AL Terminal Lug SD..073935-01

4 DRAWING NO. SD073935 CATALOG NUMBER D CONDUCTOR SIZE 6 3 ALUMINUM YA8CA1 YA8CA3 YA8CA4 TYPE NO.OF. HOLES STUD SIZE 1 374 NEST INDENTOR MECHANICAL MD6 -- D K L N O.D 5 (T) 10 Y34A 9 Y34B 9 8 U8CABT (1) -- -- 9 TIN .09 [2] -- U8CABT (1) -- C Y46 Y45 7 TIN UPDATED AS PER MARKUP ECO 51953 BY YR C'H'K. SS D 3 3 NONE DIELESS (#CRIMPS) Y48BH Y60 -- -- U8CABT (1) -- 2019-08-13 00:00:00 EDT DESCRIPTION NONE .09 [2] 9 DATE 1 PLATING HYDRAULIC Y35,Y39 Y750 PAT750 REV BA INFORMATION BURNDYR INSTALLATION TOOLING (#CRIMPS) BLUE X8CART (2) X8CART (2) DIE SET W374 (1) BLUE C .62 .53 .75 .28 1.65 .25 [16] [13] [19] [7] [42] [6] 1/4 OUR840 B .62 .53 .60 .20 1.50 .20 [16] [13] [15] [5] [38] [5] .30 [8] 10 8 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT DIE INFORMATION DIE INDEX 2 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] COPPER 8 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW YA8CA2 COLOR CODE 3 -- -- -- MECHANICAL STRIP LENGTH HYDRAULIC MRC840AL (1) Y81KFT (1) MY29-3 (1) PAT81KFT (1) 3/4" C DIE 374 YA8CA1 8 STR.AL BURNDY USE KNURLED GUIDE LINES FOR CRIMP SPACING C TYP.LETTERING AS SHOWN L B 4 D N (T) B NOTES: 1. ALL HYLUGS TM REV: PE0200 B END PLUG COLOR CODED TO MATCH CRIMP DIE 1- HOLE DESIGN ACCOMMODATE U.S. STANDARD WASHERS. 2. REMOVE ALL EXCESS PENETROX A O.D TM FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 75 C (AL7CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. TM 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM . NO NEW HYPRESSES TM TRANSITION. ARE BEING PROCESSED. TO ORDER BURNDY R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 4 UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE MILLIMETER , 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA8CA-(SEE TABLE) E.S.K 7/19/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 2:1 DRAWING NO REV SD073935 SHEET 1 OF 24 BA 4 DRAWING NO. SD073935 CATALOG NUMBER 3 YA6CA1 YA6CA2 YA6CA3 YA6CA4 CONDUCTOR SIZE ALUMINUM NO.OF. HOLES STUD SIZE 6 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT 1/4 B C DIE INFORMATION DIE INDEX TYPE 1 346 161 GRAY DIE SET 346 NEST INDENTOR GRAY BURNDY MECHANICAL 10 MD6 9 X6CART (2) X6CART (2) X161 (2) W161 (1) -- L K N O.D .34 [9] .75 .65 1.19 .44 2.28 .44 [19] [17] [30] [11] [58] [11] 3/8 OUR840 D .75 .47 .75 .28 1.84 .33 [19] [12] [19] [7] [47] [8] R COLOR CODE 5 INFORMATION (T) PLATING .14 [4] TIN CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] COPPER 6 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW 2 C NONE TIN NONE BARREL LETTERING INFORMATION Y34A Y34B A6CAB (1) 9 HYDRAULIC Y35,Y39 Y750, PAT750 U6CABT (1) U161 (1) 9 8 9 Y46 7 U6CABT (1) U6CABT (1) U161 (1) U161 (1) -- -- -- 3 FIG. 2 FIG. 1 Y60 -- -- -- MECHANICAL STRIP LENGTH HYDRAULIC Y81KFT (1) MRC840AL (1) PAT81KFT (1) MY29-3 (1) Y644 (1) PAT644 (1) 7/8" C DIE 346 YA6CA1 6 STR.AL BURNDY llllllll DIE 346 llllllll llllllll llllllllllll lllllllll 1. ALL HYLUGS TM END PLUG COLOR CODED TO MATCH CRIMP DIE ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX TM UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. BARREL LETTERING VIEW FOR USE B 12 WITH COPPER OR ALUMINUM CONDUCTOR. TM MILLIMETER , TRANSITION. UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TO ORDER BURNDY Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM ARE BEING PROCESSED. 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 12 ENLARGED BARREL MARKING VIEW. 4 FIG. 2 FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 9 llllllllllll O.D FIG. 1 NOTES: llllll lllllllll YA6CA1 llllllllllll 4 lllllll llllll YA6CA2 B N llllllllllll 6 AWG AL9CU (T) llllllll GRAY DIE 346 L D DIE 346 TYP.LETTERING AS SHOWN 1- HOLE DESIGN REV: PE0200 C'H'K. DD D llllllllllll A BY NG USE KNURLED GUIDE LINES FOR CRIMP SPACING C B ECO 51953 FIG. 1 Y48BH -- DESCRIPTION UPDATED LETTERING VIEW FOR YA6CA1 & YA6CA3 FIG. 2 DIELESS (#CRIMPS) Y45 DATE 2019-08-13 00:00:00 EDT 12 INSTALLATION TOOLING (#CRIMPS) A4CD(1) B1CD(1) Y34PA -- .09 [2] 3 REV BA 1 6 AWG AL9CU D 6 3 R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA6CA-(SEE TABLE) E.S.K 7/19/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 2:1 DRAWING NO REV SD073935 SHEET 2 OF 24 BA STUD SIZE COPPER YA4CA1 YA4CA2 YA4CA3 YA4CA4 YA4CA5 YA4CA6 4 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW 4 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT .38 2.25 .41 [10] [57] [10] .88 .80 .75 [22] [20] [19] -- 10 Y34A Y34B X4CART (3) X4CART (3) W162 (3) A4CAB (1) -- A1CD(1) B1CD(1) Y34PA 9 .44 2.32 .44 [11] [59] [11] -- TIN .11 [3] 9 9 Y46 8 U4CABT (1) U162 (1) 9 Y45 7 U4CABT (1) U4CABT (1) U162 (1) U162 (1) -- -- -- ECO 51953 BY YR C'H'K. SS 3 FIG. 1 TIN 3 FIG. 2 TIN 3 FIG. 2 llllllllllll Y60 -- -- MECHANICAL HYDRAULIC llllllllllll lllllll llllllllllll lllllllll llllll llllllll llllllll FIG. 2 BARREL LETTERING VIEW 12 C 1" 2X D N llllllll STRIP LENGTH Y81KFT (1) PAT81KFT (1) MRC840AL (2) Y644 (1) MY29-3 (1) PAT644 (1) Y444 (1) PAT444 (1) -- llllllll FIG. 1 DIELESS (#CRIMPS) Y48BH llllllll n K E C 4 B N O.D ACCOMMODATE U.S. STANDARD WASHERS TM llllllllllll FIG. 1 TIN -- UPDATED AS PER MARKUP D FIG. 2 3 HYDRAULIC Y35,Y39 Y750 PAT750 DESCRIPTION FIG. 1 NONE .12 [3] DATE 2019-08-13 00:00:00 EDT FIG. 2 3 TIN .12 [3] REV BA 12 NONE .12 [3] L D 2- HOLE DESIGN B END PLUG COLOR CODED TO MATCH CRIMP DIE FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. TM 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM MILLIMETER , UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TRANSITION. TO ORDER BURNDY R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) ARE BEING PROCESSED. 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com ENLARGED BARREL MARKING VIEW. 4 .43 [11] .18 [5] TYP.LETTERING AS SHOWN 2. REMOVE ALL EXCESS PENETROX 12 .33 [8] PLATING USE KNURLED GUIDE LINES FOR CRIMP SPACING NOTES: TM .25 2.13 [6] [54] (T) BURNDYR INSTALLATION TOOLING (#CRIMPS) GREEN DIE SET -- .33 [8] .88 .88 3.11 1.75 .56 4.50 .63 [22] [22] [79] [44] [14] [114] [16] 2 375 162 1. ALL HYLUGS REV: PE0200 .88 .80 .94 [22] [20] [24] MD6 1- HOLE DESIGN A 1 3/8 C B O.D -- OUR840 (T) N .88 .80 .87 [22] [20] [22] MECHANICAL NEST INDENTOR L K 5/16 TYPE 375 E .28 2.13 [7] [54] DIE INDEX GREEN D -- DIE 375 YA4CA1 4STR.AL BURNDY C C .88 .47 .75 [22] [12] [19] 1/2 DIE INFORMATION B 1/4 -- YA4CA8 COLOR CODE NO.OF. HOLES BARREL LETTERING INFORMATION DIE 375 ALUMINUM INFORMATION 5 BURNDY YA4CA1 D 6 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 1 YA4CA2 3 CONDUCTOR SIZE 2 4 AWG AL9CU CATALOG NUMBER 3 DIE 375 SD073935 GREEN DIE 375 4 AWG AL9CU 4 DRAWING NO. 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA4CA-(SEE TABLE) E.S.K 7/19/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 2:1 DRAWING NO REV SD073935 SHEET 3 OF 24 BA 4 DRAWING NO. SD073935 CATALOG NUMBER 3 D 6 3 CONDUCTOR SIZE ALUMINUM STUD SIZE COPPER YA2CA1 YA2CA2 YA2CA3 YA2CA4 YA2CA5 #2 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW #2 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT PINK C E L K N O.D (T) -- .38 2.50 .41 [10] [64] [10] .16 [4] 3/8 1.12 .88 .94 [28] [22] [24] -- .44 2.56 .44 [11] [65] [11] .16 [4] 1 1.00 [25] 1.12 [28] R 2 .50 [13] .88 [22] .75 .28 -[19] [7] 3.11 1.75 .56 [79] [44] [14] INSTALLATION TOOLING (#CRIMPS) MECHANICAL Y34A Y34B 10 DIE INDEX TYPE OUR840 MD6 348 163 239 PINK DIE SET X2CART (4) X239 (4) X2CART (4) W163 (3) W239 (2) A2CAB (1) -- A26D(1) B26D(1) Y34PA NEST INDENTOR D 1.12 .88 .88 [28] [22] [22] BURNDY DIE INFORMATION B -- 9 9 Y35,Y39 Y750 PAT750 U2CABT (1) U163 (1) U239 (1) .53 [13] 2.25 .33 [57] [8] 4.73 .63 [120] [16] BARREL LETTERING INFORMATION INFORMATION 5/16 1/2 348 C NO.OF. HOLES 1/4 YA2CA9 COLOR CODE 5 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] PLATING TIN NONE TIN 3 8 Y46 7 Y45 U2CABT (1) U2CABT (1) U163 (1) U163 (1) U239 (1) U239 (1) -- -- -- Y48BH -- -- 3 BY YR C'H'K. SS D FIG. 1 TIN 3 FIG. 2 TIN 3 FIG. 2 Y60 MECHANICAL STRIP LENGTH HYDRAULIC Y81KFT (2) PAT81KFT (2) MRC840AL (2) Y644 (1) MY29-3 (2) PAT644 (1) Y444 (1) PAT444 (1) -- -- 1 1/4" C D N DIE 348 YA2CA1 2 STR.AL BURNDY TYP.LETTERING AS SHOWN ECO 51953 UPDATED AS PER MARKUP FIG. 2 USE KNURLED GUIDE LINES FOR CRIMP SPACING C DESCRIPTION FIG. 1 DIELESS (#CRIMPS) 9 DATE 2019-08-13 00:00:00 EDT FIG. 2 HYDRAULIC 9 REV BA 1 12 NONE .22 [6] .16 [4] 2 2X n K E C L 2- HOLE DESIGN O.D llllllllllll llllllll llllllll AL9CU TM REV: PE0200 A TM FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. FOR USE llllllll llllllll llllllllllll lllllllll B lllllllll CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. WITH COPPER OR ALUMINUM CONDUCTOR. ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS .NO NEW HYPRESSES TRANSITION. R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) TM 12 UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TO ORDER BURNDY ARE BEING PROCESSED. 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com ENLARGED BARREL MARKING VIEW. 4 BARREL LETTERING VIEW MILLIMETER , 6 TM FIG. 2 FIG. 1 TM 4 12 llllll ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX 3 llllllllllll DIE 348 1. ALL HYLUGS END PLUG COLOR CODED TO MATCH CRIMP DIE 1- HOLE DESIGN NOTES: llllll YA2CA1 B llllllllllll BURNDY YA2CA5 N 2 AWG 4 DIE 348 (T) B PINK DIE 348 2 AWG AL9CU D 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA2CA-(SEE TABLE) E.S.K 7/19/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 4 OF 24 BA YA1CA1 YA1CA2 YA1CA3 YA1CA4 #1 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW 3/8 #1 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT GOLD 1 1/4 1/2 BURNDY DIE INFORMATION R B C D E L K N .91 .76 1.19 [23] [19] [30] -- .44 2.59 .44 -- [11] [66] [11] .91 .52 .75 [23] [13] [19] --- .28 2.16 .33 [7] [55] [8] .91 .76 .81 -[23] [19] [21] -- 5/16 YA1CA9 COLOR CODE NO.OF. HOLES .38 2.25 .41 [10] [57] [10] O.D .54 [14] .91 .88 3.11 1.75 .56 4.52 .63 [23] [22] [79] [44] [14] [115] [16] 2 (T) PLATING .19 [5] TIN 3 NONE .19 [5] .19 [5] .19 [5] BARREL LETTERING INFORMATION DIE INDEX TYPE OUR840 MD6 471 163 GOLD DIE SET X1CART (3) X1CART (3) W163 (3) 471 NEST INDENTOR -- -- 10 9 Y34A Y34B 9 A1CAR (1) HYDRAULIC Y35,Y39 9 9 Y750 Y46 Y45 7 8 PAT750 U1CART (1) U1CART (1) U1CART (1) U163 (1) U163 (1) U163 (1) A26D(1) B26D(1) Y34PR-5 P26D(1) P34PR-5 -- C -- --- DESCRIPTION ECO 51953 UPDATED AS PER MARKUP BY YR C'H'K. SS FIG. 2 D FIG. 1 TIN 3 FIG. 2 TIN 3 FIG. 2 TIN 3 FIG. 2 llllllllllll DIELESS (#CRIMPS) Y48BH DATE 2019-08-13 00:00:00 EDT 12 INSTALLATION TOOLING (#CRIMPS) MECHANICAL REV BA Y60 --- llllllll llllllll MECHANICAL llllllllllll llllllll DIE 471 STUD SIZE COPPER INFORMATION llllllllllll lllllll llllllll llllllllllll lllllllll BURNDY YA1CA3 ALUMINUM 5 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 1 llllll YA1CA2 6 3 D CONDUCTOR SIZE 2 1 AWG AL9CU CATALOG NUMBER 3 DIE 471 SD073935 GOLD DIE 471 1 AWG AL9CU 4 DRAWING NO. llllllll STRIP LENGTH HYDRAULIC FIG. 2 FIG. 1 Y81KFT (2) PAT81KFT (2) MRC840AL (2) Y644 (1) MY29-3 (2) PAT644 (1) Y444 (1) PAT444 (1) BARREL LETTERING VIEW 1 1/16" 12 C D USE KNURLED GUIDE LINES FOR CRIMP SPACING DIE 471 YA1CA1 1 STR.AL BURNDY N C TYP.LETTERING AS SHOWN 2X E n K C L B D N (T) 4 O.D 2- HOLE DESIGN B 1- HOLE DESIGN NOTES: 1. ALL HYLUGS TM ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX REV: PE0200 A TM FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. TM DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TRANSITION. ARE BEING PROCESSED. TO ORDER BURNDY R PRODUCTS CALL CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com ENLARGED BARREL MARKING VIEW. 4 MILLIMETER , UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 12 B END PLUG COLOR CODED TO MATCH CRIMP DIE 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA1CA-(SEE TABLE) E.S.K 7/19/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 5 OF 24 BA COPPER YA25A1 5/16 YA25A2 YA25A3 YA25A10 YA25A5 1.05 [27] 1/2 -- -- 3/8 YA25A6 YA25A7 D .82 [21] .82 [21] .69 [18] .82 [21] 1.03 [26] E H .87 [22] -- 1.18 [30] -- 1.18 [30] 1.34 [34] -- .44 [11] 2.67 [68] .63 [16] .21 [5] -- -- .44 [11] .63 [16] .21 [5] -- -- .56 [14] 2.67 [68] -- -- 2.31 [59] .44 [11] 3.73 [95] .60 [15] .87 [22] -- 1.05 [27] .82 [21] 2.24 [57] 1.06 [27] 1.03 [26] 3.10 [79] 1.75 [44] YA25A790 DIE INFORMATION COLOR CODE TAN TYPE 296 241 TAN DIE SET 296 NEST INDENTOR -- 3.44 [87] 9 Y34A Y34B A25AR (1) A27D(1) B27D(1) Y34PR-5 9 Y35,Y39 Y750, PAT750 U25ART(1) U241 (1) 9 8 9 Y46 7 TIN FIG. 2 NONE FIG. 2 TIN FIG. 1 3 TIN FIG. 2 3 TIN FIG. 1 3 .21 [5] TIN FIG. 2 3 NONE FIG. 1 TIN FIG. 2 .63 [16] .17 [4] NONE FIG. 1 TIN FIG. 2 P27D(1) P34PR-5 -- Y48BH Y60 C25AR (1) U241 (1) -- -- -- MECHANICAL llllllll llllllll llllllllllll N E O.D. 12 BARREL LETTERING VIEW SEE TABLE ACCOMMODATE U.S. STANDARD WASHERS TM llllllllllll llllllll llllllll lllllllll 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. TM 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM MILLIMETER , 2- HOLE 90 $ DESIGN 3 USE KNURLED GUIDE LINES FOR CRIMP SPACING K DIA. C STRIP LENGTH BARREL LETTERING VIEW 12 SEE TABLE L 4 B D 1 3/16" N T REF. lllllll O.D END PLUG COLOR CODED TO MATCH CRIMP DIE 1- HOLE DESIGN N lllllllll C FIG. 2 FIG. 1 BARREL LETTERING VIEW 12 2- HOLE DESIGN K DIA. [2 PLCS] UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TO ORDER BURNDY R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com ENLARGED BARREL MARKING VIEW. 3 B BARREL LETTERING VIEW 12 SEE TABLE E TRANSITION. ARE BEING PROCESSED. 11. ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 4 C FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. WITH COPPER OR H L D llllllllllll B T REF. YA25A2 TM C'H'K. SS D 3 HYDRAULIC lllllll BY YR D Y81KFT (2) PAT81KFT (2) MRC840AL (2) Y644 (1) MY29-3 (2) PAT644 (1) Y444 (1) PAT444 (1) -- ECO 51953 UPDATED AS PER MARKUP C 3 DIELESS (#CRIMPS) Y45 U25ART(1) U25ART (1) U241 (1) U241 (1) UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) FOR USE ALUMINUM CONDUCTOR. APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 12 FIG. 1 HYDRAULIC 3 10 NONE .21 [5] .63 [16] NOTES: 2. REMOVE ALL EXCESS PENETROX REV: PE0200 10 X25ART (4) X25ART (4) X241 (4) W241 (2) -- 1.70 [43] FIG. 2 DESCRIPTION K DIA. [2 PLCS] 3 TIN .17 [4] .60 [15] -- 4.59 [117] .56 [14] -- .63 [16] llllllllllll 1. ALL HYLUGS A MD6 -- 2.83 [72] .21 [5] BURNDYR INSTALLATION TOOLING (#CRIMPS) MECHANICAL OUR840 -- 2.36 [60] .41 [10] PLATING DATE 2019-08-13 00:00:00 EDT 1/0 AWG AL9CU B DIE INDEX O.D -- 1.00 [25] 1.05 [27] N 2.31 [59] -- 1/2 L .38 [10] 2 YA25A8 K DIA. DIE 296 YA25A9 .60 [15] 1.05 [27] 3/8 1/0 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT 1.00 [25] 1.05 [27] 1 1/0 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW C T REF. REV BA BARREL LETTERING 12 INFORMATION BURNDY YA25A3 YA25A4 B 1.05 [27] 3/8 YA25A3NT69 C NO.OF HOLES DIE 296 STUD SIZE INFORMATION TAN DIE 296 1/0 AWG AL9CU ALUMINUM 5 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 1 DIE 296 6 3 D CONDUCTOR SIZE 2 YA25A790 CATALOG NUMBER 3 1/0 STR AL9CU HV SD073935 DIE 296 4 DRAWING NO. 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA25A-(SEE TABLE) E.S.K 7/19/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 6 OF 24 BA YA26A2 YA26A6 YA26A7 YA26A8 YA26A9 2/0 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW 3/8 1.17 .67 1.18 [30] [17] [30] 1 L K N O.D 3/8 C MECHANICAL DIE INFORMATION OLIVE TIN FIG. 2 3 TIN FIG. 2 3 TIN FIG. 2 3 TIN FIG. 2 3 .20 [5] -- .44 2.79 .44 [11] [71] [11] .24 [6] .38 2.52 .41 [10] [64] [10] -- NONE .24 [6] .20 [5] .20 [5] 1.17 .92 1.89 1.00 .44 3.56 .44 [30] [23] [48] [25] [11] [90] [11] .24 [6] FIG. 1 TIN FIG. 2 TIN FIG. 2 NONE FIG. 1 TIN FIG. 2 TYPE OUR840 MD6 297 BG 245 OLIVE DIE SET X26ART (4) XBG (4) X245 (4) X26ART (4) WBG (2) W245 (3) 297 NEST INDENTOR -- -- 10 9 Y34A Y34B A26AR (2) A29D(1) B29D(1) Y34PR-5 Y35,Y39 Y750 PAT750 9 9 9 Y46 8 Y45 7 UPDATED AS PER MARKUP Y48BH Y60 U26ART (2) UBG (2) U245 (1) U26ART (2) UBG (2) U245 (1) U26ART (2) UBG (2) U245 (1) C28AR (1) -- -- P29D(1) P34PR-5 -- -- -- llllllllllll llllllll 3 llllllllllll 3 llllllll llllllllllll lllllllll lllllllll lllllllll lllllllll BY YR C'H'K. SS lllllllllll lllllllllll llllllllllll FIG. 2 BARREL LETTERING VIEW 12 STRIP LENGTH MRC840AL (3) MY29-3 (2) Y81KFT (2) PAT81KFT (2) Y644 (1) PAT644 (1) C 1 3/8" Y444 (1) PAT444 (1) E llllllll FIG. 1 HYDRAULIC N llllllll 3 MECHANICAL USE KNURLED GUIDE LINES FOR CRIMP SPACING ECO 51953 D DIELESS (#CRIMPS) HYDRAULIC DIE INDEX DESCRIPTION