Command from RNC or NOC java commands LOAD Starting Commands lt utrancell|nbap|aal|etm lt all :/opt/ericsson/cominf/Netscape_JRE_131_09 : ehassha@ri3guas1> cd ./moshell ehassha@ri3guas1>./moshell 3rj01 ( 3rj01- RNC) : Load Managed Object : Load all Mo( managed object ) cab : (cabinet ) cabx : (including boards) RNC_ITANAGAR> cabx 110702-11:36:46 10.228.225.9 8.0a RNC_NODE_MODEL_J_3_45 stopfile=/tmp/16959 put /home/els/moshell_logfiles/logs_moshell/tempfiles/20110702-111850_16928/lhCmd16959 /d/usr/lhCmd16959 ... OK ........................ ================================================================================= ==================== SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR TEMP COREMGR ================================================================================= ==================== 0 1 SCB3 ON OFF OFF ROJ 119 2108/4 R2D 20080912 TU8G433012 +28C 0 2 SXB3 ON OFF OFF ROJ 119 2109/3 R1D 20080823 TU8G394805 +26C 0 3 SXB3 ON OFF OFF ROJ 119 2109/3 R1D 20080823 TU8G394808 +25C 0 4 TUB2 ON OFF OFF ROJ 119 2104/4 R3C 20080920 TU8G453353 0 5 TUB2 ON OFF OFF ROJ 119 2104/4 R3C 20080920 TU8G453278 0 6 ET-MF4 ON OFF OFF ROJ 119 2291/1 R1A 20080908 TU8G426258 0 7 ET-MF4 ON OFF OFF ROJ 119 2291/1 R1A 20080223 TU8G148898 0 8 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445143 +29C 0 9 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080913 TU8G435674 +30C 0 10 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445142 +29C StandbyReady* 0 11 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445123 +29C Active 0 12 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445140 +30C 0 13 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G444972 +30C 0 14 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445195 +30C 0 15 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445141 +30C Confidential 2 (8) Prepared (also subject responsible if other) John Jalilian Approved RNC COMMAND FOR MOSHELL No. Checked 2007-11-29 Date Rev Reference 071129 0 16 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445096 +31C 0 17 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445247 +30C 0 18 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G444817 +31C 0 19 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419479 +42C 0 20 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419669 +44C 0 21 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080813 TU8G379138 +44C 0 22 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080731 TU8G356830 +47C 0 23 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080907 TU8G423997 +44C 0 24 ET-MC41 ON OFF OFF ROJ 119 2161/2 R1B 20081009 TU8G511370 0 26 ET-MC41 ON OFF OFF ROJ 119 2161/2 R1B 20081009 TU8G511440 0 0 SCB3 ON OFF OFF ROJ 119 2108/4 R2D 20080912 TU8G433245 +30C ----------------------------------------------------------------------------------------------------1 1 SCB3 ON OFF OFF ROJ 119 2108/4 R2D 20080912 TU8G433018 +28C 1 2 ET-MF4 ON OFF OFF ROJ 119 2291/1 R1A 20080908 TU8G426180 1 6 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419668 +40C 1 7 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419763 +45C 1 8 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419594 +46C 1 9 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419601 +45C 1 10 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419633 +42C 1 12 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G444822 +27C 1 13 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445003 +29C 1 14 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445221 +29C 1 15 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G445149 +29C 1 16 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080917 TU8G444824 +29C 1 17 GPB53 ON OFF OFF ROJ 119 2106/53 R4D 20080913 TU8G435643 +28C 1 19 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419603 +41C 1 20 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419481 +45C 1 21 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419604 +46C 1 22 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080905 TU8G419598 +46C 1 23 SPB21 ON 16HZ OFF ROJ 119 2103/41 R2D 20080907 TU8G423945 +41C 1 0 SCB3 ON OFF OFF ROJ 119 2108/4 