SOUTHERN CROSS STARLINE
END SUCTION CENTRIFUGAL MOTORPUMPS
RELIABLE SPACE SAVING END SUCTION CENTRIFUGAL MOTORPUMPS
FEATURES
Compact close coupled motorpump
design.
Superior hydraulic design and
manufacturing methods for
significantly higher efficiencies and
reduced maintenance.
High efficiency double curvature
impeller vanes.
32 to 200mm (1 1/4” - 8”) discharge.
Cast iron, zinc free bronze or stainless
steel construction.
AS2129 Table “E” flanges as standard
with optional drillings available.
Back-pullout design does not require
the disconnection and removal of
suction and discharge lines for
maintenance
Choice of high quality WEG TEFC IP55
motors with sealed for life (11kW/15hp
and under) or regreasable (15kW/20hp
and over) motor bearings.
Taper mounted and keyed impeller.
Horizontal or vertical pump discharge
mounting.
APPLICATIONS
OPTIONS
OPERATING LIMITS
Industry
Wear Rings
Capacity
Building Services
Mechical Seals or Packed Gland Seal
Irrigation
Paint and Internal Coatings
Processing
Materials of Construction
Mining
Flange Drillings
Agriculture
Works Certified and Witness Testing
Impeller Turndowns
Pressed or Welded Baseplates
ISSL-IF-0413
Maximum 300 litres/sec
(Max. 4750USGPM)
Head
Liquid Temp.
Maximum 160 metres
(Max. 515 feet)
0˚C to +100˚C
(32˚F - 212˚F)
Up to 140˚C (284˚F) with
high temp. seals
Pumped Liquid
Clean Water
PERFORMANCE
USGPM
50
IGPM
200
100
50
150
100
250
150
500
250
1000
500
1500
1000
2500
1500
5000
2500
600
500
150
Total Head (m)
80
300
200
60
50
40
970RPM
(6 POLE)
30
100
20
Total Head (feet)
100
400
1480RPM
(4 POLE)
2900RPM
(2 POLE)
50
40
10
30
8
20
6
5
15
3
4
10
5
6
20
8
10
30
20
30
40 50
70
150
250
Flow Rate (litres/sec)
50
100
Flow Rate (m3/hour)
100
150
500
200
300
1,000
MATERIALS OF CONSTRUCTION
Description
Volute Casing
Material
2
Cast Iron
Impeller Nut & Lock Washer
316 Stainless Steel
Optional Material
1
Zinc Free Bronze
316 Stainless Steel1
Backplate 2
Cast Iron
Zinc Free Bronze1
316 Stainless Steel1
Impeller
Cast Iron
Zinc Free Bronze
316 Stainless Steel1
2
Shaft Key
Shaft
Support Foot
Volute Casing Plug
Impeller Key
Casing O-Ring
Mechanical Seal 3
Wear Rings
1
Key Steel
431 Stainless Steel
316 Stainless Steel1
Mild Steel
Zinc Free Bronze1
316 Stainless Steel1
Lurene
EPDM
Viton
C/Cer/Nitrile
SiC/SiC/Viton
Mild Steel Zinc Plated
Key Steel
Nitrile
Zinc Free Bronze
1. Material options only available with Star-Pro pumps.
2. Other material options such as SG Iron Duplex, Super Duplex, Durimet 20, CD4MCu, marine bronze, Ni-Resist and other exotic materials are available on an
ETO basis. Contact Pentair Southern Cross or your local Southern Cross dealer for further details.
3. A range of mechanical seals are available including high temperature, hydro carbon, sea water and other options to suit particular applications and operating
conditions.
PENTAIR SOUTHERN CROSS
8618 Warrego Highway, Withcott, QLD 4352, Australia. www.southerncross.pentair.com
All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners.
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
Pentair is an equal opportunity employer.
A.B.N. 83 000 922 690 © 2013 Pentair, Ltd. All Rights Reserved.
© 2013 Pentair Southern Cross