Manufactured in the USA Since 1946 2020 Catalog LIQUID TIGHT Fittings Connectors Accessories CORD GRIPS AMERICAN FITTINGS RIGID Put the USA Mark on All Your Work FMC EMT ® 800.221.5268 amftgs.com © 2020 Fair Lawn, New Jersey HARDWARE Better Products, Better Ideas, Better Value, Think AMERICAN NOTES MY PRODUCT NOTES American Fittings Contact: Email: Telephone: website: amftgs.com tel: 800.221.5268 Cord Grips 2020 Cord Connectors Alloy Steel, Aluminum, Stainless Made in the USA Why Aren’t Your Cables Wearing the BEST ? STOP USING OUTDATED CORD CONNECTORS AND CONNECT WITH THE BEST! AMFICO SPEC-grade Strain Relief Cord Grips are Guaranteed to: Prevent Cable Pullout Control Arc Of Bend Provide a Tight Seal Against the Toughest Elements Dirt , Grease, and Sludge Liquids Moisture Oils Coolants Create a More Secure Connection Save Time on Installation TAKE THE GUESSWORK OUT OF WHAT CONNECTOR GOES WITH WHAT SIZE CABLE! AMFICO CG Kits One Bag Does It All AMFICO ‘s JOB READY EZ Cord Grip Kits are Packaged to Fit Your Needs ONE Package Accommodates a Full Range of Flexible Cord Sizes Cord Grip Kits are Available in Steel, Aluminum, and Stainless 1 AMERICAN FITTINGS Corporation ® Cord Grip Connectors Since 1946 Size Range: 3/8” - 3” Product Series: CG Series Cord Grip Cable Glands Materials: Alloy Steel Zinc Plated with Chromate Finish Stainless Steel and Aluminum Material Option* Industrial SPEC-grade Dimensional Information and Catalog Numbers on Pages 2 & 3 Applications: SPEC-grade Cord Grip connectors are the ideal choice for environment and applications where product integrity is your prime concern. AMFICO cord connectors ARE suitable and are currently used in many industries; including; petroleum, food processing, chemical, wastewater treatment, HVAC, aerospace, electric power, automobile, paper mills, pumps. Our cord grips are the ideal choice for all your cable requirements. For use with non-armored flexible cord. CG Connectors are fully manufactured in our factory in Fair Lawn, NJ. Precision machined from solid bar stock, there is not a stronger or more versatile seal tight-fitting made. Strong NPT threads ensured you are environmentally protected and protect against cord slide. Grommets are also manufactured by us in Fair Lawn, NJ, color-coded by cable range for identification. Grommet material is Santoprene, Flame retardant: UV resistant and stabilized against copper and other metal-catalyzed degradation. Santoprene is UL 94 V-0 rated and UL 94 5VA rated. Detergent-resistant - Santoprene has excellent form and property retention in the presence of typical washdown detergents. Santoprene is FDA APPROVED and LATEX FREE Color Coded Sealing Grommet Santoprene* Seat Precisely in Connector Body, are Designed and Color Coded for SPECIFIC Cable Ranges. Provides a Liquid Tight Connection. Material Allows Cable to be Pulled Easily, Yet Holds Irregular Cable Securely Also Available CG Kits 1 Package Fts All Cable Ranges for EACH Trade Size True Cut Threads NPT Threads Precision Machined from Solid Stainless Steel Bar Stock UL Listed Locknut & Sealing Washer Purchsed Separately EZ-Torque Hex Design Nut Solid Alloy Steel Precision Machined Compression Nut, Grips Tight & Right Vibration Resistant Chamfered Dome Sheds Moisture NPT Threads Precision Machined Steel Compression Ring Prevents Distortion of the Sealing Grommet Exclusive Engineered Design Slips on Quickly & Grips the Jacket of the Cable, & Uniformly Compresses Sealing Grommet. Assures a Perfect Moisture Seal, While Fully Preventing Pullout Under Extreme Conditions Solid Corrosion Resistant Alloy Steel Body *** Precision Machine Cut Threads - Never Flatten,Never Cross Consistent Centerline to Compression Nut Guarantees Environmentally Sealing All Cords Correctly Operating Temperature Range (normal use): -20ºC to +105ºC (-4°F to +221°F) Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated Liquid Tight NPT Threads Federal Standard A-A-50553 UL Rated Suitable for Hazardous Locations NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a), 503-3(a) CSA Standard: C22.2 No. 18F RoHS and REACH Compliant CA Prop 65 Compliant UNSPC 39121719 AMFTGS.com Options: Size Range by Material Offering: * Alloy Steel 3/8” – 3“ * Aluminum – Copper-Free 1/2” – 1“ Add Suffix AL to Cat # * Stainless Steel Type 316 1/2” – 1” Add Suffix SST Cat# CG Kits 1/2”-1” Stl, SS and Aluminum One Kit Fits Entire Range All CG Series Configurations Available: Straights, 90°, 45°, Wire Mesh Strain Relief Grip Connectors with Multiple Hole Cable Entry TYPE SE Service Entrance Flat Cable Connectors Non-Metallic Cord Grip Connectors Locknuts Nuts & Sealing Washers Available Sold Separately t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 2 Cord Grips 2020 Selection Guide Cord & Cable Diameters ** While cords and cables are manufactured to certain standards, the application and use of the correct cord considrationThe following is provided as a guide **. Type of Cord AWG Size of Conductors SVO, SVTO SJ, SJO, SJT, SJTO S, SO, ST, STO Type W power cord BUS DROP CABLE 18 18 16 14 12 10 18 16 14 12 10 8 6 4 2 6 4 3 2 1 1/0 2/0 3/0 4/0 250 14 12 10 8 6 4 2 Number of Conductors-Approximate O.D.* in Inches 2 Conductor 3 Conductor 4 Conductor — .235 .255 .335 .290 .320 .320 .340 .385 .350 .375 .415 .430 .445 .500 .560 .600 .680 .345 .365 .390 .370 .390 .415 .500 .530 .570 .575 .600 .650 .625 .660 .710 .675 .725 .780 .795 .865 .900 .900 .975 1.100 1.105 1.170 1.290 .930 1.010 1.100 1.080 1.170 1.270 1.170 1.240 1.340 1.270 1.340 1.480 1.440 1.510 1.680 1.520 1.650 1.790 1.650 1.750 1.930 1.770 1.890 2.070 1.920 2.040 2.260 — 2.390 — — — .400 — .440 — — .500 — — .665 — — .815 — — .955 — — 1.175 — ® * Outer Diameters of cables shown are nominal dimensions and may vary with by min/max and also by manufacturer. Designation to Letter Codes: S = Severe Service Cord – 600 volts (also 277/480 or 480) – May be utilized in place of SJ or SV in extra-severe service SJ = Junior Severe Service – 300 volts (also 120 or 120/208 or 120/240 or 240 or 277, but not 277/480) SVT = Vacuum cleaner cord, or light duty cord Power cables transfer energy from a source to equipment. Control cables send signals to control the functioning of equipment. Products include cables that range H = Heat Resistant HH High Heat Resistant N = Nylon Outer Jacket Material O = Oil-Resistant Outer Jacket OO = Oil-Resistant Outer Jacket and Oil-Resistant Interior Insulation P = Parallel Cord (conductors are not twisted around each other) V = Vacuum Cord – 300 volts (typically used with vacuum cleaners and other portable cleaning equipment) W-A = Weather Resistant (UL approved for indoor and outdoor use) W = Weather and Water Resistant (CSA approved for indoor and outdoor use) ® Since 1946 ** This chart is prepared as a guidline for imformational purposes only. Dimensions may vary by cable manufacturer. AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 3 AMERICAN FITTINGS Corporation ® Cord Grip Connectors Dimensions Table 1 Trade Sizes 1/2” to 1” A Since 1946 Industrial SPEC-grade C NPT B Hex E D Trade Cat # Size Single Part CG1238AM 3/8" CG1838AM 3/8" CG3138AM 3/8" 1/2" Each Kit CG1250AM CG1 (1) 1/2" Covers 1/2" This Range CG50A250 CG1850AM 1/2" CG2 (1) 1/2" CG50K CG50A350 1/2" 1/2" 1/2” CG3150AM 1/2" .150-.650 CG3150AM CG3 (1) 1/2" CG50A450 1/2" CG3750AM 1/2" CG4 (1) 1/2" CG50A560 1/2" CG5050AM 1/2" CG5 (1) 1/2" CG50A650 1/2" CG6250AM 1/2" CG1275AM 3/4" CG6 (1) 3/4" CG75A250 3/4" CG7 (1) 3/4" CG75A350 3/4" 3/4" CG75K CG2575AM (1) 3/4" 3/4” CG8 CG75A450 3/4" .150-.880 CG3775AM 3/4" CG9 (1) 3/4" CG75A560 3/4" CG7550AM 3/4" CG10 (1) 3/4" CG75A650 3/4" CG6275AM 3/4" CG11 (1) 3/4" CG75B750 3/4" CG12 (1) 3/4" CG75B850 3/4" CG7575AM 3/4" CG37100AM 1" CG13 (1) 1" CG100B560 *** 1" CG50100AM 1" CG14 (1) 1" CG100K CG100B650 *** 1" CG62100AM 1" 1” 1" .375-.750 CG15 (1) CG100B750 *** 1" CG16 (1) 1" CG100B850*** 1" CG75100AM 1" CG17 (1) 1" CG100C950*** 1" CG100KLG CG87100AM 1" 1” CG18 (1) 1" 1" .750-1.125 CG100C1050*** CG100100AM 1" CG KIT Cat # Cable Ranges Min Max .125 .187 .187 .312 .312 .437 .125 .187 .150 .250 .150 .250 .187 .312 .250 .350 .250 .350 .312 .437 .312 .437 .350 .450 .350 .450 .375 .500 .450 .560 .450 .560 .500 .625 .560 .650 .560 .650 .625 .750 .125 .250 .150 .250 .150 .250 .250 .350 .250 .350 .250 .375 .350 .450 .350 .450 .375 .500 .450 .560 .450 .560 .500 .625 .560 .650 .560 .650 .625 .750 .650 .750 .650 .750 .750 .850 .750 .850 .750 .875 .375 .500 .450 .560 .450 .560 .500 .625 .560 .650 .560 .650 .625 .750 .650 .750 .650 .750 .750 .850 .750 .850 .750 .875 .850 .950 .850 .950 .875 1.000 .950 1.050 .950 1.050 1.000 1.125 Grommet Color Red Brown Yellow Red Red Red Brown White White Yellow Yellow Blue Blue Purple Green Green Pink Brown Brown Orange Blue Red Red White White Green Blue Blue Purple Green Green Pink Brown Brown Orange Yellow Yellow Purple Purple Grey Purple Green Green Pink Brown Brown Orange Yellow Yellow Purple Purple Grey Grey Grey Red Black Black Blue A Length 1-1/4" 1-1/4" 1-1/4" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-1/4" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-5/16" 1-9/16" 1-5/8" 1-5/16" 1-3/8" 1-5/16" 1-3/8" 1-5/8" 1-5/16" 1-3/8" 1-5/8" 1-5/16" 1-3/8" 1-5/8" 1-5/16" 1-3/8" 1-5/8" 1-9/16" 1-5/8" 1-9/16" 1-5/8" 1-5/8" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-13/16" 1-13/16" 1-3/4" 1-13/16" 1-13/16" 1-3/4" 1-13/16" B Hex 7/8" 7/8" 7/8" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 7/8" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/4" 1-1/4" 1-3/16" 1-3/16" 1-3/16" 1-3/16" 1-1/4" 1-3/16" 1-3/16" 1-1/4" 1-3/16" 1-3/16" 1-1/4" 1-3/16" 1-3/16" 1-1/4" 1-1/4" 1-5/16" 1-1/4" 1-5/16" 1-1/4" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-1/2" 1-1/2" 1-9/16" 1-1/2" 1-1/2" 1-9/16" 1-1/2" C Diameter 15/16" 15/16" 15/16" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 15/16" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-7/16" 1-7/16" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-7/16" 1-1/4" 1-1/4" 1-7/16" 1-1/4" 1-1/4" 1-7/16" 1-1/4" 1-1/4" 1-7/16" 1-7/16" 1-3/8" 1-7/16" 1-3/8" 1-7/16" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-11/16" 1-11/16" 1-5/8" 1-11/16" 1-11/16" 1-5/8" 1-11/16" D Thread Length 7/16" 7/16" 7/16" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 7/16" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 9/16" 1/2" 9/16" 1/2" 9/16" 9/16" 1/2" 9/16" 9/16" 1/2" 9/16" 9/16" 1/2" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 5/8" 11/16" 11/16" 5/8" 11/16" 11/16" 5/8" Other Trade Sizes Continued on Next Page (1) Only these Cat #’s are furnished with a locknut & sealing washer. All other items locknut & washer are sold separately. AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ Wt. Per/C 8 8 8 12 12 10 12 12 10 12 8 12 10 12 12 10 12 12 10 16 18 18 16 18 16 18 18 16 18 18 16 18 18 16 18 20 18 20 18 18 26 30 26 26 30 26 26 30 26 30 26 28 30 28 28 30 28 28 Page 2 e: info@amftgs.com Specifications Subject to Change Without Notice 4 AMERICAN FITTINGS Corporation ® Cord Grip Connectors Dimensions Table 2 Trade Sizes 1-1/4” to 3” A Since 1946 Industrial SPEC-grade C NPT B Hex Cat # Single Parts CG125C850 CG19 (1) CG75125AM CG125C950 CG20 (1) CG87125AM CG125D1050 CG21 (1) CG100125AM CG125D1150 CG22 (1) CG112125AM CG125D1250 CG23 (1) CG125D1375 CG24 (1) CG125125AM CG137125AM CG150D1050 CG25 (1) CG150D1150 CG26 (1) CG150D1250 CG27 (1) CG115150AM CG150D1375 CG28 (1) CG128150AM CG150E1500 CG29 (1) CG150E1630 CG30 CG150E1750 CG31 (1) CG150E1880 CG32 (1) CG200F1380 CG33 (1) CG200F1500 CG34 (1) CG200F1630 CG35 (1) CG153200AM CG200F1750 CG36 (1) CG200F1810 CG37 (1) CG200F1880 CG38 (1) CG200F1940 CG39 (1) CG200F2060 CG40 (1) CG250G1965 CG250G2187 CG250G2360 CG250G2565 CG300H2365 CG300H2565 CG300H2755 CG300H2985 CG300H3220 E Trade Cable Ranges Size Min Max 1-1/4" .750 .850 1-1/4" .750 .850 1-1/4" .750 .875 1-1/4" .850 .950 1-1/4" .850 .950 1-1/4" .875 1.000 1-1/4" .950 1.050 1-1/4" .950 1.050 1-1/4" 1.000 1.125 1-1/4" 1.050 1.150 1-1/4" 1.050 1.150 1-1/4" 1.125 1.250 1-1/4" 1.150 1.250 1-1/4" 1.150 1.250 1-1/4" 1.250 1.375 1-1/4" 1.250 1.375 1-1/4" 1.250 1.375 1-1/4" 1.375 1.500 1-1/2" .950 1.050 1-1/2" .950 1.050 1-1/2" 1.050 1.150 1-1/2" 1.050 1.150 1-1/2" 1.150 1.250 1-1/2" 1.150 1.250 1-1/2" 1.156 1.312 1-1/2" 1.250 1.375 1-1/2" 1.250 1.375 1-1/2" 1.281 1.531 1-1/2" 1.380 1.500 1-1/2" 1.380 1.500 1-1/2" 1.500 1.630 1-1/2" 1.500 1.630 1-1/2" 1.630 1.750 1-1/2" 1.630 1.750 1-1/2" 1.750 1.880 1-1/2" 1.750 1.880 2" 1.250 1.380 2" 1.250 1.380 2" 1.380 1.500 2" 1.380 1.500 2" 1.500 1.630 2" 1.500 1.630 2" 1.531 1.780 2" 1.630 1.750 2" 1.630 1.750 2" 1.690 1.810 2" 1.690 1.810 2" 1.750 1.880 2" 1.750 1.880 2" 1.810 1.940 2" 1.810 1.940 2" 1.940 2.060 2" 1.940 2.060 2-1/2" 1.750 1.965 2-1/2" 1.970 2.185 2-1/2" 2.150 2.365 2-1/2" 2.350 2.565 3" 2.150 2.365 3" 2.350 2.565 3" 2.540 2.755 3" 2.760 2.985 3" 2.995 3.220 Grommet Color Purple Purple Grey Grey Grey Red Black Black Blue Orange Orange Brown Red Red White White Green Yellow Black Black Orange Orange Red Red Purple White White Pink Blue Blue Green Green Brown Brown Purple Purple Red Red Blue Blue Green Green Orange Brown Brown Yellow Yellow Purple Purple White White Orange Orange White Orange Brown Green Brown Green Blue Grey Yellow D A Length 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-9/16" 1-15/16" 1-7/8" 1-7/8" 1-15/16" 1-7/8" 1-7/8" 1-15/16" 1-7/8" 1-15/16" 1-7/8" 1-7/8" 1-7/8" 1-15/16" 1-15/16" 1-15/16" 1-15/16" 1-15/16" 1-15/16" 1-15/16" 1-15/16" 1-15/16" 1-7/8" 2-1/8" 2-1/8" 2-1/8" 2-1/8" 2-1/8" 2-1/8" 2-1/8" 2-1/8" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 3" 3" 3" 3" 3-5/16" 3-5/16" 3-5/16" 3-5/16" 3-5/16" B Hex 1-13/16" 1-13/16" 1-7/8" 1-13/16" 1-13/16" 1-5/8" 2" 1-7/8" 1-7/8" 2" 1-7/8" 1-7/8" 2" 1-7/8" 2" 1-7/8" 1-7/8" 1-7/8" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 3-15/16" 3-15/16" 3-15/16" 3-15/16" 3-15/16" C Diameter 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 2-1/16" 2-1/8" 1-7/8" 2-1/16" 2-1/8" 2-1/8" 2-1/16" 2-1/8" 2-1/16" 2-1/8" 2-1/8" 2-1/8" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-3/8" 2-5/16" 2-5/16" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 3-3/8" 3-3/8" 3-3/8" 3-3/8" 4" 4" 4" 4" 4" D Thread Length 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 3/4" 11/16" 3/4" 11/16" 3/4" 11/16" 11/16" 3/4" 11/16" 11/16" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" (1) Only these Cat #’s are furnished with a locknut & sealing washer. All other items locknut & washer are sold separately. AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ Wt. Per/C 44 48 42 44 48 42 40 46 40 40 46 40 40 46 40 46 40 40 66 70 66 70 66 70 60 66 70 60 60 66 60 66 60 66 60 66 104 112 104 112 104 112 102 104 112 104 106 104 106 104 106 104 106 155 155 155 155 214 214 214 214 214 Page 3 e: info@amftgs.com Specifications Subject to Change Without Notice 5 AMERICAN FITTINGS Corporation ® Cord Grip Connector Kits Since 1946 Size Range: 1/2” to 1” Product Series: CGK Series Cord Grip Cable Glands Materials: Alloy Steel Zinc Plated with Chromate Finish T316 Stainless Steel and Aluminum (CU Free) Material Options* A EZ Industrial SPEC-grade CG KITS ™ C NPT B Hex E D CAT # * Trade/Hub Size Cord Grip Kits GCG50K 1/2" CG75K 3/4" CG100K 1" CG100KLG 1" *Add AL to Cat # for Aluminum Cord Grips Add SST to Cat# for Stainless Steel Cable Range Min .125" .125" .375" .750" A B C D Wt. Max. Length Hex Dia. Thread Lgth Per/C .650" 1-1/4" 7/8" 15/16" 7/16" 11 .880" 1-3/8" 1-3/16" 1-3/8" 9/16" 20 .750" 1-3/4" 1-7/16" 1-1/2" 11/16" 30 1.125" 1-13/16" 1 -1/2" 1-5/8" 11/16" 34 All CG Grommets are molded by American Fittings in NJ. Grommets are Santoprene an FDA Approved material. Wt. Per/C AL 6 12 18 20 Each Hub Sized Kit Covers These Ranges: 1/2 “ Fits Cable Ranges . 125 to .650 OD 3/4” Fits Cable Ranges .125 to .880 OD 1” Fits Cable Ranges .375 to .750 OD 1” Lg Fits Cable Ranges .750 to 1.125 OD Each Kit Contains: 1 Fully Assembled Cord Grip Numerous Grommets to Precisely Fit Your Cable. Color Coded Chart for Sizes Included in Each Kit Compliances: Kits Available in Steel, Aluminum or Stainless Steel Certified Made in the USA UL 514B NEMA Standard FB1 Rated Liquid Tight Federal Standard A-A-50553 Grommet Santoprene UL 94V-0 FDA Approved UL Rated Suitable for Hazardous Locations NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a), 503-3(a) CSA Standard: C22.2 No. 18F RoHS and REACH Compliant CA Prop 65 Compliant UNSPC 39121719 AMFTGS.com Locknuts nd Sealing Washers Sold Separately t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 6 AMERICAN FITTINGS Corporation ® CG Kits Cross Reference Chart Since 1946 Each AMFICO Cord Grip Package contains 1 trade size fitting and numerous COLOR CODED grommets to fit a multitute of cable ranges. CG One Package, One Price, One SKU It’s that Simple! AMERICAN FITTINGS Cord Range in Package T&B Cord Range Cat # 1/2" .125-.650 CG50K APPLETON Cat # Cord Range Cat # HUBBELL RACO Cord Range Cat # CCH Cord Range REMKE Cat # Cord Range Cat # .125-.250 2520 .125-.187 CG-1250S .125-.250 3702-1 .150-.250 CG50 250 .125-.188 RSRS-103 .250-.375 2521 .187-.312 CG-1850S .250-.375 3702-2 .250-.350 CG50 350 .188-.250 RSRS-104 .375-.500 .450-.560 .500-.625 2522 2523 2524 .312-.437 .375-.500 .500-.625 CG-3150S CG-3750S CG-5050S .375-.425 .425-.500 .375-.500 .500-.600 3702-3 3702-4 3702-5 3702-6 .350-.450 .450-.560 .560-.650 CG50 450 CG50 560 CG50 650 .250-.312 .312-.375 .375-.438 .438-.500 RSRS-105 RSRS-106 RSRS-107 RSRS-108 .500-.562 RSRS-109 .562-.625 RSRS-110 This AMFICO 1/2” CG Kit Replaces This Many Competitors’ Sku’s NO SMALLER RANGE 3/4" .125-.880 CG75K NO SMALLER RANGE 2530 2531 .187-.250 .250-.375 CG-1275S CG-2575S .250-.375 .375-.500 3703-1 3703-2 .150-.250 .250-.350 CG75 250 CG75 350 .438-.500 RSRS-208 .500-.562 RSRS-209 .375-.500 2532 .375-.500 CG-3775S .500-.600 3703-3 .350-.450 CG75 450 .562-.625 .500-.625 .625-.700 .750-.880 2534 2535 2536 .500-.625 .625-.750 .750-.875 CG-5075S CG-6275S CG-7575S .600-.650 .650-.700 .700-.850 3703-4 3703-6 3703-5 .450-.560 .560-.650 .650-.750 .750-.850 CG75 560 CG75 650 CG75 750 CG75 850 .562-.688 RSRS-211 .625-.750 RSRS-212 .688-.812 RSRS-213 Limited Range .375-.750 CG100K .250-.375 2541 .375-.500 CG-37100S .375-.500 2542 .500-.625 CG-50100S .600-.700 .500-.625 .625-.750 2544 2545 .625-.750 CG-62100S .700-.850 This AMFICO 1” CG Kit Replaces This Many Competitors’ Sku’s 1" .750 -1.125 3704-1 .560-.650 CG100 650 .562-.625 RSRS-310 3704-2 .650-.750 CG100 750 .562-.688 RSRS-311 .625-.750 RSRS-312 .688-.812 RSRS-313 .700-.850 3704-2 .750-.850 CG100K-LG .875-.985 2547 .875-1.000 CG-87100S .850-1.000 3704-3 .850-.950 CG100 950 .880-1.065 2548 1.000-1.125 CG-100100S 4 AMFICO CG Kits Replaces This Many Four AMFICO CG Kits Competitors’ Sku’s Replaces This Many Competitors’ Sku’s AMFTGS.com 18 17 .500-.562 RSRS-309 CG-75100S Limited Range CG100 560 .750-.875 Limited Range 2546 This AMFICO 1” CG Kit Replaces This Many Competitors’ Sku’s RSRS-210 .450-.560 .750-.880 Wider Range NO SMALLER RANGE .125-.250 .250-.375 This AMFICO 3/4” CG Kit Replaces This Many Competitors’ Sku’s 1" NO SMALLER RANGE CG100 850 .950-1.050 CG100 1050 Limited Range 16 & With a Limited Range .688-.812 RSRS-313 .750-.875 RSRS-314 .812-.938 RSRS-315 .875-1.000 RSRS-316 18 23 7 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Cord Grips 90° Connectors Since 1946 Size Range: 1/2 - 1” Product Series: CG Connectors Specification Grade Material: Steel Construction with Stainless Steel Material Option* Grommet: Santoprene, UL 94 V-0 FDA Approved Zinc Plated with a Chromate Finish Industrial SPEC-grade Full FLAT HEX Surface with EZ Torque Steel Compression Nut & Steel Compresssion Ring Torques Tight & Right on Cord Made in the USA A C Options: Available Sealing Washer & Locknut D B E Cat # Trade Size 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1" 1" NPT Threads True 90° Angle for an EZ Cable Pull. No sharp binding edges or burrs to snag your cable. Cable Ranges A B C D E Thread Wt. Min Max Length Height Diameter Hex Length Per/C .150 .250 2-1/4" 1-13/16" 1-3/16" 1-1/8" 5/8" 24 .250 .350 2-1/4" 1-13/16" 1-3/16" 1-1/8" 5/8" 24 .350 .450 2-1/4" 1-13/16" 1-3/16" 1-1/8" 5/8" 24 .450 .560 2-1/4" 1-13/16" 1-3/16" 1-1/8" 5/8" 24 .560 .650 2-1/4" 1-13/16" 1-3/16" 1-1/8" 5/8" 24 .150 .250 2-1/2" 2-3/8" 1-7/16" 1-3/8" 5/8" 42 .250 .350 2-1/2" 2-3/8" 1-7/16" 1-3/8" 5/8" 42 .350 .450 2-1/2" 2-3/8" 1-7/16" 1-3/8" 5/8" 42 .450 .560 2-1/2" 2-3/8" 1-7/16" 1-3/8" 5/8" 42 .560 .650 2-1/2" 2-3/8" 1-7/16" 1-3/8" 5/8" 42 .650 .750 2-1/2" 2-1/4" 1-7/16" 1-3/8" 5/8" 36 .750 .850 2-1/2" 2-1/4" 1-7/16" 1-3/8" 5/8" 36 .450 .560 3" 2-3/4" 1-3/4" 1-11/16" 11/16" 72 .560 .650 3" 2-3/4" 1-3/4" 1-11/16" 11/16" 72 .650 .750 3" 2-3/4" 1-3/4" 1-11/16" 11/16" 72 .750 .850 3" 2-3/4" 1-3/4" 1-11/16" 11/16" 72 .850 .950 3-1/16" 2-3/4" 1-3/4" 1-11/16" 11/16" 68 .950 1.050 3-1/16" 2-3/4" 1-3/4" 1-11/16" 11/16" 68 CG50A25090 CG50A35090 CG50A45090 CG50A56090 CG50A65090 CG75A25090 CG75A35090 CG75A45090 CG75A56090 CG75A65090 CG75B75090 CG75B85090 CG100B56090 CG100B65090 CG100B75090 CG100B85090 CG100C95090 CG100C105090 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated Liquid Tight NPT Threads Federal Standard A-A-50553 UL Rated Suitable for Hazardous Locations NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a), 503-3(a) CSA Standard: C22.2 No. 18F RoHS and REACH Compliant CA Prop 65 Compliant E101868 UNSPC 39121719 AMFTGS.com Features: Precision Machined Cut Threads NPT Solid Grommet and Compression Ring Engages Cable Provides Exceptional Retention & Bend Radius Color Coded Grommet for Identification of Cord Range Available Options: * Material Option: For T316 Stainless Steel Add SST to Cat # ** Insulated Throat Bushing 105° UL Rating Factory Installed Bushing - Add Suffix “B” to Above Cat # Above Configuration with Wire Mesh Strain Relief Locknuts and Sealing Washer t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 8 AMERICAN FITTINGS Corporation ® Cord Grips 45° Connectors Since 1946 Size Range: 1/2 - 1” Product Series: CG Connectors Specification Grade Material: Steel Construction with Zinc Plated with a Chromate Finish Grommet: Santoprene, UL 94 V-0 FDA Approved Full FLAT HEX Surface with Industrial SPEC-grade EZ Torque Steel Compression Nut & Steel Compresssion Ring Torques Tight & Right on Cord Made in the USA C A Options: Available Sealing Washer & Locknut D B NPT Threads Cat # E Trade Size True 45° Angle for an EZ Cable Pull. No sharp binding edges or burrs to snag your cable. E Cable Ranges A B C D Wt. Thread Min Max Length Height Diameter Hex Per/C Length CG50A25045 1/2" .150 .250 CG50A35045 1/2" .250 .350 CG50A45045 1/2" .350 .450 CG50A56045 1/2" .450 .560 CG50A65045 1/2" .560 .650 CG75A25045 3/4" .150 .250 CG75A35045 3/4" .250 .350 CG75A45045 3/4" .350 .450 CG75A56045 3/4" .450 .560 CG75A65045 3/4" .560 .650 CG75B75045 3/4" .650 .750 CG75B85045 3/4" .750 .850 CG100B56045 1" .450 .560 CG100B65045 1" .560 .650 CG100B75045 1" .650 .750 CG100B85045 1" .750 .850 CG100C95045 1" .850 .950 CG100C105045 1" .950 1.050 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated Liquid Tight NPT Threads Federal Standard A-A-50553 UL Rated Suitable for Hazardous Locations NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a), 503-3(a) CSA Standard: C22.2 No. 18F RoHS and REACH Compliant CA Prop 65 Compliant E101868 UNSPC 39121719 AMFTGS.com 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-9/16" 2-9/16" 2-9/16" 2-9/16" 2-9/16" 2-9/16" 2-9/16" 3" 3" 3" 3" 3" 3" 1-15/16" 1-3/16" 1-1/8" 1-15/16" 1-3/16" 1-1/8" 1-15/16" 1-3/16" 1-1/8" 1-15/16" 1-3/16" 1-1/8" 1-15/16" 1-3/16" 1-1/8" 1-7/8" 1-7/16" 1-3/8" 1-7/8" 1-7/16" 1-3/8" 1-7/8" 1-7/16" 1-3/8" 1-7/8" 1-7/16" 1-3/8" 1-7/8" 1-7/16" 1-3/8" 1-7/8" 1-7/16" 1-3/8" 1-7/8" 1-7/16" 1-3/8" 2-3/16" 1-3/4" 1-11/16" 2-3/16" 1-3/4" 1-11/16" 2-3/16" 1-3/4" 1-11/16" 2-3/16" 1-3/4" 1-11/16" 2-3/16" 1-3/4" 1-11/16" 2-3/16" 1-3/4" 1-11/16" Features: Precision Machined Cut Threads NPT 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 22 22 22 22 22 36 36 36 36 36 30 30 60 60 60 60 64 64 Solid Lockt Grommet and Compression Ring Provide Exceptional Retention & Bend Radius Color Coded Grommet for Identification of Cord Range Available Options: *Insulated Throat Bushing 105° UL Rating Factory Installed Bushing - Add Suffix “B” to Above Cat # Above Configuration with Wire Mesh Strain Relief Locknuts and Sealing Washer t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 9 AMERICAN FITTINGS Corporation ® Cord Grips with Multi-Hole Entries Since 1946 Industrial SPEC-grade Size Range: 1/2 - 3/4” Product Series: CGMH - Multi Hole Grommets Material: Alloy Steel* Construction with Zinc Plated with a Chromate Finish *Available in AL and Stainless Steel Made in the USA C HEX Full FLAT HEX Surface with EZ Torque Steel Compression Nut & Steel Compresssion Ring Torques Tight & Right A 3 B 2 2 NPT Options: Available Sealing Washer & Locknut D Cat # Trade Size” CG50A2222H 1/2 CG50A2223H # of Entry Holes Cord Range Min & Max A Length B Dia. C Hex D Length 2 .150 to .222 15/16 7/16 11/32 1/2 1/2 3 .150 to .222 15/16 7/16 11/32 1/2 CG75A2222H 3/4 2 .150 to .222 1 3/8 7/16 11/32 9/16 CG75A2223H 3/4 3 .150 to .222 1 3/8 7/16 11/32 9/16 Compliances: UL 514B UL Rated Suitable for Hazardous Locations NEMA Standard FB1 NEMA 4x* Federal Standard A-A-50553 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 NEC 501-4(b), 505-4(a), 503-3(a) * RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121312 AMFTGS.com Features: Precision Machined Cut NPT Threads NPT Tapered Hub for Liquid Tight Connection with NPT Female Solid Steel Retainer Ring Safe Guards Cable Compresses Grommet for Non-Abrasive Wear on Cable Twice the Strenght & Corrosion Resistance Over Die-Cast Fittings t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 10 AMERICAN FITTINGS Corporation ® Cord Grips for Service Entrance UF Size Range: 1/2 - 3/4” Type UF Underground Feeder Cable Connector Product Series: CGUF Connectors Specification Grade Material: Alloy Steel Construction with Zinc Plated with a Chromate Finish Made in the USA Since 1946 Industrial SPEC-grade Full FLAT HEX Surface with EZ Torque Steel Compression Nut & Steel Compresssion Ring Torques Tight & Right Low Profile Design to Accomodate Newer and Smaller UF Cables and Traditional UF Sized. C HEX A Options: Available Sealing Washer & Locknut B NPT D For Securing A\and Sealing Service Entrance and UF, SE, SEU Cable Entering an Enclosure or Conduit Hub. Cat # Trade Size A Lgth B Dia UF50 1/2 1 5/16 1 3/32 UF5075 3/4 1 5/16 UF75 3/4 1 3/8 C Hex D Thread Lgth Type UF Cable Range 1 1/32 1/2 14-2, 12-2 W and WO Ground 1 3/32 1 1/32 17/32 14-2, 12-2 W and WO Ground 1 3/32 2 1/32 17/32 14-3, 12-3, 10-3 W and WO Ground Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated NEMA 4x Liquid Tight NPT Threads Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F Features: Precision Machined Cut NPT Threads NPT Tapered Hub for Liquid Tight Connection with NPT Female Neoprene Grommet Provides Liquid Tight Entry and Protects Oil and Other Contaminants Solid Steel Retainer Ring Safe Guards Cable Compresses Grommet for Non-Abrasive Wear on Cable RoHS and REACH Compliant CA Prop 65 Compliant Twice the Strenght & Corrosion Resistance Over Die-Cast Fittings UNSPC 39121431 E101868 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 11 AMERICAN FITTINGS Corporation ® Cord Grips Non-Metallic Nylon Since 1946 Industrial SPEC-grade Size Range: 1/2 - 3/4” Types S, SO, STO, SJ, SJT, SJTO, and SVO Portable Cords Product Series: NMCG Connectors Specification Grade Material: Type 6 Nylon UV Stabilized UL 95VO Rating Low Profile Design with Domed Top Sheds Liquids C A B NPT Threads Options: Available Sealing Washer & Locknut NMCG cord grips also provide mechanical strain relief as well as a liquid-tight seal. They are NEMA 4X raintight and watertight construction for outdoor use. Unique high-quality neoprene compression grommet covers a large cable range, reducing the number of dedicated cable range fittings required. Cat # NMCG50-1 NMCG50-2 NMCG75-1 NMCG75-2 NMCG100-1 NMCG100-2 A Overall Length 1.968” 1.968” 2.007” 2.007” 2.401” 2.401” Cable Range MIN MAX .170 .260 .236 .472 .250 .480 .472 .709 .470 .680 .669 .984 Trade Size 1/2” 1/2” 3/4” 3/4” 1” 1” A neoprene bushing seals out oils, coolants, water, dust, and other abusive agents. NCG Cord Grip Connectors may be used with types S, SO, STO, SJ, SJT, SJTO, and SVO portable cords. It provides a true bend radius for all portable cords. Environmental Rating: IP68 • NEMA 4X Watertight RoHS Compliant REACH Compliant AMFTGS.com Optional Locknut Nut & Sealing Washer Available E101868 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ UNSPC 39121431 .945” .945” 1.299” 1.299” 1.653” 1.653” Watertight cord grips that terminate and protect conductors from mechanical damage due to vibration and movement. CUL to CSA Standard C22.2 No.18 t C Features: Body and Compression Nut: Type 6 Nylon Color: Grey Grommet: Oil Resistant Neoprene Material is UV Stabilized Compliances: UL 514B NEMA Standard FB1 Temperature Range: -30° to 105°C Temperature Range Short Term: 150°C Flame Resistance: UL 94-VO UNSPSC 39121431 B Thread Length .590” .590” .590” .590” .748” .748” e: info@amftgs.com Specifications Subject to Change Without Notice 12 AMERICAN FITTINGS Corporation ® CG Straight Connector with Mesh SR Since 1946 Industrial SPEC-grade Size Range: 1/2” - 2” Product Series: CGGT Cord Grip with Wire Mesh Strain Relief Grips Materials: Connector Solid Alloy Steel Construction Wire Mesh T316 Stainless Steel Grommet: Santoprene, UL 94 V-0 FDA Approved Ideal Uses: On-machine Wiring HVAC Applications Food Processing OEM Equipment Chemical Plants Mines Machine Tool Shops Motor Connections Fitting is Zinc Plated with a Chromate Finish Made in the USA Features: Precision Machined Cut Threads NPT Solid Steel Construction Connector Construction ProvidesTwice the Strength and Durability of ALL Die Cast and Malleable Products UL Listed for use with flexible cords, including Type S, SO, STO, ST, SJ, SJT, SJTO and SVO. Full FLAT HEX Surface with EZ Torque Steel Compression Nut & Steel Compresssion Ring Torques Tight & Right On Cord Suitable for Wet Locations When a Sealing Washer is Used Between Connector;s NPT Threads and NPT Threaded Enclosure. For Non-Threaded Enclosures The Addition of a Locknut and Sealing Washer are Required, Sold Separately. Easily Installed on .250" to 2.60" Cable Diameter Range 1/2” to 2” Hub - See Chart Pg 2 Compliances: Certified Made in the USA UL 514 B, 467 Grommet is UL Rated 94V0 and UL94 5KVA FDA Approved NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com Features: For Use Indoor & Outdoor Applications NPT Straight Male Thread Single Weave Variable Stainless Steel Mesh Provides additional Holding Power In Abrasive Environments One-Piece Design Mesh Integrated into Connector Body Water Tight & Dust-Tight Seal Optional: Insulating Throat Bushing 105° c Rated Industrial Grade Steel Locknuts and Sealing Washers t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 13 AMERICAN FITTINGS Corporation ® CG Straight Connector with Mesh SR Since 1946 Size Range: 1/2” - 2” Page 2 Dimensions Product Series: CGGT Cord Grip with Wire Mesh Strain Relief Grips Industrial SPEC-grade C A B D Cat # CG50A250GT CG50A350GT CG50A450GT CG50A560GT CG50A650GT CG75A250GT CG75A350GT CG75A450GT CG75A560GT CG75A650GT CG75B750GT CG75B850GT CG100B560GT CG100B650GT CG100B750GT CG100B850GT CG100C950GT CG100C1050GT CG125C850GT CG125C950GT CG125D1050GT CG125D1150GT CG125D1250GT CG125D1375GT CG150D1050GT CG150D1150GT CG150D1250GT CG150D1375GT CG150E1500GT CG150E1630GT CG150E1750GT CG150E1880GT CG200F1380GT CG200F1500GT CG200F1630GT CG200F1750GT CG200F1810GT CG200F1880GT CG200F1940GT CG200F2060GT Trade Size Cable Ranges Min Max 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2" 2" 2" 2" 2" 2" 2" 2" .150 .250 .350 .450 .560 .150 .250 .350 .450 .560 .650 .750 .450 .560 .650 .750 .850 .950 .750 .850 .950 1.050 1.150 1.250 .950 1.050 1.150 1.250 1.380 1.500 1.630 1.750 1.250 1.380 1.500 1.630 1.690 1.750 1.810 1.940 AMFTGS.com .250 .350 .450 .560 .650 .250 .350 .450 .560 .650 .750 .850 .560 .650 .750 .850 .950 1.050 .850 .950 1.050 1.150 1.250 1.375 1.050 1.150 1.250 1.375 1.500 1.630 1.750 1.880 1.380 1.500 1.630 1.750 1.810 1.880 1.940 2.060 A Length B Diameter 2" 2" 2" 2" 2" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2-3/16" 2" 2" 2" 2" 2-1/16" 2-1/16" 2-1/8" 2-1/8" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-7/16" 2-7/16" 2-7/16" 2-7/16" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 1-5/8" 1-5/8" 1-5/8" 1-5/8" 1-5/8" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-3/8" 1-3/8" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-5/8" 1-5/8" 1-7/8" 1-7/8" 2-1/16" 2-1/16" 2-1/16" 2-1/16" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" 2-7/8" t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ C Mesh Length 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 9-1/2" 9-1/2" 6" 6" 6" 6" 9-1/2" 9-1/2" 9" 9" 9-1/2" 9-1/2" 9-1/2" 9-1/2" 9-1/2" 9-1/2" 9-1/2" 9-1/2" 12" 12" 12" 12" 12" 12" 12" 12" 14" 14" 14" 14" D Thread Length 1/2" 1/2" 1/2" 1/2" 