Document ID PMTSL, Rev A, Created on 01/16/2019 Copyright © 2019, Lone Star Corporate College All Rights Reserved PRECISION MEASURING TOOLS STEEL RULES AND TAPE MEASURES Steel Rule Tape Measure CALIPERS Dial Caliper Digital Caliper Manual Vernier Slide Caliper Digital Vernier Slide Caliper Inside Spring Caliper Outside Spring Caliper Hermaphrodite Caliper MICROMETERS Outside Dial Micrometer Inside Dial Micrometer Outside Digital Micrometer Inside Digital Micrometer Manual Depth Micrometer Digital Depth Micrometer Manual Screw Thread Micrometer Digital Screw Thread Micrometer Anvil Micrometer Digital Anvil Micrometer HEIGHT AND DEPTH GAGES Dial Height Gage Digital Height Gage Dial Vernier Height Gage Digital Vernier Height Gage Dial Depth Gage Digital Depth Gage Vernier Depth Gage Steel Rule Depth Gage INDICATORS AND OTHER GAGES Dial Test Indicator Digital Test Indicator Back Plunger Dial Indicator Portable Dial Thickness Gage Screw Pitch Gage Pin Gage Lead Gage Ultrasonic (UT) Thickness Gage Customary Metric ☒ ☒ ☐ ☐ Customary Metric ☒ ☒ ☒ ☐ ☒ ☒ ☒ ☐ ☐ ☐ ☐ ☐ ☐ ☐ Customary Metric ☒ ☒ ☐ ☐ ☒ ☐ ☒ ☐ ☐ ☒ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ Customary Metric ☐ ☒ ☒ ☐ ☐ ☒ ☒ ☒ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ Customary Metric ☒ ☒ ☒ ☒ ☒ ☒ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ Document ID PMTSL, Rev A, Created on 01/16/2019 Copyright © 2019, Lone Star Corporate College All Rights Reserved INDICATORS AND OTHER GAGES (CONT) Customary Metric MRP Gagemaker Crest Diameter and Ovality Gage Dial Bore Gage Mechanical Bore Gage Digital Bore Gage Digital Pistol Grip Bore Gage ☐ ☒ ☒ ☒ ☒ ☐ ☐ ☐ ☐ ☐ Customary Metric ☒ ☐ ☒ ☐ ☐ ☐ Customary Metric ☒ ☒ ☐ ☐ Customary Metric ☒ ☐ ☐ ☒ ☐ ☐ ☐ ☐ SURFACE ROUGHNESS TESTERS Customary Metric Surface Roughness Scratch Plates Surface Roughness Profilometer ☒ ☒ ☐ ☐ PROTRACTORS AND ANGLE GAGES Protractor Bevel Protractor with Vernier Scale Combination Steel Rule Depth and Angle Gage GAGE BLOCKS AND SURFACE PLATES Set of Gage Blocks Surface Plate SQUARES Machinist’s Square Solid Square Combination Square Combination Square Set