ELEKTROMATEN® Operators and Accessories Quality Made in Germany GfA-ELEKTROMATEN Australia Pty Ltd Office: Unit 16 / 380 Eastern Valley Way Chatswood NSW, 2067 Postal Address: GfA-ELEKTROMATEN Australia Pty Ltd P.O. Box 267 Roseville 2069 NSW Telephone: 02 9882 2782 Facsimile: 02 9882 2783 Email: sales@gfa-elektromaten.net Web: Subject to measurement and design revisions. www.gfa-elektromaten.de Page 0.1 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Operators and Accessories Quality Made in Germany Safedrive® ELEKTROMATEN® – SI For non-balanced roller shutters and grills Page 1.1 1.2 Safedrive® ELEKTROMATEN® – SI-FI For non-balanced roller shutters and grills which require particularly smooth and fast operation Page 1.9 2.1 Chaindrive ELEKTROMATEN® – KE For balanced roller doors, roller shutters and grills Page 2.1 2.2 Chaindrive ELEKTROMATEN® – KE For non-balanced roller shutters and grills Contact GfA 3.1 Sectional Door Drive ELEKTROMATEN® – SE For balanced Sectional Doors Page 3.1 3.3 Fold-Up Door Drive ELEKTROMATEN® – FO For balanced Fold-Up Doors Contact GfA 4 Sliding Door ELEKTROMATEN® – ST For Sliding Gates Contact GfA 5.1 Fire Shutter ELEKTROMATEN® – FS For Partially Balanced Fire Shutters Contact GfA 5.2 Fire Shutter ELEKTROMATEN® – FS For Non-balanced Fire Shutters Contact GfA 6 Safety Brakes For Doors which require a separate Safety Brake Contact GfA 7 Controller / Controller Upgrade Kits/Safety Kits For Operators with Mechanical Limits and Digital Limits Page 7.1 8 Accessories Electrical Mechanical 1.1 with integrated Safety Brake (patented) with soft start/ soft stop and integrated Safety Brake (patented) (Balanced) (Non-Balanced) (Balanced) (Non-Balanced) Emergency Chain Extensions & Activators............................................................ Page 8.1 Mounting Brackets for Chain Drive Operators ....................................................... Page 8.1 Chains & Sprockets................................................................................................... Page 8.1 Chain Drive Operators............................................................................................... Page 8.2 Control Panels and Cables for Chain Drive Operators with Mechanical Limits . Page 8.2 Mounting Brackets, Shafts & Discs for Safedrive® Operators ............................. Page 8.3 Bearings...................................................................................................................... Page 8.4 Control Panels and Cables for Operators with Digital Limits ............................... Page 8.4 Push Buttons and Key Switches for All Operators ................................................ Page 8.5 PE Beams.................................................................................................................... Page 8.6 Remote Controls for TS 961 / TS 970 / TS 981 Control Panels.............................. Page 8.6 Warning and Traffic Lights ....................................................................................... Page 8.7 Safety Edges and Safety Switches .......................................................................... Page 8.7 Battery Backups......................................................................................................... Page 8.8 Subject to measurement and design revisions. Page 0.2 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Safedrive® Kits For Non-Balanced Roller Shutter Safedrive Operators with Integrated Safety Brake . Subject to measurement and design revisions. Page 1.1 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Safedrive® Kits Features GFA-Safedrive® Features: High Quality Products Made in Germany Australian Sales and Support Office Integrated, patented Safety Brake – reduces the risk of shutter free fall Compact, Efficient, Robust Operators All Operators are suitable for Left or Right Hand - simplifies installation All 3-phase Operators are high cycle rated – eliminates the need for special orders Integrated Overload and Safety Circuit - protects users and doors Digital Limits provide additional features such as “limit setting from the ground” and over-travel monitoring Kits with TS 970 logic control are the ideal solution for car park operators. The TS 970 is “Safety Edge” ready – this allows simple installation of our safety edge kits Accessories are available . Subject to measurement and design revisions. Page 1.2 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Compact Safedrive® Kits Quick Reference Guide for Non-Balanced Roller Shutters Single Phase - Operator Kits for Non-Balanced Roller Shutters Power Supply Lifting Capacity 1 x 240 V 135kg @ 168Ø 159kg @ 168 Ø 198kg @ 168Ø 318kg @ 168Ø Push Button Control Logic Control Logic Control with Variable Speed Drive SI63 17.60-FI - TS970 AU110104 Description Part Number SIK 20.12 - TS958 SIK 20.12 - TS970 Part Number AU110028 AU110027 Description SI 25.15-WS - TS958 SI 25.15-WS - TS970 SI 25.60-FI - TS970 AU110020 AU110019 AU110112 Description Part Number SI 40.40-FI - TS970 Description AU110106 Part Number Three Phase - Operator Kits for Non-Balanced Roller Shutters Power Supply Lifting Capacity Logic Control Logic Control with Variable Speed Drive Part Number SIK 23.12 - TS958 AU110032 SIK 23.12 - TS970 AU110031 Description SI 25.15 - TS958 SI 25.15 - TS970 SI 25.60-FI - TS970 Part Number AU110002 AU110001 AU110112 Description SI 40.15 - TS958 SI 40.15 - TS970 SI 40.40-FI - TS970 Part Number AU110006 AU110005 AU110106 Description SI 55.15 - TS958 SI 55.15 - TS970 SI 55.40-FI - TS970 Part Number AU110008 AU110007 AU110110 595kg @ 168Ø 481kg @ 219Ø Description SI 75.15 - TS 958 SI 75.15 - TS970 SI 75.45-FI - TS970 Part Number AU110012 AU110011 AU110113 794kg @ Ø168 641kg @ Ø219 Description SI 100.10 - TS958 SI 100.10 - TS970 AU110014 AU110013 SI 100.30 FI – TS 970 Part Number 1111kg @ Ø168 898kg @ Ø219 Description SI 140.07 - TS958 SI 140.07 - TS970 SI 140.20-FI TS970 Part Number AU110016 AU110015 AU110117 1429kg @ 168 1154kg @ 219Ø Description SI 180.06 - TS958 SI 180.06 - TS970 AU110022 AU110021 SI 180.12 FI – TS 970 183kg @ 168Ø 198kg @ 168Ø 318kg @ 168Ø 3 x 415 V Push Button Control 437kg @ 168Ø Description Part Number AU110122 AU110123 = Not Available NOTE: Lifting forces are calculated for 23mm single-wall profiles and friction of 20% Lifting force may change during roll up (depending on the proportion of the door width to door height and tube diameter) Reduce the lifting force by 20% for vertically lifted doors and insulated shutters with double wall thickness and/or deep sections 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.3 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Compact Safedrive® Kits Quick Reference Guide for Non-Balanced Roller Shutters Compact Safedrive® SIK 20.12 (200 Nm) / 240 V / High Cycle Rated 1 Lifting Force : 159 kg @ Ø168 drum / SG63F-SIK Gearbox Item Number: Description Control AU110028 SIK 20.12 – TS 958 TS 958 Push Button Control AU110027 SIK 20.12 – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Ø30 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 200 Nm Motor Power 0.40 kW Motor Duty Cycle HCR / 40% Output Speed 12 RPM Supply Voltage 240 V Limit Switch, Range / Qty 20 Hollow Shaft Ø30 mm Nominal current 5.4 A Limits digital Locking Torque 510 Nm Motor Protection IP 54 Weight 19 kg Compact Safedrive® SIK 23.12 (230 Nm) - 415V / High Cycle Rated 1 Lifting Force : 183 kg @ Ø168 drum / SG63F-SIK Gearbox Item Number: Description Control AU110032 SIK 23.12 – TS 958 TS 958 Push Button Control AU110031 SIK 23.12 – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Ø30 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 230 Nm Motor Power 0.4 kW Motor Duty Cycle HCR / 60% Output Speed 12 RPM Supply Voltage 415 V Limit Switch, Range / Qty 20 Hollow Shaft Ø30 mm Nominal current 1.6 A Limits digital Locking Torque 510 Nm Motor Protection IP 54 Weight 19 kg 