-STD-1523A dated Feb. 1, 1984 replaced MIL-STD1523 and now allows the manufacturer of the O-Ring or his
agent a full 40 quarters (10 years) to deliver his product to
the procuring activity or contracting officer. MIL-STD1523A does not control the age beyond this point for ORings although it is still very restrictive for hose which is
also covered. Military Material specifications covered by
MIL-STD-1523 include: MIL-P-5315, MIL-P-5510, MIL-P5516, MIL-S-6855CI.I, MIL-R-7362, MIL-P-25732, MIL-P83461.
Age Resistance of Elastomers
Although when properly stored, elastomers have been
known to shelf age for very long periods of time, the
following chart indicates the generally accepted age
resistance for various elastomers (from MIL-HDBK-695):
5 to 10 years
Nitrile
SBR
Urethane (Polyester)
Hypalon
Butyl
Chloroprene
Ethylene Propylene
Epichlorohydrin
Urethane (Polyether)
HSN- Not listed in MIL-HDBK-695
(Data to date indicates shelf
life of 5 to 10 years)
Up to 20 Years
Silicone
Fluorosilicone
Fluoroelastomer
Polyacrylate
Polysulfide
Aflas® - Not listed in MIL-HDBK-695
(Data to date indicates shelf
life of up to 20 years)
Suggested proper storage conditions
O-Rings should be stored in clean, dry, containers away
from ozone, contaminates, sunlight, radiation at a
temperature not to exceed 120°F.
95
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Fastener Seals and Thread Seals
Fastener Seals
Fastener seals are one-piece, molded-in-place seals with the
rubber sealing element mechanically locked to the metal
retainer. They are designed to seal beneath the head of the
fastener for both internal and external pressure systems.
The principle of controlled confinement is utilized in the design of fastener seals. As the fastener is
tightened, the rubber seal is compressed, forcing the sealing surfaces securely around the fastener
shank - but without squeezing the rubber beyond its elastic limit, or destroying its inherent memory.
With fastener seals, there is full metal-to-metal contact at the joining surfaces.
Faster seals provide self-centering for the seal, vacuum sealing, high-pressure sealing, long service,
easy installation, moderate torquing, no retorquing, and quick visual inspection.
The 600-Series fastener seals at APG are 70 durometer nitrile and commercial CAD plated steel, or
70 durometer silicone and commercial CAD plated steel. They are available in standard sizes for
bolts and screws as listed below.
SIZE
DASH
NUMBER
-6
-8
-10
-10 O.S.
-1⁄4
-1⁄4 O.S.
-5⁄16
PART NUMBER
Nitrile
Silicone
RUBBER
I.D.
METAL
O.D.
METAL
RUBBER
THICKNESS THICKNESS
AFS600-0101-6
*
*
*
AFS600-0101-10
*
AFS600-0101-10OS
*
AFS600-0101-1⁄4
AFS600-6230-1⁄4
AFS600-0101-1⁄4 O.S.
*
.138
.164
.190
.190
.250
.250
.130
.156
.180
.186
.240
.245
.385
.385
.443
.468
.505
.531
.040
.040
.050
.050
.050
.050
.050
.050
.072
.072
.072
.072
-3⁄8
-7⁄16
-1⁄2
-9⁄16
-5⁄8
-3⁄4
-7⁄8
AFS600-0101-5⁄16
AFS600-0101-3⁄8
AFS600-0101-7⁄16
AFS600-0101-1⁄2
AFS600-0101-9⁄16
AFS600-0101-5⁄8
AFS600-0101-3⁄4
AFS600-0101-7⁄8
*
AFS600-6230-3⁄8
*
*
*
*
.312
.375
.438
.500
.562
.625
.301
.364
.427
.490
.552
.615
.603
.666
.760
.880
1.067
1.193
.050
.050
.050
.050
.050
.050
.072
.072
.072
.072
.072
.072
-1
AFS600-0101-1
*
*
*
.750
.875
1.000
.740
.864
.988
1.322
1.510
1.760
.064
.064
.064
.096
.096
.096
* Not currently an APG stock item. Call for availability.