llllllllllllllllllllllllllllllllllllllllllllllllllllllll .24 [6] 1.17 1.03 3.11 1.75 .56 4.78 .63 [30] [26] [79] [44] [14] [121] [16] BURNDYR INSTALLATION TOOLING (#CRIMPS) COLOR CODE PLATING .56 3.03 .63 [14] [77] [16] .69 3.03 .63 .67 [18] [77] [16] [17] 1.17 1.03 1.57 .75 .38 3.24 .41 [30] [26] [40] [19] [10] [82] [10] 2 (T) -- -- 1.17 1.03 1.36 [30] [26] [35] 1/2 YA26A5 E 1.17 .67 .81 [30] [17] [21] 5/16 YA26A4 D 1.17 1.03 1.36 [30] [26] [35] 5/8 YA26A3 C 1/2 5/16 2/0 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT B DATE 2019-08-13 00:00:00 EDT BURNDY YA26A3 YA26A1 NO.OF. HOLES BARREL 12 LETTERING INFORMATION REV BA DIE 297 STUD SIZE COPPER INFORMATION 5 YA26A2 D ALUMINUM CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 1 OLIVE DIE 297 6 3 CONDUCTOR SIZE 2 2/0 AWG AL9CU CATALOG NUMBER 3 DIE 297 SD073935 2/0 AWG AL9CU 4 DRAWING NO. 2X D n K C C L D (T) B TM REV: PE0200 B FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. TM 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 12 ENLARGED BARREL MARKING VIEW. 4 2- HOLE DESIGN END PLUG COLOR CODED TO MATCH CRIMP DIE ACCOMMODATE U.S. STANDARD WASHERS TM BARREL LETTERING VIEW 12 SEE TABLE O.D 1- HOLE DESIGN 2. REMOVE ALL EXCESS PENETROX A 4 B N NOTES: 1. ALL HYLUGS BARREL 12 LETTERING VIEW SEE TABLE TM MILLIMETER , UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TRANSITION. ARE BEING PROCESSED. TO ORDER BURNDY R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA26A-(SEE TABLE) E.S.K 7/9/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 7 OF 24 BA YA27A2 YA27A3 YA27A4 YA27A5 YA27A6 3/0 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT YA27A7 COLOR CODE C RUBY D E 1.11 .73 1.18 [28] [19] [30] L K N 2.88 [73] -- 1/2 1.31 1.04 1.37 [33] [26] [35] -- .56 [14] 3.27 [83] 1/2 1.31 1.04 3.12 1.75 .56 [33] [26] [79] [44] [14] 5.02 [128] 1.31 1.04 1.89 1.00 .44 [33] [26] [48] [25] [11] 3.79 [96] 1 2 3/8 DIE INFORMATION C .44 [11] 3/8 3/0 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW B (T) .44 [11] .26 [7] .63 .76 [16] [19] .26 [7] .63 [16] .26 [7] .44 [11] .26 [7] PLATING 10 Y34A Y34B DIE INDEX TYPE OUR840 MD6 467 166 RUBY DIE SET X27ART (4) X27ART (4) W166 (4) A27AR (2) 467 NEST INDENTOR -- A30D(1) B30D(1) Y34PR-5 9 9 HYDRAULIC Y35,Y39 9 9 Y750 Y46 Y45 8 7 PAT750 U27ART (2) U27ART (2) U27ART (2) U166 (2) U166 (2) U166 (2) P30D(1) P34PR-5 -- -- DATE DESCRIPTION 2019-08-13 00:00:00 EDT FIG. 2 NONE FIG. 1 TIN FIG. 2 3 TIN FIG. 2 3 llllllllllllllllllllllllllllllllllllllllllllllllllllllll FIG. 2 3 llllllllllll NONE FIG. 1 TIN llllllllllll DIELESS (#CRIMPS) U27AR (1) -- Y60 MECHANICAL llllllll llllllll llllllll llllllllllll lllllllll lllllllll lllllllll lllllllll llllllll llllllllllll HYDRAULIC -- lllllllllll FIG. 2 FIG. 1 STRIP LENGTH Y81KFT (2) PAT81KFT (2) MRC840AL (3) Y644 (1) MY29-3 (2) PAT644 (1) Y444 (1) PAT444 (1) -- C'H'K. SS D lllllllllll Y48BH BY YR 3 FIG. 1 NONE ECO 51953 UPDATED AS PER MARKUP TIN BURNDYR INSTALLATION TOOLING (# CRIMPS) MECHANICAL -- 3.08 [78] O.D REV BA BURNDY YA27A5 YA27A1 NO.OF. HOLES BARREL 12 LETTERING INFORMATION DIE 467 STUD SIZE COPPER INFORMATION 5 YA27A2 D ALUMINUM CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 1 RUBY DIE 467 6 3 CONDUCTOR SIZE 2 3/0 AWG AL9CU CATALOG NUMBER 3 DIE 467 SD073935 3/0 AWG AL9CU 4 DRAWING NO. BARREL LETTERING VIEW 12 C 1 1/2" USE KNURLED GUIDE LINES FOR CRIMP SPACING C D L B D B 1. ALL HYLUGS TM REV: PE0200 END PLUG COLOR CODED TO MATCH CRIMP DIE TM UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. TM FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE MILLIMETER , TRANSITION. ARE BEING PROCESSED. 11. ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 12 2- HOLE DESIGN FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 10 B BARREL LETTERING VIEW SEE TABLE 12 ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX A n K O.D 1- HOLE DESIGN NOTES: 2X E C N (T) 4 N BARREL 12 LETTERING VIEW SEE TABLE TO ORDER BURNDY PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com ENLARGED BARREL MARKING VIEW. 4 R 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA27A-(SEE TABLE) E.S.K 7/19/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 8 OF 24 BA ALUMINUM CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] STUD SIZE COPPER YA28A1 YA28A2 YA28A3 YA28A4 3/8 YA28A6 YA28A7 YA28A8 5/8 4/0 AWG CLASS B CONCENTRIC COMPRESSED COMPACT SIW 4/0 AWG CLASS B,C CONCENTRIC COMPRESSED COMPACT YA28A345 YA28A590 COLOR DIE INFORMATION CODE DIE TYPE INDEX 1/2 298 660 WHITE 298 WHITE DIE SET NEST INDENTOR MECHANICAL OUR840 1 .30 [8] 1.39 1.17 3.11 1.75 .56 5.19 .63 [35] [30] [79] [44] [14] [132] [16] .30 [8] .56 3.44 .63 [14] [87] [16] --- .30 [8] 1.39 1.17 1.36 [35] [30] [35] .30 [8] 3.48 .56 [88] .63 [14] 1.90 [16] [48] 3 TIN 3 TIN 3 TIN 3 2.22 [56] 2.70 [69] X28ART (6) X28ART (6) X660 (8) W660 (3) -- 10 Y34A Y34B 10 2.73 [69] A28AR (2) U28ART (2) U660 (2) A31D(1) B31D(1) Y34PR-5 -- 10 9 10 Y46 8 U28ART (2) U28ART (2) U660 (2) U660 (2) P31D(1) P34PR-5 Y48BH Y60 C28AR (1) -- -- -- -- TIN 3 1. ALL HYLUGS REV: PE0200 A O.D. MECHANICAL (H) HYDRAULIC 12 STRIP LENGTH TM ACCOMMODATE U.S. STANDARD WASHERS TM Y81KFT (2) PAT81KFT (2) MRC840AL (3) Y644 (1) 1 5/8" MY29-3 (2) PAT644 (1) Y444 (1) PAT444 (1) C L N L WITH COPPER O.D D N O.D B END PLUG COLOR CODED TO MATCH CRIMP DIE 2X E n K TM 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 NO-OX-ID "A" COATED TO PREVENT FORMATION OF OXIDATION 7 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 8 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 9 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 11 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM (H) TRANSITION. ARE BEING PROCESSED. 13 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. TO ORDER BURNDY SCALE 3:4 DESIGN PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) (T) 1- HOLE 90 $ R CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 3 UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE 2- HOLE DESIGN D 12 12 CAN ALSO BE ORDERED AS 2 HOLE 45 AND 90 DEGREE. C B MILLIMETER , 10 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 4 TYP.LETTERING AS SHOWN 1- HOLE DESIGN FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. C DESIGN 4 B D N UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) FOR USE OR ALUMINUM CONDUCTOR. APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 1- HOLE 45 $ USE KNURLED GUIDE LINES FOR CRIMP SPACING C 2. REMOVE ALL EXCESS PENETROX 3 D L (T) B C'H'K. SS D K NOTES: BY YR B DIELESS (#CRIMPS) Y45 ECO 51953 (T) 3 HYDRAULIC Y35,Y39 Y750 PAT750 UPDATED AS PER MARKUP N 6 TIN BURNDY R INSTALLATION TOOLING (#CRIMPS) 11 DESCRIPTION C 3 NONE NONE 1 K TIN NONE TIN NONE -- .30 [8] DATE 2019-08-13 00:00:00 EDT PLATING .30 [8] 1.39 1.17 3.11 1.75 .56 5.19 .63 [35] [30] [79] [44] [14] [132] [16] -- H REF. .30 [8] 1.39 1.17 3.11 1.75 .56 3.63 .63 [35] [30] [79] [44] [14] [98] [16] 2 MD6 -- .69 3.60 .75 [18] [91] [19] -- .85 1.39 1.17 1.89 1.00 .44 3.97 .44 [35] [30] [48] [25] [11] [101] [11] [22] 2 1/2 .30 [8] 1.39 1.17 1.52 [35] [30] [39] 1/2 3/8 .44 3.26 .44 [11] [83] [11] 1.39 1.17 1.36 [35] [30] [35] 1 1/2 YA28A390 C 1 1/2 YA28A9 YA28A5 NO.OF. B C D E L N O.D T HOLES ±.08 ±.04 REF. ±.02 ±.02 ±.12 ±.03 ±.01 REF. 1.39 1.17 1.18 [35] [30] [30] REV BA INFORMATION 5 4/0 STR.AL 7 3 D CONDUCTOR SIZE 2 BURNDY CATALOG NUMBER 3 YA28A1 SD073935 DIE 298 4 DRAWING NO. 