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.4 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Safedrive® Kits For Non-Balanced Roller Shutter and Grilles Safedrive® SI 25.15 (250 Nm) / 240 V / High Cycle Rated 1 Lifting Force : 198 kg @ Ø168 drum / SG85F Gearbox Item Number: Description Control AU110020 SI 25.15 – TS 958 TS 958 Push Button Control AU110019 SI 25.15 – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Ø 40 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 250 Nm Motor Power 0.75 kW Motor Duty Cycle HCR / 40% Output Speed 15 RPM Supply Voltage 240 V Limit Switch, Range 20 Hollow Shaft Ø40 mm Nominal current 8A Limits digital Locking Torque 635 Nm Motor Protection IP 54 Weight 30 kg Safedrive® SI 25.15 (250 Nm) / 415V / High Cycle Rated 1 Lifting Force : 198 kg @ Ø168 drum / SG85F Gearbox Item Number: Description Control AU110002 SI 25.15 – TS 958 TS 958 Push Button Control AU110001 SI 25.15 – TS 970 TS 970 Logic Control AU110001-PR SI 25.15 – TS 970-PR TS 970 Logic Control with PE & Remote Integrated Safety Brake Each kit includes: Operator with Ø40 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5 m Connection Cable Car Park Kit additionally includes: PE Beam, Remote Control Receiver, 2 x Remote Control Transmitter Technical Data: Output Torque 250 Nm Motor Power 0.4 kW Motor Duty Cycle HCR / 60% Output Speed 15 RPM Supply Voltage 415 V Limit Switch, Range 20 Hollow Shaft Ø40 mm Nominal current 1.8 A Limits digital Locking Torque 635 Nm Motor Protection IP 54 Weight 25 kg 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.5 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Safedrive® Kits For Non-Balanced Roller Shutter and Grilles Safedrive® SI 40.15 (400 Nm) / 415V High Cycle Rated 1 Lifting Force : 318 kg @ Ø168 drum / SG85F Gearbox Item Number: Description Control AU110006 SI 40.15 – TS 958 TS 958 Push Button Control AU110005 SI 40.15 – TS 970 TS 970 Logic Control AU110005-PR SI 40.15 – TS 970-PR TS 970 Logic Control with PE & Remote Integrated Safety Brake Each kit includes: Operator with Ø40 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5 m Connection Cable Car Park Kit additionally includes: PE Beam, Remote Control Receiver, 2 x Remote Control Transmitter Technical Data: Output Torque 400 Nm Motor Power 1.1 kW Motor Duty Cycle HCR / 60% Output Speed 15 RPM Supply Voltage 415 V Limit Switch, Range 20 Hollow Shaft Ø40 mm Nominal current 2.7 A Limits digital Locking Torque 1020 Nm Motor Protection IP 54 Weight 32 kg Safedrive® SI 55.15 (550 Nm) / 415 V / High Cycle Rated 1 Lifting Force : 437 kg @ Ø168 drum / SG85F Gearbox Item Number: Description Control AU110008 SI 55.15 – TS 958 TS 958 Push Button Control AU110007 SI 55.15 – TS 970 TS 970 Logic Control AU110007-PR SI 55.15 – TS 970-PR TS 970 Logic Control with PE & Remote Integrated Safety Brake Each kit includes: Operator with Ø40 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Car Park Kit additionally includes: PE Beam, Remote Control Receiver, 2 x Remote Control Transmitter Technical Data: Output Torque 550 Nm Motor Power 1.1 kW Motor Duty Cycle HCR / 60% Output Speed 15 RPM Supply Voltage 415 V Limit Switch, Range 20 Hollow Shaft Ø40 mm Nominal current 4.2 A Limits digital Locking Torque 1400 Nm Motor Protection IP 54 Weight 34 kg 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.6 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Safedrive® Kits For Non-Balanced Roller Shutter and Grilles Safedrive® SI 75.15 (750 Nm) /415 V / High Cycle Rated 1 Lifting Force : 595 kg @ Ø168 drum, 481 kg @ Ø219 drum SG115F Gearbox Item Number: Description Control AU110012 SI 75.15 – TS 958 TS 958 AU110011 SI 75.15 – TS 970 TS 970 - Logic Integrated Safety Brake Each kit includes: Operator with Ø55 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 750 Nm Motor Power 1.10 kW Motor Duty Cycle HCR / 60% Output Speed 15 RPM Supply Voltage 415 V Limit Switch, Range 20 Hollow Shaft Ø55 mm Nominal current 4.1 A Limits digital Locking Torque 2840 Nm Motor Protection IP 54 Weight 53 kg Safedrive® SI 100.10 (1000 Nm) / 415 V / High Cycle Rated Lifting Force1: 794 kg @ Ø168 drum, 641 kg @ Ø219 drum SG115F Gearbox Item Number: Description Control AU110014 SI 100.10 – TS 958 TS 958 AU110013 SI 100.10 – TS 970 TS 970 - Logic Integrated Safety Brake Each kit includes: Operator with Ø55 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 1000 Nm Motor Power 1.30 kW Motor Duty Cycle HCR / 60% Output Speed 10 RPM Supply Voltage 415 V Limit Switch, Range 20 Hollow Shaft Ø55 mm Nominal current 6.5 A Limits digital Locking Torque 2840 Nm Motor Protection IP 54 Weight 55 kg 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.7 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Safedrive® Kits For Non-Balanced Roller Shutter and Grilles Safedrive® SI 140.7 (1400 Nm) / 415 V / High Cycle Rated 1 Lifting Force : 1111 kg @ Ø168 drum, 898 kg @ Ø219 drum SG115F Gearbox Item Number: Description Control AU110016 SI 140.7 – TS 958 TS 958 Push Button Control AU110015 SI 140.7 – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Ø55 mm Output Shaft, Hauling chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 1400 Nm Motor Power 1.1 kW Motor Duty Cycle HCR / 60% Output Speed 7 RPM Supply Voltage 415 V Limit Switch, Range 20 Hollow Shaft Ø55 mm Nominal current 4.1 A Limits digital Locking Torque 2840 Nm Motor Protection IP 54 Weight 60 kg Safedrive SI 180.6 (1800 Nm) / 415 V / High Cycle Rated 1 Lifting Force : 1429 kg @ Ø168 drum, 1154 kg @ Ø219 drum SG115F Gearbox Item Number: Description Control AU110022 SI 180.6 – TS 958 T 958 Push Button Control AU110021 SI 180.6 – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Ø60 mm Hollow Shaft, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 1800 Nm Motor Power 1.3 kW Motor Duty Cycle HCR / 40% Output Speed 6 RPM Supply Voltage 415 V Limit Switch, Range 20 Hollow Shaft Ø60 mm Nominal current 6.5 A Limits digital Locking Torque 2840 Nm Motor Protection IP 54 Weight 63 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.8 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Rapid-Safedrive® Kits With build-in Inverter and Soft Start/Soft Stop For Non-Balanced Roller Shutter and Grilles Variable Speed Drives for superior performance Recommended for Car Park Applications ... Further to the standard Safedrive Benefits the Rapid Safedrive offer: Soft Start / Soft Stop Adjustable Speeds Easy to commission Efficient & economical . Subject to measurement and design revisions. Page 1.9 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Rapid-Safedrive® Kits With build-in Inverter and Soft Start/Soft Stop For Non-Balanced Roller Shutter and Grilles Variable Speed Safedrive® SI63 17.60 (170 Nm) / 240V / High Cycle Rated 1 Lifting Force : 135 kg @ Ø168 drum / SG63F Gearbox Item Number: Description Control AU110104 SI63 17.60 FI – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Integrated Inverter, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 170 Nm Output Speed 8-60 RPM Hollow Shaft Ø25.4 mm Locking Torque 873 Motor Power Supply Voltage Motor Protection 0.85 kW 240 V IP 54 Motor Duty Cycle Limit Switch, Range HCR / 40% 3) 20 Limits digital Weight 25 kg Variable Speed Safedrive® S25.60 (250 Nm) / 240V / High Cycle Rated 1 Lifting Force : 183 kg @ Ø168 drum / SG85F Gearbox Item Number: Description Control AU110112 SI 25.60 FI – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Integrated Inverter, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 250 Nm Motor Power 1.5 kW Motor Duty Cycle HCR / 40% Output Speed 10-60 RPM Supply Voltage 240 V Limit Switch, Range 3) 20 Hollow Shaft Ø40 mm Limits digital Locking Torque 1020 Nm Weight 38 kg Motor Protection IP 54 Variable Speed Safedrive® SI 40.40 (400 Nm) / 240 V / High Cycle Rated 1 Lifting Force : 318 kg @ Ø168 drum / SG85F Gearbox Item Number: Description Control AU110106 SI 40.40 FI - TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Integrated