96
THREAD
MAJOR
DIAMETER
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Thread Seals
Like fastener seals, thread seals are one-piece molded-in-place seals
with the rubber sealing element mechanically locked to the metal
retainer. They are designed to seal beneath the nut of the fastener and seal directly against the threads
of the fastener. This design allows thread seals to block the spiral passage created by the threads that
might permit the fluid to wind its way through the helix. When the thread seal is compressed between
the nut and the mating surface, the squeeze on the crown causes the inside of the seal to bulge inward
and hug the crest of the thread. This blocks the axial outside leak path. The thread seal also has three
wedge-shaped protrusions inside the cylinder hole. Since all standard screw threads have only a
single V-shaped spiral channel, one of these wedges will always be in a position to block the flow of
fluid through this channel.
Thread seals are self-centering and non-directional. Their low cost can provide considerable savings
because they make possible the use of low cost standard fasteners and full threaded fittings. No
special tools or skills are needed for assembly.
The 7500-Series thread seals at APG are 70 durometer nitrile and commercial CAD plated steel, or
70 durometer fluoroelastomer and commercial CAD plated steel. They are available in standard sizes
for bolts and screws as listed below.
Size
Dash
Number
Nitrile
Fluoroelastomer
–6
*
*
.406
–8
*
*
.406
.051
–10
ATS7500-10
*
.469
.051
–1⁄4
ATS7500-1⁄4
*
.562
.051
5
– ⁄16
ATS7500-5⁄16
*
.687
.064
–3⁄8
ATS7500-3⁄8
ATS7500-3⁄8 VT
.750
.064
–7⁄16
*
*
.906
.078
–1⁄2
ATS7500-1⁄2
*
1.000
.078
9
– ⁄16
*
*
1.094
.094
–5⁄8
ATS7500-5⁄8
ATS7500-5⁄8 VT
1.187
.094
–3⁄4
ATS7500-3⁄4
*
1.375
.109
–7⁄8
–1
ATS7500-7⁄8
*
1.562
.109
ATS7500-1
*
1.750
.120
Part Number
Metal
O.D.
Metal
Thickness
.051
* Not currently an APG stock item. Call for availability.
97
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Glossary
DEVELOPED BY THE O-RING DIVISION OF THE RUBBER MANUFACTURING ASSOCIATION, INC.
ABRASION
Progressive wearing away of material.
AMBIENT TEMPERATURE
The environment temperature surrounding the object under
consideration.
ABRASION RESISTANCE
The ability of a rubber Compound to resist mechanical wear.
ACCELERATED LIFE TEST
Any set of conditions designed to reproduce in a short time the
deteriorating effect obtained under normal service conditions.
ACCELERATED SERVICE TEST
A service or bench test in which some service condition, such as
speed, or temperature, or continuity of operation, is exaggerated
in order to obtain a result in shorter time.
ACID RESISTANT
Withstands the action of acids.
ATMOSPHERIC CRACKING
Cracks produced in surface of rubber articles by exposure to
atmospheric conditions.
AVERAGE MODULUS
Total change of stress divided by total change of strain, i.e., the
average slope of the stress-strain curve. Employed when
modulus varies from point to point.
BACK RIND
A burn-back into the part at a mold line separation caused by too
soft a rubber stock, excessive acceleration, or too low a
plasticity.
ADHERE
To cling or stick together.
ADHESION
Susceptibility of rubber to stick to a contact surface.
BACK-UP RING
Washer-like device installed next to O-Ring to prevent extrusion.
AFTER CURE
Continuation of vulcanization after the desired cure is effected
and the heat source removed.
AGING
To undergo changes in physical properties with age or lapse of
time
AGING, AIR OVEN
A means of accelerating the change in physical properties of
rubber Compounds by exposing them to the action of air at an
elevated temperature.
AGING, AIR PRESSURE HEAT
A means of accelerating the change in physical properties of
rubber Compounds by exposing them to the action of air under
pressure at an elevated temperature.
