Philippine
Accreditation
Bureau
SCOPE OF ACCREDITATION
Appendix No. APCB-1015-001 (Table 8) Rev. 3.
SGS Gulf Limited – Regional Operating Headquarters (ROHQ)
20th Floor, Citibank Tower
8741 Paseo de Roxas
Makati City
has been accredited to PNS ISO/IEC 17065:2013 – Conformity assessment –
Requirements for bodies certifying products, processes and services to provide product
certification for the following scopes:
No.
Product Description
Test Standard Number and Description
Electrical Products
Conformity assessment of goods to be exported in to Algeria, Burundi, Cameroun, Egypt, Ethiopia,
Gabon, Kenya, Mongolia, Nigeria, Qatar, Tanzania, Uganda, Zanzibar
SGS Scheme Document Electrical Product Safety
(Batch Certification) – System Type 1a
SGS Scheme Document Electrical Product Safety
(Product Registration) – System Type 3
SGS Scheme Document Electrical Product Safety
(Product Licensing) – System Type 5
No.
1.
2.
Products
IT, Office and
Telecommunications
Equipment
Conduit systems for
cable management
Page 1 of 46
Test Standard Number and Description
IEC 60950-1:2013 - Information technology equipment - Safety - Part 1: General
requirements
IEC 62368-1:2018 - Audio/video, information and communication technology
equipment - Part 1: Safety requirements
US IEC 60950-1:2001 - Information technology equipment - Safety – Part 1: General
requirements
KS EAS 390:2005 – Information technology – Safety requirements
KS IEC 60950-1:2005 – Information technology equipment – Safety – General
requirements
KS IEC 60950-1:2005+AMD1:2009+AMD2:2013 (Adopted, 2017) - Information
technology equipment - Safety Part 1: General requirements, First Edition
KS IEC 60950-21:2002 (Adopted, 2017) - Information technology equipment - Safety
- Part 21: Remote power feeding
KS IEC 60950-22:2016 (Adopted, 2017) - Information technology equipment Safety - Part 22: Equipment to be installed outdoors
KS IEC 60950-23:2005 (Adopted, 2017) - Information technology equipment -Safety
- Part 23: Large data storage equipment
TZS 1953-1:2017 - Information technology equipment - Safety – Part 1: General
requirements (IEC 60950-1:2005)
US IEC 61386-1:1996 - Conduit systems for electrical installations – Part 1: General
requirements
US IEC 61386-21:2002 - Conduit systems for cable management – Part 21:
Particular requirements – Rigid conduit systems
US IEC 61386-22:2002 - Conduit systems for cable management – Part 22:
Particular requirements – Pliable conduit systems
Philippine
Accreditation
Bureau
US IEC 61386-23:2002 - Conduit systems for cable management – Part 23:
Particular requirements – Flexible conduit systems
US IEC 61386-24:2004 - Conduit systems for cable management – Part 24:
Particular requirements – Conduit systems buried underground
US IEC 61084-1:1991 - Cable trunking and ducting systems for electrical
installations – Part 1: General requirements
US IEC 61084-2-1:1996 - Cable trunking and ducting systems for electrical
installations – Part 2: Particular requirements – Section 1: Cable trunking and ducting
systems intended for mounting on walls or ceilings
US IEC 61084-2-2:2003 - Cable trunking and ducting systems for electrical
installations – Part 2-2: Particular requirements - Cable trunking systems and cable
ducting systems intended for underfloor and flushfloor installations
US IEC 61084-2-4:1996 - Cable trunking and ducting systems for electrical
installations – Part 2: Particular requirements – Section 4: Service poles
US IEC 61035-1:1990 - Specification for conduit fittings for electrical installations –
Part 1: General requirements
US IEC 61035-2-1:1993 - Specification for conduit fittings for electrical installations
– Part 2: Particular specifications – Section 1: Metal conduit fittings
US IEC 61035-2-2:1993 - Specification for conduit fittings for electrical installations
– Part 2: Particular specifications – Section 2: Conduit fittings of insulating material
US IEC 61035-2-3:1993 - Specification for conduit fittings for electrical installations
– Part 2: Particular specifications – Section 3: Fittings for flexible conduits of metal,
insulating or composite materials and for pliable conduits of metal or composite
materials
US IEC 61035-2-4:1995 - Specification for conduit fittings for electrical installations
– Part 2: Particular specifications – Section 4: Conduit fittings of aluminium alloy
US 261-1:2000/ EAS 178 - Specification for PVC conduits for electric wiring. Part 1:
Plain flexible
US 261-2:2000/EAS 179 - Specification for PVC conduits for electric wiring. Part 2:
Corrugated conduits
KS 468-1:1997 (Confirmed, 2018) - Specification for flexible PVC conduits for
electric wiring - Part 1: Plain conduits
KS 468-2:1990 (Confirmed, 2018) - Specification for flexible PVC conduits for
electric wiring - Part 2: Corrugated conduits
KS IEC 61386-1:2008 (Adopted, 2017) - Conduit systems for cable management Part 1: General requirements
KS IEC 61386-21:2002 (Adopted, 2017) - Conduit systems for cable management Part 21: Particular requirements – Rigid conduit systems
KS IEC 61386-22:2002 (Adopted, 2017) - Conduit systems for cable management Part 22: Particular requirements – Pliable conduit systems
KS IEC 61386-23:2002 (Adopted, 2017) - Conduit systems for cable management Part 23: Particular requirements – Flexible conduit systems
KS IEC 61386-24:2004 (Adopted, 2017) - Conduit systems for cable management Part 24: Particular requirements – Conduit systems buried underground
KS IEC 61386-25:2011 (Adopted, 2017) - Conduit systems for cable management Part 25: Particular requirements – Conduit fixing devices
KS 180-1:1981 (Confirmed, 2013) - Specification for metallic conduits used for
electrical installations - Part 1: Conduits
KS 180-2:1991 (Confirmed, 2013) - Specification for metallic conduits and fittings
for electrical installations - Part 2: Fittings
KS 889-1:1989 (Confirmed, 2013) - Specification for cable trunking - Part 1: Steel
surface trunking
KS 889-2:1989 (Confirmed, 2013) - Specification for cable trunking - Part 2: Steel
underfloor (duct) trunking
KS 889-3:1989 (Confirmed, 2013) - Specification for cable trunking - Part 3:
Specification for cable trunking made of insulating materials
KS EAS 168:2007 (Confirmed, 2017) - Junction boxes for use in electrical
installations - Specification
KS EAS 178-1:2007 - Flexible PVC conduits for electric wiring – Specification – Part
1: Plain conduits
Page 2 of 46
Philippine
Accreditation
Bureau
KS EAS 178-2:2007 - Flexible PVC conduits for electric wiring – Specification – Part
2: Corrugated conduits
TZS 233 -1: 1984 - Non- Metallic conduits for electrical installation - Specification Part 1: Rigid PVC conduits
TZS 233 -2: 1986 - Non- Metallic conduits for electrical installation - Specification Part 1: Rigid PVC fitting
EAS 168:2014 - Junction boxes for use in electrical installations — Specification
(2nd Edition)
EAS 178-1:2007 - Flexible PVC conduits for electrical wiring — Specification — Part
1: Plain conduits
EAS 178-2:2007 - Flexible PVC conduits for electrical wiring — Specification — Part
2: Corrugated conduits
NIS 36:1974 - Specification for unplasticized polyvinyl chloride (UPVC) conduits for
electrical installation.
NIS 1386-1:1996 – Conduit systems for electrical installations – Part 1: General
requirements
ZNS 63:2015 - Specification for non-metallic conduits for electrical installations - Part
1: Rigid PVC conduits
3.
Cables and cords
Page 3 of 46
IEC 60227-1: 2007 – Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V – Part 1: General Requirement
IEC 60227-3:1997 Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V – Part 3: Non-sheathed cables for fixed wiring
IEC 60227-4:1997 Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V – Part 4: Sheathed cables for fixed wiring
IEC 60227-5:2011 Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V – Part 5: Flexible Cables(Cords)
IEC 60227-6:2001 Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V – Part 6: Lift cables and Cables for Flexible connections
IEC 60227-7:2012 Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V – Part 7: Screened and unscreened flexible cables with two or
more conductors.
IEC 60245-1:2008 Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Part 1 – General Requirements
IEC 60245-3:1994 Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Part 3 – Heat resistant silicone insulated cables
IEC 60245-4:2011 Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Part 4 – Cords and Flexible Cables
IEC 60245-5:1994 Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Part 5 – Lift cables
IEC 60245-6:1994 Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Part 6 – Arc welding electrode cables
IEC 60245-7:1994 Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Part 7 – Heat resistant ethylene-vinyl acetate rubber insulated cables
IEC 60245-8:2012 Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Part 8 – Cords for applications requiring high flexibility
IEC 60502-1:2009 - Power cables with extruded insulation and their accessories for
rated voltages from 1kV (Um = 1,2 kV) up to 30 kV (Um = 36kV) – Part 1: Cables for
rated voltages of 1kV (Um = 1,2 kV) and 3 kV ( Um = 3,6kV)
IEC 60502-2:2014 - Power cables with extruded insulation and their accessories for
rated voltages from 1kV (Um = 1,2 kV) up to 30 kV (Um = 36kV) – Part 2: Cables for
rated voltages of 6 kV (Um = 7,2 kV) up to 30 kV ( Um = 36 kV)
IEC 60502-4:2010 - Power cables with extruded insulation and their accessories for
rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 4: Test
requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV)
up to 30 kV (Um = 36 kV)
IEC 61089:1991 - Round wire concentric lay overhead electrical stranded
conductors
US IEC 60227-1:2007 - Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V — Part 1: General requirements (2nd Edition)
Philippine
Accreditation
Bureau
US IEC 60227-3:1997 - Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V — Part 3: Non-sheathed cables for fixed wiring
US IEC 60227-4:1997 - Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V — Part 4: Sheathed cables for fixed wiring
US IEC 60227-5:2011 - Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V — Part 5: Flexible cables (cords)
US IEC 60227-6: 2001 - Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V — Part 6: Lift cables and cables for flexible connections
US IEC 60227-7:2012 - Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V — Part 7: Flexible cables screened and unscreened with
two or more conductors
US IEC 60228:2004 - Conductors of insulated cables
US IEC 60245-1:2007 - Rubber insulated cables — Rated voltages up to and
including 450/750 V — Part 1: General requirements
US IEC 60245-3:1994 - Rubber insulated cables — Rated voltages up to and
including 450/750 V — Part 3: Heat resistant silicone insulated cables
US IEC 60245-4:2011 - Rubber insulated cables — Rated voltages up to and
including 450/750 V — Part 4: Cords and flexible cables
US IEC 60245-5:1994 - Rubber insulated cables — Rated voltages up to and
including 450/750 V — Part 5: Lift cables
US IEC 60245-6:1994 - Rubber insulated cables — Rated voltages up to and
including 450/750 V — Part 6: Arc welding electrode cables
US IEC 60245-7:1994 - Rubber insulated cables — Rated voltages up to and
including 450/750 V — Part 7: Heat resistant ethylene-vinyl acetate rubber insulated
cables
US IEC 60245-8:2012 - Rubber insulated cables — Rated voltages up to and
including 450/750 V — Part 8: Cords for applications requiring high flexibility
US IEC 60502-1:2009 - Power cables with extruded insulation and their accessories
for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables
for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
US IEC 60502-2:2014 - Power cables with extruded insulation and their accessories
for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 2: Cables
for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
US IEC 60502-4:2010 - Power cables with extruded insulation and their accessories
for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 4: Test
requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV)
up to 30 kV (Um = 36 kV)
US IEC 60888:1987 - Zinc-coated steel wires for stranded conductors
US IEC 60889:1987 - Hard-drawn aluminium wire for overhead line conductors
US EAS 497:2008 - Colours of the cores of flexible cables and cords
US EAS 498-2:2008 - Low-frequency cables and wires with PVC insulation and PVC
sheath — Part 2: Cables in pairs, triples, quads and quintuples for inside installations
US EAS 498-3:2008 - Low-frequency cables and wires with PVC insulation and PVC
sheath — Part 3: Equipment wires with solid or stranded conductor wires, PVC
insulated, in singles, pairs and triples
US IEC 60104:1987 - Aluminium-magnesium-silicon alloy wire for overhead line
conductors
US EAS 507:2008 - Aluminium-magnesium-silicon alloy wire for overhead line
conductors
US EAS 512:2008 - Thermal-resistant aluminium alloy wire for overhead line
conductor
US EAS 513:2008 - Overhead electrical conductors — Formed wire, concentric lay,
stranded conductors
US 601:1995 - Standard specification for PVC - Insulated cables for electricity
supplies
US 602:1995 - Standard specification for PVC - Insulated cables (non armoured) for
electric power and lighting
US 604:1995 - Standard specification for PVC insulation and sheath of electric
cables
US 605:1995 - Standard Specification for conductors in insulated cables and cords
Page 4 of 46
Philippine
Accreditation
Bureau
US 611:1995 - Standard specification for aluminium stranded conductors and
aluminium stranded conductors, steel-reinforced for overhead power transmission
Aluminium stranded conductors
KS 187:1987 (Confirmed, 2013) - Specification for conductors of insulated cables
(Second Edition)
KS 188-1:1997 (Confirmed, 2013) - Specification for PVC insulations and sheaths
of electric cables and cords - Part 1: Physical and electrical requirements
KS 189:1979 (Confirmed, 2013) - Specification for aluminium stranded conductors
for overhead power lines
KS 190-1:1987 (Confirmed, 2013) - Specification for stranded aluminium conductors
steel-reinforced and galvanized steel wires for reinforcing aluminium conductors Part 1: Galvanized steel wires for reinforced aluminium conductors
KS 190-2:1987 (Confirmed, 2013) - Specification for stranded aluminium conductors
steel-reinforced and galvanized steel wires for reinforcing aluminium conductors Part 2: Aluminium conductors steel-reinforced
KS 192:1987 (Confirmed, 2013) - Specification for PVC insulated flexible cables
and cords or rated voltage up to and including 450/750 V (Second Edition)
KS 290:1981 (Confirmed, 1999) - Specification for mild steel wire for armouring of
electric cables
KS 314-1:1982 (Confirmed, 2015) - Specification for cables for vehicles - Part 1:
Cables with copper conductors
KS 1022:2016 - 600/1000 V PVC insulated single-phase concentric cables with
copper or aluminium conductors for electricity supply - Specification
KS 1069:1991 (Confirmed, 2017) - Specification for PVC covered conductors for
overhead power lines
KS 1637:2001 (Confirmed, 2017) - Specification for welding cables
KS 2704:2017 - Aerial bundled conductor accessories - Specification
KS 2705:2018 – Telecommunication drop wire - Specification
KS IEC 60189-1:2007 (Confirmed, 2016) - Low-frequency cables and wires with
PVC insulation and PVC sheath - Part 1: General test and measuring methods
KS IEC 60189-2:2007 (Confirmed, 2016) - Low-frequency cables and wires with
PVC insulation and PVC sheath – Part 2: Cables in pairs, triples, quads and
quintuples for inside installations
KS IEC 60227-1: 2007 (Adopted, 2017) - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V - Part 1: General requirements.
KS IEC 60227-3:1997 (Adopted, 2017) - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed
wiring.
KS IEC 60227-4:1997 (Adopted, 2017) - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring.
KS IEC 60227-5:2011 (Adopted, 2017) - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V - Part 5: Flexible cables (cords).
KS IEC 60227-6:2001 (Adopted, 2017) - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible
connections.
KS IEC 60227-7:2003 (Adopted, 2017) - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V - Part 7: Flexible cables screened and
unscreened with two or more conductors
KS IEC 60228:2004 (Adopted, 2016) – Conductors of insulated cables
KS IEC 60245-1:2003 (Adopted, 2017) - Rubber insulated cables - Rated voltages
up to and including 450/750 V - Part 1: General requirements.
KS IEC 60245-3:1994 (Adopted, 2017) - Rubber insulated cables - Rated voltages
up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables.
KS IEC 60245-4:2011 (Adopted, 2017) - Rubber insulated cables - Rated voltages
up to and including 450/750 V - Part 4: Cords and flexible cables.
KS IEC 60245-5:1994 (Adopted, 2017) - Rubber insulated cables - Rated voltages
up to and including 450/750 V - Part 5: Lift cables.
KS IEC 60245-6:1994 (Adopted, 2017) - Rubber insulated cables - Rated voltages
up to and including 450/750 V - Part 6: Arc welding electrode cables.
Page 5 of 46
Philippine
Accreditation
Bureau
KS IEC 60245-7:1994 (Adopted, 2017) - Rubber insulated cables - Rated voltages
up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber
insulated cables.
KS IEC 60245-8:2004 (Adopted, 2017) - Rubber insulated cables -Rated voltages
up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility.
KS IEC 60502-1:2004 - Power cables with extruded insulation and their accessories
for rated voltages from 1kV (Um = 1,2 kV) up to 30 kV (Um = 36kV) - Part 1: Cables
for rated voltages of 1kV (Um = 1,2 kV) and 3 kV ( Um = 3,6kV)
KS IEC 60502-2:2014 (Adopted, 2016) - Power cables with extruded insulation and
their accessories for rated voltages from 1kV (Um = 1,2 kV) up to 30 kV (Um = 36kV)
- Part 2: Cables for rated voltages of 6 kV (Um = 7,2 kV) up to 30 kV ( Um = 36 kV)
KS IEC 60502-4:2010 (Adopted, 2016) - Power cables with extruded insulation and
their accessories for rated voltages from 1kV (Um = 1,2 kV) up to 30 kV (Um = 36kV)
- Part 4: Test requirements on accessories for cables with rated voltages from 6 kV
(Um = 7,2 kV) up to 30 kV (Um = 36 kV)
KS EAS 114:1999 (Confirmed, 2016) - PVC-insulated cables (non-armoured) for
electrical power and lighting – Specification
KS EAS 116:1999 – Copper conductors in insulated cables - Specification
TZS 7-1: 2015 – All aluminium conductors (ACC) for overhead power transmission
– Specification
TZS 7-2: 2015 - Aluminium conductors, galvanized steel reinforced (ACSR) –
Specification
TZS 104: 2015 - Aluminium PVC insulated conductors for overhead power service
lines – Specification
TZS 105: 1982 - Insulated cables – Copper conductors – Specification
TZS 107: 1982 - PVC – Insulated cables (Non-Armoured) for electrical power and
lighting – Specification
TZS 108: 2002 - Electric cables – Flexible cords rated up to 300/500 V, for use with
appliances and equipment intended for domestic, office and similar environments
TZS 1227: 2012 - PVC insulated, armoured cables for voltages of 600/1000 V and
1900/3300 V
TZS 1518 -1: 2012 / EAS 499-1:2008 - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/ 750 V – Part 1: General requirements
TZS 1518 -3: 2012 / EAS 499-3:2008 - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V – Part 3: None sheathed cables for fixed
wiring
TZS 1518 -4: 2012 (1st Ed) / EAS 499-4:2008 - Polyvinyl chloride insulated cables
of rated voltages up to and including 450/750 V – Part 4: Sheathed cables for fixed
wiring
TZS 1518 -5: 2012(1st Ed) / EAS 499-5:2008 - Polyvinyl chloride insulated cables of
rated voltages up to and including 450/750 V – Part 5: Flexible cables (Cords)
TZS 1518 -6: 2012 / EAS 499-6:2008 - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V – Part 6: Lift cables and cables for flexible
connections
TZS 1518 -7: 2012 / EAS 499-7:2008 - Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V – Part 7: Flexible cables screened and
unscreened with two or more conductors
TZS 1518 -8: 2016 - Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V – Part 8: Single core, flat twin and 3-core sheathed cables for
fixed wiring
TZS 1519: 2012 / EAS 501:2008 - Conductors of insulated cables
TZS 1912:2016 - Electric cables - Thermosetting insulated, armoured cables for
voltages of 600/ 1 000 V and 1 900/ 3 300 V
TZS 2019-1:2017 - Coaxial communication cables — Part 1\: Generic specification
— General, definitions and requirements
EAS 111: 1999 - All Aluminium Conductors (AAC) for overhead power transmission
— Specification
EAS 112: 1999 - Aluminium conductors, Galvanized steel reinforced (ACSR) for
overhead power transmission — Specification
Page 6 of 46
Philippine
Accreditation
Bureau
EAS 114: 1999 - PVC Insulated cables (non-armoured) for electric power and
lighting — Specification
EAS 116:1999 - Copper conductors in insulated cables — Specification
EAS 117:1999 - Insulated flexible cables — Specification
NIS/IEC 60227-1: 2003 - Conduit Systems for Electrical Installations – Pt-1: General
Requirement
NIS/IEC 60227-3 Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
NIS/IEC 60227-4: 2003 Polyvinyl chloride insulated cables of rated voltages up to
and including 450/750 V - Part 4: Sheathed cables for fixed wiring
NIS/IEC 60245-1:1998 - Rubber Insulated Cables-Rated Voltage up to and Including
450/750V – Pt – 1 – General Requirements
NIS/IEC 60245-3: 1994 - Rubber Insulated Cables-rated Voltage up to and Including
450/750V – Pt –3 – Heat Resistance Silicone Insulated Copper
NIS/IEC 60245-4:2004 - Rubber Insulated Cables-rated Voltage up to and Including
450/750V – Pt –4- Cords and Flexible Cables
NIS/IEC 60245-5:1994 - Rubber Insulated Cables-rated Voltage up to and Including
450/750V – Pt –5- Lift Cables
NIS/IEC 60502-1:2004 - Power Cables with Extruded Insulation and their
Accessories for Rated Voltage from 1kV (Um=1.2kV) up to 30kV (Um = 36kV) – Pt.