Inverter, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 400 Nm Output Speed 9-40 RPM Hollow Shaft Ø40 mm Locking Torque 1020 Nm Motor Power Supply Voltage Motor Protection 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.10 12/2011 A 1.5 kW 240 V IP 54 Motor Duty Cycle Limit Switch, Range HCR / 50% 3) 20 Limits digital Weight 38 kg GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Rapid-Safedrive® Kits With build-in Inverter and Soft Start/Soft Stop For Non-Balanced Roller Shutter and Grilles Variable Speed Safedrive® SI 55.40 (550 Nm) / 415 V / High Cycle Rated 1 Lifting Force : 437 kg @ Ø168 drum / SG 85F Gearbox Item Number: Description Control AU110110 SI 55.40 FI - TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Integrated Inverter, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 550 Nm Output Speed 8-40 RPM Hollow Shaft Ø40 mm Locking Torque 1400 Nm Motor Power Supply Voltage Motor Protection 4.5 kW 415 V IP 54 Motor Duty Cycle Limit Switch, Range HCR / 30% 3) 20 Limits digital Weight 46 kg Variable Speed Safedrive® SI 75.45 (750 Nm) / 415 V / High Cycle Rated 1 Lifting Force : 595 kg @ Ø168 drum, 481 kg @ Ø219 drum / SG115F Gearbox Item Number: Description Control AU110113 SI 75.45 FI – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Integrated Inverter, Hauling Chain Mechanism, Controller, Connection Cable Technical Data: Output Torque 750 Nm Motor Power 4.5 kW Motor Duty Cycle HCR / 50% Output Speed 8-45 RPM Supply Voltage 415 V Limit Switch, Range 3) 20 Hollow Shaft Ø55 mm Limits digital Locking Torque 2840 Nm Weight 62 kg Motor Protection IP 54 Variable Speed Safedrive® SI 100.30 (100 Nm) / 415 V / High Cycle Rated 1 Lifting Force : 794 kg @ Ø168 drum, 641 kg @ Ø219 drum / SG115F Gearbox Item Number: Description Control AU110122 SI 100.30 FI – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Integrated Inverter, Hauling Chain Mechanism, Controller, Connection Cable Technical Data: Output Torque 1000 Nm Motor Power 4.5 kW Motor Duty Cycle HCR / 40% Output Speed 5-30 RPM Supply Voltage 415 V Limit Switch, Range 3) 20 Hollow Shaft Ø55 mm Limits Digital Locking Torque 2840 Nm Weight 70 kg Motor Protection 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.11 12/2011 A IP 54 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Rapid-Safedrive® Kits With build-in Inverter and Soft Start/Soft Stop For Non-Balanced Roller Shutter and Grilles Variable Speed Safedrive® SI 140.20 (1400 Nm) / 415V / High Cycle Rated 1 Lifting Force : 1111 kg @ Ø168 drum, 898 kg @ Ø219 drum / SG115F Gearbox Item Number: Description Control AU110117 SI 140.20 FI – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Integrated Inverter, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 1400 Nm Output Speed 5-20 RPM Hollow Shaft Ø55 mm Locking Torque 2840 Nm Motor Power Supply Voltage Motor Protection 4.5 kW 415 V IP 54 Motor Duty Cycle Limit Switch, Range HCR / 40% 3) 20 Limits Digital Weight 70 kg Variable Speed Safedrive® SI 180.12 (1800 Nm) / 415V / High Cycle Rated 1 Lifting Force : 1492 kg @ Ø168 drum, 1154 kg @ Ø219 drum / SG115F Gearbox Item Number: Description Control AU110123 SI 180.12 FI – TS 970 TS 970 Logic Control Integrated Safety Brake Each kit includes: Operator with Integrated Inverter, Hauling Chain Mechanism, Controller, 5 m Connection Cable Technical Data: Output Torque 1800 Nm Motor Power 4.5 kW Motor Duty Cycle HCR / 40% Output Speed 5-12 RPM Supply Voltage 415 V Limit Switch, Range 3) 20 Hollow Shaft Ø60 mm Limits digital Locking Torque 2840 Nm Weight 70 kg Motor Protection 1) Lifting forces are calculated for 23mm single-wall profiles and friction of 20% For full product details refer to our online catalogue or contact our sales office. . Subject to measurement and design revisions. Page 1.12 12/2011 A IP 54 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Chain Drive Operator Kits For Balanced Roller Shutters and Roller Doors Subject to measurement and design revisions. Page 2.1 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Chain Drive Operator Kits Introduction GFA-Chain Drive Features: High Quality Products Made in Germany Australian Sales & Support Office Compact, Efficient, Robust Operators All Operators are suitable for Left or Right Hand - removable output shaft can be reversed to change handing All 3-phase Operators are high cycle rated “Horizontal” or “Vertical” installation is possible – provides additional flexibility Integrated Overload and Safety Circuit - protects users and doors Standard Operators are Water Jet Proof (IP 65) when Hard Wired – eliminates the need for special operators Pre-Wired Solutions Available – for easy installation All 3 Phase Operators can be Wired with or without Neutral Supply Accessories are available Subject to measurement and design revisions. Page 2.2 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Chain Drive Operator Kits Quick Reference Guide for Balanced Roller Shutters Single Phase - Operator Kits for Balanced Roller Shutter Power Supply Door Area (Balanced) 0.5 HP-EQ 22 m² 1 x 240V 1.0 HP-EQ 40 m² Push Button Control – Economy1 Logic Control Description TKE 5.24 -WS - T801 KE 5.24 - TS961 Part Number AU21015 AU21030 Logic Control with Variable Speed Drive Pre-Wired Description Part Number TKE 9.24 -WS - T801 KE 9.24-WS - TS956 KE 9.24-WS - TS961 KE 14.80-FI - TS 970 AU21022 AU21008 AU21006 Pre-Wired Pre-Wired Pre-Wired AU21034 Description KE 14.80-FI - TS 970 Part Number AU21034 Description KE 17.60-FI - TS 970 Part Number AU210033 Description KE 40.40-FI - TS970 Part Number AU220101 1.5 HP EQ 50 m² 2.0 HP-EQ 60 m² 80 m² Push Button Control Three Phase - Operator Kits for Balanced Roller Shutter Power Supply Door Area (Balanced) 0.5 HP-EQ 22 m² 3 x 415V 1.0 HP-EQ 40 m² 1.5 HP EQ 50 m² 2.0 HP-EQ 60 m² 80 m² Push Button Control – Economy2 Push Button Control Logic Control Logic Control with Variable Speed Drive Description KE 6.65-DU - TS970 Part Number AU21035 Description KE 9.24 - TS 503 KE 9.24 - TS956 KE 9.24 - TS961 KE 14.80-FI - TS 970 Part Number AU21003 AU21020 AU21000 AU21034 Description KE 14.21 - TS 503 KE 14.21 - TS956 KE 14.21 - TS961 KE 14.80-FI - TS 970 Part Number AU21025 AU21026 AU21027 AU21034 Description KE 17.24 - TS 503 KE 17.24 - TS956 KE 17.24 - TS961 KE 17.60-FI - TS 970 Part Number AU21005 AU21021 AU21007 AU210033 Description KE 40.24 - TS958 KE 40.24 - TS970 KE 40.40-FI - TS970 Part Number AU21023 AU21036 AU220101 Including = Not Available 1 Economy 240 V includes a built in reversing starter and wall mounted OPEN/STOP/CLOSE push button 2 Economy 415 V includes a wall reversing starter with OPEN/STOP/CLOSE push button Subject to measurement and design revisions. Page 2.3 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Chain Drive Operator Kits Operators for Balanced, Light Industrial, Roller Doors KE 5.24-WS (50 Nm) / 240 V / Pre-Wired / 0.5hp Equivalent 2 Door Size: 22 m - High Cycle Rated - SG50 Gearbox Part Number: Description Control AU21015 TKE 5.24 – WS T 801 Push Button Control AU21030 KE 5.24 -TS961 TS 961 Logic Control AU21031 KE 5.24 -TS961-PR TS 961 Logic Control with PE Beam and Remote Control Each kit includes: Operator with Ø25,4 / 31.75 mm Output Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 50 Nm Motor Power 0.37 kW Motor Duty Cycle HCR/40% Output Speed 24 RPM Supply Voltage 240 V Limit Switch Range / Qty 20 / 2 + 1 relay Hollow Shaft 25.4 mm Nominal current 3.5 A Limits mechanical Static Holding Torque 200 Nm Operator Protection IP 65* Weight 19 kg Mechanical Accessories Part Number: AU81010 Description Kit Operator Fixing SG50 - with Drive Chain 10B Including: Operator Fixing Plate, 5 feet of Chain, 1 x Sprocket 10B 14 Tooth AU81011 Kit Operator Fixing SG50 - with Drive Chain 12B Including: Operator Fixing Plate, 5 feet of Chain, 1 x Sprocket 12B 13 Tooth 30004555.00004 Emergency Hand Chain Extension 4m Extends the hauling chain by 2 m 30003965 Extension - Emergency Chain