AGILE MODULATOR & SATELLITE RECEIVER MULTIPLUS SM‐100 1 Contents Safety Cautions & warning ······················································································· 3 Intro ·································································································································· 4 1. Introduce description ······················································································ 4 2. Special feature of SM-100 ··········································································· 4 Hardware ························································································································ 5 1. Front Panel ········································································································ 5 2. Back Panel ········································································································ 5 3. Remote control unit ························································································ 6 System set up ·············································································································· 7 1. connecting system ·························································································· 7 Satellite broadcasting receiver ················································································· 8 1. The receiver setting ························································································· 8 1-1 The antenna setting ··············································································· 8 1-2 The TP setting ························································································· 9 1-3 Automatic searching ·············································································· 9 2. The system setting ······················································································· 10 2-1 The password setting ·········································································· 10 2-2 Upgrade the receiver ··········································································· 10 2-3 Initialization ····························································································· 10 2-4 System information ·············································································· 11 3. environment setting ······················································································· 11 3-1 Language ································································································ 11 3-2 TV mode ································································································· 11 4. Editing Channel ······························································································ 12 4-1 Channel deleting ··················································································· 12 4-2 Channel moving ···················································································· 12 4-3 Changing channel's name ································································· 13 4-4 Line up the channel ············································································ 13 Modulator ····················································································································· 15 In front of part's details ···························································································· 5 Standard of SM-100 ·························································································· 14 Symptoms of breakdown and solution ···························································· 16 Safety Cautions & warning Safety Cautions & warning ★ Please read this manual first for your safety, and then install and operate. ▷ Use certified power code (AC100V ~ AC240V 50/60Hz) ▷ Do not pull a code cable to put off and do not touch a power plug with wet Power hand. ▷ Do not strongly bend a power code and put stuff on. ☞ It is danger in fire or electronic shock. ▷ Do not install the place where is close to direct of light and heater. ▷ Do not put a heavy appliance on. installation ▷ Do not install wet place or have good ventilation. ☞ It is danger in breakdown, transformation, fire and electric shock. ▷ Do not install where is oscillation or shock ☞ It is danger in breakdown and getting hurt. ▷ when you clean, put off the power code and rup with soft towel. (Do not use chemicals.) ☞ cleaning It is danger in fire or electronic shock. ▷ Do not make a metal go into A/V terminal and vents. ☞ It is danger in fire or electronic shock. ▷ Please put power code off when it is thunder, lighting and not using long time. ☞ It is danger in fire or electronic shock. ▷ Do not detach, fix and reorganize the original product. ☞ etc. Please call to customer service center or headend company if you need repair. ▷ Please contact customer service center if it has sound, smell and smoke. 