1: Cables for Rated Voltage of 1kV (Um=1.2kV) and 3 kV (Um = 3.6kV)
NIS/IEC 60502-2:2005 - Power Cables with Extruded Insulation and their
Accessories for Rated Voltage from 1kV (Um = 1.2kV) up to 30kV (Um = 36kV) – Pt
2: Cables for Rated Voltage of 6kV (Um=7.2kV) up to 30kV (Um = 36kV)
NIS 89:1980 - Wrought aluminum for electrical purposes.
NIS 155:1992 - Standard on aluminum conductors in insulated cables.
NIS 159:1992 - Standard on copper conductors in insulated electric cables and
flexible cords.
NIS 172: 1983 - Standard for PVC Insulated Cables, Electric Power and Lighting
NIS 225: 1986 - Standard Specification for Aluminum Stranded Conductor
NIS 231:1987 - Specification for aluminum stranded conductors for overhead power
transmission
NIS 232:1987 - Specification for stranded conductors for overhead power
transmission
NIS 233:1987 - Specification for galvanized steel wire for aluminum conductors,
steal reinforces.
NIS 234:1987 - Specification for aluminum conductors, steel reinforced for overhead
power transmission.
NIS 245:1988 - Standard on raw copper for use for electrical purposes.
NIS 276:1990 - Specification for galvanized mild steel wire and tape for armoured
cables.
NIS 357:1997 - Standard for insulated flexible cords and cables.
NIS 359:1997 - Standard for low frequency cables and wires with PVC
insulation/PVC sheathead.
NIS 382:1997 - PVC insulated cables for electricity supply.
NIS 428:2000 - Specification for low frequency cables and wire with PVC insulation
and PVC sheath.
NIS 429:2000 - Specification for low frequency cables and wires with PVC insulator
and sheath distribution wires
CES 107:2013 - Polyvinyl chloride insulated cables of rated voltage up to and
including 450/750V Part 7: Flexible cable screened and unscreened with wo or more
conductors
CES 110:2013 - Polyvinyl chloride insulated cables of rated voltage up to and
including 450/750V
CES 111:2013 - Polyvinyl chloride sheathed including cables for fixed wiring of rated
voltage up to and including 450/750V- Part 3:Non-sheathed cables for fixed wire
CES 112:2013 - Polyvinyl chloride sheathed including cables for fixed wiring of rated
voltage up to and including 450/750V – Part 4: Sheathed cables for fixed wiring
CES 113:2013 - Polyvinyl chloride sheathed including cables for fixed wiring of rated
voltage up to and including 450/750V- Part 5: Flexible cables (cords)
Page 7 of 46
Philippine
Accreditation
Bureau
CES 114:2013 - Polyvinyl chloride insulated lift cables and cables for flexible
connections of rated voltage up to and including 450/750V – Part 6: Lift cables and
cables for flexible connections
ZNS 9:2014 - Insulated cable –Copper Conductor – Specification
ZNS 62:2015 - Electrical cables- Flame- retardant characteristics – Specification
ZNS 65:2015 - PVC- insulated cables for electricity supply – specification
ZNS 66:2015 - PVC - Insulated cables (non - armored) for electrical power and
lighting – Specification
ZNS 103:2015 - PVC insulated, armored cables for voltages of 600/1000 V and
1900/3300 V
4.
5.
Enamelled copper
wire
IEC 60317 Family of standards
Low-voltage
switchgear and
controlgear
assemblies
IEC 60898-1: 2015 - Electrical accessories - Circuit-breakers for overcurrent
protection for household and similar installations - Part 1: Circuit-breakers for a.c.
operation
IEC 60898-2:2016 – Electrical accessories - Circuit- breakers for overcurrent
protection for household and similar installations - Part 2: Circuit breakers for AC
and DC. operation
IEC 60947-1:2014 - Low-voltage switchgear and controlgear - Part 1: General
requirements
IEC 60947-2:2016 - Low-voltage switchgear and controlgear - Part 2: Circuitbreakers
IEC 60947-3:2015 - Low-voltage switchgear and controlgear - Part 3: Switches,
disconnectors, switch disconnectors and fuse combinations
IEC 60947-4-1:2018 - Low-voltage switchgear and controlgear -- Part 4-1:
Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-2:2011 - Low-voltage switchgear and controlgear - Part 4-2: Contactors
and motor starters - AC semiconductor motor controllers and starters
IEC 60947-4-3:2014 - Low-voltage switchgear and controlgear - Part 4-3: Contactors
and motor starters - AC semiconductor controllers and contactors for non-motor
loads
IEC 60947-5-1:2016 - Low-voltage switchgear and controlgear - Part 5: Control
circuit devices and switching elements - Electromechanical control circuit devices
IEC 60947-5-2:2012 - Low-voltage switchgear and controlgear - Part 5: Control
circuit devices and switching elements - Proximity switches
IEC 60947-5-3:2013 - Low-voltage switchgear and controlgear - Part 5-3: Control
circuit devices and switching elements - Requirements for proximity devices with
defined behaviour under fault conditions (PDDB)
IEC 60947-5-5:2016 - Low-voltage switchgear and controlgear - Part 5-5: Control
circuit devices and switching elements - Electrical emergency stop device with
mechanical latching function
IEC 60947-5-7:2003 - Low-voltage switchgear and controlgear - Part 5-7: Control
devices and switching elements - Requirements for proximity with analogue output
IEC 60947-5-8:2006 - Low-voltage switchgear and controlgear - Part 5-8: Control
circuit devices and switching elements – Three-position enabling switches
IEC 60947-5-9:2006 - Low-voltage switchgear and controlgear - Part 5-9: Control
circuit devices and switching elements – Flow-rate switches
IEC 60947-6-1:2013 - Low-voltage switchgear and controlgear - Part 6-1: Multiple
function equipment - Transfer switching equipment
IEC 60947-6-2:2007 - Low-voltage switchgear and controlgear - Part 6-2: Multiple
function equipment - Control and protective switching devices (or equipment) (CPS)
IEC 60947-7-1:2009 - Low-voltage switchgear and controlgear - Part 7-1: Ancillary
equipment - Terminal blocks for copper conductors
IEC 60947-7-2:2009 - Low-voltage switchgear and controlgear - Part 7-2: Ancillary
equipment - Protective conductor terminal blocks for copper conductors
IEC 60947-7-3:2009 - Low-voltage switchgear and controlgear - Part 7-3: Ancillary
equipment - Safety requirements for fuse terminal blocks
IEC 60947-7-4:2013 - Low-voltage switchgear and controlgear - Part 7-4: Ancillary
equipment – PCB terminal blocks for copper conductors
Page 8 of 46
Philippine
Accreditation
Bureau
IEC 60947-8:2011 - Low-voltage switchgear and controlgear - Part 8: Control units
for built-in thermal protection (PTC) for rotating electrical machines
IEC 61439-1:2011 - Low-voltage switchgear and controlgear assemblies - Part 1:
General rules
IEC 61439-2:2011 - Low-voltage switchgear and controlgear assemblies - Part 2:
Power switchgear and controlgear assemblies
IEC 61439-3:2012 - Low-voltage switchgear and controlgear assemblies - Part 3:
Distribution boards intended to be operated by ordinary persons (DBO)
IEC 61439-4:2012 - Low-voltage switchgear and controlgear assemblies - Part 4:
Particular requirements for assemblies for construction sites(ACS)
IEC 61439-5:2014 - Low-voltage switchgear and controlgear assemblies - Part 5:
Assemblies for power distribution in public networks
IEC 61439-6:2012 - Low-voltage switchgear and controlgear assemblies - Part 6:
Busbar trunking systems (busways)
IEC 61439-7:2018 - Low-voltage switchgear and controlgear assemblies - Part 7:
Assemblies for specific applications such as marinas, camping sites, market
squares, electric vehicle charging stations
US IEC 60934:2000 - Circuit breakers for equipment (CBE)
US IEC 60947-1:2004 - Low-voltage switchgear and control gear – Part 1: General
rules
US IEC 60947-2:2003 - Low-voltage switchgear and control gear – Part 2: Circuit
breakers
US IEC 60947-3:1999 - Low-voltage switchgear and control gear – Part 3: Switches,
disconnectors, switch-disconnectors and fuse-combination units
US IEC 60947-4-1:1990 - Low-voltage switchgear and control gear – Part 4-1:
Contactors and motor-starters - Electromechanical contactors and motor- starters
US IEC 60947-4-2:1999 - Low-voltage switchgear and control gear – Part 4-2:
Contactors and motor-starters – AC semiconductor motor controllers and starters
US IEC 60947-4-3:1999 - Low-voltage switchgear and control gear – Part 4-3:
Contactors and motor-starters - A.C. semiconductor controllers and contactors for
non-motor loads
US IEC 60947-5-1:2003 - Low-voltage switchgear and control gear – Part 5-1:
Control circuit devices and switching elements – Electromechanical control circuit
devices
US EAS 375-5:2005 - Low – voltage switchgear and control gear assemblies – Part
5: Particular requirements for assemblies intended to be installed outdoors in public
places – cable distribution cabinets (CDCs) for power distribution in networks
KS 311-1:1987 - Specification for miniature circuit breakers (MCB's)
KS IEC 60947-1:1999 - Specification for low-voltage switchgear and controlgear Part 1: General requirements
KS IEC 60947-2:1996 - Specification for low-voltage switchgear and controlgear Part 2: Circuit-breakers
KS IEC 60947-3:1999 - Specification for low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch disconnectors and fuse combinations
KS IEC 60947- 4-1:2012 (Adopted, 2016) - Low-voltage switchgear and controlgear
- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motorstarters
KS IEC 60947-4-2:2011 (Adopted, 2016) - Specification for low-voltage switchgear
and controlgear - Part 4: Contactors and motor starters - Section 2. AC
semiconductor motor controllers and starters
KS IEC 60947-4-3:2014 (Adopted, 2016) - Specification for low-voltage switchgear
and controlgear - Part 4: Contactors and motor starters - Section 3: AC
semiconductor controllers and contactors for non-motor loads
KS IEC 60947-5-1:2001 - Specification for low-voltage switchgear and controlgear Part 5: Control circuit devices and switching elements - Section 1: Electromechanical
control circuit devices
KS IEC 60947-5-2:2001 - Specification for low-voltage switchgear and controlgear Part 5: Control circuit devices and switching elements - Section 2: Proximity switches
Page 9 of 46
Philippine
Accreditation
Bureau
KS IEC 60947-5-3:2001 - Specification for low-voltage switchgear and controlgear Part 5: Control circuit devices and switching elements - Section 3: Requirements for
proximity devices with defined behaviour under fault conditions (PDF)
KS IEC 60947-5-5:2005 - Specification for low-voltage switchgear and controlgear Part 5: Control circuit devices and switching elements - Section 5: Electrical
emergency stop device with mechanical latching function
KS IEC 60947-5-6:2001 - Specification for low-voltage switchgear and controlgear Part 5: Control circuit devices and switching elements - Section 6: DC interface for
proximity sensors and switching amplifiers (NAMUR)
KS IEC 60947-5-7:2000 - Low-voltage switchgear and controlgear - Part 5-7: Control
devices and switching elements - Section 7: Requirements forproximity with
analogue output
KS IEC 60947-5-8:2006 - Low-voltage switchgear and controlgear - Part 5-8: Control
circuit devices and switching elements – Three-phase position enabling switches
KS IEC 60947-5-9:2006 - Specification for low-voltage switchgear and controlgear Part 5-9: Control circuit devices and switching elements - Flow rate switches
KS IEC 60947-6-1:2005 - Specification for low-voltage switchgear and controlgear Part 6: Multiple function equipment - Section 1: Automatic transfer switching
equipment
KS IEC 60947-6-2:2007 - Specification for low-voltage switchgear and controlgear Part 6: Multiple function equipment - Section 2: Control and protective switching
devices (or equipment) (CPS)
KS IEC 60947-7-1:2001 - Specification for low-voltage switchgear and controlgear Part 7: Ancillary equipment - Section 1: Terminal blocks for copper conductors
KS IEC 60947-7-2:2001 - Specification for low-voltage switchgear and controlgear Part 7: Ancillary equipment - Section 2: Protective conductor terminal blocks for
copper conductors
KS IEC 60947-7-3:2002 - Low-voltage switchgear and controlgear - Part 7-3:
Ancillary equipment - Section 3: Safety requirements for fuse terminal blocks
KS IEC 60947-8:2006 - Low-voltage switchgear and controlgear - Part 8: Control
units for built-in thermal protection (PTC) for rotating electrical machines
KS IEC 60439-1:2001 - Low-voltage switchgear and controlgear assemblies - Part
1: Type-tested and partially type-tested assemblies
KS IEC 60439-2:2005 - Low-voltage switchgear and controlgear assemblies - Part
2: Particular requirements for busbar trunking systems (busways)
KS IEC 60439-3:2001 - Low-voltage switchgear and controlgear assemblies - Part
3: Particular requirements for low-voltage switchgear and controlgear assemblies
intended to be installed in places where unskilled persons have access for their use
- Distribution boards
KS IEC 60439-4:2010 (Confirmed, 2016) - Low-voltage switchgear and controlgear
assemblies - Part 4: Particular requirements for assemblies for construction
sites(ACS)
KS IEC 60439-5:2006 - Low-voltage switchgear assemblies – Part 5: Particular
requirements for assemblies for power distribution in public networks
KS IEC 61439-1:2011 - Low-voltage switchgear and controlgear assemblies
KS IEC 61439-2:2011 - Low-voltage switchgear and controlgear assemblies - Part
2: Power switchgear and controlgear assemblies
KS IEC 61439-3:2012 (Adopted, 2016) - Low-voltage switchgear and controlgear
assemblies - Part 3: Distribution boards intended to be operated by ordinary persons
(DBO)
KS IEC 61439-4:2012 (Adopted, 2016) - Low-voltage switchgear and controlgear
assemblies - Part 4: Particular requirements for assemblies for construction sites
(ACS)
KS IEC 61439-5:2014 (Adopted, 2016) - Low-voltage switchgear and controlgear
assemblies - Part 5: Assemblies for power distribution in public networks
KS IEC 61439-6:2012 (Adopted, 2016) - Low-voltage switchgear and controlgear
assemblies - Part 6: Busbar trunking systems (Busways)
TZS 1348: 2010 - Small power distribution units (ready boards) for single - phase
230V service connections – Requirements
Page 10 of 46
Philippine
Accreditation
Bureau
6.