Activator, 4m extension 30004631 Chainlink T16/4 (10 pieces) Electrical Accessories Part Number: Description 40007038 Emergency Stop Button Wall Mounted, Plastic Housing, Water jet proof IP 65 Rated : 72 W x 72 H x 48 cm D 40015034 Push Button Open / Stop / Close Wall Mounted, Plastic Housing, Water jet proof IP 65 Rated: 72 W x 138 H x 48 cm D 40000308 Key Switch - UP/Down-Spring Return Wall Mounted, Metal Housing, Water Spray Proof IP54, 70 W x 90 H x 65 cm D 40000310 Key Switch - UP/Down-Spring Return with STOP Button Wall Mounted, Metal Housing, Water Spray Proof IP54, 70 W x 130 H x 65 cm D AU710008 Logic Upgrade Kit for TKE 5.24 and TKE 9.24 Operators 240 V Kit including: 1 x Controller ET 800 1 x Receiver 2 x Transmitter 1 x PE Beam reflective, 7.5m Range * Water Jet Proof when hard wired. Subject to measurement and design revisions. Page 2.4 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Chain Drive Operator Kits Operators for Balanced Roller Shutters – Economy KE 5.24-WS (50 Nm) / 240 V / Pre-Wired / 0.5hp Equivalent 2 Door Size: 22 m @ Ø168 drum - Maximum Door Height 4.5 m High Cycle Rated - SG50 Gearbox Part Number: Description Control AU21015 TKE 5.24 – WS T 801 Push Button Control Each kit includes: Operator with Ø25,4/31 mm Output Shaft, Hauling chain Mechanism, Controller, 5m Connection Cable, 5m lead with 3 pin plug. Technical Data: Output Torque 50 Nm Motor Power 0.37 kW Motor Duty Cycle HCR / 40% Output Speed 24 RPM Supply Voltage 240 V Limit Switch Range / Qty 20 / 2 + 1 relay Hollow Shaft 25.4 mm Nominal current 3.5 A Limits mechanical Static Holding Torque 200 Nm Operator Protection IP 65* Weight 19 kg KE 9.24-WS (90 Nm) / 240 V / Pre-Wired / 1.0hp Equivalent 2 Door Size: 40 m @ Ø168 drum - Maximum Door Height 4.5 m Standard Cycle Rated - SG50 Gearbox Part Number: Description Control AU21022 TKE 9.24 – WS T 801 Push Button Control Each kit includes: Operator with Ø25,4/31 mm Output Shaft, Hauling chain Mechanism, Controller, 5m Connection Cable, 5m lead with 3 pin plug. Technical Data: Output Torque 90 Nm Motor Power 0.45 kW Motor Duty Cycle SCR / 20% Output Speed 24 RPM Supply Voltage / Hz 240 V Limit Switch Range / Qty 20 / 2 + 1 relay Hollow Shaft 25.4 mm Nominal current 3.9 A Limits mechanical Static Holding Torque 450 Nm Operator Protection IP 65* Weight 19 kg KE 9.24 (90 Nm) / 415V / 1.0hp Equivalent 2 Door Size: 40 m @ Ø168 drum - High Cycle Rated - SG50 Gearbox Part Number: Description Control AU21003 KE 9.24 - TS 503 TS 503 Push Button Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Reversing Contactor, 5m Connection Cable Technical Data: Output Torque 90 Nm Motor Power 0.37 kW Motor Duty Cycle HCR / 60% Output Speed 24 RPM Supply Voltage / Hz 415 V Limit Switch Range / Qty 40 / 6 Hollow Shaft 25.4 mm Nominal current 1.2 A Limits mechanical Static Holding Torque 450 Nm Operator Protection IP 65* Weight 19 kg * Water Jet Proof when hard wired. Subject to measurement and design revisions. Page 2.5 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Chain Drive Operator Kits Operators for Balanced Roller Shutters – Economy KE 14.21 (140 Nm) / 415V / 1.5hp Equivalent 2 Door Size: 50 m @ Ø168 drum - High Cycle Rated - SG50 Gearbox Part Number: Description Control AU21025 KE 14.21 - T 503 T 503 Push Button Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Reversing Contactor, 5m Connection Cable Technical Data: Output Torque 140 Nm Motor Power 0.45 kW Motor Duty Cycle HCR / 60% Output Speed 21 RPM Supply Voltage / Hz 415 V Limit Switch Range / Qty 40 / 6 Hollow Shaft 25.4 mm Nominal current 2.5 A Limits mechanical Static Holding Torque 600 Nm Operator Protection IP 65* Weight 20 kg KE 17.24 (170 Nm) / 415V / 2.0hp Equivalent 2 Door Size: 60 m @ Ø168 drum - High Cycle Rated - SG63 Gearbox Part Number: Description Control AU21005 KE 17.24 - T 503 T 503 Push Button Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Reversing Contactor, 5m Connection Cable Technical Data: Output Torque 170 Nm Motor Power 0.4 kW Motor Duty Cycle HCR / 60% Output Speed 24 RPM Supply Voltage / Hz 415 V Limit Switch Range / Qty 40 / 6 Hollow Shaft 25.4 mm Nominal current 1.9 A Limits mechanical Static Holding Torque 510 Nm Operator Protection IP 65* Weight 20 kg Logic Upgrade for Economy Range Part Number: Description AU710008 Logic Upgrade Kit for TKE 5.24 and TKE 9.24 Operators 240 V Kit including: 1 x Controller ET 800 1 x Receiver 2 x Transmitter 1 x PE Beam reflective, 7.5m range AU710013 Logic Control Kit for mechanical Operators (other than TKE) Suitable for mechanical operators up to 3 kW, power supply 240 V / 415 V with neutral / 415 V without neutral Kit Including: 1 x TS 961 Logic Control 1 x 5m Connection Cable Controller to Operator 1 x Receiver 2 x Transmitter 1 x PE Beam reflective, 7.5m range * Water Jet Proof when hard wired. Subject to measurement and design revisions. Page 2.6 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Chain Drive Operator Kits Operators for Balanced Roller Shutters (single phase) KE 5.24-WS (50 Nm) / 240 V / Pre-Wired / 0.5hp Equivalent 2 Door Size: 22 m @ Ø168 drum - Maximum Door Height 4.5 m High Cycle Rated - SG50 Gearbox Part Number: Description Control AU21015 TKE 5.24 – WS T 801 Push Button Control AU21030 KE 5.24 - TS961 TS 961 Logic Control AU21031 KE 5.24 - TS961 - PR TS 961 Logic Control with PE Beam and Remote Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 50 Nm Motor Power 0.37 kW Motor Duty Cycle HCR/40% Output Speed 24 RPM Supply Voltage / Hz 240 V Limit Switch Range / Qty 20 / 2 + 1 relay Hollow Shaft 25.4 mm Nominal current 3.5 A Limits mechanical Static Holding Torque 200 Nm Operator Protection IP 65* Weight 19 kg KE 9.24-WS (90 Nm) / 240 V / Pre-Wired / 1.0hp Equivalent 2 Door Size: 40 m @ Ø168 drum - Standard Cycle Rated - SG50 Gearbox Part Number: Description KE 9.24 – TS 956 Control AU21008 AU21006 KE 9.24 – TS 961 TS 961 Logic Control AU21033 KE 9.24 – TS 961 - PR TS 961 Logic Control with PE beam and Remote Control TS 956 Push Button Control Each kit includes: Operator with Ø25.4/31.75 mm Output Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 90 Nm Motor Power 0.45 kW Motor Duty Cycle SCR/20% Output Speed 24 RPM Supply Voltage / Hz 240 V Limit Switch Range / Qty 40/6 Hollow Shaft 25.4 mm Nominal current 3.9 A Limits mechanical Static Holding Torque 450 Nm Operator Protection IP 65* Weight 20 kg KE 14.80-FI (140 Nm) / 240 V / 1.5hp Equivalent 2 Door Size: 50 m @ Ø168 drum – High Cycle Rated - SG50 Gearbox Part Number: AU21034 Description KE 14.80 FI – TS970 Control TS 970 Variable Speed Drive Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Logic Control, 5m Connection Cable Technical Data: Output Torque 140 Nm Motor Power 0.85 kW Motor Duty Cycle HCR 60% Output Speed 10-80 RPM Supply Voltage / Hz 240 V Limit Switch Range 30 Hollow Shaft 25.4 mm Nominal current 6.6 A Limits digital Static Holding Torque 600 Nm Operator Protection IP 65* Weight 25 * Water Jet Proof when hard wired. Subject to measurement and design revisions. Page 2.7 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd ELEKTROMATEN® Chain Drive Operator Kits Operators for Balanced Roller Shutters (3 phase) KE 9.24 (90 Nm) / 415 V / 1.0hp Equivalent 2 Door Size: 40 m @ Ø168 drum - High Cycle Rated - SG50 Gearbox Part Number: Description Control AU21020 KE 9.24 TS 956 TS 956 Push Button Control AU21000 KE 9.24 TS 961 TS 961 Logic Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 90 Nm Motor Power 0.37 kW Motor Duty Cycle HCR/60% Output Speed 24 RPM Supply Voltage / Hz 415 V Limit Switch Range / Qty 40 / 6 Hollow Shaft 25.4 mm Nominal current 1.2 A Limits mechanical Static Holding Torque 450 Nm Operator Protection IP 65* Weight 19 kg KE 14.21 (140 Nm) / 415V / 1.5hp Equivalent 2 Door Size: 50 m @ Ø168 drum - High Cycle Rated - SG50 Gearbox Part Number: Description Control AU21026 KE 14.21 TS 956 TS 956 Push Button Control AU21027 KE 14.21 TS 961 TS 961 