GCR3-11 | Glass card reader 65 GDB3-10 | Glass door bell • Glass info panel GDB3-10 is part of a comprehensive series of glass iNELS control units for guest room management system (GRMS), and is used to indicate the status of guest requests "Do Not Disturb" and "Make Up Room". • Glass RFID card reader GCR3-11 is part of a comprehensive range of glass iNELS control units and can be advantageously used in all projects, e.g. guest room management system (GRMS). • GCR3-11 card reader is designed for reading smart cards, which are intended to enter the hotel room or any other part of the building. • Thanks to the capacitive touch button, the info panel can also be used for the function of the bell. • GCR3-11 supports RFID media with a carrier frequency of 13.56 MHz. Supported card types MIFARE Ultralight, DESFire 2K (EV1), DESFire 4K (EV1). • Glass info panel is a design component of the iNELS system and is available in elegant black (GDB3-10/B) and white (GDB3-10/W) version. • Info panel printing is possible to customize to the investor requirements. The room number as well as the logo of the hotel can be also printed on each component. • The GCR3-11 is a design component of the iNELS system and is available in elegant black (GCR3-11/B) and white (GCR3-11/ W) variants. EAN code GCR3-11/B: GCR3-11/W: • Input card reader is the first device of guest room management system (GRMS), with which the hotel guest comes into contact first and therefore was designed with an emphasis on representative design. 8595188157476 8595188157483 Technical parameters GCR3-11 Input Illuminance sensor: 1 ... 100 000 Lx Buttons Number of control buttons: Type: Indication: 3 Capacitive Card Type: Output: Illuminance sensor: piezo-changer Switching voltage: 230V AC/ 30V DC Switching output: 2000 VA/AC1; 240 W/DC • GCR3-11 are designed for mounting into an installation box. 3.75 kV, SELV according to EN 60950 8–14 V AC/DC 1x 107 Electrical life AC1: 1x 105 Communication Installation BUS: Dissipated power: Rated current: Network: 0.5°C from the range Number of control buttons: Type: Indication: max. 0.5 W 100-130 mA (at 27V DC), from BUS piezo-changer Vibration motor Supply voltage / tolerance: Dissipated power: Rated current: 0.5 - 1 mm2 BUS + BUS - max. 80 % -20 .. +55 °C -30 .. +70 °C Overvoltage category: Pollution degree: Operation position: IP20 II. 2 on the wall, observing the conditions for correct installation of the thermostat Operating temperature: -20 .. +55 °C Dimensions and weight Storing temperature: -30 .. +70 °C Dimensions: Installation: max. 0.5 W 100-120 mA (at 27V DC), from BUS Storing temperature: Installation: Operation position: 27 V DC, -20 / +10 % Operating temperature: max. 80 % Pollution degree: BUS Connection Relative humidity: Overvoltage category: Do Not Disturb, Make Up Room Tactile output: Operating conditions Protection degree: temperature sensor TC / TZ or * 2x input for free potential contacts (buttons, PIR etc.). Coloured illuminated symbol Acustic output: Protection degree: BUS + BUS - max. 2.5 mm2/1.5 mm2 with sleeve 1 Capacitive Operating conditions 27 V DC, -20 / +10 % terminals, 0.5 - 1 mm2 Connection 1 ... 100 000 Lx Buttons Relative humidity: Connection Data: Temperature measurement accuracy: Terminals: BUS Power supply Supply voltage / tolerance: -20°C to +120°C Power supply Switching frequency Mechanical life: • GDB3-10 are designed for mounting into an installation box. TC/TZ Temperature measurement range: Installation BUS: 300 min-1 10 min-1 YES, the connection between • Individual symbols can be illuminated in one of seven colours - red, green, blue, yellow, pink, turquoise and white. Communication Switching frequency with rated load: 2x AIN/DIN by setting 10-bit • Info panel GDB3-10 is equipped with a sensor for ambient light intensity. Based on information from the sensor it can e.g. switch the lighting circuits in the corridor. AIN1/DIN1 and AIN2/DIN2 Signalling: Connection relay outputs and internal 10 mA / 10 V Resolution: 0.. +55°C; 0.3°C from the range • All versions are in the size of the module (94x94 mm) from the line of luxury switches and sockets LOGUS90 and are therefore fully in line with the design of frames for the sockets of this series, where you can just as for the controllers choose white and black glass frames. Output 20 A/<3s Insulation voltage between without load: Inputs: • All versions are in the size of the module (94x94 mm) from the line of luxury switches and sockets LOGUS90 and are therefore fully in line with the design of frames for the sockets of this series, where you can just as for the controllers choose white and black glass frames. Vibration motor Minimal switched current: measuring: Type of external sensor: 1x changeover 8 A / AgSnO2 YES, built-in temperature sensor Scope and accuracy of temp. • Reader GCR3-11 is equipped with a sensor for ambient light intensity. Based on information from the sensor it can e.g. switch the lighting circuits in the corridor. Tactile output: circuits: Temperature measuring: External temperature sensor: Do Not Disturb, Make Up Room GDB3-10 Inputs • Reader GCR3-11 is equipped with an 8A relay output with AgSnO2 contact for door lock control. Acustic output: Peak current: Technical parameters 13.56 MHz MIFARE Ultralight, DESFire 2K (EV1), DESFire 4K (EV1) • The "Do Not Disturb" or "Make Up Room" statuses can be entered by the hotel guest from a multi-functional touch panel EHT3, glass card holder GCH3-31, glass switch buttons GSB3-20/S, GSB3-40/S, GSB360/S or such GSP3-100 glass switch panel. 8595188157261 8595188115728 • Individual symbols can be illuminated in one of seven colours - red, green, blue, yellow, pink, turquoise and white. Outputs Signalling: • The controller is also equipped with touch button with function of bell and with two icons to indicate the status of guest requests, e.g. “Do Not Disturb" and "Make Up Room", whose state guest can set from multi-function touch panel EHT3, glass card holder GCH3-31, glass switch buttons GSB3-20/S, GSB3-40/S, GSB3-60/S or such GSP3-100 glass switch panel. EAN code GDB3-10/B: GDB3-10/W: Coloured illuminated symbol RFID readers Supported frequencies: • Printing is possible to customize to the investor requirements. The room number as well as the logo of the hotel can be also printed on each component. electric door lock 64 IP20 Weight: into installation box 94 x 94 x 36 mm 154 g II. 2 any into installation box Dimensions and weight Dimensions: Weight: 94 x 94 x 36 mm 161 g * The choice is made in iDM3 for each unit separately.
