Uploaded by frank5.a.fm97

Lab #1

Lab. Report #1
Switch, Luminaire, Power to the switch
Procedure: First I nailed on the boxes, next I pulled the romex and connected them
together with wire connectors. Then I connected the switch and the romex, finally
I connected the romex with the black cord. We tried it and it all worked well.
Materials used: 12/2 wg romex, staples, single gang switch box, round ceiling box,
wire connectors, yellow, red or green. A single toggle switch, a luminaire, one bulb,
black cord.
Tools used: long nose pliers, hammer, wire stripper, lineman pliers, 4” screw driver