3 introduced of product and features introduction This is produced product , method of installation and proper way of operation by SM-100 standard. Special feature SM-100 Special feature is following them. ▷ Analog modulator with Satellite broadcasting receiver ▷ putting stable power part in integrated equipment. ▷ It is easy to use that is same menu with satellite receiver, SKC-7000. ▷ it is street ahead of SKC-M12 good performance modulator ▷ Remote control On/Off and Modulator channel locking function ▷ Using High efficiency SAW FILTER in IF, it can be minimize channel interference and suit that transfer the close by a channel ▷ channel changeable and all band available. ▷ simple menu and easy using for user ▷ For speedy searching, Blind Scan 4 The name of parts title of eve Front panel (1) (2) (3) (4) (5) (6) (7) (8) Rack fixed screw hole Video input volume regulation Audio input volume regulation Aural Carrier volume regulation RF output signal volume regulation LOCK: If satellite signal is normal, it become a green light. REMOCON: if remote control is activation, it become a red light. Display window of modulator : set up a output band and output channel display window. (9) Satellite remote control operation on/off button (10) channel down button (11) channel up button (12) The VHF/UHF/CATV band setting up button (13) modulator output fixed channel button (Channel Lock) rear panel (1) Power cable (2) satellite IF signal Loop Out port (3) Satellite IF signal input (4) RS-232C satellite firmware renewal (5) Modulator RF output (6) Modulator RF monitor output(-30dB) 5 Remocon mute Power using for stopping a voice, It controls receiver's on/off. and using as keyboard. recall it shows previous channel list which customer watched. You can choose this. FIND TV/SAT searching a channel promptly it isn't under using number (0~9): changing channerl, inputting password FTA/CAS it shows a channel list which standard pay free broadcasting. AUDIO user chang the sound output to AUTO, mono and stereo. (▲ ▼) channel (◀ ▶) volume channel changing regulation, SAT Satellite service channel list and volume menu Using a main menu function. FAV it can display by user favor channel standard. page ( back It make channel goes back former. ☞ Do not confused with EXIT. to m.pic multi(4,9,12,16) video output. only received selection location. ) it's only moved page by page. Radio Reception broadcastng convert into satellite TV reception and satellite radio reception zoom a partial magnification function x4, x9, x16 times INFO not offering all channels. timer you can reserve the time of sleeping. A-LANG many languages output fuction, it does not offer to all. TEXT it offer teletext broadcasting only SUBT subtitle fuction: only support in special broadcasting caution. 1 6 Remote control can use properly within 7~10m System connection caution. 2 In the rear of remote control, open the cover and put two betteries(AAA-1.5V)in it. ※ put the empty battery in separate garage, SYSTEM connection You have to organize like following picture. and check again and turn the receiver on. OUTPUT PORT TV MORNITOR PORT 7 SATELLITE RECEPTION PART Using satellite receiver - (Main menu) (Main Menu) Main Menu reception, include system, setting up environment, editing channel and utility. if you want to select, use [▲, ▼] button press [OK] 1. using reception setting -You can search chosen satellite channels. - Setting up TP and setting up are avaliable. 1-1. satellite setting - You can set the name of satellite what you want. - If you delete the satellite, press the red button. - Press the green button if you add satellite. - You can find satellite channel - You can set up the network search, LNB, 22KHz and DiSEqC if you press the [VOL] button. 8 satellite receiver 1-2. tv setting - You can setting up TP using green key. - It can change the Frequency ,SIMBOL, partiality, FEC and fine the channel. - If you delete a one of TP , you have to press red button. Press green button if you add a new TP. If you replace TP, press yellow button. - You can edit channel that is in TP if you change and add PID of channel 1-3. Searching several satellite at the same time. - It's possible to fine channel which is included in a satellite or in several satellites. - If you press the ok button, become v in the left side. If you press the blue button, you can search all of satellites. 9 satellite receiver 2. System setting 2-1 password setting -when you can make a new password in the 암호 설정(password setting), press the <OK> button and put a password. - basic password number is “0000”. if you forget a password, call to customer center. 2-2 Receiver upgrading - It transmit Program and data to receiver each other. - If you plug reception on, it is automatically transmit. it display process in reception of screen and Front Display. Please wait till coming out a finishing message. if you are on the receiver, automatically transmit. it displays in receiver and Please wait until finishing message comes out. 2-3 Initialization -If you press the <OK> button in the initialization, go to basic station. 10 satellite receiver 2-4 system information - System information include hardware ver., software ver., information, roader ver., channel data ver.,and provider cord ver. - If you have some problems, call to customer center with information about system information. - You can have a modified software in website and customer service center. 3. Environment setting User can use language, display format, sotting of display, TV mode, RF channel, RF mode, display time, transparency, rotation time of antenna and fade in/out function. 