AGING, OXYGEN BOMB
A means of accelerating the change in physical properties of
rubber Compounds by exposing them to the action of oxygen at
an elevated temperature and pressure.
AIR BOMB
Similar to an oxygen bomb but used with air.
accelerated aging test.
ANILINE NO. OF OIL
Temperature at which a given amount of aniline reacts with a
particular oil. The aniline point generally affects the swell.
Used for
BENCH TEST
A modified service test in which the service conditions are
approximated, but the equipment is conventional laboratory
equipment and not necessarily identical with that in which the
product will be employed.
BENDING MODULUS
Force required to induce bending around a given radius, and
hence a measure of stiffness.
BLEEDING
Migration to the surface of plasticizers, waxes, or similar
materials to form a film or beads.
BLEMISH
A mark, deformity, or injury which impairs the appearance.
BLISTERS
A raised spot on the surface or a separation between layers
usually forming a void or air-filled space in the vulcanized article.
BLOOM
A discoloration or change in appearance of the surface of a
rubber product caused by the migration of a liquid or solid to the
surface. Examples: sulfur bloom, wax bloom. Not to be confused
with dust on the surface from external sources.
AIR CHECKS
Surface markings or depressions due to trapping air between
the materials being cured and the mold or press surface.
BREAK
A separation or discontinuity in any part of an article.
AIR CURING
The vulcanization of a rubber product in air as distinguished from
vulcanizing in a press or steam vulcanizer.
BREAKOUT
Force to inaugurate sliding. Expressed in same terms as friction.
An excessive breakout value is taken as an indication of the
development of adhesion.
98
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
BRITTLENESS
Tendency to crack when subjected to deformation.
BUNA N
A general term for the copolymers of butadiene and acrylonitrile.
Typical commercial polymers are Hycar and Paracril.
BUNA S
A general term for the copolymers of butadiene and styrene.
BUTT JOINT
Joining two ends of material whereby the junction is
perpendicular to the ID of an O-Ring.
BUTYL
A synthetic rubber of the polybutene type exhibiting very low
permeability to gases.
COEFFICIENT OF THERMAL EXPANSION
Average expansion per degree over a stated temperature range,
expressed in a fraction of initial dimension. May be linear or
volumetric.
COLD FLEXIBILITY
Flexibility following exposure to a
temperature for a predetermined time.
predetermined
low
COLD FLOW
Continued deformation under stress.
COLD RESISTANT
Withstands the effect of cold or low temperatures without loss of
serviceability.
COMMERCIALLY SMOOTH
Degree of smoothness of the surface of an article which is
acceptable for use.
COMPOUND
A term applied to either vulcanized or unvulcanized mixtures of
elastomers and other ingredients necessary to make a useful
rubber-like material.
COMPRESSION MODULUS
The ratio of the compressive stress to the resulting compressive
strain (the latter expressed as a fraction of the original height or
thickness in the direction of the force). Compression Modulus
may be either static or dynamic.
COMPRESSION SET
The decrease in thickness of a rubber specimen which has been
deformed under specific conditions of load, time and
temperature.
CONDUCTIVE
A rubber having qualities of conducting or transmitting heat or
electricity. Most generally applied to rubber products used to
conduct static electricity.
CONDUCTIVITY
Quality or power of conducting or transmitting heat or electricity.
COPOLYMER
A polymer consisting of two different monomers chemically
combined.
CORROSION (PACKING)
Corrosion of rigid member (usually metal) where it contacts
packing. The actual corroding agent is fluid medium trapped in
the interface.
CORROSIVE (PACKING)
A property of packing whereby it is assumed, often incorrectly, to
promote corrosion of the rigid member by the trapped fluid.
CRACKING
A sharp break or fissure in the surface.
excessive strain.
Generally due to
CROSS-SECTION
An O-Ring as viewed if cut at right angles to the axis showing
internal structure.
CURING DATE
O-Ring molding date.
CURING TEMPERATURE
The temperature at which the rubber product is vulcanized.