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA28A-(SEE TABLE) E.S.K 7/19/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/19/95 P.WERTHMAN 6/19/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 9 OF 24 BA YA29A2 YA29A3 YA29A4 YA29A5 YA29A6 1/2 250 Kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW 250 Kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT 1 B C D 1.45 1.26 1.36 [37] [32] [35] E L K N O.D .56 3.53 .63 [14] [90] [16] -- 1.45 1.26 3.11 1.75 .56 5.28 .63 [37] [32] [79] [44] [14] [134] [16] 1/2 2 3/8 1.45 1.26 1.52 [37] [32] [39] 1 5/8 1.45 1.26 1.89 1.00 .44 4.06 .44 [37] [32] [48] [25] [11] [103] [11] PLATING .33 [8] TIN 3 TIN 3 TIN TIN NONE .33 [8] .92 [37] NONE .33 [8] .69 3.69 .75 [18] [94] [19] -- (T) .33 [8] REV BA DATE DESCRIPTION 2019-08-13 00:00:00 EDT FIG. 2 llllllllllll 3 FIG. 2 llllllllllllllllllllllllllllllllllllllllllllllllllllllll 3 FIG. 2 FIG. 1 324 Y34A Y34B OUR840 MD6 RED DIE SET -- -- A29AR (2) -- A32D(1) B32D(1) Y34PR-5 NEST INDENTOR -- 9 9 C U29ART (2) -- llllllll llllllll llllllllllll lllllllll lllllllll lllllllll lllllllll llllllll llllllll llllllllllll 1. ALL HYLUGS REV: PE0200 8 TM Y45 7 U29ART U29ART (2) (2) P32D(1) P34PR-5 -- TM MECHANICAL HYDRAULIC -- Y81KFT (2) PAT81KFT (2) Y644 (1) PAT644 (1) Y444 (1) PAT444 (1) L29ART (1) -- -- BARREL LETTERING VIEW 12 1 5/8" C D N 2X E n K TYP.LETTERING AS SHOWN O.D 2- HOLE DESIGN B END PLUG COLOR CODED TO MATCH CRIMP DIE FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. TM 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 10 C29AR (1) Y60 FIG. 2 FIG. 1 ACCOMMODATE U.S. STANDARD WASHERS 3 9 Y48BH USE KNURLED GUIDE LINES FOR CRIMP SPACING 1- HOLE DESIGN 2. REMOVE ALL EXCESS PENETROX A DIE 324 N NOTES: 9 Y46 STRIP LENGTH lllllllllll 4 B D B 9 D C L (T) Y35,Y39 Y750 PAT750 DIELESS (#CRIMPS) HYDRAULIC 250 Kcmil RED 10 TYPE YA29A1 C DIE INDEX MECHANICAL BURNDY DIE INFORMATION C'H'K. SS FIG. 1 lllllllllll COLOR CODE BY YR FIG. 2 llllllllllll BURNDYR INSTALLATION TOOLING (#CRIMPS) ECO 51953 UPDATED AS PER MARKUP 12 DIE 324 YA29A1 NO.OF. HOLES BARREL LETTERING INFORMATION BURNDY YA29A5 STUD SIZE COPPER INFORMATION 5 YA29A2 D ALUMINUM CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 1 RED DIE 324 6 3 CONDUCTOR SIZE 2 250 kcmil AL9CU CATALOG NUMBER 3 DIE 324 SD073935 250 kcmil AL9CU 4 DRAWING NO. MILLIMETER , UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TRANSITION. TO ORDER BURNDY Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) ARE BEING PROCESSED. 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 12 ENLARGED BARREL MARKING VIEW. 4 R 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA29A-(SEE TABLE) E.S.K 7/20/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 8/19/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 10 OF 24 BA YA30A2 300 Kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW YA30A6 YA30A3 YA30A4 4/0 AWG CCA DLO (329/22) YA30A5 YA30A9NT100 COLOR CODE C BLUE 300 Kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT 470 OUR840 BLUE DIE SET -- NEST INDENTOR -- 1 BURNDY R MD6 9 B -- PLATING .36 [9] .44 3.90 .63 [11] [99] [16] .36 [9] 1.01 [26] .38 3.90 .63 [10] [99] [16] TIN 3 FIG. 2 TIN 3 FIG. 2 TIN 3 FIG. 2 NONE .36 [9] INSTALLATION TOOLING (#CRIMPS) -- A30AR (2) -- A34D(1) Y34PR-11 9 HYDRAULIC Y35,Y39 9 9 Y750 Y46 Y45 7 8 PAT750 U30ART U30ART U30ART (2) (2) (2) P34D(1) P48PR-1 -- DIE 470 FIG. 1 3 FIG. 2 llllllllllll Y60 C30AR (1) L30ART (1) C34D(1) Y48PR-1 MECHANICAL HYDRAULIC -- Y81KFT (2) PAT81KFT (2) Y644 (1) PAT644 (1) Y444 (1) PAT444 (1) -- 1. ALL HYLUGS TM TYP.LETTERING AS SHOWN D llllllllllll lllllllll lllllllll llllllll llllllll llllllllllll lllllllllll FIG. 2 FIG. 1 BARREL LETTERING VIEW 13 STRIP LENGTH C 1 3/4" D 2X E N n K C O.D 2- HOLE DESIGN B FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. TM DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. MILLIMETER , 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TRANSITION. UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TO ORDER BURNDY TM ARE BEING PROCESSED. 11. UL LISTED WITH DLO COPPER CLAD ALUMINUM CONDUCTOR USING Y644 AND Y444 TOOLS ONLY. 12 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 13 ENLARGED BARREL MARKING VIEW. 4 llllllll lllllllll END PLUG COLOR CODED TO MATCH CRIMP DIE 3 10 C'H'K. SS 4 ACCOMMODATE U.S. STANDARD WASHERS TM BY YR FIG. 2 3 DIELESS (#CRIMPS) Y48BH llllllll llllllllllllllllllllllllllllllllllllllllllllllllllllllll USE KNURLED GUIDE LINES FOR CRIMP SPACING B N -- llllllllllll lllllllll lllllllllll TIN ECO 51953 UPDATED AS PER MARKUP FIG. 1 NONE TIN DESCRIPTION 13 NOTES: 5 REV: PE0200 .56 3.90 .63 [14] [99] [16] (T) .36 [9] D 2. REMOVE ALL EXCESS PENETROX A O.D 1.53 1.00 1.37 [39] [25] [35] L (T) -- N .36 [9] C 1- HOLE DESIGN -- L K 1.53 1.38 1.89 1.00 .44 4.42 .44 [39] [35] [48] [25] [11] [112] [11] Y34A Y34B 10 n E 1.53 1.38 3.11 1.75 .56 5.64 .63 [39] [35] [79] [44] [14] [143] [16] 3/8 MECHANICAL TYPE 1.53 1.38 1.37 [39] [35] [35] 2 5/16 DIE INFORMATION DIE INDEX 1/2 D 1.53 1.38 1.37 [39] [35] [35] 1 3/8 C YA30A1 D 1/2 B 300 Kcmil YA30A1 NO.OF. HOLES BURNDY STUD SIZE DATE 2019-08-13 00:00:00 EDT DIE 470 COPPER REV BA BURNDY YA30A3 ALUMINUM BARREL LETTERING INFORMATION INFORMATION 5 YA30A1 6 3 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 1 BLUE DIE 470 CONDUCTOR SIZE 2 300 kcmil AL9CU CATALOG NUMBER 3 DIE 470 SD073935 300 kcmil AL9CU 4 DRAWING NO. 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA30A-(SEE TABLE) E.S.K 7/20/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 8/19/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 11 OF 24 BA 6 CONDUCTOR SIZE STUD SIZE COPPER YA31A1 YA31A2 YA31A3 YA31A4 D NO.OF. HOLES B C D E 1 1.85 [47] 1.52 [39] 1.37 [35] -- -- 1.75 [44] -- 1/2 1.85 [47] 1/2 YA31A5 350 Kcmil CLASS B YA31A5NT119 CONCENTRIC YA31A5NT100 COMPRESSED 350 Kcmil CLASS B,C COMPACT YA31A6 CONCENTRIC SIW COMPRESSED COMPACT YA31A9NT100 250 Kcmil CCA DLO (399/22) YA31A12 3/8 1.85 [47] 2 1.85 [47] 3/8 1.85 [47] 3/8 3/8 1 5/8 YA31A190 1/2 YA31A390 1/2 1.85 [47] 1.85 [47] 1.85 [47] R C COLOR CODE DIE INFORMATION DIE INDEX TYPE BROWN DIE SET BROWN 299 NEST INDENTOR BURNDY MECHANICAL OUR840 -- MD6 W31ART (4) -- -- 10 9 1.85 [47] 2 1.52 [39] 3.11 [79] 1.52 [39] 1.89 [48] 1.00 [25] 1.00 [25] 1.89 [48] 1.52 [39] -- -- -- -- -- -- -- 1.37 [35] -- 3.74 [95] 3.11 [79] 1.75 [44] 3.74 [95] 1.89 [48] 1.52 [39] 1.37 [35] 1.52 [39] 1.52 [39] -- 1.00 [25] .89 [23] 1.00 [25] H K .56 [14] .56 [14] L N 4.33 [110] .63 [16] 6.07 [154] .44 [11] .44 [11] 3.85 [98] .44 [11] .44 [11] .65 [17] .56 [14] .56 [14] 4.85 [123] Y35,Y39 Y750 PAT750 9 8 U31ART (2) -- -- Y46 -- 9 4.33 [110] U31ART (2) Y48BH U31ART (2) P35D(1) P48PR-1 -- lllllllll TIN NONE TIN NONE .39 [10] 1.11 [28] .63 [16] 3.87 [98] .39 [10] .39 [10] .63 [16] 2.12 [54] PLATING .63 [16] .39 [10] .39 [10] .39 [10] .39 [10] C31ART (1) C35D(1) Y48PR-1 Y60 MECHANICAL HYDRAULIC FIG. FIG. FIG. FIG. 3 3 FIG. 1 TIN NONE 3 FIG. 2 FIG. 2 TIN 3 FIG. 1 TIN 3 FIG. 2 TIN 3 FIG. 1 TIN 3 FIG. 1 3 FIG. 2 TIN Y81KFT (3) PAT81KFT (3) Y644 (1) PAT644 (1) Y444 (1) PAT444 (1) -- -- llllllll C B 51953 YR SS D 4 N O.D STRIP LENGTH END PLUG COLOR CODED TO MATCH CRIMP DIE L 2X n K E C 1- HOLE DESIGN K B 2 1/8" C O.D C N 2- HOLE DESIGN D lllllllll lllllllllll C'H'K. L O.D YA31A2 BROWN DIE 299 BURNDY YA31A1 lllllllllll BY D (T) N ECO TYP.LETTERING AS SHOWN 350 kcmil AL9CU lllllllll DESCRIPTION USE KNURLED GUIDE LINES FOR CRIMP SPACING D -- DATE 1 BA 2019-08-13 00:00:00 EDT UPDATED AS PER MARKUP 1 2 1 2 3 2 REV 13 TIN .39 [10] DIELESS (#CRIMPS) Y45 7 .44 [11] (T) .39 [10] .44 [11] 4.85 [123] HYDRAULIC 9 .63 [16] 4.85 [123] INSTALLATION TOOLING (#CRIMPS) Y34A Y34B O.D. .44 [11] .44 [11] 3 BARREL INFORMATION LETTERING INFORMATION CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 350 kcmil AL9CU 6 ALUMINUM 4 DIE 229 CATALOG NUMBER 3 5 350 Kcmil 7 SD073935 YA31A1 DRAWING NO. DIE 229 B FIG. 1 NOTES: 1. ALL HYLUGS TM 2. REMOVE ALL EXCESS PENETROX 3 A TM UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. TM FOR USE B N D DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. . MILLIMETER , 90 $REF TRANSITION. 1- HOLE 90 $ .NO NEW HYPRESSES 11. UL LISTED WITH DLO COPPER CLAD ALUMINUM CONDUCTOR USING Y644 AND Y444 12 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 13 ENLARGED BARREL MARKING VIEWS. 