Reference edge of block
(3)
Encoder cable outlet
(4)
(7)
(8)
(2)
Position of lubrication connection
Pos. 1, 2: frontside lubrication
Pos. 3, 4, 5, 6: side lubrication
Pos. 7, 8: lubrication from above
Position of encoder cable outlet
Standard (solid line)
Optional (dashed line)
Reference edge of rail
(1)
(6)
(5)
Reference edge of rail
Reference edge of block
3
Rail 1 1
7
5
4
8
2
6
3
1
7
7
5
4
6
2
3
1
7
7
5
4
6
2
Rail 2
3
1
7
4
8
2
3
1
7
7
4
2
3
1
7
7
4
5 6 5 6 5 6
If the E
1/2 of E
1/2
dimensions are not indicated, the maximum possible number of mounting holes will be determined under consideration
min and will be carried out symmetrically.
Without specifying, the following standard lubrication adapters will be used.
– Frontside lubrication (Pos. 1, 2): M6 × 0.75 × 67.5°
– Side lubrication (Pos. 3, 4, 5, 6): M6 × 0.75 × 0°
For multi-part rails please specify the section lengths of each rail and the required E
1
and E
2
values.
2
HIWIN GmbH
Brücklesbünd 2
D-77654 Offenburg
Phone +49 (0) 7 81-9 32 78-0
Fax +49 (0) 7 81-9 32 78-90
Internet: www.hiwin.de
Email: info@hiwin.de