Taizhou Huangyan Keshuo Mould & Plastic Co., Ltd Taizhou Huangyan Keshuo Mould & Plastic Co., Ltd Taizhou Huangyan Keshuo Mould & Plastic Co., Ltd is established in May 2003, located in Huangyan, Zhejiang, “ Hometown of Mould In China ”. We specialize in the design, development, and manufacture of various automotive parts, motorcycle parts, household appliances, a daily commodity, etc. Geely NL-5 Rear Bumper Assembly We have an advanced digital control machining center, employing senior technical talents, all adopting CAD/CAM computer-aided design, and manufacturing with CAE molding simulation analysis capabilities so that we achieve integrated service of mold design and manufacturing. Changan Eado Left Door Panel Good molds should be given priority in several major directions: 1.Structure (large direction): the product itself determines (undergraduate selection), three-sided two-state strength, process (processing, assembly, injection molding);; 2.Gate: pouring system (range ratio), affecting the appearance and internal quality of the product, affecting the process parameters (to be wide) when adjusting the machine;; 3.Waterway: mold temperature control system, affecting product quality, molding efficiency, mold life;; 4. Performance: reference acquisition, positioning and clamping, motion principle, balance principle, maintenance, failure analysis, etc.