Assembly Issue
Observation: Trimmer too hard to On /Off
Rise Appliances
Pvt. Ltd.
Quality Feedback
PCB Switch not properly aligned with the Front panel pillar as due to PCB dimension from lock to PCB top varies in each and
every unit resulting issue observed in pressing the switch.
Rise Appliances
Pvt. Ltd.
Quality Feedback
Variation in PCB dimension as shown below
Due to this Less gap as shown in Pic-2 from lock to top
end of PCB, PCB fitted towards downside and Top
panel pillar not properly aligned with the Switch
present on the PCB as shown in next slide.
Pic-1
Pic-2
Refer PCB Dimension
from Pic-1
Refer PCB Dimension
from Pic-2