R2D 20080912 TU8G433020 +26C ----------------------------------------------------------------------------------------------------================================================================ SMN ProductNr Rev Name Date SerialNr ================================================================ 0 2/BFD 742 2018 R1A Subrack 01W05 Cello 2 HW 0 ROJ 605 107/3 R1A CBM 20080813 X911652429 1 2/BFD 742 2018 R1A Subrack 19700101 1 ROJ 605 107/3 R1A CBM 20080813 X911652416 ---------------------------------------------------------------================================================================================= =============================================== SMN APN PORT BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR Confidential 3 (8) Prepared (also subject responsible if other) No. John Jalilian Approved Checked RNC COMMAND FOR MOSHELL 2007-11-29 Date Rev Reference 071129 ================================================================================= =============================================== 0 0 port_0_dev_7 FAN steady off off BKV 301 487/1 R3F 20080820 X76CP03369 1 0 port_0_dev_7 FAN steady off off BKV 301 487/1 R3F 20080820 X76CP03374 -------------------------------------------------------------------------------------------------------------------------------lt plug : ( load MO's) lst plug : ( Monitor per site including board ) str : ( status of RNC Locked and unlocked cell ) strt : status RNC with ETM Bords( ES-?-?-? ima 23 ) alt : (alarm to minitor sites ) alk : acknowledge( Warning/major or minor alarms) lgd : alarm log with downtime llog : Check restarted data lgaes lgs months) lgasmi 30 them lgaevs 5h lgac 30m bl : alarm log all :display the system log for the whole period stored in system log (can be several :display the last 30 days of the alarm and system logs, merge them and show in reverse chronological order. :display the last 5 hours of the alarm/event/availability/system logs. :display the last 30 minutes of the alarm log and print the output into a csv file. : ( Locked cell ) deb : (unlocked cell) pmr : will show statistics tg UIT003 : Check Cell error code, cellbarred, actor info. RNC_ITANAGAR> tg UIT003 110702-11:37:52 10.228.225.9 8.0a RNC_NODE_MODEL_J_3_45 stopfile=/tmp/16959 Confidential 4 (8) Prepared (also subject responsible if other) No. John Jalilian Approved Checked RNC COMMAND FOR MOSHELL 2007-11-29 Date Rev Reference 071129 ------------------------------------------------------------------------------------------------------------------------------MOD MFRO ModMP UtranCellId IubLinkId CfRO IfRO CellActor IubActor CcDev ------------------------------------------------------------------------------------------------------------------------------15 7 011600 UIT0031 Iub_00003 3 1 1/1/1/1/2/1.1 1/1/1/1/6/2.1/3 15 7 011600 UIT0032 Iub_00003 4 1 1/1/1/1/2/1.2 1/1/1/1/6/2.1/3 15 7 011600 UIT0033 Iub_00003 5 1 1/1/1/1/2/1.3 1/1/1/1/6/2.1/3 ------------------------------------------------------------------------------------------------------------------------------get radiolink : User &Traffic get rbslocalcell:ueregprint sum : cell id / If the site dont comes up after intergration check the below. : To view total users ( i.e ueregprint sum $ 380 UEs registered. ) .lt iub : on both nodes .lk IubLink=Iub_GRYxxx : in RNC .lk iub=<iub>/lst iub : in RBS AAL2 Addresses :.get aal2routingcase=<rbsroutingcase: in RNC .get aal2sp=1966101000200046 : in RBS VCI values :- . get aal2path xxxx . lst bxxx . get bxxxxca : Nbap number only : without Nbap comman ID : with Nbap command ID ( Then will see the IUB Name ) localCellId :. lst cell : in RBS . get cell=gnj357 localcell : in RNC Transmission :lacc atmport=<port>,vpltp=<vp>,vpctp=1,vclXX eteloopback : VCL 32 / 33 for signalling get cell= local get utrancell=gryXXX local get sync : RNC : in RNC : synchonization Confidential 5 (8) Prepared (also subject responsible if other) No. John Jalilian Approved Checked RNC COMMAND FOR MOSHELL acc 0 restrart 2007-11-29 Date Rev Reference 071129 : restart Node B acc 010600 restart : restart AIUB sector 1 acc 010900 restart : restart AIUB sector 2 acc 011200 restart : restart AIUB sector 3 lhsh 001200 