BRIEF DESCRIPTION & EASY STEPS TO SETUP IJ.START.CANON • Canon is one of the earliest and well-known businesses that produce digital appliances. In its initial years, the corporation becomes now not capable of manufacturing its personal devices. Here you will get complete information about ij.start.canon issue. Though Canon had suffering beyond nowadays’s date it is ruling the market. • Canon Printers are one of the fine printers in the industry. The exceedingly flexible all in one printer has capabilities that make them stand out amongst others. Cloud-prepared printers of Canon connect with cloud storage and print documents effectively. Connect with the whole lot viable like Bluetooth, USB, and cloud after getting finished with Canon ij Setup. Let’s Read Canon/Ij Setup weblog for a clean printer setup. • Despite notable high-quality, canon customers cope with some most important issues when they use canon printers. And it's miles herbal to panic when caught in the center of your task. No wonder in case you also face the same, as those devices run on technology. And technical matters provide no affirmation however first-rate after they run nicely. So don't worry much like the alternative troubles you can also restore this problem as well by means of following the under-cited factors. • You have two option for Canon Ij setup • 1-You can canon printer CD. • 2- You can install Canon.com/ijsetup • After that, you need to press Next on the screen. • Now, you will turn on your printer • Then, you need to select another setup • After that, you will choose your Wi-Fi network • Now check for the blue and green light of (Wi-Fi), on the printer • Press Next • Finish agree on the terms step WE HAVE NETWORK SETTING CONFIRMATION FOR CANON IJ SETUP: To make certain that the printer has successfully installed a connection on your wireless printer. Canon IJ Setup lists no of steps underneath to make sure the identical • Make positive to show on the printer. • Now load A4 sheet or letter-size undeniable paper. • After that press and keep the Resume/Cancel button till the alarm lamp flashes 15 instances. Release the button after it is performed flashing 15 instances. • Network information page will print. • Just check whether the “Connection” indicates “Active” and that the SSID – Service Set suggests the suitable name of your wi-fi community inside the printout. Thank You….