DEFINE MACHINE
Ｐ1
CHUCK
Ｐ2
1. Vertical Function Key (Screen Right)
1. Vertical Function Key (Screen Right)
2. Function Key (Screen Bottom)
2. Function Key (Screen Bottom)
3. Define Machine Data Set.
3. Select from [Jig]-[CHUCK] files.
CENTER POSITION is for adjust NC-tailstock.
4.
5.
4.
END
OSP-P200 Collision Avoidance Simple Manual
By S.Fukazaki
END
5.
http://hp.vector.co.jp/authors/VA034898/
OSP-P200 Collision Avoidance Simple Manual
By S.Fukazaki
http://hp.vector.co.jp/authors/VA034898/
JAW
Ｐ3
TOOL
Ｐ4
1. Vertical Function Key (Screen Right)
1. Vertical Function Key (Screen Right)
2. Function Key (Screen Bottom)
2. Function Key (Screen Bottom)
3. Select Turret number.
3. Jaw Data Set.
4.
4.
Select Holder File.
5.
Select Tool File.
6.
5.
END
OSP-P200 Collision Avoidance Simple Manual
By S.Fukazaki
http://hp.vector.co.jp/authors/VA034898/
7.
OSP-P200 Collision Avoidance Simple Manual
By S.Fukazaki
http://hp.vector.co.jp/authors/VA034898/
BLANK MATERIAL
1. Vertical Function Key (Screen Right)
2. Function Key (Screen Bottom)
3. Select Shape & Input Data.
4.
If need add shape
5.
If all shape add then
6.
For adjust position
7.
OSP-P200 Collision Avoidance Simple Manual
By S.Fukazaki
http://hp.vector.co.jp/authors/VA034898/
Ｐ5