3-1 Language Using <OK> button, you can change another languages. (Korean, English, Russian) Basic setting language is korean 3-2 TV mode video output mode is NTSC CAUTION It is only for NTSC, don't change to PAL or Auto. 11 satellite receiver 4. Channel editing In this menu, user can edit channel list. User can be ordering in line. Six channels are displayed in the monitor at the same time. User can do channel editing, channel moving, changing name of channel and channel ordering in the line. Press the [TV/RADIO] button and you can change the TV, RADIO channel list. [EXIT], [BACK] button is exited from channel editing menu. 4-1 Channel deleting - Press the [red] button and you can delete a channel in channel editing menu. - Using [CH ▲, ▼]button and pressing [OK] button for selection. - After selecting channel, you can press the channel and than press [red]button and [OK]button to delete channel. 4-2 Channel moving - In the channel editing if you press the green button, you can change a location of channel. - Press the green button and than [OK] button after selecting a channel - Using [CH ▲, ▼]button and pressing 12 satellite receiver [OK] button for selection. After selecting channel, press [red]button and [OK]button to delete channel. 4-3 Changing channel's name - You can change the name of channel if you press yellow button in channel editing menu. - You can change a name of channel using [CH ▲, ▼] & [VOL ◀, ▶] - Press red button, after input a channel name. It will be changed. 4-4 In the line of channel - In the editing menu, you can make in the line of channel if you press the channel. - you can select the way of standing in a line among the 'all satellite', 'text A to Z' and 'satellite Z to A' after press the blue button. 13 satellite receiver SM-100 satellite receiver product standard 1. receiver system Processor MPEG video decoder video resolution video output level video output length and breadth rate MPEG Audio Audio sampling frequency Audio output level FLASH capacity DRAM capacity NEC CPU MPEG-2 MP@ML standard compliant 720×480(NTSC), 720×576(PAL system) 1Vp-p / 75[Ohm] 4:3 , 16:9 MPEG-Ⅱ / MusiCam Layer Ⅰ & Ⅱ 32 / 44.1 / 48 KHz 2V RMS / 10K 2 Mbyte 16 Mbyte 2. TUNER , LNB contol port / impedance F-Type , IEC 169-24 , female / 75 [ohm] Tuner input frequency 950MHz ~ 2150MHz Tuner input level -65 to -25 [dBm] modulation-demodulate process Symbol Rate LNB power LNB ton switch LNB control QPSK 1-45 Ms/s 13 / 18V (Max 400mA) 22KHz 4KHz (0.65Vp-p / ±0.25V) DiSEqC 1.0 / 1.2 3. front and rear external power a pilot lamp front side action button PC communication port TV standard 4. power and feature Power cons power action temperature keeping temperature allowable relative humidity weight size 14 terminal Segment Display, Power & IR Control LED etc Remocon, Menu, OK, Ch-Up/Down, Vol-Up/Down etc Transfer rate 115,200 bps 9 pin D-sub Type NTSC-M Selectable 85 - 240V AC, 60Hz The maximum 30W 0℃ to + 45℃ -10℃ to + 70℃ 10% ~ 95% approximately 850g (without accessory) 482 x 240 x 44 (mm) Modulator The feature of modulator • in IF using good performance SAW FILTER can make channel interference minimize • it can be a adjacency channel transmission use • Through the front side condition display check the equipment condition. • Output channel number select and available transmission changeableness amplitude modulator • power On/Off - remembering latest channel • Channel fixed function (Lock) The feature of electronic in modulator item Unit Performance Remark column MHz 54 ∼ 870 6MHz with in band dB㎶ 110 MAX impedance Ω -15 ±10 1.8 and below 75 unbalance more than 50 25 Hz ∼ 4.2 MHz ±1 3 3 more than 60 1 50Hz ∼ 15KHz ±0.5 600 ±5% video signal standard frequency respond dB KHz dB Ω dB dB % 。 dB V dB output frequency range video signal output level sound output level feature frequency stable standing wave impidence sp frequency band frequency feature video differential gain signal differential topological feature signal-to-noise ratio input level RF frequency band sound signal signal-to-noise ratio feature input level high frequency dB dBm 25Hz ∼ 4.2MHz 50Hz ∼ 15KHz balance,unbalance more than 60 0±5 ±0.5 % distortion power the consumption AC 85V ∼ 240 V 60Hz (Free Volt) The size 482mm ( W ) x 240mm ( D ) x 44mm ( H ) 15 Symtoms of breakdown and solutions symptoms of breakdown and solutions Screen doesn't work. Sound doesn't work. Remote control doesn't work. check point solution - Check the power socket. - check the port of satellite antenna. is it connecting? - check the connecting port. - check the power on in rear side. - check the video level in front side - Please put a plug into the outlet socket properly. - Please install it again. - turn the power off and on - Please check the RF output port. -Please check the sound from the headend - Please check the sound level in the rear. - Please put a plug into the outlet socket properly. - Please install it again. - Please turn the power on and off. - .Replace a battery. - Please check the remote control pressing On/Off button whether it is activation or not. Press on/off -.Please check the remote control whether it is profer. Please call customer center for detail. 16 - Please change new batteries. - Using the remote control properly.