Household and
similar electrical
appliances
Page 11 of 46
NIS/IEC 60947-2:2003 - Low-voltage switchgear and control gear- part 2: Circuitbreakers
NIS/IEC 60947-4-3:1999 - Low-voltage switchgear and control gear- part 4-3:
Contactors and motor-starters - AC semiconductor controllers and contactors for
non-motor loads
NIS/IEC 60947-5-5:2003 - Low-voltage switchgear and control gear- part 5-5:
Control circuit devices and switching elements - Electrical emergency stop device
with mechanical latching function
NIS/IEC 60947-5-2:2004 - Low-voltage switch gear and control gear- part 5-2:
Control circuit devices and switching elements - Proximity switches
IEC 60335-1:2016 - Household and similar electrical appliances - Safety -- Part 1:
General requirements
IEC 60335-2-2:2016 - Household and similar electrical appliances - Safety -- Part 22: Particular requirements for vacuum cleaners and water-suction cleaning
appliances
IEC 60335-2-3:2015 - Household and similar electrical appliances - Safety -- Part 23: Particular requirements for electric irons
IEC 60335-2-4:2017 - Household and similar electrical appliances - Safety -- Part 24: Particular requirements for spin extractors
IEC 60335-2-5:2018 - Household and similar electrical appliances - Safety -- Part 25: Particular requirements for dishwashers
IEC 60335-2-6:2018 - Household and similar electrical appliances - Safety -- Part 26: Particular requirements for stationary cooking ranges, hobs, ovens and similar
appliances
IEC 60335-2-7:2016 - Household and similar electrical appliances - Safety -- Part 27: Particular requirements for washing machines
IEC 60335-2-8:2018 - Household and similar electrical appliances - Safety -- Part 28: Particular requirements for shavers, hair clippers and similar appliances,
IEC 60335-2-9:2016 - Household and similar electrical appliances - Safety -- Part 29: Particular requirements for grills, toasters and similar portable cooking appliances
IEC 60335-2-10:2008 - Household and similar electrical appliances - Safety -- Part
2-10: Particular requirements for floor treatment machines and wet scrubbing
machines
IEC 60335-2-11:2015 - Household and similar electrical appliances - Safety -- Part
2-11: Particular requirements for tumble dryers
IEC 60335-2-12:2017 - Household and similar electrical appliances - Safety -- Part
2-12: Particular requirements for warming plates and similar appliances
IEC 60335-2-13:2016 - Household and similar electrical appliances - Safety -- Part
2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
IEC 60335-2-14:2016 - Household and similar electrical appliances - Safety -- Part
2-14: Particular requirements for kitchen machines
IEC 60335-2-15:2018 - Household and similar electrical appliances - Safety -- Part
2-15: Particular requirements for appliances for heating liquids
IEC 60335-2-16:2012 - Household and similar electrical appliances - Safety -- Part
2-16: Particular requirements for food waste disposers
IEC 60335-2-17:2015 - Household and similar electrical appliances - Safety -- Part
2-17: Particular requirements for blankets, pads, clothing and similar flexible heating
appliances
IEC 60335-2-21:2018 - Household and similar electrical appliances - Safety -- Part
2-21: Particular requirements for storage water heaters
IEC 60335-2-23:2016 - Household and similar electrical appliances - Safety -- Part
2-23: Particular requirements for appliances for skin or hair care
IEC 60335-2-24:2017 - Household and similar electrical appliances - Safety -- Part
2-24: Particular requirements for refrigerating appliances, ice-cream appliances and
ice makers
IEC 60335-2-25:2015 - Household and similar electrical appliances - Safety -- Part
2-25: Particular requirements for microwave ovens, including combination
microwave ovens
IEC 60335-2-26:2008 - Household and similar electrical appliances - Safety -- Part
2-26: Particular requirements for clocks
Philippine
Accreditation
Bureau
IEC 60335-2-27:2015 - Household and similar electrical appliances - Safety -- Part
2-27: Particular requirements for appliances for skin exposure to ultraviolet and
infrared radiation
IEC 60335-2-28:2008 - Household and similar electrical appliances - Safety -- Part
2-28: Particular requirements for sewing machines
IEC 60335-2-29:2016 - Household and similar electrical appliances - Safety -- Part
2-29: Particular requirements for battery chargers
IEC 60335-2-30:2016 - Household and similar electrical appliances - Safety -- Part
2-30: Particular requirements for room heaters
IEC 60335-2-31:2018 - Household and similar electrical appliances - Safety -- Part
2-31: Particular requirements for range hoods and other cooking fume extractors
IEC 60335-2-32:2013 - Household and similar electrical appliances - Safety -- Part
2-32: Particular requirements for massage appliances
IEC 60335-2-34:2016 - Household and similar electrical appliances - Safety -- Part
2-34: Particular requirements for motor-compressors
IEC 60335-2-35:2016 - Household and similar electrical appliances - Safety -- Part
2-35: Particular requirements for instantaneous water heaters
IEC 60335-2-36:2017 - Household and similar electrical appliances - Safety -- Part
2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs
and hob elements
IEC 60335-2-37:2017 - Household and similar electrical appliances - Safety -- Part
2-37: Particular requirements for commercial electric doughnut fryers and deep fat
fryers
IEC 60335-2-38:2017 - Household and similar electrical appliances - Safety -- Part
2-38: Particular requirements for commercial electric griddles and griddle grills
IEC 60335-2-39:2017 - Household and similar electrical appliances - Safety -- Part
2-39: Particular requirements for commercial electric multi-purpose cooking pans
IEC 60335-2-40:2018 - Household and similar electrical appliances - Safety -- Part
2-40: Particular requirements for electrical heat pumps, air-conditioners and
dehumidifiers
IEC 60335-2-41:2012 - Household and similar electrical appliances - Safety -- Part
2-41: Particular requirements for pumps
IEC 60335-2-42:2017 - Household and similar electrical appliances - Safety -- Part
2-42: Particular requirements for commercial electric forced convection ovens,
steam cookers and steam-convection ovens
IEC 60335-2-43:2017 - Household and similar electrical appliances - Safety -- Part
2-43: Particular requirements for clothes dryers and towel rails
IEC 60335-2-44:2012 - Household and similar electrical appliances - Safety -- Part
2-44: Particular requirements for ironers
IEC 60335-2-45:2012 - Household and similar electrical appliances - Safety -- Part
2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-47:2017 - Household and similar electrical appliances - Safety -- Part
2-47: Particular requirements for commercial electric boiling pans
IEC 60335-2-48:2017 - Household and similar electrical appliances - Safety -- Part
2-48: Particular requirements for commercial electric grillers and toasters
IEC 60335-2-49:2017 - Household and similar electrical appliances - Safety -- Part
2-49: Particular requirements for commercial electric appliances for keeping food
and crockery warm
IEC 60335-2-50:2017 - Household and similar electrical appliances - Safety -- Part
2-50: Particular requirements for commercial electric bains-marie
IEC 60335-2-51:2012 - Household and similar electrical appliances - Safety -- Part
2-51: Particular requirements for stationary circulation pumps for heating and service
water installations
IEC 60335-2-52:2017 - Household and similar electrical appliances - Safety -- Part
2-52: Particular requirements for oral hygiene appliances
IEC 60335-2-53:2017 - Household and similar electrical appliances - Safety -- Part
2-53: Particular requirements for sauna heating appliances and infrared cabins
IEC 60335-2-54:2015 - Household and similar electrical appliances - Safety -- Part
2-54: Particular requirements for surface-cleaning appliances for household use
employing liquids or steam
Page 12 of 46
Philippine
Accreditation
Bureau
IEC 60335-2-55:2008 - Household and similar electrical appliances - Safety -- Part
2-55: Particular requirements for electrical appliances for use with aquariums and
garden ponds
IEC 60335-2-56:2014 - Household and similar electrical appliances - Safety -- Part
2-56: Particular requirements for projectors and similar appliances
IEC-60335-2-58:2017 - Household and similar electrical appliances - Safety -- Part
2-58 : Particular requirements for commercial electric dishwashing machines
IEC 60335-2-59:2009 - Household and similar electrical appliances - Safety -- Part
2-59: Particular requirements for insect killers
IEC 60335-2-60:2017 - Household and similar electrical appliances - Safety -- Part
2-60: Particular requirements for whirlpool baths and whirlpool spas
IEC 60335-2-61:2009 - Household and similar electrical appliances - Safety -- Part
2-61: Particular requirements for thermal-storage room heaters
IEC 60335-2-62:2008 - Household and similar electrical appliances - Safety -- Part
2-62: Particular requirements for commercial electric rinsing sinks
IEC-60335-2-64:2017 - Household and similar electrical appliances - Safety -- Part
2-64 : Particular requirements for commercial electric kitchen machines
IEC 60335-2-65:2015 - Household and similar electrical appliances - Safety -- Part
2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-66:2012 - Household and similar electrical appliances - Safety -- Part
2-66: Particular requirements for water-bed heaters
IEC 60335-2-67:2016 - Household and similar electrical appliances - Safety -- Part
2-67: Particular requirements for floor treatment machines, for commercial use
IEC-60335-2-68:2016 - Household and similar electrical appliances – Safety -Part2-68: Particular requirements for spray extraction appliances
IEC-60335-2-69:2016 - Household and similar electrical appliances - Safety -- Part
2-69: Particular requirements for wet and dry vacuum cleaners, including power
brush, for commercial use
IEC-60335-2-70:2013 - Household and similar electrical appliances - Safety -- Part
2-70: Particular requirements for milking machines
IEC 60335-2-71:2018 - Household and similar electrical appliances - Safety -- Part
2-71: Particular requirements for electrical heating appliances for breeding and
rearing animals
IEC-60335-2-72:2016 - Household and similar electrical appliances - Safety -- Part
2-72 : Particular requirements for automatic machines for floor treatment for
commercial and industrial use
IEC 60335-2-73:2009 - Household and similar electrical appliances - Safety -- Part
2-73: Particular requirements for fixed immersion heaters
IEC 60335-2-74:2009 - Household and similar electrical appliances - Safety -- Part
2-74: Particular requirements for portable immersion heaters
IEC 60335-2-75:2015 - Household and similar electrical appliances - Safety -- Part
2-75: Particular requirements for commercial dispensing appliances and vending
machines
IEC-60335-2-76:2013 - Household and similar electrical appliances - Safety -- Part
2-76 : Particular requirements for electric fence energizers
IEC-60335-2-77:2002 - Household and similar electrical appliances – Safety -- Part
2-77 : Particular requirements for pedestrian controlled mains-operated lawnmowers
IEC 60335-2-78:2008 - Household and similar electrical appliances - Safety -- Part
2-78: Particular requirements for outdoor barbecues
IEC-60335-2-79:2016 - Household and similar electrical appliances - Safety -- Part
2-79: Particular requirements for high pressure cleaners and steam cleaners
IEC 60335-2-80:2015 - Household and similar electrical appliances - Safety -- Part
2-80: Particular requirements for fans
IEC 60335-2-81:2017 - Household and similar electrical appliances - Safety -- Part
2-81: Particular requirements for foot warmers and heating mats
IEC 60335-2-82:2017 - Household and similar electrical appliances - Safety -- Part
2-82: Particular requirements for amusement machines and personal service
machines
IEC 60335-2-83:2008 - Household and similar electrical appliances - Safety -- Part
2-83: Particular requirements for heated gullies for roof drainage
Page 13 of 46
Philippine
Accreditation
Bureau
IEC 60335-2-84:2013 - Household and similar electrical appliances - Safety -- Part
2-84: Particular requirements for toilets
IEC 60335-2-85:2017 - Household and similar electrical appliances - Safety -- Part
2-85: Particular requirements for fabric steamers
IEC 60335-2-86:2018 - Household and similar electrical appliances - Safety -- Part
2-86: Particular requirements for electric fishing machines
IEC 60335-2-87:2018 - Household and similar electrical appliances - Safety -- Part
2-87: Particular requirements for electrical animal-stunning equipment
IEC 60335-2-88:2002 - Household and similar electrical appliances - Safety -- Part
2-88: Particular requirements for humidifiers intended for use with heating,
ventilation, or air-conditioning systems
IEC-60335-2-89:2015 - Household and similar electrical appliances - Safety -- Part
2-89 : Particular requirements for commercial refrigerating appliances with an
incorporated or remote refrigerant condensing unit or compressor
IEC 60335-2-90:2015-Household and similar electrical appliances - Safety -- Part 290: Particular requirements for commercial microwave ovens
IEC 60335-2-91:2008 - Household and similar electrical appliances - Safety -- Part
2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn
edge trimmers
IEC 60335-2-92: 2002 - Household and similar electrical appliances - Safety -- Part
2-92: Particular requirements for pedestrian-controlled mains-operated lawn
scarifiers and aerators
IEC 60335-2-94:2008 - Household and similar electrical appliances - Safety -- Part
2-94: Particular requirements for scissors type grass shears
IEC 60335-2-95:2017 - Safety of household and similar electrical appliances -- Part
2-95: Particular requirements for drives for vertically moving garage doors for
residential use
IEC 60335-2-96:2008- Household and similar electrical appliances - Safety -- Part
2-96: Particular requirements for flexible sheet heating elements for room heating
IEC 60335-2-97:2016 - Household and similar electrical appliances - Safety -- Part
2-97: Particular requirements for drives for rolling shutters, awnings, blinds and
similar equipment
IEC 60335-2-98:2008 - Household and similar electrical appliances - Safety -- Part
2-98: Particular requirements for humidifiers
IEC-60335-2-99:2017 - Household and similar electrical appliances - Safety -- Part
2-99 : Particular requirements for commercial electric hoods
IEC 60335-2-100:2002 - Household and similar electrical appliances - Safety -- Part
2-100: Particular requirements for hand-held mains-operated garden blowers,
vacuums and blower vacuums
IEC 60335-2-101:2014 - Household and similar electrical appliances - Safety -- Part
2-101: Particular requirements for vaporizers
IEC 60335-2-102:2017 - Household and similar electrical appliances - Safety -- Part
2-102: Particular requirements for gas, oil and solid-fuel burning appliances having
electrical connections
IEC-60335-2-103:2017 - Household and similar electrical appliances - Safety -- Part
2-103 : Particular requirements for drives for gates, doors and windows
IEC-60335-2-104:2003 - Household and similar electrical appliances - Safety -- Part
2-104 : Particular requirements for appliances to recover and/or recycle refrigerant
from air conditioning and refrigeration equipment
IEC 60335-2-105:2016 - Household and similar electrical appliances - Safety -- Part
2-105: Particular requirements for multifunctional shower cabinets
IEC 60335-2-106:2007- Household and similar electrical appliances - Safety -- Part
2-106: Particular requirements for heated carpets and for heating units for room
heating installed under removable floor coverings
IEC 60335-2-107:2017 - Household and similar electrical appliances - Safety -- Part
2-107: Particular requirements for robotic battery powered electrical lawnmowers
IEC 60335-2-108:2008 - Household and similar electrical appliances - Safety -- Part
2-108: Particular requirements for electrolysers
IEC 60335-2-109:2016 - Household and similar electrical appliances - Safety -- Part
2-109: Particular requirements for UV radiation water treatment appliances
Page 14 of 46
Philippine
Accreditation
Bureau
IEC 60335-2-110:2013 - Household and similar electrical appliances - Safety -- Part
2-110: Particular requirements for commercial microwave appliances with insertion
or contacting applicators
IEC 60335-2-111:2015 - Household and similar electrical appliances - Safety -- Part
2-111: Particular requirements for electric ondol mattress with a non-flexible heated
part
IEC 60335-2-113:2016 - Household and similar electrical appliances – SafetY -- Part
2-113: Particular requirements for cosmetic and beauty care appliances
incorporating lasers and intense light sources
IEC 60335-2-114:2018 - Household and similar electrical appliances - Safety - Part
2-114: Particular requirements for self-balancing personal transport devices for use
with batteries containing alkaline or other non-acid electrolytes
US IEC 60335-1: 2010 - Household and similar electrical appliances — Safety —
Part 1: General requirements (2nd Edition)
US IEC 60335-2-2:2002 - Household and similar electrical appliances – Safety –
Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning
appliances
US IEC 60335-2-3: 2012 - Household and similar electrical appliances — Safety —
Part 2-3: Particular requirements for electric irons (2nd Edition)
US IEC 60335-2-4:2003 - Household and similar electrical appliances – Safety –
Part 2-4: Particular requirements for spin extractors
US IEC 60335-2-5:2003 - Household and similar electrical appliances – Safety –
Part 2-5: Particular requirements for electric dishwashers
US IEC 60335-2-6: 2008 - ppliances — Safety — Part 2-6: Particular requirements
for stationary cooking ranges, hobs, ovens and similar appliances (2nd Edition)
US IEC 60335-2-7: 2012 - Household and similar electrical appliances — Safety —
Part 2-7: Particular requirements for washing machines (2nd Edition)
US IEC 60335-2-8:2002 - Household and similar electrical appliances – Safety –
Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
US IEC 60335-2-9:2002 - Household and similar electrical appliances – Safety –
Part 2-9: Particular requirements for grills, toasters and similar portable cooking
appliances
US IEC 60335-2-10:2002 - Household and similar electrical appliances – Safety –
Part 2-10: Particular requirements for floor treatment machines and wet scrubbing
machines
US IEC 60335-2-11:2003 - Household and similar electrical appliances – Safety –
Part 2-11: Particular requirements for tumble dryers
US IEC 60335-2-12:2002 - Household and similar electrical appliances – Safety –
Part 2-12: Particular requirements for warming plates and similar appliances
US IEC 60335-2-13:2004 - Household and similar electrical appliances – Safety –
Part 2-13: Particular requirements for deep fat fryers, frying pans and similar
appliances
US IEC 60335-2-14:2002 - Household and similar electrical appliances – Safety –
Part 2-14: Particular requirements for kitchen machines
US IEC 60335-2-15:2003 - Household and similar electrical appliances – Safety –
Part 2-15: Particular requirements for appliances for heating liquids
US IEC 60335-2-21: 2009 - Household and similar electrical appliances — Safety —
Part 2-21: Particular requirements for storage water heaters (2nd Edition)
US IEC 60335-2-23:2003 - Household and similar electrical appliances – Safety –
Part 2-23: Particular requirements for appliances for skin or hair care
US IEC 60335-2-24: 2012 - Household and similar electrical appliances — Safety —
Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances
and ice-makers (2nd Edition)
US 900-1:2011 - Performance of household electrical appliances – Refrigerating
appliances – Part 1: Energy labelling and minimum energy performance standards
requirements
US IEC 60335-2-25:2002 - Household and similar electrical appliances – Safety –
Part 2-25: Particular requirements for microwave ovens, including combination
microwave ovens
Page 15 of 46
Philippine
Accreditation
Bureau
US IEC 60335-2-26:2002 - Household and similar electrical appliances – Safety –
Part 2-26: Particular requirements for clocks
US IEC 60335-2-27:2004 - Household and similar electrical appliances – Safety –
Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and
infrared radiation
US IEC 60335-2-28:2002 - Household and similar electrical appliances – Safety –
Part 2-28: Particular requirements for sewing machines
US IEC 60335-2-29:2004 - Household and similar electrical appliances – Safety –
Part 2-29: Particular requirements for battery chargers
US IEC 60335-2-31:2002 - Household and similar electrical appliances – Safety –
Part 2-31: Particular requirements for range hoods
US IEC 60335-2-32:2002 - Household and similar electrical appliances – Safety –
Part 2-32: Particular requirements for massage appliances
US IEC 60335-2-34:2002 - Household and similar electrical appliances – Safety –
Part 2-34: Particular requirements for motor compressors
US IEC 60335-2-35:2002 - Household and similar electrical appliances – Safety –
Part 2-35: Particular requirements for instantaneous water heaters
US IEC 60335-2-36:2002 - Household and similar electrical appliances – Safety –
Part 2-36: Particular requirements for commercial electric cooking range, ovens,
hobs and hob elements
US IEC 60335-2-37:2002 - Household and similar electrical appliances – Safety –
Part 2-37: Particular requirements for commercial electric deep fat fryers
US IEC 60335-2-38:2002 - Household and similar electrical appliances – Safety –
Part 2-38: Particular requirements for commercial electric griddles and griddle grills
US IEC 60335-2-39:2002 - Household and similar electrical appliances – Safety –
Part 2-39: Particular requirements for commercial electric multi-purpose cooking
pans
US IEC 60335-2-40:2002 - Household and similar electrical appliances – Safety –
Part 2-40: Particular requirements for electrical heat pumps, air- conditioners and
dehumidifiers
US IEC 60335-2-41:2004 - Household and similar electrical appliances – Safety –
Part 2-41: Particular requirements for pumps
US IEC 60335-2-42:2002 - Household and similar electrical appliances – Safety –
Part 2-42: Particular requirements for commercial electric forced convection ovens,
steam cookers and steam-convection ovens
US IEC 60335-2-44:2003 - Household and similar electrical appliances – Safety –
Part 2-44: Particular requirements for ironers
US IEC 60335-2-45:2002 - Household and similar electrical appliances – Safety –
Part 2-45: Particular requirements for portable heating tools and similar appliances
US IEC 60335-2-47:2002 - Household and similar electrical appliances – Safety –
Part 2-47: Particular requirements for commercial electric boiling pans
US IEC 60335-2-48:2002 - Household and similar electrical appliances – Safety –
Part 2-48: Particular requirements for commercial electric grillers and toasters
US IEC 60335-2-49:2002 - Household and similar electrical appliances – Safety –
Part 2-49: Particular requirements for commercial electric hot cupboards
US IEC 60335-2-50:2002 - Household and similar electrical appliances – Safety –
Part 2-50: Particular requirements for commercial electric bains-marie
US IEC 60335-2-51:2002 - Household and similar electrical appliances – Safety –
Part 2-51: Particular requirements for stationary circulation pumps for heating and
service water installations
US IEC 60335-2-53:2002 - Household and similar electrical appliances – Safety –
Part 2-53: Particular requirements for sauna heating appliances
US IEC 60335-2-54:2004 - Household and similar electrical appliances – Safety –
Part 2-54: Particular requirements for surface cleaning appliances for household use
employing liquids or steam
US IEC 60335-2-56:2002 - Household and similar electrical appliances – Safety –
Part 2-56: Particular requirements for projectors and similar appliances
US IEC 60335-2-58:2002 - Household and similar electrical appliances – Safety –
Part 2-58: Particular requirements for commercial electric dishwashing machines
Page 16 of 46
Philippine
Accreditation
Bureau
US IEC 60335-2-59:2002 - Household and similar electrical appliances – Safety –
Part 2-59: Particular requirements for insect killers
US IEC 60335-2-64:2003 - Household and similar electrical appliances – Safety –
Part 2-64: Particular requirements for commercial electric kitchen machines
US IEC 60335-2-67:2002 - Household and similar electrical appliances – Safety –
Part 2-67: Particular requirements for floor treatment and floor cleaning machines,
for industrial and commercial use
US IEC 60335-2-69:2002 - Household and similar electrical appliances – Safety –
Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power
brush, for industrial and commercial use
