SAMMYS FOR WOOD
®
SAMMYS® FOR WOOD - Vertical Application
Application
Product Features
Not less than
2” nominal width
(1-1/2”)
Wood Flooring
• No pre-drilling required.
• Quick to install using the Sammy
Nut Driver with an 18V cordless
drill/driver.
Not less than
3” nominal
thickness (2-1/2”)
(depth or side
of vertical member)
Wood Joist
• Saves time from traditional
methods.
Double Sheetrock
Ceiling
For vertical use install in center of lower face.
• Reduces installation costs.
• Made in the U.S.A.
Minimum 2” embedment into base
material for NFPA 13 compliance.
Composite / Truss
Consult truss manufacturer for
recommended installation point.
*Pre-drilling may be required for GST
25-380 . Tool available on page 11.
Watch a video demonstration at
www.itwbuildex.com
Approvals
Rod
Size
Part
Number
Model
Screw
Descriptions
1/4"
8002957
GST 100
1/4 x 1"
1/4"
1/4"
8003957
8004957
GST 200
GST 300
3/8"
8007957
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
8008957
8068925
8009925
8010957
8069925
8011925
8013925
8014925
8015925
Ultimate
Pullout (lbs)
UL Test
Load (lbs)
FM Test
Load (lbs)
Box
Qty
Case
Qty
210 (7/16” OSB)
670 (3/4” Ply)
25
125
1/4 x 2"
1/4 x 3"
1760 (Fir)
2060 (Fir)
25
25
125
125
GST 10
1/4 x 1"
210 (7/16” OSB)
670 (3/4” Ply)
25
125
GST 20
GST 20-SS
GST 25-380
GST 30
GST 30-SS
GST 40
GST 2
GST 2.5-380
GST 3
1/4 x 2"
1/4 x 2"
3/8 x 2-1/2"
1/4 x 3"
1/4 x 3"
1/4 x 4"
1/4 x 2"
3/8 x 2-1/2"
1/4 x 3"
1760
1760
2113
2060
2060
2180
1760
2113
2275
25
25
25
25
25
25
25
25
25
125
125
125
125
125
125
125
125
125
VERTICAL MOUNT
#14 Black
Nut Driver
Part # 8113910
(Fir)
(Fir)
(Fir)
(Fir)
(Fir)
(Fir)
(Fir)
(Fir)
(Fir)
300
850
850
1500
1500
1475
1475
#14 SW Red
Nut Driver
Part # 8114910
SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation each time. When the face of the driver comes into
contact with the material you are installing into, continue drilling until nut driver spins free. Installation is then complete. Warranty requires the use of the appropriate nut driver for installations.
For the most up to date information, visit www.itwbuildex.com
4
SAMMYS FOR STEEL
®
SAMMYS® FOR STEEL - Vertical Application
Application
Product Features
• Made with Teks® self-drilling fasteners no pre-drilling required.
• Installs into steel range from
20 gauge – 1/2” thicknesses.
• Saves time from traditional methods.
• Reduces installation costs.
• Quick to install using the Sammys Nut
Driver with an 18V cordless drill/driver.
no rilling
r
p e-d equired
r
• A standard screwgun with a depth sensitive
nosepiece should be used to install Teks.
For optimal fastener performance, the
screwgun should be a minimum of 6 amps
and have an RPM range of 0-2500.
• Made in the U.S.A.
Watch a video demonstration at
www.itwbuildex.com
Approvals
#14 Black
Nut Driver
Part # 8113910
#14 SW Red
Nut Driver
Part # 8114910
Rod
Size
VERTICAL MOUNT
1/4"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
Part
Number
Model
Screw
Descriptions
Ultimate
Pullout (lbs)
UL Test
Load (lbs)
FM Test
Load (lbs)
Min
Thick
Max
Thick
Box
Qty
Case
Qty
1475
1475
1475
.036"-20 ga
.036"-20 ga
.036"-20 ga
.036”-20 ga
.188”-3/16”
.036"-20 ga
.060”-16 ga.