CYLINDER
Chamber in which piston, plunger, ram, rod, or shaft is driven by
or against the pressure medium.
DUROMETER
An instrument for measuring the hardness of rubber. Measures
the resistance to the penetration of an indentor point into the
surface of rubber.
DYNAMIC
O-Ring application in which the O-Ring is subject to movement
or moving parts.
DYNAMIC PACKING
A packing employed in a joint whose members are in relative
motion.
DYNAMIC SEAL
A seal required to prevent leakage past parts which are in
relative motion.
ELASTICITY
The property of an article which tends to return to its original
shape after deformation.
ELASTIC LIMIT
The greatest stress which a material is capable of developing
without a permanent deformation remaining upon complete
release of the stress. In rubber, the elastic limit as above defined
is very low and sometimes practically non-existent. Usually this
term is replaced by various load limits for specific cases in which
the resulting permanent deformations are not zero but are
negligible.
ELASTOMER
A general term for elastic, rubber-like substances.
ELONGATION
Increase in length expressed numerically as a fraction or
percentage of initial length.
99
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
EXTRUSION
Distortion, under pressure, of portion of seal into clearance
between mating metal parts.
HYPALON
Commercial name
polyethylene.
FILLER
Chemically inert, finely divided material added to the polymer to
aid in processing and improving properties of abrasion
resistance and strength - gives it varying degrees of hardness.
IDENTIFICATION
Colored dots or stripes on O-Rings for identification purposes.
FLASH
Excess rubber left around rubber part after molding due to space
between mating mold surfaces; removed by trimming.
FLEX CRACKING
A surface cracking induced by repeated bending or flexing.
FLEX LIFE
The relative ability of a rubber article to withstand dynamic
bending stresses.
FLOCK
Fibers added to rubber Compounds.
FLOW CRACKS
Surface imperfections due to improper flow and failure of stock to
knit or blend with itself during the molding operation.
FRICTION
Resistance to motion due to the contact of surfaces.
FRICTION, BREAKOUT
Initial or starting friction developed when employed as a dynamic
seal.
FRICTION, RUNNING
Constant friction developed during operation of a dynamic ORing
FUEL, AROMATIC
Fuel which contains benzene or aromatic hydrocarbons.
FUEL, NON-AROMATIC
Fuel which is composed of straight chain hydrocarbons.
GLAND
Seal assembly, including O-Ring, groove which holds the ORing, and contacting surfaces.
HARDNESS
Property or extent of being hard. Measured by extent of failure of
the indentor point or any one of a number of standard hardness
testing instruments to penetrate the product.
HARDNESS SHORE A
Durometer reading in degrees of the hardness of the rubber.
(Shore A hardness of 35 is soft; 90 is hard.)
HOMOGENEOUS
General - a material of uniform composition throughout.
HYCAR P.A.
Commercial name for polymer or acrylic acid ester.
100
for
chlorosulphonated
derivative
of
IMMEDIATE SET
The deformation found by measurement immediately after
removal of the load causing the deformation.
IMMERSION
Placing an article into a fluid, generally so it is completely
covered.
IMPACT
The single instantaneous stroke or contact of a moving body with
another either moving or at rest, such as a large lump of material
dropping on a conveyor belt.
LIFE TEST
A laboratory procedure used to determine the amount and
duration of resistance of a rubber article to a specific set of
destructive forces or conditions.
LINEAR EXPANSION
Expansion in any one linear dimension or the average of all
linear dimensions.
LOGY
Sluggish, low snap or recovery of a material.
LOW TEMPERATURE FLEXIBILITY
The ability of a rubber product to be flexed, bent or bowed at low
temperatures.
LOW TEMPERATURE FLEXING
Act or instance of repeated bending or bowing a rubber product
under conditions of low temperature.
MIRROR FINISH
A bright, polished surface.
MISALIGNMENT
Departure from alignment.
MISMATCH
Poor matching or meeting in splice.
MODULUS
Tensile stress at a specified elongation.
MODULUS OF ELASTICITY
One of the several measurements of stiffness or resistance to
deformation, but often incorrectly used to indicate specifically
static tension modulus.