1/2" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 11/16" 11/16" 11/16" 11/16" 5/8" 5/8" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" Wt. Per/C 12 12 12 12 12 16 16 16 16 16 26 26 30 30 30 30 36 36 49 49 52 52 52 52 76 76 76 76 78 78 78 78 124 124 124 124 124 124 124 124 e: info@amftgs.com Specifications Subject to Change Without Notice 14 AMERICAN FITTINGS Corporation ® CG 90° Connector with Mesh SR Since 1946 Industrial SPEC-grade Size Range: 1/2” - 1” Product Series: CGGT Cord Grip with Wire Mesh Strain Relief Grips Materials: Body MI Compression Nut Steel Construction Wire Mesh T316 Stainless Steel Grommet: Santoprene, UL 94 V-0 FDA Approved Ideal Uses: On-machine Wiring HVAC Applications Food Processing OEM Equipment Chemical Plants Mines Machine Tool Shops Motor Connections Fitting is Zinc Plated Made in the USA Features: Precision Machined Cut Threads NPT Solid Steel Construction UL Listed for use with flexible cords, including Type S, SO, STO, ST, SJ, SJT, SJTO and SVO. Full FLAT HEX Surface with EZ Torque Steel Compression Nut & Steel Compresssion Ring Torques Tight & Right On Cord Suitable for Wet Locations When a Sealing Washer is Used Between Connector;s NPT Threads and NPT Threaded Enclosure. For Non-Threaded Enclosures The Addition of a Locknut and Sealing Washer are Required, Sold Separately. Easily Installed on .250" to 1.050" Cable Diameter Range 1/2” to 1” Hub - See Chart Pg 2 Compliances: Certified Made in the USA UL 514 B, 467 Grommet is UL Rated 94V0 and UL94 5KVA FDA Approved NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com Features: For Use Indoor & Outdoor Applications NPT Straight Male Thread Single Weave Variable Stainless Steel Mesh Provides additional Holding Power In Abrasive Environments One-Piece Design Mesh Integrated into Connector Body Water Tight & Dust-Tight Seal Optional: Insulating Throat Bushing 105° c Rated Industrial Grade Steel Locknuts and Sealing Washers t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 15 AMERICAN FITTINGS Corporation ® CG 90° Connector with Mesh SR Since 1946 Industrial SPEC-grade Size Range: 1/2” - 1” Page 2 Dimensions Product Series: CGGT Cord Grip with Wire Mesh Strain Relief Grips D A B E C Cat # Trade Size CG50A25090GT CG50A35090GT CG50A45090GT CG50A56090GT CG50A65090GT CG75A25090GT CG75A35090GT CG75A45090GT CG75A56090GT CG75A65090GT CG75B75090GT CG75B85090GT CG100B56090GT CG100B65090GT CG100B75090GT CG100B85090GT CG100C95090GT CG100C105090GT 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1" 1" AMFTGS.com Cable Ranges Min Max A Length B Height C Diameter .150 .250 .350 .450 .560 .150 .250 .350 .450 .560 .650 .750 .450 .560 .650 .750 .850 .950 2-9/16" 2-9/16" 2-9/16" 2-9/16" 2-9/16" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 3-3/16" 3-3/16" 3-3/16" 3-3/16" 3-5/8" 3-5/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 1-3/16" 1-3/16" 1-3/16" 1-3/16" 1-3/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-13/16" 1-13/16" 1-13/16" 1-13/16" 1-13/16" 1-13/16" .250 .350 .450 .560 .650 .250 .350 .450 .560 .650 .750 .850 .560 .650 .750 .850 .950 1.050 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ D Mesh Length 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 5-1/2" 5-1/2" 5-1/2" 5-1/2" 5-1/2" 9" 9" 6-1/2" 6-1/2" 6-1/2" 6-1/2" 7-1/2" 7-1/2" E Thread Length 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" Wt. Per/C 28 28 28 28 28 44 44 44 44 44 40 40 74 74 74 74 74 74 e: info@amftgs.com Specifications Subject to Change Without Notice 16 AMERICAN FITTINGS Corporation ® CG 45° Connector with Mesh SR Since 1946 Industrial SPEC-grade Size Range: 1/2” - 1” Product Series: CGGT Cord Grip with Wire Mesh Strain Relief Grips Materials: Body MI Compression Nut Steel Construction Wire Mesh T316 Stainless Steel Grommet: Santoprene, UL 94 V-0 FDA Approved Ideal Uses: On-machine Wiring HVAC Applications Food Processing OEM Equipment Chemical Plants Mines Machine Tool Shops Motor Connections Fitting is Zinc Plated Made in the USA Features: Precision Machined Cut Threads NPT Solid Steel Construction UL Listed for use with flexible cords, including Type S, SO, STO, ST, SJ, SJT, SJTO and SVO. Full FLAT HEX Surface with EZ Torque Steel Compression Nut & Steel Compresssion Ring Torques Tight & Right On Cord Suitable for Wet Locations When a Sealing Washer is Used Between Connector;s NPT Threads and NPT Threaded Enclosure. For Non-Threaded Enclosures The Addition of a Locknut and Sealing Washer are Required, Sold Separately. Easily Installed on .250" to 1.050" Cable Diameter Range 1/2” to 1” Hub - See Chart Pg 2 Compliances: Certified Made in the USA UL 514 B, 467 Grommet is UL Rated 94V0 and UL94 5KVA FDA Approved NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com Features: For Use Indoor & Outdoor Applications NPT Straight Male Thread Single Weave Variable Stainless Steel Mesh Provides additional Holding Power In Abrasive Environments One-Piece Design Mesh Integrated into Connector Body Water Tight & Dust-Tight Seal Optional: Insulating Throat Bushing 105° c Rated Industrial Grade Steel Locknuts and Sealing Washers t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 17 AMERICAN FITTINGS Corporation ® CG 45° Connector with Mesh SR Since 1946 Industrial SPEC-grade Size Range: 1/2” - 1” Page 2 Dimensions Product Series: CGGT Cord Grip with Wire Mesh Strain Relief Grips A D B C E Cat # Trade Size CG50A25045GT CG50A35045GT CG50A45045GT CG50A56045GT CG50A65045GT CG75A25045GT CG75A35045GT CG75A45045GT CG75A56045GT CG75A65045GT CG75B75045GT CG75B85045GT CG100B56045GT CG100B65045GT CG100B75045GT CG100B85045GT CG100C95045GT CG100C105045GT 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1" 1" AMFTGS.com Cable Ranges Min Max A Length B Height C Diameter .150 .250 .350 .450 .560 .150 .250 .350 .450 .560 .650 .750 .450 .560 .650 .750 .850 .950 2-5/8" 2-5/8" 2-5/8" 2-5/8" 2-5/8" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 3-1/8" 3-1/8" 3-1/8" 3-1/8" 3-1/2" 3-1/2" 1-11/16" 1-11/16" 1-11/16" 1-11/16" 1-11/16" 2" 2" 2" 2" 2" 2" 2" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 2-1/4" 1-3/16" 1-3/16" 1-3/16" 1-3/16" 1-3/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-7/16" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" .250 .350 .450 .560 .650 .250 .350 .450 .560 .650 .750 .850 .560 .650 .750 .850 .950 1.050 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ D Mesh Length 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 9" 9" 6-1/2" 6-1/2" 6-1/2" 6-1/2" 7-1/2" 7-1/2" E Thread Length 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" Wt. Per/C 25 25 25 25 25 36 36 36 36 36 34 34 63 63 63 63 64 64 e: info@amftgs.com Specifications Subject to Change Without Notice 18 AMERICAN FITTINGS Corporation ® CG Wide Range Grip with Mesh SR Since 1946 Industrial SPEC-grade Size Range: 1/2” - 2 1/2” Product Series: SR Cord Grip with Wire Mesh Strain Relief Grips Materials: Connector - Aluminum Construction Wire Mesh - Galvanized Steel Ideal Uses: On-machine Wiring HVAC Applications Food Processing OEM Equipment Chemical Plants Mines Machine Tool Shops Motor Connections Made in the USA Features: Precision Machined Cut Threads NPT Copper Free Aluminum Neoprene Sealing Grommet Wide-range grips are recommended for use in the wiring of enclosures, power boxes, machine tools, and power centers. They have an anodized aluminum body, galvanized steel mesh with an insulated bushing and industrial grade locknut. UL Listed for use with flexible cords, including Type S, SO, STO, ST, SJ, SJT, SJTO and SVO. NPT Threads Easily Installed on .220" to 2.45" Cable Diameter Range 1/2” to 2 1/2” Hub - See Chart Pg 2 Wide Range Series has a male NPT thread and can be fitting with an Optional industrial-grade steel locknut for thru hole enclosures up to 3/8” thick. Dimensions Shown on Page 2 Compliances: Certified Made in the USA UL 514 B, 467 NEMA Standard FB1 Features: For Use Indoor Applications Only NPT Straight Male Thread Single Weave Variable Galvanized Steel Mesh Provides additional Holding Power In Abrasive Environments One-Piece Design Mesh Integrated into Connector Body CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39123033 Optional: * Insulating Throat Bushing 105° c Rated -see pg 2 chart Steel Locknut AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 19 AMERICAN FITTINGS Corporation ® CG Wide Range Grip with Mesh SR Since 1946 Size Range: 1/2” - 2 1/2” Page 2 Dimensions Product Series: SR Wide Range Cord Grip with Wire Mesh Strain Relief Grips Industrial SPEC-grade C A B D Cat # NPT Threads Trade Size Cable Ranges MIN MAX SR001 1/2" .220 SR002 1/2" .300 SR003 1/2" .400 SR004 3/4" .520 SR005 1" .700 SR006 1-1/4" .940 SRB008 * 1-2" .220 SRB009 * 1-2" .300 SRB010 * 1-2" .400 SRB011 * 3/4" .520 SRB012 * 1" .700 SRB013 * 1-1/4" .940 SRB014 * 1-1/2" 1.200 SRB015 * 2" 1.400 SRB016 * 2-1/2" 1.620 SRB017 * 2-1/2" 2.000 * Includes Insulating Throat Bushing .320 .430 .540 .730 .970 1.200 .320 .430 .540 .730 .970 1.250 1.500 1.750 2.000 2.450 A Length B Diameter C Mesh Length 15/16" 15/16" 15/16" 1" 1-7/32" 1-7/16" 1-9/16" 1-9/16" 1-9/16" 1-9/16" 1-7/8" 2-1/8" 2-1/8" 2-9/32" 2-7/8" 2-7/8" 1-1/32" 1-1/32" 1-1/32" 1-3/8" 1-5/8" 2-1/8" 1-1/32" 1-1/32" 1-1/32" 1-3/8" 1-5/8" 2-1/8" 2-1/4" 2-25/32" 3-1/4" 3-1/4" 4" 5-1/4" 7" 8-1/2" 10" 13" 4" 5-1/4" 6-3/4" 8-1/2" 10" 13" 15-1/4" 17-3/4" 20-1/2" 22" D Length Thread 1/2" 1/2" 1/2" 19/32" 3/4" 3/4" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-3/8" 1-1/2" 1-1/2" Compliances and Other Info Shown on Page 1 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 20 LT 2020 DEMANDING CONDITIONS, DEMAND THE BEST! The Superior Connection for Industrial & Processing Environments OEM Equipment Infrastructure Projects Alternative Energy Data Centers LiquidTIGHT Alloy Steel Electrical Fittings Made in the USA 1/2” to 4” Seal Tight Fittings Steel, Aluminum, Stainless Products Engineered and Manufactured to Meet Your Most Demanding Environments Corporation 21 © 2020 LiquidTIGHT Fittings ® Since 1946 Why Isn’t Your Seal Tight Conduit Wearing the Best? AMFICO’s LiquidTIGHT fittings are the finest choice for flexible conduits including Seal Tight, Anaconda and other flexible conduits. These fittings are suitable for a wide range of installations where integrity of product and protection of equipment are your primary concern. Our LiquidTIGHT fittings are designed to stand up to the most demanding wet and corrosive environments, including power generation, petrochemical, paper mills, food processing, beverage, pharmaceutical plants and anywhere high performance is required. When Failure is Not an Option, There is Only One Liquid Tight Fitting. AMERICAN FITTINGS, LiquidTIGHT, Engineered and Manufactured RIGHT. FOCUS ON THE DETAILS Available With or Without Insulated Throat Bushing 105° Rated EZ-Torque Solid Alloy Steel Precision Machined Compression Nut, Grips Tight & Right Vibration Resistant Chamfered Dome Sheds Liquids Unique Designed Extended Length Steel Ferrule for Positive Grounding, Provides Continual Ground & Prevents Pullout On Tight Bend Conduit, Solid Cup Design Prevents Distortion Since 194 Our Exclusive Engineered Sealing & PosiGRIP Ring, Slips on Quickly & Grips the Jacket of the Cable, Assures a Perfect Moisture Seal, While Preventing Pullout Under Extreme Conditions Solid Alloy Steel Body Precision Machine Cut Threads Sealing Washer (Included) Provides a LiquidTIGHT Seal When Heavy Duty Terminating the Connector in a Industrial Grade Threadless Entry Steel Locknut (Included) UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Fittings made in the USA, they will exceed your Class III, Divisions 1 and 2 expectations but not your budget. Federal Standard A-A-50553 UL Rated for Wet Locations CSA Standard: C22.2 No. 18F FEATURES AND BENEFITS Configurations: Straight, 90°, & 45° all with Grounding Lay In Lug Options, Wire Mesh Strain Reliefs, and Transition Adapters for Rigid Conduit or EMT UL Rated for Wet Locations Guaranteed to Seal Out Liquids, Contaminants and Ingress of Other Fluids Alloy Steel Construction, Outperforms and Outclasses Die Cast and Malleable Iron Reusable Design Full Flat Hex Surfaces on Compression Nut and Body Provides Full Torque Without Damage to Fitting Industrial Grade Steel Locknut Available With or Without Insulated Throat Bushing, 105°C Rated Alloy Steel (with inherent corrosion resistance) is Industrial Grade Zinc Electroplated, Galvanized Plating Option Available Standard Material: Alloy Steel, Aluminum and Stainless Steel Available -consult factory AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 22 AMERICAN FITTINGS Corporation ® Liquid Tight Straight Fitting Since 1946 Industrial SPEC-grade Size Range: 3/8” - 4” Product Series: STR Seal Tight Fitting Reuseable Material: Solid Alloy Steel Construction AL and SS Options Zinc Plated with a Chromate Finish ** Full FLAT HEX Surface with EZ Torque Steel Compression Nuts Torques Tight & Right Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer Extra Long Ferrule Engages Conduit Provides Exceptional Retention & Bend Radius UL Rated Concrete Tight Suitable for Direct Burial Twice the Strength and Durability of ALL Die Cast and Malleable Products B A C D Shown with Optional Bushing Cat # * Trade Size B Hex C Diameter 1-1/16" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-5/16" 2-3/4" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-1/8" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" A Length STR38 3/8" 1-3/8" STR50 1/2" 1-3/16" STR75 3/4" 1-7/16" STR100 1" 1-3/4" STR125 1-1/4" 2-3/16" STR150 1-1/2" 2-3/8" STR200 2" 2-7/8" STR250 2-1/2" 3-7/16" STR300 3" 4" STR350 3-1/2" 4-9/16" STR400 4" 5-1/8" ** Add suffix “B” for insulated throat Compliances: UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations Guaranteed to Seal Out Liquids, Contaminants & Ingress of Other Fluids Suitable for Direct Burial CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com Wt. Per/C 12 13 17 26 46 59 84 147 174 219 256 Available Options: ** Material Options: ALUMINUM - Copper Free Add Suffix “AL” to Cat #; Stainless Steel Consult Factory ** Insulated Throat Bushing 105° UL Rating Factory Installed Bushing - Add Suffix “B” to Above Cat # Configurations: 90° and 45° Transition Fittings - Adapters to Convert EMT to Liquid Tight, Right Conduit to Liquid Tight Options of: Grounding Lugs AL amd CU Wire Mesh Strain Relief ** Galvanized Plating Option Available STR Series is NOT Rated nor Recommended for Type B Conduit See our NMLT Series t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ D Thread Length 5/8" 5/8" 5/8" 11/16" 11/16" 3/4" 3/4" 1-1/8" 1-1/8" 1-1/8" 1-1/8" e: info@amftgs.com Specifications Subject to Change Without Notice 23 AMERICAN FITTINGS Corporation ® Liquid Tight Straight Fitting w/Lug Since 1946 Industrial SPEC-grade Size Range: 3/8” - 4” Product Series: STRGL Seal Tight Fitting Reuseable with AL Ground Lug*** Material: Solid Alloy Steel Construction AL and SS Options Zinc Plated with a Chromate Finish ** Full FLAT HEX Surface with EZ Torque Steel Compression Nuts Torques Tight & Right Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer Extra Long Ferrule Engages Conduit Provides Exceptional Retention & Bend Radius UL Rated Concrete Tight Suitable for Direct Burial A E D Shown with Optional Bushing ** Trade Size A Length C Hex B Diameter STR38GL STR50GL STR75GL STR100GL STR125GL STR150GL STR200GL STR250GL STR300GL STR350GL STR400GL D Thread Length E Lug Height Wire Size Min Max Wt. Per/C ** Add suffix “B” for insulated throat Compliances: UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations Guaranteed to Seal Out Liquids, Contaminants & Ingress of Other Fluids Suitable for Direct Burial CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com Available Options: ** Material Option: ALUMINUM - Copper Free Add Suffix “AL” to Cat #; Stainless Steel Consult Factory ** Insulated Throat Bushing 105° UL Rating Factory Installed Bushing - Add Suffix “B” to Above Cat # Configurations Available and Options: *** Lugs Availabl: AL Standard Option of Copper, Add “CU” to Cat # ** Galvanized Plating Option Available STR Series is NOT Rated nor Recommended for Type B Conduit See our NMLT Series t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 24 AMERICAN FITTINGS Corporation ® Liquid Tight Fitting with Mesh SR Since 1946 Size Range: 3/8” - 2” Product Series: STRGT Seal Tight Fitting with Wire Mesh Strain Relief Grips Material: Solid Alloy Steel Construction Stainless Steel T316 Mesh Industrial SPEC-grade Fitting is Zinc Plated with a Chromate Finish Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer and Insulated Throat Bushing 105° Rating Extra Long Ferrule Engages Conduit Provides Exceptional Retention Twice the Strength and Durability of ALL Die Cast and Malleable Products A C B D Cat # TRADE Size A Length B Diameter STR38GT STR50GT STR75GT STR100GT STR125GT STR150GT STR200GT 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 1-15/16" 2" 2-1/16" 2-3/16" 2-7/16" 2-5/8" 2-13/16" 1-1/8" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" Compliances: Certified Made in the USA UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com C Mesh Length 6" 6" 6-1/2" 7-1/2" 10-1/2" 11-1/2" 13-1/2" D Thread Length 5/8" 5/8" 5/8" 11/16" 11/16" 3/4" 3/4" Wt. Per/C 16 18 24 36 61 83 112 For indoor and outdoor use to connect seal tight conduit to electrical enclosures and equipment. Used for preventing cable pullout damage and for controlling arc-of-bend by absorbing tension from terminals Ideal For Use In: • On-machine Wiring • Hvac Applications • Food Processing • Chemical Plants • Mines • Machine Tool Shops • Motor Connections t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 25 AMERICAN FITTINGS Corporation ® Liquid Tight 90° Fitting Since 1946 Industrial SPEC-grade Size Range: 3/8” - 4” Product Series: STR Seal Tight Fitting Reuseable Material: Steel Construction SS Options Full FLAT HEX Surface with EZ Torque Steel Compression Nuts Torques Tight & Right Zinc Plated with a Chromate Finish ** Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer Extra Long Ferrule Engages Conduit Provides Exceptional Retention & Bend Radius UL Rated Concrete Tight Suitable for Direct Burial D Shown with Optional Bushing A ** Trade Size B Height A Length C Hex D Thread Length Wt. Per/c STR3890 STR5090 STR7590 STR10090 STR12590 STR15090 STR20090 STR25090 STR30090 STR35090 STR40090 ** Add suffix “B” for insulated throat Compliances: UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations Guaranteed to Seal Out Liquids, Contaminants & Ingress of Other Fluids Suitable for Direct Burial CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com Available Options: ** Material Option: For Stainless Steel Consult Factory for Sizes ** Insulated Throat Bushing 105° UL Rating Factory Installed Bushing - Add Suffix “B” to Above Cat # Configurations: Straight and 90° Transition Fittings - Adapters to Convert EMT to Liquid Tight, Right Conduit to Liquid Tight Wire Mesh Strain Relief Options of: Grounding Lugs AL amd CU ** Galvanized Plating Option Available STR Series is NOT Rated nor Recommended for Type B Conduit See our NMLT Series t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 26 AMERICAN FITTINGS Corporation ® Liquid Tight 90° Fitting with/Lug Since 1946 Industrial SPEC-grade Size Range: 3/8” - 4” Product Series: STRGL Seal Tight Fitting Reuseable with AL Ground Lug*** Material: Steel Construction SS Options Zinc Plated with a Chromate Finish ** Full FLAT HEX Surface with EZ Torque Steel Compression Nuts Torques Tight & Right Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer Extra Long Ferrule Engages Conduit Provides Exceptional Retention & Bend Radius UL Rated Concrete Tight Suitable for Direct Burial E D A Trade Size Shown with Optional Bushing A Length C Hex B Height D Thread Length E Lug Height Wire Size MAX MIN Wt. Per/C STR3890GL STR5090GL STR7590GL STR10090GL STR12590GL STR15090GL STR20090GL STR25090GL STR30090GL STR35090GL STR40090GL ** Add suffix “B” for insulated throat Compliances: UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations Guaranteed to Seal Out Liquids, Contaminants & Ingress of Other Fluids Suitable for Direct Burial CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com Available Options: Material Option For Stainless Steel Consult Factory for Sizes ** Insulated Throat Bushing 105° UL Rating Factory Installed Bushing - Add Suffix “B” to Above Cat # Configurations Available and Options *** Lugs Available: AL Standard Option of Copper Add “CU” to Cat # Straights and 45° Transition Fittings - Adapters to Convert EMT to Liquid Tight, Right Conduit to Liquid Tight Options of Wire Mesh Strain Relief ** Plating Option: Galvanized STR Series is NOT Rated nor Recommended for Type B Conduit See our NMLT Series t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 27 AMERICAN FITTINGS Corporation ® Liquid Tight 90° Fitting with Mesh SR Since 1946 Industrial SPEC-grade Size Range: 3/8” - 2” Product Series: STRGT Seal Tight Fitting with Wire Mesh Strain Relief Grips Material: Solid Alloy Steel Construction Stainless Steel T316 Mesh Fitting is Zinc Plated with a Chromate Finish Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer and Insulated Throat Bushing 105° Rating Extra Long Ferrule Engages Conduit Provides Exceptional Retention l Twice the Strength and Durability of ALL Die Cast and Malleable Products A D B C E Cat # Trade Size A Length B Height C Diameter STR3890GT STR5090GT STR7590GT STR10090GT STR12590GT STR15090GT STR20090GT 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-11/16" 2-3/4" 3-1/16" 3-1/2" 3-13/16" 4-1/2" 4-15/16" 1-7/8" 1-7/8" 2-1/4" 2-3/4" 3-1/16" 3-1/4" 3-13/16" 1-1/8" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" Compliances: Certified Made in the USA UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com D Mesh Length 6" 6" 6-1/2" 7-1/2" 10-1/2" 11-1/2" 13-1/2" E Thread Length 5/8" 5/8" 5/8" 11/16" 11/16" 3/4" 3/4" Wt. Per/C 26 28 41 72 98 137 206 For indoor and outdoor use to connect seal tight conduit to electrical enclosures and equipment. Used for preventing cable pullout damage and for controlling arc-of-bend by absorbing tension from terminals Ideal For Use In: • On-machine Wiring • Hvac Applications • Food Processing • Chemical Plants • Mines • Machine Tool Shops • Motor Connections t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 28 AMERICAN FITTINGS Corporation ® Liquid Tight 45° Fitting Since 1946 Industrial SPEC-grade Size Range: 3/8” - 4” Product Series: STR Seal Tight Fitting Reuseable Material: Steel Construction Full FLAT HEX Surface with EZ Torque Steel Compression Nuts Torques Tight & Right Zinc Plated with a Chromate Finish ** Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer Extra Long Ferrule Engages Conduit Provides Exceptional Retention & Bend Radius UL Rated Concrete Tight Suitable for Direct Burial D Shown with Optional Bushing A ** Trade Size A Length B Height STR3845 STR5045 STR7545 STR10045 STR12545 STR15045 STR20045 STR25045 STR30045 STR35045 STR40045 ** Add suffix “B” for insulated throat Compliances: UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations Guaranteed to Seal Out Liquids, Contaminants & Ingress of Other Fluids Suitable for Direct Burial CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com D Thread Length Wt. Per/c Available Options: ** Material Option: For Stainless Steel Consult Factory for Sizes ** Insulated Throat Bushing 105° UL Rating Factory Installed Bushing - Add Suffix “B” to Above Cat # Configurations: Straight and 90° Transition Fittings - Adapters to Convert EMT to Liquid Tight, Right Conduit to Liquid Tight Wire Mesh Strain Relief Options of: Grounding Lugs AL amd CU ** Galvanized Plating Option Available STR Series is NOT Rated nor Recommended for Type B Conduit See our NMLT Series t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ C Hex e: info@amftgs.com Specifications Subject to Change Without Notice 29 AMERICAN FITTINGS Corporation ® Liquid Tight 45° Fitting with/Lug Since 1946 Industrial SPEC-grade Size Range: 3/8” - 4” Product Series: STRGL Seal Tight Fitting Reuseable with AL Ground Lug*** Material: Steel Construction Zinc Plated with a Chromate Finish ** Full FLAT HEX Surface with EZ Torque Steel Compression Nuts Torques Tight & Right Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer Extra Long Ferrule Engages Conduit Provides Exceptional Retention & Bend Radius UL Rated Concrete Tight Suitable for Direct Burial E D Shown with Optional Bushing ** A Trade Size A Length C Hex B Height STR3845GL STR5045GL STR7545GL STR10045GL STR12545GL STR15045GL STR20045GL STR25045GL STR30045GL STR35045GL STR40045GL D Thread Length E Lug Height Wire Size Min Max Wt. Per/C ** Add suffix “B” for insulated throat Compliances: UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations Guaranteed to Seal Out Liquids, Contaminants & Ingress of Other Fluids Suitable for Direct Burial CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com Available Options: ** Insulated Throat Bushing 105° UL Rating Factory Installed Bushing - Add Suffix “B” to Above Cat # Configurations Available and Options *** Lugs Available: AL Standard Option of Copper Add “CU” to Cat # Straights and 90° Transition Fittings - Adapters to Convert EMT to Liquid Tight, Right Conduit to Liquid Tight Options of Wire Mesh Strain Relief ** Plating Option: Galvanized STR Series is NOT Rated nor Recommended for Type B Conduit See our NMLT Series t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 30 AMERICAN FITTINGS Corporation ® Liquid Tight Straight Fitting Since 1946 Industrial SPEC-grade Size Range: 3/8” - 4” Product Series: STR Seal Tight Fitting Reuseable Material: Solid Alloy Steel Construction Stainless Steel T316 Mesh Fitting is Zinc Plated with a Chromate Finish Made in the USA Features: Precision Machined Cut Threads NPT Furnished with Steel Locknut and Sealing Washer and Insulated Throat Bushing 105° Rating Extra Long Ferrule Engages Conduit Provides Exceptional Retention & Bend Radius UL Rated Concrete Tight Suitable for Direct Burial Twice the Strength and Durability of ALL Die Cast and Malleable Products A D B C E Cat # Trade Size A Length B Height C Diameter STR3845GT STR5045GT STR7545GT STR10045GT STR12545GT STR15045GT STR20045GT 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/4" 2-1/4" 2-1/2" 2-13/16" 3-1/8" 3-11/16" 4-1/8" 1-9/16" 1-11/16" 2" 2-1/4' 2-3/4" 2-15/16" 3-3/8" 1-1/8" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" D Mesh Length 6" 6" 6-1/2" 7-1/2" 10-1/2" 11-1/2" 13-1/2" E Thread Length 5/8" 5/8" 5/8" 11/16" 11/16" 3/4" 3/4" Wt. Per/C 23 25 36 59 78 118 117 Compliances: Certified Made in the USA UL 514 B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2 Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39123033 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 31 AMERICAN FITTINGS Corporation ® Liquid Tight Fitting Non-Metallic Since 1946 Industrial SPEC-grade Size Range: 3/8” - 2” Product Series: NMLT Seal Tight Straight Connectors Material: UV Rated PVC Use With: Type “B” Seal Tight Applications: SPEC-grade NMLT Fittings are the ideal choice for environments and applications where product integrity is your prime concern. Applications including; packaging facilities, wastewater treatment equipment, HVAC, pumps. No disassembly of the fitting is required; push the Type B conduit onto the ferrule then tighten the domed sealing nut. A positive liquid-tight seal is provided by our pressure sensitive internal gland when the nut is tightened. A liquid-tight seal is also assured between the fitting and box by a sealing ring A NPT Threads Furnished with Locknut & Sealing Washer B C Cat # Trade Size A Length B Diameter NML38 NML50 NML75 NML100 NML125 NML150 NML200 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 1-15/16" 1-15/16" 1-15/16" 2-1/16" 2-5/16" 2-1/2" 2-13/16" 1-1/2" 1-1/2" 1-3/4" 2-1/16" 2-7/16" 2-11/16" 3-3/8" C Thread Length 5/8" 5/8" 5/8" 3/4" 3/4" 13/16" 7/8" Wt. Per/C 7 6 8 13 19 24 39 Compliances: Features: UL Standards 514B, 467 UL Listed liquidtight flexible non-metallic conduit fittings are suitable for use in the following hazardous locations under NEC: Class I, Division 2; Class II, Divisions 1 & 2; and Class III, Divisions 1 & 2; Fully smooth interior and tough exterior design are ideal for indoor or outdoor locations where continuous or intermittent moisture is present and positive bonding to the conduit, box, or enclosure is required. Together, the NMLT fitting body and steel locknut protect conductors from damage due to excessive vibrations and contaminants, such as moisture, oils, and dust. Under NEC Suitable for grounding in sizes 3/8” through 1-1/4” Furnished with “O” Ring and Steel Zinc Plated Locknut Standard NPT Threads Suitable for indoor/outdoor use cUL Standard C22.2 No. 18F For use with Type B LT conduit Fitting is rated IP66 NMLT Series is NOT Rated nor Recommended for Type A Conduit See our STR Series UNSPSC 39121420 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 32 AMERICAN FITTINGS Corporation ® Liquid Tight 90° Fitting Non-Metallic Since 1946 Industrial SPEC-grade Size Range: 3/8” - 2” Product Series: NMLT Seal Tight 90° Connectors Material: UV Rated PVC Use With: Type “B” Seal Tight Applications: SPEC-grade NMLT Fittings are the ideal choice for environments and applications where product integrity is your prime concern. Applications including; packaging facilities, wastewater treatment equipment, HVAC, pumps No disassembly of the fitting is required; push the Type B conduit onto the ferrule then tighten the domed sealing nut. A positive liquid-tight seal is provided by our pressure sensitive internal gland when the nut is tightened. A liquid-tight seal is also assured between the fitting and box by a sealing ring NPT Threads Furnished with Locknut & Sealing Washer A C B D Cat # TRADE Size A Length B Height C Diameter NML3890 NML5090 NML7590 NML10090 NML12590 NML15090 NML20090 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3-1/16" 3-1/16" 3-7/16" 3-7/8" 4-5/8" 4-7/8" 5-1/8" 2-1/16" 2-1/16" 2-3/8" 2-7/8" 4-1/4" 4-1/2" 5-1/8" 1-1/2" 1-1/2" 1-3/4" 2-1/16" 2-7/16" 2-11/16" 3-3/8" D Thread Length 5/8" 5/8" 5/8" 3/4" 3/4" 13/16" 7/8" Wt. Per/C 8 7 10 16 32 41 62 Available Options: Compliances: UL Standards 514B, 467 UL Listed liquidtight flexible non-metallic conduit fittings are suitable for use in the following hazardous locations under NEC: Class I, Division 2; Class II, Divisions 1 & 2; and Class III, Divisions 1 & 2; Fully smooth interior and tough exterior design are ideal for indoor or outdoor locations where continuous or intermittent moisture is present and positive bonding to the conduit, box, or enclosure is required. Together, the NMLT fitting body and steel locknut protect conductors from damage due to excessive vibrations and contaminants, such as moisture, oils, and dust. Under NEC Suitable for grounding in sizes 3/8” through 1-1/4” Furnished with “O” Ring and Steel Zinc Plated Locknut 90°Angled Connectors Provide a Smooth “Sweep” Radius Standard NPT Threads Suitable for indoor/outdoor use cUL Standard C22.2 No. 18F For use with Type B LT conduit Fitting is rated IP66 NMLT Series is NOT Rated nor Recommended for Type A Conduit See our STR Series UNSPSC 39121420 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 33 AMERICAN FITTINGS Corporation ® Adapter Steel EMT to LT Conduit Since 1946 Industrial SPEC-grade Size Range: 1/2” -4” Product Series: STREMT - EMT Compression to Liquid Tight Conduit Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Made in the USA TWICE the Strength and Durability of Die Cast & Malleable Iron Products Split Coupling EMT Compression to Liquid Tight Conduit C1 HEX A Converts Flexible LT conduit to EMT Conduit Outdoor and Indoor Use with flexible metallic LT conduit or type B flexible non-metallic LT conduit. B2 C2 HEX B1 EMT Compression Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts Long Ferrule on LT End Provides Continual Ground and Stability Against Pull Out Liquid Tight Rain Tight Option - RT Cat #’s Cat # STREMT 50 STREMT 75 STREMT100 STREMT125 STREMT150 STREMT200 STREMT250 STREMT300 STREMT350 STREMT400 STREMT 50RT STREMT 75RT STREMT100RT STREMT125RT STREMT150RT STREMT200RT STREMT250RT STREMT300RT STREMT350RT STREMT400RT Trade Size A Length B1 Diameter B2 Diameter C1 Hex C2 Hex 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-9/16" 1-11/16" 1-13/16" 2-3/4" 3-3/16" 3-3/8" 4-11/16" 4-7/8" 6-1/8" 6-3/8" 1-9/16" 1-11/16" 1-13/16" 2-3/4" 3-3/16" 3-3/8" 4-11/16" 4-7/8" 6-1/8" 6-3/8" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" 1" 1-1/4" 1-1/2" 1-7/8" 2-3/16" 2-7/8" 3-3/8" 4" 4-9/16" 5-1/8" 1" 1-1/4" 1-1/2" 1-7/8" 2-3/16" 2-7/8" 3-3/8" 4" 4-9/16" 5-1/8" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-5/16" 2-3/4" 3-5/16" 3-15/16" 4-7/16" 5" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-5/16" 2-3/4" 3-5/16" 3-15/16" 4-7/16" 5" 15/16" 1-3/16" 1-7/16" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 15/16" 1-3/16" 1-7/16" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" Compliances: Certified Made in the USA UL 514B, 467 Compression Fittings Concrete Tight Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39131707 