.036"-20 ga
3/16"
3/16"
3/16"
3/16”
1/2"
3/16"
1/2"
3/16"
25
25
25
25
25
25
25
25
125
125
125
125
125
125
125
125
8024957
8025957
8026957
8027957
8030957
8038957
8037957
8039957
DSTR 100 *
DST 100
DST 150
DST 200
TEK 500
DSTR 1 *
DSTR 1-1/2 *
DSTR 516 *
1/4-20 x 1" TEKS 3
1/4-14 x 1" TEKS 3
1/4-14 x 1-1/2" TEKS 3
1/4-14 x 2" TEKS 3
12-24 x 1-1/2" TEKS 5
1/4-20 x 1" TEKS 3
12-24 x 1-1/2" TEKS 5
5/16-18 x 1-1/4" TEKS 3
1510 (20 ga.)
446 (20 ga.)
970 (16 ga.)
446 (20 ga.)
3125 (3/16")
1510 (20 ga.)
1510 (3/16")
2200 (20 ga.)
3/8"
8040957
DST 10
1/4-14 x 1" TEKS 3
446 (20 ga.)
970 (16 ga.)
.036"-20 ga
3/16"
25
125
3/8"
8077925
DST 10-SS
1/4-14 x 1" TEKS 3
446 (20 ga.)
970 (16 ga.)
.036"-20 ga
3/16"
25
125
3/8"
8041957
DST 15
1/4-14 x 1-1/2" TEKS 3
446 (20 ga.)
970 (16 ga.)
.036"-20 ga
3/16"
25
125
3/8"
8078925
DST 15-SS
1/4-14 x 1-1/2" TEKS 3
446 (20 ga.)
970 (16 ga.)
.036"-20 ga
3/16"
25
125
3/8"
8042957
DST 20
1/4-14 x 2” TEKS 3
446 (20 ga.)
970 (16 ga.)
.036"-20 ga
3/16"
25
125
3/8"
8043957
DST 25
1/4-14 x 2-1/2" TEKS 3
446 (20 ga.)
970 (16 ga.)
.036"-20 ga
3/16"
25
125
3/8"
8044957
DST 30
1/4-14 x 3" TEKS 3
446 (20 ga.)
970 (16 ga.)
.036"-20 ga
3/16"
25
125
3/8"
3/8"
8045957
8046957
DST 516
TEK 50
5/16-18 x 1-1/4" TEKS 3
12-24 x 1-1/2" TEKS 5
1500 (3/16")
3125 (3/16")
.125"-1/8"
.250”-1/4”
3/16"
1/2"
25
25
125
125
1/2"
8031925
DST 2.0
1/4-14 x 2" TEKS 3
446 (20 ga.)
970 (16 ga.)
.188"-3/16"
1/4"
25
125
1/2"
1/2"
1/2"
1/2"
8033925
8034925
8035925
8036925
DSTR 1.0 *
DSTR 5.16 *
DST 5.16
TEK 5.0
1/4-20 x 1" TEKS 3
5/16-18 x 1-1/4" TEKS 3
5/16-18 x 1-1/4" TEKS 3
12-24 x 1-1/2" TEKS 5
1510
2220
1500
3125
.036"-20 ga
.036"-20 ga
.125"-1/8"
.188"-3/16"
3/16"
3/16"
3/16”
1/2"
25
25
25
25
125
125
125
125
(20 ga.)
(20 ga.)
(3/16")
(3/16")
1500
1500
1500
1500
1500
1475
1475
*Includes retaining nut
SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation
each time. When the face of the driver comes into contact with the material you are installing into, continue drilling until nut driver spins
free. Installation is then complete. Warranty requires the use of the appropriate nut driver for installations.
For the most up to date information, visit www.itwbuildex.com
6
WOOD
SIDEWINDER® FOR STEEL - Horizontal Application
Application
o
n
ling
pre-dreilquired
r
www.itwbuildex.com
• Made in the U.S.A.