MOLD CAVITY
Hollow space or cavity in the mold which is used to impart the
desired form to the product being molded.
MOLD FINISH
The uninterrupted surface produced by intimate contact of
rubber with the surface of the mold at vulcanization.
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
MOLD MARKS
Indentations or ridges embossed into the skin of the molded
product by irregularities in the mold cavity surface.
PACKING GROOVE
A groove carved in a flange, or in one member of a concentric
joint, to accommodate a packing.
MOLD REGISTER
Means used to align the parts of a mold.
PERMANENT SET
Permanent set is the deformation remaining after a specimen
has been stressed in tension a prescribed amount for a definite
period and released for a definite period.
MOONEY SCORCH
The measurement of the rate at which a rubber Compound will
precure or set up by means of the Mooney Viscometer.
MOONEY VISCOSITY
The measurement of the plasticity or viscosity of an
uncompounded or compounded unvulcanized rubber and
rubber-like materials by means of the Mooney Shearing Disk
Viscometer.
NICK
A small notch, slit, or cut.
NOMINAL LENGTH
The desired length from which tolerances are set.
NON-BLOOMING
The absence of bloom.
OIL RESISTANT
Ability of a vulcanized rubber to resist the swelling and
deteriorating effects of various type oils.
OIL SWELL
The change in volume of a rubber article due to absorption of oil.
O-RING
An elastomeric seal of homogeneous composition molded in
one piece to the configuration of a torus with circular crosssection (doughnut). The O-Ring is used as a dynamic or static
seal usually installed in a machined groove.
OPTIMUM CURE
State of vulcanization at which maximum desired property is
attained.
OVER CURE
A degree of cure greater than the optimum.
OXIDATION
The reaction of oxygen on a rubber product, usually detected by
a change in the appearance or feel of the surface or by a change
in physical properties.
OXYGEN BOMB
A chamber capable of holding oxygen at an elevated pressure
which can be heated to an elevated temperature. Used for an
accelerated aging test.
OZONE RESISTANT
Withstands the deteriorating effects of ozone (generally
cracking).
PACKING
A flexible device used to retain fluids under pressure or seal out
foreign matter.
PERMEABILITY
Property of rubber or other materials which permits passage of
gas through the molecular structure of the material.
PIT OR POCK MARK
A circular depression, usually small.
POLYMER
A material formed by the joining together of many (poly)
individual units (mer) of a monomer.
POROSITY
Quality of state of being porous due to presence of globular
structural voids.
REGISTER, OFF OR MISMATCH
Nonconformity of finished article with design dimensions due to
mold misalignment during cure.
RELATIVE HUMIDITY
The ratio of the quantity of water vapor actually present in the
atmosphere to the greatest amount possible at the given
temperature.
RESILIENCE
Capable of returning to original size and shape after
deformation.
RMS
Root mean square - The measure of surface roughness,
obtained as the square root of the sum of the squares of microinch deviation from true flat.
ROUGH TRIM
Removal of superfluous parts by pulling or picking. Usually a
small portion of the flash or sprue remains attached to the
product.
RUBBER, NATURAL
Raw or crude rubber obtained from vegetable sources, basically
the Unsaturated polymer of isoprene.
RUBBER, NITRILE (BUNA N)
Copolymer of butadiene and acrylonitrile; known commercially
as Butaprene, Chemigum, Hycar OR, Perbunan and Paracril.
RUBBER, SILICONE
Semi-organic elastomer, containing silicone.
RUBBER, SYNTHETIC
Manufactured elastomers.
101
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
RUNOUT (SHAFT)
Same as Gyration. When expressed in inches alone or
accompanied by abbreviation “TIR” (total indicator reading), it
refers to twice the radial distance between shaft axis and axis of
rotation.
SEAL
Any device used to prevent the passage of a gas or liquid.
SERVICE
Operating conditions to be met.
SHAFT
Rotating member within cylinder; not in contact with walls.
SHRINKAGE
Decreased volume of unit caused by air drying after immersion
in fluid.