Logic Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 140 Nm Motor Power 0.45 kW Motor Duty Cycle HCR/60% Output Speed 21 RPM Supply Voltage / Hz 415 V Limit Switch Range / Qty 40 / 6 Hollow Shaft 25.4 mm Nominal current 2.5 A Limits mechanical Static Holding Torque 600 Nm Operator Protection IP 65* Weight 20 kg KE 17.24 (170 Nm) / 415V / 2.0hp Equivalent 2 Door Size: 60 m @ Ø168 drum - High Cycle Rated - SG63 Gearbox Part Number: Description Control AU21021 KE 17.24 TS 956 TS 956 Push Button Control AU21007 KE 17.24 TS 961 TS 961 Logic Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Reversing Contactor, 5m Connection Cable Technical Data: Output Torque 170 Nm Motor Power 0.4 kW Motor Duty Cycle HCR / 60% Output Speed 24 RPM Supply Voltage / Hz 415 V Limit Switch Range / Qty 40 / 6 Hollow Shaft 25.4 mm Nominal current 1.9 A Limits mechanical Static Holding Torque 510 Nm Operator Protection IP 65* Weight 20 kg * Water Jet Proof when hard wired. Subject to measurement and design revisions. Page 2.8 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits For Balanced Sectional Doors Subject to measurement and design revisions. Page 3.1 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Introduction GFA – SE ELEKTROMATEN® Features: High Quality Products Made in Germany Australian Sales and Support Office Compact, Efficient, Robust Operators All Operators are suitable for Left or Right Hand – simplifies installation All 3-phase Operators are high cycle rated “Horizontal” or “Vertical” installation is possible – provides additional flexibility Integrated Overload and Safety Circuit - protects users and doors Standard Operators are Water Jet Proof (IP 65) when Hard Wired – eliminates the need for special operators Pre-Wired Solutions Available – for easy installation All 3 Phase Operators can be wired with or without Neutral Supply Accessories are available Subject to measurement and design revisions. Page 3.2 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Quick Reference Guide for Balanced Sectional Doors Single Phase - Operator Kits for Balanced Sectional Doors (Torsion Drive) Power Supply Total Panel Weight (Balanced) 1 x 240V <= 200 kg <= 400 kg <= 600 kg Economy Push Button Control Logic Control Description TSE 5.24-WS T801 SE 5.24-WS TS961 Part Number AU31008 AU31007 Pre-Wired Pre-Wired Description TSE 9.24-WS T801 SE 9.24-WS TS958 SE 9.24-WS TS970 Part Number AU31010 AU31009 AU31001 Pre-Wired Pre-Wired Pre-Wired Logic Control with Variable Speed Drive Description SE 14.80-FI TS970 Part Number AU31020 Three Phase - Operator Kits for Balanced Sectional Doors (Torsion Drive) Power Supply Total Panel Weight (Balanced) 3 x 415V <= 300 kg Economy <= 600 kg Logic Control Logic Control with Variable Speed Drive Description SE 6.65-DU TS970 Part Number AU31005 Description <= 400 kg Push Button Control Part Number SE 9.24 – WS900 SE 9.24 - TS958 SE 9.24 - TS970 AU31004 AU31003 AU31011 Description SE 14.80-FI TS970 Part Number AU31022 = Not Available Subject to measurement and design revisions. Page 3.3 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Operators for Balanced Sectional Doors – Economy TSE 5.24-WS (50 Nm) / 240V / Pre-Wired Max. Panel Weight: 200 kg -; Standard Cycle Rated - SG50 Gearbox Part Number: Description Control AU31008 TSE 5.24 – WS T 801 Push Button Control Each kit includes: Operator with Ø25,4 Hollow Shaft, Torque Mount Bracket, Hauling Chain Mechanism, Controller, 5 m lead with 3 pin plug Technical Data: Output Torque 50 Nm Motor Power 0.37 kW Motor Duty Cycle SCR / 40% Output Speed 24 RPM Supply Voltage 240 V Limit Switch Range / Qty 20 / 2 + 1 relay Hollow Shaft 25.4 mm Nominal current 3.5 A Limits mechanical Static Holding Torque 200 Nm Operator Protection IP 65* Weight 19 kg TSE 9.24-WS (90 Nm) / 240 V / Pre-Wired Max. Panel Weight: 400 kg - Standard Cycle Rated - SG50 Gearbox Part Number: Description Control AU31010 TSE 9.24 – WS T 801 Push Button Control Each kit includes: Operator with Ø25,4 Hollow Shaft, Torque Mount Bracket, Hauling Chain Mechanism, Controller, 5 m lead with 3 pin plug Technical Data: Output Torque 90 Nm Motor Power 0.45 kW Motor Duty Cycle SCR / 20% Output Speed 24 RPM Supply Voltage / Hz 240 V Limit Switch Range / Qty 20 / 2 + 1 relay Hollow Shaft 25.4 mm Nominal current 3.9 A Limits mechanical Static Holding Torque 450 Nm Operator Protection IP 65* Weight 19 kg SE 9.24 (90 Nm) / 415V Max. Panel Weight: 400 kg - High Cycle Rated - SG50 Gearbox Part Number: Description Control AU31011 SE 9.24 – WS900 WS900 Push Button Control Each kit includes: Operator with Ø25,4 Hollow Shaft, Torque Mount Bracket, Hauling Chain Mechanism, Controller, 5 m lead with 3 pin plug Technical Data: Output Torque 90 Nm Motor Power 0.37 kW Motor Duty Cycle HCR / 60% Output Speed 24 RPM Supply Voltage / Hz 415 V Limit Switch Range / Qty 20 / 6 Hollow Shaft 25.4 mm Nominal current 1.2 A Limits mechanical Static Holding Torque 450 Nm Operator Protection IP 65* Weight 19 kg * Water Jet Proof when hard wired. Subject to measurement and design revisions. Page 3.4 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Operators for Balanced Sectional Doors – Economy Logic Upgrade for Economy Range Part Number: AU710008 Description Logic Upgrade Kit for TKE 5.24 and TKE 9.24 Operators 240 V Kit including: 1 x Controller ET 800 1 x Receiver 2 x Transmitter 1 x PE Beam reflective, 7.5m range AU710013 Logic Control Kit for mechanical Operators (other than TKE) Suitable for mechanical operators up to 3 kW, power supply 240 V / 415 V with neutral / 415 V without neutral Kit Including: 1 x TS 961 Logic Control 1 x 5m Connection Cable Controller to Operator 1 x Receiver 2 x Transmitter 1 x PE Beam reflective, 7.5m range Subject to measurement and design revisions. Page 3.5 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Operators for Balanced Sectional Doors (single phase) SE 5.24-WS (50 Nm) 240 V- Pre-Wired Max. Panel Weight: 200 kg - Standard Cycle Rated - SG50 Gearbox Part Number: Description Control AU31007 SE 5.24 -TS961 TS 961 Logic Control Each kit includes: Operator with Ø25,4 mm Hollow Shaft, Torque Mount Bracket, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 50 Nm Motor Power 0.37 kW Motor Duty Cycle SCR/40% Output Speed 24 RPM Supply Voltage / Hz 240 V Limit Switch Range / Qty 20 / 2 + 1 relay Hollow Shaft 25.4 mm Nominal current 3.5 A Limits mechanical Static Holding Torque 200 Nm Operator Protection IP 65* Weight 19 kg SE 9.24-WS (90 Nm) 240 V - Pre-Wired Max. Panel Weight: 400 kg; Standard Cycle Rated – SG 50 Gearbox Part Number: Description SE 9.24 – TS 958 Control AU31009 AU31001 SE 9.24 –TS 970 TS 970 Logic Control TS 958 Push Button Control Each kit includes: Operator with Ø25,4 mm Hollow Shaft, Torque Mount Bracket, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 90 Nm Motor Power 0.45 kW Motor Duty Cycle SCR/20% Output Speed 24 RPM Supply Voltage / Hz 240 V Limit Switch Range / Qty 20 Hollow Shaft 25.4 mm Nominal current 3.9 A Limits digital Static Holding Torque 450 Nm Operator Protection IP 65* Weight 19 kg SE 14.80-FI (140 Nm) 240 V Max. Panel Weight: 600 kg - High Cycle Rated - SG50 Gearbox Part Number: Control AU31020 Description SE 14.80 – TS970 AU31020-PR SE 14.80 – TS970-PR TS 970 - Variable Speed Drive with PE Beam and Remote Control TS 970 - Variable Speed Drive Each kit includes: Operator with Ø25,4 mm Hollow Shaft, Torque Mount Bracket, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 140 Nm Motor Power 0.85 kW Motor Duty Cycle HCR 60% Output Speed 10-80 RPM Supply Voltage / Hz 1 x 240V Limit Switch Range 30 Hollow Shaft 25.4 mm Nominal current 6.6 A Limits digital Static Holding Torque 600 Nm Operator Protection IP 65* Weight 25 kg * Water Jet Proof when hard wired. Subject to measurement and design revisions. Page 3.6 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Operators for Balanced Sectional Doors SE 6.65-DU (60 Nm) – 415 V – Variable Speed Max. Panel Weight: 