Approvals
#14 SW Red
Nut Driver
Part # 8114910
Rod
Size
Part
Number
HORIZONTAL MOUNT
1/4" 8047957
1/4" 8049957
3/8" 8050957
3/8" 8080925
3/8" 8051957
3/8" 8052957
3/8" 8053957
3/8" 8055957
3/8" 8054957
3/8" 8056957
3/8" 8057957
Model
SWD 100
SWDR 100 *
SWD 10
SWD 10-SS
SWD 15
SWD 20
SWD 516
SWDR 1 *
SWDR 1-1/2 *
SWDR 516 *
SWT 15
Screw
Descriptions
Ultimate
Pullout (lbs)
1/4-14 x 1" TEKS 3
1/4-20 x 1" TEKS 3
1/4-14 x 1" TEKS 3
1/4-14 x 1" TEKS 3
1/4-14 x 1-1/2" TEKS 3
1/4-14 x 2" TEKS 3
5/16-18 x 1-1/4" TEKS 3
1/4-20 x 1" TEKS 3
12-24 x 1-1/2" TEKS 5
5/16-18 x 1-1/4" TEKS 3
12-24 x 1-1/2" TEKS 5
1477 (16 ga.)
1900 (20 ga.)
1477 (16 ga.)
1477 (16 ga.)
1477 (16 ga.)
1477 (16 ga.)
2480 (20 ga.)
1900 (20 ga.)
2375 (3/16")
2480 (20 ga.)
2375 (3/16")
UL Test
Load (lbs)
FM Test
Load (lbs)
1500
1500
1500
1475
1475
1475
Min
Thickness
Max
Thickness
Box
Qty
Case
Qty
.060"-16 ga
.036"-20 ga
.060"-16 ga
.060"-16 ga
.060"-16 ga
.060"-16 ga
.036”-20 ga
.036"-20 ga
.188"-3/16"
.036"-20 ga
.188"-3/16"
3/16"
3/16"
3/16"
3/16"
3/16”
3/16”
3/16”
3/16"
1/2"
3/16"
1/2"
25
25
25
25
25
25
25
25
25
25
25
125
125
125
125
125
125
125
125
125
125
125
STEEL
• Made with Teks® self-drilling fasteners - no pre-drilling required.
• Installs into steel range from 20 gauge – 1/2” thicknesses.
• A standard screwgun with a depth sensitive nosepiece should be used to
install Teks. For optimal fastener performance, the screwgun should be a
minimum of 6 amps and have an RPM range of 0-2500.
• Saves time from traditional methods.
• Reduces installation costs.
• Quick to install using the Sammys Nut Driver with an
18V cordless drill/driver.
Watch a video demonstration at
STEEL
Product Features
*Includes retaining nut
Application
CONCRETE
SAMMYS SWIVEL HEAD™ FOR STEEL - Swivel Application
Product Features
• Eliminates distortion of threaded rod in sloped roof applications.
• Accommodates 3-1/2 x 12 pitch.
• Installs into angled z-purlin; allows threaded rod to hang plumb.
Watch a video demonstration at
www.itwbuildex.com
Approvals
Rod
Size
Part
Number
Model
Screw
Descriptions
Ultimate
Pullout (lbs)
UL Test
Load (lbs)
FM Test
Min Max Box Case
Load (lbs) Thick Thick Qty Qty
SWIVEL MOUNT
#14 Black
Nut Driver
Part # 8113910
#14 SH Orange
Nut Driver
Part # 8273910
8137957 SH-DSTR 1*
1/4-20 X 1”
TEKS 3
3/8"
8268957 SH-TEK 50
12-24 x 1-3/4"
TEKS 5
2368 (1/2" steel Vertical)
1306 (45° off Vertical)
1500 (Vertical)
2281 (3/16” HSS)
850 (45° off Vertical)
1585 (3/16” HSS 45° off Vertical)
1/2”
8270957 SH-TEK 5.0
12-24 x 1-3/4”
TEKS 5
2368 (1/2” steel Vertical)
1306 (45° off Vertical)
2281 (3/16” HSS)
1585 (3/16” HSS 45° off Vertical)
3/8"
3220 (3/16”)
1500
1475
.035”
3/16”
25
125
4"
2-1/2”
3/16"
1/2"
25
125
3/16"
1/2"
25
125
*Does not comply with ROHS requirements / Includes retaining nut
7
To find a distributor near you, call 800-BUILDEX
APPROVALS
• Made in the U.S.A.
ACCESSORIES
• Allows 17° deflection from vertical.
SAMMY X-PRESS
®
Installs into Metal Deck, Purlin, or Tubular Steel
SAMMY X-PRESS® - Vertical Application
Application
Product Features
• The Sammy X-Press expands to provide
direct vertical attachment in:
- light gauge steel deck or purlin
(22 ga. - 1/8”).