SIZE, ACTUAL
Actual dimensions of the O-Ring, including tolerance limits.
SIZE, NOMINAL
Approximate size of O-Ring in fractional dimensions.
SPECIFIC GRAVITY
The ratio of the weight of a given substance to the weight of an
equal volume of water at a specified temperature.
SPRUE MARKS
Marks left on the surface of a rubber part, usually elevated, after
removal of the sprue.
SQUEEZE
Cross-section diametral compression of O-Ring between bottom
surface of the groove and surface of other mating metal part in
the gland assembly.
STATIC
Stationary application such as a gasket.
STATIC SEAL
Seal designed to work between parts having no relative motion.
STRESS
Force per unit of original cross-sectional area required to stretch
a specimen to a stated elongation.
SUN CHECKING
Surface cracks, checks, or crazing caused by exposure to direct
or indirect sunlight.
TENSILE STRENGTH.
Force in pounds per square inch required to cause the rupture of
a specimen of a rubber material.
TERPOLYMER
A polymer consisting of three different monomers chemically
combined.
THIOKOL
A synthetic rubber of the polysulfide type.
THERMAL EXPANSION
Expansion caused by increase in temperature. May be linear
and volumetric.
TORQUE
The turning power of a shaft.
TRIM
The process involving removal of mold flash.
TRIM CUT
Damage to mold skin or finish by too close trimming.
UNDER-CURE
Degree of cure less than optimum. May be evidenced by
tackiness, loginess or inferior physical properties.
VOIDS
The absence of material or an area devoid of materials where
not intended.
VISCOSITY
A manifestation of internal friction opposed to mobility. The
property of fluids and plastic solids by which they resist an
instantaneous change of shape, i.e, resistance to flow.
VOLUME CHANGE
Change in volume of a specimen which has been immersed in a
designated fluid under specified condition of time and
temperature. Expressed as a percentage of the original volume.
VOLUME SWELL
Increase in physical size caused by the swelling action of a
liquid.
VULCANIZATION
A thermo-setting involving the use of heat and pressure and
which results in greatly increased strength and elasticity of
rubber-like materials.
SWELL
Increased volume of unit caused by immersion in fluid.
WIDTH
Radial dimension. For packing rings or sets the term “packing
space” is preferred.
TEMPERATURE RANGE
Lowest temperature at which rubber remains flexible and highest
temperature at which it will function.
WIPER RING
A ring employed to remove excess fluid, mud, etc., from a
reciprocating member before it reaches the packing.
102
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
The APG Product Line
Industrial Hose Couplings
Ball Valves
Cam and Groove
EVER-TITE®
Tough-TITE™
U-TITE
Clamps
Double Bolt
High Pressure
Spiral
Steel Bands
Preformed
Open-end
Worm Gear
Combination Nipples
Foot Valves
Garden Hose
Gate Valves
Ground Joint
Menders
Nipples
Pin-lug
Push-on Hose Barbs
Standard Hose Barbs
Quick Disconnects
Sandblast
Strainers
Universal Crowfoot
Pressure Gauges
Dry – Black Steel w/Brass
Connections
Liquid Filled
Stainless Steel Case w/ Brass
Connections
All Stainless Steel
O-Rings
Aflas® 80 Durometer
Chloroprene 70 Durometer
E.P.R. 70 Durometer
Standard & Metric
Fluoroelastomer – Black
Standard 75 & 90 Durometer
Metric 75 & 90 Durometer
Fluoroelastomer – Brown
75 & 90 Durometer
