E3.series Schematic e-Training Course Outline
July 2019
Rev E2
1
Zuken proprietary information, forwarding beyond the intended recipient(s) is not permitted
© Zuken
Disclaimer
COPYRIGHT NOTICE
© 2019 Zuken USA Inc. All rights reserved.
No part of this manual may be reproduced, displayed, modified, translated, distributed or transmitted in any form or for any purpose
without the express prior written permission of Zuken USA Inc. This manual is for your personal use in connection with your company’s
business purposes related to the software. Any commercial use of this manual, including without limitation, sale, license, rental or
lease is prohibited.
TRADEMARK NOTICE
This manual includes registered trademarks and trademarks.
E³.series® is a registered trademark of Zuken E3 GmbH in the USA and other countries.
Zuken® is a registered trademark of Zuken Inc. and its affiliated companies in the USA and other countries.
All other company and product names contained in this manual are trademarks or registered trademarks of their respective owners.
DISCLAIMER
This manual has been prepared with the greatest care. However, Zuken USA Inc. shall not be held liable for any improper or incorrect
use of this manual or information described and/or contained in this manual and assumes no responsibility for your use of this manual
or your operation of the software by using this manual. Neither Zuken USA Inc. nor its affiliated companies shall be liable in contract,
tort or otherwise for any loss, damage, injury, cost or expenses, including without limitation direct, indirect incidental, special or
consequential damages, arising out of your use of this manual or your operation of the software by using this manual.
2
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
E3.schematic Basic Training Course Outline
▪ Estimated 3 hours online*
▪ Estimated 3 hours offline*
▪ *Times may vary depending on the individual
▪ *E3.schematic software installation and environment / data setup required to perform offline tasks
3
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Course Overview
▪ Course 1: Introduction to E³.series
▪ Course 2: Overview of E³.series User Interface
▪ Course 3: Projects, Sheets and Navigation
▪ Course 4: Symbols and Components
▪ Course 5: Connections
▪ Course 6: Advanced Topics
▪ Course 7: Miscellaneous
4
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Course 1: Introduction to E3.series
▪ Introduction to E³.series
▪ Overview of E³.series
▪ E³.series Modules
▪ Features of E³.series
▪ E³.series Flow Chart
▪ E³.series Terminology
▪ Introduction to E³.series Course Quiz
Back to Course Overview
5
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Course 2: Overview of the E3.series User Interface
▪ User Interface
– Launching the tool
– Overview of the Interface
– Main Menu
▪ Database, Project, and Other Windows
– Database Window
– Project Window
– Information Windows
– Visibility Options
▪ Toolbars
– Toolbar Overview
– Customization of Toolbars
– Dock-able Windows and Toolbars
▪ Overview of the E3.series User Interface Course Quiz
Back to Course Overview
6
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Course 3: Projects, Sheets and Navigation
▪
Creating a New Project
– Create a new project
– Adding, Inserting and Deleting Sheets
– Sheet Windows
– Renumbering Sheets
– Arranging and Opening Additional
– Sheet Views
▪
Sheet Properties and Structure
– Sheet Properties
– Sheet Folder Structure
▪
Command Input and Navigation
– Mouse Control
– Zoom Control
– Short Cut Keys (AKA Hot Keys)
– Object Oriented Context Menus
▪
Settings
– Grids, Rulers and Crosshairs
– Global Settings Overview
▪
Projects, Sheets and Navigation Course Quiz
▪
Course 3 – Offline Task
Back to Course Overview
7
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Course 4: Symbols, Components and Devices
▪ Symbol, Component and Device Definitions
▪ Manipulation Techniques
– What is a Symbol?
– Move / Rotate / Mirror
– Symbol Types
– Copy / Paste
– What is a Component?
– Delete
– Component Types
– Purge Unused Objects
– What is a Device?
– Scaling Symbols
▪ Symbols and Component Placement
– Symbol Text
– Multiple Elements
– Placing Components
– Component and Device Properties
▪ Navigation within a Project
– Device Numbering
– Cross References
– Changing a Component
– Jump (Navigation)
– Swapping Component Symbols
▪ Terminals
– Higher Level Assignment and Location
– Placing Terminals
– Creating Devices from Symbols
– Numbering Terminals
– Searching for Components in the Library
Database
▪ Symbols, Components and Devices Course
Quiz
▪ Course 4 - Offline Task
Back to Course Overview
8
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Course 5: Connections
▪ Adding Connections
▪ Wire, Cable and Conductor Modification
– What is a Connection?
– Deleting Wires, Cables and
– Methods for Adding Connections
– Conductors
– On Page / Off Page Connections
– Modifying Cables
– On Page / Off Page Format Settings
– Unconnect / Reconnect
– Signals
– Connect Template Symbol
▪ Connection Modification and Settings
– Modifying the Connect Toolbar
– Moving Connections
– Connection Template Symbols
– Deleting Connections
– Defining the Default Connect Template Symbol
▪ Symbols in a Connection
– Reconnect
– Connection Properties
– Inserting and Deleting Symbols in a Connection
▪ Wires, Cables and Conductors
– Settings for Symbols in a Connection
▪ Connectors
– Insert and Placing Wires
– Insert and Placing Cables
– Connector Description
– Multi Conductor Shielded and Twisted Cables
– Placing Connectors
– Connector Properties
– In Line Connectors
▪ Connections Course Quiz
▪ Course 5 - Offline Task
Back to Course Overview
9
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Course 6: Advanced Topics
▪ Dynamic Assemblies
▪ Table Windows
– What are Dynamic Assemblies?
– What are Table Windows?
– Defining Dynamic Assemblies
– Device Table
– Adding Devices to Dynamic Assemblies
– Sheet Table
– Pin Table
▪ Folder Structures
– Connection Table
– Project Window Folders
– Defining Project Window Folders
▪ Component and Symbol Databases
– Library Database Folders
– Component and Symbol Databases
– Defining Library Database Folders
– Adding Databases
– Selecting Databases
– Defining Database Search
– Configurations
▪ Advanced Topics Course Quiz
▪ Course 6 – Offline Task
Back to Course Overview
10
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Course 7: Miscellaneous
▪ Sub-Circuits
–
–
–
–
▪ Data and Outputs
What is a Sub-Circuit?
Creating a Sub-Circuit
Using a Sub-Circuit
Properties of a Sub-Circuit
▪ Graphics, Text and Dimensions
– Free Graphics
– Free Text
– Dimensions
▪ Fields and Levels
– Fields
– Levels (Layers) add level names to
dialog
–
–
–
–
–
–
–
–
–
Import / Export
Output Data
On-line Terminal Plans
Default Directories
Insert Object - OLE
Insert File
Hyperlinks
Search
Printing
▪ Template Files
– Description of Template Files
– Creation of Template Files
▪ Miscellaneous - Course Quiz
▪ Course 7 - Offline Task
Back to Course Overview
11
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Zuken Global Support
▪ Your connection to support, information,
product updates and more.
▪ https://support.zuken.com/global/home
Back to Course Overview
12
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Zuken Community
Back to Course Overview
13
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
eTraining e3.series Schematic Offline Tasks
Zuken Community
▪ Click Sign in
▪ Not registered, click Sign up
Back to Course Overview
14
Zuken proprietary information. Forwarding beyond the intended recipient(s) is not permitted.
© Zuken 2017
2016
15
Zuken proprietary information, forwarding beyond the intended recipient(s) is not permitted
© Zuken