8 90 $ L TM UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE REF TO ORDER BURNDY R ITEM NO: PRODUCTS CALL UNITED STATES 1-800-346-4175 (LONDONDERRY, NH) ARE BEING PROCESSED. TOOLS ONLY. 2- HOLE 90 $ DESIGN CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 7 DESIGN (T) Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. TM (T) H CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS 3.74 O.D B 5 9 13 WITH COPPER OR ALUMINUM CONDUCTOR. CONNECTOR BARRELS PREFILLED WITH PENETROX 8 B C FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 4 10 REV: PE0200 DEVELOPED LETTERING VIEWS ACCOMMODATE U.S. STANDARD WASHERS. FIG.2 6 5 4 3 2 CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM N/A YA31A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION -SIZE Sales Released D SCALE: 1:1 DRAWING NO REV SD073935 SHEET 12 OF 24 1 BA A 4 DRAWING NO. SD073935 CATALOG NUMBER 6 3 CONDUCTOR SIZE ALUMINUM COPPER STUD SIZE YA32A1 YA32A2 YA32A6 YA32A3 YA32A4 YA32A5 C D 1 2.26 [57] 2.26 [57] 1.62 [41] 1.62 [41] 1.88 [48] 1.88 [48] DIE INDEX OUR840 GREEN DIE SET 472 C MD6 -- NEST INDENTOR 1.89 2.26 1.62 [48] [57] [41] 2.64 [67] 2 10 9 -- -- --- K L N .69 [18] .56 [14] 4.92 [125] 4.92 [125] .88 [22] .88 [22] O.D 1.19 [30] 1.00 4.93 [25] .44 [125] .44 1.75 [11] 5.68 [11] [44] [144] -- Y34A Y34B -- 9 HYDRAULIC Y35,Y39 9 9 Y750 Y46 Y45 7 8 PAT750 U32ART U32ART U32ART (4) (4) (4) (T) PLATING .43 [11] .43 [11] TIN NONE 3 TIN 3 TIN 3 TIN 3 .43 [11] .43 [11] -- P35D(1) P48PR-1 -- -- Y48BH Y60 HYDRAULIC -- Y81KFT (4) PAT81KFT (4) Y644 (1) PAT644 (1) Y444 (1) PAT444 (1) L32ART (2) C35D(1) Y48PR-1 BURNDY 400 Kcmil DIE 472 L B -- (T) TYP.LETTERING AS SHOWN N C'H'K. SS STRIP LENGTH 2 1/2" D N 2X E C n K C B ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX TM FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. TM 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 9 BY YR END PLUG COLOR CODED TO MATCH CRIMP DIE NOTES: 8 ECO 51953 O.D 1- HOLE DESIGN TM UPDATED AS PER MARKUP 2- HOLE DESIGN B 1. ALL HYLUGS DESCRIPTION 4 D REV: PE0200 MECHANICAL DATE 2019-08-13 00:00:00 EDT 1 D USE KNURLED GUIDE LINES FOR CRIMP SPACING C A NONE DIELESS (#CRIMPS) C32AR (2) REV BA INFORMATION 5 BURNDYR INSTALLATION TOOLING (#CRIMPS) MECHANICAL TYPE n E 2.26 1.62 3.11 1.75 .56 6.15 .63 [57] [41] [79] [44] [14] [156] [16] 1/2 3/8 DIE INFORMATION GREEN B 1/2 400 kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT YA32A7 COLOR CODE NO.OF. HOLES 5/8 400 kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW 2 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] YA32A1 D 3 MILLIMETER , TRANSITION. CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. TM 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 4 .NO NEW HYPRESSES TM ARE BEING PROCESSED. 3 UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TO ORDER BURNDY R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA32A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 13 OF 24 BA 8 ALUMINUM STUD SIZE COPPER YA34A1 YA34A2 D YA34A7 1/2 3/8 500 kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT 1/2 3/8 YA34A10 3/8 PINK DIE INDEX 300 MECHANICAL TYPE OUR840 MD6 PINK DIE SET -- -- NEST INDENTOR 1 1/2 1/2 DIE INFORMATION 2 3/8 YA34A8 COLOR CODE 1 1/2 YA34A3 YA34A4 C NO.OF. HOLES 5/8 7 7 500 kcmil CLASS B YA34A5 CONCENTRIC COMPRESSED YA34A11 COMPACT SIW YA34A6 350 Kcmil YA34A9 CCA DLO (551/22) YA34A390 -- 5 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 2 B C D 2.34 [59] 2.34 [59] 2.34 [59] 2.34 [59] 2.34 [59] 2.34 [59] 2.34 [59] 2.34 [59] 2.34 [59] 2.34 [59] 1.80 [46] 1.80 [46] 1.62 [41] 1.80 [46] 1.80 [46] 1.80 [46] 1.80 [46] 1.62 [41] 1.80 [46] 1.80 [46] 1.91 [49] 1.37 [35] 3.15 [80] 1.89 [48] 2.27 [58] 3.15 [80] 1.18 [48] 3.15 [80] 3.15 [80] 2.64 [67] E H K .69 [18] .56 [14] .56 [14] .44 [11] .44 [11] .56 [14] .44 -- [11] 4.59 .56 [117] [14] -- .56 [14] .44 -[11] -- --1.75 [44] 1.00 [25] 1.38 [35] 1.75 [44] -1.75 [44] 1.75 [44] 1.75 [44] L 5.56 [141] 5.02 [128] 6.80 [173] 5.54 [141] 5.92 [150] 6.80 [173] 4.83 [115] 4.09 [104] 6.77 [172] 6.29 [160] N O.D (T) 12 11 Y34A Y34B 11 U34ART (4) -- -- -- -- Y46 U34ART (4) 11 Y48BH U34ART (4) C34AR (2) 9 P39D (1) P48PR-1 -- TIN NONE 3 TIN 3 TIN NONE 3 TIN 3 TIN 3 NONE Y60 -- C39D(1) Y48PR-1 -- UPDATED AS PER MARKUP ECO 51953 BY YR C'H'K. SS D TIN 3 TIN 3 TIN 3 USE KNURLED GUIDE LINES FOR CRIMP SPACING NONE C MECHANICAL L34ART (2) DESCRIPTION 6 DIELESS (#CRIMPS) Y45 DATE 2019-08-13 00:00:00 EDT PLATING .88 .46 [22] [12] .63 .46 [16] [12] .63 .46 [16] [12] .44 .46 [11] [12] .44 .46 1.32 [11] [12] [34] .63 .46 [16] [12] .44 .46 [11] [12] .63 .46 [16] [12] .63 .46 [16] [12] .44 .46 [11] [12] BURNDYR INSTALLATION TOOLING (#CRIMPS) HYDRAULIC Y35,Y39 11 Y750 10 PAT750 REV BA INFORMATION 1 HYDRAULIC BURNDY 3 CONDUCTOR SIZE 2 500 Kcmil CATALOG NUMBER 3 YA34A1 SD073935 DIE 300 4 DRAWING NO. STRIP LENGTH Y81KFT (4) PAT81KFT (4) Y644 (1) 2 5/8" PAT644 (1) Y444 (1) PAT444 (1) TYP.LETTERING AS SHOWN L C 4 B D (T) N O.D NOTES: 1. ALL HYLUGS B REV: PE0200 A TM ACCOMMODATE U.S. STANDARD WASHERS 1- HOLE DESIGN B TM 2. REMOVE ALL EXCESS PENETROX FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. D 3 UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. MILLIMETER , T REF. NO-OX-ID "A" COATED TO PREVENT FORMATION OF OXIDATION 7 CAN BE MOUNTED SIDE BY SIDE ON 4 -HOLE NEMA PAD. 8 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 9 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 10 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 11 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES 13. UL LISTED WITH DLO COPPER CLAD ALUMINUM CONDUCTOR USING Y644 AND 14 n K B C TRANSITION. 2- HOLE DESIGN UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TO ORDER BURNDY TM Y444 TOOLS ONLY. R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) ARE BEING PROCESSED. ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 4 E N H REF. 2X TM 6 12 END PLUG COLOR CODED TO MATCH CRIMP DIE CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA34A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 14 OF 24 BA 1 2.47 1.97 1.88 [63] [50] [48] .69 5.82 .88 [18] [148] [22] .52 [13] D 1/2 2 2.47 1.62 3.15 1.75 .56 7.09 .63 [63] [41] [80] [44] [14] [180] [16] .52 [13] 1/2 2 3/8 2 1/2 1 5/8 1 1/2 2 2.47 [63] 2.47 [63] 2.47 [63] 2.47 [63] 2.47 [63] .52 [13] .52 [13] .52 [13] .52 [13] .52 [13] YA36A2 YA36A3 6 YA36A4 6 600 kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW YA36A3NT131 6 YA36A5 500 Kcmil CCA DLO (779/22) YA36A8 YA36A10 600 kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT YA36A17 C COLOR CODE BLACK DIE INFORMATION DIE INDEX 473 OUR840 BLACK DIE SET -- NEST INDENTOR -- 1.31 [33] 1.97 [50] 1.97 [50] 1.97 [50] 1.97 [50] D E -- 3.15 [80] 1.89 [48] 1.69 [43] 1.88 [48] 3.15 [80] L K 1.75 [44] 1.00 [25] .56 [14] .44 [11] .56 -[14] .65 -[17] 1.75 .56 [44] [14] 7.09 [180] 5.64 [143] 5.64 [143] 5.82 [148] 7.06 [179] N O.D (T) .63 [16] 1.44 .69 [37] [18] .69 [18] .88 [22] .63 [16] BURNDYR INSTALLATION TOOLING (#CRIMPS) MECHANICAL TYPE C MD6 12 11 --- Y34A Y34B 11 --- Y35,Y39 Y750 PAT750 U36ART (4) -- Y45 Y48BH Y60 U36ART U36ART (4) (4) C36AR (2) L36ART (2) 10 Y46 11 9 P44D(2) P48PR-1 -- TIN FIG. 1 3 NONE FIG. 1 TIN FIG. 2 NONE FIG. 1 TIN FIG. 1 TIN FIG. 1 3 TIN FIG. 1 3 TIN FIG. 1 3 TIN FIG. 2 3 C44D(2) Y48PR-1 -- ECO 51953 UPDATED AS PER MARKUP BY YR C'H'K. SS D 3 llllllllllll llllllll llllllll llllllllllll 3 llllllllllll llllllll llllllll lllllllll lllllllll lllllllllll lllllllllll llllllllll lllllllll lllllllll lllllllllll lllllllllll llllllllll llllllllllll FIG. 2 FIG. 1 BARREL 15 LETTERING VIEW DIELESS (#CRIMPS) HYDRAULIC 11 PLATING DESCRIPTION BURNDY YA36A1 5/8 YA36A1 B 15 DIE 473 COPPER NO.OF. HOLES DATE 2019-08-13 00:00:00 EDT BLACK DIE 473 ALUMINUM n STUD SIZE BARREL LETTERING INFORMATION REV BA YA36A1 8 INFORMATION 1 600 kcmil AL9CU 3 5 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 600 kcmil CONDUCTOR SIZE 2 BURNDY YA36A1 CATALOG NUMBER 3 DIE 473 SD073935 BLACK DIE 473 4 DRAWING NO. MECHANICAL HYDRAULIC -- Y81KFT (4) PAT81KFT (4) Y644 (1) PAT644 (1) Y444 (1) PAT444 (1) C USE KNURLED GUIDE LINES FOR CRIMP SPACING STRIP LENGTH C BARREL LETTERING VIEW 15 SEE TABLE 2 7/8" 4 L N (T) B D O.D NOTES: 1. ALL HYLUGS B TM ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX 3 TM 1- HOLE DESIGN FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 CAN BE MOUNTED SIDE BY SIDE ON FOUR HOLE NEMA PAD 7 THE REV: PE0200 B 2X n K BARREL LETTERING VIEW 15 SEE TABLE MILLIMETER , C YA39A12 IS NOT UL LISTED OR CSA CERTIFIED 9 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 10 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 11 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 12 E N TM 8 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE A D END PLUG COLOR CODED TO MATCH CRIMP DIE FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TO ORDER BURNDY TM ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 15 ENLARGED BARREL MARKING VIEW. 4 TOOLS ONLY. R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) ARE BEING PROCESSED. 