AMFTGS.com :Available OPTIONS: ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number *** Rain Tight RT Series Recommended for Direct Burial Requirements Also Offered As: LT to Rigid Conduit - Compression LT to Rigid Conduit - Threaded LT to FMC - FLX 34 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Steel Rigid Conduit to LT Since 1946 Size Range: 1/2” - 4” Product Series: STRFR - Rigid Threaded to Liquid Tight Conduit Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Industrial SPEC-grade Converts Flexible LT conduit to Rigid Steel Conduit Outdoor and Indoor Use with flexible metallic LT conduit or Type A flexible non-metallic LT conduit. Made in the USA Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts STRFR Series is Rain Tight Long Ferrule on LT End Provides Continual Ground and Stability Against Pull Out Split Conduit Coupling Rigid Theaded to Liquid Tight TWICE the Strength and Durability of Die Cast & Malleable Iron Products B A D E Rigid Threaded C Cat # STR38FR STR50FR STR75FR STR100FR STR125FR STR150FR STR200FR STR250FR STR300FR STR350FR STR400FR Compliances: Certified Made in the USA UL 514B, 467 Concrete Tight and Rain Tight Suitable for Direct Burial NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 Trade Size A Length 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-1/4" 1-1/4" 1-3/8" 1-1/2" 1-13/16" 2" 2-1/16" 2-7/8" 2-7/8" 2-7/8" 2-7/8" Liquid Tight D Diameter E Diameter Wt. Per/C 1-1/16" 1-1/8" 1-1/8" 1-1/8" 1-3/16" 1-3/16" 1-3/8" 1-7/16" 1-7/16" 1-11/16" 1-3/4" 1-3/4" 2-1/16" 2-3/16" 2-3/16" 2-5/16" 2-3/8" 2-3/8" 2-3/4" 2-7/8" 2-3/4" 3-1/4" 3-7/16" 3-7/16" 3-15/16" 4" 4" 4-7/16" 4-9/16" 4-9/16" 4-15/16" 5-1/8" 5-1/8" :Available OPTIONS: 1" 1-1/8" 1-3/8" 1-5/8" 2-1/16" 2-5/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" 11 13 18 31 51 64 83 153 175 222 247 B Hex C Hex ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Also Offered As: LT to EMT - Compression LT to FMC - FLX E101868 PG | 35 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Steel Rigid Conduit to LT Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: STRNT- Compression to Liquid Tight Conduit Rain Tight Option * Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Converts Flexible LT conduit to Rigid Steel Conduit Outdoor and Indoor Use with flexible metallic LT conduit or Type A flexible non-metallic LT conduit. Made in the USA Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts Long Ferrule on LT End Provides Continual Ground and Stability Against Pull Out Split Conduit Coupling Rigid Compression to Liquid Tight TWICE the Strength and Durability of Die Cast & Malleable Iron Products A C Hex Shown RT Version with Gold Toned Nuts -Suffix RT Bø Rigid Compression LT STRNT50 Trade Size 1/2" 1-11/16” 1-3/16” 1-1/8” Wt. Per/C 16 STRNT75 3/4" 2-1/4” 1-7/16" 1-3/8” 34 STRNT100 1" 2-9/16” 1-3/4” 1-11/16” 59 STRNT125 1-1/4" 3-3/16” 2-3/16” 2-1/16” 93 STRNT150 1-1/2" 3-9/16” 2-3/8” 2-5/16” 117 STRNT200 2" 3-5/8” 2-7/8” 2-3/4” 153 STRNT250 2-1/2" 5-3/16” 3-7/16" 3-1/4” 274 STRNT300 3" 5-5/16” 4” 3-15/16” 402 STRNT350 3-1/2" 5-5/16” 4-9/16” 4-7/16” 448 4" 5-3/8” 5-1/8” Cat # * STRNT400 A Bø C Hex 4-15/16” Available OPTIONS: Compliances: Certified Made in the USA UL 514B, 467 Concrete Tight and Rain Tight Suitable for Direct Burial NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 568 * Rain Tight (as shown) Option Add Suffix RT to Above Cat. Number ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Also Offered As: LT to Rigid - Threaded LT to EMT - Compression LT to FMC - FLX E101868 PG | AMFTGS.com 36 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice NOTES MY PRODUCT NOTES American Fittings Contact: Email: Telephone: website: amftgs.com tel: 800.221.5268 37 Electrical Fittings Made in the USA Rigid 2020 Rigid When It Comes To Your Electrical Fittings, Specification Grade TrustAlloy One Name, AMERICAN. Steel 1/2”- 4” Connectors & Couplings Set Screw & Compression RainTIGHT Fittings Hubs Reducing Bushings Ground Bushings Adapters to Convert Rigid TO LT, EMT or FMC Supports, Straps, Hangers Products Engineered and Manufactured to Meet Your Most Demanding Environments Reduce Labor Costs Improve Your Application 38 AMERICAN FITTINGS Corporation ® 2020 Rigid Fittings Catalog Since 1946 RETHINK AMERICAN Thought of as only a fittings source for Buy America projects, you should realize our full range of industrial fittings go WELL BEYOND government work. Infrastructure to food processing, being much easier to install and always surpassing application requirements, our fittings will outperform ALL others, as will our commitment to customer service. AMERICAN INTEGRITY OF MATERIALS AMERICAN FITTINGS’ products are manufactured from US manufactured hot rolled alloy steel bar stock. All materials are received from the mill with certified ASTM mill test reports . This ensures the integrity of raw material on All Raw Materials every fitting we manufacture. Fully Documented Alloy Steel Bar Stock AMERICAN CONSISTENCY OF PRODUCT If your conduit is rigid steel, why are you using inferior die cast or malleable iron fittings? Neither of these materials offers the uniformity of threads and compression, that our alloy steel provides. Our consistent centerlines provide precise alignment with enclosures and conduit. Environmental integrity and ease of installation are guaranteed with the manufacturing and machining tolerances provided. No fitting found worldwide can meet the quality of AMFICO. Precision Cutting & Machining of Every Part AMERICAN INNOVATION IN PRODUCT DESIGNS & ENGINEERING Reengineered Myers Hubs The BEST Erickson Made AMFICO Ground HUBS WaterTIGHT is a Guarantee We Provide 3 PIECE RIGID STEEL THREADED COUPLINGS Uniformity & Consistency of Centerlines Provides Dead Center Alignment on Enclosures & Conduit Space Saving Design in Steel & Aluminum Since 194 Installs Faster Than Any Other Product Rigid Conduit Fittings From Our Rigid Catalog REDUCING BUSHINGS Hazardous & Ordinary Locations Steel & Aluminum CONDUIT BUSHINGS Threaded - Non Threaded Steel & Aluminum Torque Tight and Right Numerous Grounding Options Ends Cross Threading Galvanized Plating Option For All Our Product Catalogs AMERICAN STRENGTH IS UNEQUALED See Inside Back Cover There is no way to get around the numbers, twice the strength of MI at a fraction of the weight. Alloy steel will outperform and outlast both die cast and malleable iron products. Alloy steel is not dependent on carbon for strength, and is naturally stronger with greater benefits in harsh conditions. Additive elements found in alloy steel make it NATURALLY corrosion resistant. Machined Alloy Steel [Ours] ASTM Physical Test Result Cast Malleable Iron [Theirs] ASTM Physical Test Result Zinc Die Cast (Zamack # 3 -7)[Theirs] ASTM Physical Test Result Tensile Strength (kpsi) 88 Tensile Strength (kpsi) 42 Tensile Strength (kpsi) 37 Yield Strength (kpsi) 70 Yield Strength (kpsi) 33 15 Elongation (% in 2”) 10 Yield Strength (kpsi) Elongation (% in 2”) 31 Elongation (% in 2”) Brinell Hardness 168 Brinell Hardness 102 ‐ 116 Brinell Hardness 13 80 39 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® 2020 Rigid Fittings Catalog Since 1946 More Product Features and Benefits Than Any Fitting on the Market Guaranteed to Exceed Your Expectations Not Your Budget RainTIGHT Fittings Feature AMFICO Proprietary Internal Environmental Sealing Ring Rigid COMPRESSION Couplings & Connectors No Lazy Connections with Our EZ Torque Alloy Steel Flat Hex Compression Nuts Corrosion Resistant Alloy Steel is Industrial Grade Zinc Plating with Chromate Finish PRECISION MACHINED CUT THREADS Hardened Alloy Steel Threads Provide Full Torque Values Never “Cross-Thread” Another Fitting Secures Conduit with Less Labor Speed Up Your Wire Pulls with Our Super Smooth ID’s for EZ & FAST Wire Pulls GUARANTEED DIMENSIONAL CONSISTENCY Precision Machined Alloy Steel Fittings Guaranteed Defect Free and Consistent From One Fitting to the Next Fittings are Exact-to-Size So Every Fitting Fits Perfectly Every Time Uniformed Surface Attaches Squarely to Boxes Hold Long Pipe Runs Straight and True 1/3 the Size & Weight of MI Fittings Buy With Confidence: RT Series UL Listed RainTIGHT Rigid Connectors & Couplings Rigid SET SCREW Couplings & Connectors Set Screw Fittings Feature Steel Screws Deep Slots with HEX Heads Minimize Driver Slippage Get the Torque You Need Without EVER Cracking a Screw or a Fitting Adapters EMT to Threaded Rigid Conduit Seal Tight to Rigid FMC to Rigid Couplings UL Listed and USA Stamped on Every Product RT Series Connectors Furnished With Industrial Grade Sealing Ring and Steel Locknut (shown with optional insulated bushing) Wall Penetration Sleeve & Conduit Brace Secure Conduit Through a Ceiling, Roof, Floor Compression Connector with Flange Secures and Positions for Fire Stop Protection This Catalog Features Our Steel Rigid Fittings Connectors Bushings Adapters Conduit Sleeves Straps/Hangers Other Full Line Catalogs Available Can be Found on the Last Page and Online at AMFTGS.com 40 AMERICAN FITTINGS Corporation ® Rigid Steel Comp. NT Connector Since 1946 Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: NT Rigid / IMC Compression Connector Material: Solid Alloy Steel Construction Industrial SPEC-grade Zinc Plated with a Chromate Finish ** Made in the USA Features: Full FLAT HEX Surface for EZ Torque Steel Compression Nut Torques Tight & Right Precision Machined Cut Threads AMFICO EZ Torque Solid Steel Compression Nut Zinc Plated with a Chromate Finish ** UL Rated Concrete Tight Suitable for Direct Burial *** Twice the Strength and Durability with a Fraction of the Weight and Size of Malleable Iron B Compression Connector Below Shown with Optional Insulated Bushing A C D Furnished with a UL Listed Steel Locknut Cat # TRADE SIZE A LENGTH B HEX C DIAMETER NT2750 1/2" 1-1/2" 1-1/8" 1-3/16" D THREAD LENGTH 1/2" NT2751 3/4" 1-5/8" 1-3/8" 1-7/16" 1/2" Wt. Per/C 13 20 NT2752 1" 1-15/16" 1-11/16" 1-3/4" 11/16" 36 NT2753 1-1/4" 2-1/8" 2-1/16" 2-3/16" 11/16" 48 NT2754 1-1/2" 2-3/8" 2-5/16" 2-3/8" 3/4" 70 NT2755 2" 2-1/2" 2-13/16" 2-7/8" 3/4" 100 ERC250CONN (1) 2-1/2" 3-7/16" 3-1/4" 3-7/16" 1" 120 ERC300CONN (1) 3" 1" 165 ERC350CONN (1) 3-1/2" 4-9/16" 4-7/16" 4-9/16" 1" 201 ERC400CONN (1) 4" 5-1/8" 4-15/16" 5-1/8" 1" 237 4" 3-15/16" 4" (1) 2 1/2” to 4” UL Listed and Rated for both EMT & Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Compression Fittings Concrete Tight Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 PG | AMFTGS.com Available OPTIONS: Factory Installed 105° UL Rating Insulated BushingFor this Option, Add Suffix B to Above Cat Number RainTight Configuration -”RT series” See Catalog Page ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Color Coded Painted (powder coated) Fittings- See Catalog Page *** Rain Tight Series Recommended for Direct Burial Requirements 41 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Rigid RT Steel Comp. NT Connector Since 1946 Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: NT Rain Tight Rigid / IMC Compression Connector Industrial SPEC-grade Zinc Plated with a Chromate Finish ** Material: Solid Alloy Steel Construction Compression Nut Plated Gold Tone for EZ Inspection and Identification Made in the USA Features: Guaranteed Rain Tight Precision Machined Cut Threads AMFICO EZ Torque Solid Steel Compression Nut Full FLAT HEX Surface for Zinc Plated with a Chromate Finish ** EZ Torque Compression Nut UL Rated Concrete Tight UL Listed Rain Tight Suitable for Direct Burial Torque Tight & Right Suitable for Use with UL Listed Rigid AL Conduit Twice the Strength and Durability with a Fraction of the Weight and Size of Malleable Iron B A RT Compression Connector C Furnished with UL Listed Steel Locknut and Rain Tight Sealing Ring D TRADE SIZE A LENGTH B HEX C DIAMETER NT2750RT 1/2" 1-1/2" 1-1/8" 1-3/16" D THREAD LENGTH 1/2" NT2751RT 3/4" 1-5/8" 1-3/8" 1-7/16" 1/2" 20 NT2752RT 1" 1-15/16" 1-11/16" 1-3/4" 11/16" 36 NT2753RT 1-1/4" 2-1/8" 2-1/16" 2-3/16" 11/16" 48 Cat # Wt. Per/C 13 NT2754RT 1-1/2" 2-3/8" 2-5/16" 2-3/8" 3/4" 70 NT2755RT 2" 2-1/2" 2-13/16" 2-7/8" 3/4" 100 ERC250CONNRT (1) 2-1/2" 3-7/16" 3-1/4" 3-7/16" 1" 120 ERC300CONNRT (1) 3" 1" 165 ERC350CONNRT (1) 3-1/2" 4-9/16" 4-7/16" 4-9/16" 1" 201 ERC400CONNRT (1) 4" 5-1/8" 4-15/16" 5-1/8" 1" 237 4" 3-15/16" 4" (1) 2 1/2” to 4” UL Listed and Rated for both EMT & Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 UL Listed Rain Tight Compression Fittings Concrete Tight Suitable for Direct Burial Suitable for Use with UL Listed Rigid AL Conduit NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 PG | AMFTGS.com Available OPTIONS: Factory Installed 105° UL Rating Insulated BushingFor this Option, Add Suffix B to Above Cat Number ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Color Coded Painted (powder coated) Fittings- See Catalog Page Rain Tight Series Recommended for Direct Burial Requirements t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 42 AMERICAN FITTINGS Corporation ® Rigid Steel Comp. NT Coupling Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: NT Rigid / IMC Compression Coupling Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish ** Made in the USA Features: Precision Machined Cut Threads AMFICO EZ Torque Solid Steel Compression Nuts Easily Torques Tight and Right UL Rated Concrete Tight Suitable for Direct Burial *** Suitable for Use with UL Listed Rigid AL Conduit Twice the Strength and Durability with a Fraction of the Weight and Size of Malleable Iron A Compression Coupling C B Full FLAT HEX Surface for EZ Torque Steel Compression Nuts Torques Tight & Right Cat # NT2760 NT2761 NT2762 NT2763 NT2764 NT2765 ERC250CPLG (1) ERC300CPLG (1) ERC350CPLG (1) ERC400CPLG (1) TRADE SIZE A LENGTH B HEX C DIAMETER Wt. Per/C 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-13/16" 2-1/8" 2-7/16" 2-13/16" 3-1/8" 3-1/4" 3-13/16" 3-15/16" 3-15/16" 4" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-15/16" 2-13/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/16" 3-7/16" 4" 4-9/16" 5-1/8" 16 24 48 64 110 140 150 192 229 266 (1) 2 1/2” to 4” UL Listed and Rated for both EMT & Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Suitable for Use with UL Listed Rigid AL Conduit Concrete Tight and Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 PG | AMFTGS.com Available OPTIONS: RainTight Configuration - ”RT series” See Catalog Page ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Color Coded Painted (powder coated) Fittings - See Catalog Page *** Rain Tight Series Recommended for Direct Burial Requirements t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 43 AMERICAN FITTINGS Corporation ® Rigid RT Steel Comp. NT Coupling Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: NT Rain Tight Rigid / IMC Compression Coupling Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish ** Made in the USA Compression Nuts Plated Gold Tone for EZ Inspection and Identification Features: Guaranteed Rain Tight Precision Machined Cut Threads AMFICO EZ Torque Solid Steel Compression Nuts Easily Torques Tight and Right UL Rated Concrete Tight UL Listed Rain Tight Suitable for Direct Burial Suitable for Use with UL Listed Rigid AL Conduit Twice the Strength and Durability with a Fraction of the Weight and Size of Malleable Iron A RT Compression Coupling C B Full FLAT HEX Surface for EZ Torque Steel Compression Nuts Torques Tight & Right Cat # TRADE SIZE A LENGTH B HEX C DIAMETER Wt. Per/C NT2760RT NT2761RT NT2762RT NT2763RT NT2764RT NT2765RT ERC250CPLGRT (1) ERC300CPLGRT (1) ERC350CPLGRT (1) ERC400CPLGRT (1) 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-13/16" 2-1/8" 2-7/16" 2-13/16" 3-1/8" 3-1/4" 3-13/16" 3-15/16" 3-15/16" 4" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-15/16" 2-13/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/16" 3-7/16" 4" 4-9/16" 5-1/8" 16 24 48 64 110 140 150 192 229 266 (1) 2 1/2” to 4” UL Listed and Rated for both EMT & Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 UL Listed Rain Tight Compression Fittings Concrete Tight Suitable for Direct Burial Suitable for Use with UL Listed Rigid AL Conduit NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 PG | AMFTGS.com Available OPTIONS: ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Color Coded Painted (powder coated) Fittings - See Catalog Page Rain Tight Series Recommended for Direct Burial Requirements t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 44 AMERICAN FITTINGS Corporation ® Rigid Set Screw Steel Connector Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: SNT - Rigid / IMC Set Screw Connector Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish Made in the USA Features: Twice the Strength and Durability of All Die Cast and Malleable Iron Fittings Precision Machined Body and Scew Holes Fully Avoids Cracking or Distortion from Tightening Set Screws AMFICO EZ Torque Tri-Head Steel Screws Will Not Crack, Vibration Resistant May be Installed Using Slotted, Phillips or Robertson Driver 2 1/2” - 4” Feature Two Hex Screws per Connection UL Rated Concrete Tight When Taped Set Screw Connector Shown Below with Insulated Bushing* B D 1/2” to 2” - 1 Steel SSPer End 2 1/2” to 4” - 2 Steel SS Per End Drives Fast & True D B C C Furnished with a UL Listed Steel Locknut 1/2” thru 2” Has One Set Screw 2 1/2” thru 4” has Two Set Screws Recommended Torque 160-200 in-lb A A TRADE SIZE Cat # A LENGTH B HEX C DIAMETER D DIAMETER Wt. Per/C SNT1750 1/2" 1-1/4" 15/16" 1" 9/16" 10 SNT1751 3/4" 1-1/4" 1-3/16" 1-1/4" 13/16" 13 SNT1752 1" 1-9/16" 1-7/16" 1-1/2" 1-1/16" 21 SNT1753 1-1/4" 1-3/4" 1-13/16" 1-7/8" 1-3/8" 33 SNT1754 1-1/2" 2" 2-1/16" 2-3/16" 1-9/16" 46 SNT1755 2" 2" 2-9/16" 2-11/16" 2" 62 ERS250CONN (1) 2-1/2" 2-1/2" 3-1/4" 3-7/16" 2-7/16" 117 ERS300CONN (1) 3" 2-9/16" 3-15/16" 4" 3" 167 ERS350CONN (1) 3-1/2" 2-9/16" 4-7/16" 4-9/16" 3-1/2" 206 ERS400CONN (1) 4" 2-9/16" 4-15/16" 5-1/8" 3-15/16" 247 (1) 2 1/2” to 4” are UL Listed & Approved for use on BOTH EMT & Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Set Screw Fittings Concrete Tight When Taped NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121434 Available OPTIONS: * Factory Installed 105° UL Rating Insulated BushingFor this Option, Add Suffix B to Above Cat Number Compression Configuration including Rain Tight Color Coded Painted (powder coated) Fittings- See Catalog Page E101868 PG | 45 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Rigid Set Screw Steel Coupling Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4“ 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: SNT - Rigid / IMC Set Screw Coupling Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish Made in the USA Features: Twice the Strength and Durability of All Die Cast and Malleable Iron Fittings Precision Machined Body and Scew Holes Fully Avoids Cracking or Distortion from Tightening Set Screws AMFICO EZ Torque Tri-Head Steel Screws Will Not Crack, Vibration Resistant May be Installed Using Slotted, Phillips or Robertson Driver 2 1/2” - 4” Feature Two Hex Screws per Connection UL Rated Concrete Tight When Taped B B Set Screw Coupling C D C 1/2” to 2” - 1 Steel SSPer End 2 1/2” to 4” - 2 Steel SS Per End Drives Fast & True 1/2” thru 2” have one set screw per end 2 1/2” thru 4” have two set screws per end Recommended Torque 160-200 in-lb A TRADE SIZE Cat # A A LENGTH B HEX C DIAMETER D DIAMETER Wt. Per/C SNT1760 1/2" 1-1/2" 7/8" 7/8" 11/16" 8 SNT1761 3/4" 1-1/2" 1-1/16" 1-1/8" 7/8" 10 SNT1762 1" 1-7/8" 1-3/8" 1-3/8" 1-1/8" 20 SNT1763 1-1/4" 2-3/16" 1-11/16" 1-3/4" 1-1/2" 29 SNT1764 1-1/2" 2-5/8" 1-15/16" 2-1/16" 1-11/16" 42 SNT1765 2" 2-11/16" 2-7/16" 2-1/2" 2-1/8" 54 ERS250CPLG (1) 2-1/2" 2-9/16" 3-1/4" 3-7/16" 2-13/16" 108 ERS300CPLG (1) 3" 2-5/8" 3-15/16" 4" 3-7/16" 129 ERS350CPLG (1) 3-1/2" 2-5/8" 4/7/16" 4-9/16" 3-15/16" 154 ERS400CPLG (1) 4" 2-5/8" 4-15/16" 5-1/8" 4-7/16" 172 (1) 2 1/2” to 4” are UL Listed & Approved for use on BOTH EMT & Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Set Screw Fittings Concrete Tight When Taped NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121434 Available OPTIONS: Compression Configuration including Rain Tight Color Coded Painted (powder coated) Fittings - See Catalog Page E101868 PG | 46 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Ground Bushings Steel Thr’d w/Lug Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: GB Grounding Bushings Threaded Furnished with Factory Installed AL Lay In Grounding Lug* Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish** For Use On Threaded Rigid/imc Conduit to Provide a Means of Grounding Threaded Conduit Through an Insulated Bushing. Made in the USA Solid Steel Construction with Factory Installed Insulator Precison Cut Machined Threads Flat Hex Surface for Full Torque Values Insulator Throat Bushing Prevents Damage to Wire 3 Thr’d Machined Holes to Accoodate Lug Orientation EZ Wiring Twice the Strength and Durability of Die Cast & Malleable Iron 120° 120° Threaded Steel Set Screws in Machined Threaded Holes Vibration Resistant 3 x Threaded Holes At 120 D Insulator C Lug Terminal Screw B Steel Screws: 1- Mounting the Lug Set Screws for Bonding to Conduit EZ Installation & Wiring Move Lug to Avoid Interference and Speed Wiring Cat # GB50BGL GB75BGL GB75BGL-0 GB100BGL GB100BGL-0 GB125BGL GB125BGL-0 GB150BGL GB150BGL-0 GB200BGL GB200BGL-0 GB250BGL GB250BGL-250 GB300BGL GB300BGL-250 GB350BGL GB350BGL-250 GB400BGL GB400BGL-250 Trade Size 1/2" 3/4" 3/4" 1" 1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2" 2-1/2" 2-1/2" 3" 3" 3-1/2" 3-1/2" 4" 4" Ø A B C D 1-1/16" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-7/8" 1-7/8" 2-1/16" 2-1/16" 2-11/16" 2-11/16" 3-7/16" 3-7/16" 4" 4" 4-1/2" 4-1/2" 5-1/8" 5-1/8" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 3/4" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-5/16" 1-3/8" 1-11/16" 1-1/2" 1-7/8" 1-11/16" 2-1/16" 1-13/16" 2-1/8" 2-1/6" 2-3/8" 2-13/16" 3-3/8" 3-1/8" 3-11/16" 3-3/8" 3-15/16" 3-15/16" 4-3/16" Lug Wire Range Min Solid Max Strand #14 #4 #14 #4 #8 #1/0 #14 #4 #8 #1/0 #14 #4 #8 #1/0 #14 #4 #8 #1/0 #14 #4 #8 #1/0 #14 #1/0 #6 250 MCM #14 #1/0 #6 250 MCM #14 #1/0 #6 250 MCM #14 #1/0 #6 250 MCM Wt. Per/C 8 8 17 11 20 17 26 21 30 28 36 77 90 89 105 110 124 121 135 Available OPTIONS: Compliances: Certified Made in the USA UL 514B, 467 Insulated Throat Bushing is UL Listed & 150° Rated NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 Aluminum Construction for Aluminum Conduit Add Suffix AL to Cat # * Grounding Lug Options: Copper Lug Add Suffix CU to Cat # Consult Factory for Tin Plated Aluminum Lugs Other Wire Lug Sizes Consult Factory ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number GB Series Available Threaded and NT With and Without Lugs E101868 AMFTGS.com 1/2” - 2” furnished with 1 set screw 2 1/2” - 4” furnished with 2 set screws A t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 47 AMERICAN FITTINGS Corporation ® Ground Bushings AL Thr’d w/Lug Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: GBAL Grounding Bushings Threaded Furnished with Factory Installed AL Lay In Grounding Lug** Material: Alumium (Copper Free) * Made in the USA For Use On Threaded Aluminum Conduit to Provide aMeans of Grounding Threaded Conduit Through an Insulated Bushing. Fully Machined ID for EZ Pull of Wires and Provides Protection for Wires. Furnished with Factory Installed Insulated Throat Bushing UL Listed 150 deg. C Twice the Strength and Durability of Cast Aluminum Products Threaded EZ Installation & Wiring Orientate Lug to Any One of 3 Pre Drilled Threaded Holes Avoids Interference and Speed Wiring 120° 120° Set Screws in Machined Threaded Holes Vibration Resistant 3 x Threaded Holes At 120 D Insulator C Lug Terminal Screw B Screws: 1- Mounting the Lug Set Screws for Bonding to Conduit EZ Installation & Wiring Move Lug to Avoid Interference and Speed Wiring Cat # GB50BGL AL GB75BGL AL GB75BGL-0 AL GB100BGL AL GB100BGL-0 AL GB125BGL AL GB125BGL-0 AL GB150BGLAL GB150BGL-0 AL GB200BGL AL GB200BGL-0 AL GB250BGL AL GB250BGL-250 AL GB300BGL AL GB300BGL-250 AL GB350BGL AL GB350BGL-250 AL GB400BGL AL GB400BGL-250 AL Trade Size 1/2" 3/4" 3/4" 1" 1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2" 2-1/2" 2-1/2" 3" 3" 3-1/2" 3-1/2" 4" 4" 1/2” - 2” furnished with 1 set screw 2 1/2” - 4” furnished with 2 set screws A Ø A B C D 1-1/16" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-7/8" 1-7/8" 2-1/16" 2-1/16" 2-11/16" 2-11/16" 3-7/16" 3-7/16" 4" 4" 4-1/2" 4-1/2" 5-1/8" 5-1/8" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 3/4" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-5/16" 1-3/8" 1-11/16" 1-1/2" 1-7/8" 1-11/16" 2-1/16" 1-13/16" 2-1/8" 2-1/6" 2-3/8" 2-13/16" 3-3/8" 3-1/8" 3-11/16" 3-3/8" 3-15/16" 3-15/16" 4-3/16" Compliances: Certified Made in the USA UL 514B, 467 Insulated Throat Bushing is UL Listed & 150° Rated NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 Lug Wire Range Min Solid Max Strand #14 #4 #14 #4 #8 #1/0 #14 #4 #8 #1/0 #14 #4 #8 #1/0 #14 #4 #8 #1/0 #14 #4 #8 #1/0 #14 #1/0 #6 250 MCM #14 #1/0 #6 250 MCM #14 #1/0 #6 250 MCM #14 #1/0 #6 250 MCM Wt. Per/C 5 6 12 11 15 17 26 21 30 28 36 77 90 89 105 110 124 121 105 Available OPTIONS: Materials: Steel Construction for RGS and IMC Conduit** Grounding Lug Options: Consult Factory for Tin Plated Aluminum Lugs Other Wire Lug Sizes Consult Factory GB Series Available Threaded and NT With and Without Lugs E101868 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 48 AMERICAN FITTINGS Corporation ® Ground Bushings Steel - NT w/Lug Since 1946 Size Range: 1/2” - 4” Industrial SPEC-grade For Use On Rigid/imc & EMT Conduit to Product Series: GBNT GL No Threads (NT)Grounding Bushings Provide a Means of Grounding Conduit Through an Furnished with Factory Installed Lay In Grounding Lug** Insulated Bushing. Material: Solid Alloy Steel Construction* Zinc Plated with Chromate Finish*** Suitable for EMT, RGS and IMC Conduit Made in the USA Fully Machined ID for EZ Pull of Wires and Provides Protection for Wires. Furnished with Factory Installed Insulated Throat Bushing UL Listed 150 deg. C Twice the Strength and Durability of Die Cast & Malleable Iron No Threads EZ Installation & Wiring Orientate Lug to Any One of 3 Pre Drilled Threaded Holes Avoids Interference and Speed Wiring 120° 120° 3 x Threaded Holes At 120 Insulator Steel Set Screws in Machined Threaded Holes Vibration Resistant D C Lug Terminal Screw B 3 x Threaded Holes At 120 Cat # GB50BNTGL GB75BNTGL GB75BNTGL-0 GB100BNTGL GB100BNTGL-0 GB125BNTGL GB125BNTGL-0 GB150BNTGL GB150BNTGL-0 GB200BNTGL GB200BNTGL-0 GB250BNTGL GB250BNTGL-250 GB300BNTGL GB300BNTGL-250 GB350BNTGL GB350BNTGL-250 GB400BNTGL GB400BNTGL-250 Trade Size 1/2" 3/4" 3/4" 1" 1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2" 2-1/2" 2-1/2" 3" 3" 3-1/2" 3-1/2" 4" 4" A A 1-1/16" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-7/8" 1-7/8" 2-1/16" 2-1/16" 2-11/16" 2-11/16" 3-7/16" 3-7/16" 4" 4" 4-1/2" 4-1/2" 5-1/8" 5-1/8" B C D 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 3/4" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-5/16" 1-3/8" 1-11/16" 1-1/2" 1-7/8" 1-11/16" 2-1/16" 1-13/16" 2-1/8" 2-1/6" 2-3/8" 2-13/16" 3-3/8" 3-1/8" 3-11/16" 3-3/8" 3-15/16" 3-15/16" 4-3/16" Compliances: Certified Made in the USA UL 514B, 467 Insulated Throat Bushing is UL Listed & 150° Rated NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 Wire Range Wt. Min Solid Max Strand Per/C #14 #4 7 #14 #4 7 #8 #1/0 15 #14 #4 9 #8 #1/0 17 #14 #4 15 #8 #1/0 22 #14 #4 16 #8 #1/0 24 #14 #4 20 #8 #1/0 28 #14 #1/0 63 #6 250 MCM 78 #14 #1/0 75 #6 250 MCM 90 #14 #1/0 92 #6 250 MCM 105 #14 #1/0 96 #6 250 MCM 113 Available OPTIONS: *Aluminum Construction for Aluminum Conduit Add Suffix AL to Cat # ** Grounding Lug Options Copper Lug Add Suffix CU to Cat #’s Consult Factory for Tin Plated Aluminum Lugs If No Ground Lug is Required, Omit GL From Above Cat #’s *** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number GB Series Available Threaded and NT With and Without Lugs E101868 AMFTGS.com 2 x Set-Screws: 1 - For Mounting The Lug 1 - For Bonding To Conduit t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 49 AMERICAN FITTINGS Corporation ® Ground Bushings Steel - Threaded Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: RCB Rigid Conduit Bushings Threaded Furnished Without a Ground Lug* Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish** For Use On Threaded Rigid/imc Conduit to Provide a Means of Grounding Threaded Conduit Through an Insulated Bushing. Made in the USA Solid Steel Construction with Factory Installed Insulator Precison Cut Machined Threads Flat Hex Surface for Full Torque Values Insulator Throat Bushing Prevents Damage to Wire Twice the Strength and Durability of Die Cast & Malleable Iron D ØA Set Screw Steel Set Screws in Machined Threaded Holes Vibration Resistant Insulator B Hex ØC NPS Thread Set Screws: 1/2” - 2” furnished with 1 set screw - 2 1/2” - 4” furnished with 2 set screws Cat # Trade Size Thread Ø A B (Hex) Ø C D Wt. Per/C RCB 50B 1/2" 1/2" - 14 NPS 1-1/8 1-1/16 9/16 11/16 7 RCB 75B 3/4" 3/4" - 14 NPS 1-1/4 1-3/16 3/4 11/16 7 RCB100B 1" 1" - 11.5 NPS 1-1/2 1-7/16 1 13/16 10 RCB125B 1-1/4" 1-1/4" - 11.5 NPS 1-7/8 1-13/16 1-1/4 7/8 16 RCB150B 1-1/2" 1-1/2" - 11.5 NPS 2-3/16 2-1/16 1-1/2 7/8 20 RCB200B 2" 2 -11.5 NPS 2-11/16 2-9/16 1-15/16 7/8 26 RCB250B 2-1/2" 2-1/2" - 8 NPS 3-7/16 3-1/4 2-1/4 1-1/16 70 RCB300B 3" 3" - 8 NPS 4 3-15/16 2-7/8 1-1/16 85 RCB350B 3-1/2" 3-1/2" - 8 NPS 4-9/16 4-7/16 3-1/4 1-1/16 104 RCB400B 4" 4" - 8 NPS 5-1/8 4-15/16 3-3/4 1-1/16 115 Available Options: Compliances: Certified Made in the USA UL 514B, 467 Insulated Throat Bushing is UL Listed & 150° Rated NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 Aluminum Construction for Aluminum Conduit Add Suffix AL to Cat # * Grounding Lug Options: Aluminum Ground Lug See Group GBGL Copper Lug Add Suffix CU to Cat # Consult Factory for Tin Plated Aluminum Lugs Other Wire Lug Sizes Consult Factory ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number GB Series Available Threaded and NT With and Without Lugs E101868 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 50 AMERICAN FITTINGS Corporation ® Rigid Steel Bushings Set Screw Since 1946 Size Range: 1/2” - 4” Industrial SPEC-grade For Use On NT Rigid/imc and EMT Conduit to Product Series: RCBNT Grounding Bonding Bushings No Threads Provide a Means of Grounding Non-Threaded Conduit Furnished without Ground Lug* Through an Insulated Bushing. Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Suitable for RGS, IMC Conduit and EMT Made in the USA Furnished with Factory Installed Insulated Throat Bushing UL Listed 150 deg. C Fully Machined ID for EZ Pull of Wires and Provides Protection for Wires. No Threads Twice the Strength and Durability of Die Cast & Malleable Iron D A Set Screw Steel Set Screws in Machined Threaded Holes Vibration Resistant Insulator B Hex C Set Screws: 1/2” - 2” furnished with 1 set screw 2 1/2” - 4” furnished with 2 set screws Cat # Trade Size A B (Hex) C D Wt. Per/C RCB 50BNT 1/2" 1-1/8 1-1/16 9/16 11/16 5 RCB 75BNT 3/4" 1-1/4 1-3/16 3/4 11/16 5 RCB100BNT 1" 1-1/2 1-7/16 1 13/16 7 RCB125BNT 1-1/4" 1-7/8 1-13/16 1-1/4 7/8 12 RCB150BNT 1-1/2" 2-3/16 2-1/16 1-1/2 7/8 14 RCB200BNT 2" 2-11/16 2-9/16 1-15/16 7/8 18 RCB250BNT 2-1/2" 3-7/16 3-1/4 2-1/4 1-1/16 58 RCB300BNT 3" 4 3-15/16 2-7/8 1-1/16 70 RCB350BNT 3-1/2" 4-9/16 4-7/16 3-1/4 1-1/16 85 RCB400BNT 4" 5-1/8 4-15/16 3-3/4 1-1/16 93 Compliances: Certified Made in the USA UL 514B, 467 Insulated Throat Bushing is UL Listed & 150° Rated NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 Available OPTIONS Aluminum Construction for Aluminum Conduit Add Suffix AL to Cat # * If Ground Lug is Required, REFER to Cat # GB Series\ GB Series Available Threaded (Rigid) and NT (EMT and Rigid) **Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number E101868 PG | 51 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® 3SizePiece Steel Range:Couplings 1/2” - 4” Since 1946 Product Series: ER Threaded 3 Piece Couplings Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish ** Made in the USA Industrial SPEC-grade AMFICO threaded three piece couplings join two lengths of threaded conduit when neither can be turned. Twice the Strength and Durability with a Fraction of the Weight and Size of Malleable Iron Features: Rain Tight Design Precision Machined Cut Threads Prevents Lazy or Cross Threading* AMFICO EZ Torque Flat Hex Surfaces Easily Torques to Full Values for True & Tight Alignment Suitable for Concrete Tight, Rain Tight, and Direct Burial Applications A B C * TRUE & TIGHT ALIGNMENT AMFICO’s Precison Machine Cut Alloy Steel Assures a Brinell Hardness Two Times Die Cast or Malleable Products PREVENTS Soft Thread Causing Misaligned Pipe and PROVIDES Full Torque Value to Guarantee Tight and Right Connection Cat # ER50 ER75 ER100 ER125 ER150 ER200 ER250 ER300 ER350 ER400 TRADE SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" A LENGTH 1-1/16" 1-1/16" 1-3/8" 1-11/16" 1-3/4" 1-7/8" 2-7/16" 2-7/16" 2-11/16" 2-11/16" B HEX 1-1/16" 1-1/4" 1-9/16" 2" 2-3/16" 2-11/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" C HEX 1-1/8" 1-3/8" 1-5/8" 2-1/16" 2-5/16" 2-13/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" ** Galvanized Plating Available - For this Option, Add Suffix “G” to Above Cat Number Compliances: Certified Made in the USA UL 514B, 467 Class 2 Div 2 Article 500.8(B)(3) Suitable for Concrete Tight, Rain Tight, and Direct Burial Applications NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39131707 AMFTGS.com Wt. Per/C 12 16 28 49 62 88 148 183 212 454 Our Consistency Has You Centered Consistent Precision Centerline on All 3 Components Makes for Easy Alignment of Your Conduit STRENGTH of a Steel Fitting on Your Steel Conduit 52 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® AMFICO WaterTIGHT Ground Hubs Since 1946 The NEXT Generation of Myers Hub. We Didn’t Imitate It! We Reengineered It ! Designed with the Help of Contractors, Then Engineered & Manufactured by AMFICO in the USA AH Series Hubs Size Range: 1/2” - 4”, Available in Alloy Steel, Aluminum, Stainless Steel Full Zinc Plating with a Chromate Finish or Galvanized Plating Option Twice the Strength and Durability of ALL Cast Products, Takes Up Less Space In and Out of the Box A Steel Hub that Matches Your Rigid Steel Conduit, Thread Steel on Steel and Eliminate Inferior Die Cast or Malleable Iron Issues Sleek Modern Design Matches Newer Panel Appearances Exclusive EZ Fit Conduit Entrance Hub Entry is Chamfered & Allows Proper Conduit Alignment & Strength of the Steel Threads Ensures Watertight Sealing at Entry Machined Cut Steel NPT Threads at Conduit Entry Avoid Soft Material Cross Threading Sealsl Tight On Rigid Conduit Low Profile Design Takes Up Less Exterior Space On Your Enclosure and Less Interior Space for Ease of Wiring Flat Hex Surfaces Provides Full Torque Value to Locknut for Full Environmental Protection Entire Fitting is Precision Machined Provides a Unform Center Line Maintains Integrity of Connector through the Enclosure Large Wires No Problem to Pull Mirror Smooth ID Surface for EZ No Snag, Burrless Wire Pulls Factory Installed Insulated Bushing UL Rated 150°C Will Not Pull Out During Large Size Wire Pulls Strength of Steel Hub Self Aligns Conduit Vertically to Enclosure Avoiding Gaps and Alignment Issues Machined Alloy SteeL Concave Retention Ring Seats Sealing Washer Tight & Flat HPDE Corrosion Resistant FLAT Sealing Washer is Shrouded in Retention Ring Ensures a Positive Seal & Bond Unlike “O” Ring Products, This Hub Seal is Flat & Uniform at Entry Exclusive TrueTIGHT Locknut Locknut has Flat Hex Surface For EZ Interior Access and Full Torque Fully Machined Distinctive Diamond Shaped Knurled Serrations Bite TIGHT & RIGHT Into All Metals & Finishes Threaded Holes Provided Allows Addition of Lug or Grounding After Rough In or Inspection Will Not Vibrate Loose Maintains Watertight Seal Will Not Harm or Crack FRP, Non-Metallic Enclosures Unique Solid Steel Locknut With Numerous Grounding Options (can be purchased separately) PG | Notches On OD of Locknut Provide a Strong Precision Area to Bump & Lock in Place 53 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® AMFICO WaterTIGHT Ground Hubs Since 1946 More Options Offered to Meet Your Requirements AH Series AMFICO Hubs Size Range: 1/2” to 4” Trade Sizes Materials Available: • Alloy Steel • Aluminum Style 1 AHB Standard Hub Available with a Single Ground Screw on Locknut Replaces All ST, WH, HUB, & CH Series Competitors’ Hubs • Stainless Steel Compliances: Certified Made in the USA UL Listed: 514B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 Certified for MIL-STD 810 Sinusoidal Vibrations Style 2 AHBGS Ground Hub * with Tab with Ground Screw Replaces All STG, HUBG, & CHT Competitors’ Hubs Federal Standard A-A-50553 * Classified for Service Entrance Meets the Requirements of NEC Article 250.92 for Bonding of Equipment for Services and NEC 250.97 CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant UNSPSC 39121311 Style 3 AHBGL Ground Hub* with Lay-In Lug Avail up to 250mcm UL Listed Replaces DCG & WHG Competitors’ Hubs File # E258495 * Ideal Connection for Service Entrance Equipment American Fittings Hub Compared to the Competition Material Comparison of Electrical Fittings Alloy Steel Bar Malleable Iron ASTM Physical Test AMFICO THEIRS * Zinc Die Cast THEIRS Tensile Strength KPSI 78 41 37 Brinell Hardness 168 102-116 80 Consider the durability of the fitting, strength under load, and hardness of threads to maintain environmental integrity. Our thread strength ensures stress free installations. PG | 54 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Ground Hubs Steel Water Tight Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AH Threaded Ground Hub Water Tight Material: Solid Alloy Steel Construction * Zinc Plated, Chromate Finish** Sealing Ring: HPDE Chemical Resistant Polyethylene Insulated Throat Bushing: UL Listed Rated 150º c AMFICO AH Series Ground Hubs connect Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with various options. The combination of an insulated threaded hub and grounding locknut provides a reliable ground fault path for service entrance equipment, eliminating the need to install an additional grounding bushing. Made in the USA AMFICO’s Hubs meet the requirements of NEC Article 250.92 for Bonding of Equipment for Services and NEC 250.97 Solid Steel Construction Precison Cut Machined Threads Low Profile Design - More Wiring Space and Conduit Space Flat Hex Surface for Full Torque Values Guaranteed Water Tight 60°x 6 A NPT D Twice the Strength & Durability of ALL Cast and Malleable Iron Products A NPS Cat # Trade Size B C (Hex) ØD E F ØG H*** Wt. Per/C AH50B 1/2" 1/2"-14 1-3/16 1-1/8 1-3/16 9/16 7/8 9/16 3/32 17 AH75B 3/4" 3/4"-14 1-3/16 1-3/8 1-7/16 9/16 1-1/8 3/4 3/32 22 AH100B 1" 1"-11.5 1-1/2 1-5/8 1-11/16 11/16 1-3/8 1 3/16 39 AH125B 1-1/4" 1-1/4"-11.5 1-1/2 2-1/16 2-1/8 11/16 1-3/4 1-5/16 3/16 50 AH150B 1-1/2" 1-1/2"-11.5 1-1/2 2-3/16 2-5/16 11/16 2 1-9/16 3/16 52 2"-11.5 1-1/2 2-11/16 2-3/4 11/16 2-1/2 2 3/16 67 2-1/2"-8 2-1/2 3-7/16 1-1/8 3 2-5/16 3/8 173 3-5/8 2-15/16 3/8 231 4-1/8 AH200B 2" AH250B 2-1/2" AH300B 3" AH350B 3-1/2" AH400B 4" A Threads ( f NPT - m NPS) 3-1/4 4 3"-8 2-9/16 3-15/16 1-1/8 3 -1/2"-8 2-9/16 4-7/16 4-9/16 1-1/8 4"-8 2-9/16 4-15/16 5-1/8 1-1/8 4-11/16 3-7/16 3/8 285 3-7/8 3/8 338 *** "H" Dimension Indicates Maximum Panel Thickness Hub Will Accomodate. Available OPTIONS: * Materials: Aluminun Copper Free and Select Sizes in Stainless Steel T316 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 Certified for MIL-STD 810 Sinusoidal Vibrations Federal Standard A-A-50553 UL Standards: 514B, 467 Classified for Service Entrance CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant File # E258495 UNSPSC 39121311 AMFTGS.com ** Galvanized Plating Option Add Suffix “G” to cat # i.e. AH50BG minimum qtys may apply Grounding Options (See Individual Catalog Pages) Ground Screw, Bonding Strap, or Ground Lugs Copper Lugs and Aluminum Ground Lugs with Various Size Wire Capacity Options Available 55 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Ground Hubs Steel Water Tight -GS Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AHGS Threaded Ground Hub Water Tight with Grounding Strap Material: Solid Alloy Steel Construction * Zinc Plated, Chromate Finish** Sealing Ring: HPDE Chemical Resistant Polyethylene Insulated Throat Bushing: UL Listed Rated 150º c AMFICO AH Series Ground Hubs connect Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with various options. The combination of an insulated threaded hub and grounding locknut provides a reliable ground fault path for service entrance equipment, eliminating the need to install an additional grounding bushing. Made in the USA AMFICO’s Hubs meet the requirements of NEC Article 250.92 for Bonding of Equipment for Services and NEC 250.97 Solid Steel Construction Precison Cut Machined Threads Low Profile Design - More Wiring Space and Conduit Space Flat Hex Surface for Full Torque Values C Hex F Guaranteed Water Tight A NPT E ØD Trade Size Cat # A Threads ( f NPT - m NPS) B C (Hex) D E F Wt. Per/C Maximum CU Ground Wire Size 1/2” - 2” #8 2-1/2’” - 3-1/2” #6 4” #4 AH 50BGS 1/2" 1/2" - 14 1-3/16 1-1/8 1-1/4 9/16 13/16 18 AH 75BGS 3/4" 3/4" - 14 1-3/16 1-3/8 1-1/2 9/16 13/16 23 AH100BGS 1" 1" - 11.5 1-1/2 1-5/8 1-13/16 11/16 13/16 40 AH125BGS 1-1/4" 1-1/4" - 11.5 1-1/2 2-1/8 2-1/4 11/16 13/16 51 AH150BGS 1-1/2" 1-1/2" - 11.5 1-1/2 2-1/4 2-3/8 11/16 13/16 53 AH200BGS 2" 2" - 11.5 1-1/2 2-13/16 2-7/8 11/16 13/16 69 AH250BGS 2-1/2" 2-1/2" - 8 2 -1/2 3-1/4 3-7/16 1-1/8 13/16 177 AH300BGS 3" 3" - 8 2-9/16 3-15/16 4 1-1/8 13/16 233 AH350BGS 3-1/2" 3-1/2" - 8 2-9/16 4-7/16 4-9/16 1-1/8 13/16 289 AH400BGS 4" 4" - 8 2-9/16 4-15/16 5-1/8 1-1/8 13/16 340 Maxmimum Panel Thickness with locknut secured - 1/2” to 3/4” = 3/32” 1” to 2” - 3/16” AMFTGS.com 2 1/2” to 4” = 3/8” Available OPTIONS: * Materials: Aluminun Copper Free and Select Sizes in Stainless Steel T316 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 Certified for MIL-STD 810 Sinusoidal Vibrations Federal Standard A-A-50553 UL Standards: 514B, 467 Classified for Service Entrance CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant File # E258495 UNSPSC 39121311 PG | Twice the Strength & Durability of ALL Cast and Malleable Iron Products A NPS B ** Galvanized Plating Option Add Suffix “G” to cat # i.e. AH50BG minimum qtys may apply Grounding Options (See Individual Catalog Pages) Ground Screw, or Ground Lugs Copper Lugs and Aluminum Ground Lugs with Various Size Wire Capacity Options Available t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 56 AMERICAN FITTINGS Corporation ® Ground Hubs Steel Water Tight - GL Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AHGS Threaded Ground Hub Water Tight with Factory Installed Aluminum Ground Lay-In Lug *** Material: Solid Alloy Steel Construction * Zinc Plated, Chromate Finish** Sealing Ring: HPDE Chemical Resistant Polyethylene Insulated Throat Bushing: UL Listed Rated 150º c AMFICO AH Series Ground Hubs connect Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with a layin-lug. The combination of an insulated threaded hub and grounding locknut provides a reliable ground fault path for service entrance equipment, eliminating the need to install an additional grounding bushing. Made in the USA AMFICO’s Hubs meet the requirements of NEC Article 250.92 for Bonding of Equipment for Services and NEC 250.97 Solid Steel Construction Precison Cut Machined Threads Low Profile Design - More Wiring Space and Conduit Space Flat Hex Surface for Full Torque Values Guaranteed Water Tight F C Hex Factory Installed Ground Lug A NPS A NPT Twice the Strength & Durability of ALL Zinc Cast and Malleable Products E B Ø D Cat # Trade Size AH 50BGL 1/2" AH 75BGL AH100BGL B C (Hex) D E F Wt. Per/C 1/2" - 14 1-3/16 1-1/8 1-1/4 9/16 3/4 8 1/2” #14-#4 3/4" 3/4" - 14 1-3/16 1-3/8 1-1/2 9/16 3/4 10 3/4” #14-#4 1" 1" - 11.5 1-1/2 1-5/8 1-13/16 11/16 3/4 16 1” #14-#4 1-1/4" 1-1/4" - 11.5 1-1/2 2-1/8 2-1/4 11/16 3/4 21 1 1/4” #14-#4 AH150BGL 1-1/2" 1-1/2" - 11.5 1-1/2 2-1/4 2-3/8 11/16 3/4 22 1 1/2” #14-#4 AH200BGL 2" 2" - 11.5 1-1/2 2-13/16 2-7/8 11/16 3/4 30 2” #14-#4 AH250BGL 2-1/2" 2-1/2" - 8 2 -1/2 3-1/4 3-7/16 1-1/8 3/4 69 2 1/2” #8-2/0 AH300BGL 3" 3" - 8 2-9/16 3-15/16 4 1-1/8 3/4 88 3” #8-2/0 AH350BGL 3-1/2" 3-1/2" - 8 2-9/16 4-7/16 4-9/16 1-1/8 3/4 114 3 1/2” #8-2/0 AH400BGL 4" 4" - 8 2-9/16 4-15/16 5-1/8 1-1/8 3/4 127 4” #8-2/0 AH125BGL A Threads ( f NPT - m NPS) Maxmimum Panel Thickness with locknut secured - 1/2” to 3/4” = 3/32” AMFTGS.com 2 1/2” to 4” = 3/8” *** Larger Wire Capacities Avail. Consult Factory Standard Lug is AL CU Lug Available Available OPTIONS: * Materials: Aluminun Copper Free and Select Sizes in Stainless Steel T316 ** Galvanized Plating Option Add Suffix “G” to cat # i.e. AH50BG - minimum qtys may apply Other Grounding Options (See Individual Catalog Pages) Ground Strap or Ground Screw *** Copper Lugs and Aluminum Ground Lugs with Various Size Wire Capacity Options Available up to 250mcm Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 Certified for MIL-STD 810 Sinusoidal Vibrations Federal Standard A-A-50553 UL Standards: 514B, 467 Classified for Service Entrance CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant File # E258495 UNSPSC 39121311 PG | 1” to 2” - 3/16” Standard Lug Wire Capacities Trade Size AWG Ground Lugs are Manufactured from High Strength 6061-T6 Aluminum, and are Ideally Suited for Grounding and Bonding Applications Accommodating Both Copper and Aluminum Conductor Sizes #14 AWG to 250 KCMIL, UL486B Listed, AL9CU Rated, for Copper and Aluminum t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 57 AMERICAN FITTINGS Corporation ® Ground Hubs Steel Water Tight -BS Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AHGS Threaded Ground Hub Water Tight with Single Bonding/Ground Screw Material: Solid Alloy Steel Construction * Zinc Plated, Chromate Finish** Sealing Ring: HPDE Chemical Resistant Polyethylene Insulated Throat Bushing: UL Listed Rated 150º c AMFICO AH Series Ground Hubs connect Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with various options. The combination of an insulated threaded hub and grounding locknut provides a reliable ground fault path for service entrance equipment, eliminating the need to install an additional grounding bushing. Made in the USA AMFICO’s Hubs meet the requirements of NEC Article 250.92 for Bonding of Equipment for Services and NEC 250.97 Solid Steel Construction Precison Cut Machined Threads Low Profile Design - More Wiring Space and Conduit Space Flat Hex Surface for Full Torque Values Guaranteed Water Tight Steel Bonding Ground Screw C Hex A NPT E ØD Cat # Trade Size A Threads ( f NPT - m NPS) Twice the Strength & Durability of ALL Cast and Malleable Iron Products A NPS B B C (Hex) ØD E Wt. Per/C AH 50BS 1/2" 1/2" - 14 1-3/16 1-1/8 1-1/4 9/16 18 AH 75BS 3/4" 3/4" - 14 1-3/16 1-3/8 1-1/2 9/16 23 AH100BS 1" 1" - 11.5 1-1/2 1-5/8 1-13/16 11/16 40 AH125BS 1-1/4" 1-1/4" - 11.5 1-1/2 2-1/8 2-1/4 11/16 51 AH150BS 1-1/2" 1-1/2" - 11.5 1-1/2 2-1/4 2-3/8 11/16 53 AH200BS 2" 2" - 11.5 1-1/2 2-13/16 2-7/8 11/16 69 AH250BS 2-1/2" 2-1/2" - 8 2 -1/2 3-1/4 3-7/16 1-1/8 177 AH300BS 3" 3" - 8 2-9/16 3-15/16 4 1-1/8 233 AH350BS 3-1/2" 3-1/2" - 8 2-9/16 4-7/16 4-9/16 1-1/8 289 AH400BS 4" 4" - 8 2-9/16 4-15/16 5-1/8 1-1/8 340 Maxmimum Panel Thickness with locknut secured - 1/2” to 3/4” = 3/32” 1” to 2” - 3/16” 2 1/2” to 4” = 3/8” Maximum Ground/Bonding Wire is # 6 AWG. Alternative item is ground strap or ground layin lug. Available OPTIONS: * Materials: Aluminun Copper Free and Select Sizes in Stainless Steel T316 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 Certified for MIL-STD 810 Sinusoidal Vibrations Federal Standard A-A-50553 UL Standards: 514B, 467 Classified for Service Entrance CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant File # E258495 UNSPSC 39121311 PG | AMFTGS.com ** Galvanized Plating Option Add Suffix “G” to cat # i.e. AH50BG minimum qtys may apply Grounding Options (See Individual Catalog Pages) GroundBonding Strap or Ground Lugs Copper Lugs and Aluminum Ground Lugs with Various Size Wire Capacity Options Available t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 58 AMERICAN FITTINGS Corporation ® Ground Hubs Aluminum Water Tight Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AH Threaded Ground Hub Water Tight Material: Alumium (Copper Free) * Sealing Ring: HPDE Chemical Resistant Polyethylene Insulated Throat Bushing: UL Listed Rated 150º c AMFICO AH Series Ground Hubs connect Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with various options. The combination of an insulated threaded hub and grounding locknut provides a reliable ground fault path for service entrance equipment, eliminating the need to install an additional grounding bushing. Made in the USA AMFICO’s Hubs meet the requirements of NEC Article 250.92 for Bonding of Equipment for Services and NEC 250.97 Solid Aluminum (Cu Free) Bar Stock Construction Precison Cut Machined Threads Low Profile Design - More Wiring Space and Conduit Space Flat Hex Surface for Full Torque Values Guaranteed Water Tight 60°x 6 A NPT D Twice the Strength & Durability of ALL Cast Aluminum Products A NPS Cat # Trade Size A Threads ( f NPT - m NPS) B C (Hex) ØD E F ØG H*** Wt. Per/C AH50BAL 1/2" 1/2"-14 1-3/16 1-1/8 1-3/16 9/16 7/8 9/16 3/32 6 AH75BAL 3/4" 3/4"-14 1-3/16 1-3/8 1-7/16 9/16 1-1/8 3/4 3/32 8 AH100BAL 1" 1"-11.5 1-1/2 1-5/8 1-11/16 11/16 1-3/8 1 3/16 14 AH125BAL 1-1/4" 1-1/4"-11.5 1-1/2 2-1/16 2-1/8 11/16 1-3/4 1-5/16 3/16 19 AH150BAL 1-1/2" 1-1/2"-11.5 1-1/2 2-3/16 2-5/16 11/16 2 1-9/16 3/16 20 AH200BAL 2" 2"-11.5 1-1/2 2-11/16 2-3/4 11/16 2-1/2 2 3/16 27 AH250BAL 2-1/2" 2-1/2"-8 2-1/2 3-7/16 1-1/8 3 2-5/16 3/8 61 3-5/8 2-15/16 3/8 82 4-1/8 AH300BAL 3" AH350BAL 3-1/2" AH400BAL 4" 3-1/4 4 3"-8 2-9/16 3-15/16 1-1/8 3 -1/2"-8 2-9/16 4-7/16 4-9/16 1-1/8 4"-8 2-9/16 4-15/16 5-1/8 1-1/8 4-11/16 3-7/16 3/8 107 3-7/8 3/8 119 *** "H" Dimension Indicates Maximum Panel Thickness Hub Will Accomodate. Available OPTIONS: * Materials: Steel Construction Select Sizes in Stainless Steel T316 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 Federal Standard A-A-50553 UL Standards: 514B, 467 Classified for Service Entrance CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant UNSPSC 39121311 Grounding Options (See Individual Catalog Pages) Ground Screw, Bonding Strap, or Ground Lugs Copper Lugs and Aluminum Ground Lugs with Various Size Wire Capacity Options Available File # E258495 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 59 AMERICAN FITTINGS Corporation ® Ground Hubs AL Water Tight -GS Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AHGS Threaded Ground Hub Water Tight with Grounding Strap Material: Alumium (Copper Free) * Sealing Ring: HPDE Chemical Resistant Polyethylene Insulated Throat Bushing: UL Listed Rated 150º c AMFICO AH Series Ground Hubs connect Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with various options. The combination of an insulated threaded hub and grounding locknut provides a reliable ground fault path for service entrance equipment, eliminating the need to install an additional grounding bushing. Made in the USA AMFICO’s Hubs meet the requirements of NEC Article 250.92 for Bonding of Equipment for Services and NEC 250.97 Solid AL Bar Stock Construction Precison Cut Machined Threads Low Profile Design - More Wiring Space and Conduit Space Flat Hex Surface for Full Torque Values C Hex F Guaranteed Water Tight A NPT E A NPS B ØD B C (Hex) D E F Wt. Per/C Maximum CU Ground Wire Size 1/2" - 14 1-3/16 1-1/8 1-1/4 9/16 13/16 6 3/4" 3/4" - 14 1-3/16 1-3/8 1-1/2 9/16 13/16 8 AH100BGSAL 1" 1" - 11.5 1-1/2 1-5/8 1-13/16 11/16 13/16 14 1/2” - 2” #8 2-1/2’” - 3 1/2” #6 4” #4 AH125BGSAL 1-1/4" 1-1/4" - 11.5 1-1/2 2-1/8 2-1/4 11/16 13/16 19 AH150BGSAL 1-1/2" 1-1/2" - 11.5 1-1/2 2-1/4 2-3/8 11/16 13/16 20 AH200BGSAL 2" 2" - 11.5 1-1/2 2-13/16 2-7/8 11/16 13/16 27 AH250BGSAL 2-1/2" 2-1/2" - 8 2 -1/2 3-1/4 3-7/16 1-1/8 13/16 61 AH300BGSAL 3" 3" - 8 2-9/16 3-15/16 4 1-1/8 13/16 82 AH350BGSAL 3-1/2" 3-1/2" - 8 2-9/16 4-7/16 4-9/16 1-1/8 13/16 107 AH400BGSAL 4" 4" - 8 2-9/16 4-15/16 5-1/8 1-1/8 13/16 119 Cat # Trade Size AH 50BGSAL 1/2" AH 75BGSAL A Threads ( f NPT - m NPS) Maxmimum Panel Thickness with locknut secured - 1/2” to 3/4” = 3/32” 1” to 2” - 3/16” 2 1/2” to 4” = 3/8” Available OPTIONS: * Materials: Steel Construction Select Sizes in Stainless Steel T316 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 Federal Standard A-A-50553 UL Standards: 514B, 467 Classified for Service Entrance CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant UNSPSC 39121311 With Aluminum Layin Ground Lug File # E258495 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 60 AMERICAN FITTINGS Corporation ® Ground Hubs Aluminum WT - GL Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AH Threaded Ground Hub Water Tight with Factory Installed Aluminum Ground Lug ** Material: Alumium (Copper Free) * Sealing Ring: HPDE Chemical Resistant Polyethylene Insulated Throat Bushing: UL Listed Rated 150º c AMFICO AH Series Ground Hubs connect Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with a layin-lug. The combination of an insulated threaded hub and grounding locknut provides a reliable ground fault path for service entrance equipment, eliminating the need to install an additional grounding bushing. Made in the USA AMFICO’s Hubs meet the requirements of NEC Article 250.92 for Bonding of Equipment for Services and NEC 250.97 Solid Aluminum (Cu Free) Bar Stock Construction Precison Cut Machined Threads Low Profile Design - More Wiring Space and Conduit Space Flat Hex Surface for Full Torque Values Guaranteed Water Tight F C Hex Factory Installed Ground Lug A NPS A NPT Twice the Strength & Durability of ALL Cast Aluminum Products E B Ø D Cat # Trade Size AH 50BGL AL 1/2" AH 75BGL AL B C (Hex) D E F Wt. Per/C 1/2" - 14 1-3/16 1-1/8 1-1/4 9/16 3/4 6 1/2” #14-#4 3/4" 3/4" - 14 1-3/16 1-3/8 1-1/2 9/16 3/4 8 3/4” #14-#4 AH100BGL AL 1" 1" - 11.5 1-1/2 1-5/8 1-13/16 11/16 3/4 14 1” #14-#4 AH125BGL AL 1-1/4" 1-1/4" - 11.5 1-1/2 2-1/8 2-1/4 11/16 3/4 19 1 1/4” #14-#4 AH150BGL AL 1-1/2" 1-1/2" - 11.5 1-1/2 2-1/4 2-3/8 11/16 3/4 20 1 1/2” #14-#4 AH200BGL AL 2" 2" - 11.5 1-1/2 2-13/16 2-7/8 11/16 3/4 27 2” #14-#4 AH250BGL AL 2-1/2" 2-1/2" - 8 2 -1/2 3-1/4 3-7/16 1-1/8 3/4 61 2 1/2” #8-2/0 AH300BGL AL 3" 3" - 8 2-9/16 3-15/16 4 1-1/8 3/4 82 3” #8-2/0 AH350BGL AL 3-1/2" 3-1/2" - 8 2-9/16 4-7/16 4-9/16 1-1/8 3/4 3 1/2” #8-2/0 AH400BGL AL 4" 4" - 8 2-9/16 4-15/16 5-1/8 1-1/8 3/4 107 119 4” #8-2/0 A Threads ( f NPT - m NPS) Maxmimum Panel Thickness with locknut secured - 1/2” to 3/4” = 3/32” *** Larger Wire Capacities Avail. Consult Factory Ground Strap or Ground Screw ** Various Size Wire Capacity Options Available up to 250mcm Ground Lugs are Manufactured from High Strength 6061-T6 Aluminum, and are Ideally Suited for Grounding and Bonding Applications Accommodating Both Copper and Aluminum Conductor Sizes #14 AWG to 250 KCMIL, UL486B Listed, AL9CU Rated, for Copper and Aluminum File # E258495 AMFTGS.com 2 1/2” to 4” = 3/8” Available OPTIONS: * Materials: Steel Construction Select Sizes in Stainless Steel T316 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 Federal Standard A-A-50553 UL Standards: 514B, 467 Classified for Service Entrance CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant UNSPSC 39121311 PG | 1” to 2” - 3/16” Standard Lug Wire Capacities Trade Size AWG t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 61 AMERICAN FITTINGS Corporation ® Rigid Steel Reducing Bushings -OL Since 1946 Size Range: 1/2” -4” Product Series: RB Reducing Bushings for Ordinary Locations Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Industrial SPEC-grade B For Use on Rigid / IMC Conduit Reduces the Threaded Opening on Conduit Bodies or any Female Threaded Fitting. Made in the USA Features: Precision Machined Cut Threads Smooth ID for EZ Fast Wire Pull f NPSM m NPSM Twice the Strength and Durability of Die Cast & Malleable Products A Trade Size A RB5038 1/2" x 3/8" 9/16" 13/16" Wt. Per/C 2 RB7550 3/4" x 1/2" 9/16" 1" 4 RB10050 1" x 1/2" 5/8" 1-5/16" 12 RB10075 1" x 3/4" 5/8" 1-5/16" 7 RB12550 1-1/4" x 1/2" 11/16" 1-5/8" 26 RB12575 1-1/4" x 3/4" 11/16" 1-5/8" 22 RB125100 1-1/4" x 1" 11/16" 1-5/8" 13 Cat # Oridnary Locations Steel Reducing Bushings Compliances: Certified Made in the USA UL 514B, 467 NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant File # E93605 UNSPSC 39121312 Available Options: ** Galvanized Plating Option Available Add suffix “G” to cat #’s Other Configurations and Material Hazardous Locations in Steel and Aluminum PG | B RB15050 1-1/2" x 1/2" 7/8" 1-7/8" 40 RB15075 1-1/2" x 3/4" 7/8" 1-7/8" 34 RB150100 1-1/2" x 1" 7/8" 1-7/8" 26 RB150125 1-1/2" x 1-1/4" 7/8" 1-7/8" 11 RB20050 2" x 1/2" 7/8" 2-5/16" 80 RB20075 2" x 3/4" 7/8" 2-5/16" 74 RB200100 2" x 1" 7/8" 2-5/16" 64 RB200125 2" x 1-1/4" 7/8" 2-5/16" 46 RB200150 2" x 1-1/2" 7/8" 2-5/16" 30 RB250100 2-1/2" x 1" 15/16" 2-13/16" 118 RB250125 2-1/2" x 1-1/4" 15/16" 2-13/16" 98 RB250150 2-1/2" x 1-1/2" 15/16" 2-13/16" 81 RB250200 2-1/2" x 2" 15/16" 2-13/16" 44 RB300125 3" x 1-1/4" 1-1/16" 2-7/16" 194 RB300150 3" x 1-1/2" 1-1/16" 2-7/16" 178 RB300200 3" x 2" 1-1/16" 2-7/16" 135 RB300250 3" x 2-1/2" 1-1/16" 2-7/16" 80 RB350150 3-1/2" x 1-1/2" 1-1/16" 2-15/16" 261 RB350200 3-1/2" x 2" 1-1/16" 2-15/16" 215 RB350250 3-1/2" x 2-1/2" 1-1/16" 2-15/16" 161 RB350300 3-1/2" x 3" 1-1/16" 2-15/16" 74 RB400200 4" x 2" 1-1/16" 4-7/16" 308 RB400250 4" x 2-1/2" 1-1/16" 4-7/16" 257 RB400300 4" x 3" 1-1/16" 4-7/16" 167 RB400350 4" x 3-1/2" 1-1/16" 4-7/16" 85 62 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Rigid Steel Reducing Bushings - Haz. Since 1946 Size Range: 1/2” - 4” Product Series: RBH Reducing Bushings for Hazardous Locations Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Made in the USA Industrial SPEC-grade For Use on Rigid / IMC Conduit Reduces the Threaded Opening on Conduit Bodies or any Female Threaded Fitting. C D Twice the Strength and Durability of Die Cast & Malleable Products Features: Precision Machined Cut NPT Tapered Threads Smooth ID for EZ Fast Wire Pull B A TRADE SIZE CAT # Solid Alloy Steel Hazardous Locations Reducing Bushings Compliances: Certified Made in the USA UL 1203 UL Listed for Hazardous Locations, Class I, Division 1 & 2, Groups A, B, C, D Class II, Division 1, Groups E, F, G Class II, Div 1 & 2 NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 30 RoHS and REACH Compliant File # E93605 Prop.65 CA Compliant UNSPSC 39121312 Available Options: RB7550H RB10050H RB10075H RB12550H RB12575H RB125100H RB15050H RB15075H RB150100H RB150125H RB20050H RB20075H RB200100H RB200125H RB200150H RB250100H RB250125H RB250150H RB250200H RB300125H RB300150H RB300200H RB300250H RB350150H RB350200H RB350250H RB350300H RB400200H RB400250H RB400300H RB400350H 3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1-1/4" x 1/2" 1-1/4" x 3/4" 1-1/4" x 1" 1-1/2" x 1/2" 1-1/2" x 3/4" 1-1/2" x 1" 1-1/2" x 1-1/4" 2" x 1/2" 2" x 3/4" 2" x 1" 2" x 1-1/4" 2" x 1-1/2" 2-1/2" x 1" 2-1/2" x 1-1/4" 2-1/2" x 1-1/2" 2-1/2" x 2" 3" x 1-1/4" 3" x 1-1/2" 3" x 2" 3" x 2-1/2" 3-1/2" x 1-1/2" 3-1/2" x 2" 3-1/2" x 2-1/2" 3-1/2" x 3" 4" x 2" 4" x 2-1/2" 4" x 3" 4" x 3-1/2" A EXTERNAL THREAD 3/4"-14 NPT 1"-11.5 NPT 1"-11.5 NPT 1-1/4"-11.5 NPT 1-1/4"-11.5 NPT 1-1/4"-11.5 NPT 1-1/2"-11.5 NPT 1-1/2"-11.5 NPT 1-1/2"-11.5 NPT 1-1/2"-11.5 NPT 2"-11.5 NPT 3/4"-14 NPT 2"-11.5 NPT 2"-11.5 NPT 2"-11.5 NPT 2-1/2"-8 NPT 2-1/2"-8 NPT 2-1/2"-8 NPT 2-1/2"-8 NPT 3"-8 NPT 3"-8 NPT 3"-8 NPT 3"-8 NPT 3-1/2"-8 NPT 3-1/2"-8 NPT 3-1/2"-8 NPT 3-1/2"-8 NPT 4"-8 NPT 4"-8 NPT 4"-8 NPT 4"-8 NPT B C INTERNAL LENGTH THREAD 1/2"-14 NPT 3/4" 1/2"-14 NPT 3/4" 3/4"-14 NPT 3/4" 1/2"-14 NPT 7/8" 3/4"-14 NPT 7/8" 1"-11.5 NPT 7/8" 1/2"-14 NPT 15/16" 3/4"-14 NPT 15/16" 1"-11.5 NPT 15/16" 1-1/4"-11.5 NPT 15/16" 1/2"-14 NPT 15/16" 3/4"-14 NPT 15/16" 1"-11.5 NPT 15/16" 1-1/4"-11.5 NPT 15/16" 1-1/2"-11.5 NPT 15/16" 1-1/8" 1"-11.5 NPT 1-1/4"-11.5 NPT 1-1/8" 1-1/2"-11.5 NPT 1-1/8" 1-1/8" 2"-11.5 NPT 1-1/4"-11.5 NPT 1-1/8" 1-1/2"-11.5 NPT 1-1/8" 1-1/8" 2"-11.5 NPT 1-1/8" 2-1/2"-8 NPT 1-1/2"-11.5 NPT 1-1/4" 1-1/4" 2"-11.5 NPT 1-1/4" 2-1/2"-8 NPT 1-1/4" 3"-8 NPT 1-1/4" 2"-11.5 NPT 1-1/4" 2-1/2"-8 NPT 1-1/4" 3"-8 NPT 1-1/4" 3-1/2"-8 NPT D DIAMETER Wt. Per/C 1-1/16" 1-5/16" 1-5/16" 1-5/8" 1-5/8" 1-5/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 3-7/16" 3-7/16" 3-7/16" 3-7/16" 4" 4" 4" 4" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 5 14 8 34 27 17 52 46 35 15 107 86 74 48 38 147 121 105 59 220 210 148 96 290 238 186 82 340 285 230 126 Other Configurations and Material Hazardous Locations in Aluminum Construction Ordinary Locations in Steel and Aluminum ** Galvanized Plating Option Available Add suffix “G” to cat #’s PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 63 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Rigid AL Reducing Bushings - Haz. Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: RBH Reducing Bushings for Hazardous Locations Material: Aluminum (Copper Free) Solid Bar Construction Made in the USA For Use on Rigid / IMC Conduit Reduces the Threaded Opening on Conduit Bodies or any Female Threaded Fitting. C D Twice the Strength and Durability of Cast Aluminum Features: Precision Machined Cut NPT Tapered Threads Smooth ID for EZ Fast Wire Pull B A CAT # ALUMINUM (Cu Free) Hazardous Locations Reducing Bushings Compliances: Certified Made in the USA UL 1203 UL Listed for Hazardous Locations, Class I, Division 1 & 2, Groups A, B, C, D Class II, Division 1, Groups E, F, G Class II, Div 1 & 2 NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 30 RoHS and REACH Compliant File # E93605 Prop.65 CA Compliant UNSPSC 39121312 Available Options: RB7550HAL RB10050HAL RB10075HAL RB12550HAL RB12575HAL RB125100HAL RB15050HAL RB15075HAL RB150100HAL RB150125HAL RB20050HAL RB20075HAL RB200100HAL RB200125HAL RB200150HAL RB250100HAL RB250125HAL RB250150HAL RB250200HAL RB300125HAL RB300150HAL RB300200HAL RB300250HAL RB350150HAL RB350200HAL RB350250HAL RB350300HAL RB400200HAL RB400250HAL RB400300HAL RB400350HAL Trade Size 3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1-1/4" x 1/2" 1-1/4" x 3/4" 1-1/4" x 1" 1-1/2" x 1/2" 1-1/2" x 3/4" 1-1/2" x 1" 1-1/2" x 1-1/4" 2" x 1/2" 2" x 3/4" 2" x 1" 2" x 1-1/4" 2" x 1-1/2" 2-1/2" x 1" 2-1/2" x 1-1/4" 2-1/2" x 1-1/2" 2-1/2" x 2" 3" x 1-1/4" 3" x 1-1/2" 3" x 2" 3" x 2-1/2" 3-1/2" x 1-1/2" 3-1/2" x 2" 3-1/2" x 2-1/2" 3-1/2" x 3" 4" x 2" 4" x 2-1/2" 4" x 3" 4" x 3-1/2" A B Internal External Thread Thread 3/4"-14 NPT 1/2"-14 NPT 1"-11.5 NPT 1/2"-14 NPT 1"-11.5 NPT 3/4"-14 NPT 1-1/4"-11.5 NPT 1/2"-14 NPT 1-1/4"-11.5 NPT 3/4"-14 NPT 1-1/4"-11.5 NPT 1"-11.5 NPT 1-1/2"-11.5 NPT 1/2"-14 NPT 1-1/2"-11.5 NPT 3/4"-14 NPT 1-1/2"-11.5 NPT 1"-11.5 NPT 1-1/2"-11.5 NPT 1-1/4"-11.5 NPT 2"-11.5 NPT 1/2"-14 NPT 3/4"-14 NPT 3/4"-14 NPT 2"-11.5 NPT 1"-11.5 NPT 2"-11.5 NPT 1-1/4"-11.5 NPT 2"-11.5 NPT 1-1/2"-11.5 NPT 2-1/2"-8 NPT 1"-11.5 NPT 2-1/2"-8 NPT 1-1/4"-11.5 NPT 2-1/2"-8 NPT 1-1/2"-11.5 NPT 2-1/2"-8 NPT 2"-11.5 NPT 3"-8 NPT 1-1/4"-11.5 NPT 3"-8 NPT 1-1/2"-11.5 NPT 3"-8 NPT 2"-11.5 NPT 3"-8 NPT 2-1/2"-8 NPT 3-1/2"-8 NPT 1-1/2"-11.5 NPT 3-1/2"-8 NPT 2"-11.5 NPT 3-1/2"-8 NPT 2-1/2"-8 NPT 3-1/2"-8 NPT 3"-8 NPT 4"-8 NPT 2"-11.5 NPT 4"-8 NPT 2-1/2"-8 NPT 4"-8 NPT 3"-8 NPT 4"-8 NPT 3-1/2"-8 NPT C Length 3/4" 3/4" 3/4" 7/8" 7/8" 7/8" 15/16" 15/16" 15/16" 15/16" 15/16" 15/16" 15/16" 15/16" 15/16" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" D Diameter 1-1/16" 1-5/16" 1-5/16" 1-5/8" 1-5/8" 1-5/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-13/16" 2-13/16" 2-13/16" 2-13/16" 3-7/16" 3-7/16" 3-7/16" 3-7/16" 4" 4" 4" 4" 4-1/2" 4-1/2" 4-1/2" 4-1/2" Wt. Per/C 3 6 4 12 10 7 19 16 13 7 33 31 27 22 17 53 44 37 29 78 71 52 31 110 92 69 32 138 115 72 37 Other Configurations and Material Hazardous Locations in Steel Construction Ordinary Locations in Steel and Aluminum PG | 64 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Rigid Steel Chase Nipples Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CN - Rigid Threaded Chase Nipples Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** For use with Rigid Conduit Runs Use with a locknut to connect two boxes side by side or back to back. Use with a locknut to connect fixture housing to continuous runs Made in the USA Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts Smooth Fully Machined ID for EZ Burr-less Wire Pull CN Series is Rain Tight*** * Optional 105°c Throat Bushing TWICE the Strength and Durability of All Die Cast & Malleable Iron A B Machine Cut Threads Assure Tight & Right Fit Vibration Resistant C Cat # Trade Size A Length CN50 CN75 CN100 CN125 CN150 CN200 CN250 CN300 CN350 CN400 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 9/16" 5/8" 7/8" 15/16" 1" 1-1/16" 1-1/4" 1-1/4" 1-1/4" 1-1/4" Compliances: Certified Made in the USA UL 514B, 467 Concrete Tight and Rain Tight Suitable for Direct Burial NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 B Hex 15-16" 1-3/16" 1-9/16" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-1/2" 4-15/16" C Diameter Wt. Per/C 1" 1-1/4" 1-5/8" 1-7/8" 2-1/8" 2-5/8" 3-7/16" 4" 4-9/16" 5-1/8" 4 6 12 15 20 27 58 64 90 192 :Available OPTIONS: ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number *Insulated Throat Bushing - Option For this Option Add Suffix “B” to Above Cat Number *** When Used with a Sealing Washer - Product Series SW Compliment with our HDI LOCKnut and a Sealing Washer for Complete Environmental Protection and Full Bonding E101868 65 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Rigid Enlarger Fitting Adapter Since 1946 Industrial SPEC-grade Size Range: 1/2” - 1 1/2” Product Series: RCE - Rigid Threaded Enlargers Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** AMFICO rigid conduit enlarger fittings are designed to convert various conduit sizes to efficiently facilitate engineering and design specifications. Their use will eliminate the need for costly rework or tear outs of existing conduit installations. Guaranteed