Fluorosilicone 70 Durometer
Highly Saturated Nitrile
Green 70 Durometer
Standard & Metric
Black 90 Durometer
Blue TFE Coated 70
Durometer
O-Rings (continued)
Nitrile - Black
Standard 50, 70, & 90
Durometer
Metric 70 & 90 Durometer
Nitrile - Black - Peroxide Cured
90 Durometer
Nitrile - White 70 Durometer
PTFE
Silicone 70 Durometer
Standard & Metric
Square Cut Rings
Nitrile 70 Durometer
Teflon® Encapsulated
Viton® Core
Silicone Core
Urethane 70 & 90 Durometer
4 Lobe Q-Rings
Nitrile 70 Durometer
Fluoroelastomer 75
Durometer
Minnesota Quad-Rings®
Available at ENA (an APG
subsidiary)
Nitrile 70 Durometer
Viton® 70 Durometer
Non-Standard Sizes
(Vulcanized)
Kits
Standard
Metric
Splicing
Specialty
O-Ring Accessories
Measuring Devices
(Cones)
(Tapes)
(Sizing Charts)
(Gauges)
(Compound Identifiers)
Lubricants
Picks
Back-Up Rings
PTFE
Solid
Split
Spiral
Contoured Back-Up Rings
Nitrile 90 Durometer
Fluoroelastomer 90
Durometer
Leather
O-Ring Cord
Aflas® 75 Durometer
E.P.R. 70 Durometer
Fluoroelastomer - Black
Inch 75 & 90 Durometer
Metric 75 Durometer
Square 75 Durometer
Fluoroelastomer – Brown
75 Durometer
Neoprene 70 Durometer
Neoprene Sponge - Closed Cell
Nitrile
Inch – 50, 70, & 90 Durometer
Metric – 70 & 90 Durometer
Square – 70 Durometer
Silicone 70 Durometer
4-Lobe Q-Ring
Nitrile 70 Durometer
Fluoroelastomer 75
Durometer
Extrusions
EPDM
Fluoroelastomer
Neoprene - White
Neoprene Sponge - Closed Cell
Silicone - Gray
Hydraulic Seals
Loaded Lip Seals
Metal Clad Wipers
Metric Bonded Seals
Metric Compact Piston Seals
Metric Oil Seals
Metric U-Cups
Metric V Seals
Metric Wipers
Piston Cups
Rod Wipers
T-Seals
U-Cups
Vee Packings
Wear Rings
Wear Strips
WV Rings
Custom Molded Rubber
Products
Mandrel Built & Lathe Cut
Products
Rubber Roll Coverings
Rubber / Fabric Products
Rubber to Metal Bonding
103
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
The APG Product Line (continued)
Sheet Material
Black Rubber Sponge Open Cell
Black Rubber - Cloth Inserted
Butyl
Chipboard
Compressed Non-Asbestos
Cork
Cork and Buna-N
Cork and Neoprene
Cork and Neoprene Spiral
Ribbon
Cork and Synthetic Rubber Adhesive Backed
EPDM
Felt – Gray, White, & Green
Fibre-Cork
Fiberglass Cloth
Fiberglass Wire Inserted
Tacky Cloth
Filled PTFE
Fish Paper
Flexible Graphite
Fluoroelastomer
Fluoroelastomer - Nylon Inserted
Gum Rubber
Hypalon
Leather
Koroseal®
Neoprene 40, 60, 70, &
72 Durometer
Neoprene Cotton and
Nylon Inserted
Nitrile 50, 60, & 90 Durometer
Nitrile - White 50-65 Durometer
Nitrile Sponge - Closed Cell
Nitrile Nylon Inserted
Nitrile - Transformer Grade
Nomex® Paper
Nylon
PCTFE
Plant (Vegetable) Fiber
Red Rubber
Silicone 50 and 70 Durometer
Silicone Sponge
Tank Gasket
TFE and TFE Glass Filled
Vinyl Matting
Vulcanized Fiber –
Bone Hard - Red
Fabrication
Gaskets
Water-jet Cut
Steel Rule Die Cut
Industrial Glass
104
Fabrication (continued)
Pipeline Scraper Discs
Stripping (with optional
adhesive backing)
Tank Strips & Gaskets
Vulcanizing
Non-Standard O-Rings
Sleeves
Gaskets
Spiral Wound Gaskets
304 Stainless Steel / Graphite
316 Stainless Steel / Graphite
Packing
Aramid Filament
Carbon / Graphite
Carbon / TFE
Flax and Flax / TFE
General Service Packing
G.F.O.®
Graphite Filament
Inconel Wire-Inserted
Novoloid Fiber / PTFE
Pre-Lubed TFE Yarn
Pre-Lubed TFE Yarn (FDA)
PTFE Cord Packing
Stuffing Box Packing (S.B.S.)