13. UL LISTED WITH DLO COPPER CLAD ALUMINUM CONDUCTOR USING Y644 AND Y444 14 2- HOLE DESIGN TRANSITION. CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 3 2 UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA36A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 15 OF 24 BA ALUMINUM CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] STUD NO.OF. SIZE HOLES COPPER YA39A1 15 700 -750 kcmil CLASS B YA39A3 15 CONCENTRIC YA39A4 COMPRESSED YA39A5 15 6 COMPACT SIW 700 -750 kcmil YA39A6 6 CLASS B,C CONCENTRIC 900 kcmil YA39A7 15 COMPRESSED CLASS B 13 COMPACT COMPACT YA39A12 15 8 ONLY YA39A2 YA39A13 15 YA39A34 16 600 Kcmil CCA DLO (925/22) COLOR DIE INFORMATION CODE DIE TYPE INDEX C 936 1 5/8 1 1/2 2 3/8 2 1/2 2 1/2 2 3/4 MECHANICAL OUR840 YELLOW DIE SET YELLOW 1/2 NEST INDENTOR BURNDY 12 MD6 -- 11 -- -- 1 -- C D 2.46 2.05 1.34 [62] [52] [34] 2.46 2.05 1.88 [62] [52] [48] n E K --- L N O.D .56 5.26 .63 [14] [134] [16] .69 5.80 .88 [18] [147] [22] 1.46 [37] (T) PLATING .43 [11] TIN 3 TIN 3 TIN 3 2.46 1.62 3.15 1.75 .56 7.07 .63 [62] [41] [80] [44] [14] [180] [16] 1.46 [37] 2.46 2.05 1.89 1.00 .44 5.81 .44 [62] [52] [48] [25] [11] [148] [11] 2.46 1.62 6.33 1.75 .56 10.25 .63 1.46 [62] [41] [161] [44] [14] [260] [16] [37] 2.46 2.05 3.15 1.75 .56 7.04 .63 1.46 [62] [52] [80] [44] [14] [179] [16] [37] 2.46 2.05 2.19 [62] [52] [56] -- R -- -- -- -- NONE .43 [11] Y60 .43 [11] TIN 3 TIN 3 TIN 3 TIN 3 -- HYDRAULIC -- Y81KFT (4) PAT81KFT (4) Y644 (1) PAT644 (1) Y444 (1) PAT444 (1) -- C 1. 2. 3 REV: PE0200 A ALL HYLUGS TM REMOVE ALL EXCESS PENETROX 4 O.D N WITH COPPER OR TM 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 CAN BE MOUNTED SIDE BY SIDE ON FOUR HOLE NEMA PAD 7 THE YA39A12 IS NOT UL LISTED OR CSA CERTIFIED 8 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 9 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 10 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 11 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. MILLIMETER , 1- HOLE DESIGN 2X E END PLUG COLOR CODED TO MATCH CRIMP DIE n K 2- HOLE DESIGN CABLE ENTRY C B 15 12 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM . NO NEW HYPRESSES TM ARE BEING PROCESSED. 13 USE PAT644, Y644, PAT444, OR Y444 TOOLING ONLY WHEN INSTALLING 900 KCMIL APPLY 2 CRIMPS. COMPACT AL. 14. UL LISTED WITH DLO COPPER CLAD ALUMINUM CONDUCTOR USING Y644 TOOLS ONLY. 15 SEE DEVELOPED LETTERING VIEW FOR THESE CATALOGS. 16 SEE DEVELOPED LETTERING VIEW FOR YA39A34. 17. ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. TO ORDER BURNDY TRANSITION. R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE 3 C 2 7/8" N Y644 (2) ONLY 900 kcmil CMPT AL9 DIE 936 OR Y644 (1) BURNDY YA39A1 DEVELOPED LETTERING VIEW FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) FOR USE ALUMINUM CONDUCTOR. APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 D 16 ACCOMMODATE U.S. STANDARD WASHERS TM 750 kcmil AL9CU YELLOW DIE 936 BURNDY 750 kcmil AL9CU YELLOW DIE 936 BURNDY YA39A34 NOTES: DEVELOPED LETTERING VIEW FOR YA39A34 C'H'K. SS D D B BY YR B STRIP LENGTH (T) CABLE ENTRY ECO 51953 TYPE LETTERING AS SHOWN L MECHANICAL L39ART-2 (2) -- DESCRIPTION UPDATED AS PER MARKUP USE KNURLED GUIDE LINES FOR CRIMP SPACING DIELESS (#CRIMPS) Y48BH DATE 2019-08-13 00:00:00 EDT NONE .43 [11] .43 [11] .43 [11] .81 6.17 1.00 1.46 [21] [157] [25] [37] HYDRAULIC Y35,Y39 11 11 Y46 Y45 11 Y750 9 10 PAT750 U39ART-2 U39ART-2 U39ART-2 (4) (4) (4) NONE .43 [11] INSTALLATION TOOLING (#CRIMPS) Y34A Y34B -- B REV BA INFORMATION 5 1 BURNDY 8 3 D CONDUCTOR SIZE 2 700 Kcmil CATALOG NUMBER 3 YA39A1 SD073935 DIE 936 4 DRAWING NO. FOR PRODUCT INFO: http://www.burndy.com 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUGTM NA YA39A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 2:1 DRAWING NO REV SD073935 SHEET 16 OF 24 BA 7 YA39AM2 6 7 YA39AM3 6 7 COLOR CODE C RED STUD NO.OF. SIZE HOLES COPPER 700 -750 kcmil CLASS B CONCENTRIC COMPRESSED 700 -750 kcmil COMPACT CLASS B,C SIW CONCENTRIC 14 COMPRESSED COMPACT 900 kcmil CLASS B COMPACT ONLY DIE INFORMATION DIE INDEX 301 MECHANICAL TYPE OUR840 MD6 RED DIESET -- -- NEST INDENTOR -- 5/8 1/2 1/2 B C D 2.56 2.19 1.85 [65] [56] [47] 1 2 2 n E L K N O.D (T) .57 [14] TIN 2.56 1.69 3.12 1.75 .56 7.31 .63 1.60 [65] [43] [79] [44] [14] [186] [16] [41] .57 [14] TIN 3 2.56 1.69 3.88 1.75 .56 8.07 .63 1.60 [65] [43] [99] [44] [14] [205] [16] [41] .57 [14] TIN 3 13 12 -- Y34A Y34B -- -- 12 -- -- Y46 12 Y48BH Y60 P39ART (4) S39ART (4) C39AR (4) L39ART (4) P45D(2) P48PR-1 -- C45D(2) Y48PR-1 3 REMOVE ALL EXCESS PENETROX TM C HYDRAULIC -- Y81KFT (4) PAT81KFT (4) Y644 (1) PAT644 (1) Y444 (1) PAT444 (1) -- L STRIP LENGTH UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. FOR USE N 1- HOLE DESIGN END PLUG COLOR CODED TO MATCH CRIMP DIE 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 CAN BE MOUNTED SIDE BY SIDE ON FOUR HOLE NEMA PAD 7 USE ONLY WHEN CUSTOMER REQUIRES 1.600 O.D VARIATION FOR COMPATABILITY WITH TOOLING ,FOR ALL OTHER APPLICATION USE C39-1 TUBING(1.460 O.D) 8 THE YA39A12 IS NOT UL LISTED OR CSA CERTIFIED 9 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE MILLIMETER , DIE 301 E DIE 301 12 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 13 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM REV: PE0200 . NO NEW HYPRESSES TM ARE BEING PROCESSED. 14 USE PAT644, Y644, PAT444, OR Y444 TOOLING ONLY WHEN INSTALLING 900 KCMIL APPLY 2 CRIMPS. 15 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 16 SEE DEVELOPED LETTERING VIEW FOR CATALOGUE YA39AM2 OLD INSTALATION R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) TRANSITION. CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) 3 B 11 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. FOR PRODUCT INFO: http://www.burndy.com 4 K 2- HOLE DESIGN 16 TO ORDER BURNDY CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 2X C RED 900 COMPACT AL 750 kcmil AL9CU DIE 301 TM CONNECTOR BARRELS PREFILLED WITH PENETROX C O.D. 2 7/8" CABLE ENTRY WITH COPPER OR ALUMINUM CONDUCTOR. D 4 B D N FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 4 10 RED BURNDY YA39AM2 2. SS 16 MECHANICAL DEVELOPED LETTERING VIEW ACCOMMODATE U.S.STANDARD WASHERS ALL HYLUGS 3 A TM 1. YR C'H'K. TYPE LETTERING AS SHOWN D NOTES: BY 51953 UPDATED AS PER MARKUP (T) B ECO USE KNURLED GUIDE LINES FOR CRIMP SPACING DIELESS (#CRIMPS) Y45 10 2019-08-13 00:00:00 EDT K BURNDYR INSTALLATION TOOLING (#CRIMPS) HYDRAULIC Y35,Y39 12 Y750 11 PAT750 DESCRIPTION PLATING .69 6.04 .88 1.60 [18] [153] [22] [41] -- BA DATE BURNDY YA39AM1 ALUMINUM REV 700/750 Kcmil D 9 INFORMATION 5 BURNDY 3 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 1 700/750 Kcmil CONDUCTOR SIZE 2 YA39AM1 CATALOG NUMBER 3 DIE 301 SD073935 YA39AM2 4 DRAWING NO. 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: COMPACT AL. HYLUGTM NA YA39A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 17 OF 24 BA CATALOG NUMBER D YA40A1 YA40A2 YA40A3 YA40A4 COLOR CODE C CONDUCTOR SIZE 6 3 ALUMINUM 800 kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW DIE INDEX 474 2 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] COPPER DIE INFORMATION GRAY 3 STUD SIZE 800 kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT MECHANICAL NO.OF. HOLES B C D 1 2.56 [65] 1.65 [42] 2.25 [57] 1.87 [47] 2 2.56 [65] 2.25 [57] 3.16 1.75 [80] [44] 5/8 1/2 E F -- L K 5 N -- .69 6.12 .88 [18] [155] [22] -- .56 7.41 .63 [14] [188] [16] BURNDYR INSTALLATION TOOLING (#CRIMPS) 10 Y34A Y34B TYPE OUR840 MD6 GRAY DIE SET -- -- -- NEST INDENTOR -- -- -- 9 9 HYDRAULIC Y35,Y39 9 Y750 Y46 8 PAT750 P40ART -(4) -- 9 7 Y45 S40ART (4) P45D(4) P48PR-1 -- O.D 1.65 [42] (T) .60 [15] .60 [15] C40AR (2) Y60 TIN C45D(2) Y48PR-1 TIN UPDATED AS PER MARKUP ECO 51953 BY YR C'H'K. SS 3 D 3 NONE HYDRAULIC -- Y644MBH (1) ONLY Y444 (1) PAT444 (1) -- DESCRIPTION NONE MECHANICAL L40ART (2) DATE 2019-08-13 00:00:00 EDT PLATING DIELESS (#CRIMPS) Y48BH REV BA INFORMATION 1 USE KNURLED GUIDE LINES FOR CRIMP SPACING STRIP LENGTH TYPE LETTRING AS SHOWN 3" C 800 Kcmil BURNDY SD073935 DIE 474 