to fit tight and right with threaded RGS. Made in the USA One Piece Construction Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts Smooth Fully Machined ID for EZ Burr-less Wire Pull TWICE the Strength and Durability of All Die Cast & Malleable Iron A C HEX B Machine Cut Threads Assure Tight & Right Fit Vibration Resistant E D Part Number 'A' Male Thread 'B' Female Thread 'C' HEX 'D' Length 'E' Length RCE5075 RCE75100 RCE100125 RCE125150 1/2" NPS 3/4" NPS 1" NPS 1-1/4" NPS 3/4" NPS 1" NPS 1-1/4" NPS 1-1/2" NPS 1-3/16" 1-7/16" 1-13/16" 2" 1-3/32" 1-1/4" 1-3/8" 1-3/8" 15/32" 15/32" 5/8" 5/8" Compliances: Certified Made in the USA UL 514B, 467 Concrete Tight When Taped Suitable for Direct Burial NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 :Available OPTIONS: ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number E101868 66 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Steel Rigid Conduit to LT Since 1946 Size Range: 1/2” - 4” Product Series: STRFR - Rigid Threaded to Liquid Tight Conduit Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Industrial SPEC-grade Converts Flexible LT conduit to Rigid Steel Conduit Outdoor and Indoor Use with flexible metallic LT conduit or Type A flexible non-metallic LT conduit. Made in the USA Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts STRFR Series is Rain Tight Long Ferrule on LT End Provides Continual Ground and Stability Against Pull Out Split Conduit Coupling Rigid Theaded to Liquid Tight TWICE the Strength and Durability of Die Cast & Malleable Iron Products B A D E Rigid Threaded C Cat # STR38FR STR50FR STR75FR STR100FR STR125FR STR150FR STR200FR STR250FR STR300FR STR350FR STR400FR Compliances: Certified Made in the USA UL 514B, 467 Concrete Tight and Rain Tight Suitable for Direct Burial NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 Trade Size A Length 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-1/4" 1-1/4" 1-3/8" 1-1/2" 1-13/16" 2" 2-1/16" 2-7/8" 2-7/8" 2-7/8" 2-7/8" Liquid Tight D Diameter E Diameter Wt. Per/C 1-1/16" 1-1/8" 1-1/8" 1-1/8" 1-3/16" 1-3/16" 1-3/8" 1-7/16" 1-7/16" 1-11/16" 1-3/4" 1-3/4" 2-1/16" 2-3/16" 2-3/16" 2-5/16" 2-3/8" 2-3/8" 2-3/4" 2-7/8" 2-3/4" 3-1/4" 3-7/16" 3-7/16" 3-15/16" 4" 4" 4-7/16" 4-9/16" 4-9/16" 4-15/16" 5-1/8" 5-1/8" :Available OPTIONS: 1" 1-1/8" 1-3/8" 1-5/8" 2-1/16" 2-5/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" 11 13 18 31 51 64 83 153 175 222 247 B Hex C Hex ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Also Offered As: LT to EMT - Compression LT to FMC - FLX E101868 PG | 67 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Steel Rigid Conduit to LT Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: STRNT- Compression to Liquid Tight Conduit Rain Tight Option * Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Converts Flexible LT conduit to Rigid Steel Conduit Outdoor and Indoor Use with flexible metallic LT conduit or Type A flexible non-metallic LT conduit. Made in the USA Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts Long Ferrule on LT End Provides Continual Ground and Stability Against Pull Out Split Conduit Coupling Rigid Compression to Liquid Tight TWICE the Strength and Durability of Die Cast & Malleable Iron Products A C Hex Shown RT Version with Gold Toned Nuts -Suffix RT Bø Rigid Compression LT STRNT50 Trade Size 1/2" 1-11/16” 1-3/16” 1-1/8” Wt. Per/C 16 STRNT75 3/4" 2-1/4” 1-7/16" 1-3/8” 34 STRNT100 1" 2-9/16” 1-3/4” 1-11/16” 59 STRNT125 1-1/4" 3-3/16” 2-3/16” 2-1/16” 93 STRNT150 1-1/2" 3-9/16” 2-3/8” 2-5/16” 117 STRNT200 2" 3-5/8” 2-7/8” 2-3/4” 153 STRNT250 2-1/2" 5-3/16” 3-7/16" 3-1/4” 274 STRNT300 3" 5-5/16” 4” 3-15/16” 402 STRNT350 3-1/2" 5-5/16” 4-9/16” 4-7/16” 448 4" 5-3/8” 5-1/8” Cat # * STRNT400 A Bø C Hex 4-15/16” Available OPTIONS: Compliances: Certified Made in the USA UL 514B, 467 Concrete Tight and Rain Tight Suitable for Direct Burial NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 568 * Rain Tight (as shown) Option Add Suffix RT to Above Cat. Number ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Also Offered As: LT to Rigid - Threaded LT to EMT - Compression LT to FMC - FLX E101868 PG | AMFTGS.com 68 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Rigid Steel Comp.to FMC (flex) Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: FLXNT Rigid Conduit Compression* to Greenfield (FMC) Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Made in the USA SPEC Exceeds UL Pullout Requirements by 300% Unlike Diecast Products Will Not Crack or Deform Connector System Converts Rigid Conduit to FMC flex Conduit Compression Configuration Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts One Piece Construction No Need to Take Adapter Apart to Install Twists onto FMC without the use of a tool. A B D C F E Cat # TRADE SIZE A LENGTH B DEPTH C HEX D HEX E DIAMETER F DIAMETER FLEXNT50 FLEXNT75 FLEXNT100 FLEXNT125 FLEXNT150 FLEXNT200 FLEXNT250 FLEXNT300 FLEXNT350 FLEXNT400 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-15/16" 3-1/16" 3-1/2" 4-1/16" 4-9/16" 5-7/16" 5-3/4" 6-1/8" 6-1/8" 6-1/8" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-1/4" 1-1/4" 1-5/16" 1-5/16" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-5/16" 2-13/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" 1-1/8" 1-3/8"" 1-5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E101868 Available OPTIONS: * Rigid Set Screw Fitting to Flex Rigid Conduit Adapters to Flex Liquid Tight Conduit Adapters to Flex SPECflex Single Turn On Flex Connector Note: SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL off-shore conduit. Request a sample from factory to ensure capatibility. PG | 69 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Rigid Steel SS to FMC (flex) Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: FLXSNT Rigid Conduit Set Screw* to Greenfield (FMC) Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Made in the USA Exceeds UL Pullout Requirements by 300% Unlike Diecast Product Cannot Crack or Deform Rigid Side: 1/2” to 2” Furnished with 1 Screw 2-1/2” to 4” Furnished with 2 Screws SPEC Connector System Converts Rigid Conduit to FMC flex Conduit Set Screw Configuration Precision Machined from Solid Alloy Bar Stock One Piece Construction No Need to Take Adapter Apart to Install A Twists onto FMC without the use of a tool. B F E C D Cat # TRADE SIZE A LENGTH B DEPTH C HEX D HEX E DIAMETER F DIAMETER FLEXSNT50 FLEXSNT75 FLEXSNT100 FLEXSNT125 FLEXSNT150 FLEXSNT200 FLEXSNT250 FLEXSNT300 FLEXSNT350 FLEXSNT400 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-5/8" 2-11/16" 3" 3-11/16" 4-1/8" 4-15/16" 5" 5-1/8" 5-1/8" 5-1/8" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-1/4" 1-1/4" 1-5/16" 1-5/16" 1-1/8" 1-3/8" 1-5/8" 2-1/16" 2-5/16" 2-13/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 1-3/16" 1-7/16" 1-11/16" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" 1-1/8" 1-3/8" 1-5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E101868 Available OPTIONS: * Rigid Set Screw Fitting to Flex Rigid Conduit Adapters to Flex Liquid Tight Conduit Adapters to Flex SPECflex Single Turn On Flex Connector Note: SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL off-shore conduit. Request a sample from factory to ensure capatibility. PG | 70 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® True TIGHT Steel Locknuts Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AHLN True TIGHT Locknuts Material: Solid Alloy Steel Construction Precision Machined Tolerances Zinc Plated with Chromate Finish AMFICO AHLN Series Bonding Locknuts connect threaded Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with various options. Solve problems when connector or conduit thread lengths are taken up by thick metal or non-metallic enclosure walls. Twice the Strength & Durability of ALL Zinc Cast and Malleable Products Made in the USA Flat Hex Surfaces Provide a Area to Wrench for Full Torque Without Distortion or Cracking Distinctive Diamond Shaped Knurled Serrations Bite TIGHT & RIGHT Into All Metals & Finishes Will Not Vibrate Loose & Maintains Watertight Seal C A Style 1 AHLN Locknut Available with or without a Single Ground Screw on Locknut B CAT # TRADE SIZE AH50LN AH75LN AH100LN AH125LN AH150LN AH200LN AH250LN AH300LN AH350LN AH400LN 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" C A Style 2 AHLNGL Locknut with AL Lay-In Lug Lug can be field moved into 1 of 3 factory drilled threaded holes for EZ installation B CAT # TRADE SIZE AH50LN-GL AH75LN-GL AH100LN-GL AH125LN-GL AH150LN-GL AH200LN-GL AH250LN-GL AH300LN-GL AH350LN-GL AH400LN-GL 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" C DIAMETER 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" C A Style 3 AHLNGS Locknut with Tab with Ground Screw B A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS B LENGTH C DIAMETER 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" D LUG HEIGHT 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1/2” to 2” Lug #14-#4 2 1/2” to 4” #8-2/0 Other sizes available consult factory D CAT # TRADE SIZE AH50LN-GS AH75LN-GS AH100LN-GS AH125LN-GS AH150LN-GS AH200LN-GS AH250LN-GS AH300LN-GS AH350LN-GS AH400LN-GS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS B LENGTH C DIAMETER 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" D TAB LENGTH 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" Available OPTIONS: Copper Lugs and Aluminum Ground Lugs with Various Size Wire Capacity Options Available Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant UNSPSC 39121311 Galvanizing Plating Option: Add suffix “G” to cat # consult factory min.ord. qtys. apply Alternative Locknuts Product Series: LN Commerical Grade or LNHDI Heavy Duty Industrial Grade Ground Lugs are Manufactured from High Strength 6061-T6 Aluminum, and are Ideally Suited for Grounding and Bonding Applications Accommodating Both Copper and Aluminum Conductor Sizes #14 AWG to 250 KCMIL, UL486B Listed, AL9CU Rated, for Copper and Aluminum Conductor File # E258495 AMFTGS.com B LENGTH Can Accomodate a Ground Screw or Add Suffix SS to Cat # or Request Cat# AHLNSS from Factory. D PG | A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 71 AMERICAN FITTINGS Corporation ® Industrial Grade Locknuts Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: LN Industial Locknut Material: Steel Construction Zinc Plated LN Series LOCKnuts Used to Fasten Threaded Rigid or IMC Conduit or Fittings to Box, Apparatus or Enclosure. Made in the USA * except as noted below Precisioned Stamped with Cut Threads Industrial Grade Will Not Distort or Crack Under Load Stays Flat for Full Bonding to Box Tangs Bite Into Enclosure for Vibration Resistant A B Std Pkg. 2000 Wt. /c 1/2 Unit Carton 200 1 1.13 .13 LN75L 3/4 100 1000 2 1.38 .14 LN100L 1 50 500 4 1.72 .18 LN125L 1-1/4 50 500 7 2.06 .19 LN150L 1-1/2 25 250 8 2.38 .18 LN200L 2 25 250 9 2.89 .19 LN250 * 2 1/2 - 30 29 3.54 .39 LN300 * 3 - 25 42 4.23 .39 LN350 * 3 1/2 - 25 48 4.75 .39 LN400 * 4 - 25 52 5.29 .39 Cat. # * LN50L Trade Size “ Compliances: Certified Made in the USA * UL 514B NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 Aø B C Available OPTIONS: Heavy Duty Industrial Bonding Locknuts HDI Series Heavy Duty True Tight Grounding Locknuts AH Series Compliment with our Product Series SW Sealing Washers for Complete Environmental Protection. * 2-1/2” to 4” are not UL Listed and do not meet BAA or Made in USA. For tUse AMFICO HDI Series Locknuts Full Steel, UL, Made in USA AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 72 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Steel Heavy Duty Bonding Locknut Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: HDI Steel Bonding Locknut Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish HDI Series LOCKnuts Used to Fasten and Provide Bonding to Threaded Rigid or Imc Conduit to Box or Enclosure. Made in the USA Precisioned Machined from Alloy Steel Bar Stock Flat HEX Surfaces for Full Torque Values Without Damage to Threads or Locknut Will Not Distort and Stays Flat for Full Bonding to Box TWICE the Strength and Durability of Die Cast & Malleable Iron Products A Unique Diamond Beveled Face Grips Enclosure for Assured Bonding & Locking With VIBRATION PROOF Peformance B The Strongest and Finest Locknut Made Use When Inferior is Not an Option! Notched to Provide Solid Area To “Bump & Lock” Without Damage Unit Carton 1.13 .13 200 Std Pkg. 2000 LN 75HDI 3/4 1.39 .13 100 1000 4 LN100HDI 1 1.69 .17 50 500 6 LN125HDI 1 1/4 2.06 .17 50 500 14 LN150HDI 1 1/2 2.28 .17 25 250 17 LN200HDI 2 2.78 .17 250 9 LN250HDI 2 1/2 3.39 .25 25 - 30 36 LN300HDI 3 4.00 .25 25 55 LN350HDI 3 1/2 4.56 .25 - 25 25 LN400HDI 4 5.09 .25 - 25 101 Cat # LN 50HDI Trade Size ” 1/2 “A” Compliances: Certified Made in the USA UL 514B, 467 NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131700 “B” WT/100 2 Available OPTIONS: Standard Grade Locknuts Double Duty Hub Grade Bonding and Grounding Locknuts Compliment with our Product Series SW Sealing Washers for Complete Environmental Protection. E101868 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 73 AMERICAN FITTINGS Corporation ® True TIGHT Steel Locknuts Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AHLN True TIGHT Locknuts Material: Solid Alloy Steel Construction Precision Machined Tolerances Zinc Plated with Chromate Finish AMFICO AHLN Series Bonding Locknuts connect threaded Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with various options. Solve problems when connector or conduit thread lengths are taken up by thick metal or non-metallic enclosure walls. Twice the Strength & Durability of ALL Zinc Cast and Malleable Products Made in the USA Flat Hex Surfaces Provide a Area to Wrench for Full Torque Without Distortion or Cracking Distinctive Diamond Shaped Knurled Serrations Bite TIGHT & RIGHT Into All Metals & Finishes Will Not Vibrate Loose & Maintains Watertight Seal C A Style 1 AHLN Locknut Available with or without a Single Ground Screw on Locknut B CAT # TRADE SIZE AH50LN AH75LN AH100LN AH125LN AH150LN AH200LN AH250LN AH300LN AH350LN AH400LN 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" C A Style 2 AHLNGL Locknut with AL Lay-In Lug Lug can be field moved into 1 of 3 factory drilled threaded holes for EZ installation B CAT # TRADE SIZE AH50LN-GL AH75LN-GL AH100LN-GL AH125LN-GL AH150LN-GL AH200LN-GL AH250LN-GL AH300LN-GL AH350LN-GL AH400LN-GL 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" C A B 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS B LENGTH C DIAMETER 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" D LUG HEIGHT 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" CAT # TRADE SIZE AH50LN-GS AH75LN-GS AH100LN-GS AH125LN-GS AH150LN-GS AH200LN-GS AH250LN-GS AH300LN-GS AH350LN-GS AH400LN-GS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS B LENGTH C DIAMETER 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" D TAB LENGTH 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" Available OPTIONS: Copper Lugs and Aluminum Ground Lugs with Various Size Wire Capacity Options Available Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant UNSPSC 39121311 Galvanizing Plating Option: Add suffix “G” to cat # consult factory min.ord. qtys. apply Alternative Locknuts Product Series: LN Commerical Grade or LNHDI Heavy Duty Industrial Grade Ground Lugs are Manufactured from High Strength 6061-T6 Aluminum, and are Ideally Suited for Grounding and Bonding Applications Accommodating Both Copper and Aluminum Conductor Sizes #14 AWG to 250 KCMIL, UL486B Listed, AL9CU Rated, for Copper and Aluminum Conductor File # E258495 AMFTGS.com C DIAMETER 1/2” to 2” Lug #14-#4 2 1/2” to 4” #8-2/0 Other sizes available consult factory D PG | B LENGTH Can Accomodate a Ground Screw or Add Suffix SS to Cat # or Request Cat# AHLNSS from Factory. D Style 3 AHLNGS Locknut with Tab with Ground Screw A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 74 AMERICAN FITTINGS Corporation ® Sealing Gasket & Steel Retention Ring Size Range: 1/2” - 4” Product Series: AH MHW Series Sealing Gasket Assembly Material: Solid Alloy Steel Construction Retention Ring Zinc Plated with Chromate Finish Gasket HDPE Made in the USA Since 1946 Industrial SPEC-grade AH Series Sealing Gasket Assembly Used to Fasten and Provide Bonding and Sealing to an Enclosure. Sold as Single Assembly. For Use With: American Fittings AH Watertight Hubs, CG Cord Grips, and STG Liquid Tight Fittings Meets UL 514 B and NEMA FB-1 When Used in Conjuction with these American Fittings Product Groups Tested Liquid Tight NEMA 4X, and RainTight Washer Sits Deep In Retention Ring Sealing Gasket Retention Ring/Cup Washer A D Color Black E C B * Each Cat # includes 1 Sealing Gasket and 1 Retention Ring PG | B Inner Diameter 7/8" C Gasket Thickness 5/64" D Gasket Outer Diameter 1-1/8" E Total Thickness Assembly 1/8" MWH50 1/2" A Outer Diameter 1-1/4" MWH75 3/4" 1-7/16" 1-1/16" 5/64" 1-1/16" 1/8" MWH100 1" 1-11/16" 1-1/4" 5/64" 1-5/8" 1/8" MWH125 1-1/4" 2-1/16" 1-5/8" 5/64" 1-15/16" 1/8" MWH150 1-1/2" 2-5/16" 1-7/8" 5/64" 2-1/4" 1/8" MWH200 2" 2-3/4" 2-3/8" 5/64" 2-11/16" 1/8" MWH250 2-1/2" 3-7/16" 2-13/16" 5/32" 3-3/8" 3/16" MWH300 3" 4-3/16" 3-7/16" 5/32" 4-1/16" 3/16" MWH350 3-1/2" 4-11/16" 3-15/16" 5/32" 4-5/8" 3/16" MWH400 4" 5-3/16" 4-7/16" 5/32" 5-1/8" 3/16" Cat #* Trade Size 75 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Industrial Sealing Locknut & Gasket Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: SL Industial Sealing Locknut with Fused Molded Gasket Materials: Steel Construction with PVC Molded Gasket Zinc Plated Steel Locknut & PVC Sealing Gasket Provides Raintight Seal When Fastening Threaded Conduit to Non-threaded Entry In an Enclosure or Box. Can Be Used on Threaded Fittings for Environmental Seal. Made in the USA Only One Sealing Locknut is Required to: Functionally Replace Rigid Threaded Enclosure Connectors Provide Positive Ground Connection Provide Economies In Installation & Fitting Costs Features : Integrally Fused PVC Gasket Provides Positive Seal Against Water, Oils & Other Liquids Designed for Use with Watertight, Raintight & Oiltight Enclosures, NEMA 2, 3, 3r, 4 & 12 Can Be Used With Either Sheet Metal or Standard Cast Metal Boxes A Replaces All STG Style Sealing Rings 1 Piece Construction No Gasket Movement “ B” Thickness 1/2 Unit Carton 100 1 1.13 .13 SL2 3/4 100 1000 2 1.38 .14 SL3 1 50 500 4 1.72 .18 SL4 1-1/4 50 500 7 2.06 .19 SL5 1-1/2 25 250 8 2.38 .18 SL6 2 25 250 9 2.89 .19 SL7 * 2 1/2 - 30 29 3.54 .39 SL8 * 3 - 25 42 4.23 .39 SL9 * 3 1/2 - 10 48 4.75 .39 SL10 * 4 - 10 52 5.29 .39 Cat. # * SL1 Trade Size “ Compliances: Certified Made in the USA * UL 514B NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 Std Pkg. 1000 Wt. /c A B C Available OPTIONS: Heavy Duty Bonding Locknuts HDI Series Heavy Duty True Tight Grounding Locknuts AH Series LN Series of Industrial Grade Locknut . * 2-1/2” to 6” are not UL Listed and do not meet BAA or Made in USA. For tUse AMFICO HDI Series Locknuts Full Steel, UL, Made in USA AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 76 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Bushings Knockout Insulated Since 1946 Industrial SPEC-grade Size Range: 1/2” - 2 1/2 ” Product Series: KOS Non Metallic Insulated Bushings UL Rated 105ºC Flamability UL94V-2 Material: Nylon Dupont Zytel Color: Black Finish: As Molded KOS Series Bushings Insulated Snap In Converts Conduit and Box Rough Edge Holes to Smooth Neat Insulated Entries. Insulates and Mechanically Protects Wires and Cables. Snaps in Place with Tight Locking Fingers. Made in the USA Labor Saving Snap-in Design Does Not Require Any Special Tools for Installation. Locks in Place in Knockout Openings so Wires can be Pulled Through the Openings Without Loosening the Bushings. B A C Trade Size A ID ø B OD ø C Standard Carton Master Carton WT/ 100 NKB50 1/2” .750” .953” .406” 100 1000 1 NKB75 3/4” .812” 1.218” .406” 100 500 1 NKB100 1” 1.00” 1.468” .463” 50 500 1 NKB125 1 1/4” 1.38” 1.875” .463” 50 250 1 NKB150 1 1/2” 1.64” 2.125” .463” 25 125 2 NKB200 2” 1.96” 2.660” .700” 20 100 3 NKB250 2 1/2” 2.50” 3.200” .700” 10 50 4 Cat. # Compliances: Certified Made in the USA Meets UL 514B NEMA FB1 Federal Standard A-A-50553 RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 PG | Available OPTIONS: Plastic Threaded Insulated Bushings for Rigid Conduit Plastice Snap On Insulated Bushings for EMT 77 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Industrial Steel KO Reducing Washer Since 1946 Size Range: 1/2” - 4” Product Series: RW Industial Steel Knockout Reducing Washers Material: Steel Construction Zinc Plated Made in the USA Precisioned Stamped Industrial SPEC-grade RW Series Knockout Reducing Washers Used with Steel Boxes to Reduce the Knockout Size. AMFICO USA Reducing Washers Press Firmly Into Knockout, Providing a Secure Connection. UL Listed & Stamped Will Not Distor or Crack Under Load Stays Flat for Point On Placement Sizes Marked on Washer Cat # Trade Size RW7550 3/4” x 1/2” RW10050 1” x 1/2” RW10075 1” x 3/4” RW12550 1-1/4” x 1/2” RW12575 1-1/4” x 3/4” RW125100 1-1/4” x 1” RW15050 1-1/2” x 1/2” RW15075 1-1/2” x 3/4” RW150100 1-1/2” x 1” RW150125 1-1/2” x 1-1/4” RW20050 2” x 1/2” RW20075 2” x 3/4” RW200100 2” x 1” RW200125 2” x 1-1/4” RW200150 2” x 1-1/2” RW25050 2-1/2” x 1/2” RW25075 2-1/2” x 3/4” RW250100 2-1/2” x 1” RW250125 2-1/2” x 1-1/4” RW250150 2-1/2” x 1-1/2” RW250200 2-1/2” x 2” RW30050 3” x 1/2” RW30075 3” x 3/4” RW300100 3” x 1” RW300125 3” x 1-1/4” RW300150 3” x 1-1/2” RW300200 3” x 2” RW300250 3” x 2-1/2” PG | AMFTGS.com Carton Qty 200 100 100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 Master Wt. per/ Qty c 2000 1000 1000 1000 1000 1000 500 500 500 500 500 500 500 500 500 250 250 250 250 250 250 125 125 125 125 125 125 125 1 2 1 3 2 2 5 5 4 3 8 8 7 6 6 11 11 10 9 8 7 21 21 20 19 18 16 13 Cat # RW35050 RW35075 RW350100 RW350125 RW350150 RW350200 RW350250 RW350300 RW40050 RW40075 RW400100 RW400125 RW400150 RW400200 RW400250 RW400300 RW400350 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ Trade Size Carton Qty 3-1/2” x 1/2” 3-1/2” x 3/4” 3-1/2” x 1” 3-1/2” x 1-1/4” 3-1/2” x 1-1/2” 3-1/2” x 2” 3-1/2” x 2-1/2” 3-1/2” x 3” 4” x 1/2” 4” x 3/4” 4” x 1” 4” x 1-1/4” 4” x 1-1/2” 4” x 2” 4” x 2-1/2” 4” x 3” 4” x 3-1/2” 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Master Wt. per/ Qty c 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 35 35 34 32 31 28 24 18 43 2 41 40 38 35 1 25 20 Compliances: Certified Made in the USA UL Listed 514B NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31161809 e: info@amftgs.com Specifications Subject to Change Without Notice 78 AMERICAN FITTINGS Corporation ® Rigid Conduit One Hole Straps Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CSR - 1 Hole Rigid Conduit Strap Material: Steel Construction Bright Electro Zinc Plated CSR Series Steel RGS Straps AMFICO Steel One Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Alignment of Conduit is Quick and Easy. Made in the USA A C B Thickness .060” Cat # TRADE SIZE A LENGTH B HEIGHT C HOLE ID Unit Mstr. Wt. Ctn. Ctn. Per/C CSR501 CSR751 CSR1001 CSR1251 CSR1501 CSR2001 CSER2501 CSER3001 CSER3501 CSER4001 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-5/8" 1-7/8" 2-1/8" 2-3/4" 3" 3-3/4" 4-3/4" 5-3/8" 6" 6-1/2" 11/16" 15/16" 1-3/16" 1-1/2" 1-3/4" 2-3/16" 2-7/8" 3-1/2" 4" 4-1/2" 1/4" 1/4" 5/16" 3/8" 3/8" 7/16" 9/16" 9/16" 9/16" 9/16" 100 100 50 30 25 20 - Compliances: Certified Made in the USA Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31162310 - 1000 500 250 150 125 100 20 10 10 10 3 4 6 9 13 17 42 49 71 78 Available OPTIONS: 2 Hole Straps EMT and Rigid One-Hole BX Type Cat. # CSBX381 Unit Ctn Size 12-2, 12-3, 100 Std Pkg WT/ 100 1000 1 10-2, 10-3 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 79 AMERICAN FITTINGS Corporation ® Rigid Conduit Two Hole Straps Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CSR - 2 Hole Rigid Conduit Strap Material: Steel Construction Bright Electro Zinc Plated CSR Series RGS Steel Straps AMFICO Steel Two Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Alignment of Conduit is Quick and Easy. Made in the USA C B D A Cat # TRADE SIZE A LENGTH B HEIGHT CSR502 CSR752 CSR1002 CSR1252 CSR1502 CSR2002 CSER2502 CSER3002 CSER3502 CSER4002 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-1/4" 2-5/8" 3-1/4" 4" 4-1/4" 5-1/8" 5-7/8" 6-1/2" 7/1/8" 7-3/4" 13/16" 1-1/16" 1-5/16" 1-11/16" 1-7/8" 2-3/8" 2-7/8" 3-1/2" 4" 4-1/2" Compliances: Certified Made in the USA Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31162310 C HOLE ID 3/16" 3/16" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 7/16" 7/16" HOLE SPACING Wt. Per/C 1-13/16" 2-3/16" 2-9/16" 3-3/16" 3-3/8" 4-1/4" 5" 5-1/2" 6-3/16" 6-13/16" 2 3 5 7 12 15 17 23 26 33 Unit Mstr. Ctn. Ctn. 100 100 50 30 25 20 - 1000 500 250 150 125 75 20 10 10 10 Available OPTIONS: 1 Hole Straps EMT and Rigid One-Hole BX Type Cat. # CSBX381 Unit Ctn Size 12-2, 12-3, 100 Std Pkg WT/ 100 1000 1 10-2, 10-3 PG | 80 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT & Rigid Conduit Brace Since 1946 Industrial SPEC-grade A Complete Out of the Box Bracing or Conduit Sleeve Solution - “Just Add Your Conduit” Uni-BRACE ™ Wall Pentration Sleeve and Conduit Brace Fully Supports Conduit and Prohibits Conduit from Moving Integrated Alloy Steel Zinc Plated Escutcheon Plate Smooth ID & Rounded Edges Provides a Fast and Safe Wire Pull No Bushing Required RainTight Option Available Sealing Ring and Gasket Precision Machined Threads on Connector Body & Nut Patented Compression Ring 1” to 4” Compression Fittings Are Rated & Listed by UL for Use on Either EMT & Rigid Conduit Steel Construction, Zinc Plated, Chromate Compression Connector Flat Wrenching Surface, Accomodates Channel Lock to Wrench Secure No Need to Disassemble, Simply Loosen Nut and Slide on Conduit Once Tighted, Competely Braces and Secures Conduit from Forward, Backward & Lateral Movement Fully Machined ID to Assist and Provide a Fast & Easy Wire Pull NEVER a Burr or Edge Secures Conduit Against Wall or Structure While Fully Compressing on Conduit Low Profile, Modern Design to Blend with Conduit Single ByPass Wall Full Dual Bracing with 2 Units Precision Machined Steel Threads EZ-Torque™ Design Exploded View of Compression Feature Uni-BRACE ™ Locks Tight & Right, Can be Removed and Repositioned Use in Vertical Runs As a Floor or Ceiling Sleeve and Securing Conduit Use Two Units to Fully Brace Conduit On Both Multiple Pass Throughs Fully Secure and Brace Single Length or Extended Conduit Runs No Need to Thread Conduit Designed & Manufactured in the USA by AMERICAN FITTINGS Corporation Expand Your Runs Gain Bracing While Locking Your Conduit in Place 81 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT & Rigid Conduit Brace Since 1946 Industrial SPEC-grade Uni-BRACE ™ Wall Pentration Sleeve and Conduit Brace Size Range: 1” to 4 ” Alloy Steel Featuring: Connector Body & Compression Nut Machined from Solid Alloy Steel Bar Stock Zinc Plated with Chromate Finish *** 2-1/2 “ through 4” Compression Fittings are UL Listed & Approved for Both EMT & Rigid Conduit * EMT, Rigid and IMC Conduit * Flat Hex Surfaces for Full and EZ-Torque™ Fully Precisioned Machine Cut Threads Galvanized Plating Option Available ** Conduit Brace and Wall Sleeve Can Be Used for EMT and Rigid Conduit on Internal & External Walls, & Enclosure, Boxes Locks Your Conduit in Place on Single or Both Ends of Walls, Ceilings. or Floors Fully Supports and Braces Conduit Loads Provides Supports Where Straps and Hangers Cannot be Used Creates and Seals Entry Through Holes Provides a Finished Look to Conduit Run in Public Areas US Patented Design A Patented D B C E Save Time & Money No Need to Thread Rigid Conduit Provides Full Support and Bracing No Need to Cut Pipe for Pass-Through Walls, Run Full Lenght of Pipe CAT # Trade Size A Length B Hex ERCB100 ERCB200 ERCB250 ERCB300 ERCB350 ERCB400 1" * 2" * 2-1/2" 3" 3-1/2" 4" 1-1/16" 1-3/8" 1-5/16" 1-7/16" 1-7/16" 1-11/16" 1-7/16" 2-9/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" * 1” and 2” rated for EMT Compliances: D C Outer Diameter Diameter 1-1/2" 2-1/16" 2-11/16" 3-3/8" 3-3/8" 4" 4" 4-9/16" 4-9/16" 5-1/8" 5-1/16" 6-1/2" Only Consult Factory for Other Sizes E Brace Thickness 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" Wt. Per/C 18 45 60 78 80 183 Dimensions shown are + 1/16” - 1/32” *** Plating Options: Galvanized Plating Option: Add suffix “G” to cat #’ Certified Made in the USA Uni-BRACE™ Can Be Color Coded Compression Fittings Are UL Listed QUICKLY IDENTIFY CRITICAL SYSTEMS Acts as a Fire Stop When Used with UL Rated Fire Stop Putty Seal or Fire alarms, security systems, fiber optics, Conduit Wrap * high- and low-voltage circuits, data circuit with Rated Mil-STD 810 Sinusoidal Virbration Test Color Coded Uni-BRACE™ for Your Federal Standard A-A-50553 Thru-the-Wall Sleeves and Conduit Runs. Compression Fittings Comply to UL Standards: 514B, 467 CA Prop.65 Compliance * Fire Stop Ratings and Code Requirements are strictly left to the installer and design firm.. RoHS Compliant AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 82 83 Specification Grade Alloy Steel Made in the USA EMT 2020 EMT Electrical Fittings 1/2”- 4” Connectors & Couplings Set Screw & Compression RainTIGHT Fittings Color Coded Fittings Adapters to Convert EMT TO LT, Rigid, or FMC Ground Bushings Supports, Straps, Hangers Time to Think Beyond Government Projects! The Perfect Fitting to Decrease Your Labor Costs and Improve Your Installations Energy Projects, Data Centers, Hospitals, Infrastructure, & Industrial Facilities Trust One Name, AMERICAN Commerical & Industrial Fittings AMFICO Fitttings are Alloy Steel Construction with TWICE the Strength and Corrosion Resistance of Die Cast and Malleable Iron 84 AMERICAN FITTINGS Corporation ® 2020 EMT Fittings Catalog Since 1946 RETHINK AMERICAN Thought of as only a fittings source for Buy America projects, you should realize our full range of industrial fittings go WELL BEYOND government work. Infrastructure to food processing, being much easier to install and always surpassing application requirements, our fittings will outperform ALL others, as will our commitment to customer service. AMERICAN INTEGRITY OF MATERIALS AMERICAN FITTINGS’ products are manufactured from US manufactured hot rolled alloy steel bar stock. All materials are received from the mill with certified ASTM mill test reports . This ensures the integrity of raw material on All Raw Materials every fitting we manufacture. Fully Documented Alloy Steel Bar Stock AMERICAN CONSISTENCY OF PRODUCT If your conduit is rigid steel, why are you using inferior die cast or malleable iron fittings? Neither of these materials offers the uniformity of threads and compression, that our alloy steel provides. Our consistent centerlines provide precise alignment with enclosures and conduit. Environmental integrity and ease of installation are guaranteed with the manufacturing and machining tolerances provided. No fitting found worldwide can meet the quality of AMFICO. Precision Cutting & Machining of Every Part AMERICAN INNOVATION IN PRODUCT DESIGNS & ENGINEERING Reengineered Myers Hubs The BEST Erickson Made AMFICO Ground HUBS WaterTIGHT is a Guarantee We Provide 3 PIECE RIGID STEEL THREADED COUPLINGS Uniformity & Consistency of Centerlines Provides Dead Center Alignment on Enclosures & Conduit Space Saving Design in Steel & Aluminum Since 194 Installs Faster Than Any Other Product Rigid Conduit Fittings From Our Rigid Catalog REDUCING BUSHINGS Hazardous & Ordinary Locations Steel & Aluminum CONDUIT BUSHINGS Threaded - Non Threaded Steel & Aluminum Torque Tight and Right Numerous Grounding Options Ends Cross Threading Galvanized Plating Option For All Our Product Catalogs AMERICAN STRENGTH IS UNEQUALED See Inside Back Cover There is no way to get around the numbers, twice the strength of MI at a fraction of the weight. Alloy steel will outperform and outlast both die cast and malleable iron products. Alloy steel is not dependent on carbon for strength, and is naturally stronger with greater benefits in harsh conditions. Additive elements found in alloy steel make it NATURALLY corrosion resistant. Machined Alloy Steel [Ours] ASTM Physical Test Result Cast Malleable Iron [Theirs] ASTM Physical Test Result Zinc Die Cast (Zamack # 3 -7)[Theirs] ASTM Physical Test Result Tensile Strength (kpsi) 88 Tensile Strength (kpsi) 42 Tensile Strength (kpsi) 37 Yield Strength (kpsi) 70 Yield Strength (kpsi) 33 15 Elongation (% in 2”) 10 Yield Strength (kpsi) Elongation (% in 2”) 31 Elongation (% in 2”) Brinell Hardness 168 Brinell Hardness 102 ‐ 116 Brinell Hardness 13 80 85 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® 2020 EMT Fittings Catalog Since 1946 More Product Features and Benefits Than Any Fitting on the Market Guaranteed to Exceed Your Expectations Not Your Budget RainTIGHT Fittings Feature AMFICO Proprietary Internal Environmental Sealing Ring EMT & Rigid COMPRESSION Pages 1 - 2 Couplings & Connectors No Lazy Connections with Our EZ Torque Alloy Steel Flat Hex Compression Nuts Corrosion Resistant Alloy Steel is Industrial Grade