4.
Features
Type
Temperature
range
Design
Display
Timer
Incubator
Requires Specification
Microprocessor controller
incubator
Ambient +3°C to 60°C
Microprocessor PID control/
temperature calibration/
automatic tuning
Free from noise, vibration and
mechanical troubles by film type
heating method
Intuitive control panel with bright
LED display
Dual wait on/off timer modes. (1
min. to 99 hr. 59 min.)
Temperature
setting
Convenient preset function for 3
most commonly used temperature
setting
Inner door
Inner tempered-glass door
Heating element
Corrosion-resistant incoloy
sheath heating element and
stainless steel interior
Rounded inner chamber corners
for easy cleaning and optimal
airflow
65 lit
Corner design
Chamber
volume
Temperature
fluctuation
0.2 deg C at 37 deg C
option
Offered
specification
Model: BDS-65DD
Model: BDS65DD
Make:
Country of origin:
Ambient +5°C to
60°C
Ambient +5°C
to 60°C
Not applicable
Not applicable
With seven segment
Display
Single timer will
count down when
rich the set
temperature (1 min
to 99 hr. 59 min.)
Not applicable
LCD Display
Double door ( one
door glass and other
from stainless steel
)
Dual wait
on/off timer
modes. (1 min.
to 99 hr. 59
min.)
Convenient
preset function
for 3 most
commonly
used
temperature
setting
Double door (
one door glass
and other from
stainless steel )
Easy clean inner
chamber
Easy clean
inner chamber
Dimension
Safety
Certification
Authorization
423x355x445 mm
Automatic run after power
interruption
Keypad lock function prevents
accidental change during
operation
Not applicable
Not applicable
Over-temperature and overcurrent protection
Audible and visible open door
alarm
Automatic run after power
interruption
CE, ISO
Manufacture authorization letter
must be submitted
Box Dimension : 78*70*85 cm
Not applicable
Price = 5800 L.E
6.
Features
Water bath
Requires Specification
Controller
Model:
Make:
Country of origin:
Microprocessor PID temp.
control/ automatic tuning
Digital LED displays with quick
adjustable dial knob.
Display
Design
Circulation
Temperature
range
Over
temperature
protection
Bath volume (L
/ cu ft)
Temperature
stability (C0/F0)
Bath opening/
depth
Low-profile design with sloped
control panel for easier access
and batter safety
Inner circulation system using
agitator
Amb. +50C to 1000C
Over-temperature protection with
alarm
20/0.7
+/-0.1/ 0.18
498x300x200 mm
Keypad lock
function
prevents
accidental
change during
operation
Offered
specification
WB-20D
Seven segment
Display with push
bottom switches
Amb. +5C to 100C
Price = 17800
L.E
Net weight
Electrical
requirements
Certificates
Less than 16 kg
(230V, 50/60Hz)
CE, ISO 9001
Price = 3700 L.E
13
Features
Type
Control
Sterilization
temperature
Sterilization
system
Monitoring
Display
LED lamp
Pressure gauge
Lowmaintenance
Safety
Mechanical
safety devices
Safety warring
system
Carton Dimension 49*45*30
cm
Autoclave
Requires Specification
Model:
Make:
Country of origin:
Vertical
Microprocessor PID Control
110 to 1230C
Automatic sterilization system
for unattended operation.
-Heating >Check safe>
Sterilization > Sterilization safe>
Exhausting > End
Conveniently monitored by an
independent control display,
sterilization process display, and
pressure gauge.
VFD for visualization of temp,
pressure, timer, warning alert
checks.
LED lamps for sterilization
process check
Easy pressure check with the
standards gauge attached to the
front
The chamber is constructed of the
stainless steel which is superiorly
resistant to corrosion
Over current protection.
Over temperature protection by
automatic power cut off.
Over pressure protection by
automatic and manual safety
value.
Over temperature warning
Low temperature warning
Low water level warning
Offered
specification
Door
Chamber
volume (L)
Timer
No. of baskets
(standard/ max.)