300 kg - High Cycle Rated - SG50 Gearbox Part Number: Description Control AU31005 SE 6.65 - TS 970 TS 970 - Variable Speed Drive AU31005-PR SE 6.65 - TS 970-PR TS 970 - Variable Speed Drive with PE beam and Remote Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 60 Nm Motor Power 0.45 kW Motor Duty Cycle HCR/60% Output Speed 20-65RPM Supply Voltage / Hz 415 V Limit Switch Range 20 Hollow Shaft 25.4 mm Nominal current 0.9 A Limits digital Static Holding Torque 450 Nm Operator Protection IP 65* Weight 19 kg SE 9.24 (90 Nm) – 415 V Max. Panel Weight: 400 kg - High Cycle Rated - SG50 Gearbox Part Number: Description Control AU31004 SE 9.24 TS 958 TS 958 Push Button Control AU31003 SE 9.24 TS 970 TS 970 Logic Control AU31003-PR SE 9.24 TS 970 - PR TS 970 Logic Control with PE beam and Remote Control Each kit includes: Operator with Ø25,4/31.75 mm Output Shaft, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 90 Nm Motor Power 0.37 kW Motor Duty Cycle HCR/60% Output Speed 24 RPM Supply Voltage / Hz 415 V Limit Switch Range 20 Hollow Shaft 25.4 mm Nominal current 1.2 A Limits digital Static Holding Torque 450 Nm Operator Protection IP 65* Weight 19 kg SE 14.80-FI (140 Nm) 415 V - 1.5hp Equivalent Max. Panel Weight: 600 kg - High Cycle Rated - SG50 Gearbox Part Number: Control AU31022 Description SE 14.80 – TS970 AU31022-PR SE 14.80 – TS970-PR TS 970 - Variable Speed Drive with PE Beam and Remote Control TS 970 - Variable Speed Drive Each kit includes: Operator with Ø25,4 mm Hollow Shaft, Torque Mount Bracket, Hauling Chain Mechanism, Controller, 5m Connection Cable Technical Data: Output Torque 140 Nm Motor Power 0.85 kW Motor Duty Cycle HCR 60% Output Speed 10-80 RPM Supply Voltage / Hz 415 V Limit Switch Range 30 Hollow Shaft 25.4 mm Nominal current TBA Limits digital Static Holding Torque 600 Nm Operator Protection IP 65* Weight 25 kg * Water Jet Proof when hard wired. Subject to measurement and design revisions. Page 3.7 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Operators for Balanced Sectional Doors Mechanical Accessories for Sectional Door Operators:: Part Number: 30004555.00004 Description Emergency Hand Chain Extension 4 m with Chainlink. Extends the hauling chain by 2 m 30004555.00006 40014220 Emergency Hand Chain Extension 6 m with Chainlink. Extends the hauling chain by 3 m Handchain Type T16/4, 50 m 50 m calibrated chain 30004631 Chainlink T16/4 (10 pieces) 30003965 Extension - Emergency Chain Activator, 4 m extension. 30002636 Torque mount Contact GfA Spring Bumper Spring Bumpers are used to push the panes back when the door is fully open and in horizontal position. This helps to avoid slack cable situation when torsion shaft drives are used. 30000972 Slack-rope switch Left-hand short pulley 88mm long 30000973 Slack-rope switch Right-hand short pulley 88mm long 30004914.00001 Chain wheel set 1/2“x5/16“ 19 teeth d=25,40 Maximum operator torque 115 Nm. Contact GfA SG 50 Gear Box with de-clutching ER for balanced doors De-clutching is available for the following Operators: SE 5.24-WS, SE 9.24-WS, SE 9.24, SE 14.80-FI Subject to measurement and design revisions. Page 3.8 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Operators for Balanced Sectional Doors Electrical Accessories for Sectional Door Operators: Part Number: 40007038 Description Emergency Stop Button Wall Mounted, Plastic Housing, Waterproof IP 65 Rated W x H x D: 72 x 72 x 48 40015034 Push Button Open / Stop / Close Wall Mounted, Plastic Housing, Waterproof IP 65 Rated W x H x D: 72 x 138 x 48 40000308 Key Switch - UP/Down-Spring Return Wall Mounted, IP54 70 x 90 x 65 40014429 Polarised Reflex Photo-Beam (Kit) Range 7.5 m, reflector, mounting bracket, Protection class IP65, Voltage 24V-240V UC. AU40014432 Polarised Thru-Photo-Beam Range 60 m, reflector, mounting bracket, Protection class IP65, Voltage 24V-240V UC. 30004694 Loop detector kit for control panels TS 961 and TS 970. • Wire Loop to be supplied by others 40014953 Receiver (GfA) 1 channel, EKX1M, 434 MHz dip-switch coding, with UBS plug-in connection 40012142 Transmitter - 1 channel, SKX1LC, 434 MHz Dip-switch coding 40012143 Transmitter - 2 channel SKX2LC, 434 MHz Dip-switch coding Subject to measurement and design revisions. Page 3.9 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd SE - ELEKTROMATEN® Operator Kits Operators for Balanced Sectional Doors Electrical Accessories for Sectional Door Operators: Part Number: 20003217 Description Flash - Light Set for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt 30004161 Yellow light indicator d=130mm for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt, 40 Watt 30004161-LED Yellow light indicator d=130mm, with LED globe for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt, 3.6 Watt 30001955 Red-Green Light Indicator for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt, 40 Watt 30001955-LED Red-Green Light Indicator, with LED globe for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt, 2 x 3.6 Watt Safety Edges: Part Number: Description AU81004.0004 Safety Edge Kit - Pneumatic 4 m - to suit TS 961 / TS970 / TS 981 Controller AU81004.0006 Safety Edge Kit - Pneumatic 6 m - to suit TS 961 / TS970 / TS 981 Controller AU81005.0004 Safety Edge Kit - Optical 4m - to suit TS 961 / TS970 / TS 981 Controller AU81005.0006 Safety Edge Kit - Optical 6m - to suit TS 961 / TS970 / TS 981 Controller Battery Back-Up - 240 Volt Part Number: AU80011 Description UPS 2000 VA 240 V • maximum output load 1200 W, • output voltage 230 Vac +/- 2 %, 50 Hz • ambient temperature 0 ~ 40 degree C • dimensions: 487 x 200 x 340 high, 32 kg • 1 Year Warranty from date of purchase • Fixing Material not included. • Suitable for single operation of an operator AU80034 UPS 3000 VA 240V suitable for KE 9.24-WS • maximum output load 2100 W, • output voltage 230 Vac +/- 2 %, 50 Hz • ambient temperature 0 ~ 40 degree C • dimensions: 487 x 200 x 340 high, 42 kg • 1 Year Warranty from date of purchase • Fixing Material not included. • Suitable for single operation of an operator Subject to measurement and design revisions. Page 3.10 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Control Panels for ELEKTROMATEN® Or Third Party Operators Suits All Operators with Mechanical Limit Switches Up to 3 kW Features Common to Control Panels TS 956 and, TS 961 • Supply voltage: 1 x 240 V/N/PE, 3 x 240 V/PE, 3 x 415 V/N/PE, 3 x 415 V/PE. • 190 x 300 x 115 mm high. • Protection Class IP65 when hard wired. • Integrated OPEN-STOP-CLOSE push-button. • Adjustment settings via selector switch with 7-segment display. • Plug in connections for ELEKTOMATEN operators. • Plug-in connection for slack rope or pass door switch spiral cable. • Selectable operating modes. • Slack cable / pass-door switch contact is available. • Status and information display. • Maintenance indicator, Adjustment range: 1,000 to 99,000 cycles. Part Number: 20095600.00001 Description Push Button Control Panel TS 956 240 V / 1 A Relay Contact External 20096100.00001 Logic Control Panel TS 961 Suitable for Car Park Applications • All the features of the Control Panel TS 956 plus the following: • Terminals for one pull-switch or radio control. • Intermediate stop position may be selected • Plug-in connection for receiver. 