Zinc Plating with Chromate Finish Speed Up Your Wire Pulls with Our Super Smooth ID’s for PRECISION MACHINED CUT THREADS Hardened Alloy Steel Threads Provide Full Torque Values Never “Cross-Thread” Another Fitting Secures Conduit with Less Labor EZ & FAST Wire Pulls Buy With Confidence: RT Series UL Listed RainTIGHT EMT Connectors & Couplings GUARANTEED DIMENSIONAL CONSISTENCY Precision Machined Alloy Steel Fittings Guaranteed Defect Free and Consistent From One Fitting to the Next Fittings are Exact-to-Size So Every Fitting Fits Perfectly Every Time Uniformed Surface Attaches Squarely to Boxes Hold Long Pipe Runs Straight and True 1/3 the Size & Weight of MI Fittings Pages 5 - 6 UL Listed and USA Stamped on Every Product EMT & Rigid SET SCREW Pages 3-4 Couplings & Connectors Set Screw Fittings Feature Steel Screws Deep Slots with HEX Heads Minimize Driver Slippage Get the Torque You Need Without EVER Cracking a Screw or a Fitting RT Series Connectors Furnished With Industrial Grade Sealing Ring and Steel Locknut (shown with optional insulated bushing) AMFICO SPECtrum- EMT / Rigid Color Coded Fittings Adapters Pages 11 - 12 EMT to Threaded Rigid Conduit Pages 7 - 8 Quick Identification of Your Critical Systems or Blend for Architectural Design Seal Tight to EMT FMC to EMT Pages 13 - 14 Wall Penetration Sleeve & Conduit Brace Secure Conduit Through a Ceiling, Roof, Floor Compression Connector with Flange Secures and Positions for Fire Stop Protection Pages 17 - 18 Full Catalog Part Number Index Pages 25 - 29 Couplings This Catalog Features Our Steel EMT Fittings Connectors Bushings Adapters Conduit Sleeves Straps/Hangers Other Full Line Catalogs Available Can be Found on the Last Page and Online at AMFTGS.com 86 AMERICAN FITTINGS Corporation ® EMT Steel Compression Connector Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: EC - EMT Compression Connector Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish ** Made in the USA Features: Full FLAT HEX Surface with EZ Torque Steel Compression Nut Torques Tight & Right Precision Machined Cut Threads UL Rated Concrete Tight Twice the Strength and Durability of ALL Die Cast and Malleable Products Compression Connector Above with Insulated Bushing A B C D Cat # TRADE SIZE A LENGTH B HEX C DIAMETER D THREAD LENGTH EC750US 1/2" 1-3/16" 15/16" 1" 3/8" 8 EC751US 3/4" 1-1/4" 1-3/16" 1-1/4" 7/16" 12 EC752US 1" 1-1/2" 1-7/16" 1-1/2" 7/16" 19 EC753US 1-1/4" 1-7/8" 1-13/16" 1-7/8" 1/2" 30 EC754US 1-1/2" 2-3/16" 2-1/16" 2-3/16" 9/16" 46 EC755US 2" 2-7/8" 2-9/16" 2-7/8" 5/8" 55 ERC250CONN (1) 2-1/2" 3-7/16" 3-1/4" 3-7/16" 1" 120 ERC300CONN (1) 3" 4" 3-15/16" 4" 1" 165 ERC350CONN (1) 3-1/2" 4-9/16" 4-7/16" 4-9/16" 1" 201 ERC400CONN (1) 4" 5-1/8" 4-15/16" 5-1/8" 1" 237 Wt. Per/C Furnished with a UL Listed Steel Locknut (1) 2 1/2” to 4” UL Listed and Rated for Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Compression Fittings Concrete Tight Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121434 AMFTGS.com Available OPTIONS: Factory Installed 105° UL Rating Insulated BushingFor this Option, Add Suffix B to Above Cat Number RainTight Configuration -”RT series” See Catalog Page ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Color Coded Painted (powder coated) Fittings- See Catalog Page *** Rain Tight Series Recommended for Direct Burial Requirements 87 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Steel Compression Coupling Since 1946 Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: EC - EMT Compression Coupling Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish ** Industrial SPEC-grade Made in the USA Features: Precision Machined Cut Threads UL Rated Concrete Tight Twice the Strength and Durability of ALL Die Cast and Malleable Products Compression Coupling A B C Full FLAT HEX Surface with EZ Torque Steel Compression Nuts Torques Tight & Right CAT # TRADE SIZE A LENGTH B HEX C DIAMETER Wt. Per/C EC760US 1/2" 1-3/8" 15/16" 1" 9 EC761US 3/4" 1-9/16" 1-3/16" 1-1/4" 13 EC762US 1" 1-5/8" 1-7/16" 1-1/2" 18 EC763US 1-1/4" 2" 1-13/16" 1-15/16" 29 EC764US 1-1/2" 2-1/4" 2-1/16" 2-3/16" 42 EC765US 2" 2-3/8" 2-9/16" 2-11/16" 61 ERC250CPLG (1) 2-1/2" 3-13/16" 3-1/4" 3-7/16" 127 ERC300CPLG (1) 3" 3-15/16" 3-15/16" 4" 167 ERC350CPLG (1) 3-1/2" 3-15/16" 4/7/16" 4-9/16" 204 ERC400CPLG (1) 4" 4" 4/15/16" 5-1/8" 235 (1) 2 1/2” to 4” UL Listed and Rated for Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Compression Fittings Concrete Tight Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121434 AMFTGS.com Available OPTIONS: RainTight Configuration - ”RT series” See Catalog Page ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number Color Coded Painted (powder coated) Fittings - See Catalog Page *** Rain Tight Series Recommended for Direct Burial Requirements 88 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT RT Compression EMT Steel Rain Tight Connectors Since 1946 Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Industrial SPEC-grade Product Series: ECRT EMT Rain Tight Compression Connector Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Compression Nut Plated Gold Tone for Made in the USA EZ Inspection and Identification Features: Guaranteed Rain Tight Precision Machined Cut Threads Full FLAT HEX Surface for AMFICO EZ Torque Solid Steel Compression Nut EZ Torque Steel Compression Nut Rain Tight Nuts Plated Gold Tone Torques Tight & Right UL Rated Concrete Tight Twice the Strength and Durability of ALL Die Cast and Malleable Products Rain Tight Compression Connector Above Shown with Optional Insulated Bushing A B C D TRADE SIZE A LENGTH B HEX C DIAMETER D THREAD LENGTH Wt. Per/C EC750US RT 1/2" 1-3/16" 15/16" 1" 3/8" 8 EC751US RT 3/4" 1-1/4" 1-3/16" 1-1/4" 7/16" 12 EC752US RT 1" 1-1/2" 1-7/16" 1-1/2" 7/16" 19 EC753US RT 1-1/4" 1-7/8" 1-13/16" 1-7/8" 1/2" 30 EC754US RT 1-1/2" 2-3/16" 2-1/16" 2-3/16" 9/16" 46 EC755US RT 2" 2-7/8" 2-9/16" 2-7/8" 5/8" 55 ERC250CONN RT (1) 2-1/2" 3-7/16" 3-1/4" 3-7/16" 1" 120 ERC300CONN RT (1) 3" 4" 3-15/16" 4" 1" 165 ERC350CONN RT (1) 3-1/2" 4-9/16" 4-7/16" 4-9/16" 1" 201 ERC400CONN RT (1) 4" 5-1/8" 4-15/16" 5-1/8" 1" 237 Cat # Furnished with UL Listed Steel Locknut and Rain Tight Sealing Ring (1) 2 1/2” to 4” UL Listed and Rated for Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Compression Fittings Concrete Tight Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121434 AMFTGS.com Available OPTIONS: Factory Installed 105° UL Rating Insulated BushingFor this Option, Add Suffix B to Above Cat Number ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number *** Rain Tight Series Recommended for Direct Burial Requirements 89 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Steel Rain Tight Couplings Since 1946 Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Industrial SPEC-grade Product Series: ECRT EMT Rain Tight Compression Coupling Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish ** Compression Nut Plated Gold Tone for Made in the USA EZ Inspection and Identification Features: Guaranteed Rain Tight Precision Machined Cut Threads AMFICO EZ Torque Solid Steel Compression Nuts Rain Tight Nuts Plated Gold Tone UL Rated Concrete Tight Twice the Strength and Durability of ALL Die Cast and Malleable Products Rain Tight Compression Coupling A B C Full FLAT HEX Surface for EZ Torque Steel Compression Nuts Torques Tight & Right TRADE SIZE A LENGTH B HEX C DIAMETER Wt. Per/C EC760US RT 1/2" 1-3/8" 15/16" 1" 9 EC761US RT 3/4" 1-9/16" 1-3/16" 1-1/4" 13 EC762US RT 1" 1-5/8" 1-7/16" 1-1/2" 18 EC763US RT 1-1/4" 2" 1-13/16" 1-15/16" 29 EC764US RT 1-1/2" 2-1/4" 2-1/16" 2-3/16" 42 EC765US RT 2" 2-3/8" 2-9/16" 2-11/16" 61 ERC250CPLG RT (1) 2-1/2" 3-13/16" 3-1/4" 3-7/16" 127 ERC300CPLG RT (1) 3" 3-15/16" 3-15/16" 4" 167 ERC350CPLG RT (1) 3-1/2" 3-15/16" 4/7/16" 4-9/16" 204 ERC400CPLG RT (1) 4" 4" 4/15/16" 5-1/8" 235 CAT # (1) 2 1/2” to 4” UL Listed and Rated for Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Compression Fittings Concrete Tight Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121434 AMFTGS.com Available OPTIONS: ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number *** Rain Tight Series Recommended for Direct Burial Requirements 90 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT RT Compression EMT Steel Compression Color Coded Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: EC - EMT Compression Connector Material: Solid Alloy Steel Construction Powder Coated Made in the USA Fire alarms, security systems, fiber optics, high- and lowvoltage circuits, data circuits: without a system, trying to tell their wires apart can be tricky. Color coded fittings makes it easy. Contractors avoid the hassels of spray painting and taping. C HEX C HEX SPECtrum Steel EMT FITTINGS B B Powder Coating Will Not Flake or Crack. Steel Fitting Twice the Durability of Casr Products. Color Coded Power Coated AMFICO EMT fittings consists of set screw, compression, insulated and non-insulated. A While red is the most commonly used, other colors offered include white, blue, green, yellow, black, and orange. * Connector Furnished with a Steel Locknut Connectors Trade Cat#* Size” A A B C Wt./c Couplings Trade Cat# Size” A B C Wt./c EC750US-R 1/2" 1-1/8" 1" 15/16" 8 EC760US-R 1/2" 1-3/8" 1" 15/16" 8 EC751US-R 3/4" 1-3/16" 1-7/32" 1-3/16" 12 EC761US-R 3/4" 1-7/16" 1-7/32" 1-3/16" 13 EC752US-R 1 1-5/16" 1-1/2" 1-7/16" 19 EC762US-R 1 1-17/32" 1-1/2" 1-7/16" 19 EC753US-R 1-1/4" 1-9/16" 1-7/8" 1-13/16" 30 EC763US-R 1-1/4" 1-27/32" 1-7/8" 1-13/16" 30 EC754US-R 1-1/2" 1-11/16" 2-5/32" 2-1/16" 46 EC764US-R 1-1/2" 2-1/16" 2-5/32" 2-1/16" 46 1-7/8" 2-7/8" 2-9/16" 55 EC765US-R 3-1/8" 3-13/32" 3-1/4" 120 EC755US-R 2" ERC250CONN-R 2-1/2" ERC300CONN-R 3" ERC350CONN-R 3-1/2" ERC400CONN-R 4" 3-1/16" 4" 3-29/32" 3-1/16" 4-9/16" 4-13/32" 3-1/16" 5-3/32" 4-29/32" 2" 2-1/4" 2-7/8" 2-9/16" 60 2-1/2" 3-5/8" 3-13/32" 3-1/4" 133 4" 3-29/32" 171 4-9/16" 4-13/32" 205 5-3/32" 4-29/32" 238 ERC250CPLG-R 3-11/16" ERC300CPLG-R 3" 201 ERC350CPLG-R 3-1/2" 3-19/32" 237 ERC400CPLG-R 4" 3-5/8" 165 Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121434 Features and Options: Solid Alloy Steel Construction, Precision Machined Connector Furnished with Steel LocknutOptional: Insulated Throat Bushing Available - Add Suffix “B” * Color Options Available (minimum qtys may apply): Remove Suffix “R” from Cat # and Add Suffix: -O Orange Fiber Optics Circuits -Y Yellow High Voltage Wiring - BL Blue Low Voltage Wiring Data Com - BK Black Architectural Design -G Green Hospitals & Healthcare Critical Equipment -W White Architectural Design E101868 AMFTGS.com 91 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Steel Set Screw Connector Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: SS - EMT Set Screw Connector Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish Made in the USA Features: Precision Machined Body and Scew Holes Fully Avoids Cracking or Distortion from Tightening Set Screws AMFICO EZ Torque Tri-Head Steel Screws Will Not Crack, Vibration Resistant May be Installed Using Slotted, Phillips or Robertson Driver UL Rated Concrete Tight When Taped Set Screw Connector Available with an Insulated Bushing* Twice the Strength and Durability of ALL Die Cast and Malleable Products B D D B C C Furnished with a UL Listed Steel Locknut A A 1/2” thru 2” have one set screw per end 2 1/2” thru 4” have two set screws per end Recommended Torque 160-200 in-lb Cat # TRADE SIZE A LENGTH B HEX C DIAMETER D DIAMETER Wt. Per/C SS50US 1/2" 1-1/4" 15/16" 1" 9/16" 10 SS51US 3/4" 1-1/4" 1-3/16" 1-1/4" 13/16" 13 SS52US 1" 1-9/16" 1-7/16" 1-1/2" 1-1/16" 21 SS53US 1-1/4" 1-3/4" 1-13/16" 1-7/8" 1-3/8" 33 SS54US 1-1/2" 2" 2-1/16" 2-3/16" 1-9/16" 46 SS55US 2" 2" 2-9/16" 2-11/16" 2" 62 ERS250CONN (1) 2-1/2" 2-1/2" 3-1/4" 3-7/16" 2-7/16" 117 ERS300CONN (1) 3" 2-9/16" 3-15/16" 4" 3" 167 ERS350CONN (1) 3-1/2" 2-9/16" 4-7/16" 4-9/16" 3-1/2" 206 ERS400CONN (1) 4" 2-9/16" 4-15/16" 5-1/8" 3-15/16" 247 (1) 2 1/2” to 4” are UL Listed & Approved for use on BOTH EMT & Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Set Screw Fittings Concrete Tight When Taped NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121434 Available OPTIONS: * Factory Installed 105° UL Rating Insulated BushingFor this Option, Add Suffix B to Above Cat Number Color Coded Painted (powder coated) Fittings- See Catalog Page E101868 92 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Steel Set Screw Coupling Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: SS - EMT Set Screw Coupling Material: Solid Alloy Steel Construction Zinc Plated with a Chromate Finish Made in the USA Features: Precision Machined Steel Body and Threaded Screw Holes Fully Avoids Cracking or Distortion from Tightening Set Screws AMFICO EZ Torque Tri-Head Steel Screws Will Not Crack, Vibration Resistant May be Installed Using Slotted, Phillips or Robertson Driver UL Rated Concrete Tight When Taped Twice the Strength and Durability of ALL Die Cast and Malleable Products B B C D Set Screw Coupling C 1/2” thru 2” have one set screw per end 2 1/2” thru 4” have two set screws per end Recommended Torque 160-200 in-lb A Cat # A TRADE SIZE A LENGTH B HEX C DIAMETER D DIAMETER Wt. Per/C SS60US 1/2" 1-1/2" 7/8" 7/8" 11/16" 8 SS61US 3/4" 1-1/2" 1-1/16" 1-1/8" 7/8" 10 SS62US 1" 1-7/8" 1-3/8" 1-3/8" 1-1/8" 20 SS63US 1-1/4" 2-3/16" 1-11/16" 1-3/4" 1-1/2" 29 SS64US 1-1/2" 2-5/8" 1-15/16" 2-1/16" 1-11/16" 42 SS65US 2" 2-11/16" 2-7/16" 2-1/2" 2-1/8" 54 ERS250CPLG (1) 2-1/2" 2-9/16" 3-1/4" 3-7/16" 2-13/16" 108 ERS300CPLG (1) 3" 2-5/8" 3-15/16" 4" 3-7/16" 129 ERS350CPLG (1) 3-1/2" 2-5/8" 4/7/16" 4-9/16" 3-15/16" 154 ERS400CPLG (1) 4" 2-5/8" 4-15/16" 5-1/8" 4-7/16" 172 (1) 2 1/2” to 4” are UL Listed & Approved for use on BOTH EMT & Rigid Conduit. Product is stamped accordingly. Compliances: Certified Made in the USA UL 514B, 467 Set Screw Fittings Concrete Tight When Taped NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121434 Available OPTIONS: Color Coded Painted (powder coated) Fittings - See Catalog Page E101868 93 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Steel Set Screw Color Coded Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” 2 1/2” thru 4” are UL Listed & Approved for Use on Both EMT & Rigid Product Series: SS - EMT Color Coded Compression Fittings Material: Solid Alloy Steel Construction Powder Coated Made in the USA Fire alarms, security systems, fiber optics, high- and lowvoltage circuits, data circuits: without a system, trying to tell their wires apart can be tricky. Color coded fittings makes it easy. Contractors avoid the hassels of spray painting and taping. C HEX C HEX SPECtrum Steel EMT FITTINGS B B 2 1/2” & Larger are Furnished with 2 Set Hex Screws Per End Powder Coating Will Not Flake or Crack. Steel Fitting Twice the Durability of Cast Products. A Cat#* Couplings Trade Size” A While red is the most commonly used, other colors offered include white, blue, green, yellow, black, and orange. * Connector Furnished with a Steel Locknut Connectors Color Coded Power Coated AMFICO EMT fittings consists of set screw, compression, insulated and non-insulated. A B C Wt./c Cat# Trade Size” A B C Wt./c SS50US-R 1/2" 1-5/32" 63/64" 15/16" 10 SS60US-R 1/2" 1-1/2" 7/8" 27/32" 10 SS51US-R 3/4" 1-3/16" 1-7/32" 1-11/64" 14 SS61US-R 3/4" 1-1/2" 1-1/8" 1-1/16" 15 SS52US-R 1” 1-1/2" 1-1/2" 1-7/16" 23 SS62US-R 1 1-7/8" 1-11/32" 1-13/32" 24 SS53US-R 1-1/4" 1-11/16" 2-7/8" 1-13/16" 40 SS63US-R 1-1/4" 2-3/16" 1-3/4" 1-11/16" 44 SS54US-R 1-1/2" 1-29/32" 2-5/32" 2-1/16" 52 SS64US-R 1-1/2" 2-19/32" 2-1/32" 1-31/32" 68 2-11/16" 2-1/2" 2-13/32" 90 SS55US-R 2" 2-29/32" ERS250CONN-R 2-1/2" 2-3/8" 2-21/32" 3-13/32" 2-9/16" 3-1/4" 80 SS65US-R 2" 116 ERS250CPLG-R 2-1/2" 2-17/32" 3-1/4" 113 2-5/8" 4" 3-29/32" 127 210 ERS350CPLG-R 3-1/2" 2-5/8" 4-9/16" 4-13/32" 156 240 ERS400CPLG-R 2-5/8" 5-3/32" 4-29/32" 172 ERS300CONN-R 3" 2-7/16" 4" 3-29/32" 160 ERS300CPLG-R ERS350CONN-R 3-1/2" 2-7/16" 4-9/16" 4-13/32" ERS400CONN-R 4" 2-7/16" 5-3/32" 4-29/32" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121434 3" 4" 3-13/32" Features and Options: Solid Alloy Steel Construction, Precision Machined Connector Furnished with Steel Locknut Optional: Insulated Throat Bushing Available - Add Suffix “B” * Color Options Available (minimum qtys may apply): Remove Suffix “R” from Cat # and Add Suffix: -O Orange Fiber Optics Circuits -Y Yellow High Voltage Wiring - BL Blue Low Voltage Wiring Data Com - BK Black Architectural Design -G Green Hospitals & Healthcare Critical Equipment -W White Architectural Design E101868 AMFTGS.com 94 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Set Screw Ground Bushing w/Lug Since 1946 Size Range: 1/2” - 4” Industrial SPEC-grade For Use On EMT, and NT Rigid/imc Conduit to Product Series: GBNT GL No Threads (NT)Grounding Bushings Provide a Means of Grounding Conduit Through an Furnished with Factory Installed Lay In Grounding Lug* Insulated Bushing. Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Suitable for EMT, RGS and IMC Conduit Made in the USA Solid Steel Construction with Factory Installed Insulator Precison Cut Machined Threads Flat Hex Surface for Full Torque Values Insulator Throat Bushing Prevents Damage to Wire 3 Thr’d Machined Holes to Accoodate Lug Orientation Fully Machined ID for EZ Pull of Wires Twice the Strength and Durability of Die Cast & Malleable Iron 120° 120° 3 x Threaded Holes At 120 EZ Installation & Wiring Move Lug to Avoid Interference and Speed Wiring Steel Set Screws in Machined Threaded Holes Vibration Resistant D C Wire Tightening Set Screw B 3 x Threaded Holes At 120 Cat # GB50BNTGL GB75BNTGL GB75BNTGL-0 GB100BNTGL GB100BNTGL-0 GB125BNTGL GB125BNTGL-0 GB150BNTGL GB150BNTGL-0 GB200BNTGL GB200BNTGL-0 GB250BNTGL GB250BNTGL-250 GB300BNTGL GB300BNTGL-250 GB350BNTGL GB350BNTGL-250 GB400BNTGL GB400BNTGL-250 No Threads Trade Size 1/2" 3/4" 3/4" 1" 1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2" 2-1/2" 2-1/2" 3" 3" 3-1/2" 3-1/2" 4" 4" 2 x Set-Screws: 1 - For Mounting The Lug 1 - For Bonding To Conduit A A 1-1/16" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-7/8" 1-7/8" 2-1/16" 2-1/16" 2-11/16" 2-11/16" 3-7/16" 3-7/16" 4" 4" 4-1/2" 4-1/2" 5-1/8" 5-1/8" B C D 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 1-1/16" 3/4" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 3/4" 1-1/8" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-3/16" 1-11/16" 1-5/16" 1-3/8" 1-11/16" 1-1/2" 1-7/8" 1-11/16" 2-1/16" 1-13/16" 2-1/8" 2-1/6" 2-3/8" 2-13/16" 3-3/8" 3-1/8" 3-11/16" 3-3/8" 3-15/16" 3-15/16" 4-3/16" Compliances: Certified Made in the USA UL 514B, 467 Insulated Throat Bushing is UL Listed & 150° Rated NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 Wire Range Wt. Min Solid Max Strand Per/C #14 #4 7 #14 #4 7 #8 #1/0 15 #14 #4 9 #8 #1/0 17 #14 #4 15 #8 #1/0 22 #14 #4 16 #8 #1/0 24 #14 #4 20 #8 #1/0 28 #14 #1/0 63 #6 250 MCM 78 #14 #1/0 75 #6 250 MCM 90 #14 #1/0 92 #6 250 MCM 105 #14 #1/0 96 #6 250 MCM 113 Available OPTIONS: Aluminum Construction for Aluminum Conduit Add Suffix AL to Cat # * Grounding Lug Options Copper Lug Add Suffix CU to Cat #’s Consult Factory for Tin Plated Aluminum Lugs If No Ground Lug is Required, Refer to Cat # RCB ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number E101868 95 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Set Screw Steel Bushings Since 1946 Size Range: 1/2” - 4” Industrial SPEC-grade For Use On EMT, and NT Rigid/imc Conduit to Product Series: RCBNT Grounding Bonding Bushings No Threads Provide a Means of Grounding Threaded Conduit Furnished without Ground Lug* Through an Insulated Bushing. Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Suitable for EMT, RGS and IMC Conduit Made in the USA Furnished with Factory Installed Insulated Throat Bushing UL Listed 150 deg. C Fully Machined ID for EZ Pull of Wire and Provides Protection for Wires No Threads Twice the Strength and Durability of Die Cast & Malleable Iron D A Set Screw Steel Set Screws in Machined Threaded Holes Vibration Resistant Insulator B Hex C Set Screws: 1/2” - 2” furnished with 1 set screw 2 1/2” - 4” furnished with 2 set screws Cat # Trade Size RCB 50BNT 1/2" A B (Hex) C 1-1/8 1-1/16 9/16 D Wt. Per/C 11/16 5 RCB 75BNT 3/4" 1-1/4 1-3/16 3/4 11/16 5 RCB100BNT 1" 1-1/2 1-7/16 1 13/16 7 RCB125BNT 1-1/4" 1-7/8 1-13/16 1-1/4 7/8 12 RCB150BNT 1-1/2" 2-3/16 2-1/16 1-1/2 7/8 14 RCB200BNT 2" 2-11/16 2-9/16 1-15/16 7/8 18 RCB250BNT 2-1/2" 3-7/16 3-1/4 2-1/4 1-1/16 58 RCB300BNT 3" 4 3-15/16 2-7/8 1-1/16 70 RCB350BNT 3-1/2" 4-9/16 4-7/16 3-1/4 1-1/16 85 RCB400BNT 4" 5-1/8 4-15/16 3-3/4 1-1/16 93 Compliances: Certified Made in the USA UL 514B, 467 Insulated Throat Bushing is UL Listed & 150° Rated NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 Available OPTIONS Aluminum Construction for Aluminum Conduit Add Suffix AL to Cat # * If Ground Lug is Required, REFER to Cat # GB Series\ GB Series Available Threaded (Rigid) and NT (EMT and Rigid) **Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number E101868 96 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Steel EMT to Rigid Conduit Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: ETR - EMT Compression to Rigid Threaded Conduit Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Made in the USA TWICE the Strength and Durability of Die Cast & Malleable Iron Products Split Coupling EMT Compression to Threaded Rigid Conduit C EMT Compression Rigid Threaded Converts EMT to Rigid or IMC conduit EMT compression coupling one end, rigid threaded coupling other end. B HEX A HEX Cat. # Trade Size Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts 1/2 the Weight of Malleable Iron Fittings Type A - hex B - hex C Length Unit Ctn Std Ctn WT/ 100 ETR50 1/2" STANDARD 15/16 15/16 1-1/4 25 250 11 ETR50RT 1/2" RAINTIGHT 15/16 15/16 1-1/4 25 250 11 ETR75 3/4" STANDARD 1-11/64 1-9/32 1-9/32 10 100 16 ETR75RT 3/4" RAINTIGHT 1-11/64 1-9/32 1-9/32 10 100 16 ETR100 1" STANDARD 1-7/16 1-9/16 5 50 26 1" RAINTIGHT 1-7/16 1-9/16 1-15/32 1-15/32 5 50 26 ETR125 1-1/4" STANDARD 1-13/16 1-13/16 1-9/16 5 50 31 ETR125RT 1-1/4" RAINTIGHT 1-13/16 1-13/16 1-9/16 5 50 31 ETR150 1-1/2" STANDARD 2-1/16 2-1/16 1-25/32 5 25 41 ETR150RT 1-1/2" ETR100RT RAINTIGHT 2-1/16 2-1/16 1-25/32 5 25 41 ETR200 2" STANDARD 2-9/16 2-9/16 1-7/8 5 25 61 ETR200RT 2" RAINTIGHT 2-9/16 2-9/16 1-7/8 5 25 61 ETR250 2-1/2" STANDARD 5 150 RAINTIGHT 3-1/4 3-1/4 - 2-1/2" 3-1/4 3-1/4 2-25/32 ETR250RT 2-25/32 - 5 150 ETR300 3" STANDARD 3-29/32 3-29/32 2-25/32 - 5 194 ETR300RT 3" RAINTIGHT 3-29/32 3-29/32 2-25/32 - 5 194 ETR350 3-1/2" STANDARD 4-13/32 4-13/32 2-25/32 - 4 240 ETR350RT 3-1/2" RAINTIGHT 4-13/32 4-13/32 2-25/32 - 4 240 ETR400 4" 4-29/32 2-25/32 - 2 300 4" STANDARD RAINTIGHT 4-29/32 ETR400RT 4-29/32 4-29/32 2-25/32 - 2 300 Compliances: Certified Made in the USA UL 514B, 467 Compression Fittings Concrete Tight Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39131707 AMFTGS.com :Available OPTIONS: ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number *** Rain Tight RT Series Recommended for Direct Burial Requirements 97 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Steel EMT to LT Conduit Since 1946 Industrial SPEC-grade Size Range: 1/2” -4” Product Series: STREMT - EMT Compression to Liquid Tight Conduit Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish ** Made in the USA TWICE the Strength and Durability of Die Cast & Malleable Iron Products Split Coupling EMT Compression to Liquid Tight Conduit C1 HEX A Converts Flexible LT conduit to EMT Conduit Outdoor and Indoor Use with flexible metallic LT conduit or type B flexible non-metallic LT conduit. B2 C2 HEX B1 EMT Compression Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts Long Ferrule on LT End Provides Continual Ground and Stability Against Pull Out Liquid Tight Rain Tight Option - RT Cat #’s Cat # STREMT 50 STREMT 75 STREMT100 STREMT125 STREMT150 STREMT200 STREMT250 STREMT300 STREMT350 STREMT400 STREMT 50RT STREMT 75RT STREMT100RT STREMT125RT STREMT150RT STREMT200RT STREMT250RT STREMT300RT STREMT350RT STREMT400RT Trade Size A Length B1 Diameter B2 Diameter C1 Hex C2 Hex 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-9/16" 1-11/16" 1-13/16" 2-3/4" 3-3/16" 3-3/8" 4-11/16" 4-7/8" 6-1/8" 6-3/8" 1-9/16" 1-11/16" 1-13/16" 2-3/4" 3-3/16" 3-3/8" 4-11/16" 4-7/8" 6-1/8" 6-3/8" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" 1" 1-1/4" 1-1/2" 1-7/8" 2-3/16" 2-7/8" 3-3/8" 4" 4-9/16" 5-1/8" 1" 1-1/4" 1-1/2" 1-7/8" 2-3/16" 2-7/8" 3-3/8" 4" 4-9/16" 5-1/8" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-5/16" 2-3/4" 3-5/16" 3-15/16" 4-7/16" 5" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-5/16" 2-3/4" 3-5/16" 3-15/16" 4-7/16" 5" 15/16" 1-3/16" 1-7/16" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 15/16" 1-3/16" 1-7/16" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" Compliances: Certified Made in the USA UL 514B, 467 Compression Fittings Concrete Tight Suitable for Direct Burial *** NEMA Standard FB1 Federal Standard A-A-50553 Certified for MIL-STD 810 Sinusoidal Vibrations CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39131707 AMFTGS.com :Available OPTIONS: ** Galvanized Plating - Option For this Option, Add Suffix “G” to Above Cat Number *** Rain Tight RT Series Recommended for Direct Burial Requirements Also Offered As: LT to Rigid Conduit - Compression LT to Rigid Conduit - Threaded LT to FMC - FLX 98 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter EMT Steel SS to FMC (flex) Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” EMT Set Screw* to Flex Adapter Product Series: FLXSS EMT Set Screw to Greenfield (FMC) Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Made in the USA Exceeds UL Pullout Requirements by 300% Unlike Diecast Product Cannot Crack or Deform C EMT Side: 1/2” to 2” Furnished with 1 Screw 2-1/2” to 4” Furnished with 2 Screws Converts EMT Conduit to FMC flex Conduit Set Screw Configuration Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts One Piece Construction No Need to Take Adapter Apart to Install Twists onto FMC without the use of a tool. SPEC Connector System A B C Cat # FLEXSS50 FLEXSS75 FLEXSS100 FLEXSS125 FLEXSS150 FLEXSS200 FLEXSS250 FLEXSS300 FLEXSS350 FLEXSS400 F D E TRADE SIZE A LENGTH B DEPTH C HEX D HEX E E DIAMETER F DIAMETER 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-5/8" 3" 3-13/16" 3-9/16" 4-1/8" 5-1/8" 5-1/8" 5-1/4" 5-1/4" 5-1/4" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-5/16" 1-1/4" 1-5/16" 1-5/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 7/8" 1-1/16" 1-3/8" 1-3/4" 2-1/16" 2-1/2" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-1/8" 1-3/8" 1-5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" 7/8" 1-1/8" 1-3/8" 1-3/4" 2-1/16" 2-1/2" 3-7/16" 4" 4-9/16" 5-1/8" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E101868 Available OPTIONS: * EMT Compression Fitting to Flex Rigid Conduit Adapters to Flex Liquid Tight Conduit Adapters to Flex SPECflex Single Turn On Flex Connector Note: SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL off-shore conduit. Request a sample from factory to ensure capatibility. 99 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter EMT Steel Comp. to FMC (flex) Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: FLXEMT EMT Compression* to Greenfield (FMC) Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Made in the USA Exceeds UL Pullout Requirements by 300% Unlike Diecast Product Cannot Crack or Deform SPEC Connector System Converts EMT Conduit to FMC flex Conduit Compression Configuration One Piece Construction No Need to Take Adapter Apart to Install Twists onto FMC without the use of a tool. Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts A B F C E D Cat # FLEXEMT50 FLEXEMT75 FLEXEMT100 FLEXEMT125 FLEXEMT150 FLEXEMT200 FLEXEMT250 FLEXEMT300 FLEXEMT350 FLEXEMT400 TRADE SIZE A LENGTH B DEPTH C HEX D HEX E DIAMETER F DIAMETER 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-15/16" 1-15/16" 2-1/4" 2-7/16" 2-13/16" 2-13/16" 3-1/2" 3-9/16" 3-5/8" 3-5/8" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-5/16" 1-1/4" 1-5/16" 1-5/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 15/16" 1-3/16" 1-7/16" 1-13/16" 2-1/16" 2-9/16" 3-7/16" 3-7/8" 4-7/16" 4-15/16" 1-1/8" 1-3/8" 1/5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" 1" 1-1/4" 1-1/2" 1-7/8" 2-3/16" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E101868 Available OPTIONS: * EMT Set Screw Fitting to Flex Rigid Conduit Adapters to Flex Liquid Tight Conduit Adapters to Flex SPECflex Single Turn On Flex Connector Note: SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL off-shore conduit. Request a sample from factory to ensure capatibility. 