TFE Yarn
Twisted Fiberglass Rope & Wick
Industrial Glass
Tubular Gauge Glass
Standard
High Pressure
Red Line
Heavy Wall
Heavy Wall Red Line
Borosilicate Flat Glass
Circles
Rectangles
Squares
Flat Gauge Glass
Plain
High Pressure
Reflex
Vycor® Brand Flat Glass
Circles
Rectangles
Squares
Pyrex® Brand Annular Edge
Sight Glass
Annealed
Tempered
Industrial Glass
(continued)
Fused Quartz
Circles
Rectangles
Squares
Glass Accessories
Guard Rods – Brass
Water Gauges – Brass
Gauge Glass Cutters
Gauge Glass Gaskets
PCTFE Shields
Mica Shields
Plastic Products
Replacement Safety Visors
Safety Visor Headgear
Safety Visor Hardhat Adapters
Replacement Lenses for
Sandblasting Helmets
Plastics for the Printing Industry
Custom Fabricated Die-Cut
Plastic Products
Specialty &
Miscellaneous
Products
Fastener Seals
Thread Seals
Mechanical Seal Components
O-Ring Groove Seats
(Ceramic)
(Tungsten-Carbide)
(Silicon-Carbide)
Tools
Gasket Cutters
Gasket Knives
Gauge Glass Cutters
Packing Hooks
O-Ring Picks
Punches & Punch Sets
Clamping System Tools
Tapes
Fiberglass
Kapton®
Polyester
Silicone Adhesive Backed –
Solid
Silicone Adhesive Backed –
Sponge
Teflon® Fiberglass
TFE Pipe Thread Tape
Adhesives
PTFE Flange Sealant
Stop-It® Pipe Repair System
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Notes
105
www.callapg.com
Notes
106
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
www.callapg.com
713-675-5271
1-800-888-5223
FAX 713-675-2730
FAX 1-800-444-3252
Our Policy
Prices
Prices quoted are for acceptance within thirty days from date quoted. Unless specified, prices are based on our
receiving order for quantities quoted.
Terms
Our terms of payment are 1% 10, net 30 days, unless other arrangements are made through our credit department.
Minimum Invoice
Orders consisting of O-Rings Only - $5.00.
Orders consisting of O-Rings and/or All Other Products (Excluding Plastic Products) - $15.00
City Sales Counter - $35.00
Plastic Products - $50.00
Warranty
Products are warranted against defects in workmanship and defects in material. Products having such defects will
be replaced or credited as APG elects. Liability is limited to the invoice value of the defective item. Our
responsibility shall not exceed the original purchase price of the defective product. In any event, APG shall not be
held responsible for any special or consequential damages. In all cases, please contact us for approval and routing
of return items. All claims of shortage or damage must be made within 30 days after receipt of shipment.
Freight
All orders totalling less than $750 at NET prices are F.O.B. our warehouse with no freight allowance. Orders
totalling $750 or more at NET prices, any product mix, receive full freight prepaid and allowed, provided such orders
are for one shipment within the lower 48 continental United States and provided our normal freight modes are used.
Special delivery charges incurred at the customer’s request are for the customer’s account. Exceptions to this
freight prepaid and allowed policy: all glass products. These products are F.O.B. our warehouse with no freight
allowance unless other items on the order total $750 or more at NET prices.
Catalog Information
“America’s Most Responsive Warehouse”
(713) 675-5271
1-800-888-5223
FAX: (713) 675-2730
FAX: 1-800-444-3252
P.O. Box 213 (77001)
6039 Armour Dr. (77020)
Houston, Texas
www.callapg.com
Various information sources were used to compile this catalog. We offer this information only as a guide and cannot
assume responsibility for accuracy of the data herein. Prices listed are current, subject to change.