NOEL JR. B. VECIDA
1 - (FOR LAYOUT SCALING)
1.
2.
3.
4.
1.
Ang set up na ito ay hindi 100% tulad ng nasa book. Ginawa ko to base sa book, yt tutorial, at experience.
Ginawa ko para sa sarili kung convenient. Share ko lang.
May dalawang process po ito, Kung alin gusto ninyo gawin kayo na bahala pumili.
Ito ay may dalawang category (1) PDF at (2) Direct to Printer.
Mahabang process lang po ito sa una pero after mo naman maset ang plotter at scale list madali nalang
every time na maplot ka.
RIGHT CLICK THE LAYOUT TAB. THEN CLICK “PAGE SETUP MANAGER”
NOEL JR. B. VECIDA
1.
CLICK MODIFY
1.
2.
SET NINYO YUNG NASA PICTURE.
CLICK “PROPERTIES”
1. CLICK “CUTOM PAPER SIZE”
2. CLICK “ADD”
NOEL JR. B. VECIDA
1.
CLICK “NEXT”
1.
2.
3.
4.
5.
SET IN (INCHES)
SET THE PAPER WIDTH (inches)
SET THE PAPER HIEGHT (inches)
CHANGE THE (INCHES) TO (MILIMETER) [para ma-convert yung English to metric]
CLICK THE “NEXT”
NOEL JR. B. VECIDA
(GANTO YUNG MANGYAYARI AFTER)
1.
2.
SET THE MARGIN (pwede rin zero lahat)
CLICK “NEXT”
NOEL JR. B. VECIDA
1.
2.
ASSIGN YOUR PREFER NAME
CLICK “NEXT”
1.
2.
3.
Example (JN)
CLICK “NEXT”
CLICK “FINISH” THEN “CLOSE” THE DIALOG BOX
NOEL JR. B. VECIDA
1.
2.
3.
CHOOSE THE PAPER YOU CREATED
CLICK “OK”
CLICK “CLOSE” TO SET UP MANAGER DIALOG BOX
1.
GANTO NA YUNG KAKALABASAN YUNG PAPER SIZE AY MAS LUMAKI NA KESA DATI, AT YUNG PRINTABLE
AREA AY ADJUSTED NA BASE SA MARGIN.
BACK TO (MODEL SPACE) GAWA KA NG PAPER SIZE MO NA NAKA (mm) example: (762 x 508mm)
OFFSET MO BASE SA MARGIN (CHECK THE PICTURE BELOW)
2.
3.
NOEL JR. B. VECIDA
1.
2.
3.
SELECT NA YUNG BORDER LINE TAS (Ctrl + X) – (pag zero ang margin isama pati yung paper size)
BACK TO PAPER SPACE/LAYOUT
(Ctrl +V) TO ORIGIN (0,0):
1.
2.
WHEN DYNAMIC INPUT IS (ON): ZERO(0) (Tab) ZERO(0) (Spacebar)
WHEN DYNAMIC INPUT IS (OFF): 0,0
ZERO(0)(comma)ZERO(0) (Spacebar)
(pareha lang kahit zero ang margin)
NOEL JR. B. VECIDA
1.
2.
3.
ITO NA YUNG MAGIGING PAPER MO
COMMAND: (OPTION) OR “OP”
GO TO (USER PREFERENCES)
1.
2.
CLICK (USER PREFERENCES)
CLICK (DEFAULT SACALE LIST)
NOEL JR. B. VECIDA
1.
2.
DELETE ALL THE SCALE LIST EXECPT 1:1
ADD A NEW LIST BAHALA KA KUNG ANONG MGA SCALE GAGAWIN MO.
1.
KUNG ANG DRAWING MO SA MODEL AY NAKA METER (as in yung line mo yung nakameter), PAPER UNITS
(1000/scale). YUNG DRAWING UNITS AS IS LANG NA (1).
NOEL JR. B. VECIDA
1.
KUNG ANG DRAWING MO SA MODEL AY NAKA MILIMETER (as in yung line mo yung nakaMILIMETER),
PAPER UNITS (AS IS) LANG NA (1), YUNG DRAWING UNITS ANG MAGBABAGO (SCALE).
=MAS MABUTI KUNG GAGAWA KA NG SCALE PARA SA mm AT SA meter
>>>AFTER MO MAG ADD NG SCALE LIST<<<
1.
2.
CLICK “OK” TO ALL DIALOG BOX.
DOUBLE CLICK THE INNER PART OF THE (VIEWPORT)
NOEL JR. B. VECIDA
1.
2.
3.
DOUBLE CLICK THE INNER PART OF THE VIEWPORT
CLICK THE SCALE LIST THEN
CLICK THE CUSTOM
1.
CLICK “CUSTOM”
1.
CLICK “RESET”
NOEL JR. B. VECIDA
1.
2.
CLICK “METRIC SCALE”
CLICK “OK” TO DIALOG BOX
1. COMMAND: Z <space> O <space> THEN SELECT THE OBJECT TO BE SCALE
2. CLICK SCALE LIST
3. CHOOSE YOUR SCALE (example 1:30)
NOTE: ANG EXAMPLE DRAWING PO AY NAKA METER.
NOEL JR. B. VECIDA
TIPS:
1. I-LAYER NIYO YUNG VIEWPORT NA NAKA DISABLE YUNG PRINTER OR SA DEFPIONTS.
2. PAG NAG DIMENSION KAYO ALWAYS KAYO MAG (Shift + Right Click) PARA KAHIT PALITAN
NINYO YUNG SCALE MATIC NA MA ADJUST YUNG DIMENSION.
SO IT’S DONE: JUST EXPLORE
“PLEASE MAG FEEDBACK KAYO SA AKIN KUNG NAKATULONG SA INYO O KUNG HINDI.”
“WAG DEADMA!”
“PM NALANG PO SA TANONG AT SUGGESTION”
MERON PANG OTHER WAY: KEEP SCROLLING. 
2 - (Z – XP/ XN) SCALING
3 - SCALING FOR MODEL DRAWINGS (improper)