100 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT & Rigid Conduit Brace Since 1946 Industrial SPEC-grade A Complete Out of the Box Bracing or Conduit Sleeve Solution - “Just Add Your Conduit” Uni-BRACE ™ Wall Pentration Sleeve and Conduit Brace Fully Supports Conduit and Prohibits Conduit from Moving Integrated Alloy Steel Zinc Plated Escutcheon Plate Smooth ID & Rounded Edges Provides a Fast and Safe Wire Pull No Bushing Required RainTight Option Available Sealing Ring and Gasket Precision Machined Threads on Connector Body & Nut Patented Compression Ring 1” to 4” Compression Fittings Are Rated & Listed by UL for Use on Either EMT & Rigid Conduit Steel Construction, Zinc Plated, Chromate Compression Connector Flat Wrenching Surface, Accomodates Channel Lock to Wrench Secure No Need to Disassemble, Simply Loosen Nut and Slide on Conduit Once Tighted, Competely Braces and Secures Conduit from Forward, Backward & Lateral Movement Fully Machined ID to Assist and Provide a Fast & Easy Wire Pull NEVER a Burr or Edge Secures Conduit Against Wall or Structure While Fully Compressing on Conduit Low Profile, Modern Design to Blend with Conduit Single ByPass Wall Full Dual Bracing with 2 Units Precision Machined Steel Threads EZ-Torque™ Design Exploded View of Compression Feature Uni-BRACE ™ Locks Tight & Right, Can be Removed and Repositioned Use in Vertical Runs As a Floor or Ceiling Sleeve and Securing Conduit Use Two Units to Fully Brace Conduit On Both Multiple Pass Throughs Fully Secure and Brace Single Length or Extended Conduit Runs No Need to Thread Conduit Designed & Manufactured in the USA by AMERICAN FITTINGS Corporation Expand Your Runs Gain Bracing While Locking Your Conduit in Place 101 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT & Rigid Conduit Brace Since 1946 Industrial SPEC-grade Uni-BRACE ™ Wall Pentration Sleeve and Conduit Brace Size Range: 1” to 4 ” Alloy Steel Featuring: Connector Body & Compression Nut Machined from Solid Alloy Steel Bar Stock Zinc Plated with Chromate Finish *** 2-1/2 “ through 4” Compression Fittings are UL Listed & Approved for Both EMT & Rigid Conduit * EMT, Rigid and IMC Conduit * Flat Hex Surfaces for Full and EZ-Torque™ Fully Precisioned Machine Cut Threads Galvanized Plating Option Available ** Conduit Brace and Wall Sleeve Can Be Used for EMT and Rigid Conduit on Internal & External Walls, & Enclosure, Boxes Locks Your Conduit in Place on Single or Both Ends of Walls, Ceilings. or Floors Fully Supports and Braces Conduit Loads Provides Supports Where Straps and Hangers Cannot be Used Creates and Seals Entry Through Holes Provides a Finished Look to Conduit Run in Public Areas US Patented Design A Patented D B C E Save Time & Money No Need to Thread Rigid Conduit Provides Full Support and Bracing No Need to Cut Pipe for Pass-Through Walls, Run Full Lenght of Pipe CAT # Trade Size A Length B Hex ERCB100 ERCB200 ERCB250 ERCB300 ERCB350 ERCB400 1" * 2" * 2-1/2" 3" 3-1/2" 4" 1-1/16" 1-3/8" 1-5/16" 1-7/16" 1-7/16" 1-11/16" 1-7/16" 2-9/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" * 1” and 2” rated for EMT Compliances: D C Outer Diameter Diameter 1-1/2" 2-1/16" 2-11/16" 3-3/8" 3-3/8" 4" 4" 4-9/16" 4-9/16" 5-1/8" 5-1/16" 6-1/2" Only Consult Factory for Other Sizes E Brace Thickness 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" Wt. Per/C 18 45 60 78 80 183 Dimensions shown are + 1/16” - 1/32” *** Plating Options: Galvanized Plating Option: Add suffix “G” to cat #’ Certified Made in the USA Uni-BRACE™ Can Be Color Coded Compression Fittings Are UL Listed QUICKLY IDENTIFY CRITICAL SYSTEMS Acts as a Fire Stop When Used with UL Rated Fire Stop Putty Seal or Fire alarms, security systems, fiber optics, Conduit Wrap * high- and low-voltage circuits, data circuit with Rated Mil-STD 810 Sinusoidal Virbration Test Color Coded Uni-BRACE™ for Your Federal Standard A-A-50553 Thru-the-Wall Sleeves and Conduit Runs. Compression Fittings Comply to UL Standards: 514B, 467 CA Prop.65 Compliance * Fire Stop Ratings and Code Requirements are strictly left to the installer and design firm.. RoHS Compliant AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 102 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT One Hole Straps Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CSE - 1 Hole EMT Strap Material: Steel Construction Bright Electro Zinc Plated CSE Series Steel EMT Straps AMFICO Steel One Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Alignment of EMT is Quick and Easy. Made in the USA A C B Thickness .060” Cat # TRADE SIZE A LENGTH B HEIGHT C HOLE ID Unit Mstr. Wt. Ctn. Ctn. Per/C CSE501 CSE751 CSE1001 CSE1251 CSE1501 CSE2001 CSER2501 CSER3001 CSER3501 CSER4001 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-5/8" 1-7/8" 2-1/8" 2-3/4" 3" 3-3/4" 4-3/4" 5-3/8" 6" 6-1/2" 11/16" 15/16" 1-3/16" 1-1/2" 1-3/4" 2-3/16" 2-7/8" 3-1/2" 4" 4-1/2" 1/4" 1/4" 5/16" 3/8" 3/8" 7/16" 9/16" 9/16" 9/16" 9/16" 100 100 50 30 25 20 - Compliances: Certified Made in the USA Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31162310 - 1000 500 250 150 125 100 20 10 10 10 3 4 6 9 13 17 42 49 71 78 Available OPTIONS: 2 Hole Straps EMT and Rigid One-Hole BX Type Cat. # CSBX381 Unit Ctn Size 12-2, 12-3, 100 Std Pkg WT/ 100 1000 1 10-2, 10-3 103 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Two Hole Straps Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CSE - 2 Hole EMT Strap Material: Steel Construction Bright Electro Zinc Plated CSE Series EMT Steel Straps AMFICO Steel Two Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Alignment of EMT is Quick and Easy. Made in the USA C B D Thickness .060” A Cat # TRADE SIZE A LENGTH B HEIGHT CSE502 CSE752 CSE1002 CSE1252 CSE1502 CSE2002 CSER2502 CSER3002 CSER3502 CSER4002 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-1/4" 2-5/8" 3-1/4" 4" 4-1/4" 5-1/8" 5-7/8" 6-1/2" 7/1/8" 7-3/4" 13/16" 1-1/16" 1-5/16" 1-11/16" 1-7/8" 2-3/8" 2-7/8" 3-1/2" 4" 4-1/2" Compliances: Certified Made in the USA Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31162310 C HOLE ID 3/16" 3/16" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 7/16" 7/16" HOLE SPACING Wt. Per/C 1-13/16" 2-3/16" 2-9/16" 3-3/16" 3-3/8" 4-1/4" 5" 5-1/2" 6-3/16" 6-13/16" 2 3 5 7 12 15 17 23 26 33 Unit Mstr. Ctn. Ctn. 100 100 50 30 25 20 - 1000 500 250 150 125 75 20 10 10 10 Available OPTIONS: 1 Hole Straps EMT and Rigid One-Hole BX Type Cat. # CSBX381 Unit Ctn Size 12-2, 12-3, 100 Std Pkg WT/ 100 1000 1 10-2, 10-3 104 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Hanger Bolted for EMT and Rigid Since 1946 Size Range: 1/2” - 4 ” (0 - 9) Product Series: CHB Bolted Hanger Support Material: Steel Construction Bright Electro Zinc Plated Industrial SPEC-grade Made in the USA Conduit Hangers With Attached Nut And Bolt Securely Connect EMT or Rigid /IMC Conduit Directly To Mounting Surface. Threaded Bolt Features Slotted Phillips Head and Nut. Chb Series 3 Holes Bolted Hangers AMFICO Steel 3 Hole Conduit Hanger Bolts And Clamps Onto The Conduit Bolt On with Mounting Hole Suitable to Attach to a Traditional Beam Clamp Furnished with Steel Threaded Bolt and Nut C A B Cat # Trade Size Rigid CHB0US CHB1US CHB2US CHB25US CHB3US CHB4US CHB5US CHB6US CHB7US CHB8US CHB9US 0 1 2 2-1/2 3 4 5 6 7 8 9 3/8"-1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" EMT 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" A B C 13/16” 1” 1-3/16” 1-1/2” 1-3/4” 1-7/8” 2-1/4” 2-7/8” 3-1/2” 4” 4-1/2” 1-7/8” 2-1/8” 2-7/16” 2-3/4” 2-7/8” 3-1/4” 3-7/8” 4-5/8” 5-1/2” 5-3/4” 6-1/4” 3/4” 3/4” 7/8” 7/8” 7/8” 1” 1” 1-1/8” 1-3/16” 1-1/4” 1-1/4” Compliances: Certified Made in the USA UL Listed 2239 Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121701 Wt. / Std. Mstr. C Carton Carton 7 7 8 11 11 19 22 28 31 32 37 50 50 250 250 25 20 125 100 100 50 50 25 20 10 10 20 10 10 - Available OPTIONS: 1 Hole and 2 Hole Straps for EMT and Rigid Conduit 105 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Plastic Insulated Bushings Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: EIB Industial Plastic Insulated Threaded Bushings Use with EMT Tubing Push On Tubing End with Molded Stop Non-Grounding Material: Polypropylene Impact Resistant Color: Gunmetal Gray Temperature Rated at 105˚C EIB Series Plastic Push On EMT Bushing AMFICO EMT plastic insulating bushings offer maximum protection for cables to avoid damaging abrasion due to sharp EMT edges. Snap onto EMT tubing and they firmly hold and remain in place. Ideal for use in all environments where conductor integrity is of prime importance, such as tele-communication, data centers & security system installations. Made in the USA Bushings provide smooth, rounded surfaces at the ends of raceways and easily affixes to conduit. Will not Pull off during large size wire pulls. B A Cat. # C Trade Size Unit Ctn Std. Pkg g WT/100 A B EIB50 1/2” 100 1000 1 .558 .537 EIB75 3/4” 100 500 1 .743 .525 EIB100 1” 50 250 1 .945 .635 EIB125 1-1/4” 40 200 1 1.240 .625 EIB150 1-1/2” 40 200 2 1.440 .625 EIB200 2” - 50 2 1.870 .625 EIB250 2-1/2” - 25 4 2.240 1.230 EIB300 3” - 25 6 2.750 1.230 EIB350 3-1/2” - 20 7 3.340 1.110 EIB400 4” - 15 11 3.770 1.230 Compliances: Certified Made in the USA UL Listed 514B NEMA Standard FB Meets 2008 NEC Requirements for 300-15(c) Protection Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31131700 For Rigid Threaded Plastic Bushings See Product Group Series PIB 106 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Plastic Insulated Bushings Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: EIB Industial Plastic Insulated Threaded Bushings Use with EMT Tubing Push On Tubing End with Molded Stop Non-Grounding Material: Polypropylene Impact Resistant Color: Gunmetal Gray Temperature Rated at 105˚C EIB Series Plastic Push On EMT Bushing AMFICO EMT plastic insulating bushings offer maximum protection for cables to avoid damaging abrasion due to sharp EMT edges. Snap onto EMT tubing and they firmly hold and remain in place. Ideal for use in all environments where conductor integrity is of prime importance, such as tele-communication, data centers & security system installations. Made in the USA Bushings provide smooth, rounded surfaces at the ends of raceways and easily affixes to conduit. Will not Pull off during large size wire pulls. B A Cat. # C Trade Size Unit Ctn Std. Pkg g WT/100 A B EIB50 1/2” 100 1000 1 .558 .537 EIB75 3/4” 100 500 1 .743 .525 EIB100 1” 50 250 1 .945 .635 EIB125 1-1/4” 40 200 1 1.240 .625 EIB150 1-1/2” 40 200 2 1.440 .625 EIB200 2” - 50 2 1.870 .625 EIB250 2-1/2” - 25 4 2.240 1.230 EIB300 3” - 25 6 2.750 1.230 EIB350 3-1/2” - 20 7 3.340 1.110 EIB400 4” - 15 11 3.770 1.230 Compliances: Certified Made in the USA UL Listed 514B NEMA Standard FB Meets 2008 NEC Requirements for 300-15(c) Protection Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31131700 PG | For Rigid Threaded Plastic Bushings See Product Group Series PIB 107 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT Bushings Knockout Insulated Since 1946 Industrial SPEC-grade Size Range: 1/2” - 2 1/2 ” Product Series: KOS Non Metallic Insulated Bushings UL Rated 105ºC Flamability UL94V-2 Material: Nylon Dupont Zytel Color: Black Finish: As Molded KOS Series Bushings Insulated Snap In Converts Conduit and Box Rough Edge Holes to Smooth Neat Insulated Entries. Insulates and Mechanically Protects Wires and Cables. Snaps in Place with Tight Locking Fingers. Made in the USA Labor Saving Snap-in Design Does Not Require Any Special Tools for Installation. Locks in Place in Knockout Openings so Wires can be Pulled Through the Openings Without Loosening the Bushings. B A C Trade Size A ID ø B OD ø C Standard Carton Master Carton WT/ 100 NKB50 1/2” .750” .953” .406” 100 1000 1 NKB75 3/4” .812” 1.218” .406” 100 500 1 NKB100 1” 1.00” 1.468” .463” 50 500 1 NKB125 1 1/4” 1.38” 1.875” .463” 50 250 1 NKB150 1 1/2” 1.64” 2.125” .463” 25 125 2 NKB200 2” 1.96” 2.660” .700” 20 100 3 NKB250 2 1/2” 2.50” 3.200” .700” 10 50 4 Cat. # Compliances: Certified Made in the USA Meets UL 514B NEMA FB1 Federal Standard A-A-50553 RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 Available OPTIONS: Plastic Threaded Insulated Bushings for Rigid Conduit Plastice Snap On Insulated Bushings for EMT 108 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Industrial Grade Locknuts Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: LN Industial Locknut Material: Steel Construction Zinc Plated LN Series LOCKnuts Used to Fasten Threaded Rigid or IMC Conduit or Fittings to Box, Apparatus or Enclosure. Made in the USA * except as noted below Precisioned Stamped with Cut Threads Industrial Grade Will Not Distort or Crack Under Load Stays Flat for Full Bonding to Box Tangs Bite Into Enclosure for Vibration Resistant A B Std Pkg. 2000 Wt. /c 1/2 Unit Carton 200 1 1.13 .13 LN75L 3/4 100 1000 2 1.38 .14 LN100L 1 50 500 4 1.72 .18 LN125L 1-1/4 50 500 7 2.06 .19 LN150L 1-1/2 25 250 8 2.38 .18 LN200L 2 25 250 9 2.89 .19 LN250 * 2 1/2 - 30 29 3.54 .39 LN300 * 3 - 25 42 4.23 .39 LN350 * 3 1/2 - 25 48 4.75 .39 LN400 * 4 - 25 52 5.29 .39 Cat. # * LN50L Trade Size “ Compliances: Certified Made in the USA * UL 514B NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 Aø B C Available OPTIONS: Heavy Duty Industrial Bonding Locknuts HDI Series Heavy Duty True Tight Grounding Locknuts AH Series Compliment with our Product Series SW Sealing Washers for Complete Environmental Protection. * 2-1/2” to 4” are not UL Listed and do not meet BAA or Made in USA. For tUse AMFICO HDI Series Locknuts Full Steel, UL, Made in USA AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 109 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Steel Heavy Duty Bonding Locknut Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: HDI Steel Bonding Locknut Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish HDI Series LOCKnuts Used to Fasten and Provide Bonding to Threaded Rigid or Imc Conduit to Box or Enclosure. Made in the USA Precisioned Machined from Alloy Steel Bar Stock Flat HEX Surfaces for Full Torque Values Without Damage to Threads or Locknut Will Not Distort and Stays Flat for Full Bonding to Box TWICE the Strength and Durability of Die Cast & Malleable Iron Products A Unique Diamond Beveled Face Grips Enclosure for Assured Bonding & Locking With VIBRATION PROOF Peformance B The Strongest and Finest Locknut Made Use When Inferior is Not an Option! Notched to Provide Solid Area To “Bump & Lock” Without Damage Unit Carton 1.13 .13 200 Std Pkg. 2000 LN 75HDI 3/4 1.39 .13 100 1000 4 LN100HDI 1 1.69 .17 50 500 6 LN125HDI 1 1/4 2.06 .17 50 500 14 LN150HDI 1 1/2 2.28 .17 25 250 17 LN200HDI 2 2.78 .17 250 9 LN250HDI 2 1/2 3.39 .25 25 - 30 36 LN300HDI 3 4.00 .25 25 55 LN350HDI 3 1/2 4.56 .25 - 25 25 LN400HDI 4 5.09 .25 - 25 101 Cat # LN 50HDI Trade Size ” 1/2 “A” Compliances: Certified Made in the USA UL 514B, 467 NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131700 “B” WT/100 2 Available OPTIONS: Standard Grade Locknuts Double Duty Hub Grade Bonding and Grounding Locknuts Compliment with our Product Series SW Sealing Washers for Complete Environmental Protection. E101868 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 110 AMERICAN FITTINGS Corporation ® Sealing Washer Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: SW Molded Sealing Washer Materials: Polyethylene HDPE Color: Green Sealing washers are commonly used with cable glands or similar fittings entering an enclosure. While these products are not threaded, they are available with clearance holes to accommodate NPT threads. Made in the USA Use : HDPE Washer Provides Positive Seal Against Water, Oils & Other Liquids When Used in Conjuction with a Locknut or Threaded Fitting into a Threaded Housing Same Washer Used on our RainTight and Liquid Tight Fittings C A Cat # Trade Size SW50 SW75 SW100 SW125 SW150 SW200 SW250 SW300 SW350 SW400 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" B A Outer Diameter 1-1/8" 1-3/8" 1-5/8" 1-15/16" 2-1/4" 2-11/16" 3-3/8" 4-1/16" 4-5/8" 5-1/8" B C Std Wt. /c Inner Thickness Pkg. Diameter 7/8" 5/64" 500 .50 1-1/16" 5/64" 500 .50 1-1/4" 5/64" 250 1 250 1-5/8" 5/64" 1 1-7/8" 5/64" 250 1 2-3/8" 5/64" 250 2 2-13/16" 5/32" 100 2 100 2 3-7/16" 5/32" 3-15/16" 5/32" 50 2 4-7/16" 5/32" 50 2 Compliances: Certified Made in the USA RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121311 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 111 AMERICAN FITTINGS Corporation ® Industrial Sealing Locknut & Gasket Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: SL Industial Sealing Locknut with Fused Molded Gasket Materials: Steel Construction with PVC Molded Gasket Zinc Plated Steel Locknut & PVC Sealing Gasket Provides Raintight Seal When Fastening Threaded Conduit to Non-threaded Entry In an Enclosure or Box. Can Be Used on Threaded Fittings for Environmental Seal. Made in the USA Only One Sealing Locknut is Required to: Functionally Replace Rigid Threaded Enclosure Connectors Provide Positive Ground Connection Provide Economies In Installation & Fitting Costs Features : Integrally Fused PVC Gasket Provides Positive Seal Against Water, Oils & Other Liquids Designed for Use with Watertight, Raintight & Oiltight Enclosures, NEMA 2, 3, 3r, 4 & 12 Can Be Used With Either Sheet Metal or Standard Cast Metal Boxes A Replaces All STG Style Sealing Rings 1 Piece Construction No Gasket Movement “ B” Thickness 1/2 Unit Carton 100 1 1.13 .13 SL2 3/4 100 1000 2 1.38 .14 SL3 1 50 500 4 1.72 .18 SL4 1-1/4 50 500 7 2.06 .19 SL5 1-1/2 25 250 8 2.38 .18 SL6 2 25 250 9 2.89 .19 SL7 * 2 1/2 - 30 29 3.54 .39 SL8 * 3 - 25 42 4.23 .39 SL9 * 3 1/2 - 10 48 4.75 .39 SL10 * 4 - 10 52 5.29 .39 Cat. # * SL1 Trade Size “ Compliances: Certified Made in the USA * UL 514B NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 Std Pkg. 1000 Wt. /c A B C Available OPTIONS: Heavy Duty Bonding Locknuts HDI Series Heavy Duty True Tight Grounding Locknuts AH Series LN Series of Industrial Grade Locknut . * 2-1/2” to 6” are not UL Listed and do not meet BAA or Made in USA. For tUse AMFICO HDI Series Locknuts Full Steel, UL, Made in USA AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 112 e: info@amftgs.com Specifications Subject to Change Without Notice NOTES MY PRODUCT NOTES American Fittings Contact: Email: Telephone: website: amftgs.com tel: 800.221.5268 113 The NEXT Generation of Fittings Made in the USA FMC 2020 Flexible Metal Conduit Fittings Industrail Grage AC MC Double Saddle Connectors PVC Coated AC Teck Cable Fittings FLEX Conduit Greenfield Fittings Save on Installation Costs Improve Your Application Put the USA Mark on Your Work! 114 © 2020 AMERICAN FITTINGS Corporation ® AC MC Saddle Connectors Since 1946 Industrial SPEC-grade Size Range: 3/8 - 1 1/4” Product Series: ACMC Connectors Specification Grade Material: Alloy Steel Construction Zinc Plated with a Chromate Finish Made in the USA Used to Secure Steel or Aluminum Flexible Metal Conduit or Armored Cable, or Metal Clad Cable to Box or Enclosure. Furnished a UL Listed Insulated Throat Rated 150° & Industrial Grade Steel Locknut Double Saddle for Redundant & Secure Grip to Cable and Safe Connection to Enclosure or Box This Fitting with Machined Cut Steel Threads is Fully Reuseable The STRONGEST & MOST Durable Saddle Connector Made Twice the Strength and Durability of ALL Die Cast & Malleable Iron Fittings E ØD ØC Locknut Furnished Cat # Trade Size Knock Out ACMC 38 3/8" 1/2" ACMC 50 1/2" 1/2" ACMC 75 3/4" 3/4" ACMC100 1" 1" B 1-3/16" 1-1/2" C D Dia. Dia. 11/16" 3/8" 1" AC Cable Size MC Cable Size Wt. Per/C Min. Max. Min. Max. Min. Max. .42 .69 14/2 8/2 14/2 8/2 8 9/16" 1-3/16" .63 .94 8/2 6/4 10/4 6/4 10 2" 3/4" 1-7/16" .81 1.22 6/3 3/3 6/3 3/3 13 1-11/16" 1.08 1.47 4/3 2/0-3 4/3 2/0-3 22 1-7/8" 2-13/16" 1-11/16" 1-5/16" 1-15/16" 1.37 1.68 2/0-4 3/0-3 2/0-4 3/0-3 27 1-3/16" 1-3/4" 2-1/2" 1-7/16" 1" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121419 E101868 AMFTGS.com E Cable Range 1-3/8" 1-11/16" 15/16" 1-7/16" ACMC125 1-1/4" 1-1/4" Fittings are Furnished with Insulated Throat Bushing Eliminates Anti-Short Bushings or Red Heads A A Max Extension B Features: Precision Machined Alloy Steel Fitting Permits Full Torque Values to Avoid Conduit Pullout. Unlike Die Cast, Fitting Will Not Deform or Crack Under Load Solid Steel Double Grip Tight Retaining Saddle Safeguards the Conduit Jacket from Abrasion and Reduces the Torque Required for a Secure Connection Fully Machine ID for EZ WIRE PULL Eliminating Sharp Binding Edges or Burrs to Snag Your Cable Suitable for Dry Location Only Suitable for Steel or Aluminum Cables t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 115 AMERICAN FITTINGS Corporation ® Jacketed MC Cable Connector PVC MC/TECK Cable Connector Since 1946 Industrial SPEC-grade Size Range: 1/2 - 1 1/4” Page 1 Product Series: SPECTECK Connectors Material: Alloy Steel Construction Zinc Plated with a Chromate Finish* Used to Secure PVC Jacketed Armored Cable to a Box or Enclosure. Made in the USA SPECTECH PVC Jacketed AC Cable fittings may be used for branch circuit and feeder wiring for lighting, control, and signal circuits in wet, dirty, or oily locations, buried directly in earth or concrete, surface mounted or trenched. SPECTECH fittings are the next generation of AC MC connectors. They are designed to accommodate a broad range of cables. Each trade sized hub range overlaps the adjacent hub range, thereby minimizing the possibilityof mismatched cables and fittings in the field. SPECTECK Most times there is no need to disassemble fitting to install. The grommet factory installed is based on the most popular cable size. Fully Machined ID No Burrs to Snag Wire Furnished with Color Coded Sized Grommets to Precisely Fit Your Cord - see page 2 The STRONGEST & MOST Durable AC MC Connector Made, Twice the Strength and Durability of ALL Die Cast & Malleable Iron Fittings Fully Machined Solid Alloy Steel Body Alloy Steel Fully Machined Compression Nut Domed Top to Shed Liquids Seals Tight & Right Steel Compression Ring and Santoprene Grommet Unique Precise Grounding Ring Grabs and Retains With Strength Armored Cord Compliances: Certified Made in the USA UL 514B, 467 NEMA Standard FB1 Rated NEMA Types 2, 3, 3R, 3, 4X, 5, 12, 13 NEC: Class I, Division 2 Class II, Divisions 1 and 2; Class III, Divisions 1 and 2 Federal Standard A-A-50553 UL Rated for Wet Locations Guaranteed to Seal Out Liquids, Contaminants & Ingress of Other Fluids Suitable for Direct Burial CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121419 AMFTGS.com Features: * Galvanized Plating Option is Available, Consult Factory Grommet Material is Santoprene UL TPV 94VO Rating FDA Approved; UV Resistant UL (f1) Rated Solid Alloy Steel Construction Fully Precision Machined Provides Full Torque Values to Avoid Conduit Pullout and Maintains Full Grounding Unlike Die Cast, Fitting Will Not Deform or Crack Under Load Solid Steel Double Grip Tight Retaining Saddle Safeguards the Conduit Jacket from Abrasion and Reduces the Torque Required for a Secure Connection t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ Furnished with Sealing Washer and Our HDI Locknut 116 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Jacketed MC Cable Connector PVC MC/TECK Cable Connector Since 1946 Industrial SPEC-grade Size Range: 1/2 - 1 1/4” Page 2 Product Series: SPECTECK Connectors C B Greater Cable Ranges with Less Catalog Numbers A Always the Size You Need When You Need It. E SPECTECK D Each Catalog Number is furnished with the color sized grommets as shown for that cable range. Cat # Trade Size Strip Outer Jacket (2) Cable Range Over Jacket Cable Range Over Armor Grommet Colors Included-Kit A Kit Example Shown Below .920-.985 Green Shown: TECK 50 - example - each fitting is individually bagged and comes with full set of instructions and color coded grommet chart. No need to disassemble the fitting, simply loosen the locknut and insert cable AFTER performing Steps 1-3 If you need to select a different grommet, simply loosen and slide the nut on the cable - Remove Gray grommet and i nsert the correct grommet size according to the sizing chart shown below and your cable’s OD size. IMPORTANT FOR PROPER GROUNDING: 1. BEFORE Installing Fitting Slide the cable all the way into the fitting until it snaps into the grounding retention ring. Choose Correct Grommet for the Size Cable You are Using See Chart Below 2. BEFORE Installing Fitting TECK50 Grommet Size Range Chart Range Over Jacket Grommet OD Min - Max Color to Use .610 - .720 Black .520 - .610 Grey (i) .485 - .535 Yellow Strip Outer PVC Jacket 3/8"- 1/2" Length of Armor 3. BEFORE Installing Fitting Cut Armor Back to the Length Of Conductor Wires You Require For Wiring Compression Nut Furnished Locknut (i) Factory Installed Each fitting is individually bagged with assorted grommets and a color range chart for the additional grommets for that trade size. Furnished Sealing Washer 117 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® FMC SPEC flex Connectors Since 1946 Industrial SPEC-grade REPLACES SQUEEZE FITTINGS ON FMC Size Range: 3/8 - 4” Product Series: FLX Connectors Specification Grade Material: Steel Construction with Zinc Plated with a Chromate Finish Aluminum Construction Available For Use on UL Listed FMC/Greenfield Conduit * To Install Insert Flex Conduit & Simply Turn Fitting Onto Conduit Fitting is Reuseable, To Remove, Reverse Process Made in the USA, Patented Installs 10 Times Faster Then ALL Squeeze Fittings SPECflex Furnished with Locknut TM Irregular Cut Conduit ! NO PROBLEM, Screw It On! Exceeds UL Pullout Requirements by 300% Will Not Vibrate Loose Twice the Strength and Durability of ALL Die Cast & Malleable Iron Fittings A D Fittings are Furnished with Insulated Throat Bushing Eliminates Anti-Short Bushings or Red Heads B Solid Alloy Steel Body C HEX Throat Bushing Furnished Locknut Furnished The PERFECT Connector Cat # Whips Lighting Connections FLX38 Equipment Connections FLX 50B Under Floor Installations FLX 75B Data Centers Elevators FLX100B Metro Stations FLX125B CCTV Camera FLX150B FLX200B TRANSITION to EMT FLX250B Rigid FLX300B Seal Tight FLX350B With Flex Adapters FLX400B Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121419 E101868 AMFTGS.com Trade Size A Length B Depth C Hex D Diameter 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1" 1-3/16 1-3/16" 1-1/2" 1-5/8" 1-15/16" 1-15/16" 2-3/8" 2-7/16" 2-7/16" 2-7/16" 9/16" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-1/4" 1-1/4" 1-5/16" 1-5/16" 15/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 1" 1-1/8" 1-3/8" 1-5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" MODERN DESIGN Outfits Your Panels Low Profile Takes Up Far Less Room on Your Panel or Box No Screws or Clamps to Intefere with Position Squeeze Fittings Resemble Fence Fittings SPECflex Provides a Finished Look & Feel Features: No Screws to Pinch or Pierce Conduit Alloy Steel Construction* NOT a Thin Wall Die Cast Fitting Maintains Full Integrity of Conduit ID & OD Allows More Room Inside Conduit For Wire You Can Count-On a Safe Burr-less Wire Pull FULL Connector System Available for Transitions / Adapters FMC Conduit to EMT, Rigid, LT, & Flexible Cord and 90º Connectors * SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL or off-shore conduit. equest a sample to ensure compatibility t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 118 AMERICAN FITTINGS Corporation ® FMC SPECflex 90° Connectors Since 1946 Industrial SPEC-grade Size Range: 1/2 - 4” Product Series: FLX Connectors Specification Grade Material: Steel Construction with Zinc Plated with a Chromate Finish Twice the Strength and Durability of ALL Die Cast & Malleable Iron Fittings For Use on UL Listed FMC/Greenfield Conduit * To Install Insert Flex Conduit & Simply Turn Fitting Onto Conduit Fitting is Reuseable, To Remove, Reverse Process Made in the USA, Patented Installs 10 Times Faster Then ALL Squeeze Fittings SPECflex Irregular Cut Conduit ! NO PROBLEM, Screw It On! Exceeds UL Pullout Requirements by 300% Will Not Vibrate Loose Fully Reuseable Locknut Furnished Throat Bushing Furnished NO NEED TO TAKE FITTING APART TO INSTALL D TM Fittings are Furnished with Insulated Throat Bushing Eliminates Anti-Short Bushings or Red Heads Solid Alloy Steel Body C B A Cat # FLX5090B FLX7590B FLX10090B FLX12590B FLX15090B FLX20090B FLX25090B FLX30090B FLX35090B FLX40090B Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121419 E101868 AMFTGS.com Trade Size 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 3-1/2” 4” A LENGTH 3" 3-1/4" 3-7/8" 4-5/16" 5-1/16" 5-5/8" 9-3/4" 10-7/8" 12-1/4" 13-5/8" B HEIGHT 1-13/16” 2-5/16” 2-3/4” 2-15/16” 3-3/16” 3-3/4” 8-13/16” 9-1/16” 10-9/16” 12-3/16” C Hex 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" D DIAMETER 1" 1-1/8" 1-3/8" 1-5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" Features: No Screws to Pinch or Pierce Conduit Alloy Steel Construction* NOT a Thin Wall Die Cast Fitting Maintains Full Integrity of Conduit ID & OD Allows More Room Inside Conduit For Wire You Can Count-On a Safe Burr-less Wire Pull FULL Connector System Available for Transitions / Adapters FMC Conduit to EMT, Rigid, LT, & Flexible Cord and45º Connectors * SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL or off-shore conduit. equest a sample to ensure compatibility t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 119 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® FMC SPECflex 90° Connectors Installtion Instructions Since 1946 SPECflex connectors Please use these instructions for 90 and 45 Adapters. Rev.4 10.2019 SPEC-flex™ Connector with 90° Elbow Cat Numbers** FLX5090B FLX7590B FLX10090B FLX12590B FLX 15090B FLX20090B FLX25090B FLX30090B FLX35090B FLX40090B Made in the USA NOTE: For most installations the only components that require disassembly are the locknut and washer to elbow . SPEC-flex Adapter Nut 90° Elbow TM SPEC-flex Connector ** 45º Adapters Replace 90 in Cat # with 45 Flexible Metal Conduit (Customer Furnished) Exploded Product View Insert NO need to disassemble product simply remove locknut and sealing washer Insert FMC into connector and turn by hand either the connector assembly or conduit until it fully seats and is secure. No Tool Required. * Sealing Washer (Furnished) * When installed properly, SPEC-flex connectors exceed UL pull test by 300%. Locknut (Furnished) Step 1. Diassembly of the part is NOT required. Step 2. Simply remove sealing washer and locknut. Enclosure or Equipment Box (Customer Furnished) Step 3. Turn SPEC-flex assembly on to your conduit as shown above. Step 4. Orientate and attach elbow to enclosure and secure with sealing washer and locknut (washer to exterior of enclosure). Manually tighten locknut to enclosure, then twist fitting 1/8 turn clockwise. Consult NEC and Local Codes for Grounding Compliance. Step 5. If not already done, pull wires through conduit. Consult NEC and Local Codes for Bonding and Grounding Compliance for Your Particular Installation SPEC-flex is available as a straight connector for fast “tool-less” FMC installations. Consult factory for details or call your local distributor and ask for SPEC-flex™ from AMERICAN FITTINGS. ALL SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL or off-shore conduit. equest a sample to ensure compatibility 120 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter EMT Steel Comp. to FMC (flex) Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: FLXEMT EMT Compression* to Greenfield (FMC) Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Made in the USA Exceeds UL Pullout Requirements by 300% Unlike Diecast Product Cannot Crack or Deform SPEC Connector System Converts EMT Conduit to FMC flex Conduit Compression Configuration One Piece Construction No Need to Take Adapter Apart to Install Twists onto FMC without the use of a tool. Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts A B F C E D Cat # FLEXEMT50 FLEXEMT75 FLEXEMT100 FLEXEMT125 FLEXEMT150 FLEXEMT200 FLEXEMT250 FLEXEMT300 FLEXEMT350 FLEXEMT400 TRADE SIZE A LENGTH B DEPTH C HEX D HEX E DIAMETER F DIAMETER 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-15/16" 1-15/16" 2-1/4" 2-7/16" 2-13/16" 2-13/16" 3-1/2" 3-9/16" 3-5/8" 3-5/8" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-5/16" 1-1/4" 1-5/16" 1-5/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 15/16" 1-3/16" 1-7/16" 1-13/16" 2-1/16" 2-9/16" 3-7/16" 3-7/8" 4-7/16" 4-15/16" 1-1/8" 1-3/8" 1/5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" 1" 1-1/4" 1-1/2" 1-7/8" 2-3/16" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E101868 Available OPTIONS: * EMT Set Screw Fitting to Flex Rigid Conduit Adapters to Flex Liquid Tight Conduit Adapters to Flex SPECflex Single Turn On Flex Connector Note: SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL off-shore conduit. Request a sample from factory to ensure capatibility. 121 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Rigid Steel SS to FMC (flex) Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: FLXSNT Rigid Conduit Set Screw* to Greenfield (FMC) Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Made in the USA Exceeds UL Pullout Requirements by 300% Unlike Diecast Product Cannot Crack or Deform Rigid Side: 1/2” to 2” Furnished with 1 Screw 2-1/2” to 4” Furnished with 2 Screws SPEC Connector System Converts Rigid Conduit to FMC flex Conduit Set Screw Configuration Precision Machined from Solid Alloy Bar Stock One Piece Construction No Need to Take Adapter Apart to Install A Twists onto FMC without the use of a tool. B F E C D Cat # TRADE SIZE A LENGTH B DEPTH C HEX D HEX E DIAMETER F DIAMETER FLEXSNT50 FLEXSNT75 FLEXSNT100 FLEXSNT125 FLEXSNT150 FLEXSNT200 FLEXSNT250 FLEXSNT300 FLEXSNT350 FLEXSNT400 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-5/8" 2-11/16" 3" 3-11/16" 4-1/8" 4-15/16" 5" 5-1/8" 5-1/8" 5-1/8" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-1/4" 1-1/4" 1-5/16" 1-5/16" 1-1/8" 1-3/8" 1-5/8" 2-1/16" 2-5/16" 2-13/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 1-3/16" 1-7/16" 1-11/16" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" 1-1/8" 1-3/8" 1-5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E101868 Available OPTIONS: * Rigid Set Screw Fitting to Flex Rigid Conduit Adapters to Flex Liquid Tight Conduit Adapters to Flex SPECflex Single Turn On Flex Connector Note: SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL off-shore conduit. Request a sample from factory to ensure capatibility. PG | 122 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter EMT Steel SS to FMC (flex) Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” EMT Set Screw* to Flex Adapter Product Series: FLXSS EMT Set Screw to Greenfield (FMC) Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Made in the USA Exceeds UL Pullout Requirements by 300% Unlike Diecast Product Cannot Crack or Deform C EMT Side: 1/2” to 2” Furnished with 1 Screw 2-1/2” to 4” Furnished with 2 Screws Converts EMT Conduit to FMC flex Conduit Set Screw Configuration Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts One Piece Construction No Need to Take Adapter Apart to Install Twists onto FMC without the use of a tool. SPEC Connector System A B C Cat # FLEXSS50 FLEXSS75 FLEXSS100 FLEXSS125 FLEXSS150 FLEXSS200 FLEXSS250 FLEXSS300 FLEXSS350 FLEXSS400 F D E TRADE SIZE A LENGTH B DEPTH C HEX D HEX E E DIAMETER F DIAMETER 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-5/8" 3" 3-13/16" 3-9/16" 4-1/8" 5-1/8" 5-1/8" 5-1/4" 5-1/4" 5-1/4" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-5/16" 1-1/4" 1-5/16" 1-5/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 7/8" 1-1/16" 1-3/8" 1-3/4" 2-1/16" 2-1/2" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-1/8" 1-3/8" 1-5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" 7/8" 1-1/8" 1-3/8" 1-3/4" 2-1/16" 2-1/2" 3-7/16" 4" 4-9/16" 5-1/8" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E101868 Available OPTIONS: * EMT Compression Fitting to Flex Rigid Conduit Adapters to Flex Liquid Tight Conduit Adapters to Flex SPECflex Single Turn On Flex Connector Note: SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL off-shore conduit. Request a sample from factory to ensure capatibility. 