Lighting
Libra LED
BGP636 LED30-4S/740 DM50 ALU SRG10 SI 32
LIBRA LED 71 - LED module 3000 lm - 740 neutral white Power supply unit - Safety class I - Dust penetration-protected,
jet-proof - Distribution medium 50 - Aluminum - Side-entry for
diameter 32 to 60 mm
The elegantly styled Libra luminaire is also available in an LED version. As a
fundamental element of the overall design, the bowl has been retained.
Consequently, existing Libra luminaires can be retrofitted as LED fixtures by using
thePhilips standerdized Ledgine O engine.
Product data
General Information
Optic type outdoor
Distribution medium 50
Remarks
* At extreme ambient temperatures the
Lamp family code
LED30 [ LED module 3000 lm]
Light source color
740 neutral white
Light source replaceable
No
Number of gear units
1 unit
Constant light output
Driver/power unit/transformer
Power supply unit
Number of products on MCB of 16 A type 20
Driver included
Yes
B
Optical cover/lens type
Polycarbonate bowl/cover clear
RoHS mark
-
Luminaire light beam spread
154° - 31° x 54°
Light source engine type
LED
Control interface
-
Serviceability class
Class B, luminaire is equipped with some
Connection
Screw connection block 3-pole
serviceable parts (when applicable): driver,
Cable
-
control units, surge protection device, front
Protection class IEC
Safety class I
luminaire might automatically dim down to
protect components
cover and mechanical parts
Product family code
Flammability mark
-
CE mark
CE mark
ENEC mark
-
Light Technical
Warranty period
5 years
Upward light output ratio
Datasheet, 2019, April 29
No
BGP636 [ LIBRA LED 71]
0.4
data subject to change
Libra LED
Standard tilt angle posttop
0°
Standard tilt angle side entry
0°
Surge Protection (Common/Differential)
Luminaire surge protection level until 10 kV
differential mode and 10 kV common mode
Initial Performance (IEC Compliant)
Operating and Electrical
Input Voltage
220 to 240 V
Initial luminous flux (system flux)
2730 lm
Input Frequency
50 to 60 Hz
Luminous flux tolerance
+/-7%
Inrush current
22 A
Initial LED luminaire efficacy
144 lm/W
Inrush time
0.29 ms
Init. Corr. Color Temperature
4000 K
Power Factor (Min)
0.96
Init. Color Rendering Index
70
Initial chromaticity
(0.38, 0.38) SDCM <5
Initial input power
19 W
Power consumption tolerance
+/-11%
Controls and Dimming
Dimmable
No
Application Conditions
Mechanical and Housing
Housing Material
Aluminum
Ambient temperature range
-40 to +50 °C
Reflector material
Polycarbonate
Maximum dim level
Not applicable
Optic material
Polycarbonate
Optical cover/lens material
Polycarbonate
Product Data
Fixation material
Aluminum
Full product code
871869638573900
Mounting device
Side-entry for diameter 32 to 60 mm
Order product name
BGP636 LED30-4S/740 DM50 ALU SRG10 SI
Optical cover/lens shape
Ball, globular
32
Optical cover/lens finish
Clear
EAN/UPC - Product
8718696385739
Overall length
922 mm
Order code
910925864457
Overall width
213 mm
Numerator - Quantity Per Pack
1
Overall height
183 mm
Numerator - Packs per outer box
1
Effective projected area
0.13 m²
Material Nr. (12NC)
910925864457
Color
Aluminum
Net Weight (Piece)
8.400 kg
Approval and Application
Ingress protection code
IP66 [ Dust penetration-protected, jet-proof]
Mech. impact protection code
IK08 [ 5 J vandal-protected]
Dimensional drawing
Libra LED BGP630-637
Datasheet, 2019, April 29
2
data subject to change
Libra LED
© 2019 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for any action in reliance thereon. The
information presented in this document is not intended as any commercial offer and does not form part of any
quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered
www.lighting.philips.com
trademarks of Koninklijke Philips N.V.
2019, April 29 - data subject to change