(XP)
• Less jobsite material needed.
• No retaining nut required.
• Provides design flexibility.
• Installs in seconds with Sammy X-Press It® Tool,
saving time & installation costs.
• Made in the U.S.A.
• Use in applications where access to the back of
the installed fastener is prohibited. ie. metal roof
deck, tubular steel, or vapor barrier fabric.
Approvals
Rod
Size
Part
Number
Model
Description
Ultimate
Pullout (lbs)
UL Test
Load (lbs)
UL Min
Thick
1/4"
8181922
XP 200
Sammy
X-Press 200
1146 (22 ga)
185 (Luminaire)
250 (Luminaire)
.027"
.056”
3/8"
8150922
XP 20
Sammy
X-Press 20
1146 (22 ga)
850 (2½" Pipe)
185 (Luminaire)
250 (Luminaire)
283 (Conduit & Cable)
.027"
.027”
.056”
.029”
3/8"
8153922
XP 35
Sammy
X-Press 35
1783 (16 ga)
1500 (4" Pipe)
185 (Luminaire)
250 (Luminaire)
416 (Conduit & Cable)
.060”
.029”
.056”
.059”
3/8"
8150922
XP 20
Sammy
X-Press 20
1146 (22 ga)
850 (2½ Pipe)
FM Test
Load (lbs)
FM Min
Thick
Watch a video demonstration at
www.itwbuildex.com
Max
Thick
Box
Qty
Case
Qty
Application
.125”
25
125
Metal Deck
.125”
25
125
Metal Deck
.125”
25
125
Purlin
25
125
Metal Deck
(Pre-Pour)
Metal Deck
(Post-Pour)
VERTICAL MOUNT
940 (2" Pipe)
1475 (4” Pipe)
.029”
.104”
940 (2" Pipe)
1475 (4” Pipe)
.029”
.104”
Pre-Pour Structural Concrete@ 3000 psi
Post-Pour Range II LWC≤ 35 PCF (lbs/ft³)
Pre-Pour Structural Concrete @ 3000 psi
Post-Pour Range II LWC≤ 35 PCF (lbs/ ft³)
SIDEWINDER X-PRESS™ - Horizontal Application
Application
Product Features
• The Sidewinder X-Press expands to provide
horizontal attachment in:
- 16 ga - 3/16” steel - purlin, tubular steel.
• Less jobsite material needed.
• Installs in seconds with Sammy X-Press It® Tool,
saving time & installation costs.
• Provides design flexibility.
• No retaining nut required.
• Made in the U.S.A.
• Use in applications where access to the back of
the installed fastener is prohibited; ie. metal roof
deck, tubular steel, or vapor barrier fabric.
(SWXP)
Watch a video demonstration at
www.itwbuildex.com
Approvals
Rod
Size
Part
Number
Model
Description
8293957
SWXP 35
Sidewinder
X-Press 35
Ultimate
Pullout (lbs)
UL Test
Load (lbs)
UL Min
Thick
FM Test
Load (lbs)
Max
Thick
Box
Qty
Case
Qty
Application
.125”
25
125
Purlin
HORIZONTAL MOUNT
3/8"
For the most up to date information, visit www.itwbuildex.com
1250 (3½" Pipe)
80 (Luminaire)
416 (Conduit & Cable)
1798 (16 ga)
8
.059”
WOOD
SWIVEL X-PRESS™ - Swivel Application
Application
Product Features
• The Swivel X-Press allows you
to hang plumb in extreme roof pitches:
- 89° in z-purlin
- 45° in metal deck for 12/12 pitch
• Provides design flexibility.
• Installs in seconds with Sammy X-Press It® Tool,
saving time & installation costs.
extreme
(SXP)
or
nt
varpia
itches
Rod
Size
Part
Number
• Made in the U.S.A.
• Use in applications where access to the back of
the installed fastener is prohibited. ie. metal roof
deck, tubular steel, or vapor barrier fabric.
roof
Approvals
• No retaining nut required.