123 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Adapter Rigid Steel Comp.to FMC (flex) Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: FLXNT Rigid Conduit Compression* to Greenfield (FMC) Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish Made in the USA SPEC Exceeds UL Pullout Requirements by 300% Unlike Diecast Products Will Not Crack or Deform Connector System Converts Rigid Conduit to FMC flex Conduit Compression Configuration Precision Machined from Solid Alloy Bar Stock Machined Cut Threads Full Compression EZ Torque Nuts One Piece Construction No Need to Take Adapter Apart to Install Twists onto FMC without the use of a tool. A B D C F E Cat # TRADE SIZE A LENGTH B DEPTH C HEX D HEX E DIAMETER F DIAMETER FLEXNT50 FLEXNT75 FLEXNT100 FLEXNT125 FLEXNT150 FLEXNT200 FLEXNT250 FLEXNT300 FLEXNT350 FLEXNT400 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-15/16" 3-1/16" 3-1/2" 4-1/16" 4-9/16" 5-7/16" 5-3/4" 6-1/8" 6-1/8" 6-1/8" 11/16" 11/16" 15/16" 1-1/16" 1-3/16" 1-3/16" 1-1/4" 1-1/4" 1-5/16" 1-5/16" 1-1/8" 1-3/8" 1-11/16" 2-1/16" 2-5/16" 2-13/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" 1-1/16" 1-1/4" 1-1/2" 1-13/16" 2-1/16" 2-9/16" 3-5/16" 3-15/16" 4-7/16" 4-15/16" 1-3/16" 1-7/16" 1-3/4" 2-3/16" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" 1-1/8" 1-3/8"" 1-5/8" 1-15/16" 2-3/16" 2-11/16" 3-7/16" 4" 4-9/16" 5-1/8" Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E101868 Available OPTIONS: * Rigid Set Screw Fitting to Flex Rigid Conduit Adapters to Flex Liquid Tight Conduit Adapters to Flex SPECflex Single Turn On Flex Connector Note: SPECflex connectors are designed to work and interface with UL listed, Made in USA FMC / Greenfield conduit. We cannot guarantee fit, form, or function with non-UL off-shore conduit. Request a sample from factory to ensure capatibility. PG | 124 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice NOTES MY PRODUCT NOTES American Fittings Contact: Email: Telephone: website: amftgs.com tel: 800.221.5268 125 Hangers Straps Locknuts Pentration Sleeves Hardware The Perfect Compliment for Our Fittings and Your Installations ® Manufactured in the USA Since 1946 t: 800.221.5268 amftgs.com © Copyright 2020 Fair Lawn, New Jersey Hardware & Accessories 2020 Industrial Electrical Fittings SPECgrade Hardware & Accessories Products You Can Trust Integrity You Can Count On 126 AMERICAN FITTINGS Corporation ® Industrial Grade Locknuts Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: LN Industial Locknut Material: Steel Construction Zinc Plated LN Series LOCKnuts Used to Fasten Threaded Rigid or IMC Conduit or Fittings to Box, Apparatus or Enclosure. Made in the USA * except as noted below Precisioned Stamped with Cut Threads Industrial Grade Will Not Distort or Crack Under Load Stays Flat for Full Bonding to Box Tangs Bite Into Enclosure for Vibration Resistant A B Std Pkg. 2000 Wt. /c 1/2 Unit Carton 200 1 1.13 .13 LN75L 3/4 100 1000 2 1.38 .14 LN100L 1 50 500 4 1.72 .18 LN125L 1-1/4 50 500 7 2.06 .19 LN150L 1-1/2 25 250 8 2.38 .18 LN200L 2 25 250 9 2.89 .19 LN250 * 2 1/2 - 30 29 3.54 .39 LN300 * 3 - 25 42 4.23 .39 LN350 * 3 1/2 - 25 48 4.75 .39 LN400 * 4 - 25 52 5.29 .39 Cat. # * LN50L Trade Size “ Compliances: Certified Made in the USA * UL 514B NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 Aø B C Available OPTIONS: Heavy Duty Industrial Bonding Locknuts HDI Series Heavy Duty True Tight Grounding Locknuts AH Series Compliment with our Product Series SW Sealing Washers for Complete Environmental Protection. * 2-1/2” to 4” are not UL Listed and do not meet BAA or Made in USA. For tUse AMFICO HDI Series Locknuts Full Steel, UL, Made in USA AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 127 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Steel Heavy Duty Bonding Locknut Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: HDI Steel Bonding Locknut Material: Solid Alloy Steel Construction Zinc Plated with Chromate Finish HDI Series LOCKnuts Used to Fasten and Provide Bonding to Threaded Rigid or Imc Conduit to Box or Enclosure. Made in the USA Precisioned Machined from Alloy Steel Bar Stock Flat HEX Surfaces for Full Torque Values Without Damage to Threads or Locknut Will Not Distort and Stays Flat for Full Bonding to Box TWICE the Strength and Durability of Die Cast & Malleable Iron Products A Unique Diamond Beveled Face Grips Enclosure for Assured Bonding & Locking With VIBRATION PROOF Peformance B The Strongest and Finest Locknut Made Use When Inferior is Not an Option! Notched to Provide Solid Area To “Bump & Lock” Without Damage Unit Carton 1.13 .13 200 Std Pkg. 2000 LN 75HDI 3/4 1.39 .13 100 1000 4 LN100HDI 1 1.69 .17 50 500 6 LN125HDI 1 1/4 2.06 .17 50 500 14 LN150HDI 1 1/2 2.28 .17 25 250 17 LN200HDI 2 2.78 .17 250 9 LN250HDI 2 1/2 3.39 .25 25 - 30 36 LN300HDI 3 4.00 .25 25 55 LN350HDI 3 1/2 4.56 .25 - 25 25 LN400HDI 4 5.09 .25 - 25 101 Cat # LN 50HDI Trade Size ” 1/2 “A” Compliances: Certified Made in the USA UL 514B, 467 NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131700 “B” WT/100 2 Available OPTIONS: Standard Grade Locknuts Double Duty Hub Grade Bonding and Grounding Locknuts Compliment with our Product Series SW Sealing Washers for Complete Environmental Protection. E101868 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 128 AMERICAN FITTINGS Corporation ® True TIGHT Steel Locknuts Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: AHLN True TIGHT Locknuts Material: Solid Alloy Steel Construction Precision Machined Tolerances Zinc Plated with Chromate Finish AMFICO AHLN Series Bonding Locknuts connect threaded Rigid/IMC conduit to an enclosure, offering supply-side equipment bonding and grounding with various options. Solve problems when connector or conduit thread lengths are taken up by thick metal or non-metallic enclosure walls. Twice the Strength & Durability of ALL Zinc Cast and Malleable Products Made in the USA Flat Hex Surfaces Provide a Area to Wrench for Full Torque Without Distortion or Cracking Distinctive Diamond Shaped Knurled Serrations Bite TIGHT & RIGHT Into All Metals & Finishes Will Not Vibrate Loose & Maintains Watertight Seal C A Style 1 AHLN Locknut Available with or without a Single Ground Screw on Locknut B CAT # TRADE SIZE AH50LN AH75LN AH100LN AH125LN AH150LN AH200LN AH250LN AH300LN AH350LN AH400LN 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" C A Style 2 AHLNGL Locknut with AL Lay-In Lug Lug can be field moved into 1 of 3 factory drilled threaded holes for EZ installation B CAT # TRADE SIZE AH50LN-GL AH75LN-GL AH100LN-GL AH125LN-GL AH150LN-GL AH200LN-GL AH250LN-GL AH300LN-GL AH350LN-GL AH400LN-GL 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" C DIAMETER 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" C A Style 3 AHLNGS Locknut with Tab with Ground Screw B A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS B LENGTH C DIAMETER 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" D LUG HEIGHT 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1/2” to 2” Lug #14-#4 2 1/2” to 4” #8-2/0 Other sizes available consult factory D CAT # TRADE SIZE AH50LN-GS AH75LN-GS AH100LN-GS AH125LN-GS AH150LN-GS AH200LN-GS AH250LN-GS AH300LN-GS AH350LN-GS AH400LN-GS 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS B LENGTH C DIAMETER 5/16" 5/16" 7/16" 7/16" 7/16" 7/16" 5/8" 5/8" 5/8" 5/8" 1-1/4" 1-1/2" 1-13/16" 2-1/4" 2-3/8" 2-7/8" 3-7/16" 4" 4-9/16" 5-1/8" D TAB LENGTH 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" Available OPTIONS: Copper Lugs and Aluminum Ground Lugs with Various Size Wire Capacity Options Available Compliances: Certified Made in the USA UL 514B NEMA Standard FB1 Federal Standard A-A-50553 UL Standards: 514B, 467 CSA Standard: C22.2 No. 18F RoHS and REACH Compliant Prop.65 CA Compliant UNSPSC 39121311 Galvanizing Plating Option: Add suffix “G” to cat # consult factory min.ord. qtys. apply Alternative Locknuts Product Series: LN Commerical Grade or LNHDI Heavy Duty Industrial Grade Ground Lugs are Manufactured from High Strength 6061-T6 Aluminum, and are Ideally Suited for Grounding and Bonding Applications Accommodating Both Copper and Aluminum Conductor Sizes #14 AWG to 250 KCMIL, UL486B Listed, AL9CU Rated, for Copper and Aluminum Conductor File # E258495 AMFTGS.com B LENGTH Can Accomodate a Ground Screw or Add Suffix SS to Cat # or Request Cat# AHLNSS from Factory. D PG | A INTERNAL THREAD 1/2"-14 NPS 3/4"-14 NPS 1"-11.5 NPS 1-1/4"-11.5 NPS 1-1/2"-11.5 NPS 2"-11.5 NPS 2-1/2"-8 NPS 3"-8 NPS 3-1/2"-8 NPS 4"-8 NPS t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 129 AMERICAN FITTINGS Corporation ® Sealing Washer Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: SW Molded Sealing Washer Materials: Polyethylene HDPE Color: Green Sealing washers are commonly used with cable glands or similar fittings entering an enclosure. While these products are not threaded, they are available with clearance holes to accommodate NPT threads. Made in the USA Use : HDPE Washer Provides Positive Seal Against Water, Oils & Other Liquids When Used in Conjuction with a Locknut or Threaded Fitting into a Threaded Housing Same Washer Used on our RainTight and Liquid Tight Fittings C A Cat # Trade Size SW50 SW75 SW100 SW125 SW150 SW200 SW250 SW300 SW350 SW400 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" B A Outer Diameter 1-1/8" 1-3/8" 1-5/8" 1-15/16" 2-1/4" 2-11/16" 3-3/8" 4-1/16" 4-5/8" 5-1/8" B C Std Wt. /c Inner Thickness Pkg. Diameter 7/8" 5/64" 500 .50 1-1/16" 5/64" 500 .50 1-1/4" 5/64" 250 1 250 1-5/8" 5/64" 1 1-7/8" 5/64" 250 1 2-3/8" 5/64" 250 2 2-13/16" 5/32" 100 2 100 2 3-7/16" 5/32" 3-15/16" 5/32" 50 2 4-7/16" 5/32" 50 2 Compliances: Certified Made in the USA RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121311 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 130 AMERICAN FITTINGS Corporation ® Industrial Sealing Locknut & Gasket Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: SL Industial Sealing Locknut with Fused Molded Gasket Materials: Steel Construction with PVC Molded Gasket Zinc Plated Steel Locknut & PVC Sealing Gasket Provides Raintight Seal When Fastening Threaded Conduit to Non-threaded Entry In an Enclosure or Box. Can Be Used on Threaded Fittings for Environmental Seal. Made in the USA Only One Sealing Locknut is Required to: Functionally Replace Rigid Threaded Enclosure Connectors Provide Positive Ground Connection Provide Economies In Installation & Fitting Costs Features : Integrally Fused PVC Gasket Provides Positive Seal Against Water, Oils & Other Liquids Designed for Use with Watertight, Raintight & Oiltight Enclosures, NEMA 2, 3, 3r, 4 & 12 Can Be Used With Either Sheet Metal or Standard Cast Metal Boxes A Replaces All STG Style Sealing Rings 1 Piece Construction No Gasket Movement “ B” Thickness 1/2 Unit Carton 100 1 1.13 .13 SL2 3/4 100 1000 2 1.38 .14 SL3 1 50 500 4 1.72 .18 SL4 1-1/4 50 500 7 2.06 .19 SL5 1-1/2 25 250 8 2.38 .18 SL6 2 25 250 9 2.89 .19 SL7 * 2 1/2 - 30 29 3.54 .39 SL8 * 3 - 25 42 4.23 .39 SL9 * 3 1/2 - 10 48 4.75 .39 SL10 * 4 - 10 52 5.29 .39 Cat. # * SL1 Trade Size “ Compliances: Certified Made in the USA * UL 514B NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant E101868 UNSPSC 39121311 Std Pkg. 1000 Wt. /c A B C Available OPTIONS: Heavy Duty Bonding Locknuts HDI Series Heavy Duty True Tight Grounding Locknuts AH Series LN Series of Industrial Grade Locknut . * 2-1/2” to 6” are not UL Listed and do not meet BAA or Made in USA. For tUse AMFICO HDI Series Locknuts Full Steel, UL, Made in USA AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 131 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Sealing Gasket & Steel Retention Ring Size Range: 1/2” - 4” Product Series: AH MHW Series Sealing Gasket Assembly Material: Solid Alloy Steel Construction Retention Ring Zinc Plated with Chromate Finish Gasket HDPE Made in the USA Since 1946 Industrial SPEC-grade AH Series Sealing Gasket Assembly Used to Fasten and Provide Bonding and Sealing to an Enclosure. Sold as Single Assembly. For Use With: American Fittings AH Watertight Hubs, CG Cord Grips, and STG Liquid Tight Fittings Meets UL 514 B and NEMA FB-1 When Used in Conjuction with these American Fittings Product Groups Tested Liquid Tight NEMA 4X, and RainTight Washer Sits Deep In Retention Ring Sealing Gasket Retention Ring/Cup Washer A D Color Black E C B * Each Cat # includes 1 Sealing Gasket and 1 Retention Ring PG | B Inner Diameter 7/8" C Gasket Thickness 5/64" D Gasket Outer Diameter 1-1/8" E Total Thickness Assembly 1/8" MWH50 1/2" A Outer Diameter 1-1/4" MWH75 3/4" 1-7/16" 1-1/16" 5/64" 1-1/16" 1/8" MWH100 1" 1-11/16" 1-1/4" 5/64" 1-5/8" 1/8" MWH125 1-1/4" 2-1/16" 1-5/8" 5/64" 1-15/16" 1/8" MWH150 1-1/2" 2-5/16" 1-7/8" 5/64" 2-1/4" 1/8" MWH200 2" 2-3/4" 2-3/8" 5/64" 2-11/16" 1/8" MWH250 2-1/2" 3-7/16" 2-13/16" 5/32" 3-3/8" 3/16" MWH300 3" 4-3/16" 3-7/16" 5/32" 4-1/16" 3/16" MWH350 3-1/2" 4-11/16" 3-15/16" 5/32" 4-5/8" 3/16" MWH400 4" 5-3/16" 4-7/16" 5/32" 5-1/8" 3/16" Cat #* Trade Size 132 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Industrial Steel KO Reducing Washer Since 1946 Size Range: 1/2” - 4” Product Series: RW Industial Steel Knockout Reducing Washers Material: Steel Construction Zinc Plated Made in the USA Precisioned Stamped Industrial SPEC-grade RW Series Knockout Reducing Washers Used with Steel Boxes to Reduce the Knockout Size. AMFICO USA Reducing Washers Press Firmly Into Knockout, Providing a Secure Connection. UL Listed & Stamped Will Not Distor or Crack Under Load Stays Flat for Point On Placement Sizes Marked on Washer Cat # Trade Size RW7550 3/4” x 1/2” RW10050 1” x 1/2” RW10075 1” x 3/4” RW12550 1-1/4” x 1/2” RW12575 1-1/4” x 3/4” RW125100 1-1/4” x 1” RW15050 1-1/2” x 1/2” RW15075 1-1/2” x 3/4” RW150100 1-1/2” x 1” RW150125 1-1/2” x 1-1/4” RW20050 2” x 1/2” RW20075 2” x 3/4” RW200100 2” x 1” RW200125 2” x 1-1/4” RW200150 2” x 1-1/2” RW25050 2-1/2” x 1/2” RW25075 2-1/2” x 3/4” RW250100 2-1/2” x 1” RW250125 2-1/2” x 1-1/4” RW250150 2-1/2” x 1-1/2” RW250200 2-1/2” x 2” RW30050 3” x 1/2” RW30075 3” x 3/4” RW300100 3” x 1” RW300125 3” x 1-1/4” RW300150 3” x 1-1/2” RW300200 3” x 2” RW300250 3” x 2-1/2” PG | AMFTGS.com Carton Qty 200 100 100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 Master Wt. per/ Qty c 2000 1000 1000 1000 1000 1000 500 500 500 500 500 500 500 500 500 250 250 250 250 250 250 125 125 125 125 125 125 125 1 2 1 3 2 2 5 5 4 3 8 8 7 6 6 11 11 10 9 8 7 21 21 20 19 18 16 13 Cat # RW35050 RW35075 RW350100 RW350125 RW350150 RW350200 RW350250 RW350300 RW40050 RW40075 RW400100 RW400125 RW400150 RW400200 RW400250 RW400300 RW400350 t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ Trade Size Carton Qty 3-1/2” x 1/2” 3-1/2” x 3/4” 3-1/2” x 1” 3-1/2” x 1-1/4” 3-1/2” x 1-1/2” 3-1/2” x 2” 3-1/2” x 2-1/2” 3-1/2” x 3” 4” x 1/2” 4” x 3/4” 4” x 1” 4” x 1-1/4” 4” x 1-1/2” 4” x 2” 4” x 2-1/2” 4” x 3” 4” x 3-1/2” 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Master Wt. per/ Qty c 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 35 35 34 32 31 28 24 18 43 2 41 40 38 35 1 25 20 Compliances: Certified Made in the USA UL Listed 514B NEMA Standard FB1 Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31161809 e: info@amftgs.com Specifications Subject to Change Without Notice 133 AMERICAN FITTINGS Corporation ® EMT Bushings Knockout Insulated Since 1946 Industrial SPEC-grade Size Range: 1/2” - 2 1/2 ” Product Series: KOS Non Metallic Insulated Bushings UL Rated 105ºC Flamability UL94V-2 Material: Nylon Dupont Zytel Color: Black Finish: As Molded KOS Series Bushings Insulated Snap In Converts Conduit and Box Rough Edge Holes to Smooth Neat Insulated Entries. Insulates and Mechanically Protects Wires and Cables. Snaps in Place with Tight Locking Fingers. Made in the USA Labor Saving Snap-in Design Does Not Require Any Special Tools for Installation. Locks in Place in Knockout Openings so Wires can be Pulled Through the Openings Without Loosening the Bushings. B A C Trade Size A ID ø B OD ø C Standard Carton Master Carton WT/ 100 NKB50 1/2” .750” .953” .406” 100 1000 1 NKB75 3/4” .812” 1.218” .406” 100 500 1 NKB100 1” 1.00” 1.468” .463” 50 500 1 NKB125 1 1/4” 1.38” 1.875” .463” 50 250 1 NKB150 1 1/2” 1.64” 2.125” .463” 25 125 2 NKB200 2” 1.96” 2.660” .700” 20 100 3 NKB250 2 1/2” 2.50” 3.200” .700” 10 50 4 Cat. # Compliances: Certified Made in the USA Meets UL 514B NEMA FB1 Federal Standard A-A-50553 RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121312 PG | Available OPTIONS: Plastic Threaded Insulated Bushings for Rigid Conduit Plastice Snap On Insulated Bushings for EMT 134 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Rigid Threaded Insulated Bushings Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: PIB Industial Plastic Insulated Threaded Bushings Use With Rigid and IMC Threaded Conduit Non-Grounding Material: Polypropylene Impact Resistant Color: Gunmetal Gray Temperature Rated at 105˚C PIB Series Plastic Threaded Bushings AMFICO Rigid Plastic Insulating Bushings to Avoid Damaging Abrasion Due to Sharp Conduit Edges. Ideal for Use in All Environments Where Conductor Integrity Is Of Prime Importance, Such as Tele-communication, Data Centers & Security System Installations. Made in the USA AMFICO Bushings Provide Smooth, Rounded Surfaces at the Ends of Raceways and Easily Threads Onto Conduit. B A Unit Ctn 100 Std Pkg 1000 WT/ 100 1 A B PIB50 Trade Size 1/2” 1.05 .36 PIB75 3/4” 100 500 2 1.29 .40 PIB100 1” 50 250 2 1.63 .49 PIB125 1-1/4” - 100 2 1.93 .48 PIB150 1-1/2” - 100 2 2.18 .48 PIB200 2” - 50 3 2.64 .54 PIB250 2-1/2” - 25 4 3.25 .63 PIB300 3” - 25 5 3.90 .68 PIB350 3-1/2” - 25 7 4.41 .68 PIB400 4” - 20 8 4.93 .68 PIB500 5” - 5 10 5.98 .77 PIB600 6” - 5 11 7.06 .77 Cat. # Compliances: For EMT Push In Plastic Bushings See Product Group Series EIB UL Listed 514B NEMA Standard FB Meets 2008 NEC Requirements for 300-15(c) Protection Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31131700 PG | AMFTGS.com © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ t: 800-221-5268 e: info@amftgs.com Specifications Subject to Change Without Notice 135 AMERICAN FITTINGS Corporation ® EMT Plastic Insulated Bushings Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: EIB Industial Plastic Insulated Threaded Bushings Use with EMT Tubing Push On Tubing End with Molded Stop Non-Grounding Material: Polypropylene Impact Resistant Color: Gunmetal Gray Temperature Rated at 105˚C EIB Series Plastic Push On EMT Bushing AMFICO EMT plastic insulating bushings offer maximum protection for cables to avoid damaging abrasion due to sharp EMT edges. Snap onto EMT tubing and they firmly hold and remain in place. Ideal for use in all environments where conductor integrity is of prime importance, such as tele-communication, data centers & security system installations. Made in the USA Bushings provide smooth, rounded surfaces at the ends of raceways and easily affixes to conduit. Will not Pull off during large size wire pulls. B A Cat. # C Trade Size Unit Ctn Std. Pkg g WT/100 A B EIB50 1/2” 100 1000 1 .558 .537 EIB75 3/4” 100 500 1 .743 .525 EIB100 1” 50 250 1 .945 .635 EIB125 1-1/4” 40 200 1 1.240 .625 EIB150 1-1/2” 40 200 2 1.440 .625 EIB200 2” - 50 2 1.870 .625 EIB250 2-1/2” - 25 4 2.240 1.230 EIB300 3” - 25 6 2.750 1.230 EIB350 3-1/2” - 20 7 3.340 1.110 EIB400 4” - 15 11 3.770 1.230 Compliances: Certified Made in the USA UL Listed 514B NEMA Standard FB Meets 2008 NEC Requirements for 300-15(c) Protection Federal Standard A-A-50553 CSA Standard: C22.2 No. 18F RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31131700 PG | For Rigid Threaded Plastic Bushings See Product Group Series PIB 136 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT One Hole Straps Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CSE - 1 Hole EMT Strap Material: Steel Construction Bright Electro Zinc Plated CSE Series Steel EMT Straps AMFICO Steel One Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Alignment of EMT is Quick and Easy. Made in the USA A C B Thickness .060” Cat # TRADE SIZE A LENGTH B HEIGHT C HOLE ID Unit Mstr. Wt. Ctn. Ctn. Per/C CSE501 CSE751 CSE1001 CSE1251 CSE1501 CSE2001 CSER2501 CSER3001 CSER3501 CSER4001 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-5/8" 1-7/8" 2-1/8" 2-3/4" 3" 3-3/4" 4-3/4" 5-3/8" 6" 6-1/2" 11/16" 15/16" 1-3/16" 1-1/2" 1-3/4" 2-3/16" 2-7/8" 3-1/2" 4" 4-1/2" 1/4" 1/4" 5/16" 3/8" 3/8" 7/16" 9/16" 9/16" 9/16" 9/16" 100 100 50 30 25 20 - Compliances: Certified Made in the USA Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31162310 - 1000 500 250 150 125 100 20 10 10 10 3 4 6 9 13 17 42 49 71 78 Available OPTIONS: 2 Hole Straps EMT and Rigid One-Hole BX Type Cat. # CSBX381 Unit Ctn Size 12-2, 12-3, 100 Std Pkg WT/ 100 1000 1 10-2, 10-3 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 137 AMERICAN FITTINGS Corporation ® Rigid Conduit One Hole Straps Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CSR - 1 Hole Rigid Conduit Strap Material: Steel Construction Bright Electro Zinc Plated CSR Series Steel RGS Straps AMFICO Steel One Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Alignment of Conduit is Quick and Easy. Made in the USA A C B Thickness .060” Cat # TRADE SIZE A LENGTH B HEIGHT C HOLE ID Unit Mstr. Wt. Ctn. Ctn. Per/C CSR501 CSR751 CSR1001 CSR1251 CSR1501 CSR2001 CSER2501 CSER3001 CSER3501 CSER4001 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1-5/8" 1-7/8" 2-1/8" 2-3/4" 3" 3-3/4" 4-3/4" 5-3/8" 6" 6-1/2" 11/16" 15/16" 1-3/16" 1-1/2" 1-3/4" 2-3/16" 2-7/8" 3-1/2" 4" 4-1/2" 1/4" 1/4" 5/16" 3/8" 3/8" 7/16" 9/16" 9/16" 9/16" 9/16" 100 100 50 30 25 20 - Compliances: Certified Made in the USA Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31162310 - 1000 500 250 150 125 100 20 10 10 10 3 4 6 9 13 17 42 49 71 78 Available OPTIONS: 2 Hole Straps EMT and Rigid One-Hole BX Type Cat. # CSBX381 Unit Ctn Size 12-2, 12-3, 100 Std Pkg WT/ 100 1000 1 10-2, 10-3 PG | AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 138 AMERICAN FITTINGS Corporation ® EMT Two Hole Straps Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CSE - 2 Hole EMT Strap Material: Steel Construction Bright Electro Zinc Plated CSE Series EMT Steel Straps AMFICO Steel Two Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Alignment of EMT is Quick and Easy. Made in the USA C B D Thickness .060” A Cat # TRADE SIZE A LENGTH B HEIGHT CSE502 CSE752 CSE1002 CSE1252 CSE1502 CSE2002 CSER2502 CSER3002 CSER3502 CSER4002 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-1/4" 2-5/8" 3-1/4" 4" 4-1/4" 5-1/8" 5-7/8" 6-1/2" 7/1/8" 7-3/4" 13/16" 1-1/16" 1-5/16" 1-11/16" 1-7/8" 2-3/8" 2-7/8" 3-1/2" 4" 4-1/2" Compliances: Certified Made in the USA Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31162310 C HOLE ID 3/16" 3/16" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 7/16" 7/16" HOLE SPACING Wt. Per/C 1-13/16" 2-3/16" 2-9/16" 3-3/16" 3-3/8" 4-1/4" 5" 5-1/2" 6-3/16" 6-13/16" 2 3 5 7 12 15 17 23 26 33 Unit Mstr. Ctn. Ctn. 100 100 50 30 25 20 - 1000 500 250 150 125 75 20 10 10 10 Available OPTIONS: 1 Hole Straps EMT and Rigid One-Hole BX Type Cat. # CSBX381 Unit Ctn Size 12-2, 12-3, 100 Std Pkg WT/ 100 1000 1 10-2, 10-3 PG | 139 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Rigid Conduit Two Hole Straps Since 1946 Industrial SPEC-grade Size Range: 1/2” - 4” Product Series: CSR - 2 Hole Rigid Conduit Strap Material: Steel Construction Bright Electro Zinc Plated CSR Series RGS Steel Straps AMFICO Steel Two Hole Straps Snap On to the Conduit Allowing the Installer to Easily Position the Strap Prior to Mounting. Alignment of Conduit is Quick and Easy. Made in the USA C B D A Cat # TRADE SIZE A LENGTH B HEIGHT CSR502 CSR752 CSR1002 CSR1252 CSR1502 CSR2002 CSER2502 CSER3002 CSER3502 CSER4002 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 2-1/4" 2-5/8" 3-1/4" 4" 4-1/4" 5-1/8" 5-7/8" 6-1/2" 7/1/8" 7-3/4" 13/16" 1-1/16" 1-5/16" 1-11/16" 1-7/8" 2-3/8" 2-7/8" 3-1/2" 4" 4-1/2" Compliances: Certified Made in the USA Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 31162310 C HOLE ID 3/16" 3/16" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 7/16" 7/16" HOLE SPACING Wt. Per/C 1-13/16" 2-3/16" 2-9/16" 3-3/16" 3-3/8" 4-1/4" 5" 5-1/2" 6-3/16" 6-13/16" 2 3 5 7 12 15 17 23 26 33 Unit Mstr. Ctn. Ctn. 100 100 50 30 25 20 - 1000 500 250 150 125 75 20 10 10 10 Available OPTIONS: 1 Hole Straps EMT and Rigid One-Hole BX Type Cat. # CSBX381 Unit Ctn Size 12-2, 12-3, 100 Std Pkg WT/ 100 1000 1 10-2, 10-3 PG | 140 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Hanger Bolted for EMT and Rigid Since 1946 Size Range: 1/2” - 4 ” (0 - 9) Product Series: CHB Bolted Hanger Support Material: Steel Construction Bright Electro Zinc Plated Industrial SPEC-grade Made in the USA Conduit Hangers With Attached Nut And Bolt Securely Connect EMT or Rigid /IMC Conduit Directly To Mounting Surface. Threaded Bolt Features Slotted Phillips Head and Nut. Chb Series 3 Holes Bolted Hangers AMFICO Steel 3 Hole Conduit Hanger Bolts And Clamps Onto The Conduit Bolt On with Mounting Hole Suitable to Attach to a Traditional Beam Clamp Furnished with Steel Threaded Bolt and Nut C A B Cat # Trade Size Rigid CHB0US CHB1US CHB2US CHB25US CHB3US CHB4US CHB5US CHB6US CHB7US CHB8US CHB9US 0 1 2 2-1/2 3 4 5 6 7 8 9 3/8"-1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" EMT 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" A B C 13/16” 1” 1-3/16” 1-1/2” 1-3/4” 1-7/8” 2-1/4” 2-7/8” 3-1/2” 4” 4-1/2” 1-7/8” 2-1/8” 2-7/16” 2-3/4” 2-7/8” 3-1/4” 3-7/8” 4-5/8” 5-1/2” 5-3/4” 6-1/4” 3/4” 3/4” 7/8” 7/8” 7/8” 1” 1” 1-1/8” 1-3/16” 1-1/4” 1-1/4” Compliances: Certified Made in the USA UL Listed 2239 Indoor or Outdoor Use RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121701 PG | AMFTGS.com Wt. / Std. Mstr. C Carton Carton 7 7 8 11 11 19 22 28 31 32 37 50 50 250 250 25 20 125 100 100 50 50 25 20 10 10 20 10 10 - Available OPTIONS: 1 Hole and 2 Hole Straps for EMT and Rigid Conduit t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 141 AMERICAN FITTINGS Corporation ® EMT & Rigid Conduit Brace Since 1946 Industrial SPEC-grade A Complete Out of the Box Bracing or Conduit Sleeve Solution - “Just Add Your Conduit” Uni-BRACE ™ Wall Pentration Sleeve and Conduit Brace Fully Supports Conduit and Prohibits Conduit from Moving Integrated Alloy Steel Zinc Plated Escutcheon Plate Smooth ID & Rounded Edges Provides a Fast and Safe Wire Pull No Bushing Required RainTight Option Available Sealing Ring and Gasket Precision Machined Threads on Connector Body & Nut Patented Compression Ring 1” to 4” Compression Fittings Are Rated & Listed by UL for Use on Either EMT & Rigid Conduit Steel Construction, Zinc Plated, Chromate Compression Connector Flat Wrenching Surface, Accomodates Channel Lock to Wrench Secure No Need to Disassemble, Simply Loosen Nut and Slide on Conduit Once Tighted, Competely Braces and Secures Conduit from Forward, Backward & Lateral Movement Fully Machined ID to Assist and Provide a Fast & Easy Wire Pull NEVER a Burr or Edge Secures Conduit Against Wall or Structure While Fully Compressing on Conduit Low Profile, Modern Design to Blend with Conduit Single ByPass Wall Full Dual Bracing with 2 Units Precision Machined Steel Threads EZ-Torque™ Design Exploded View of Compression Feature Uni-BRACE ™ Locks Tight & Right, Can be Removed and Repositioned Use in Vertical Runs As a Floor or Ceiling Sleeve and Securing Conduit Use Two Units to Fully Brace Conduit On Both Multiple Pass Throughs Fully Secure and Brace Single Length or Extended Conduit Runs No Need to Thread Conduit Designed & Manufactured in the USA by AMERICAN FITTINGS Corporation Expand Your Runs Gain Bracing While Locking Your Conduit in Place 142 AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® EMT & Rigid Conduit Brace Since 1946 Industrial SPEC-grade Uni-BRACE ™ Wall Pentration Sleeve and Conduit Brace Size Range: 1” to 4 ” Alloy Steel Featuring: Connector Body & Compression Nut Machined from Solid Alloy Steel Bar Stock Zinc Plated with Chromate Finish *** 2-1/2 “ through 4” Compression Fittings are UL Listed & Approved for Both EMT & Rigid Conduit * EMT, Rigid and IMC Conduit * Flat Hex Surfaces for Full and EZ-Torque™ Fully Precisioned Machine Cut Threads Galvanized Plating Option Available ** Conduit Brace and Wall Sleeve Can Be Used for EMT and Rigid Conduit on Internal & External Walls, & Enclosure, Boxes Locks Your Conduit in Place on Single or Both Ends of Walls, Ceilings. or Floors Fully Supports and Braces Conduit Loads Provides Supports Where Straps and Hangers Cannot be Used Creates and Seals Entry Through Holes Provides a Finished Look to Conduit Run in Public Areas US Patented Design A Patented D B C E Save Time & Money No Need to Thread Rigid Conduit Provides Full Support and Bracing No Need to Cut Pipe for Pass-Through Walls, Run Full Lenght of Pipe CAT # Trade Size A Length B Hex ERCB100 ERCB200 ERCB250 ERCB300 ERCB350 ERCB400 1" * 2" * 2-1/2" 3" 3-1/2" 4" 1-1/16" 1-3/8" 1-5/16" 1-7/16" 1-7/16" 1-11/16" 1-7/16" 2-9/16" 3-1/4" 3-15/16" 4-7/16" 4-15/16" * 1” and 2” rated for EMT Compliances: D C Outer Diameter Diameter 1-1/2" 2-1/16" 2-11/16" 3-3/8" 3-3/8" 4" 4" 4-9/16" 4-9/16" 5-1/8" 5-1/16" 6-1/2" Only Consult Factory for Other Sizes E Brace Thickness 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" Wt. Per/C 18 45 60 78 80 183 Dimensions shown are + 1/16” - 1/32” *** Plating Options: Galvanized Plating Option: Add suffix “G” to cat #’ Certified Made in the USA Uni-BRACE™ Can Be Color Coded Compression Fittings Are UL Listed QUICKLY IDENTIFY CRITICAL SYSTEMS Acts as a Fire Stop When Used with UL Rated Fire Stop Putty Seal or Fire alarms, security systems, fiber optics, Conduit Wrap * high- and low-voltage circuits, data circuit with Rated Mil-STD 810 Sinusoidal Virbration Test Color Coded Uni-BRACE™ for Your Federal Standard A-A-50553 Thru-the-Wall Sleeves and Conduit Runs. Compression Fittings Comply to UL Standards: 514B, 467 CA Prop.65 Compliance * Fire Stop Ratings and Code Requirements are strictly left to the installer and design firm.. RoHS Compliant AMFTGS.com t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ 143 e: info@amftgs.com Specifications Subject to Change Without Notice AMERICAN FITTINGS Corporation ® Pulling Grips - Junior Since 1946 Industrial SPEC-grade PJ Series Steel Single Eye Galvanized Steel Mesh Made in the USA PJ Series -Pulling Grips serve as reusable tools for light industrial pulling of electrical cable or wire and for underground and industrial plant wiring and re-wiring. PJ Series – “Junior-Duty” Pulling Grips are designed for electricians with smaller job requirements. They are used to connect insulated-wire bundles to pulling tape or to pull wire rope through the conduit. Junior (Light)-duty pulling grips are the most economical pulling grips for many applications, such as industrial-plant wiring, rewiring, and underground electrical pulls A B Cat # Min Max PJ024 PJ036 PJ049 PJ061 PJ074 PJ099 PJ125 PJK-1 (KIT) .19 .25 .34 .50 .62 .75 1.00 .25 .24 .36 .49 .61 .74 .99 1.25 1.25 Compliances: Certified Made in the USA AMFTGS.com Wt. Per/C 2 2 3 6 10 15 23 85 Features: Material Construction: Steel, Galvanized Designed for use indoor use only. UL Listed RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121722 PG | A B EYE LENGTH MESH LENGTH Std. Pkg 1/2" 4-1/2" 1 1/2" 7" 1 1/2" 10-1/8" 1 1/2" 11-3/4" 1 1/2" 13-1/4" 1 3/4" 14" 1 3/4" 15-7/8" 1 1 Two Year Warranty t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 144 SS Series Steel Single Eye Zinc Plated Steel FITTINGS Corporation AMERICAN ® Made in the USA Bus Drop Safety Springs 40# and 80# Load Capacity Since 1946 Industrial SPEC-grade Safety Springs are Used with Bus-Drop Grips to Relieve Sudden Strains on the Cable System SS Series Safety Springs are Used with Bus-Drop Grips to Relieve Sudden Strains on the Cable System Use with Single Eye-Type Grips, Disassemble Drawbar from Coil, Place Through the Eye and Replace the Drawbar/ Closed mesh top-mounted reinforced eye protector provides stable and longer-life support. Galvanized Steel wire mesh is for indoor use only SAFETY SPRINGS CAN BE USED WITH SINGLE-EYE TYPE GRIPS To use Safety Springs with single-eye type grips, disassemble the drawbar from the coil, placing it through the eye and replacing the drawbar. Cat # SS40 SS80 Max. Load* 40 lbs. 80 lbs. Length 8-1/4 8-1/4 Dia. 3/4” 1.00” Std. Package 10 10 Wt. per/c 15 32 * Maximum Working Load Level Compliances: Certified Made in the USA Features: Material Construction: Steel, Zinc Plated Designed for use indoor use only. UL Listed RoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121722 PG | AMFTGS.com Two Year Warranty t: 800-221-5268 © Copyright 2020 AMERICAN FITTINGS Corporation Fair Lawn, NJ e: info@amftgs.com Specifications Subject to Change Without Notice 145 AMERICAN AMERICAN FITTINGS Corporation SPEC-grade Industrial Electrical Fittings Better Products, Better Ideas, Better Value, Think AMERICAN Agriculture Alternative Energy Data Centers Federal & State Projects Food Processing & Production Hospitals and Medical Centers Industrial Applications ® Infrastructure Construction Military Bases OEM Equipment Oil & Gas Projects Paper & Pulp Transportation Waste Water Treatment ® Innovating the Next Generation of Electrical Fittings Founded in 1946, a family owned and operated, 3rd generation business, we have grown into the world’s largest manufacturer of alloy steel electrical fittings. Headquarterd in New Jersey, all products are sold exclusively through Authorized Stocking Distributors. Our products are made in the USA, and they will exceed your requirements and expectations, not your budget. We never apologize why our products are made in America; we suggest you ask our competitors “why they don’t”! Random lot shipping inspection in a foreign country can never replace integrity manufactured into raw materials and manufacturing in this country. Don’t consider us as just a government project supplier, consider us as your fitting supplier for all types of projects. Who says, integrity and quality of products have to be expensive? Discover our product differentiators, reduction in your installation time, and improvement in your application. . . We Guarantee It! When You At the Top. . . Failure is Not An Option! Think AMERICAN Sold Exclusively Through Authorized Distributors We Are the ONLY Manufacturer of a Full Range of Steel Electrical Fittings Made in the USA Manufacturing and Corporate Offices AMERICAN FITTINGS Corporation 17-10 Willow Street Fair Lawn, NJ 07410 t: 800.221.5268 | f: 201.664.1175 Online: amftgs.com e: info@amftgs.com Quality has one name, AMERICAN TM 146 © Copyright 2020 AMERICAN FITTINGs Corp.