ANNEX A: JFC STANDARD POWER PLUGS AND RECEPTACLES
The following are the JFC approved standard equipment power plugs are receptacle outlets.
Equipment manufacturers and suppliers are required to comply with these standards.
For any other plugs and receptacles not listed or for any proposed alternative, the manufacturers
and suppliers must seek the approval of JFC for compliance to JFC Restaurant Systems
requirements and safety standards.
IEC PLUG TYPE B
Rated Voltage: 250V, 1Ø, 60Hz
Rated Current: 15A
Blade Material: Brass or Nickel-coated
Brass
NEMA 6-20R and NEMA 6-20P
Rated Voltage: 250V, 1Ø, 60Hz
Rated Current: 20A
Blade Material: Brass or Nickel-coated
Brass
NEMA 6-30R and NEMA 6-30P
Rated Voltage: 250V, 1Ø, 60Hz
Rated Current: 30A
Blade Material: Brass or Nickel-coated
Brass
NEMA 6-50R and NEMA 6-50P
Rated Voltage: 250V, 1Ø, 60Hz
Rated Current: 50A
Blade Material: Brass or Nickel-coated
Brass
NEMA L6-20R and NEMA L6-20P
Twist-lock Receptacle
Rated Voltage: 250V, 1Ø, 60Hz
Rated Current: 20A
Blade Material: Brass or Nickel-coated
Brass
IEC 60309 / IEC 309
Rated Voltage: 240V, 3Ø, 60Hz
Rated Current: 20A/30A/60A/100A
Configuration: IEC 309-1
Blade / Pin Material: Brass
Ingress Protection: IP44
GROUND FAULT CIRCUIT
INTERRUPTER
(GFCI)
Rated Voltage: 250V, 60Hz
Rated Current: 20A
Leakage Current Level: 4mA – 5mA
Trip Time: ≤ 20msec
Wire Terminals: up to 5.5mm2