Ultimate
Pullout (lbs)
Watch a video demonstration at
www.itwbuildex.com
UL Test
Load (lbs)
UL Min
Thick
FM Test
Load (lbs)
FM Min
Thick
Max
Thick
Box
Qty
Case
Qty
Application
750 (2” Pipe)
170 Vertical (Luminaire)
80 @ 45° (Luminaire)
283 Vertical (Conduit & Cable)
233 @ 45° (Conduit & Cable)
.029”
635 (2” Pipe)
.029”
.125”
25
125
Metal Deck
1250 (3-1/2" Pipe)
250 Vertical (Luminaire)
1675 (16 ga Vert)
80 @ 90° (Luminaire)
1558 (89° Off Vert)
500 Vertical (Conduit & Cable)
333 @ 89° (Conduit & Cable)
.059”
635 (2" Pipe)
.029”
.125”
25
125
Purlin
Model
Description
SXP 20
Swivel
X-Press 20
1061 (22 ga Vert)
829 (45° Off Vert)
STEEL
for
• Less jobsite material needed.
8294922
3/8"
8295922
SXP 35
Swivel
X-Press 35
1/2”
8272957
SXP 2.0
Swivel
X-Press 2.0
1061 (22 ga Vert)
829 (45° Off Vert)
.027”
.125”
25
125
Metal Deck
1/2"
8271957
SXP 3.5
Swivel
X-Press 3.5
1675 (16 ga Vert)
1558 (89° Off Vert)
.060"
.125”
25
125
Purlin
SAMMY X-PRESS IT® Installation Tool
Application
CONCRETE
3/8”
STEEL
SWIVEL MOUNT
• The Sammy X-Press expands to provide
direct vertical attachment in:
- metal deck (22-16 gauge)
- z-purlin (18-16 gauge)
• Made in the U.S.A.
Watch a video demonstration at
www.itwbuildex.com
Model
Description
Qty
8194910
8152910
UXPIT*
XPDB
Universal X-Press It Tool
25/64" Drill Bit
1
1
APPROVALS
Part Number
*Tool Includes: Sleeve, Bit Receiver, Hex Wrench, and 25/64” Drill Bit.
9
ACCESSORIES
Product Features
To find a distributor near you, call 800-BUILDEX
SAMMYS FOR CONCRETE
®
SAMMYS® FOR CONCRETE - Vertical Application
Application
Product Features
• Easy two step process (Drill hole &
drive Sammys concrete anchor).
• ¼” pre-drilled pilot hole required.
• Concrete Installation Tool available for
a one tool installation process.
• Made in the U.S.A.
Watch a video demonstration at
www.itwbuildex.com
Rod
Size
Part
Number
VERTICAL MOUNT
1/4"
3/8"
3/8"
1/2"
8058957
8059957
8145925
8060925
Approvals
#14 Black
Nut Driver
Part # 8113910
#14SW Red
Nut Driver
Part # 8114910
Model
CST 200
CST 20
CST 20-SS
CST 2
Screw
Descriptions
5/16 x 1-3/4"
5/16 x 1-3/4"
5/16 x 1-3/4"
5/16 x 1-3/4"
Ultimate
Pullout (lbs)*
2400
2400
2400
2400
FM Test
Load (lbs)
1475
Box
Qty
Case
Qty
25
25
25
25
125
125
125
125
* Tested in 3000 PSI concrete
SIDEWINDER® FOR CONCRETE - Horizontal Application
Application
Product Features
• Easy two step process (Drill hole & drive Sammys
concrete anchor).
• ¼” pre-drilled pilot hole required.
• Concrete Installation Tool available for a one tool
installation process.
• Made in the U.S.A.
Watch a video demonstration at
www.itwbuildex.com
Rod
Size
Part
Number
Model
HORIZONTAL MOUNT
1/4"
3/8"
8062957
8061957
SWC 200
SWC 20
Approvals
Screw
Descriptions
5/16 x 1-3/4"
5/16 x 1-3/4"
Ultimate
Pullout (lbs)*
2450
2450
FM Test
Load (lbs)
Box
Qty
Case
Qty
1475
25
25
125
125
* Tested in 3000 PSI concrete
#14SW Red
Nut Driver
Part # 8114910
SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation
each time. When the face of the driver comes into contact with the material you are installing into, continue drilling until nut driver spins
free. Installation is then complete. Warranty requires the use of the appropriate nut driver for installations.
For the most up to date information, visit www.itwbuildex.com
10