240 V / 1 A 24 V 150 mA External External Cables with plugs for GfA Operators with Mechanical Limit Switches (NES) and TS 956 / TS 961 Control Panels : Part Number: Description 20002320.005 Connecting Cable Controller to Motor - 5.0 m long Plugs fitted on each end of cable 20002320.007 Connecting Cable Controller to Motor - 7.0 m long Plugs fitted on each end of cable 20002320.015 Connecting Cable Controller to Motor - 15.0 m long Plugs fitted on each end of cable Subject to measurement and design revisions. Page 7.1 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Control Panels for ELEKTROMATEN® Control Panels for Operators with Digital Limit Switches (DES) Up to 3 kW Features Common to Control Panels TS 958 TS 970 and, TS 981 • Supply voltage: 1 x 240 V/N/PE, 3 x 240 V/PE, 3 x 415 V/N/PE, 3 x 415 V/PE. • 190 x 300 x 115 mm high. • Protection Class IP65 when hard wired. • Integrated OPEN-STOP-CLOSE push-button. • Adjustment settings via selector switch with 7-segment display. • Plug in connections for ELEKTOMATEN operators. • Plug-in connection for pneumatic and optical safety edge (bumper strip) and slack cable switch. • Selectable operating modes. • Slack cable / pass-door switch contact is available. • Status and information display. • Maintenance indicator, Adjustment range: 1,000 to 99,000 cycles. • Cycle counter. Part Number: 20095800.00001 Description Push Button Control Panel TS 958 • Comfortable limit adjustment and programming of all functions from ground level. • Initial rapid limit adjustment in 4 steps. • Monitoring of the door operation recognises any sudden change in door operation. 240 V / 1 A External 20097003.01001 Relay Contact Logic Control Panel TS 970 Suitable for Car Park Applications • All the features of the Control Panel TS 958 plus the following: • Terminals for one radio receiver or pull-switch. • Intermediate stop position. • Plug-in connection for Radio control. • Terminal for PE beams. • Terminal to interface with security system or card reader • Automatic recognition of of GfA safety edge. 20098100.00002 240 V / 1 A 24 V / 150 A External External Control Panel TS 981 With Traffic Management • All the features of the Control Panel TS 970 plus the following: • Terminals for two pull-switches or radio control, 2 channels available. • Two programmable relay contacts. • Adjustable one and two way traffic light control. • Monitoring of the door operation recognizes any sudden change in door operation. • Selectable entrapment evaluation for Optical systems and safety photo-beams. • Status-monitoring module with 5 voltage free changeover contacts. Optional Air-lock Module Subject to measurement and design revisions. Page 7.2 12/2011 Optional Status Monitoring Module Smoke Draining Function (RWA) GFA-ELEKTROMATEN Australia Pty Ltd Control Panels for ELEKTROMATEN® Cables with plugs for GfA Operators with Digital Limit Switches (DES) and TS 958 / TS 970 / TS 981 Operators : Part Number: Description 20002420.005 Connecting Cable Controller to Motor - 5.0 m long Plugs fitted on each end of cable 20002420.007 Connecting Cable Controller to Motor - 7.0 m long Plugs fitted on each end of cable 20002420.009 Connecting Cable Controller to Motor - 9.0 m long Plugs fitted on each end of cable 20002420.015 Connecting Cable Controller to Motor - 15.0 m long Plugs fitted on each end of cable Accessories for control panels TS 956 / TS 958 / TS 961 / TS 970 / TS 981: Part Number: Description 30004616 Key Switch assembly kit for fitting to controller lid 30004615 Emergency stop assembly kit for fitting to controller lid 30004679 Intermediate stop toggle switch assembly kit fitting to controller lid Remote controls for control panels TS 961 / TS 970 TS / 981: Part Number: 40014953 Description Receiver to suit GfA, 1 channel, EKX1M, 434 MHz dip-switch coding, with UBS plug-in connection 40012778 Receiver to suit 3rd party controls, 24 V DC, 1 channel, EKX1MG, 434 MHz Dip-switch coding 40012142 Transmitter - 1 channel, SKX1LC, 434 MHz Dip-switch coding 40012143 Transmitter - 2 channel SKX2LC, 434 MHz Dip-switch coding 40012145 Transmitter - 4 channel SKX4LC, 434 MHz Dip-switch coding 40010623 Heavy Duty Transmitter - 1 Channel SKX1 434 MHz Dip-switch coding 40010626 Heavy Duty Transmitter - 4 Channel SKX1 434 MHz Dip-switch coding Subject to measurement and design revisions. Page 7.3 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Control Panels for ELEKTROMATEN® Safety Accessories: Part Number: 40014429 Description Polarised Reflex Photo-Beam (Kit) Range 7.5 m, reflector, mounting bracket, Protection class IP65, Voltage 24V-240V UC. AU40014432 Polarised Thru-Photo-Beam Range 60 m, reflector, mounting bracket, Protection class IP65, Voltage 24V-240V UC. AU81004.0004 Safety Edge Kit - Pneumatic 4 m - to suit TS 961 / TS970 / TS 981 Controller AU81004.0006 Safety Edge Kit - Pneumatic 6 m - to suit TS 961 / TS970 / TS 981 Controller AU81005.0004 Safety Edge Kit - Optical 4 m - to suit TS 961 / TS970 / TS 981 Controller AU81005.0006 Safety Edge Kit - Optical 6 m - to suit TS 961 / TS970 / TS 981 Controller Part Number: Description Loop detector: 30004694 Loop detector kit for control panels TS 961 and TS 970. • Wire Loop to be supplied by others Logic Upgrades Part Number: AU710008 Description Logic Upgrade Kit for TKE 5.24 and TKE 9.24 Operators 240 V Kit including: 1 x Controller ET 800 1 x Receiver 2 x Transmitter 1 x PE Beam reflective, 7.5m range AU710013 Logic Control Kit for mechanical Operators (other than TKE) Suitable for mechanical operators up to 3 kW, power supply 240 V / 415 V with neutral / 415 V without neutral Kit Including: 1 x TS 961 Logic Control 1 x 5m Connection Cable Controller to Operator 1 x Receiver 2 x Transmitter 1 x PE Beam reflective, 7.5m range Subject to measurement and design revisions. Page 7.4 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Accessories for ELEKTROMATEN® Emergency Chain Extensions & Activators for Chain and Direct drive Operators: Part Number: 30004555.00004 Description Emergency Hand Chain Extension 4 m with Chainlink. Extends the hauling chain by 2 m 30004555.00006 40014220 Emergency Hand Chain Extension 6 m with Chainlink. Extends the hauling chain by 3m Handchain Type T16/4, 50 m 50 m calibrated chain 30004631 Chainlink T16/4 (10 pieces) 30003965 Extension - Emergency Chain Activator, 4 m extension. Mounting Brackets for Chain Drive Operators: Part Number: No Image Description AU80004 Motor Fastening Kit SG 50 (4 x M8 x 25, grade 8.8, 4 Washer M8) AU80002 Mounting Plate KE SG50 - 8.0 mm AU80043 Mounting Plate KE SG63 No Image AU80005 Inboard Mounting Plate KE SG50 No Image AU80032 Adaptor Bracket for KE 9.24 / KE 17.24 to suit old operator standard Chains & Sprockets for Chain Drive Operators: Part Number: Description AU80001-S1013 Sprocket 10B 13 tooth, Ø31.75 mm AU80001-S1014 Sprocket 10B 14 tooth, Ø31.75 mm AU80001-S1019 Sprocket 10B 19 tooth, Ø31.75 mm AU80001-S1213 Sprocket 12B 13 tooth, Ø31.75 mm AU80003-DC10B-5F Chain 10 B - 5 foot long with Link AU80003-DC12B-5F Chain 12 B - 5 foot long with Link Subject to measurement and design revisions. Page 8.1 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Accessories for ELEKTROMATEN® Chain Drive Operators for Balanced Doors Part Number: 10003690.00001 Description ELEKTROMAT Chain Drive KE 9.24-25.40/31.75 –WS Single Phase • Door Size: 40 square metres • Output Torque 90 Nm at 24 RPM • Shaft Diameter 25.4 mm / 31.75 mm • Protection Class IP65 • Supply Voltage/ Frequency 1 X 240 V / 50 Hz • 6 mechanical limit switches with a range of 40 revolutions 10003689.00001 ELEKTROMAT Chain Drive KE 9.24-25.40/31.75 • Door Size: 40 m2 square metres • Output Torque 90 Nm at 24 RPM • Shaft Diameter 25.4mm / 31.75 mm • Protection Class IP65 • Supply Voltage/ Frequency 3 X 415 V / 50 Hz • 6 mechanical limit switches with a range of 40 revolutions 10004114.00001 ELEKTROMAT SP-KE 14.21-25,40/31,75 • Door Size: 50 square metres • Output Torque 140 Nm at 21 RPM • Shaft diameter 25.4mm / 31.75 mm • Protection Class IP65 • Supply Voltage/ Frequency 3 X 415 V / 50 Hz • 6 mechanical limit switches with a range of 40 revolutions 10003692.00013 ELEKTROMAT Chain Drive KE 17.24-25.40/31.75 • Door Size: 60 square metres • Output Torque 170 Nm at 24 RPM • Shaft Diameter 25.4mm / 31.75 mm • Protection Class IP65 • Supply Voltage/ Frequency 3 X 415 V / 50 Hz • 6 mechanical limit switches with a range of 40 revolutions 30003380 Motor Connector - Plug 14/5-terminals (NES) • Suitable for all ELEKTROMATEN with mechanical Limit Switches (NES) (Required if connection cable is not supplied) Control Panels and