ps port * (3206) : VSWR ( Choose the TMA port ) exp: lhsh 001200/port_1_dev_12 asc vswr : for available for 3206 cabinet only lhsh 010600 ps port * (3202)choose AIUB : for available for 3202 cabinet only exp: lhsh 010600/port_0_dev_18 asc vswr : for available for 3202 cabinet lhsh 010900 ps port * : for available for 3202 cabinet exp: lhsh 010900/port_0_dev_20 asc vswr : for available for 3202 cabinet lhsh 011200 ps port * exp: lhsh 011200/port_0_dev_22 asc vswr exp: : for available for 3202 cabinet lt ret : Calibrate RET lst ret : List RET device pr retdevice : get RET proxy get ret electrical : See overall value set (proxy) electricalAntennaTilt XX : Change tilting value actl : Action list =Proxy = 1403 ( Choice either one frm 1401/1402/1403 ) actc : Action call =Proxy = 1403 ( Choice either one frm 1401/1402/1403 ) actc 1403 forceCalibration : ( Choice either one frm 1401/1402/1403 ) get 0 : RBS Type cvls : CV's Data Confidential 6 (8) Prepared (also subject responsible if other) No. John Jalilian Approved Checked RNC COMMAND FOR MOSHELL get XXX (sector proxy) 2007-11-29 Date Rev 071129 : Cell id get jumper : For jumper Attenuation get feeder : For Feeder Attenuation get feeder Attenuation : For Feeder Attenuation ( All Sector ) lget utrancell cid XXXX : To check cell id at RNC st plug dif Reference : list MO's ( Managed Object ) : Compare two Mos lget utrancell=(xxxx) utrancellref : To find neighbouring cell 3G lget utrancell=(xxxx) gsmcellref : To find neighbouring cell 2G lpr utrancell=(uit003) utranrelation : To find all relation Utrancell & GSM lt utranc : To Load Utrancell Scrambling codes lget utran primarysc : To find power and scarmbling codes. lget (Site Name) primarys : To find sector scrambling codes for site. lget utran primarysc (362) : To find same scrambling which is using to another site. get Aal2sp : To check the Aal2ea which is connected to RNC. lget Aal2sp : With operating state (NODE-B) lget (exp-Aal2sp:966101000200046) Nbap in RNC. get aal2pathvcctp=bXXXX : To check the Aal2Ap=bXXX which site is connected under this : To get path port from RNC lst bxxx(Nbap) : To check operating state with proxy. get bxxxca(Proxy) correct or not.. : To check Nbap Enable or Disable in RNC and will know whether the site is get sector lat/lon : To get sector's langlitude/longlitude. pr iub : To get RBS ID and get proxy/ NodeBFunction=1,Iub=GRYXXX Confidential 7 (8) Prepared (also subject responsible if other) No. John Jalilian Approved Checked RNC COMMAND FOR MOSHELL 2007-11-29 Date Rev 071129 pr retdevice : Ret device get <proxy> : Operating State get config : Overall Configuration In ( Node B & RNC ) CVMS : To create New CV via moshell ( NODE B ) cvrm (cv-name) : Remove CV name cvms (cvname) : Create CV name cvmk (cvName) : to create cv cvset (cvname) cvls cvcu st atmport get (proxy) lst plug 0 : To set the Set Startable : All Cv's Including Basic and Upgrade package with created date. : CV detail and Running CV : To check E1 state in Node B : To check locked board in node Acc 000900 restart : To restart / reload board In all nodes Acc 001400 reload : To restart / reload board In all nodes pmxh utrancell downtime pmr -m 5 lt vcl pget vcl get all ingressAtmPcr ingressAtmPcr get all in.*P st all dis Reference : Downtime counters will be displayed side by side : will show statistics for the last 5 hours : Lt vcl e.g pmReceivedAtmCells/pmTransmittedAtmCells of VclTp : error :-pmReceivedAtmCells/pmTransmittedAtmCells of VclTp : View only one attribute of all AtmTrafficDescriptors: Attribute: : to view filter output : View all disable Mo's Confidential 8 (8) Prepared (also subject responsible if other) No. John Jalilian Approved Checked RNC COMMAND FOR MOSHELL 2007-11-29 Date Rev 071129 CHECK E-1 RNC lst xxx : (gryxxx site name ) get proxy e.g b1102ca : ( proxy for nbapcommon/dediccated ) lst b1102 : ( print all atm layer com -note the aal2 ) Lpget (ATM boards) : ( to check performance TX/RX Error) get xxx : (proxy ATM PORT) pr etm : to print AAL path file. lcc xxx : (proxy ) Lst (copy paste subrack) st xxx LPget xxx : ATM port performance Error. : (proxy) : (proxy to get performance error E1) Reference