US IEC 60335-2-70:2004 - Household and similar electrical appliances – Safety –
Part 2-70: Particular requirements for milking machines
US IEC 60335-2-71:2002 - Household and similar electrical appliances – Safety –
Part 2-71: Particular requirements for electrical heating appliances for breeding and
rearing animals
US IEC 60335-2-73:2002 - Household and similar electrical appliances – Safety –
Part 2-73: Particular requirements for fixed immersion heaters
US IEC 60335-2-74:2003 - Household and similar electrical appliances – Safety –
Part 2-74: Particular requirements for portable immersion heaters
US IEC 60335-2-76:2002 - Household and similar electrical appliances – Safety –
Part2-76: Particular requirements for electric fence energizers
US IEC 60335-2-77:2002 - Safety of household and similar electrical appliances –
Part 2-77: Particular requirements for pedestrian controlled mains-operated
lawnmowers
US IEC 60335-2-78:2002 - Household and similar electrical appliances – Safety –
Part 2-78: Particular requirements for outdoor barbecues
US IEC 60335-2-80: 2008 - Household and similar electrical appliances — Safety —
Part 2-80: Particular requirements for fans (2nd Edition)
US IEC 60335-2-82:2002 - Household and similar electrical appliances – Safety –
Part 2-82: Particular requirements for amusement machines and personal service
machines
US IEC 60335-2-89:2002 - Household and similar electrical appliances – Safety –
Part 2-89: Particular requirements for commercial refrigerating appliances with an
incorporated or remote refrigerant condensing unit or compressor
US IEC 60335-2-90:2002 - Household and similar electrical appliances – Safety –
Part 2-90: Particular requirements for commercial microwave ovens
US IEC 60335-2-91:2002 - Household and similar electrical appliances – Safety –
Part 2-91: Particular requirements for walk behind and hand-held lawn trimmers and
lawn hedge trimmers
US IEC 60335-2-103:2003 - Household and similar electrical appliances – Safety –
Part 2-103: Particular requirements for drives for gates, doors and windows
US IEC 60335-2-104:2004 - Household and similar electrical appliances – Part 2104: Particular requirements for appliances to recover and/or recycle refrigerant from
air conditioning and refrigeration equipment
US IEC 60335-2-105:2004 - Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional shower cabinets
KS 236:1982 (Confirmed, 2013) - Specification for refrigerators and freezers
KS 237:1982 (Confirmed, 2013) - Specification for household electric ranges
KS 239:1996 (Confirmed, 2013) - Specification for safety requirements for domestic
and similar electrical appliances (Second Edition)
KS 277:1980 (Confirmed, 2016) - Specification for electric kettles for household and
similar use
KS 278:1983 (Confirmed, 2016) - Specification for portable electric immersion water
heaters
KS 279:1998 (Confirmed, 2013) - Specification for electric irons for household use
(Second Edition)
KS 281:1982 (Confirmed, 1999) - Specification for electric hotplates for use in
household electric ranges
KS 465:1984 (Confirmed, 2013) - Specification for electric soldering irons
Page 17 of 46
Philippine
Accreditation
Bureau
KS 466:1982 (Confirmed, 2013) - Specification for electric food preparation
machines
KS 470:1982 (Confirmed, 2017) - Safety requirements for electrical equipment for
room air-conditioners
KS 633:1986 (Confirmed, 2013) - Specification for electric toasters
KS 1329:1999 (Confirmed, 2013) - Specification for stationary thermal storage
electric heaters
KS 2463:2013 - Non-ducted air conditioners - Testing and rating performance
KS 2464-1:2013 - Performance of household electrical appliances - Refrigeration
appliances - Part 1: Energy consumption and performance
KS 2464-2:2013 - Performance of household electrical appliances - Refrigerating
appliances - Part 2: Minimum energy performance starndard requirements
KS 1111-1:2000 (Confirmed, 2016) - Specification for safety of household and
similar electrical appliances - Part 1: Particular requirements for microwave ovens
KS 1111-2:1993 (Confirmed, 2016) - Specification for household and similar
electrical appliances - Part 2: Particular requirements for vacuum cleaners and water
suction cleaning appliances
KS 1111-3:1994 (Confirmed, 2016) - Specification for safety requirements for
household electrical appliances - Part 3: Particular requirements for dishwashers
KS 1111-4:1993 (Confirmed, 2016) - Specification for safety requirements for
household electrical appliances - Part 4: Particular requirements for washing
machines
KS 1111-5:1991 (Confirmed, 2016) - Specification for safety requirements for
household electrical appliances - Part 5: Particular requirements for battery powered
shavers, hair clippers and similar appliances and their charging and battery
assemblies
KS 1111-6:2000 (Confirmed, 2016) - Specification for safety requirements for
household and similar electrical appliances - Part 6: Particular requirements for
toasters, grills, roasters and similar appliances
KS 1111-7:1997(Confirmed, 2016) - Specification for safety requirements for
domestic and similar electrical appliances - Part 7: Particular requirements for
tumbler dryers
KS 1111-8:1993 (Confirmed, 2016) - Specification for safety requirements for
household and similar electrical appliances - Part 8: Particular requirements for
frying pans, deep fat fryers and similar appliances
KS 1111-9:1990 (Confirmed, 2016) - Specification for safety requirements for
household electrical appliances - Part 9: Requirements for a.c. electric shavers, hair
clippers and similar appliances
KS 1111-10:1993 (Confirmed, 2016) - Specification for household and similar
electrical appliances - Part 10: Particular requirements for appliances for skin and
hair care
KS 1111-11:1995 (Confirmed, 2016) - Specification for household and similar
electrical appliances - Part 11 Particular requirements for electrical clocks
KS 1111-12:1993 (Confirmed, 2016) - Specification for household and similar
electrical appliances - Part 12: Particular requirements for sewing machines
KS 1111-13:1993 - Specification for household and similar electrical appliances Part 13: Particular requirements for room heaters
KS 1111-14:1993 - Specification for household and similar electrical appliances Part 2: Particular requirements for coffee mills and coffee grinders
KS 1111-15:1993 - Specification for household and similar electrical appliances Part 15: Particular requirements for commercial electric ranges, ovens and hob
elements
KS 1111-16:1994 - Specification for household and similar electrical appliances Part 16: Particular requirements for commercial electric deep fryers
KS 1111-17:1995 - Specification for household and similar electrical appliances Part 17 Particular requirements for commercial electric griddles and griddle grills
KS 1111-18:1994 - Specification for household and similar electrical appliances Part 18: Particular requirements for commercial electric multi-purpose cooking pans
KS 1111-19:1995 - Specification for household and similar electrical appliances Part 19: Particular Requirements for commercial electric forced convection ovens
Page 18 of 46
Philippine
Accreditation
Bureau
KS 1111-22:1997 - Safety requirements for household electrical appliances - Part
22: Particular requirements for electric fans and regulators
KS 1111-23:2002 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 23: Particular requirements for instantaneous water heaters
KS 1111-24:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 24: Particular requirements for spin extractors
KS 1111-25:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 25: Particular requirements for refrigerating appliances, ice-cream
appliances and ice-makers
KS 1111-26:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 26: Particular requirements for stationary cooking ranges, hobs,
ovens and similar appliances
KS 1111-27:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 27: Particular requirements for appliances for heating liquids
KS 1111-28:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 26: Particular requirements for ranges hoods
KS 1111-30:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 30: Particular requirements for commercial electric boiling pans
KS 1111-31:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 31: Particular requirements for commercial electric grillers and
toasters
KS 1111-32:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 32: Particular requirements for commercial electric hot cupboards
KS 1111-33:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 33: Particular requirements for sauna heating appliances
KS 1111-34:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 34: Particular requirements for projectors and similar appliances
KS 1111-35:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 35: Particular requirements for insect killers
KS 1111-36:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 36: Particular requirements for floor-treatment and floor-cleaning
machines, for industrial and commercial use
KS 1111-37:2005 (Confirmed, 2013)- Safety of household and similar electrical
appliances - Part 37: Particular requirements for portable immersion heaters
KS 1111-38:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 38: Particular requirements for fabric steamers
KS 1111-39:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 39: Particular requirements for humidifiers intended for use
withheating, ventilation, or air-conditioning systems
KS 1111-40:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 40: Particular requirements for commercial microwave ovens
KS 1111-41:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 41: Particular requirements for walk-behind and hand-held lawn
trimmers and lawn edge trimmers
KS 1111-42:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 42: Particular requirements for pedestrian-controlled mainsoperated lawn scarifiers and aerators
KS 1111-43:2005 (Confirmed, 2013) - Safety of household and similar electrical
appliances - Part 43: Particular requirements for scissors type grass shears
KS 1111-44:2005 - Safety of household and similar electrical appliances - Part 44:
Particular requirements for drives for vertically moving garage doors for residential
use
KS 1111-45:2005 - Safety of household and similar electrical appliances - Part 45:
Particular requirements for drives for rolling shutters, awnings, blinds and similar
equipment
KS 1111-46:2005 - Safety of household and similar electrical appliances - Part 45:
Particular requirements for humidifiers
KS IEC 60335-2-29:2010 (Confirmed, 2016) - Household and similar electrical
appliances - Safety - Part 2-29: Particular requirements for battery chargers
Page 19 of 46
Philippine
Accreditation
Bureau
KS IEC 60335-2-76:2006 - Household and similar electrical appliances - Safety Part 2-76: Particular requirements for electric fence
TZS 448 -1: 1990 / IEC 60335-1:1976 - Safety of household and similar electrical
appliances – Part 1: General requirements
TZS 448-2-1: 1990 - Safety of household and similar electrical appliances – Part 21 – Particular requirements for refrigerators and food freezers
TZS 448-2-2: 1992 - Safety of household and similar electrical appliances – Part 22: Particular requirements for cooking ranges, cooking tables, ovens and similar
appliances for household use
TZS 448-2-3: 1995 - Safety of household and similar electrical appliances – Part 23: Appliances for heating liquids
TZS 448-2-7: 2011 - Safety of household and similar electrical appliances – Part 27: Electric fans
NIS /IEC 60335-1:2004 - Household and similar electrical appliance safety-pt1general requirement.
NIS/IEC 60335-2-2:2004 - Household and similar electrical appliance safety- pt. 22-particular requirement or vacuum cleaners and water suction cleaning appliances.
NIS/IEC 60335-2-3:2005 - Household and similar electrical appliance safety- pt. 23-particular requirements for electric irons.
NIS/IEC 60335-2-6:2005 - Household and similar electrical appliance safety- pt. 26-particular requirement for stationary cooking ranges, hobs ovens and similar
appliances.
NIS/IEC 60335-2-7:2004 - Household And similar electrical appliance safety- pt. 27-particular requirements for washing machines.
NIS/IEC 60335-2-8:2005 - Household and similar electrical appliance safety- pt. 28-particular requirements for shavers, hair clippers and similar appliances
NIS/IEC 60335-2-9:2006 - Household and similar electrical appliance safety- pt. 29-particular requirements for grills, toasters and similar portable cooking appliances.
NIS/IEC 60335-2-10:2002 - Household and similar electrical appliance safefy-pt1particular requirements for floor treatment machine and net treatment machines.
NIS/IEC 60335-2-12:2002 - Household and similar electrical appliance safety-pt 212-particular requirements for warming plates and similar.
NIS/IEC 60335-2-13:2004 - Household and similar electrical appliance safety-pt 213-particular requirements for kitchen machines.
NIS/IEC 60335-2-14:2002 - Household and similar electrical appliance safety-pt-214-particular requirements for kitchen machines.
NIS/IEC 60335-2-15:2005 - Household and similar electrical appliance satety-pt-215-particular requirements for appliances for heating liquids.
NIS/IEC 60335-2-24:2005 - Household and similar electrical appliance safety-pt-224-particular requirements for refrigerating appliances, ice cream appliances and ice
makers.
NIS/IEC 60335-2-25:2005 - Household and similar electrical appliance safety-pt-225-particular requirements for microwave ovens, including combination microwave
ovens.
NIS/IEC 60335-2-36:2006 Electric cooking ranges, bobs ovens and grills for
household use-methods for measuring performance.
NIS 46:1974 - Specification for Room Air Conditioners
NIS 63:1975 - Specification for Table Fan
NIS 64:1975 - Specification for Pedestal fans and Regulators
NIS 65:1975 - Nigerian Specification for Ceiling Fans and Regulator
NIS 311:1997 - Standards for Particular Requirements for Clocks
ZNS 10:2014 - Safety of household and similar electrical appliances – Part 2-1:
Particular requirement for refrigerators and food freezers
ZNS 38:2014 - Safety household and similar electrical appliances – Part 2-2:
Particular requirements for cooking ranges, cooking tables, ovens and similar
appliances for household use
ZNS 39:2014 - Safety household and similar electrical appliances – Part 2-3:
Particular requirements for heating liquids
ZNS 104:2015 - Household and similar electrical appliances – Safety – Part 2- 7:
particular requirements for fans
Page 20 of 46
Philippine
Accreditation
Bureau
ZNS 107:2015 - Household and similar electrical appliances safety. Part 1: General
requirements
ZNS 108:2015 - Code of practice for used electrical and electronic equipment
ES 1498:2016 - Safety requirements of household and similar electrical appliances
Particular requirements for electric storage water heaters
ES 1590:2010 - Safety requirements of household and similar electrical appliances
Particular requirements for electrical kitchen machines
ES 1628:2006 - Safety Requirements of Household and Similar Electrical
Appliances Particular Requirements for Grilles, Toasters, and Similar Portable
Cooking Appliances
ES 1781:2006 - Safety of Household and Similar Electrical Appliance Part 1: General
Requirements
ES 2093:2016 – Methods for Measuring the Performance for Electrical Household
Dishwashers
ES 2738:2005 - Electric Ventilating Fans and Regulators for Household and Similar
Purposes
ES 322:2013 - Safety of Household and Similar Electrical Appliance. Particular
Requirements for Electric Irons
ES 3525:2005 - Safety of Household and Similar Electrical Appliance. Particular
Requirements for Warming Plates and Similar Appliances
ES 3618:2008 - Mechanical Refrigerating Systems Use for Cooling and Heating Safety Requirements
ES 378:2005 - Safety Requirements for Household and Similar Electrical
Appliances-Particular Requirements For Washing Machines
ES 3793:2006 - Safety of Household and Similar Electrical Appliances Particular
Requirements for Refrigerating Appliances, Ice-Cream Appliances and Ice-Makers
ES 3794:2018 - Energy Efficiency of Household and Similar Electrical Appliances
Measurement and Calculation Methods for Energy
ES 3795-1:2016 - Energy Efficiency Label Requirements for Air Conditioners – Part
1: Rooms Air Conditioner (Window-Split) with Fixed Capacity and Fixed Compressor
ES 3795-2:2017 – Energy Efficiency Label Requirements for Air Conditioner – Part
2: Variable Capacity Room Air Conditioner (Window-Split) with Variable Speed
Compressor
ES 406:2005 - Safety of Household and Similar Electrical Appliance. Particular
Requirements for Room Heaters
ES 4100:2006 - Energy Efficiency of Household and Similar Electrical Appliances
Methods for Measuring and Calculation Energy Consumption of Washing Machine
ES 4751:2016 – Clothes Washing Machines for Household Use – Methods for
Measuring the Performance
ES 4814:2013 - Non-ducted air conditioners and heat pumps - Testing and rating for
performance
ES 5047:2006 - Electric Storage Water - Heaters for Household Purposes Methods
for Measuring the Performance
ES 5056-1:2008 - Refrigerating systems and heat pumps - Safety and environment
requirements - Part 1: Basic requirements, definitions, classification and selection
criteria
ES 5056-2:2006 - Refrigerating systems and heat pumps - Safety and environment
requirements - Part 2: Design, construction, testing, marking and documentation
ES 5254-4:2007 - Air Conditioner, liquid chilling packages and heat pumps with
electrically driven compressors for space heating and cooling Part 4: Requirements
ES 5290:2006 - Household and similar electrical appliances- Safety Part2-6:
Particular requirements for stationary cooking ranges, hobs, ovens and similar
appliances
ES 537-1:2011 - Electric Circulating Fans and Regulators Part 1: Performance
Requirements and Construction
ES 537-2:2005 - Safety Requirements for Household and Similar Electrical
Appliances. Particular Requirements Part 2: Safety Requirements (Fans)
ES 5806:2007 - Energy Efficiency of Household and Similar Electrical Appliances
Methods for Measuring and Calculation Energy Consumption for Electric Water
Heaters
Page 21 of 46
Philippine
Accreditation
Bureau
ES 5813:2007 - Household and similar electrical Appliances-Safety Particular
Requirements for Appliances for Heating Liquids
ES 6000-3:2018 - Household Refrigerating Appliances - Characteristics And Test
Methods - Part 3 : Energy Consumption and Volume
ES 6298:2007 - Condensing Units for Refrigeration - Rating Conditions, Tolerances
and Presentation of Manufacturer's Performance Data
ES 6575:2008 - Safety Requirements of Household and Similar Electrical
Appliances Particular Requirements for Dish Washers
ES 6789:2008 - Safety Requirements of Household and Similar Electrical
Appliances - Particular Requirements for Appliances for skin or hair care
ES 6790:2008 - Safety Requirements of Household and Similar Electrical
Appliances-Particular Requirements for Instantaneous Water Heaters
ES 6976:2009 - Safety Requirements of Household and Similar Electrical
Appliances-Particular Requirements for microwave ovens, including combination
ovens
ES 7174:2011 - Safety Requirements of Household and Similar Electrical
Appliances-Particular Requirements for Tumble Dryers
ES 7271:2011 - Safety Requirements of Household and Similar Electrical
Appliances-Particular Requirements for Clothes Dryers and Towel Rails
ES 7274:2011 - Safety Requirements of Household and Similar Electrical
Appliances-Particular Requirements for Portable Immersion Heaters
ES 7278:2016 - Household And Similar Electrical Appliances - Safety - Particular
Requirements For Electrical Heat Pumps, Air-Conditioners And Dehumidifiers
ES 7284:2016 - Household and similar electrical Appliances - Safety Particular
Requirements for Spin Extractors
ES 7820:2014 - Energy Efficiency of Household and Similar Electrical Appliances
Methods for Measuring and Calculating Energy Consumption of Residential
Dishwashers
ES 7821:2014 - Energy Efficiency of Household and Similar Electrical Appliances Methods for Measuring and Calculating Energy Efficiency of Electric Circulating Air
Fans
ES 8000:2017 – Surface Cleaning Appliances – Part 2: Dry Vacuum Cleaners for
Household or Similar Use – Methods for Measuring the Performance
ES 8057:2017 – Energy Efficiency of Household Electrical Appliances – Methods for
Measuring and Calculating Energy Efficiency of Vacuum Cleaners
ES 8058:2017 - Energy Efficiency of Household Electrical Appliances – Methods for
Measuring and Calculating Energy Efficiency of Domestic Ovens
ES 904:2015 - Household and Similar Electrical Appliances-Safety Particular
Requirements for Vacuum Cleaners and Water-Suction Cleaning Appliances
7.
Switches for
household and
similar fixed
electrical
installations
Page 22 of 46
IEC 60669-1:2017 - Switches for household and similar fixed-electrical installations
- Part 1: General requirements
IEC-60669-2-1:2015 - Switches for household and similar fixed-electrical
installations - Part 2-1: Particular requirements - Electronic switches
IEC 60669-2-2:2006 - Switches for household and similar fixed-electrical
installations - Part 2-2: Particular requirements - Electromagnetic remote-control
switches (RCS)
IEC 60669-2-3:2006 - Switches for household and similar fixed-electrical
installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
IEC 60669-2-4:2004 - Switches for household and similar fixed-electrical
installations - Part 2-4: Particular requirements - Isolating switches
IEC 60669-2-5:2013 - Switches for household and similar fixed-electrical
installations - Part 2-5: Particular requirements – Switches and related accessories
for use in home and building electronic systems (HBES)
IEC 60669-2-6:2012 - Switches for household and similar fixed-electrical
installations - Part 2-6: Particular requirements - Fireman's switches for exterior and
interior signs and luminaires
US IEC 60669-1: 2007 - Switches for household and similar fixed-electrical
installations — Part 1: General requirements (2nd Edition)
Philippine
Accreditation
Bureau
US IEC 60669-2-1:2002 - Switches for household and similar fixed electrical
installations – Part 2-1: Particular requirements - Electronic switches
US IEC 60669-2-2:2002 - Switches for household and similar fixed electrical
installations – Part 2: Particular requirements – Section 2: Remote-control switches
(RCS)
US IEC 60669-2-3:1997 - Switches for household and similar fixed electrical
installations – Part 2-3: Particular requirements – Time-delay switches (TDS)
US IEC 60669-2-4:2004 - Switches for household and similar fixed electrical
installations – Part 2-4: Particular requirements – Isolating switches
KS IEC 60669-1:2007 (Confirmed, 2015) – Switches for household and similar fixedelectrical installations – Part 1: General requirements
KS IEC 60669-2-1:2009 (Confirmed, 2015) – Switches for household and similar
fixed-electrical installations – Part 2-1: Particular requirements – Electronic switches
KS IEC 60669-2-2:2006 (Confirmed, 2015) – Switches for household and similar
fixed-electrical installations – Part 2-2: Particular requirements – Electromagnetic
remote-control switches (RCS)
KS IEC 60669-2-3:2006 (Confirmed, 2015) – Switches for household and similar
fixed-electrical installations – Part 2-3: Particular requirements – Time delay
switches (TDS)
KS IEC 60669-2-4:2004 (Confirmed, 2015) – Switches for household and similar
fixed-electrical installations – Part 2-4: Particular requirements – Isolating switches
TZS 771 -1: 2003 - Switches for household and similar fixed electrical installations –
Part 1 – General requirements
TZS 771 -2-1: 2003 - Switches for household and similar fixed electrical installations
– Part 2-1 – Particular requirements – Electronic switches
TZS 771 -2-2: 2003 - Switches for household and similar fixed electrical installations
– Part 2-2 – Particulars requirements – Remote control switches (RCS)
TZS 771 -2-3: 2003 - Particular requirements – Time-delay switches (TDS)
NIS/IEC 60669-1:2000 - Switches for Household and Similar Fixed - Electrical
Installations – Pt-1: 2000: - General Requirements
NIS/IEC 60669-2-1:2002 - Switches for Household and Similar Fixed-electric
Installations – Pt- 2- 1: 2000: Particular Requirements – Electronic Switch
NIS/IEC 60669-2-2:2002 - Switches for Household and Similar Fixed – Electrical
Installations – Pt -2-2: 2000: Particular Requirements Section 2: Remote Control
Switches (RCS)
NIS/IEC 60669-2-3:2002 - Switches for household and similar fixed electrical
installations- P2-3: Particular requirements- Time-delay switches (TDS)
ZNS 105:2015 - Switches for household and similar fixed electrical installations Part 2 - 2 Particular requirements – Remote control switches
8.