Cables for Above Chain Drive Operators with Mechanical Limits: Part Number: Description 20095600.00001 Push Button Control Panel TS 956 20096100.00001 Logic Control Panel TS 961 Suitable for Car Park Applications 20002320.005 Connecting Cable Controller to Motor - 5.0 m long Plugs fitted on each end of cable 20002320.007 Connecting Cable Controller to Motor - 7.0 m long Plugs fitted on each end of cable 20002320.015 Connecting Cable Controller to Motor - 15.0 m long Plugs fitted on each end of cable Subject to measurement and design revisions. Page 8.2 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Accessories for ELEKTROMATEN® ® Mounting Brackets for Safedrive Operators: Part Number: Description AU40006488 Motor Bracket Safedrive SIK 15.12- SI55.15 (SG63F/SG85, max 5kN) AU40012396 Motor Bracket Safedrive SI75.15 - SI140.7 ( SG 115, max 12kN) AU30002930 Torque Mount SG85 AU30003162 Torque Mount SG115 ® Shafts and Discs to Suit Safedrive Drums: Part Number: Description AU80033 KIT Shafts Ø25.00 mm x 600 mm • 1 x Shaft 25.00 mm x 600 mm, plain (CS1020) • 1 x Shaft 25.00 mm x 600 mm, with key way (CS1020) • 1 x Key Steel, 8x7x120 AU80012 KIT Shafts Ø25.4 mm x 600 mm • 1 x Shaft 25.4 mm x 600 mm, plain (CS1020) • 1 x Shaft 25.4 mm x 600 mm, with key way (CS1020) • 1 x Key Steel, 8x7x120 AU80006 KIT Shafts Ø30 mm x 600 mm • 1 x Shaft 30 mm x 600 mm, plain (CS1020) • 1 x Shaft 30 mm x 600 mm, with key way (CS1020) • 1 x Key Steel, 8x7x120 AU80007 KIT Shafts Ø40 mm x 600 mm • 1 x Shaft 40 mm x 600 mm, plain (CS1020) • 1 x Shaft 40 mm x 600 mm, with key way (CS1020) • 1 x Key Steel, 12x8x120 AU80008 KIT Shafts Ø55 mm x 600 mm • 1 x Shaft 55 mm x 600 mm, plain (CS1020) • 1 x Shaft 55 mm x 600 mm, with key way (CS1020) • 1 x Key Steel, 16x10x140 AU80009 KIT Shafts Ø60 mm x 600 mm • 1 x Shaft 60 mm x 600 mm, plain (CS1020) • 1 x Shaft 60 mm x 600 mm, with key way (CS1020) • 1 x Key Steel, 16x10x140 AU80037 Disc for Drum, 25 mm shaft OD = 156.5 mm, ID = 25 mm, S= 8 AU80036 Disc for Drum, 30 mm shaft OD = 156.5 mm, ID = 30 mm, S = 8 AU80010 Disc for Drum, 40 mm shaft OD = 156.5 mm, ID = 40 mm, S = 8 AU80038 Disc for Drum, 40 mm shaft OD = 157.7 mm, ID = 40 mm, S = 8 AU80029 Disc for Drum, 40 mm shaft OD = 160,0 mm, ID = 40 mm, S = 8 AU80030 Disc for Drum, 55 mm shaft OD = 156.5 mm, ID = 55 mm, S = 8 mm AU80031 Disc For Drum, 55 mm shaft OD =204 mm, ID = 55 mm, S = 8 mm Subject to measurement and design revisions. Page 8.3 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Accessories for ELEKTROMATEN® Bearings: Part Number: Description AU80022 Pillow Bearing 25.00 mm AU80023 Pillow Bearing 25.4 mm (1") AU80017 Pillow Bearing 30 mm AU80018 Pillow Bearing 40 mm AU80019 Pillow Bearing 55 mm AU80015 Flange Bearing 40 mm AU80016 Flange Bearing 55 mm Control Panels and Cables for Operators with Digital Limits: Part Number: Description 20095800.00001 Push Button Control Panel TS 958 20097000.00001 Logic Control Panel TS 970 20098100.00002 Control Panel TS 981 With Traffic Management 20002420.005 Connecting Cable Controller to Motor - 5.0 m long Plugs fitted on each end of cable 20002420.007 Connecting Cable Controller to Motor - 7.0 m long Plugs fitted on each end of cable 20002420.009 Connecting Cable Controller to Motor - 9.0 m long Plugs fitted on each end of cable 20002420.015 Connecting Cable Controller to Motor - 15.0 m long Plugs fitted on each end of cable Subject to measurement and design revisions. Page 8.4 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Accessories for ELEKTROMATEN® Push Buttons and Key Switches for All Operators: Part Number: Description 40007038 Emergency Stop Button Wall Mounted, Plastic Housing, Waterproof IP 65 Rated W x H x D: 72 x 72 x 48 40015034 Push Button Open / Stop / Close Wall Mounted, Plastic Housing, Waterproof IP 65 Rated W x H x D: 72 x 138 x 48 40000308 Key Switch - UP/Down-Spring Return Wall Mounted, IP54 70 x 90 x 65 40000309 Key Switch - UP/Down-Spring Return Flush Mounted, IP54 Housing dimensions 70 x 90 x 65 Plate dimensions 100 x 125 40000310 Key Switch - UP/Down-Spring Return with STOP Button Wall Mounted, IP54 70 x 130 x 65 40000311 Key Switch - UP/Down-Spring Return with STOP Button Flush Mounted, IP54 Housing dimensions 70 x 130 x 65 Plate dimensions 100 x 170 40000306 Push Button - Open / Stop / Close with Key Switch Wall Mounted, Metal Housing, IP54 Rated 70 x 192 x 65 30004616 Key Switch assembly kit for fitting to controller lid 30004615 Emergency stop assembly kit for fitting to controller lid 30004679 Intermediate stop toggle switch assembly kit fitting to controller lid Subject to measurement and design revisions. Page 8.5 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Accessories for ELEKTROMATEN® PE Beams: Part Number: Description 40014429 Polarised Reflex Photo-Beam (Kit) Range 7.5 m, reflector, mounting bracket, Protection class IP65, Voltage 24V-240V UC. AU40014432 Polarised Thru-Photo-Beam Range 60 m, reflector, mounting bracket, Protection class IP65, Voltage 24V-240V UC. Remote Controls for TS 961 / TS 970 / TS 981 Control Panels: Part Number: Description 40014953 Receiver to suit TS 961 / TS 970 / TS 981 1 channel, EKX1M, 434 MHz dip-switch coding, with UBS plug-in connection 40012778 Receiver 12 to 24 V DC 1 channel, EKX1MG, 434 MHz Dip-switch coding 40012142 Transmitter - 1 channel, SKX1LC, 434 MHz Dip-switch coding 40012143 Transmitter - 2 channel SKX2LC, 434 MHz Dip-switch coding 40012145 Transmitter - 4 channel SKX4LC, 434 MHz Dip-switch coding 40010623 Heavy Duty Transmitter - 1 Channel SKX1 434 MHz Dip-switch coding 40010626 Heavy Duty Transmitter - 4 Channel SKX1 434 MHz Dip-switch coding Subject to measurement and design revisions. Page 8.6 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Accessories for ELEKTROMATEN® Warning Lights & Traffic Lights: Part Number: Description 20003217 Flash - Light Set for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt – no external power supply required 30004161 Yellow light indicator d=130mm for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt, 40 Watt 30004161-LED Yellow light indicator d=130mm, with LED globe for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt, 3.6 Watt 30001955 Red-Green Light Indicator for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt, 40 Watt 30001955-LED Red-Green Light Indicator, with LED globe for TS961, 970 & 981 Logic Control Panel IP65, 240 Volt, 2 x 3.6 Watt Safety Edges and Safety Switches: Part Number: Description AU81004.0004 Safety Edge Kit - Pneumatic 4 m - to suit TS 961 / TS970 / TS 981 Controller AU81004.0006 Safety Edge Kit - Pneumatic 6 m - to suit TS 961 / TS970 / TS 981 Controller AU81005.0004 Safety Edge Kit - Optical 4m - to suit TS 961 / TS970 / TS 981 Controller AU81005.0006 Safety Edge Kit - Optical 6m - to suit TS 961 / TS970 / TS 981 Controller 30000972 Slack-rope switch Left-hand short pulley 88mm long 30000973 Slack-rope switch Right-hand short pulley 88mm long Subject to measurement and design revisions. Page 8.7 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd Accessories for ELEKTROMATEN® Battery Back-Up - 240 Volt Part Number: Description AU80011 UPS 2000 VA 240 V • maximum output load 1200 W • output voltage 230 Vac +/- 2 %, 50 Hz • ambient temperature 0 ~ 40 degree C • dimensions: 487 x 200 x 340 high, 32 kg • 1 Year Warranty from date of purchase • Fixing Material not included. • Suitable for single operation of an operator AU80034 UPS 3000 VA 240V suitable for KE 9.24-WS • maximum output load 2100 W • output voltage 230 Vac +/- 2 %, 50 Hz • ambient temperature 0 ~ 40 degree C • dimensions: 487 x 200 x 340 high, 42 kg • 1 Year Warranty from date of purchase • Fixing Material not included. • Suitable for single operation of an operator Battery Back-Up - 415 Volt Part Number: Description AU80040 UPS for 415 V Contact GFA for details Subject to measurement and design revisions. Page 8.8 12/2011 GFA-ELEKTROMATEN Australia Pty Ltd