Uploaded by Atif Ali

06-mudlogging sensors

advertisement

Mudlogging Sensors

China National Logging Company

PROFESSIONAL TRAINING

Sensor types

6.

7.

8.

9.

10.

1.

2.

3.

4.

5.

11.

Block Height

Hook load

Stand pipe pressure / casing pressure

Rotary torque

Pit volume

Rotary table speed and pump stroke speed

Mud temperature

Mud density

Mud conductivity

Mud flow out

H

2

S Sensor

MUDLOGGING SENSORS

1. Block Height

Monitor the position of the traveling block, operate as ROP indicator (Measure depth)

Sensor type: Encoder

Rated power supply: +8vDC(Drillbyte Made in China)

Output: pulse

Measure range: 0 ~ 55 m (180 ft)

Resolution: 11 mm (0.4 in)

Accuracy:

0.5% FSD

Signal output : Chart recorder, computer, alarms

Location: drawworks

MUDLOGGING SENSORS

1. Block Height

MUDLOGGING SENSORS

1. Block Height

MUDLOGGING SENSORS

2. Hookload System

Measure the tension on the cable from drawwork.

Location: deadline

Range: 0-7 MPa

Power supply: 24

VDC

Output: 4-20 mA

Working T: -40OC ~

85OC

Attention: high pressure! Install and change when drill string on slip.

MUDLOGGING SENSORS

3. SPP System / Casing Pressure

Range : SPP 0 ~ 42MPa, CSP

0 ~ 68MPa

Power supply: 24VDC

Output : 4 ~ 20 mA

· Precision :± 0.25%

Working temperature : -40 O C

~ 80 O C

Attention: high pressure risk source, when Install and change, check with driller, pressure is “Zero”.

MUDLOGGING SENSORS

4. Rotary torque system-electric TORQ

 Working T: -20 o C ~ 70 o C

 Range: 0-1000A

 Precision: ± 0.25%

 Power supply : ≤18VDC

 Output : 0 ~ 3VDC

Attention: Install on the cable supplying power for motor driving the rotary talbe.

MUDLOGGING SENSORS

4. Rotary torque system-mechanical TORQ

Stress of chains

Stress of chain

Hydraulic pressure

Transducer

0-7MPa Pressure sensor signal

Working parameter same as Hook Load sensor.

Attention: high pressure! Install and change when RPM zero, rotary table stop revolution.

MUDLOGGING SENSORS

5. Pit level sensor

MUDLOGGING SENSORS

5. Pit level sensor

MUDLOGGING SENSORS

6. RPM/SPM

MUDLOGGING SENSORS

7. Mud temperature system

MUDLOGGING SENSORS

8. Mud Density Measuring System

MUDLOGGING SENSORS

8. Mud Density Measuring System

 Working T: -40 o C ~ 80 o C

 Range: 0-3 g/cm 3

 Resolution: 0.01 g/cm 3

 Power supply : 24VDC

 Output : 4 ~ 20 mA

MUDLOGGING SENSORS

9. Mud Conductivity Measuring System

 Working T: -25 o C ~ 70 o C

 Range: 0 ~ 16 S/M

 Precision :± 5% FSD

 Power supply : 24VDC

 Output : 4 ~ 20 mA

MUDLOGGING SENSORS

10. Mud flow out( paddle) system

 Measure range : 0 ~100%

 Working T : -20 o C ~

100 o C

 Maximum angle : 45 o

 Output : 60 Ohm≥R≥930

Ohm

Attention: no definite calibration, relative.

MUDLOGGING SENSORS

11. H2S sensor

Technical Data :

Sensor type: electrochemical

Measure range: 0 ~ 100 ppm

Outside temperature: - 40 ~ 70 ℃

Accuracy: 2 ppm

Signal output: Computer, alarms

Location: Rig floor, shale shaker, caller, mud logging unit

Attention: pay attention to protect sensor head from water and vapour.

MUDLOGGING SENSORS

THE END!

MUDLOGGING SENSORS

Download