Rotating Machines
Page 23 of 46
IEC 60034-1: 2017 - Rotating electrical machines - Part 1: Rating and performance
IEC 60034-15:2009 - Rotating electrical machines - Part 15: Impulse voltage
withstand levels of form-wound stator coils for rotating a.c. machines
IEC 60034-30-1:2014 - Rotating electrical machines - Part 30-1: Efficiency classes
of line operated AC motors (IE code)
IEC TS 60034-30-2:2016 - Rotating electrical machines - Part 30-1: Efficiency
classes of variable speed AC motors (IE code)
ISO 8528-8:2016 - Reciprocating internal combustion engine driven alternating
current generating sets -- Part 8: Requirements and tests for low-power generating
sets
ISO 8528-13:2016 - Reciprocating internal combustion engine driven alternating
current generating sets -- Part 13: Safety
US IEC 60034-1:2004 - Rotating electrical machines – Part 1: Rating and
Performance
US 905-1:2011 - Rotating electrical machines - General requirements - Part 1: Three
phase cage induction motors - High efficiency and Minimum Energy Performance
Standards requirements
US ISO 8528-2:2005 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 2: Engines
Philippine
Accreditation
Bureau
US ISO 8528-3:2005 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 3: Alternating current generators for generating sets
US ISO 8528-4:2005 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 4: Control gear and switchgear
US ISO 8528-5:2013 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 5: Generating sets
US ISO 8528-12:1997 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 12: Emergency power supply to safety services
US ISO 8528-13:2016 - Reciprocating internal combustion engine driven alternating
current generating sets — Part 13: Safety
KS 2449-1:2013 (confirmed 2019) - Rotating electrical machines – General
requirements. Three-phase cage induction motors – Minimum energy performance
standards
KS IEC 60034-1:2010 - Rotating electrical machines Part 1: Rating and performance
KS IEC 60034-3:2007 (confirmed 2019) - Rotating electrical machines Part 3:
Specific requirements for synchronous generators driven by steam turbines or
combustion gas turbines
KS ISO 8528-1:2004 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 1: Application, ratings and performance
KS ISO 8528-2:1993 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 2: Engines
KS ISO 8528-3:1993 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 3: Alternating current generators for generating sets
KS ISO 8528-4:1993 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 4: Controlgear and switchgear
KS ISO 8528-5:1993 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 5: Generating sets
KS ISO 8528-8:1993 - Reciprocating internal combustion engine driven alternating
current generating sets - Part 8: Low-power generating sets - Requirements and
tests
TZS 374 -1: 1988 - Three-phase induction motors – Specification –Part 1: Rating
and performance
TZS 374- 2: 1988 - Three-phase induction motors – Part 2: Dimensions and output
ratings
9.
Lamps/Lighting
equipment and
accessories
Page 24 of 46
IEC 60598-1:2017 - Luminaires - Part 1: General requirements and tests
IEC 60598-2-1:1979 - Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires
IEC 60598-2-2:2011 - Luminaires - Part 2-2: Particular requirements - Recessed
luminaires
IEC 60598-2-3:2011 - Luminaires - Part 2-3: Particular requirements - Luminaires
for road and street lighting
IEC 60598-2-4:2017 - Luminaires - Part 2-4: Particular requirements - Portable
general purpose luminaires
IEC 60598-2-5:2015 - Luminaires - Part 2-5: Particular requirements - Floodlights
IEC 60598-2-7:1982 - Luminaires - Part 2: Particular requirements. Section 7:
Portable luminaires for garden use
IEC 60598-2-8:2013 - Luminaires - Part 2-8: Particular requirements - Hand lamps
IEC 60598-2-9:1987 - Luminaires - Part 2: Particular requirements. Section 9: Photo
and film luminaires (non-professional)
IEC 60598-2-10:2003 - Luminaires - Part 2-10: Particular requirements - Portable
luminaires for children
IEC 60598-2-11:2013 - Luminaires - Part 2-11: Particular requirements - Aquarium
luminaires
IEC 60598-2-12 :2013 - Luminaires - Part 2-12: Particular requirements – Mains
socket-outlet mounted nightlights
IEC 60598-2-13 :2016 - Luminaires - Part 2-13: Particular requirements - Ground
recessed luminaires
IEC 60594-2-14 :2009 - Luminaires - Part 2-14: Particular requirements - Luminaires
for cold cathode tubular discharge lamps (neon tubes) and similar equipment
Philippine
Accreditation
Bureau
IEC 60598-2-17:2017 - Luminaires - Part 2-17: Particular requirements - Luminaires
for stage lighting, television and film studios (outdoor and indoor)
IEC 60598-2-18:1993 - Luminaires - Part 2: Particular requirements - Section 18:
Luminaires for swimming pools and similar applications
IEC 60598-2-19:1981 - Luminaires - Part 2: Particular requirements. Section 19: Airhandling luminaires (safety requirements)
IEC 60598-2-20:2014 - Luminaires - Part 2-20: Particular requirements - Lighting
chains
IEC 60598-2-21 :2014 - Luminaires - Part 2-21: Particular requirements - Rope lights
IEC 60598-2-22:2017 - Luminaires - Part 2-22: Particular requirements - Luminaires
for emergency lighting
IEC 60598-2-23:2000 - Luminaires - Part 2-23: Particular requirements - Extra low
voltage lighting systems for filament lamps
IEC 60598-2-24:2013 - Luminaires - Part 2-24: Particular requirements - Luminaires
with limited surface temperatures
IEC 60598-2-25:1994 - Luminaires - Part 2: Particular requirements - Section 25:
Luminaires for use in clinical areas of hospitals and healthcare buildings
IEC 60064:2005 - Tungsten filament lamps for domestic and similar general lighting
purposes - Performance requirements
IEC 60432-1:2012 - Incandescent lamps - Safety specifications - Part 1: Tungsten
filament lamps for domestic and similar general lighting purposes
IEC 60432-2:2012 - Incandescent lamps - Safety specifications - Part 2: Tungsten
halogen lamps for domestic and similar general lighting purposes
IEC 60432-3:2012 - Incandescent lamps - Safety specifications - Part 3: Tungsten
halogen lamps (non-vehicle)
IEC 60968:2015 - Self-ballasted fluorescent lamps for general lighting services Safety requirements
IEC 60969:2016 - Self-ballasted compact fluorescent lamps for general lighting
services - Performance requirements
IEC 61184:2017 - Bayonet lampholders
IEC 60238:2017 - Edison screw lampholders
IEC 60400:2017 - Lampholders for tubular fluorescent lamps and starterholders
IEC 62035:2016 - Discharge Lamps (excluding fluorescent) - Safety specifications
IEC 61050:1991 - Transformers for tubular discharge lamps having a no-load output
voltage exceeding 1000 V (generally called neon-transformers). General and safety
IEC 60662:2011 - High-pressure sodium vapour lamps – Performance specifications
IEC 61167:2018 - Metal halide lamps – Performance specification
IEC 61347-1:2017 - Lamp controlgear – Part 1: General and safety requirements
IEC 61347-2-1:2013 - Lamp controlgear - Part 2-2: Particular requirements for
starting devices (other than glow starters)
IEC 61347-2-2:2011 - Lamp controlgear - Part 2-2: Particular requirements for d.c.
or a.c. supplied electronic step-down convertors for filament lamps
IEC 61347-2-3:2016 - Lamp control gear - Part 2-3: Particular requirements for a.c.
and/or d.c. supplied electronic control gear for fluorescent lamps
IEC 61347-2-7:2017 - Lamp controlgear - Part 2-7: Particular requirements for
battery supplied electronic controlgear for emergency lighting (self-contained)
IEC 61347-2-8:2006 - Lamp controlgear - Part 2-8: Particular requirements for
ballasts for fluorescent lamps
IEC 61347-2-9:2012 - Lamp controlgear - Part 2-9: Particular requirements for
electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-10:2009 - Lamp controlgear - Part 2-10: Particular requirements for
electronic invertors and convertors for high-frequency operation of cold start
tubular discharge lamps (neon tubes)
IEC 61347-2-11:2017 - Lamp controlgear - Part 2-11: Particular requirements for
miscellaneous electronic circuits used with luminaires
IEC61347-2-12:2010 - Lamp controlgear - Part 2-12: Particular requirements for d.c.
or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-13:2016 - Lamp controlgear - Part 2-13: Particular requirements for
d.c. or a.c. supplied electronic controlgear for LED modules
Page 25 of 46
Philippine
Accreditation
Bureau
IEC 61347-2-14:2018 - Lamp controlgear - Part 2-14: Particular requirements for
d.c. and/or a.c. electronic controlgear for fluorescent induction lamps
IEC 62031:2018 - LED modules for general lighting - Safety specifications
IEC 62384:2011 - DC or AC supplied electronic control gear for LED modules Performance requirements
IEC 61195:2014 - Double-capped fluorescent lamps - Safety specifications
IEC 61199:2014 - Single-capped fluorescent lamps - Safety specifications
IEC 62560:2015 - Self-ballasted LED-lamps for general lighting services by voltage
> 50 V – Safety
IEC 62612:2018 - Self-ballasted LED lamps for general lighting services with supply
voltages > 50 V – Performance requirements
IEC 62717:2015 - LED modules for general lighting – Performance requirements
IEC 62722-1:2014 - Luminaire performance - Part 1: General requirements
IEC 62722-2-1:2014 - Luminaire performance - Part 2-1: Particular requirements for
LED luminaires
IEC 62776:2014 - Double-capped LED lamps designed to retrofit linear fluorescent
lamps - Safety specifications
IEC 62471:2006 - Photobiological safety of lamps and lamp systems
US 150:2000 – Specification for fluorescent lights for use in photovoltaic systems
US 695:2006 - Fluorescent lamps for general lighting
US 902:2011 - Self-ballasted lamps for General Lighting Services (GLS) —
Performance requirements
US 903-1:2011 - Double-capped fluorescent lamps-performance specifications —
Part 1: Minimum Energy Performance Standard (MEPS)
US 904-1:2011 - Performance of electrical lighting equipment-ballasts for fluorescent
lamps — Part 1: Energy labeling and Minimum Energy Performance Standards
requirements
US IEC 60064:2005 - Tungsten filament lamps for domestic and similar general
lighting purposes — Performance requirements
US IEC 60081:2002 - Double – capped fluorescent lamps — Performance
specifications
US IEC 60155:1993 - Glow – starters for fluorescent lamps
US IEC 60188:2001 - High – pressure mercury vapour lamps — Performance
specifications
US IEC 60192:2001 - Low – pressure sodium vapour lamps — Performance
specifications
US IEC 60238:2004 - Edison screw lamp holders
US IEC 60400:1999 - Lamp holders for tubular fluorescent lamps and starter holders
US IEC 60432-1:1999+AMD1:2005+AMD2:2011 - Incandescent lamps — Safety
specifications — Part 1: Tungsten filament lamps for domestic and similar general
lighting purposes
US IEC 60901:1996 - Single-capped fluorescent lamps – Performance specifications
US IEC 60921:2004 - Ballasts for tubular fluorescent lamps — Performance
requirements
US IEC 60968:2015 - Self-ballasted lamps for general lighting services — Safety
requirements
US IEC 60969:2016 - Self-ballasted lamps for general lighting services —
Performance requirements
US IEC 61199:1999 - Single-capped fluorescent lamps– Safety specifications
US IEC 62560:2015 - Self-ballasted LED lamps for general lighting services by
voltage >50 V – Safety specifications
US IEC 62612:2013 + AMD1:2015 – Self-ballasted LED lamps for general lighting
services by voltage >50V – Performance requirements
KS IEC 60598-1:1999 - Luminaires - Part 1: General requirements and tests
KS IEC 60598-2-1:1997 - Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires
KS IEC 60598-2-2:1997 - Luminaires - Part 2: Particular requirements - Section 2:
Recessed luminaires
KS IEC 60598-2-3:2002 - Luminaires - Part 2: Particular requirements - Section 3:
Luminaires for road and street lighting
Page 26 of 46
Philippine
Accreditation
Bureau
KS IEC 60598-2-4:1997 - Luminaires - Part 2: Particular requirements - Section 4:
Portable general purpose luminaires
KS IEC 60598-2-5:1998 - Luminaires - Part 2: Particular requirements - Section 5:
Floodlights
KS IEC 60598-2-6:1996 - Luminaires - Part 2: Particular requirements - Section 6:
Luminaires with built-in transformers for filament lamps
KS IEC 60598-2-7:1994 - Luminaires - Part 2: Particular requirements. Section 7:
Portable luminaires for garden use
KS IEC 60598-2-8:2001 - Luminaires - Part 2: Particular requirements - Section 8:
Handlamps
KS IEC 60598-2-9:1993 - Luminaires - Part 2: Particular requirements. Section 9:
Photo and film luminaires (non-professional)
KS IEC 60598-2-10:2003 - Luminaires - Part 2: Particular requirements. Section 10:
Portable child-appealing luminaires
KS IEC 60598-2-17:1990 - Luminaires - Part 2-17: Particular requirements Luminaires for stage lighting, television and film studios (outdoor and indoor)
KS IEC 60598-2-18:1993 - Luminaires - Part 2: Particular requirements - Section 18:
Luminaires for swimming pools and similar applications
KS IEC 60598-2-19:1997 - Luminaires - Part 2: Particular requirements. Section 19:
Air-handling luminaires (safety requirements)
KS IEC 60598-2-20:2002 - Luminaires - Part 2-20: Particular requirements - Lighting
chains
KS IEC 60598-2-22:1997 - Luminaires - Part 2: Particular requirements - Section 22:
Luminaires for emergency lighting
KS IEC 60598-2-23:2001 - Luminaires - Part 2: Particular requirements - Section 23:
Extra low voltage lighting systems for filament lamps
KS IEC 60598-2-24:1997 - Luminaires - Part 2: Particular requirements - Section
24: Luminaires with limited surface temperatures
KS IEC 60598-2-25:1994 - Luminaires - Part 2: Particular requirements - Section 25:
Luminaires for use in clinical areas of hospitals and healthcare buildings
KS 306:1984 (Confirmed, 2016) - Specification for ballast for use in fluorescent
lamps
KS 308:1982 (Confirmed, 2016) - Specification for ceiling roses
KS 309-1:1985 (Confirmed, 2016) - Specification for lampholders - Part 1: Bayonet
lampholders
KS 309-2:1985 (Confirmed, 2016) - Specification for lampholders - Part 2: Edison
screw
KS 464:1998 (Confirmed, 2013) - Specification for tubular fluorescent lamps
KS 472:2001(Confirmed, 2013) - Specification for lampholders for tubular
fluorescent lamps and starterholders (Second Edition)
KS 473:1983 (Confirmed, 2013) - Specification for starters for fluorescent lamps
KS 1386:1999 (Confirmed, 2013) - Specification for flashlights
KS 1450:1999 (Confirmed, 2013) - Specification for lamps for flashlights
KS 2262:2010 (Confirmed, 2016) - Fluorescent lamps and other lamps containing
mercury – Specification and disposal requirements
KS 2446-1:2013 - Self-ballasted lamps for general lighting services – Part 1:
Minimum energy performance standards (MEPS) requirements
KS 2447-1:2013 - Performance of electrical lighting equipment - Ballasts for
fluorescent lamps - Part 1: Energy labeling and minimum energy performance
standards requirements.
KS 2448-1:2013 - Double-capped flourescent lamps - Performance specification –
Part 1: Minimum energy performance standards (MEPS)
KS IEC 60064:1993 - Tungsten filament lamps for domestic and similar general
lighting purposes - Performance requirements
KS IEC 60432-1:1999 - Incandescent lamps - Safety specifications - Part 1:
Tungsten filament lamps for domestic and similar general lighting purposes
KS IEC 60432-2:1999 - Incandescent lamps - Safety specifications - Part 2:
Tungsten halogen lamps for domestic and similar general lighting purposes
KS IEC 60921:2006 (Confirmed, 2015) - Ballasts for tubular fluorescent lamps —
Performance requirements, First Edition
Page 27 of 46
Philippine
Accreditation
Bureau
KS IEC 60924:1990 - DC supplied electronic ballasts for tubular fluorescent lamps General and safety requirements
KS IEC 60925:1989 - D.C. supplied electronic ballasts for tubular fluorescent lamps
- Performance requirements
KS IEC 60968:1999 - Self-ballasted lamps for general lighting services - Safety
requirements
KS IEC 60969:2001 - Self-ballasted lamps for general lighting services Performance requirements
KS IEC 61184:2008 (Confirmed, 2015) - Bayonet lampholders, First Edition
KS IEC 60238:2008 (Confirmed, 2015) - Edison screw lampholders, First Edition
KS IEC 60400:2008 (Confirmed, 2015) - Lampholders for tubular fluorescent lamps
and starterholders, First Edition
KS IEC 62560:2011 - Self-ballasted LED lamps for general lighting service – Safety
specifications
TZS 407:1989 - Tungsten filament lamps for general lighting service – Specification
TZS 1472: 2011 / IEC 61184:2008 - Bayonet lampholders
TZS 1473: 2011 / IEC 60238:2008 - Edison screw lampholders
CES 106:2013 - Luminaries part 1: General requirements and tests
CES 108:2013 - Self ballasted lamps for general lighting services safety
Requirements
CES 109:2013 - Tungsten filament lamps for domestic and similar general lighting
services - Performance requirements
CES 115:2013 – Incandescent lamps – Safety specification
CES 116:2013 – Self-ballasted lamp for general lighting services – Performance
requirements
CES 117:2013 – Double capped fluorescent lamps – Safety specification
CES 118:2013 – Double capped fluorescent lamps – Performance specification
CES 125:2013 – Marking of electrical equipment with ratings
NIS 03:1972 - Specification for Tungsten Filament Lamps for General Service
NIS 92:1978 - Standard for ceiling roses.
NIS 505:2004 - Specification for Flash Lights
NIS/IEC 61184:1997 - Bayonet Lamp Holders
NIS/IEC 60400:2004 - Lamp Holders for Tubular Fluorescent Lamps and Starter
Holder
NIS 218:2008 - Specification for Bi-Pin Lamp Holders for Tubular Fluorescent Lamp
NIS/IEC 60081:2002 - Double-capped fluorescent lamps- performance
specifications
ZNS 90:2015 - Edison screw lamp holders
ZNS 96:2015 - Bayonet lamp holders
ES 3584:2005 - Self-Ballasted Lamps (With Combined Ballast) for General Lighting
Services – Performance Requirements
ES 3585:2015 – Self-Ballasted Lamps (With Combined Ballast) for General Lighting
Services – Safety Requirements
ES 5274:2006 - Luminaries – Part 2-5: Particular requirements – Flood light
ES 5275:2006 - Luminaries – Part 2-6: Particular requirements. Section 6:
Luminaries with built in transformers for filament lamps
ES 5277:2006 - Luminaries – Part2-8: Particular requirements – Section 8: Hand
lamps
ES 5279:2006 - Luminaries – Part 2: Particular requirements – Section 25:
Luminaries for use in clinical area of hospitals and health care buildings
ES 7800:2015 – Tubular LED Lamps – Safety Requirements
ES 7824:2015 – Tubular LED Lamps – Performance Requirements
ES 7825:2014 - Luminaires - General requirements and tests
ES 7826:2014 - Luminaires – particular requirements luminaires for emergency
lighting
ES 7827:2014 - Luminaires – particular requirements luminaires for road and street
lighting
ES 8027-2:2016 - Luminaire performance Part 2 : Particular requirements for led
luminaires
Page 28 of 46
Philippine
Accreditation
Bureau
10.
