Run Win Loader
At the main menu,
select F6, 623-60
Software
Configuration
From the 623-60
Software Configuration
Menu, select F3,
System Type and File
Loads
From the System Type
and File Loads menu,
Toggle F5 so the Edit
Paths and files function is
ON.
Press the Escape key to
return to the previous
menu, then select F8,
Save Configuration.
Accept the filename
“Loader” and overwrite.
Escape back to the Main
Menu and select F1, 620
Loader/Monitor to connect
to a processor or F2, Stand
Alone Loader
too work offline.
If selecting F1, place the
processor’s keyswitch
into the Program
position.
If select F1, 620
Loader/Monitor to
connect to a processor, a
menu showing the
connected processor’s
attributes will be
displayed.
Press F5 to Edit
Processor configuration
or F6 to edit the I/O
Configuration.
From the Processor
Configuration menu,
toggle the F1-F5 keys to
enable or disable the
function as desired. Then
Press Enter to send these
selections to the 620
Processor and return to
the 620 selection menu.
From the 620 Selection
menu pressing F6
displays the following
menu. Press the F1,
Mode key to configure
the rack type.
Toggle the F2 key until the
display looks like the actual
Processor rack.
Select F1 to return to the
previous menu.
DO NOT select F3 as this
feature is seldom used.
Toggle the F2-F6 keys to
select the appropriate I/O
of SLM module type to be
placed into the specific
slot in the Processor
rack.
Then, Press Enter to
Install the configuration to
the Processor. The
display will return to the
620 Selection Menu.
Press ENTER until line 0
is displayed (about 4
times).
Press <Shift> and F1
together to change the
software from Monitor
Mode to Program Mode
Press <Shift> and F2
Together to access the
Auxiliary Menu. Then
Select F2 to access the
Upload/Download
functions.
Press F7 to edit the
pathname to the desired
drive/directory
Then Press F2 to Load a
ladder file to the
processor, you will be
prompted for the filename
OR--- Press F1 if you wish
to Save a ladder file from
the Processor to the PC.
Once the desired
operation is complete,
press the Escape key until
the ladder logic screen is
displayed.
Continue to the next
slide if you wish to work
in the stand Alone
(offline mode)
Escape back to the Main
Menu and select F1, 620
Loader/Monitor to
connect to a processor or
F2, Stand Alone Loader
too work offline.
If working in Stand
Alone mode, toggle the
appropriate Function
key to select the
processor type to be
used, then press
ENTER.
At the 620 Selection
Menu press ENTER
When prompted to
Load? Ladder Logic?
The default is “Y”,
Press ENTER
When prompted, enter the
desired pathname, and
press ENTER
When prompted, enter
the desired filename,
and press ENTER.
Continue to press Enter
Until Line one of the
ladder logic is displayed.