YA40A1 4 DRAWING NO. C L 4 B D N (T) B O.D 1- HOLE DESIGN NOTES: 1. ALL HYLUGS TM 2X D N ACCOMMODATE U.S. STANDARD WASHERS n K B END PLUG COLOR CODED TO MATCH CRIMP DIE E TM 2. REMOVE ALL EXCESS PENETROX FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 REV: PE0200 A UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. TM 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 4 C TM .NO NEW HYPRESSES MILLIMETER , 2- HOLE DESIGN TRANSITION. TO ORDER BURNDY R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) TM ARE BEING PROCESSED. CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 3 2 UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA40A-&YA44A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 18 OF 24 BA D 7 ALUMINUM YA42A3 YA42A5 3 900 kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW YA42A4 6 STUD NO.OF. SIZE HOLES COPPER 3 YA42A1 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 600 kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT YA42A7 COLOR CODE C DIE INDEX GRAY 303 MECHANICAL TYPE OUR840 MD6 DIE SET -- -- NEST INDENTOR -- -- C D E n L K N O.D (T) PLATING .39 [10] TIN 3 1 2.46 2.14 1.36 [62] [54] [35] -- .56 5.32 .63 1.50 [14] [135] [16] [38] 5/8 1 2.46 2.14 [62] [54] 1.86 [47] -- .69 5.82 .88 1.50 .39 [18] [148] [22] [38] [10] TIN 3 5/8 1 2.46 1.62 1.86 [62] [41] [47] -- .69 5.82 .88 1.50 [18] [148] [22] [38] .39 [10] TIN 3 1/2 2 2.46 1.62 3.13 1.75 .56 7.09 .63 1.50 [62] [41] [79] [44] [14] [180] [16] [38] .39 [10] TIN 3 2 2.46 2.14 [62] [54] 2.00 1.00 .44 5.96 .44 1.50 .39 [51] [25] [11] [151] [11] [38] [10] TIN BURNDYR INSTALLATION TOOLING (#CRIMPS) 11 10 Y34A Y34B -- HYDRAULIC 10 Y35,Y39 10 Y750 Y46 9 PAT750 U42ART (4) U42ART (4) -- -- 10 U42ART (4) -- -- Y48BH -- -- Y60 MECHANICAL --- -- HYDRAULIC Y644 (2) PAT644 (2) Y444 (2) PAT444 (2) DATE DESCRIPTION ECO 51953 UPDATED AS PER MARKUP 2019-08-13 00:00:00 EDT K BY YR TYPE LETTRING AS SHOWN STRIP LENGTH L B 2 7/8" 4 O.D. 1- HOLE DESIGN END PLUG COLOR CODED TO MATCH CRIMP DIE D N REV: PE0200 A TM C D (T) B SS D N NOTES: C'H'K. USE KNURLED GUIDE LINES FOR CRIMP SPACING C 3 DIELESS (#CRIMPS) Y45 8 REV BA 1/2 3/8 DIE INFORMATION B INFORMATION 5 1 BURNDY 3 CONDUCTOR SIZE 2 900 Kcmil CATALOG NUMBER 3 YA42A1 SD073935 DIE 303 4 DRAWING NO. E 2X K B ACCOMMODATE U.S. STANDARD WASHERS 1. ALL HYLUGS 2. REMOVE ALL EXCESS PENETROX 3 UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) U42ART DIE IS FOR 900 Kcmil AL ONLY. Y644 TOOL IS FOR 600-900 Kcmil AL OR 600 Kcmil COPPER. TM FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 2- HOLE DESIGN TM 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 CAN BE MOUNTED SIDE BY SIDE ON FOUR HOLE NEMA PAD 7 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 8 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 9 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 10 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. TM 11 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS 12 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 4 C . NO NEW HYPRESSES TM MILLIMETER , UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TRANSITION. ARE BEING PROCESSED. TO ORDER BURNDY R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA39A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 19 OF 24 BA D YA44A1 ALUMINUM STUD SIZE COPPER YA44A3 13 13 YA44A5 13 YA44A6 13 YA44A7 13 YA44A8 13 750 Kcmil 800 Kcmil CCA DLO (1184/22) (1258/22) 1000 kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT 1/2 1/2 1/2 1/2 BROWN DIE SET 302 C D 1 2.74 [70] 2.50 [64] 1.89 [48] 2 2.74 [70] 1/2 5/8 MECHANICAL COLOR DIE INFORMATION CODE DIE TYPE OUR840 MD6 INDEX BROWN B 1/2 YA44A9 13 C NO.OF. HOLES 5/8 1000 kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW NEST INDENTOR 5 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] 13 YA44A2 YA44A4 CONDUCTOR SIZE -- -- -- -- 2.74 [70] 2.74 4 [70] 2.74 1 [70] 2.74 2 [70] 2.74 2(SLOTS) [70] 2 E F -- -- L K N O.D 7.76 .63 [197] [16] 7.51 [191] 7.76 [197] 6.50 [165] 7.76 [197] 7.76 [197] 9 Y34A Y34B 10 --- -- 7 .55 [14] .63 .55 1.84 [16] [14] [47] .63 .53 [16] [13] .88 .55 [22] [14] .63 .66 [16] [17] .63 .55 [16] [14] Y48BH S44ART (4) C44AR (2) -- F46D(2) Y48PR-1 NO NEST (2) P48PR-1 Y60 TIN TIN 51953 UPDATED AS PER MARKUP lllllllllll lllllllll B 3 TIN 3 TIN 3 TIN 3 TIN 3 -- REV: PE0200 DEVELOPED LETTERING VIEW ACCOMMODATE U.S. STANDARD WASHERS SS D N C E B F O.D STRIP LENGTH C 3 1/8" 4X n K 4-HOLE DESIGN .56 [14] .25 [6] C 13 B E N FROM CONNECTOR AND 2. REMOVE ALL EXCESS PENETROX ADJACENT CONDUCTOR PRIOR TO TAPING. D UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 90 C (AL9CU) FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. APPROVAL APPLY TO TIN PLATED L CONNECTORS ONLY. 4 B TM 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM 11. UL LISTED WITH DLO COPPER CLAD ALUMINUM CONDUCTOR USING Y644MBH AND 12 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 13 SEE DEVELOPED LETTERING VIEW FOR THESE CATALOGS. 4 YR L 3 TM 3 A TM C'H'K. D NOTES: 1. ALL HYLUGS BY 3 TIN Y644MBH (1) ONLY Y444 (1) PAT444 (1) lllllllll BROWN DIE 302 2019-08-13 00:00:00 EDT ECO llllllll lllllllll lllllllllll BURNDY YA44A3 DESCRIPTION NONE HYDRAULIC -- BA DATE NONE MECHANICAL L44ART (2) REV 1 PLATING DIELESS (#CRIMPS) Y45 9 (T) .66 [17] BURNDYR INSTALLATION TOOLING (#CRIMPS) HYDRAULIC Y35,Y39 8 Y750 9 Y46 9 PAT750 P44ART -(4) INFORMATION .69 6.50 .88 [18] [165] [22] 1.65 .56 [42] 3.15 1.75 -[14] 2.50 [80] [44] [64] 1.65 2.90 1.50 .56 -[42] [74] [38] [14] 3.03 3.15 1.75 1.75 .56 [77] [80] [44] [44] [14] 1.46 1.89 --.69 [37] [48] [18] 2.50 3.15 1.75 .56 -[64] [80] [44] [14] 1.65 3.15 1.75 -- (SLOT) [42] [80] [44] 2 1000 Kcmil BURNDY CATALOG NUMBER 3 1000 kcmil AL9CU SD073935 DIE 302 YA44A9 4 DRAWING NO. MILLIMETER , TRANSITION. O.D T 2-SLOT DESIGN TO ORDER BURNDY ARE BEING PROCESSED. Y444/PAT444 TOOLS ONLY. R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM N/A YA44A- (SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 20 OF 24 BA CATALOG NUMBER D CONDUCTOR SIZE 6 3 ALUMINUM YA45A2 YA45A5 YA45A6 YA45A3 YA45A4 1/2 1250 kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT 900 Kcmil 1000 Kcmil CCA DLO (1406/22) (1554/22) YA45A7 YA45A8 NO.OF. HOLES STUD SIZE 2 DIE INDEX TYPE BROWN DIE SET BROWN 302 C NEST INDENTOR L N O.D (T) -- .56 8.72 .63 [14] [221] [16] 2.26 [57] .93 [24] TIN 3 -- .56 7.73 .63 [14] [196] [16] 1.84 [47] .51 [13] TIN 3 3 NONE 1/2 2.26 [57] .93 [24] TIN 2.74 3.03 3.12 1.75 [70] [77] [79] [44] 1.75 .56 7.73 .63 [44] [14] [196] [16] 1.84 [47] .43 [11] TIN 4 BURNDY 10 9 Y34A Y34B 9 -- -- NONE NONE 9 -- -- Y46 8 -- 9 Y48BH P44ART (4) S44ART (4) C44AR (2) NO NEST (2) P48PR-1 -- Y60 MECHANICAL -- ECO 51953 BY YR C'H'K. SS D HYDRAULIC STRIP LENGTH 2X N L44ART (2) F46D(2) Y48PR-1 UPDATED AS PER MARKUP 3 DIELESS (#CRIMPS) Y45 7 DESCRIPTION NONE INSTALLATION TOOLING (#CRIMPS) HYDRAULIC Y35,Y39 Y750 PAT750 DATE 2019-08-13 00:00:00 EDT 1 PLATING 1.75 .56 8.72 .63 [44] [14] [221] [16] -- -- n K F 3.30 3.03 3.12 1.75 [84] [77] [79] [44] MD6 -- E 1/2 MECHANICAL OUR840 D REV BA INFORMATION 2.74 2.59 3.12 1.75 [70] [66] [79] [44] 1/2 DIE INFORMATION C 3.30 3.03 3.12 1.75 [84] [77] [79] [44] R COLOR CODE B 2 5 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] COPPER 1250 kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW YA45A1 3 -- Y644MBH (1) ONLY n K E 3 1/8" C C 1250 Kcmil BURNDY SD073935 DIE 302 YA45A1 4 DRAWING NO. D B NOTES: 4-HOLE DESIGN TM 3 4X ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX REV: PE0200 F L TM N FOR USE WITH DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. MILLIMETER , UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TRANSITION. TO ORDER BURNDY TM .NO NEW HYPRESSES TM ARE BEING PROCESSED. Y444/PAT44 TOOLS ONLY. 3 PRODUCTS CALL CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 4 R UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 11. UL LISTED WITH DLO COPPER CLAD ALUMINUM CONDUCTOR USING Y644MBH AND 12 COPPER OR ALUMINUM CONDUCTOR. 