Load per baskets
(kg/ ibs)
Standard
accessories
Authorization
letter
16
Features
Low heat warning if the
temperature does not reach the
sterilization or melting
temperature
Sterilization fail warning if the
operation is unexpectedly
stopped during sterilization
process
Slide opening door with plastic
cover of low thermal conductivity
prevents burns from the contact
50 lit
0 to 999 min.
2/2
10/ 22.0
Baskets (2ea), heater cover,
exhaust tank, drain bucket,
pressure sensor
Manufacturer authorization
required
Shaking incubator with cooling
Requires Specification
Display
Model:
Make:
Country of origin:
Required specification
Digitally controlled shanking
incubator
Temperature and RPM
Compressor
Working
temperature
Circulation fan
Fitted with standard
5 C to 60 C or 10 C to 60 C when
lights are ON.
One fitted inside the chamber
Motor
Shanking speed
Temperature
D.C. drive motor
20-180 RPM
Controlled by digital indicator
cum controller
Tube lights
Temp. Accuracy
Temp.
2 Nos.
± 1°C
0.1°C
Features
Controller
Offered
specification
BDS-104-C
Temperature and
RPM and Timer
Two fans inside the
chamber
Seven segment
display with PID
controller with
audible and visible
alarm
LED >> Two Lines
readability
Tray
Safety features
9 flask of 250 ml flask
M.C.B. is provided at the mains
of the connection
Overheat controller is provided
additionally which protect to
control in case of controller
failure
Fuses are provided on ever
electrical line to safeguard each
and every component.
Price = 18000 L.E
17
Features
Controller
Display
Compressor
Working
temperature
Circulation fan
Motor
Shaking speed
Temperature
Tube lights
Temp. accuracy
Temp.
readability
Tray
Safety
18
Features
Set temperature
rang in 0C
Setting accuracy
temperature
Temperature
Carton Dimension 90*77*132
cm
Shaking incubator with cooling
Requires Specification
Offered
specification
Model:
Make:
Country of origin:
Digitally controlled shaking
incubator
Temperature and RPM
Fitted with standard
5C to 60 C or 10 C to 60 C when
lights are ON.
One fitted inside the chamber
D.C. drive motor
20-180 RPM
Controlled by digital indicator
cum controller
2 Nos.
±10C
0.10C
9 flask of 250 ml flask
Overheat controller is provided
Plate incubator
Required specification
Model:
Make:
Country of origin
Min. 50C above ambient up to
+80°C
0.1°C
1 Pt 100 sensor DIN class A in 4wire-circuit
Offered
specification
Control
COCKPIT
Timer
Function set
point WAIT
Calibration
Adjustable
parameters
Convection
Fresh air
admixture
Vent
Temperature
control
Auto diagnostic
system
Door
Internals
Voltage
electrical load
Volume
Dimension
internal
Housing
standard
Authorization
Single display. Adaptive
multifunctional digital PIDmicroprocessor controller with
high-definition TFT-colour
display
Digital backwards counter with
target time setting, adjustable
from 1 minute to 99 days.
The process time does not start
until the set temperature is
reached
Three freely selectable
temperature values
Temperature (Celsius or
Fahrenheit), air flap position,
program time, time zones,
summer time/winter time.
Natural convection
Adjustment of pre-heated fresh
air admixture by air flap control
in 10% steps.
Vent connection with restrictor
flap
Adjustable electronic over
temperature monitor and
mechanical temperature limiter
TB, protection class 1 according
to heating approx. 200C above
nominal temperature
For fault analysis
Fully insulated stainless steel
door with 2-pont locking
(compression door lock)
Easy-to-clean interior, made of
stainless steel, reinforced by deep
drawn ribbing with integrated and
protected large-area heating on
four sides.
230V, 50/60 Hz
Approx. 1400 W
108 1
W(A) x h(B) x d (C): 560 x 480 x
400 mm
Rear zinc-plated steel
DIN EN ISO 13485
CE 93/42/EWG
DEN EN ISO 9001
Manufacturer authorization letter
must be submitted