Auxiliary boxes
A
heating elements.
Specification:
- default one box
- stator Pt-100
- bearing Pt-100 (optional, variant code 107)
- separate box for heating elements
Specification:
Material designation
Material standard
Surface treatment
Al-Si10Mg (pressure die cast)
EN 573-3
RAL 7001 (grey)
Other features:
- equipped with assembly rail ARH 22
(DIN-35, 35x203 mm)
- main dimensions 125x222x81
- degree of protection IP 66 (IEC 529)
- gasket material polyurethane
- temperature resistance -55 - +80°C
- max. terminal blocks: 34 pcs 2.5 mm2
28 pcs 4.0 mm2
- weight 1.6 kg
M000248
Accessory box
M
M000249
Accessory box for heating elements
2
ABB/ BU Machines / HV Motors for COG / Non-sparking EN 02-2008
Bigger auxiliary box
M000355
-
stator Pt-100 (6 pcs)
bearing Pt-100 (optional, variant code 107)
separate box for heating element (variant
code 450/451)
- dial type thermometers for bearings
(optional, variant code 651/652)*
- Pt-100 (12 pcs) inside stator slots
(optional, variant code 653)*
- Provision for vibration sensors (optional,
variant code 654)*
* The bigger auxiliary box is needed if any of
these variant codes is selected.
Option with bearing dial type thermometers
- Measuring range 0…120 °C
- Degree of protection: IP65 (IEC529)
- Temperature durability of display -40…+60 °C
- Ex i approved
ABB/ BU Machines / HV Motors for COG / Non-sparking EN 02-2008
M
Other features:
- equipped with assembly rail ARH 22 (DIN-35)
- main dimensions 230x330x180
- degree of protection IP66 (IEC 529)
- gasket material silicone
- temperature resistance -55 - +100°C
- weight 5.6 kg
Specification:
Material designation
Material standard
Surface treatment
Al-Si12Mg (die cast)
EN 573-3
RAL 7001 (grey)
M000357
-
-
M
Temperature durability of capillary tube
-40…+100 °C
Without contacts (optional, variant codes 651)
2