Audio, video and
similar electronic
apparatus
IEC 60065:2014 - Audio, Video and similar electronic apparatus - Safety
requirements
IEC 62368-1:2018 - Audio/video, information and communication technology
equipment - Part 1: Safety requirements
US IEC 60065:2005 - Audio, video and similar electronic apparatus – Safety
requirements
US EAS 375:2005 – External TV aerials in the frequency range 30 MHz – 1 GHz Specifications
KS IEC 60065:2010 - Audio, Video and similar electronic apparatus - Safety
requirements
TZS 1954:2017 - Audio, Video and similar electronic apparatus - Safety
requirements (IEC 60065:2014)
EAS 374: 2005 - Audio, video and similar electronic apparatus — Safety
requirements
ES 2501:2016 - Audio, video and similar electronic apparatus - Safety requirements
ES 7993:2016 – Energy Efficiency for Television
IEC 60730-1:2015 - Automatic electrical controls - Part 1: General requirements
IEC 60730-2-3:2006 - Automatic electrical controls for household and similar use Part 2-3: Particular requirements for thermal protectors for ballasts for tubular
fluorescent lamps
IEC 60730-2-5:2017 - Automatic electrical controls - Part 2-5: Particular
requirements for automatic electrical burner control systems
IEC 60730-2-6:2015 - Automatic electrical controls
- Part 2-6: Particular
requirements for automatic electrical pressure sensing controls including mechanical
requirements
IEC 60730-2-7:2015 - Automatic electrical controls - Part 2-7: Particular
requirements for timers and time switches
IEC 60730-2-8:2018 - Automatic electrical controls for household and similar use Part 2-8: Particular requirements for electrically operated water valves, including
mechanical requirements
IEC 60730-2-9:2018 - Automatic electrical controls - Part 2-9: Particular
requirements for temperature sensing control
11.
Switches for
appliances and
automatic controls
for electrical
household
appliances
Page 29 of 46
IEC 60730-2-10:2006 - Automatic electrical controls for household and similar use Part 2-10: Particular requirements for motor starting relays
IEC 60730-2-11:2006 - Automatic electrical controls for household and similar use Part 2-11: Particular requirements for energy regulators
IEC 60730-2-12:2015 - Automatic electrical controls - Part 2-12: Particular
requirements for electrically operated door locks
IEC 60730-2-13:2017 - Automatic electrical controls for household and similar use Part 2-13: Particular requirements for humidity sensing controls
IEC 60730-2-14:2017 - Automatic electrical controls for household and similar use Part 2-14: Particular requirements for electric actuators
IEC 60730-2-15:2017 - Automatic electrical controls for household and similar use Part 2-15: Particular requirements for automatic electrical air flow, water flow and
water level sensing controls
IEC 60730-2-22:2014 - Automatic electrical controls - Part 2-22: Particular
requirements for thermal motor protectors
IEC 61058-1:2016 - Switches for appliances - Part 1: General requirements
IEC 61058-1-1:2016 - Switches for appliances - Part 1-1: Requirements for
mechanical switches
IEC 61058-1-2:2016 - Switches for appliances - Part 1-2: Requirements for
electronic switches
IEC 61058-2-1:2018 - Switches for appliances - Part 2-1: Particular requirements for
cord switches
IEC 61058-2-4:2018 - Switches for appliances - Part 2-4: Particular requirements for
independently mounted switches
IEC 61058-2-5:2018 - Switches for appliances - Part 2-5: Particular requirements for
change-over selectors
Philippine
Accreditation
Bureau
IEC 61058-2-6:2018 - Switches for appliances – Part 2-6: Particular requirements
for switches used in electric motor operated hand-held tools, transportable tools and
lawn and garden machinery
US IEC 61058-1:2001 - Switches for appliances – Part 1: General requirements
US IEC 61058-2-1:1992 - Switches for appliances – Part 2-1: Particular
requirements for cord switches
US IEC 61058-2-4:2003 - Switches for appliances – Part 2-4: Particular
requirements for independently mounted switches
US IEC 61058-2-5:1994 - Switches for appliances – Part 2-5: Particular
requirements for change-over selectors
US EAS 205:2014 – Controls for heating units in household electric ranges —
Specification (2nd
Edition)
KS 934:2004 - Cooker control units - Specification (Second Edition)
KS IEC 60730-1:1999 - Automatic electrical controls for household and similar use
- Part 1: General requirements
KS IEC 60730-2-2:1999 - Automatic electrical controls for household and similar use
- Part 2-2: Particular requirements for thermal motor protectors
KS IEC 60730-2-3:2001 - Automatic electrical controls for household and similar use
- Part 2-3: Particular requirements for thermal protectors for ballasts for tubular
fluorescent lamps
KS IEC 60730-2-4:2002 - Automatic electrical controls for household and similar use
- Part 2-4: Particular requirements for thermal motor protectors for ballasts for motor
compressors of hermetic and semi-hermetic type
KS IEC 60730-2-5:2000 - Automatic electrical controls for household and similar use
- Part 2-5: Particular requirements for automatic electrical burner control systems
KS IEC 60730-2-6:1991 - Automatic electrical controls for household and similar use
- Part 2-6: Particular requirements for automatic electrical pressure sensing controls
including mechanical requirements
KS IEC 60730-2-7:1990 - Automatic electrical controls for household and similar use
- Part 2-7: Particular requirements for timers and time switches
KS IEC 60730-2-8:2000 - Automatic electrical controls for household and similar use
- Part 2-8: Particular requirements for electrically operated water valves, including
mechanical requirements
KS IEC 60730-2-9:2000 - Automatic electrical controls for household and similar use
- Part 2-13: Particular requirements for temperature sensing controls
KS IEC 60730-2-10:1991 - Automatic electrical controls for household and similar
use - Part 2-10: Particular requirements for motor starting relays
KS IEC 60730-2-11:1997 - Automatic electrical controls for household and similar
use - Part 2-11: Particular requirements for energy regulators
KS IEC 60730-2-12:1993 - Automatic electrical controls for household and similar
use - Part 2-12: Particular requirements for electrically operated door locks
KS IEC 60730-2-13:1997 - Automatic electrical controls for household and similar
use - Part 2-13: Particular requirements for humidity sensing controls
KS IEC 60730-2-14:2001 - Automatic electrical controls for household and similar
use - Part 2-14: Particular requirements for electric actuators
KS IEC 60730-2-15:1997 - Automatic electrical controls for household and similar
use - Part 2-15: Particular requirements for automatic electrical water level sensing
controls of the float or electrode-sensor type used in boiler applications
KS IEC 60730-2-16:1997 - Automatic electrical controls for household and similar
use - Part 2-16: Particular requirements for automatic electrical water level operating
controls of the float type for household and similar applications
KS IEC 60730-2-17:2001 - Automatic electrical controls for household and similar
use - Part 2-17: Particular requirements for electrically operated gas valves,
including mechanical requirements
KS IEC 60730-2-18:1997 - Automatic electrical controls for household and similar
use - Part 2-18: Particular requirements for automatic electrical water and air flow
sensing controls, including mechanical requirements
Page 30 of 46
Philippine
Accreditation
Bureau
KS IEC 60730-2-19:2001 - Automatic electrical controls for household and similar
use - Part 2-19: Particular requirements for electrically operated oil valves including
mechanical requirements
KS EAS 205:2001 - Controls for heating units in household electric ranges Specifications
EAS 205: 2014 - Controls for heating units in household electric ranges —
Specification (2nd edition)
NIS/IEC 61058-1:1994 - Switches for Appliances – Pt – 1: General Requirements
12.
Installation
accessories,
connection devices
and protective
devices
Page 31 of 46
IEC 60269-1:2014 - Low-voltage fuses - Part 1: General requirements
IEC 60269-2:2016 - Low-voltage fuses - Part 2: Supplementary requirements for
fuses for use by authorized persons (fuses mainly for industrial application) Examples of standardized systems of fuses A to K
IEC 60269-3:2013 - Low-voltage fuses - Part 3: Supplementary requirements for
fuses for use by unskilled persons (fuses mainly for household or similar
applications) - Examples of standardized systems of fuses A to F
IEC 60127-1:2015 - Miniature fuses - Part 1: Definitions for miniature fuses and
general requirements for miniature fuse-links
IEC 60127-2:2014 - Miniature fuses - Part 2: Cartridge fuse-links
IEC 60127-3:2015 - Miniature fuses - Part 3: Sub-miniature fuse-links
IEC 60127-4:2012 - Miniature fuses - Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types
IEC 60127-6:2014 - Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
IEC 60127-8:2018 - Miniature fuses - Part 8: Fuse resistors with particular
overcurrent protection
IEC 60884-1:2013 - Plugs and socket-outlets for household and similar purposes Part 1: General requirements
IEC 60884-2-1:2006 - Plugs and socket-outlets for household and similar purposes
- Part 2-1: Particular requirements for fused plugs
IEC 60884-2-2:2006 - Plugs and socket-outlets for household and similar purposes
- Part 2-2: Particular requirements for socket-outlets for appliances
IEC 60884-2-3:2006 - Plugs and socket-outlets for household and similar purposes
- Part 2-3: Particular requirements for switched socket-outlets without interlock for
fixed installations
IEC 60884-2-4:2007 - Plugs and socket-outlets for household and similar purposes
- Part 2-4: Particular requirements for plugs and socket-outlets for SELV
IEC 60884-2-5:2017- Plugs and socket-outlets for household and similar purposes Part 2: Particular requirements for adaptors
IEC 60884-2-7:2013 - Plugs and socket-outlets for household and similar purposes
- Part 2-7: Particular requirements for cord extension sets
IEC 60670-1:2015 - Boxes and enclosures for electrical accessories for household
and similar fixed electrical installations - Part 1: General requirements
IEC 60670-21:2016 - Boxes and enclosures for electrical accessories for household
and similar fixed electrical installations - Part 21: Particular requirements for boxes
and enclosures with provision for suspension means
IEC 60670-22:2015 - Boxes and enclosures for electrical accessories for household
and similar fixed electrical installations - Part 22: Particular requirements for
connecting boxes and enclosures
IEC 60670-23: 2016 - Boxes and enclosures for electrical accessories for household
and similar fixed electrical installations - Part 23: Particular requirements for floor
boxes and enclosures
IEC 60670-24: 2011 - Boxes and enclosures for electrical accessories for household
and similar fixed electrical installations - Part 24: Particular requirements for
enclosures for housing protective devices and other power dissipating electrical
equipment
US EAS 168:2014 - Junction boxes for use in electrical installations – Specifications
(2nd Edition)
US EAS 203:2014 - Boxes for enclosure of electrical accessories — Specification
(2nd Edition)
Philippine
Accreditation
Bureau
US IEC 60670-1:2002 - Boxes and enclosures for electrical accessories for
household and similar fixed electrical installations – Part 1: General requirements
US IEC 60670-21:2004 - Boxes and enclosures for electrical accessories for
household and similar fixed electrical installations – Part 21: Particular requirements
for boxes and enclosures with provision for suspension means
US IEC 60670-22:2003 - Boxes and enclosures for electrical accessories for
household and similar fixed electrical installations – Part 22: Particular requirements
for connecting boxes and enclosures
US IEC 60884-1:2005 - Plugs and socket-outlets for household and similar purposes
Safety - Part 1: General requirements
US IEC 60884-2-1:2005 - Plugs and socket-outlets for household and similar
purposes Part 2- 1: Particular requirements for fused plugs
US IEC 60884-2-2:2005 - Plugs and socket-outlets for household and similar
purposes Part 2- 2: Particular requirements for socket-outlets for appliances
US IEC 60884-2-3:2005 - Plugs and socket-outlets for household and similar
purposes - Part 2-3: Particular requirements for switched socket-outlets without
interlock for fixed installations
US IEC 60884-2-4:2005 - Plugs and socket-outlets for household and similar
purposes Part 2- 4: Particular requirements for plugs 'and socket-outlets for SELV
US IEC 60884-2-5:2005 - Plugs and socket-outlets for household and similar
purposes Part 2- 5: Particular requirements for adaptors
US IEC 60282-1:2014 - High-voltage fuses – Part 1: Current-limiting fuses
US IEC 60282-2:2008 - High-voltage fuses – Part 2: Expulsion fuses
KS 1068-1:1991 (Confirmed, 2013) - Specification for domestic metallic metre boxes
- Part: 1 Single phase metering
KS 1107:1991 (Confirmed, 2016) - Specification for 2-pin reversible plug and shaver
socket-outlets
KS 1187:1993 - Specification for metallic clips for electrical wiring
KS 1432-1:1999 (Confirmed, 2013) - Specification for connecting devices for low
voltage circuits for household and similar purposes - Part 1: General requirements
KS 1432-2:1999(Confirmed, 2013) - Specification for connecting devices for low
voltage circuits for household and similar purposes - Part 2: Particular requirements
for connecting devices with screw-type clamping units
KS 1432-3:1999 (Confirmed, 2013) - Specification for connecting devices for lowvoltage circuits for household and similar purposes - Part 3: Particular requirements
for twist-on connecting devices
KS 1432-4:1999 (Confirmed, 2013) - Specification for connecting devices for low
voltage circuits for household and similar purposes - Part 4: Particular requirements
for connecting devices with insulation piercing clamping units
KS EAS 495-1:2009 (Confirmed, 2016) - 13 A plugs, socket-outlets, adaptors and
connection units, Part 1: Specification for rewirable and non-rewirable 13 A fused
plugs, First Edition
KS EAS 495-2:2009 (Confirmed, 2015) - 13 A plugs, socket-outlets, adaptors and
connection units, Part 2: Specification for switched and unswitched socket outlets,
First Edition
KS EAS 495-3:2009 (Confirmed, 2015) - 13 A plugs, socket-outlets, adaptors and
connection units, Part 3: Specification for adaptors, First Edition
KS EAS 495-4:2009 (Confirmed, 2015) - 13 A plugs, socket-outlets, adaptors and
connection units, Part 4: 13 A fused connection units: Switched and unswitched,
First Edition
KS EAS 496:2009 (Confirmed, 2016) - General purpose fuse links for domestic and
similar purposes (primarily for use in plugs) - Specification, First Edition
KS IEC 60127-1:2006 (Adopted 2017) - Miniatures fuses - Part 1: Definitions for
miniature fuses and general requirements for miniature fuse-links
KS IEC 60127-2:2014 (Adopted 2017) - Miniatures fuses - Part 2: Cartridge fuselinks
KS IEC 60127-3:2015 (Adopted 2017) - Miniatures fuses - Part 3: Sub-miniature
fuse-links
KS IEC 60127-4:2005 (Adopted 2017) - Miniatures fuses - Part 4: Universal Modular
Fuse-Links (UMF)
Page 32 of 46
Philippine
Accreditation
Bureau
KS IEC 60127-6:2014 (Adopted 2017) - Miniatures fuses - Part 6: Fuse-holders for
miniature cartridge fuse-links
KS IEC 60269-3:2010 (Confirmed, 2016) - Low- voltage fuses-Part 3:
Supplementary requirements for fuses for use by unskilled persons( fuses mainly for
household and similar application) -Examples of standardized systems of fuses A to
F
KS IEC 60269-4:2009 - Low -voltage fuses - Part 4: Supplementary requirements
for fuse-links for the protection of semiconductor devices
KS IEC 60269-6:2010 (Confirmed, 2012) - Low voltage fuses part 6:supplementary
requirements for fuse- links for the protection of solar photovoltaic energy systems
KS IEC 60670-1:2015 (Adopted, 2017) - Boxes and enclosures for electrical
accessories for household and similar fixed electrical installations - Part 1: General
requirements
KS IEC 60670-21:2004 (Confirmed, 2017) - Boxes and enclosures for electrical
accessories for household and similar fixed electrical installations - Part 21:
Particular Requirements for boxes and enclosures with provision for suspension
means
KS IEC 60670-22:2003 (Confirmed, 2017) - Boxes and enclosures for electrical
accessories for household and similar fixed electrical installations - Part 22:
Particular Requirements for connecting boxes and enclosures
KS IEC 60670-23:2006 (Confirmed, 2017) - Boxes and enclosures for electrical
accessories for household and similar fixed electrical installations - Part 23:
Particular Requirements for floor boxes and enclosure
KS IEC 61643-11:2011 (Adopted, 2017) - Low-voltage surge protective devices Part 11: Surge protective devices connected to low-voltage power systems Requirements and test methods
TZS 556-1:1995 - Boxes for the enclosure of electrical accessories – Part 1\: Meter
boxes – Specification
TZS 611: 1999 - 13A Socket-outlets switched and unswitched – Specification
TZS 612: 1999 - 13A Fused plugs - rewirable and non-rewirable – Specification
TZS 613: 1999 - 13A Fused connection units switched and unswitched –
Specification
TZS 614: 1999 - Junction boxes for use in electrical installations with rated voltages
not exceeding 250V – Specification
EAS 495-1: 2008 - 13 A plugs, socket-outlets, adaptors and connection units — Part
1: Specification for rewirable and non-rewirable 13 A fused plugs
EAS 495-2: 2008 - 13 A plugs, socket-outlets, adaptors and connection units — Part
2: Specification for switched and unswitched socket outlets
EAS 495-3:2008 - 13 A plugs, socket-outlets, adaptors and connection units — Part
3: Specification for adaptors
EAS 495-4: 2008 - 13 A plugs, socket-outlets, adaptors and connection units — Part
4: 13 A fused connection units: Switched and unswitched
EAS 203:2014 - Boxes for enclosure of electrical accessories — Specification (2nd
Edition)
NIS 486:2004 - Specification for 13 A Switched and Unswitched Socket- Outlet
NIS/IEC 1242:1995 - Electrical Accessories – Cable Reels for Household and
Similar Purposes
NIS/IEC 60799:1998 – Electrical accessories – Cord sets and Interconnection cord
sets
NIS/IEC 60884-1:2002 - Plug and Socket-Outlets for Household and Similar
Properties – Pt – 1: General Requirements
NIS/IEC 60884-2-1:1987 - Plug and Socket-outlets for Household and Similar
Properties – Pt – 2 – 1 – Particular Requirements for Fused Plugs
NIS/IEC 60884-2-2:1989 - Plug and Sockets- Outlets for Household and Similar
Properties: Pt-2-2: Particular Requirements for Socket-Outlets for Appliances
NIS/IEC 60884-2-3:1989 - Plug and Sockets-Outlets for Household and Similar
Properties – Pt – 2 – 3: Particular Requirements for Switched Sockets-outlets without
interlock for Fixed Installations
NIS/IEC 60884-2-4:1999 - Plug and Socket-Outlets for Household and similar
Properties – Pt – 2 – 4-: Particular Requirements for Plugs and Sockets for SELV
Page 33 of 46
Philippine
Accreditation
Bureau
13.
Photovoltaic
equipment
Page 34 of 46
NIS/IEC 60884-2-5: 1995 - Plugs and Socket-Outlets for Household and Similar
Properties-Pt-2-5: Particular Requirements for Adaptors
NIS/IEC 60884-2-6:1997 - Plugs and Socket-Outlets for Household and Similar
Properties-Pt-2-6: Particular Requirements for Switched Socket-outlets with
Interlock for Fixed Electrical Installations
NIS/IEC 60670-1:2002 - Boxes and enclosures for electrical accessories for
household and similar fixed electrical installations - P1: General
NIS/IEC 60670-2-1:2004 - Boxes and enclosures for electrical accessories for
household and similar fixed electrical installations - P21: Particular requirements for
boxes and enclosures with provision for suspension means
NIS/IEC 60670-23: 2006 - Boxes and Enclosures for Electrical Accessories for
Household and Similar Fixed Electrical Installations – Pt – 23: Particular
Requirements for Floor Boxes and Enclosures
NIS/IEC 60670-24: 2005 - Boxes and Enclosures for Electricity Accessories for
Household and Similar Fixed Electrical Installations – Pt – 24: Particular
Requirements for Housing Protective Devices and Similar Power Consuming
Devices
ZNS 27:2014 - 13A Fused plugs – Rewirable and non- rewirable – Specification
ZNS 93:2015 - Junction boxes for use in electrical installations with rated voltages
not exceeding 250 V – Specification
ZNS 97:2015 - 13A fused connection units switched and unswitched – Specification
IEC 61730-1:2016 - Photovoltaic (PV) module safety qualification - Part 1:
Requirements for construction
IEC 61215-1: 2016 - Terrestrial photovoltaic (PV) modules - Design qualification and
type approval - Part 1: Test requirements
IEC 61215-1-1:2016 - Terrestrial photovoltaic (PV) modules - Design qualification
and type approval - Part 1-1: Special requirements for testing of crystalline silicon
photovoltaic (PV) modules
IEC 61215-1-2:2016 - Terrestrial photovoltaic (PV) modules - Design qualification
and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium
Telluride (CdTe) based photovoltaic (PV) modules
IEC 61215-1-3:2016 - Terrestrial photovoltaic (PV) modules - Design qualification
and type approval - Part 1-3: Special requirements for testing of thin-film amorphous
silicon based photovoltaic (PV) modules
IEC 61215-1-4:2016 - Terrestrial photovoltaic (PV) modules - Design qualification
and type approval - Part 1-4: Special requirements for testing of thin-film
Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules
US IEC 61215-1:2016 - Terrestrial photovoltaic (PV) modules - Design qualification
and type approval - Part 1: Test requirements (2nd Edition)
US IEC 61215-1-1:2016 - Terrestrial photovoltaic (PV) modules - Design
qualification and type approval- Part 1-1: Special requirements for testing of
crystalline silicon photovoltaic (PV) modules
US IEC 61646: 2008 - Thin-film terrestrial photovoltaic (PV) modules — Design
qualification and type approval
US IEC 62109-1:2010 - Safety of power converters for use in photovoltaic power
systems — Part 1: General requirements
US IEC 62509:2010 - Battery charge controllers for photovoltaic systems —
Performance and functioning
KS 2542:2017 - Off-grid solar photovoltaic lighting kits - Requirements
KS IEC 61215: 2005 - Crystalline silicon terrestrial photovoltaic (PV) module -Design
qualification and type approval
KS IEC 61646:2008 - Thin-film terrestrial photovoltaic (PV) modules - Design
qualification and type approval
KS IEC 61730-1:2004 (Confirmed, 2014) - Photovoltaic (PV) module safety
qualification - Part 1: Requirements for construction
KS IEC/TS 62257-9-5:2013 - Recommendations for small renewable energy and
hybrid systems for rural electrification Part 9-5: Integrated systems — Selection of
standalone lighting kits for rural electrification
KS IEC TS 62124:2004 (Confirmed, 2014) – Photovoltaic (PV) stand-alone systems
– Design verification
Philippine
Accreditation
Bureau
14.
Measurement,
Control and
laboratory
equipment
Page 35 of 46
KS IEC 62109-1:2010 (Confirmed, 2016) - Safety of power converters for use in
photovoltaic power systems Part 1: General requirements
KS IEC 62109-2:2011 (Confirmed, 2012) - Safety of power converters for use in
photovoltaic power systems Part 2: Particular requirements for inverters
KS IEC 62509:2010 - Battery charge controllers for photovoltaic systems Performance and functioning
TZS 877-1:2016 - Terrestrial photovoltaic \(PV\) modules — Design qualification and
type approval – Part 1: Test requirements (IEC 61215-1:2016)
TZS 878: 2006 / EAS 364: 2005 - Crystalline silicon terrestrial photovoltaic (PV)
modules – Design qualification and type approval
TZS 1951-9-5:2017 - Recommendations for small renewable energy and hybrid
systems for rural electrification Part 9-5: Integrated systems — Selection of
standalone lighting kits for rural electrification (IEC 62257-9-5:2016)
TZS 1952:2017 - Off-grid solar photovoltaic lighting kits – Requirements
IEC 61010-1:2016 - Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 1: General requirements
IEC 61010-2-010:2014 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-010: Particular requirements for
laboratory equipment for the heating of materials
IEC 61010-2-011:2016 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-011: Particular requirements for
refrigerating equipment
IEC 61010-2-012:2016 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-012: Particular requirements for
climatic and environmental testing and other temperature conditioning equipment
IEC 61010-2-020:2016 - Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 2-020: Particular requirements for
laboratory centrifuges
IEC 61010-2-030:2017 - Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 2-030: Particular requirements for
testing and measuring circuits
IEC 61010-2-031:2018 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 031: Safety requirements for handheld and hand manipulated probe assemblies for electrical test and measurement
IEC 61010-2-032:2012 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-032: Particular requirements for
hand-held and hand-manipulated current sensors for electrical test and
measurement
IEC 61010-2-033:2012 - Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 2-033: Particular requirements for
hand-held multimeters and other meters, for domestic and professional use, capable
of measuring mains voltage
IEC 61010-2-034:2017 - Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 2-034: Particular requirements for
measurement equipment for insulation resistance and test equipment for electric
strength
IEC 61010-2-040:2015 - Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 2-040: Particular requirements for
sterilizers and washer-disinfectors used to treat medical materials
IEC 61010-2-051:2018 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-051: Particular requirements for
laboratory equipment for mixing and stirring
IEC 61010-2-061:2018 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-061: Particular requirements for
laboratory atomic spectrometers with thermal atomization and ionization
IEC 61010-2-081:2015 - Safety requirements for electrical equipment for
measurement, control and laboratory use – Part 2-081: Particular requirements for
automatic and semi-automatic laboratory equipment for analysis and other purposes
Philippine
Accreditation
Bureau
IEC 61010-2-091:2012 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-091: Particular requirements for
cabinet X-ray systems
IEC 61010-2-101:2015 - Safety requirements for electrical equipment for
measurement, control and laboratory use – Part 2-101: Particular requirements for
in vitro diagnostic (IVD) medical equipment
IEC 61010-2-201:2017 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 2-201: Particular requirements for
control equipment
IEC 61010-2-202:2016 - Safety requirements for electrical equipment for
measurement, control and laboratory use - Part 202: Safety requirements for
electrically operated valve actuators
IEC 62053-11:2016 - Electricity metering equipment (a.c.) - Particular requirements
- Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
IEC 62053-21:2016 - Electricity metering equipment (a.c.) - Particular requirements
- Part 21: Static meters for active energy (classes 1 and 2)
IEC 62053-22:2016 - Electricity metering equipment (a.c.) - Particular Requirements
- Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
IEC 62053-23:2016 - Electricity metering equipment (a.c.) - Particular requirements
- Part 23: Static meters for reactive energy (classes 2 and 3)
IEC 62053-24:2016 - Electricity metering equipment (a.c.) - Particular requirements
- Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S,
1S and 1)
IEC 62053-31:1998 - Electricity metering equipment (a.c.) - Particular requirements
- Part 31: Pulse output devices for electromechanical and electronic meters (two
wires only)
US IEC 62052-11:2003 - Electricity metering equipment (AC) – General
requirements, tests and test conditions – Part 11: Metering equipment
US IEC 62052-21:2004 - Electricity metering equipment (AC) – General
requirements, tests and test conditions – Part 21: Tariff and load control equipment
US IEC 62053-11:2003 - Electricity metering equipment (AC) – Particular
requirements – Part 11: Electromechanical meters for active energy (classes 0.5, 1
and 2)
US IEC 62053-22:2003 - Electricity metering equipment (AC) – Particular
requirements – Part 22: Static meters for active energy (classes 0.2S and 0.5S)
US IEC 62053-23:2003 - Electricity metering equipment (AC) – Particular
requirements – Part 23: Static meters for reactive energy (classes 2 and 3)
US IEC 62053-31:1998 - Electricity metering equipment (AC) — Particular
requirements — Part 31: Pulse output devices for electromechanical and electronic
meters (two wires only)
US IEC 62053-52:2005 - Electricity metering equipment (AC) – Particular
requirements – Part 52: Symbols
KS IEC 62052-11:2003 (Confirmed, 2017) - Electricity metering equipment (a.c.) –
General requirements, tests and test conditions – Part 11: Metering equipment
KS IEC 62052-21:2004 (Confirmed, 2017) - Electricity metering equipment (a.c.) –
General requirements, tests and test conditions – Part 21: Tariff and load control
equipment
KS IEC 62053-11:2003 (Confirmed, 2017) - Electricity metering equipment (a.c.) Particular requirements - Part 11: Electromechanical meters for active energy
(classes 0.5, 1, and 2)
KS IEC 62053-21:2003 (Confirmed, 2017) - Electricity metering equipment (a.c.) Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
KS IEC 62053-22:2003 (Confirmed, 2017) - Electricity metering equipment (a.c.) Particular requirements - Part 22: Static meters for active energy (classes 0.2 S and
0.5 S)
KS IEC 62053-23:2003 (Confirmed, 2017) - Electricity metering equipment (a.c.) Particular requirements - Part 23: Static meters for reactive energy (classes 2 and
3)
Page 36 of 46
Philippine
Accreditation
Bureau
15.
Galvanic cells and
batteries
Page 37 of 46
TZS 629: 2001 - Class 0.5, 1 and 2 alternating current watt-hour meter –
Specification
IEC 60086-1:2015 - Primary batteries - Part 1: General
IEC 60086-2:2015 - Primary batteries - Part 2: Physical and electrical specifications
IEC 60086-3:2016 - Primary batteries - Part 3: Watch batteries
IEC 60086-4:2014 - Primary batteries - Part 4: Safety of lithium batteries
IEC 60086-5:2016 - Primary batteries - Part 5: Safety of batteries with aqueous
electrolyte
IEC 60095-1:2018 - Lead-acid starter batteries - Part 1: General requirements and
methods of test
IEC 60095-2:2009 - Lead-acid starter batteries Part 2: Dimensions of batteries and
dimensions and marking of terminals
IEC 60095-4:2008 - Lead-acid starter batteries Part 4: Dimensions of batteries for
heavy trucks
IEC 60254-1:2005 - Lead-acid traction batteries - Part 1: General requirements and
methods of tests
IEC 60896-11:2002 - Stationary lead-acid batteries - Part 11: Vented types - General
requirements and methods of tests
IEC 60896-22:2004 - Stationary lead-acid batteries - Part 22: Valve regulated types
– Requirements
IEC 61056-1:2012 - General purpose lead-acid batteries (valve-regulated types) Part 1: General requirements, functional characteristics - Methods of test
IEC 61056-2:2012 - General purpose lead-acid batteries (valve-regulated types) Part 2: Dimensions, terminals and marking
IEC 61427-1:2013 - Secondary cells and batteries for renewable energy storage General requirements and methods of test - Part 1: Photovoltaic off-grid application
IEC 61427-2:2015 Secondary cells and batteries for renewable energy storage General requirements and methods of test - Part 2: On-grid applications
IEC 61951-1:2017 - Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary sealed cells and batteries for portable applications Part 1: Nickel-cadmium
IEC 61951-2:2017- Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary sealed cells and batteries for portable applications Part 2: Nickel-metal hydride
IEC 61960-3:2017 - Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary lithium cells and batteries for portable applications Part 3: Prismatic and cylindrical lithium secondary cells and batteries made from
them
IEC 62133-1:2017 - Secondary cells and batteries containing alkaline or other nonacid electrolytes – Safety requirements for portable sealed secondary cells, and for
batteries made from them, for use in portable applications – Part 1: Nickel systems
IEC 62133-2:2017 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for portable sealed secondary lithium cells,
and for batteries made from them, for use in portable applications - Part 2: Lithium
systems
US IEC 61427-1:2013 - Secondary cells and batteries for renewable energy storage
- General requirementsand methods of test - Part 1: Photovoltaic off-gridapplication
US IEC 61427-2:2015 – Secondary cells and batteries for renewable energy storage
– General requirements and methods of test – Part 2: On-grid application
US IEC 60095-1:2006 - Lead-acid starter batteries - Part 1: General requirements
and methods of test
US IEC 60095-2:2009 - Lead-acid starter batteries - Part 2: Dimensions of batteries
and dimensions and making of terminals
US IEC 60086-1: 2011 - Primary batteries — General
US IEC 60086-2: 2011 - Primary batteries — Part 2: Physical and electrical
specifications
US IEC 60086-3: 2011 - Primary batteries — Part 3: Watch batteries
US IEC 60086-4: 2007 - Primary batteries — Part 4: Safety of lithium batteries
US IEC 60086-5: 2011 - Primary batteries — Part 5: Safety of batteries with aqueous
electrolyte
Philippine
Accreditation
Bureau
KS 184-1:2011 - Primary batteries - Specification - Part 1: General
KS 184-2:2011 - Primary batteries - Specification - Part 2: Physical and electrical
specifications
KS 184-3:2012 (Confirmed, 2013) - Specification for Primary Batteries - Part 3:
Watch batteries
KS 184-4:2012 (Confirmed, 2013) - Specification for Primary batteries - Part 4:
Safety of lithium batteries (Fourth Edition)
KS 184-5:2012(Confirmed, 2013) - Primary batteries - Specification - Part 5: Safety
of batteries with aqueous electrolyte
KS 185-1:2007 (Confirmed, 2016) - Lead-acid starter batteries - Part 1: General
requirements and methods of test - Specification (Fourth Edition)
KS 185-2:1990 (Confirmed, 2013) - Specification for lead-acid starter batteries - Part
2: Dimensions of batteries, Dimensions and marking of terminals
KS 869-1:1990 (Confirmed, 2013) - Specification for lead-acid traction batteries or
cells - Part 1: General requirements and methods of test
KS 869-2:1990 (Confirmed, 2013) - Specification for lead-acid traction batteries or
cells – Part 2: Dimensions of cells and marking of polarity on cells
KS 1067-1:1991(Confirmed, 2013) - Specification for lead-acid stationary batteries
- Part 1: General requirements
KS 1067-2:1994 (Confirmed, 2013) - Specification for lead-acid batteries - Part 2:
Requirements for pasted plate type batteries
KS 1709-1: 2009 (Confirmed, 2015) - Batteries for use in photovoltaic power systems
— Specification Part 1: General requirements, Second Edition
KS 1709-2: 2009(Confirmed, 2015) - Batteries for use in photovoltaic power systems
— Specification Part 2: Modified lead acid batteries
KS IEC 61960:2003 (Confirmed, 2015) - Secondary cells and batteries containing
alkaline or other non-acid electrolytes — Secondary lithium cells and batteries for
portable applications, First Edition
KS IEC 60254-1:2005 (Adopted, 2017) - Lead-acid traction batteries - Part 1:
General requirements and methods of tests
KS IEC 60254-2:2008 (Adopted,2017) - Lead-acid traction batteries - Part 2:
Dimensions of cells and terminals and marking of polarity on cells
KS IEC 60622:2002(Adopted, 2017) - Secondary cells and batteries containing
alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic
rechargeable single cells, First Edition
KS IEC 60623:2017 - Secondary cells and batteries containing alkaline or other nonacid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells, First
Edition
KS IEC 60896-11:2002 (Adopted, 2017) - Stationary lead-acid batteries Part 11:
Vented types - General requirements and methods of test
KS IEC 60896-22:2004 (Adopted, 2017) - Stationary lead-acid batteries Part 22:
Valve regulated types – Requirements
KS IEC 61056-1:2012 (Adopted, 2017) - Lead-acid batteries (valve-regulated types)
- Part 1: General requirements, functional characteristics - Methods of test, General
purpose
KS IEC 61056-2:2012 (Adopted, 2017) - Lead-acid batteries (valve-regulated types)
- Part 2: Dimensions, terminals and marking, General purpose
KS IEC 61951-1:2017 - Secondary cells and batteries containing alkaline or other
non-acid electrolytes — Secondary sealed cells and batteries for portable
applications Part 1: Nickel-Cadmium, First Edition
KS IEC 61951-2:2017 - Secondary cells and batteries containing alkaline or other
non acid electrolytes - Secondary sealed cells and batteries for portable applications
- Part 2: Nickel-metal hydride
KS IEC 62133-1:2017 - Secondary cells and batteries containing alkaline or other
non-acid electrolytes - Safety requirements for portable sealed secondary cells, and
for batteries made from them, for use in portable applications - Part 1: Nickel systems
KS IEC 62133-2:2017 - Secondary cells and batteries containing alkaline or other
non-acid electrolytes - Safety requirements for portable sealed secondary cells, and
for batteries made from them, for use in portable applications - Part 2: Lithium
systems
Page 38 of 46
Philippine
Accreditation
Bureau
16.