2- HOLE DESIGN 5 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS B END PLUG COLOR CODED TO MATCH CRIMP DIE TM CONNECTOR BARRELS PREFILLED WITH PENETROX 10 O.D n K 4 9 D FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 70C (AL7CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 B (T) 1. ALL HYLUGS A DIE 302 YA45A7 C 1250 Kcmil BURNDY E N 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA45A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 21 OF 24 BA 4 DRAWING NO. SD073935 CATALOG NUMBER 3 D YA46A1 YA46A2 YA46A3 YA46A4 YA46A5 YA46A6 COLOR CODE BLUE 6 3 CONDUCTOR SIZE ALUMINUM 1500 Kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW 1500 Kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT DIE INFORMATION DIE INDEX TYPE 478 STUD SIZE OUR840 NEST INDENTOR --- NO.OF. HOLES 3/4 1/2 1/2 B C D n K E F -- -- .81 7.67 1.00 [21] [195] [25] .81 [21] TIN 3 -- .56 8.73 .63 [14] [222] [16] 2.26 .81 [57] [21] TIN 3 1.75 .56 8.73 .63 [44] [14] [222] [16] .81 [21] TIN 3 1 3.30 3.08 2.09 [84] [78] [53] 2 3.30 3.08 3.15 1.75 [84] [78] [80] [44] 4 3.30 3.08 3.15 1.75 [84] [78] [80] [44] L N MD6 10 9 Y34A Y34B -- 9 -- -- HYDRAULIC Y35,Y39 9 Y750 Y46 8 PAT750 -- -- 9 O.D (T) -- -- C46AR (2) -- -- Y48BH Y60 C46AD(2) Y48PR-1 -- L46ART (2) -- DATE DESCRIPTION 2019-08-13 00:00:00 EDT 1 UPDATED AS PER MARKUP ECO 51953 BY YR C'H'K. SS PLATING NONE NONE NONE D DIELESS (#CRIMPS) Y45 7 REV BA INFORMATION BURNDYR INSTALLATION TOOLING (#CRIMPS) MECHANICAL BLUE DIE SET 5 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] COPPER 2 MECHANICAL HYDRAULIC -- -- STRIP LENGTH 3 3/4" D N C 2x E n K C C 1500 Kcmil BURNDY DIE 478 YA46A1 USE KNURLED GUIDE LINES FOR CRIMP SPACING C TYPE LETTERING AS SHOWN 2- HOLE DESIGN D L (T) N 4 D N B B E O.D C B F NOTES: 1. ALL HYLUGS TM ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX 3 REV: PE0200 A TM 1- HOLE DESIGN UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 70C (AL7CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. FOR USE 4X n K WITH COPPER OR ALUMINUM CONDUCTOR. TM CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. TM 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS .NO NEW HYPRESSES 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. TM UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE MILLIMETER , TRANSITION. TO ORDER BURNDY Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 4 4-HOLE DESIGN FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 4 9 END PLUG COLOR CODED TO MATCH CRIMP DIE ARE BEING PROCESSED. 3 R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA46A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 22 OF 24 BA 4 DRAWING NO. SD073935 CATALOG NUMBER 6 3 D YA47A1 YA47A2 YA47A3 YA47A4 YA47A5 YA47A6 COLOR CODE WHITE 3 CONDUCTOR SIZE ALUMINUM 1750 Kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW DIE INDEX 587 CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] COPPER 1750 Kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT DIE INFORMATION TYPE WHITE DIE SET NEST INDENTOR 2 STUD SIZE 3/4 1/2 1/2 B C D n K E F L N -- -- .81 7.51 1.00 [21] [191] [25] .88 [22] TIN 3 2.44 .88 [62] [22] TIN 3 .88 [22] TIN 3 1 3.92 3.32 2.09 [100] [84] [53] 2 3.92 3.32 3.14 1.75 [100] [84] [80] [44] -- .56 8.56 .63 [14] [217] [16] 4 3.92 3.32 3.14 1.75 1.75 [100] [84] [80] [44] [44] .56 8.56 .63 [14] [217] [16] O.D (T) BURNDY R INSTALLATION TOOLING (#CRIMPS) MECHANICAL OUR840 NO.OF. HOLES MD6 10 9 Y34A Y34B 9 HYDRAULIC Y35,Y39 Y750 PAT750 9 Y46 8 9 7 Y488H -- -- -- -- -- -- -- -- -- -- -- -- -- -- Y60 NONE NONE NONE MECHANICAL HYDRAULIC L47ART (2) -- DATE DESCRIPTION 2019-08-13 00:00:00 EDT UPDATED AS PER MARKUP ECO 51953 BY YR C'H'K. SS PLATING DIELESS (#CRIMPS) Y45 REV BA INFORMATION 5 1 -- -- D STRIP LENGTH 4 3/8" L USE KNURLED GUIDE LINES FOR CRIMP SPACING DIE 587 YA47A1 C 2X n K C 1750 kcmil BURNDY C E N C TYPE LETTRING AS SHOWN 2- HOLE DESIGN D L B B N NOTES: TM O.D REV: PE0200 C B F ACCOMMODATE U.S. STANDARD WASHERS TM 2. REMOVE ALL EXCESS PENETROX FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. A N 4 D (T) 1. ALL HYLUGS E 1- HOLE DESIGN 3 UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 70C (AL7CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. FOR USE WITH COPPER OR ALUMINUM CONDUCTOR. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. 6 ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. 8 CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 9 Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 4-HOLE DESIGN 4X n K TM 10 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM MILLIMETER , UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TRANSITION. ARE BEING PROCESSED. TO ORDER BURNDY R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 11 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 4 END PLUG COLOR CODED TO MATCH CRIMP DIE 3 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA47A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:1 DRAWING NO REV SD073935 SHEET 23 OF 24 BA CATALOG NUMBER 3 D 3 CONDUCTOR SIZE 6 ALUMINUM CONNECTOR DIMENSIONS-LINEAR MEASURE IN,[mm] COPPER YA48A1 3/4 YA48A2 YA48A3 YA48A4 YA48A8 YA48A5 YA48A6 YA48A10 7 2000 Kcmil CLASS B CONCENTRIC COMPRESSED COMPACT SIW 2000 Kcmil CLASS B,C CONCENTRIC COMPRESSED COMPACT YA483A2 C RED DIE INFORMATION DIE INDEX 479 TYPE RED DIE SET NEST INDENTOR 4 -- 1/2 2 BURNDY MECHANICAL OUR840 3.69 [94] 3.69 [94] 1/2 -- MD6 11 10 R C D 2.60 [66] 3.57 [91] 3.00 [76] 3.11 [79] 3.69 3.57 3.05 [94] [91] [77] n K E F -- --- 3.69 3.57 3.11 1.75 [94] [91] [79] [44] 2 1/2 B 3.69 3.57 2.06 [94] [91] [52] 1 1/2 YA483A1 COLOR CODE NO.OF. HOLES STUD SIZE 1.75 [44] 1.75 [44] PLATING .81 7.44 1.00 [21] [189] [25] .80 [20] TIN 3 .56 8.49 .63 [14] [216] [16] .90 [23] TIN 3 .66 [17] 1.75 .56 [44] [14] -- -- 3.69 3.63 3.11 1.75 [94] [92] [79] [44] -- N O.D 8.40 [213] 8.49 [216] .55 [14] .63 [16] 8.49 [216] -- 2.60 [66] .90 [23] .90 [23] .90 [23] .56 8.49 .63 [14] [216] [16] -- INFORMATION 5 (T) -- L .79 [20] INSTALLATION TOOLING (#CRIMPS) Y34A Y34B HYDRAULIC Y35,Y39 10 Y750 Y46 9 PAT750 10 10 Y488H Y60 -- -- -- -- -- -- -- L48ART (2) -- -- -- -- -- -- -- -- D 2X E N NONE NONE TIN NONE TIN NONE REV BA DATE DESCRIPTION 2019-08-13 00:00:00 EDT TIN 1 UPDATED AS PER MARKUP ECO 51953 BY YR C'H'K. SS D 3 3 NONE USE KNURLED GUIDE LINES FOR CRIMP SPACING 3 NONE C DIELESS (#CRIMPS) Y45 8 2 MECHANICAL HYDRAULIC -- -- STRIP LENGTH 2000 Kcmil BURNDY SD073935 DIE 479 YA46A1 4 DRAWING NO. TYPE LETTRING AS SHOWN C 4 1/8" L 4 B n K D N (T) O.D C 1- HOLE DESIGN B NOTES: 1. ALL HYLUGS TM 2- HOLE DESIGN REV: PE0200 TM UL LISTED AND CSA CERTIFIED WIRE CONNECTORS. RATED 70C (AL7CU) APPROVAL APPLY TO TIN PLATED CONNECTORS ONLY. 4 CONNECTOR BARRELS PREFILLED WITH PENETROX 5 DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS ROUNDED OFF TO THE NEAREST UNLESS OTHERWISE NOTED,AND ARE FOR REFERENCE ONLY. FOR USE WITH ADD SUFFIX "DT" TO ORDER LUGS WITH CRIMP BARREL SEALED AIR TIGHT INSIDE THE 7 THIS CONNECTOR DESIGNED TO BE WELDED TO AN ALUMINIUM BUS AND WILL HAVE A BARE FINISH AND NO PENETROX 8 CATALOG #PT6515 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y45 SERIES TOOLS. C COPPER OR ALUMINUM CONDUCTOR. F 4X MILLIMETER , TRANSITION. UNINSULATED COMPRESSION TERMINAL MATERIAL: ALUMINUM TUBE TO ORDER BURNDY Y35P3 INDENTOR ADAPTOR REQUIRED FOR "Y34PR" TYPE INDENTORS. 11 FOR USE BY CUSTOMERS THAT HAVE THIS HYPRESS TM .NO NEW HYPRESSES TM ARE BEING PROCESSED. R PRODUCTS CALL UNITED STATES: 1-800-346-4175 (LONDONDERRY, NH) CANADA: 1-800-361-6975 (QUEBEC) 1-800-387-6487 (ALL OTHER PROVINCES) FOR PRODUCT INFO: http://www.burndy.com 12 ADD SUFFIX "U" TO ORDER LUGS WITH UNDRILLED TONGUE. 3 n K 4-HOLE DESIGN CATALOG #PUADP-1 ADAPTOR IS REQUIRED TO USE "U" DIES IN Y46 SERIES TOOLS. 4 B TM 6 10 E FROM CONNECTOR AND ADJACENT CONDUCTOR PRIOR TO TAPING. 3 9 N ACCOMMODATE U.S. STANDARD WASHERS 2. REMOVE ALL EXCESS PENETROX A END PLUG COLOR CODED TO MATCH CRIMP DIE D 2 ITEM NO: CAT. NO: DRAWN BY: CHECKER: DSN APPVL: MFG APPVL: QA APPVL: MKT APPVL: PROD FAM: PROJECT #: DOCUMENT TYPE: REL LEVEL: HYLUG TM NA YA48A-(SEE TABLE) E.S.K 7/21/72 S.F.P 8/01/72 R.B 8/02/72 --D.VARIO 6/18/95 P.WERTHMAN 6/18/95 CM&R COMPRESSION SIZE -Sales Released C 1 A SCALE: 1:2 DRAWING NO REV SD073935 SHEET 24 OF 24 BA

AL Terminal Lug SD..073935-01

Products

Support

AL Terminal Lug SD..073935-01

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib