Usage Feature Throughput MIMO behavior Accessability PRACH Accessibility Paging Drops QoS Parameters Retainability CELL SELECTION AND RESELECTION Paging Performance Radio Bearer Failure QoS Parameters I-RAT Parameter Impact / Usage noOfTxAntennas noOfRxAntennas rachRootSequence cellRange PrachConfigurationIndex (Traffic) qRxLevMin sMeasure sNonIntraSearch qRxLevMin (All RAT) qHyst (All RAT) TreselectionRAT (IRAT) tEvaluation ( IRAT Serving) thresServingLow ( IRAT Serving) thresXLow ( IRAT Neigh) qRxLevMin ( intra-LTE) nCellChangeMedium maxNoOfPagingRecords defaultPagingCycle nB pagingDiscardTimer T310 T311 tInactivityTimer dlMaxRetxThreshold (Not tried) logicalChannelGroupRef dscp a1ThresholdRsrpPrim b2Threshold2EcNoUtra timeToTriggerB2 b2Threshold2Geran cellReselectionPriority The number of antennas that can be used for uplink beamforming/MIMO A parameter value of 0 means that the available configured resources will be used. Rach seq represent Zdef Chu with recommended 10 distance for 15 KM cells (837) Cell range select the RACCH preamble format Maximum allowed number of Paging Records included in one RRC paging message that is, the maximum UEs that can be paged per PO. Indicates the number of radio frames in the paging cycle. Used to derive the number of subframes used for paging within each paging cycle Determines the maximum t ime a received paging message may be retained N310 Out of sync indications received, initiate T310 till expiry no N311 in-sync indications RRC Connection Reestablishment timer before it goes to RRC_IDLE QCI mapping to LCG QCI mapping to DSCP threshXHigh threshXLow RIM functionality Throughput Capacity Throughput Scheduling Strategy Cell Admission Control Cell Capacity Control Interference featureStatePfs schedulingStrategy nrOfSymbolsPdcch noOfPucchSrUsers noOfPucchCqiUsers schedulingAlgorithm resourceAllocationStrategy Uplink end-user bitrate shaping birrateShapingActive dlNonGbrRatio ARP based Admission Control dlNonGbrRatio Tranismission capacity CapacityConnectedUsers Cell Admission Control Dlinterferencemanagement active configurableFrequencyStart frameStartOffset resourceAllocationStrategy Throughput Retainability Power control / Interference Intra-LTE HO serviceStateIrc (IRC) pZeroNominalPusch pZeroNominalPucch confOutputPower filterCoefficientEUtraRsrp filterCoefficientEUtraRsrq a3offset hysteresisA3 cellIndividualOffsetEUtran (PerNeighbor relationship) minBestCellHoAttempts Proportional fair strategy The scheduling strategy that is used in the RBS. resourceAllocationStrategy ( Fair / Freq selective) /CQI Random allocation of start frequency to minimize interference Start frequency offset for resources when DL interference management disable % resourceAllocationStrategy ( Fair / Freq selective) /CQI isHoAllowed Data Forwarding at Intra-LTE Handover. a2ThresholdRsrpPrim csFallbackPrio (Highest Freq priority) CS Fall back CS Fallback license Coverage-Triggered WCDMA Session Continuity license for CS Fallback to GERAN and UTRAN (CsfbToGsmWcdma) LTE UE must have WCDMA capability UtranFreqRelation LAC/TAC Mapping removeNrelTime A3offset –ANR reportStrongestCells hoAllowedEutranPolicy SON Troubleshooting Troubleshooting Throughput / Cell Edge Retainability Automatic Neighbor Relation PCI conflict reporting LTE Trace decoding Robust Header Compression Data Forwarding at Intra-LTE Handover. isRemoveAllowed cellAddRsrpThresholdEutran cellAddRsrqThresholdEutran removeNcellTime removeNrelTime anrUesEUtraIntraFIncrAnr anrUesEUtraIntraFMax a3offsetAnrDelta a5Threshold1RsrpAnrDelta blind Release with Redirect to that frequency 1-2 Secs LAC TAC Mapping Retainability throughput UE Level Oscillating Handover Minimization TCP Optimization