Transformers,
reactors and power
supplies
Page 39 of 46
KS IEC 62675:2014 (Adopted, 2017) - Secondary cells and batteries containing
alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic
rechargeable single cells
TZS 143-1:2017 - Primary batteries – Part 1: General
TZS 143-2:2017- Primary batteries – Part 2: Physical and electrical specifications
TZS 144-1:2017- Lead acid starter batteries – Part 1: General requirements and
methods of test (IEC 60095-1:2006)
TZS 144-2: 2011 - Lead acid starter batteries – Part 2: Dimensions of batteries and
marking of terminals
TZS 144-3: 2011 - Lead acid starter batteries – Part 3: Dimensions of batteries for
heavy commercial vehicles
TZS 1599:2013 - Secondary cells and batteries containing alkaline or other non\acid electrolytes – Secondary lithium cells and batteries for portable applications
TZS 1911-1:2016 - Secondary cells and batteries for renewable energy storage —
General requirements and methods of test — Part 1\: Photovoltaic off\-grid
application (IEC 61427-1:2013)
EAS 120-1: 1999 - Lead acid starter batteries — Part 1: General requirements and
methods of test (3rd edition)
EAS 120-2: 1999 - Lead-acid starter batteries — Part 2: Dimensions of batteries and
dimentions and marking of terminals
CES 103:2013 - Primary Batteries - Part 1: General
NIS 350:1997 - Standard for Lead Acid Starter Batteries – General Requirements
and Methods of Test
NIS 25:1973 - Standard for Lead-Acid Starter Batteries (Electrical Characteristics)
NIS/IEC 60086-1:2000 - Primary batteries – Pt –1 - General Requirement
NIS/IEC 60086-2:2001 - Primary Batteries – Pt – 2 – Physical and Electrical
Specifications
NIS/IEC 60086-3:2004 - Primary batteries – Pt – 3 – Watch Batteries
NIS/IEC 60086-4:2000 - Primary Batteries – Pt – 4 – Safety of Lithium Batteries
NIS/IEC 60086-5:2005 - Primary batteries – Pt – 5 – Safety of Battery with Aqueous
Electrolyte
NIS 360:1997 - Standard for Lead-Acid Traction Batteries – General Requirement s
and Test Methods
NIS 07:1973 - Specification for Dry Cells and Batteries
ZNS 95:2015 - Primary batteries- Part 1: General
IEC 60076-1:2011 - Power transformers - Part 1: General
IEC 60076-11:2018 - Power transformers - Part 11: Dry-type transformers
IEC 60076-15:2015 - Power transformers - Part 15: Gas-filled power transformers
IEC 61558-1:2017 - Safety of power transformers, power supplies, reactors and
similar products - Part 1: General requirements and tests
IEC 61558-2-1:2007 - Safety of power transformers, power supplies, reactors and
similar products - Part 2-1: Particular requirements and tests for separating
transformers and power supplies incorporating separating transformers for general
applications
IEC 61558-2-2:2007 - Safety of power transformers, power supplies, reactors and
similar products - Part 2-2: Particular requirements and tests for control transformers
and power supplies incorporating control transformers
IEC 61558-2-3:2010 - Safety of transformers, reactors, power supply units and
combinations thereof - Part 2-3: Particular requirements and tests for ignition
transformers for gas and oil burners
IEC 61558-2-4:2009 - Safety of transformers, reactors, power supply units and
similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements
and tests for isolating transformers and power supply units incorporating isolating
transformers
IEC 61558-2-5:2010 - Safety of transformers, reactors, power supply units and
combinations thereof - Part 2-5: Particular requirements and test for transformer for
shavers, power supply units for shavers and shaver supply units
IEC 61558-2-6:2009 - Safety of transformers, reactors, power supply units and
similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements
Philippine
Accreditation
Bureau
and tests for safety isolating transformers and power supply units incorporating
safety isolating transformers
IEC 61558-2-7:2007 - Safety of power transformers, power supplies, reactors and
similar products - Part 2-7: Particular requirements and tests for transformers and
power supplies for toys
IEC 61558-2-8:2010 - Safety of transformers, reactors, power supply units and
combinations thereof - Part 2-8: Particular requirements and tests for transformers
and power supply units for bells and chimes
IEC 61558-2-9:2010 - Safety of transformers, reactors, power supply units and
combinations thereof - Part 2-9: Particular requirements and tests for transformers
and power supply units for class III handlamps for tungsten filament lamps
IEC 61558-2-10:2014 - Safety of transformers, reactors, power supply units and
combinations thereof - Part 2-10: Particular requirements and tests for separating
transformers with high insulation level and separating transformers with output
voltages exceeding 1 000 V
IEC 61558-2-12:2011 - Safety of transformers, reactors, power supply units and
combination thereof - Part 2-12: Particular requirements and tests for constant
voltage transformers and power supply units for constant voltage
IEC 61558-2-13:2009 - Safety of transformers, reactors, power supply units and
similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements
and tests for auto transformers and power supply units incorporating auto
transformers
IEC 61558-2-14:2012 - Safety of transformers, reactors, power supply units and
combinations thereof - Part 2-14: Particular requirements and tests for variable
transformers and power supply units incorporating variable transformers
IEC 61558-2-15:2011 - Safety of transformers, reactors, power supply units and
combinations thereof - Part 2-15: Particular requirements and tests for isolating
transformers for the supply of medical locations
IEC 61558-2-16:2013 - Safety of transformers, reactors, power supply units and
similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements
and tests for switch mode power supply units and transformers for switch mode
power supply units
IEC 61558-2-20:2010 - Safety of power transformers, power supply units and similar
devices - Part 2-20: Particular requirements and tests for small reactors
IEC 62040-1:2017 - Uninterruptible power systems (UPS) - Part 1: Safety
requirements
IEC 61869-1:2007 - Instrument transformers - Part 1: General requirements
IEC 61869-2:2012 - Instrument transformers - Part 2: Additional requirements for
current transformers
IEC 61869-3:2011 - Instrument transformers - Part 3: Additional requirements for
inductive voltage transformers
IEC 61869-4 :2013 - Instrument transformers - Part 4: Additional requirements for
combined transformers
IEC 61869-5:2011 - Instrument transformers - Part 5: Additional requirements for
capacitor voltage transformers
IEC 61869-6 :2016 - Instrument transformers - Part 6: Additional general
requirements for low-power instrument transformers
US IEC 60076-1:2011 - Power transformers – Part 1: General
US IEC 60076-2:2011 - Power transformers – Part 2: Temperature rise for liquidimmersed transformers
US IEC 60076-3:2013 – Power transformers - Part 3: Insulation levels, dielectric
tests and external clearances in air
US EAS 371-4:2005 - Specification for power transformers – Part 4: Specification
for tapping and connectors
US IEC 60076-5:2006 - Power transformers – Part 5: Ability to withstand short circuit
US EAS 371-10:2005 - Power transformers — Specification — Part 10:
Determination of sound levels
US IEC 60686:1980 – Stabilized power supplied, a.c. output
US IEC 62040-1:2013 - Uninterruptible power systems (UPS) — Part 1: General and
safety requirements for UPS
Page 40 of 46
Philippine
Accreditation
Bureau
US IEC 62040-2:2005 - Uninterruptible power systems (UPS) — Part 2:
Electromagnetic compatibility (EMC) requirements (2nd Edition)
KS IEC 60076-1:2011 - Power transformers Part 1: General
KS IEC 60076-11:2004 - Power transformers Part 11: Dry-type transformers
KS IEC 60076-15:2008 - Power transformers Part 15: Gas-filled power transformers
KS IEC 61558-1:2010 (Confirmed, 2016) - Specification for safety of power
transformers, power supply units and similar apparatus - Part 1: General
requirements and tests
KS IEC 61558-2-1:1999 - Safety of power transformers, power supplies and similar
products - Part 2-1: Particular requirements and tests for separating transformers
and power supplies incorporating separating transformer
KS IEC 61558-2-2:2010 (Confirmed, 2016) - Safety of power transformers, power
supplies and similar products - Part 2-2: Particular requirements and tests for control
transformers and power supplies incorporating control transformers
KS IEC 61558-2-3:1999 - Specification for safety of power transformers, power
supply units and similar apparatus - Part 2-3: Particular requirements for ignition
transformers for gas and oil burners
KS IEC 61558-2-4:1999 - Specification for safety of power transformers, power
supply units and similar apparatus - Part 2-4: Particular requirements for isolating
transformers for general use
KS IEC 61558-2-5:1999 - Specification for safety of power transformers, power
supply units and similar apparatus - Part 2-5: Particular requirements for shaver
transformers and shaver supply units
KS IEC 61558-2-6:1999 - Specification for safety of transformers, power supply units
and similar apparatus - Part 2-6: Particular requirements for safety isolating
transformers for general use
KS IEC 61558-2-7:1999 - Specification for safety of power transformers, power
supply units and similar apparatus - Part 2-7: Particular requirements for
transformers for toys
KS IEC 61558-2-8:1998 - Specification for safety of power transformers, power
supply units and similar apparatus - Part 2-8: Particular requirements for bell and
chime transformers
KS IEC 61558-2-13:1999 - Specification for safety of power transformers, power
supply units and similar apparatus - Part 2-13: Particular requirements for autotransformers for general use
KS IEC 61558-2-15:1999 - Specification for safety of power transformers, power
supply units and similar apparatus - Part 2-15: Particular requirements for isolating
transformers for the supply of medical locations
KS IEC 61558-2-17:1999 - Specification for safety of power transformers, power
supply units and similar apparatus - Part 2-17: Particular requirements for
transformers for switch mode power supplies
KS IEC 61558-2-19:2000 - Safety of power transformers, power supply units and
similar devices - Part 2-19: Particular requirements for perturbation attenuation
transformers
KS IEC 61558-2-20:2000 - Safety of power transformers, power supply units and
similar devices - Part 2-20: Particular requirements for small reactors
KS IEC 62040-1-1:2002 - Uninterruptible power systems (UPS) - Part 1-1: General
and safety requirements for UPS used in operator access areas
KS IEC 62040-1-2:2002 - Uninterruptible power systems (UPS) - Part 1-2: General
and safety requirements for UPS used in restricted access locations
KS IEC 60044-1:2003 – Instrument transformers Part 1: Current transformers
KS IEC 60044-3:2002 - Instrument transformers Part 3: Combined transformers
KS IEC 60044-5:2004 - Instrument transformers Part 3: Capacitor voltage
transformers
KS IEC 61869-1:2010 (Confirmed, 2016) – Instrument transformers Part 1: General
requirements
TZS 284: 2016 - Power transformers – Part 1: General (IEC 60076-1: 2011)
NIS 500:2004 – Specification for power transformers
NIS/IEC 60044-1:2003 – Intsrument transformers Part 1: Current transformers
NIS/IEC 60076-1: 2003 – Power Transformers
Page 41 of 46
Philippine
Accreditation
Bureau
17.
Insulation and
insulating materials
18.
Medical Electrical
Equipment
Page 42 of 46
IEC 60684-1:2003 - Flexible insulating sleeving - Part 1: Definitions and general
requirements
IEC 60454-1:1992 – Specifications for pressure-sensitive adhesive tapes for
electrical purposes
IEC 60383-1:1993 - Insulators for overhead lines with a nominal voltage above 1000
V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test
methods and acceptance criteria
IEC 60383-2:1993 - Insulators for overhead lines with a nominal voltage above 1000
V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test
methods and acceptance criteria
IEC 61109:2008 - Insulators for overhead lines - Composite suspension and tension
insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions,
test methods and acceptance criteria
KS 2495-1:2013 - Pressure sensitive adhesive tapes withplastic base-Specification
part 1: Plasticized PVC adhesive tapes
KS 2495-2:2013 - Pressure sensitive adhesive tapes with plastic base- Specification
Part:2- Polyester adhesive tapes
KS 2495-3:2013 - Pressure sensitive adhesive tapes with plastic base- Specification
part 3: Polyethylene adhesive tapes
KS 2495-4:2013 - Pressure sensitive adhesive tapes with plastic base- Specification
Part 4: Cellulose adhesive tapes
KS 2495-5:2013 - Pressure sensitive adhesive tapes with plastic base- Specification
part 5: Unplasticized PVC adhesive tapes
KS 2495-6:2013 - Pressure sensitive adhesive tapes with plastic base- Specification
part 6: Polypropylene adhesive tapes
KS IEC 60684-1:2003 (Confirmed, 2016) - Flexible insulating sleeving - Part 1:
Definitions and general requirements
KS IEC 60684-3-320:2002 (Confirmed, 2016) - Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 320 - Polyethylene
terephthalate textile sleeving, lightly impregnated
KS IEC 60684-3-406 to 408:2003 - Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 406 to 408 - Glass sleeving
with PVC coating
EAS 137-1: 2000 - PVC Insulations and sheaths of electric cables and cords —
Specification — Part 1: Physical and electrical requirements
IEC 60601-1:2012 – Medical electrical equipment - Part 1: General requirements for
basic safety and essential performance
KS OIML R 114:1995 (Confirmed, 2014) - Clinical electrical thermometers for
continuous measurement
KS OIML R 115:1995 (Confirmed, 2014) - Clinical electrical thermometers with
maximum device
KS IEC 60601-1:2012 - Medical electrical equipment – Part 1: General requirements
for basic safety and essential performance
KS IEC 60601-1:2012 - Medical electrical equipment – Part 1: General requirements
for basic safety and essential performance
KS IEC 60601-1-1:2000 (Confirmed, 2014) - Medical electrical equipment – Part 11: General requirements for safety - Collateral standard: Safety requirements for
medical electrical systems
KS IEC 60601-1-2:2004 - Medical electrical equipment - Part 1-1: General
requirements for safety - Collateral standard: Electromagnetic compatibility Requirements and tests
KS IEC 60601-2-9:1996 (Confirmed, 2014) - Medical electrical equipment - Part 29: Particular requirements for the safety of patient contact dosemeters used in
radiotheraphy with electrically connected radiation detectors
KS IEC 60601-2-11:2004 - Medical electrical equipment - Part 2-11: Particular
requirements for the safety of gamma beam theraphy equipment
KS ISO 80601-2-12:2011 - Medical electrical equipment - Part 2-12: Particular
requirements for basic safety and essential performance of critical care ventilators
Philippine
Accreditation
Bureau
19.
Electric Tools
Page 43 of 46
KS IEC 60601-2-28:2010 - Medical electrical equipment - Part 2-28: Particular
requirements for the basic safety and essential performance of X-ray tube
assemblies for medical diagnosis
KS IEC 60601-2-33:2002 (Confirmed, 2014) - Medical electrical equipment - Part 233: Particular requirements for the safety of magnetic resonance equipment for
medical diagnosis
KS IEC 60601-2-43:2000 (Confirmed, 2014) - Medical electrical equipment - Part 243: Particular requirements for the safety of X-ray equipment for interventional
procedures
KS IEC 60601-2-44:2002 (Confirmed, 2014) - Medical electrical equipment - Part 244: Particular requirements for the safety of X-ray equipment for computed
tomography
KS IEC 60601-2-45:2001 (Confirmed, 2014) - Medical electrical equipment - Part 245: Particular requirements for the safety of mammographic X-ray equipment and
mammographic stereotactic devices
IEC 60745-1:2006 - Hand-held motor-operated electric tools - Safety - Part 1:
General requirements
IEC 60745-2-1:2008 - Hand-held motor-operated electric tools - Safety - Part 2-1:
Particular requirements for drills and impact drills
IEC 60745-2-2:2008 - Hand-held motor-operated electric tools - Safety - Part 2-2:
Particular requirements for screwdrivers and impact wrenches
IEC 60745-2-3:2012 - Hand-held motor-operated electric tools - Safety - Part 2-3:
Particular requirements for grinders, polishers and disk-type sanders
IEC 60745-2-4:2008 - Hand-held motor-operated electric tools - Safety - Part 2-4:
Particular requirements for sanders and polishers other than disk type
IEC 60745-2-5:2010 - Hand-held motor-operated electric tools - Safety - Part 2-5:
Particular requirements for circular saws
IEC 60745-2-6:2008 - Hand-held motor-operated electric tools - Safety - Part 2-6:
Particular requirements for hammers
IEC 60745-2-7:1989 - Safety of hand-held motor-operated electric tools - Part 2-7:
Particular requirements for spray guns for non-flammable liquids
IEC 60745-2-8:2008 - Hand-held motor-operated electric tools - Safety - Part 2-8:
Particular requirements for shears and nibblers IEC 60745-2-8:2003
Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements
for shears and nibblers
IEC 60745-2-9:2008 - Hand-held motor-operated electric tools - Safety - Part 2-9:
Particular requirements for tappers
IEC 60745-2-11:2008 - Hand-held motor-operated electric tools - Safety - Part 2-11:
Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-12:2008 - Hand-held motor-operated electric tools - Safety - Part 2-12:
Particular requirements for concrete vibrators
IEC 60745-2-13:2011 - Hand-held motor-operated electric tools - Safety - Part 2-13:
Particular requirements for chain saws
IEC 60745-2-14:2010 - Hand-held motor-operated electric tools - Safety - Part 2-14:
Particular requirements for planers
IEC 60745-2-15:2009 - Hand-held motor-operated electric tools - Safety - Part 2-15:
Particular requirements for hedge trimmers
IEC 60745-2-16:2008 - Hand-held motor-operated electric tools - Safety - Part 2-16:
Particular requirements for tackers
IEC 60745-2-17:2010 - Hand-held motor-operated electric tools - Safety - Part 2-17:
Particular requirements for routers and trimmers
IEC 60745-2-18:2008 - Hand-held motor-operated electric tools - Safety - Part 2-18:
Particular requirements for strapping tools
IEC 60745-2-19:2010 - Hand-held motor-operated electric tools - Safety - Part 2-19:
Particular requirements for jointers
IEC 60745-2-20:2008 - Hand-held motor-operated electric tools - Safety - Part 2-20:
Particular requirements for band saws
IEC 60745-2-21:2008 - Hand-held motor-operated electric tools - Safety - Part 2-21:
Particular requirements for drain cleaners
Philippine
Accreditation
Bureau
IEC 60745-2-22:2011 - Hand-held motor-operated electric tools - Safety - Part 2-22:
Particular requirements for cut-off machines
IEC 60745-2-23:2012 - Hand-held motor-operated electric tools - Safety - Part 2-23:
Particular requirements for die grinders and small rotary tools
IEC 61029-1:1990 - Safety of transportable motor-operated electric tools - Part 1:
General requirements
IEC 61029-2-1:1993 - Safety of transportable motor-operated electric tools - Part 21: Particular requirements for circular saws
IEC 61029-2-2:1993 - Safety of transportable motor operated electric tools - Part 22: Particular requirements for radial arm saws
IEC 61029-2-3:1993 - Safety of transportable motor-operated electric tools - Part 23: Particular requirements for planers and thicknessers
IEC 61029-2-4:1993 - Safety of transportable motor-operated electric tools - Part 24: Particular requirements for bench grinders
IEC 61029-2-5:1993 - Safety of transportable motor-operated electric tools - Part 25: Particular requirements for band saws
IEC 61029-2-6:1993 - Safety of transportable motor-operated electric tools - Part 26: Particular requirements for diamond drills with water supply
IEC 61029-2-7:1993 - Safety of transportable motor-operated electric tools - Part 27: Particular requirements for diamond saws with water supply
IEC 61029-2-8:1995 - Safety of transportable motor-operated electric tools - Part 28: Particular requirements for single spindle vertical moulders
IEC 61029-2-9:1995 - Safety of transportable motor-operated electric tools - Part 29: Particular requirements for mitre saws
IEC 61029-2-10:1998 - Safety of transportable motor-operated electric tools - Part
2-10: Particular requirements for cutting-off grinders
IEC 61029-2-11:2001 - Safety of transportable motor-operated electric tools - Part
2-11: Particular requirements for mitre-bench saws
IEC 61029-2-12:2010 - Safety of transportable motor-operated electric tools - Part
2-12: Particular requirements for threading machines
IEC 62841-1:2014 - Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 1: General requirements
IEC 62841-2-1:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-1: Particular requirements for handheld drills and impactdrills
IEC 62841-2-2:2014 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-2: Particular requirements for handheld screwdrivers and impact wrenches
IEC 62841-2-4:2014 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-4: Particular requirements for handheld sanders and polishers other than disc type
IEC 62841-2-5:2014 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-5: Particular requirements for handheld circular saws
IEC 62841-2-8:2016 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-8: Particular requirements for handheld circular saws
IEC 62841-2-9:2015 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-9: Particular requirements for handheld tappers and threaders
IEC 62841-2-10:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-10: Particular requirements for
hand-held mixers
IEC 62841-2-11:2018 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-11: Particular requirements for
hand-held reciprocating saws
IEC 62841-2-14:2015 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-14: Particular requirements for
hand-held planers
Page 44 of 46
Philippine
Accreditation
Bureau
IEC 62841-2-17:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-17: Particular requirements for
hand-held routers
IEC 62841-2-21:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 2-21: Particular requirements for
hand-held drain cleaners
IEC 62841-3-1:2014 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 3-1: Particular requirements for
transportable table saws
IEC 62841-3-4:2016 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 3-2: Particular requirements for
transportable bench grinders
IEC 62841-3-6:2014 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 3-6: Particular requirements for
transportable diamond drills with liquid system
IEC 62841-3-9:2014 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 3-9: Particular requirements for
transportable mitre saws
IEC 62841-3-10:2015 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 3-10: Particular requirements for
transportable cut-off machine
IEC 62841-3-12:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 3-12: Particular requirements for
transportable threading machines
IEC 62841-3-13:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 3-13: Particular requirements for
transportable drills
IEC 62841-3-14:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 3-14: Particular requirements for
transportable drain cleaners
IEC 62841-4-1:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 4-1: Particular requirements for chain
saws
IEC 62841-4-2:2017 - Electric motor-operated hand-held tools, transportable tools
and lawn and garden machinery - Safety - Part 4-2: Particular requirements for
hedge trimmers
KS 465:1984 (Confirmed, 2013) - Specification for electric soldering irons
KS IEC 60745-1:1997 - Safety of hand-held motor-operated electric tools - Part 1:
General requirements
KS IEC 60745-2-2:1982 - Safety of hand-held motor-operated electric tools - Part 22: Particular requirements for screwdrivers and impact wrenches
KS IEC 60745-2-3:1984 - Safety of hand-held motor-operated electric tools - Part 23: Particular requirements for grinders, polishers and disk-type sanders
KS IEC 60745-2-4:1983 - Safety of hand-held motor-operated electric tools - Part 24: Particular requirements for sanders
KS IEC 60745-2-5:1993 - Safety of hand-held motor-operated electric tools - Part 2:
Particular requirements for circular saws and circular knives
KS IEC 60745-2-6:1989 - Safety of hand-held motor-operated electric tools - Part 26: Particular requirements for hammers
KS IEC 60745-2-7:1989 - Safety of hand-held motor-operated electric tools - Part 27: Particular requirements for spray guns for non-flammable liquids
KS IEC 60745-2-8:1982 - Safety of hand-held motor-operated electric tools - Part 28: Particular requirements for sheet metal shears
KS IEC 60745-2-9:1984 - Safety of hand-held motor-operated electric tools - Part 29: Particular requirements for tappers
KS IEC 60745-2-11:1984 - Safety of hand-held motor-operated electric tools - Part
2-11: Particular requirements for reciprocating saws (jig andsabre saws)
KS IEC 60745-2-12:1982 - Safety of hand-held motor-operated electric tools - Part
2-12: Particular requirements for concrete vibrators (internal vibrators)
Page 45 of 46